Catalogue geared motors PMSM. Edition 10/2013. Page
|
|
- Gary Myles Johnston
- 6 years ago
- Views:
Transcription
1 atalogue geared motors PS Edition /0 0 Gearboxes and Lubrication Standard mounting BG and BF BK and BS Position of the terminal box and the cable entry BG and BF BK and BS Radial and axial forces at the output shaft Dimensions and fits of output shafts and keyways Installing transmission elements Gear with solid shaft Gear with hollow shaft Shrink disc coupling Torque restraint Notes for installing shaft mount gears with hollow shaft and keyway Gear ventilation Output shaft seals Page Lubricants Lubricant quantities Lubricant quantities, BGseries gears Lubricant quantities, BG00R Lubricant quantities, BFseries gears Lubricant quantities, BKseries gears Lubricant quantities, BSseries gears Lubricant quantities, prestage gears (Z) Lubricant quantities, intermediate gears Position of threaded plugs BGseries gears BG00R BFseries gears BKseries gears BSseries gears prestage gears (Z) Position of the drain plugs in the System over PBGEN
2 Standard mounting positions BG Series Gear side (U) (R) (L) (O) (V) (H) (U) (V) (H) ounting position (foot housing) cast foot with clearance holes (ode.) ounting position B (attachment housing with flange or foot mounting) flange with threaded holes (ode./ode./ode./ode.) H B H B H B H V foot with threaded holes (ode.) foot with clearance holes (ode.) H V H B V V BF series Gear side (R) (L) (O) (U) (V) (H) ounting position H H H H V V BF series H H H H V V PBGEN
3 Standard mounting positions bslage BK series Gear side ounting position BS series Reihe BK Gear side ounting position Reihe BS (U) H H (O) H (R) H (U) (O) (R) (L) H H H H V V (L) H (V) V (H) H H H V V H H H H (V) V (H) V V PBGEN
4 Getriebemotoren gama Geared моторредуктор coaxiaux BG otors Gearboxes & Lubrication Postion of the terminal box BGKL BGKL Stand:.0.0 / ts Position of the terminal box and the cable entry points (BG and BF) The standard position of the terminal box for helicalgear and shaft mounted geared motors is position I. ables may be introduced from side or. Getriebe(otoren) Gear otorreductoresplanos Plan оторредуктор (otors) complémentaire motoréducteur Zusatzmaßbilder dditional dimensiones Dimension complementarios Sheets THE GER OTOR SPEILIST II I IV II I IV III zum Getriebe Beispiel für Bezeichnung II IV Beispiel für Bezeichnung always show the position of the terminal box and the cable entry in relation to the gearbox Klemmenkastennordnung I / II Turning or rotating the gearbox in space in the different mounting positions according to DIN 0 does not influence the marking as shown. The details of the terminal box and not in space. The mounting according to DIN 0 is to be given separately. I THE GER OTOR SPEILIST Lage des Klemmenkastens zum Getriebe Tatsächliche В отдельных La ejecución Getriebeausführung La случаях real The géométrie de actual размеры los equipos réelle gearbox kann могут peut von puede Seite design varier отличаться der variar dargestellten Leitungszuführung can par vary de rapport la от from geometría указанных Geometrie à the cette geometry représentation. representada. на abweichen. чертеже. shown. IV BFKL III II IV Stand:.0.0 / ts Tatsächliche В отдельных La ejecución Getriebeausführung La случаях real The géométrie de actual размеры los equipos réelle gearbox kann могут peut von puede design varier der отличаться variar dargestellten can par vary de rapport la от from geometría указанных Geometrie à the cette geometry représentation. representada. на abweichen. чертеже. shown. I I BFKL 0 PBGEN
5 Position of the terminal box Position of the terminal box and the cable entry points (BK and BS) The standard position of the terminal box for bevelgeared and worm geared motors is position II. able entry through side or side is possible II I IV II I IV III III II IV II IV Turning or rotating the gearbox in space in the different mounting positions according to DIN 0 does not influence the marking as shown. The details of the terminal box always show the position of the terminal box and the cable entry in relation to the gearbox and not in space. The mounting according to DIN 0 is to be given separately. I I PBGEN
6 Gearboxes Radial and axial forces at the output shaft Dimensions and fits of output shafts and keyways Installing transmission elements Gear with solid shaft Gear with hollow shaft Shrink disc coupling The output shafts and outputshaft bearings are matched to the motor torques. It is advisable to locate the drivetransmission element s point of application as close as possible to the shaft collar to ensure that the load imposed by external radial forces is not unnecessarily high. Permissible values for radial forces referred to the output shaft centreline are listed in the selection tables. Please consult us if your application involves extrahigh axial loading. Output shaft and second shaft stub, keyway and key are in compliance with the DIN standards and ISO fits listed below: Solid shaft Shaft diameter to D = 0 mm in ISO k (DIN Page) as of D = 0 mm in ISO m (DIN Page ) Keyway ISO P (DIN Page ) Key, height ISO h (DIN Page and DIN 0) Bore customer ISO H Hollow shaft with keyway Bore diameter ISO H (DIN ) Keyway ISO JS (DIN Page ) Key, height ISO h (DIN Page and DIN 0) ustomer shaft ISO h Hollow shaft for shrinkon disc coupling (SSV) Outside diameter ISO f Inside diameter ISO H ustomer shaft ISO h Note: Gearboxes using torque reaction by means of a flange (ode.; ;.;.;.) or torque arm (ode.), must have the side for the torque reaction the same as where the radial force on the output shaft occurs (see rubber buffers for torque arms)! Please consult the factory for other designs. lways exercise meticulous care when fitting transmission elements onto output shafts and, whenever possible, use the DIN tapped bore provided for this purpose. Fitting is usually easier if the transmission element can be heated to approximately 0 for installation. Dimension the locating bore to ISO H. Gears with solid shaft at each end (gear code./): alignment of the two keys is subject to the DIN tolerances, the degree of accuracy is fine. Hollow shafts usually engage solid shafts of the driven machinery. The gear unit must be mounted such as to be free of constraint and be fixed axially (e.g. by means of assembly help acc. following description notes for installing shaft mount gears with hollow shaft and keyway ). Special contract provision must be made if the hollow shaft has to guide the solid shaft or, for any other reason, close outofround tolerance referenced to a point on the gear housing (such as a flange, for instance) is required. shrink disc coupling (SSV) can transmit high torque from the non grooved hub to the smooth shaft. The SSV is easily secured and released, using commercially available bolts. SSVs are the ideal supplement for shaft mount gears. The maximum transmittable torque for the selected shrink discs when fitted and mounted according to instructions is above the breakaway torque of the respective motors classified as standard (for classification of shrink disc sizes see chapter,, dditional dimensional drawings for Shrink disc coupling) PBGEN
7 Gearboxes Torque restraint Notes for installing shaft mount gears with hollow shaft and keyway Gear ventilation Output shaft seals Shaftmounted geared motors require a suitable torque restraint to resist the reaction torque. Shaftmounted gears have cast torque arms as standard. Bevel gears and worm gears are available with bolton torque arms on request. The torque arm is screwed onto the front V on the side of the gear unit. It is always important to ensure that the torque arm does not create excessive constraining forces due to the driven shaft running untrue, for example. Excessive play can result in excessive shock torques in switching or reversing operations. onsequently, we recommend the use of pretensioned rubber damping elements. These rubber buffers are part of the scope of supply for designs with a torque arm (see chaper,., dimensional drawings Rubber buffer for torque restraint ) () ttaching the hollow shaft to the customer shaft Threaded bolt (d) is screwed into the end thread of the shaft to be driven. By tightening the nut, apply force to thrust plate (b) and locating ring (c) to draw the gear unit onto the shaft. () xial fastening Pressure piece (b) is rotated and fitted against retaining ring (c) using fixing screw (a). () Removing Extractor (f) is fitted between the end face of the shaft and retainer ring (c). Tighten pressoff screw (e) against the end of the shaft and pull the gear unit off the shaft. anufacturing drawings for the required parts are available on request. These parts are not included in the scope of supply. Detailed information on shaftmounted gear units, bevelgear units and wormgear units is available (see chaper,., dimensional drawings Tools for fitting shaftmounted gear with hollow shaft and keyway ). The lifetime of the gearbox lubricant increases the better it is protected from negative environmental influences. Should the oil level or the gearbox ratio cause a very high lubricant temperature, the gearbox will be supplied as standard with a breather plug. Either on request or for corresponding high ambient temperatures, all gearboxes from size can be supplied with a breather plug. For the position of the threaded plugs see chapter theraded plugs. ll size and larger gears are available with double seals for the output shaft on request and at extra cost. Double seals are particularly effective if the output shaft points down and as protection against external influences PBGEN
8 Lubricants Lubricants GIP BLSI 0 RL BEHE RHUS DEGOL BB0 DEGOL BG0 STROIL SO0 DEGOL GS0 DEGOL GS0 BP ENERGOL GRXP0 ENERSYN SGXP 0 ENERSYN SGXP 0 STROL HEVRON LPH SP 0 LPH BB 0 OPTIGER B 0 TRIBOL 0/0 GERTEX EP SE W0 eropa 0 FUHS RENOLIN LP 0 RENOLIN LPF 0 SUPER KLÜBER KLÜBEROIL GE 0 N OBIL OBILGER 00 XP 0 OBILUBE HD PLUS 0W0 OEST Gearol LP 0 SHELL OL S G0 FLON LP 0 lphasyn T RENOLIN UNISYN LP OBIL SH Synlube WS RENOLIN PG KLÜBER SYNTH GH0 LPHSYN PG 0 TRIBOL 00/0 LPHSYN GS 0 LPHSYN PG 0 TRIBOL 00/0 LPHSYN 0 STROL OPTILEB GT 0 STOL TRIBOL FOOD FROOF 00/0 Synlube WS 0 Synlube WS 0 hevron lubricating oils F 0 (US) RENOLIN PG 0 RENOLIN PG 0 KLÜBERSYNTH GH0 KLÜBERSYNTH GH0 KLÜBEROIL UH0N KLÜBERSYNTH UH 0 GLYGOYLE 0 GLYGOYLE 0 GLYGOYLE 0 OL S WE 0 OL S WE 0 SSID FLUID GL 0 TOTL RTER EP 0 NEVSTNE SL0 WINTERSHLL SRS ERSOLN 0 The drives are shipped readyfilled with gear lubricant. Lubricated in this way, the gear units are suitable for ambient temperatures in the range 0 to + 0. The quantity of lubricant is optimised for the desired installed position as is stated on the nameplate. The type of lubricant is stated in the Operating Instructions. Lubricants for other temperature ranges or special applications available on request. Wearprotective EP gear oils as indicated in the following table have proven particularly effective: Lubricant type ineral Oil Synthetic Oil USD H Oil ISO VG 0 ISO VG ISO VG 0 ISO VG 0 ISO VG 0 Disposal No. SN 0 0 SN 0 0* SN 0 0 SN 0 0 SN 0 0 SN 0 0* Lubricant anufacturer Standard oil for gearboxes in the series BF0BF0 BG0BG0 BK0BK0 Low temperature oil for gearboxes in the series BF0BF0 BG0BG0 BK0BK0 B0B0 BS0BS0 Standard oil for gearboxes in the series BS0BS BK0BK B0B0 High temperature oil for gearboxes in the series BS0BS BK0BK BF0BF0 BG0BG0 BK0BK0 B0B Standard oil for gearboxes in the series BS0BS0 BK0BK0 B0B0 High temperature oil for gearboxes BS0BS0 BK0BK0 B0B0 Food and Beverage Industry Oil for gearboxes in the series BF0BF0 BG0BG0 BK0BK0 B0B0 BS0BS0 PBGEN
9 Lubricants Lubricant quantities Important: Synthetic gear oils of a Polyglykol base (e.g. PGLP ) must be disposed of separately to mineral oil as Special Waste. So long as the ambient temperature does not fall below 0 the international definition of the viscosity class at 0 according to ISO and DIN ISO the viscosity class VG0 (SE0) is recommended according, in North merica G EP. For lower temperatures it is recommended to use oils of a lower nominal viscosity with a corresponding better starting characteristic, for instance a PGLP with a nominal viscosity VG (SE0) or G EP respectively. These types of oil can already be necessary at a temperature around the freezing point, if the break away torque of a drive is reduced by some smooth starting device or if the motor has a relatively low power The preferred quantity of lubricant for the planned type of installation is stated on the motor s rating plate (symbol oil can ). When topping up care should be taken to ensure that, depending on the fitting position, gearwheels and rolling contact bearings positioned at the top are also properly oiled. In special versions the oil level mark should be noted. Information about the quantity of lubricant required for other types of installation can be obtained from the factory PBGEN
10 Gearboxes & Lubrication Lubricants Helical Geared Lubricant otors quantities, BGseries gears Gearbox type BG0BG0 BG0 BG0 BG0 BG BG0 BG0 BG0 BG0 BG0 BG0 BG0 BG0 BG0 Lubrication quantity in l (gearhousing with flange or foot) Flange (ode./ode./ode./ode.) Foot with clearance holes (ode.) Foot with threads (ode.) [ompletely machined (ode.)] BG0BG0 (Gearbox housing) H castonfoot with clearance holes (ode.) BG B B B B V V H H H ttachment housing Lubrication quantities for BG gear series H H B Gearbox housing.0 V V PBGEN
11 Lubricants Gear (otors) dditional Dimension Sheets Lubricant quantities, BG0R Lubricant quantities, BG00R Lubrication quantity in l Gear type H H H H V V BG0R The actual gearbox design can vary from the geometry shown. PBGEN
12 Gearboxes & Lubrication Lubricants Gear (otors) dditional Dimension Sheets Lubricant quantities, BFseries gears Gear type BF0 BF BF0 BF0 BF0 BF0 BF0 BF0 BF0 Lubrication quantity in l H H Lubrication quantities for BF gear series H BF H V The actual gearbox design can vary from the geometry shown. V PBGEN
13 Gear (otors) dditional Dimension Sheets Gear box type BK0 BK0 BK0 BK0 Lubrication quantity in l BK 0. BK0 BK BK0.0 BK0.0 Lubrication quantities for BK gear series H H H H V V BK Gearboxes & Lubrication Lubricants Lubricant quantities, BKseries gears The actual gearbox design can vary from the geometry shown. PBGEN
14 Lubricants Gear (otors) dditional Dimension Sheets Lubrication quantities for BS gear series Lubricant quantities, BSseries gears Lubrication quantity in l Gear type H H H H V V BS BS BS BS BS BS The actual gearbox design can vary from the geometry shown. 0 PBGEN
15 Lubricants Gear (otors) dditional Dimension Sheets BF BG BK und BS Gear type BGZ BKZ BG0Z BK0Z BG0Z BK0Z B0Z BG0Z BK0Z B0Z BG0Z BK0Z BG0Z BK0Z BG0Z BK0Z BG0Z BK0Z BG0Z BK0Z BFZ BSZ BF0Z BS0Z BF0Z BS0Z BF0Z BS0Z BF0Z BF0Z BF0Z BF0Z BF0Z Lubrication quantity in l H H 0. 0.* 0.* H Lubricant quantities, prestage gears (Z) Lubricant quantities, prestage gears (Z) H H H H V V B/B B B B V/H V/H V *: The lubricant of the prestage for B0Z/B0Z is filled in the main gearbox. H V H H V H.0 The actual gearbox design can vary from the geometry shown. V H PBGEN
16 Gearboxes & Lubrication Threaded plugs Gear (otors) dditional Lubrication Dimension quantity Sheets for intermediate gear ounting position of main gearbox Standard position of KLK mounting position H,H,H, B,V,V for mounting with screwed resp. casted flange BGG0 BFG0 BKG0 BSG0 BG0G0 BK0G0 BG0G0 BK0G0 BF0G0 BS0G0 BF0G0 BS0G0 BG0G BF0G BK0G BS0G BG0G BF0G BK0G BG0G0 BF0G0 BK0G0 BG0G0 BF0G0 BK0G0 BG0G0 BF0G0 BK0G0 BG0G0 BK0G0 Lubrication quantity in liquid pint BF BG BK und BS BF0G0 H H B Libricant quantities, intermediate gears Definition of the terminal box position Terminal box position for intermediate gear is similar to the main gearbox that means ain gearbox BG,BF terminal box pos. I > intermediate gearbox terminal box pos. I ain gearbox BK,BS terminal box pos. II > intermediate gearbox terminal box pos. II H H H H H V V B/B B B B V/H V/H V H H V H Type designation of double gearbox combination H H H V V H V The actual gearbox design can vary from the geometry shown. V H PBGEN
17 Gear (otors) dditional Dimension Sheets D N * BG0 BG0 BG0 BG0 Type O B BG Foot housing BG Foot housing BG0 Foot housing BG0 Foot housing BG0 Foot housing BG0 Foot housing BG0 Foot housing P see osition of the oil drain and filler plugs on the system cover * Q K * = Size and Position of plug see NSYSVS Position of the oil drain an filler plugs on BGSeries Position of threaded plugs, BGseries gears J Gearboxes & Lubrication = Plug according to DIN 0 B D E F G H J K N O P Q Tab.ITab.III size B. x Tab.ITab.III size B x Tab.ITab.III size B Tab.ITab.III size B0. x Tab.ITab.III size B0 x Tab.ITab.III size B0 x Tab.ITab.III size B0 x Tab.ITab.III size B0 x. Tab.ITab.III size B0 x. Tab.ITab.III size B0 0 x. Tab.ITab.III size B0 0 x. Tab.ITab.III size B0 0 0x. Tab.ITab.III size B0 0 0x. Tab.ITab.III size B0 0 0x. Tab.ITab.III size B0 0x. Tab.ITab.III size B0 0 x. Tab.ITab.III size B x. H F Threaded plugs E G The actual gearbox design can vary from the geometry shown. * =Factor and position of the drain plug see page. PBGEN
18 Threaded plugs Position of threaded plugs, BG00R * Type D BG00R Rollerbed B * * = Size and Position of plug see NSYSVS * =Factor and position of the drain plug see page. = Plug according to DIN 0 B D G H J K see Position of the oil drain and filler plugs on the system cover Tab.ITab.III size B0. H G J K.. x The actual gearbox design can vary from the geometry shown. PBGEN
19 Gear (otors) dditional Dimension Sheets Position of the oil drain an fillerplugs on BFSeries Gearboxes & Lubrication Threaded plugs D * Type BF0 BF BF0 BF0 BF0 BF0 BF0 BF0 BF0 BF0 B see position of the oil drain and filler plugs on the system cover * = Plug according to DIN 0 B D on request Tab.I Tab.III size B. Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 * = Size and Position of plug see NSYSVS E F G H Position of threaded plugs, BFseries gears G 00. E F x x x H x. x. 0x. 0x. 0x. x. The actual * gearbox =Factor and design position can of vary the drain from plug the see geometry page. shown. PBGEN
20 Gear (otors) dditional Dimension Sheets Threaded plugs Position of the oil drain an fillerplugs on BKSeries Position of threaded plugs, BKseries gears Type BK0 BK BK0 BK0 BK0 BK0 BK0 BK0 BK0 BK0 BKBK0 BK0BK0 see position of the oil drain and filler plugs on the system cover E G on request F H D D * B * B = Plug according to DIN 0 B D E F G H Tab.I Tab.III size B. Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 Tab.I Tab.III size B.0 * = Size and Position of plug see NSYSVS * =Factor and position of the drain plug see page.. 0 *.. * 0 x x x x. x. 0x. 0x. 0x. x. The actual gearbox design can vary from the geometry shown. PBGEN
21 Gear (otors) dditional Dimension Sheets Position of the oil drain an fillerplugs on BSSeries Gearboxes & Lubrication Threaded plugs BS BS0 BS0 BS0 Type BS BS0 BS0 BS0 D D * * B B * E * H F = Plug according to DIN 0 B D E F G H see position of the Tab.ITab.III size B. 0 x oil drain and Tab.ITab.III size B.0 x filler plugs on the Tab.ITab.III size B.0 x system cover Tab.ITab.III size B.0.. x. * = Size and Position of plug see NSYSVS G Position of threaded plugs, BSseries gears The actual gearbox design can vary from the geometry shown. * =Factor and position of the drain plug see page. PBGEN
22 Gear (otors) dditional Dimension Sheets Threaded plugs Drain plug position for prestage Z Position of threaded plugs, prestage gears (Z) * G E D * B F H K J = Plug according to DIN 0 Gear BG(Z);BK(Z); BF(Z);BS(Z) BG0(Z);BK0(Z); BG0(Z);BK0(Z); BG0(Z);BK0(Z); BG0(Z);BK0(Z); BG0(Z);BK0(Z); BG0(Z);BK0(Z); BG0(Z);BK0(Z); BG0(Z);BK0(Z) see position of the oil drain and filler plugs on the system cover * = Size and Position of plug see NSYSVS * =Factor and position of the drain plug see page. The actual gearbox design can vary from the geometry shown. PBGEN
23 Threaded plugs = Plug according to DIN 0 Table I: Design with standard geared motor Gear BG(Z); BK(Z); BF(Z); BS(Z) BG0(Z); BK0(Z); BF0(Z); BS0(Z) BG0(Z); BK0(Z); BF0(Z); BS0(Z) BG0(Z); BK0(Z); BF0(Z); BS0(Z) BG0(Z); BK0(Z); BF0(Z) BG0(Z); BK0(Z); BF0(Z) BG0(Z); BK0(Z); BF0(Z); BF0(Z) BG0(Z); BK0(Z); BF0(Z); BG0(Z) Size S..0S..0 S..0S..0 S0S..0 S..0S.. S..0S.. S..0S.. S..0S.. S.. D. B B 0 Position of the drain plugs in the System over Design with Standard Geared otor.. 0 0x. D. x x x x. x. 0x. 0x. Position of the drain plugs for BG, BK, BS and BF gear ranges and prestages. PBGEN
24 Threaded plugs Position of the drain plugs in the System over Design with prestage Z D B = Plug according to DIN 0 Table III: Design with prestage Z Gear B D B. B.0.. x x B.0 B.0. x x. B.0 x. B.0 B.0 0 0x. 0x. B.0 B.0 0 0x. x. Position of the drain plugs for BG, BK, BS and BF gear ranges and prestages. 0 PBGEN
Catalogue Geared Motors IE3. Edition 03/2017. Page
atalogue Geared otors IE Edition 0/0 Gearboxes and Lubrication Standard mounting BG and BF BK and BS Position of the terminal box and the cable entry BG and BF BK and BS Radial and axial forces at the
More informationCatalogue Geared Motors Edition 505/2016
atalogue Geared otors Edition 0/0 Page Gearboxes and Lubrication Standard fitting postions BG and BF BK and BS Position of the terminal box and the cable entry BG and BF BK and BS Radial and axial forces
More informationCatalogue geared motors. Edition 01/
Catalogue geared motors Edition 0/0 Page Gearboxes and Lubrication Standard fitting - BG and BF - BK and BS Position of the terminal box and the cabel entry - BG and BF - BK and BS Radial and axial forces
More information5 Gear units, types of installation, lubricant quantities. 5.1 Standard fitting positions/ types of installation for Bauer geared motors
26 5 Gear units, types of installation, lubricant quantities 5.1 Standard fitting positions/ types of installation for Bauer geared motors 5 27 28 5.2 Position of the terminal box and the cable entry points
More informationGearboxes and Lubrication Standard fitting Position of the terminal box and the cabel entry
Geared motors for electric overhead conveyors series B Edition 0/ Gearboxes and Lubrication Standard fitting Position of the terminal box and the cabel entry Page Lubricant quantities Gear ventilation
More informationDanfoss Bauer GmbH Esslingen BA GB
Danfoss Bauer GmbH 73726 Esslingen Operating instructions Direct current permanent magnet geared motors BA 148 04 GB 1 Installation The drive must be assembled and connected by qualified personnel (skilled
More information8 Design and Operating Notes
Lubricants Design and Operating Notes.1 Lubricants General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant fill adapted for the specific gear unit and
More informationOperating Instruction BA 168 EN - Edition 11/16
Bauer Gear Motor GmbH Eberhard-Bauer-Straße 37 73734 Esslingen am Neckar Operating Instruction BA 168 EN - Edition 11/16 Translation Title Page EU Declaration of Conformity 2-3 Safety information for the
More informationOperating Instruction BA 200 EN - Edition 10/17
Bauer Gear Motor GmbH Eberhard-Bauer-Straße 37 73734 Esslingen am Neckar Operating Instruction BA 200 EN - Edition 10/17 Translation Your driving power These documents must be kept with the unit. Further
More informationKS TWINGEAR. Compact, precise and powerful.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY Compact, precise and powerful Precision combines with performance. Bevel gear technology is at the heart of an assembly consisting of gear housing, shafts, flanges
More informationOperating Instructions
Operating Instructions Table of contents Table of contents... 1 1. Declaration... 1 2. Warranty and liability... 2 3. Gear description... 2 4. Gear types... 2 5. Safety... 3 5.1 General safety information...
More information6 Lubricants. 6 Design and Operating Notes. 6.1 Lubricants. General information
Lubricants Design and Operating Notes.1 Lubricants General information Unless a special arrangement is made, SEW supplies the drives with a lubricant fill adapted for the specific gear unit and mounting
More informationExamples of Applications
Examples of Applications Optimum positioning of the tooth contact pattern is essential for a precise, low-noise bevel gear pairing. Angular milling head with ground bevel gear set by MS-Graessner. High-transmission
More informationHP High-Performance Gear Units with <2' Adjustable Backlash
Page HP High-Performance Gear Units with
More information5 Lubrication, Cooling and Heating
Overview of the and cooling types Lubrication, and Heating.1 Overview of the and cooling types The following combinations of and cooling types are possible. Lubrication Splash with shaft end pump /SEP
More information6 Design and Operating Notes
Design and Operating Notes Lubricants Design and Operating Notes. Lubricants General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant fill adapted for
More informationPOWER GEAR The high performance bevel gearbox
MS-Graessner GmbH & Co. KG THE GEAR COMPANY The high performance bevel gearbox Precision combines with performance. Bevel gear technology is at the heart of an assembly consisting of gear housing, shafts,
More informationPOWER GEAR. The high performance bevel gearbox.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY The high performance bevel gearbox Precision combines with performance. Bevel gear technology is at the heart of an assembly consisting of gear housing, shafts,
More informationOperating and Maintenance Instructions. Abteilung TB, Schell Seite 1 8 SERIES 56
Abteilung TB, Schell Seite 1 8 These instructions supersede all earlier instructions, in particular BWS 109-0 till BWS 109-3. For applications in areas with explosion hazard it is obligatory to observe
More information5 Lubricants. Lubricants Guidelines for lubricant selection. 5.1 Guidelines for lubricant selection STOP
Guidelines for lubricant selection Lubricants. Guidelines for lubricant selection Unless a special arrangement is made, SEW-EURODRIVE delivers the planetary gear unit without an oil fill and the primary
More informationCLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
More information6 Design and Operating Notes
Lubricants and fill quantities GK 0 Design and Operating Notes. Lubricants and fill quantities General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant
More information6 5 f2 L7. ØD1j6 ØD12 L21. 2 Model L-Series V-Series
L8 f3 V Series & L Series ØD6 ØD j6 ØD6 L3 L8 f3 ØD1j6 B0 C0 G0 H0 ØD j6 0 3 9 1 1 L D0 J0 ØD1j6 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio Applies to models B0,
More informationCatalogue Geared Motors
Catalogue Geared Motors Edition 0/0 Page Motors - General Duty Cycles acc. to DIN EN 00 Technical data of the 0 Hz motors Operation with frequency converter P--BGM-US 0/ Catalogue Geared Motors P--BGM-US
More information3 Mounting Positions and Important Order Information
General information on mounting positions M1 Mounting Positions and Important Order Information.1 General information on mounting positions Mounting position designation SEW differentiates between si mounting
More informationV Series. For more information, call us toll-free at 888-GAM-7117 Visit for 2-D and 3-D Drawings
V Series L3 B0 G0 ØD4 f7 ØD6 L6 L6 L8 f3 f1 2 ØD3 4 C0 H0 6 5 f2 L7 ØD2 j6 0 3 9 1 1 L4 D0 J0 ØD1j6 f4 ØD12 ØD13 f7 60 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio
More informationDas Winkelgetriebe. Made in Germany. Service. bevel gearboxes. Miniature. gearboxes. Bevel. Hygiene-design. gearboxes. gearboxes.
Made in Germany Miniature bevel gearboxes Bevel gearboxes Das Winkelgetriebe Hygiene-design gearboxes Hypoid gearboxes Worm gearboxes Gearbox motors Servo gearboxes (precision gearboxes) Special gearboxes
More informationPerformance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationAddendum to the Assembly and Operating Instructions
Drive Technology \ Drive Automation \ System Integration \ Services *2276652_1216* Addendum to the Assembly and Operating Instructions Industrial Gear Units X.. Series Helical and Bevel-Helical Gear Units
More informationOperating instructions Gear Boxes and Geared Motors ZUVERLÄSSIG ANTREIBEND EFFIZIENT
Operating instructions Gear Boxes and Geared Motors ZUVERLÄSSIG NTREIBEND EFFIZIENT Edition 05/2016 Table of contents 1. Introduction.............................................................................
More informationGearmotors and Gear Reducers
Gearmotors and Gear Reducers OPERATING INSTRUCTIONS 01 805 52 US GENERAL These operating instructions are intended to help you install and operate the drive. For trouble free service, proper installation
More informationBA EN.A0= L force Geared Motors. Ä.A0=ä. Operating Instructions GST, GFL, GKS/GKL, GKR, GSS. Gearbox
BA 12.0023 EN.A0= L force Geared Motors Ä.A0=ä Operating Instructions G GST, GFL, GKS/GKL, GKR, GSS Gearbox Product key Legend for product key Gearbox type GST GFL GKS/GKL GKR GSS Helical gearbox Shaft
More information314 ORDINARY MAINTENANCE MANUAL FOR. PGA series VERTICAL MOUNTING POSITION. Release A02/15
314 www.comerindustries.com ORDINARY MAINTENANCE MANUAL FOR PGA series VERTICAL MOUNTING POSITION Release A02/15 INDEX General information...page 3 Ordinary maintenance...page 4 Oil lubricant replacement...page
More informationWorm geared motors. Orientation 6/2 Overview 6/3 Modular system. General technical data 6/4 Permissible radial force
Siemens AG 2011 Orientation /2 Overview /3 Modular system General technical data / Permissible radial force Geared motors up to 1.1 kw / Selection and ordering data Transmission ratios and maximum torques
More informationAddendum to the Assembly and Operating Instructions
Drive Technology \ Drive Automation \ System Integration \ Services *235971_317* Addendum to the Assembly and Operating Instructions Industrial Gear Units X.. Series Helical and Bevel-Helical Gear Units
More informationINSTRUCTIONS FOR USE FACE GEARBOXES
INSTRUCTIONS FOR USE FACE GEARBOXES TNC MTC-TC KTM ES Declaration of Conformity Producer: TOS ZNOJMO, akciová společnost Družstevní 3 CZ 669 02 Znojmo Equipment: Face gearboxes Type/ Modification:MTC,
More informationCatalogue Geared Motors Edition 305/2016
Catalogue Geared Motors Edition 0/0 Page Type Designations - Significance of type designation BG-series helical-geared motor BF-series shaft-mounted geared motor BK-series bevel-geared motor BS-series
More information6 Design and Operating Notes
Reduced backlash gear units GSE Design and Operating Notes.1 Reduced backlash gear units Helical, parallel shaft helical and helical-bevel gear units with reduced backlash are available from gear unit
More informationHandbuch für installation, betrieb und wartung Planetengetriebe
Italy Headquarters Installation, use and maintenance manual Manuale Installazione Uso e Manutenzione Riduttori Epicicloidali Installation, Operation and Service Manual Handbuch für installation, betrieb
More informationPerformance Plus: Spiral Bevel Series
Performance Plus: Spiral Bevel Series GAM Perfomance Plus Miniature Spiral Bevel Gearboxes The VP Series Performance Plus Miniature Bevel Gearboxes pack high performance in a small package with the highest
More informationServo Drive Systems. Complete Program Range Standard. Catalogs. Driving Elements
Complete Program Range Standard Catalogs Driving Elements Driving Elements 1/2015 Worm Gear Units, Worm Gear Sets, Bevel Gear Units, Bevel Gear Sets, Gear Wheels, Racks, Thread Spindles and Nuts, Belt
More information5 Lubrication, Cooling, and Heating
Lubrication,, and Heating Overview of the and cooling types Lubrication,, and Heating.1 Overview of the and cooling types The following combinations of and cooling types are possible. Lubrication Splash
More informationSpindle Gear Manual. Gears and linear products since 1964
Spindle Gear Manual /// Page 2 Design of the spindle gear /// Page Mounting instructions /// Page Operating instructions and choice of oil /// Page 6 Unique gear number /// Page 7 Spare parts diagram ///
More informationOperating Instructions
BA 12.0028 450 298 EN Operating Instructions K12.0549 Typ Gearboxes 12.jjj 52.jjj Product key Gearboxes ➀ ➁ ➂ ➃ Product group Product family Gearbox size Design ➀ ➁ ➂ ➃ 12. 602. 20. 11 Geared motors ➀
More informationCertified Quality System UNI EN ISO 9001 : 2008 SERVICE MANUAL PGRF series Release A10/14
312 Certified Quality System UNI EN ISO 9001 : 2008 www.comerindustries.com SERVICE MANUAL PGRF series Release A10/14 INDEX GENERAL INFORMATION... 3 GEARBOX UNIT IDENTIFICATION... 3 RISKS AND PRECAUTIONS...
More informationBA EN.=A. Ä.=A.ä. Operating Instructions. Gearbox. Type 12. / 52.
BA 12.0028 EN.=A. Ä.=A.ä Operating Instructions Gearbox Type 12. / 52. Product key Gearboxes 1 2... Product group Product family Gearbox size Design Geared motors 1 2... Product group Product family Gearbox
More informationOperating Instructions. VLT OneGearDrive. Phone: Fax: Web: -
MAKING MODERN LIVING POSSIBLE Operating Instructions VLT OneGearDrive Contents Contents 1 Safety 3 1.1 Safety Warnings 3 1.2 Safety Information for the Operation of Geared Motors 3 1.2.1 General 3 1.2.2
More information6 Design and operating notes
Error! B ookmark not d efined.error! Boo kmark not defin ed. Error! B ookmark not d efined.error! Boo kmark not defin ed. and operating notes Lubricants and operating notes.1 Lubricants.1.1 General information
More informationINSTALLATION AND HANDLING
SHAFT / AXIS MISALIGNMENT Exact alignment of the shaft axes extends the service life of the coupling and adjacent components by minimizing reaction loads from misalignment. FIT CLEARANCE Overall shaft
More informationStainless Steel Couplings, Universal Joints & Shaft Accessories
Stainless Steel Couplings, Universal Joints & Shaft Accessories E SSFC Series - Insert (3 Jaw) Type Coupling 316 stainless steel with passivated finish Precision machined bore or solid hubs Three types
More informationKEB Gear units & Motors 2014
Introduction KEB Gear units & Motors 2014 Contents Introduction 2 designation... 2 Product description... 3 Assembly / Disassembly notes when using gear units with hollow shaft... 5 Drive selection...
More informationEN Page 1/9 EGT-TD Lubricant approvals latest version:
EN Page 1/9 Change information: Chap. /page Description (changes to the previous edition) Modification no. General 1.3 / 4 1.4 / 5 1.5 / 6 SEW lubricants added. Lubricant supplier Texaco deleted. Chapter
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More information7 Design and Operating Notes
Lubricants Design and Operating Notes.1 Lubricants General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant fill adapted for the specific gear unit and
More informationT R A N S M I S S I O N S OPERATING AND MAINTENANCE MANUAL FG GEAR UNITS UM03/2012/ENG
T R A N S M I S S I O N S UM03/20/ENG ZG KG FG SG GEAR UNITS ZG FG KG SG. INFORMATION. General information These Operating manual (OM) is part of the gear unit as supplied, and you must read them before
More informationNMRV - MCV - NRV NMRV+NMRV PC+NMRV
MAINTENANCE AND OPERATING INSTRUCTIONS FOR WORM GEAR REDUCERS AND GEARMOTORS SERIES: NMRV - MCV - NRV NMRV+NMRV PC+NMRV GB NMRV-UM-9 99/01 rev.15.07.99 2 Warehouse storage When moving the unit, care should
More informationStainless Steel Worm Gears Designed for Demanding Environments
Stainless Steel Worm Gears Designed for Demanding Environments Stainless Steel Worm Gears We are offering our own manufactured stainless steel gear series of high quality. The series is developed specifically
More informationnot just a gear unit - every component manufactured with pride to exceed ISO 9000 standards by ISO 9000 certified manufacturer.
powerdrive SMGU - the ORIGINAL and the BEST not just a gear unit - every component manufactured with pride to exceed ISO 9000 standards by ISO 9000 certified manufacturer. technidrive www.technidrive.com
More informationThe Original Domed Crown unique rounded housing prevents foreign matter adherence and fluid accumulation. Energy Efficient Design
SS2000 Series Helical Inline Gear Drives B1 Integrated o-rings Laser marked nameplate provides worry-free part identification while maintaining a smooth, unetched surface 3-Jaw Coupling NEMA or IEC C-Face
More informationGeared motors. G-motion const. G-motion const
Geared motors G-motion const G-motion const Product code Geared motors Type designation Gearbox Gearbox No. of Input Output Drive size type size stages design design G G G G G S F K K S T L S R S Helical
More informationSHAFT MOUNTED HELICAL GEAR REDUCER
Shaft Mounted Helical Gear Assembly INTRODUCTION The VIGNESSH Shaft Mounted Helical Gear Units are the result of experience in design and production, taking advantage of the most recent relevent research
More informationAccessories smart additions for efficiency and intelligent performance
smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.
More informationApproved Suppliers
EN Page 1/8 Change information: Chap. /page Description (changes to the previous edition) Modification no. Page 7 CLP HC 320 / Mobil SHC Gear 320 / highest oil bath temperature changed from 95 C to 100
More informationDOCUMENTATION - INSTALLATION _ MAINTENANCE
Bevel gears DOKUMENTATION BETRIEBS_ UND WARTUNGSANLEITUNG DOCUMENTATION - INSTALLATION _ MAINTENANCE FOR BEVEL GEARS 1 Bevel gears Radial forces Permissible radial load (stress) on input (d 1 ) and output
More informationEdition. Planetary Gear Units P..RF.., P..KF.. Series 12/2002. Operating Instructions X / EN
Planetary Gear Units P..RF.., P..KF.. Series Edition 12/2002 Operating Instructions 1055 291X / EN SEW-EURODRIVE Contents M1 M6 1 Important Notes... 4 2 Safety Notes... 5 2.1 Extended storage... 7 2.2
More informationHighest Precision: Dyna Series
Highest Precision: Dyna Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
More informationM-Version. TP & TP-High Torque. Operating Manual. TP Low-backlash planetary gear. S-Version. K-Version
M-Version TP & TP-High Torque S-Version K-Version TP Low-backlash planetary gear Operating Manual Operating Manual TP 1 Contents 1 Contents... 2 1.1 Service Contact... 2 2 General Information... 3 2.1
More informationPKF(closed design) Operating Manual. M-Version. PKF Low-backlash planetary bevel gear reducer with hollow output shaft
(closed design) M-Version Low-backlash planetary bevel gear reducer with hollow output shaft 1 Contents 1 Contents 1 1.1 Service Contact 1 2 General Information 2 2.1 Description, Designations 2 2.2 Whom
More informationSpiral Bevel Gearboxes Type BG. General. 1. Construction Features. 2. Lubrication
Spiral Bevel Gearboxes Type BG General Spiral bevel gearboxes BG incorporate the most modern advances in bevel gearbox design and construction. These gearboxes offer an extensive range of ratios together
More informationTechnical Information
CYCLO 6 5 Technical Information Technical Information Technical Information 5.1 CYCLO 6 Lubrication Cyclo are either Grease lubricated or Oil lubricated. Refer to pages 5.3 and 5.4 to determine the unit
More informationOffset shaft gearboxes 2KG12 Sizes F1... F9
Geared motors Operating instructions Edition 04.03 Offset shaft gearboxes 2KG12 Sizes F1... F9 Order N o 2KG1901-2AA00-0EA0 IdN o 214 662 44 SIEMENS AG Group Automation and Drives Division Standard Drives
More informationCHO HELICAL-HYPOID GEAR UNITS
CHO HELICAL-HYPOID GEAR UNITS Kuželočelní převodovky INTRODUCTION CHO helical hypoid gear units have been conceived to be used instead of worm gearboxes where high efficiency is requested, especially with
More informationH Synchronous Precision. T Compact Precision. S Classic Precision. Low-Backlash Servo Gearhead. V-Drive C 01/04 US Technical modifications reserved.
H Synchronous Precision T Compact Precision Low-Backlash Servo Gearhead V-Drive C 01/04 US Technical modifications reserved. S Classic Precision 7 8 10 The Best of TOP100 Germany prize is among the highest-profile
More informationPower Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox.
202 www.powerjacks.com Power Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox. Our expertise has been built on a history of engineering
More informationInstallation and Maintenance Helical and Bevel Helical Gearboxes KUMERA POWER TRANSMISSION GROUP
Installation and Maintenance Helical and Bevel Helical Gearboxes KUMERA POWER TRANSMISSION GROUP KUMERA DRIVES OY Kumerankatu 2 FI-11100 Riihimäki FINLAND Tel. +358 20 755 4200 Fax +358 20 755 4220 E-mail
More informationLUBRICATION, INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR STAINLESS STEEL CONE DRIVE SPEED REDUCERS
LUBRICATION, INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR STAINLESS STEEL CONE DRIVE SPEED REDUCERS Cone Drive double-enveloping worm gear speed reducers are used throughout industry to provide
More informationOPERATING INSTRUCTIONS. E Series Worm Gearboxes OIECE
OPERATING INSTRUCTIONS Worm Gearboxes OIECE0300-048 Contents Contents... 02 - How To Use This Manual... 04 2- Type Designation... 05 2. Detailed unit designation... 05 2.2 Nameplate unit designation...
More informationHG + New hollow shaft precision
ew hollow shaft precision The successor to our versatile hypoid gearhead with hollow shaft on one/both sides. With the, low torsional backlash and high torsional rigidity assure maximum positioning accuracy
More informationOperating Instructions
ISO 9001 ISO 9001 Gear Units OIVCE0101/0514 Operating Instructions Contents Contents... 02 1 - How to Use This Manual... 04 2 - Unit Designation... 05 2.1- Detailed Unit Designation... 05 2.2- Nameplate,
More informationKAVITSU Excellence in Gear Technology. The compact And Efficient
KAVITSU Excellence in Gear Technology The compact And Efficient OUR RANGE OF PRODUCT PLANETARY SPEED REDUCER TORQUE :- 0 Nm TO 50 00 000 Nm :- : TO 00000 : POWER :- 0.8 KW TO 000 KW MOUNTING :- FOOT, FLANGE,
More informationSeries J Shaft Mounted Gearbox
Series J Shaft Mounted Gearbox Technical Up to - 600kW / 57,000 Nm Industrial Gearbox CJ-2.00GBA1211 PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food, energy,
More informationStainless Worm & Helical bevel Gearboxes
Stainless Worm & Helical bevel Gearboxes Designed for Demanding Environments Stainless Steel Worm Gears To complement the Marlin Stainless motor range we also offer high quality, European-manufactured
More informationXCEL Series of Turbine Mixers
TABLE OF CONTENTS - TABLE OF CONTENTS Bulletin 01-050 (Recommended bolting torques)..pg.1 Bulletin 02-135 (Installation of Mixer Drive Size 15 to 19)..Pg. 2 Bulletin 04-135 (Maintenance of Mixer Drive
More informationSERIES NEW PARALLEL HELICAL AND BEVEL HELICAL GEARBOXES PARALLEL HELICAL AND BEVEL HELICAL GEARBOXES
SERIES NEW PARALLEL HELICAL AND BEVEL HELICAL GEARBOXES PARALLEL HELICAL AND BEVEL HELICAL GEARBOXES 1 2 SERIES 1 2 pag. pag. 5 Introduction Features 3 pag. pag. Versions Range and designation 5 pag. 9
More informationPOWER GEAR. The HighSpeed bevel gearbox.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY POWER GEAR The HighSpeed bevel gearbox HS www.graessner.de Nothing but highlights! Designed for special requirements no adaption, no compromises: There are decades
More informationPower Transmission. Installation and Operating Instruction for Internal Freewheels FXN. E e. Schaberweg Bad Homburg Germany
Power Transmission Installation and Operating Instruction for Internal Freewheels FXN Schaberweg 30-34 61348 Bad Homburg Germany Telephone +49 6172 275-0 Telefax +49 6172 275-275 www.ringspann.com mailbox@ringspann.com
More informationPlanetary Gearboxes. cat planetarios 200 pags 2008.in1 1 31/03/ :49:57
Planetary Gearboxes cat planetarios 200 pags 2008.in1 1 31/03/2009 10:49:57 Table of contents Description Page Symbols, units of measure and description 4-4 Technical characteristics and general information
More informationEnclosed In-Line Helical & Right Angle Helical Gear Drives
Enclosed In-Line Helical & Right Angle Helical Gear Drives P-3010-BG Doc. No. 65592 Installation and Operation 800B Series 800BR Series These instructions must be read thoroughly before installing or operating
More informationHT hypoid bevel gear boxes
HT hypoid bevel gear boxes Solid and Hollow Shaft Design Zykloidgetriebe Planetengetriebe Kegelrad-Planetengetriebe Kegelradgetriebe Hypoidgetriebe Hypoid-Stirnradgetriebe Getriebemotoren Verzahnungsentwicklung
More informationPG ALP. Low cost Planetary Gearbox. Product Manual E-V0505.doc
PG ALP Low cost Planetary Gearbox Product Manual 05-01-06-E-V0505.doc Additional Supporting Documentation UL: 03-05-03 AC M2n - Product-Manual UL: 03-06-01 NX - Product-Manual UL: 03-01-02 AC R - Product-Manual
More informationL1 (Standard Motor Length) L2 (Brake Motor Length)
HepcoMotion Geared Motor Option The optional geared motor will be the preferred choice for many applications as it provides an excellent combination of power, accuracy, flexibility and value. HepcoMotion
More informationInstallation and Operating Instruction for Basic Freewheels FBO. E e
for Basic Freewheels FBO Stand: 29.06.2011 Version : 02 gez.: Su gepr.: Ei Seitenzahl: 9 Seite: 2 Important Please read these instructions carefully before installing and operating the product. Your particular
More informationShaft Mounted Speed Reducer. Technical Catalogue
Shaft Mounted Speed Reducer Technical Catalogue Where others fit, We perform Contents The Challenge SMSR stands tall amongst the crowd. Packed full of attention to detail, the Challenge SMSR delivers performance
More informationHYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 14 / A / 103 / 0309 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 14 / A / 103 / 0309 / E Pump Drives - Gearboxes Mechanical Dry Clutches Hydraulic Clutches Pump Adaptors CONTENTS Pump Drives AM
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationClamping elements and precision joints
262 and precision joints CLAMPEX Types of clamping elements 264 Selection guide 266 Selection 267 Example of calculation/selection 268 Calculation of hubs and technical data 269 KTR 100 270 KTR 105 272
More informationYour Partner in Solutions 24/7. EMAW Worm Gearboxes. Tel: Fax: Web:
Your Partner in Solutions 24/7 EMAW Worm Gearboxes Tel: 01902 601 403 Fax: 01902 601 408 Email: sales@emag-ltd.co.uk Web: www.emag-ltd.co.uk Worm Gear Units - Installation & Lubrication To install the
More informationElectric cylinders CASM
Electric cylinders CASM 32-4-63 Contents Product description 4 Motors and gearboxes 6 Manuals 1 3D models 1 Linear unit 3 12 Linear unit 4 14 Linear unit 63 16 linear unit 18 Actuator 32 2 Actuator 4 32
More informationX.. Series Helical and Bevel-Helical Gear Units
SEW-EURODRIVE Easy Guide Industrial Gear Units X.. Series Helical and Bevel-Helical Gear Units Edition 05/2018 24803731/ EN 2/16 Gear unit structure 1 Safety notes 2 Gear unit designs 3 Mounting positions
More informationDRIVE-TECHNOLOGY INKOMA - GROUP. KG bevel shaft mounting right angle gear units
-GROUP - DRIVE-TECHNOLOGY GROUP KG bevel shaft mounting right angle gear units -GROUP Headoffice Sitz der Maschinenbau GmbH Neue Reihe 44 D - 38162 Schandelah - Germany phone: +49/(0)5306-9221-0 fax: +49/(0)5306-9221-50
More information