BFN(T) Veerteruggangmotor Belimo Servomoteur Belimo Servomotor Belimo K129-A-08/2015

Transcription

1 BFN(T) Veerteruggangmotor Belimo Servomoteur Belimo K9-A-08/05 Rf-Technologies nv - Lange Ambachtstraat Oosterzele - Belgique - Tel Fax info@rft.be

2 BFN(T) Product K9 - A 08/05 presentation The spring return actuator BFN(T) is specially designed to remotely control fire dampers. The BFN(T) model is intended for fire dampers with large dimensions (ø > 400 mm (CR) or W+H > 00 mm (CU, CU-5, CU4, CA)) or for dampers (s), CR60, CR0 with a production date before /7/ locking button plug (ST) access for manual resetting thermo-electric tripping device (T) Options - at the time of order SN BFL/BFN Bipolar beginning and end of range switch CR60(s) CR0 Kit BFL Kit BFN Kit BF Application prod. < /7/05 CR 400 -s CU 00 CR60(s) CR0 prod. /7/05 CR 400 -s CU 00 CR>400 CU>00 for fire dampers CR60 CR0 CR CU4 CU-5 CA List CR>400 CU>00 -s CU of parts Description Code Quantity Actuator Belimo BFN0 / BFN 4 / BFN4-ST / BFNT0 / BFNT4 / BFNT4-ST Base plate motor FE-VOOR-E55 Axis motor DB-D007 4 Position indication (Arrow) T-BELI-STAN 5 Key manual operation motor T-BELI-HAND 6 Reduction axis motor T-BELI-REDU 7 Fastening bolt base plate (for dampers of type CR, CU, CU-5, CU4 and CA) DIN 9 M6x0 8 Fastening bolt motor (for dampers of type CR, CU, CU-5, CU4 and CA) DIN 9 M5x60 9 Fastening bolt motor for old dampers (for dampers type CR60, CR0, and -s) DIN 9 M6x65 0 Plug for models without fusible link (T) (for dampers type CR60, CR0, and -s) CR60-D08 Plug for models without fusible link (T) (for dampers type CR, CU, CU-5, CU4 en CA) PLUG-FTE KIT label (yellow) ETIK-D04 0

3 K9 - A 08/05 Electrical wiring diagram N ME L C S 4VAC 0VAC FCU S4 DCU <5 <80 NF S NO S C NF S5 NO S6 Frequency 50/60 Hz Switch points 5 / 80 Rotation angle Max. 95 Direction of rotation Clockwise (L side up) Duration test 0000 Working temperature Max. +50 C Maintenance Maintenance free Detailed characteristics MEC Nominal voltage motor Power consumption (stand-by) Power consumption (operating) standard switches running time motor running time spring noise level motor noise level spring connection supply / control Connection auxiliary switch Protection class Drive torque motor Weight (kg) BFN4 BFN4-ST BFNT4 BFNT4-ST 4VAC / 4VAC / 4VAC / 4VAC / W 4W ma...a, AC 50V < 60 s 0 s 55 db (A) ca. 70 db (A) W 4W ma...a, AC 50V < 60 s 0 s 55 db (A) ca. 70 db (A),W 4W ma...a, AC 50V < 60 s 0 s 55 db (A) ca. 70 db (A),W 4W ma...a, AC 50V < 60 s 0 s 55 db (A) ca. 70 db (A) BFN0 0VAC,5W 5W ma...a, AC 50V < 60 s 0 s 55 db (A) ca. 70 db (A) BFNT0 0VAC,8W 5,5W ma...a, AC 50V < 60 s 0 s 55 db (A) ca. 70 db (A) m, x 0.4 mm² m, x 0.75 mm² m, x 0.4 mm² m, x 0.75 mm² m, x 0.75 mm² m, x 0.75 mm² m, 6 x 0.75 mm² m, 6 x 0.75 mm² m, 6 x 0.75 mm² m, 6 x 0.75 mm² m, 6 x 0.75 mm² m, 6 x 0.75 mm²,4,4,5,5,4,5 English Operating mechanism BFN(T) Unlocking manual unlocking: place the locking button on unlock. (For types BFNT: the damper can alternatively be unlocked by pushing the test button on ) automatic unlocking: reacts as soon as the temperature reaches 7 C (type BFNT). remote unlocking: by AUTO (T) 7 C The thermo-electric fuse will not move the damper into its safety position (when the temperature reaches 7 C) if the motor is not powered. Resetting manual resetting: turn the enclosed handle anti-clockwise. To block the motor, place the locking button on lock motorised resetting: switch off the power supply for at least 0 seconds. Supply the actuator (respect the prescribed voltage) for at least 75 seconds. The resetting stops automatically when the end of range is reached (damper open) - it takes about 60 seconds to reset the damper - or when the power supply is interrupted Do not use a drill or screwing machine. Stop as soon as the motor is completely rearmed (end of range). The mechanism may never be tested on its own, without being attached to the fire damper. Such a test might damage the mechanism or the operator might be injured.

4 K9 - A 08/05 Mounting Dismantling the mechanism Type BFN(T) on CR/CU/ CA/CU4/CU-5: Type BFL(T) on CR60/CR0/ (s): Type BF(T)/BLF(T) on CR/CU/CA/CU4/CU-5:. Unlock the motor by. Loosen the two fixing. For types BFNT: unscrew. Unlock the motor by. Loosen the two fixing. For types BFLT: unscrew. Unlock the motor by. Loosen the fixing bolts of the motor and remove the old motor.. For types B(L)FT: unscrew the thermoelectric fuse and remove it. 4. Loosen the three screws and remove the base plate. Set aside the operating arm, bolt and washer to use on the new base plate. Type BLF(T) on CR60/CR0/ (s): Type MFUS(P): Type CFTH:. Unlock the motor by. Loosen the two fixing. For types BLFT: unscrew. Unlock the existing mechanism by pressing the unlocking button.. Loosen up the two fixing screws and dismantle the mechanism.. Replace the old membrane by the new (unperforated) one.. Unlock the existing mechanism.. Loosen up the three fixing screws and dismantle the mechanism.

5 K9 - A 08/05 Mounting of the mechanism On damper type CR, CU, CU-5, CU4, CA:. Mount the axis on the base plate. Use universal grease around the axis.. Retrieve the operating arm, bolt and washer of the old mechanism and mount them on the new base plate.. Mount the base plate with the enclosed screws on the tunnel of the damper. 4. make sure the operating arm is fitted in the transmission arm. 5. Make sur the damper blade is closed. 6. Place the position indicator arrow on the motor on position Fix the motor, L side visible, with screws and spring washers. 8. Connect the motor according to the wiring diagram. 9. Place the thermoelectric fuse on the plate and fix with screws (type BFNT). If the old motor was not equipped with a thermo-electric fuse, the membrane must be perforated first. 0. Test that the motor functions properly.. Apply the label 'KIT' to the motor and fill in the details. English On damper type CR60, CR0, (s):. Make sur the damper blade is closed.. Place the position indicator arrow on the motor on position 0.. Fix the motor, L side visible, with screws and spring washers. 4. Connect the motor according to the wiring diagram. 5. Place on the holder and fix with screws (type BFNT). If the old motor was not equipped with a thermo-electric fuse, the membrane must be perforated first. 6. Test that the motor functions properly. 7. Apply the label 'KIT' to the motor and fill in the details. If the product is manipulated in any other way than described in this manual, Rf-Technologies will decline any responsibility and the guarantee will immediately expire!