SECTION V SWITCHBOARD I 4 Engine/Gen Control Cubicles II 1 Synchronizing System III 1 Ground Detection Network IV 1 600V Feeder Section V 2
|
|
- Kristopher Adams
- 6 years ago
- Views:
Transcription
1 SECTION V SWITCHBOARD I 4 Engine/Gen Control Cubicles II 1 Synchronizing System III 1 Ground Detection Network IV 1 600V Feeder Section V 2 Soft Starters SECTION 2. LIQUID COOLED VFD I 3 Liquid Cooled VFD Cubicles for Mud Pumps II 1 Cooling Cubicle SECTION 3. CONTROL SYSTEM I 1 Mud Pump Console II 1 PLC System SECTION 4. POWER HOUSE I 1 Power Control House II 1 600V Motor Control Center III 1 Transformer Section SECTION 5. EMERGENCY SWITCHBOARD I 1 Emergency 600V MCC Section SECTION VAC SWITCHBOARD I 1 220V Feeder Section SECTION 7. COMMERCIAL SECTION - Commercial Section
2 The system package will operate in conjunction with the following customer-furnished equipment: Qty Description 4 CAT 3512C, 600V, 3 phase, 60Hz, 1950kVA HP Mud Pumps, each driven by one (1) 1500HP AC Motor
3 SECTION V SWITCHBOARD I. ENGINE/GEN CONTROL CUBICLES LTI POWER SYSTEMS will provide four (4) Engine/Gen Control Cubicles, each to include: AF/2000ACS/2000ARP, ABB E3 or equal, Stationary Mount Circuit Breaker with LI solid state trip unit, UV release and necessary auxiliary contacts, 85 Kaic, 600 V, 60Hz, 3 pole 2 1 Generator RUN Indicating Lamp 3 1 Circuit Breaker CLOSED Indicating Lamp 4 1 Kvar/Kw Transducer module for control and instrumentation 5 1 The Woodward EGCP-2 is a microprocessor based complete generator control and engine management package. It is designed for use with an automatic voltage regulator and speed control to automate and protect the diesel or gas engine based generator sets. The control function include: Engine Control - Engine Pre-glow Control - Fuel Solenoid Control - Engine Starter Control - Kva Controlled Cool-down Timer - Oil Pressure Monitoring - Water Temperature Monitoring - Battery Voltage Monitoring - Speed Monitoring with Overspeed Protection Synchronization - Digital signal processing to eliminate harmonic issues - Adjustable phase window, voltage window, and dwell times - Safe dead bus closing logic internal to the control - Synchronization across generator and mains breakers - Multiple shot re-closing with adjustable time delays - Manual voltage and speed adjusts for manual synchronizing Real Kw Control - +/- 3Vdc, or 500 Hz PWM speed bias output - Configurable load/unload ramp rates - Isochronous load-sharing of up to 8 units using percentage-based load sharing - Base load control for optimum fuel efficiency - Import/Export control using a watt transducer - Soft Utility Transfer Function - Externally adjustable Base Load or Process Reference levels with independent ramp rates - Kw droop provided for manual load control
4 Reactive Kvar control - PF sharing on isolated bus - Voltage Trim feature for single generator operation - Voltage Bias signal to AVR configurable for ±1, ±3, or ±9 Vdc - Power Factor or VAR control when base loaded - Externally adjustable VAR or PF setpoint levels Engine Protective Features - Over/Under Voltage - Over/Under Frequency - Reverse Power (Inverse time delay) - Reverse VARs - Overcurrent (Inverse time delay) - Speed/Frequency Mismatch - Load Surge Alarms and warnings 6 1 Basler Voltage Regulator 7 Lot Current and Potential Transformers for Operational System II. SYNCHRONIZING SYSTEM LTI POWER SYSTEMS will provide one (1) Synchronizing System to include: 1 1 Synchronizing selector switch 2 2 Synchronizing lights 3 1 Synchroscope 4 1 Synchronizing check relay 5 2 Frequency meters (Bus and Gen) 6 2 Voltmeters (Bus and Gen) III. GROUND FAULT DETECTION NETWORK LTI POWER SYSTEMS will provide one (1) Ground Detection System to include: 1 1 % AC Ground Detection Meter 2 1 LTI PC Ground Detection PC Card, calibrated 3 3 Ground Detection Indicating Lights (Clear) 4 1 Ground Test Pushbutton
5 IV. 600V FEEDER SECTION LTI POWER SYSTEMS will provide two (2) Feeder Sections to include: AF Stationary Mount Circuit Breakers for HPU No. 1 & AF Stationary Mount Circuit Breakers for Cutting No. 1 & AF Stationary Mount Circuit Breakers AF Stationary Mount Circuit Breakers for primary side of 150kVA transformers AF Stationary Mount Circuit Breakers for secondary side of 150kVA transformers AF Stationary Mount Circuit Breakers for 600V MCC section AF Interlocking Stationary Mount Circuit Breaker for Main-Tie-Main for the IT System and the Emergency MCC Section V. SOFT STARTERS LTI POWER SYSTEMS will provide the following soft starters: HP rated soft starters, 600V, 60Hz, 3 Ph SECTION 2. LIQUID COOLED VFD I. LIQUID COOLED VFD CUBICLES FOR MUD PUMPS LTI POWER SYSTEMS will provide three (3) Liquid-Cooled VFD Cubicles, each to include the following: AF Stationary Mount Circuit Breaker V:690V Input Transformers 3 1 MV Liquid Cooled Delta Rectifier Module, 6 pulse, 2100ADC continuous 4 1 DC Link Reactor 5 2 LTI MVDL643 Liquid Cooled Modules Overload capability: 40 degc Output voltage: 690VAC nominal, 60 Hz Output frequency: Hz standard 6 1 Internal protection trips or warnings: Voltage Current profile Temperature Short circuit detection Fault diagnostics and monitoring
6 Motor control and interface failures 7 1 MV Profibus interface card for Delta Controller 8 1 LTIVC Delta Controller with the following features as a minimum: a. Encoder and Encoderless Vector Control b. Speed Control 0 to 100% c. Torque Control with Full Torque at Stall d. Position Control e. Variable Current Limit Control, 0 to 100% and Current Ramp f. Automatic Thermal Limit of Heatsink Temperature g. Master Slave Operation to Load Share Multiple Motors h. Gate Suppression on Instantaneous Over Current i. Adjustable Drive Overload Protection (I x t) j. Adjustable Motor Overload Protection (I 2 x t) k. Continuous Fault Diagnostics and Watchdog Output l. History Recording m.on-line Monitoring Capability Through Laptop, with Data Storage and Retrieval n. Test Functions o. Serial Communication p. All Digital I/O Optically Isolated q. All Control Modules Interchangeable 9 1 Keypad Control and Display contains, as a minimum, the following: Drive Data Manager Motor control Keys Menu navigation and shortcut keys On-line help and diagnostics Quick set-up procedure Upload/download Parameter and status display History record Trip history 10 2 Load Sharing Reactors 11 Lot Relays, fuses, and other components necessary for operation
7 II. COOLING CUBICLE LTI POWER SYSTEMS will provide one (1) cooling system containing, at minimum, the following: 1 1 Appropriately sized Cooling System Circulation Pump and Motor w/ all Necessary Protective Devices 2 1 Appropriately Sized Radiator Type Heat Exchanger 3 Lot Alarm System including: a. Pressure Switches (High/Low) b. Temperature Switches (High/Low) c. Flow Switch d. Tank Level Switch 4 Lot Necessary wiring, hardware, and material needed for fully functional Cooling System SECTION 3. CONTROL SYSTEM I. MUD PUMP CONSOLE LTI POWER SYSTEMS will provide one (1) stainless steel, NEMA 4X Mud Pump Console containing the following: 1 1 Mud Pump Drive Available-Fault indicating light 2 3 Mud Pump Throttles 3 3 Mud Pump Assignment Switches (ON/OFF) 4 1 Purging on Indicating Light 5 1 Pressurization fault alarm indicating light 6 1 Mud Pump Alarm Accept Pushbutton 7 1 Lamp Test Pushbutton 8 1 PLC interface 9 3 Local Control Available Lights II. PLC SYSTEM LTI POWER SYSTEM will provide one (1) PLC system with the following features: 1 1 Shows system overview 2 1 Rig Control and Logic 3 1 Siemens S7 with necessary hardware and programs
8 SECTION 4. POWER HOUSE I. POWER CONTROL HOUSE LTI POWER SYSTEMS will provide one (1) Power Control House with approximate dimensions of 40 L x 10 W x 11 H. Material shall be carbon steel. Base of the house shall be constructed of channel perimeter with horizontal stringers to support a four point top lift. The power control house shall have two (2) entry/exit doors, 3 x 8, for personnel and equipment access. Door construction shall be gasketed and self closing. The door shall be of locking type with panic hardware and door closers. The door components shall be of heavy-duty construction. Vertical supports shall be of standard tubular steel and shall meet all load requirements. Exterior walls, roof and flooring shall be made of ¼ plate. Welds shall be of full penetration on exterior steel exposed to the elements. Interior welds shall be staggered. The interior walls and ceiling are made of 16-gauge galvanneal metal, primed and painted white. The flooring shall be ¼ steel plate painted ANSI 61 Gray. The flooring shall be covered with insulated matting. Plug panel will be located in recessed compartment located on one side of the house. Plugs and receptacles will be Pyle National. One (1) 42 circuit, 600Y/220Volt lighting panel will be mounted on an interior wall to provide power for lighting and other devices. Fluorescent lighting fixtures will be provided for aisle lighting. An emergency light with battery back-up will also be included in the interior of the house. The two (2) air conditioning units will be roof mount type, rated at 3 tons each. The air conditioner will be controlled by a thermostat located inside the house. The supply for the air conditioner will be a 3-phase, 600V. The power control house will be sandblasted prior to painting. The exterior of the building will be painted with a vinyl wash coat primer and a top coat of polyurethane paint. II. 600V MOTOR CONTROL CENTER LTI POWER SYSTEMS will provide six (6) sections of Motor Control Center. The MCC will be 600V, 3 Phase, 60 Hz, with NEMA rated starters and breakers. The main bus bar will be tin plated copper. Each starter will include a 600:120 control power transformer. Number of sections may change based on customer-supplied motor load list.
9 III. TRANSFORMER SECTION LTI POWER SYSTEMS will provide the following transformers to include: kVA, 600:220V, 60Hz, 3 ph, 4 W, Lighting Transformers SECTION 5. EMERGENCY 600V SWITCHBOARD I. EMERGENCY 600V MCC SECTION LTI POWER SYSTEMS will provide one (1) section of Motor Control Center. The MCC will be 600V, 3 Phase, 60 Hz, with NEMA rated starters and breakers. The main bus bar will be tin plated copper. Each starter will include a 600:120 control power transformer. SECTION V SWITCHBOARD I. 220V FEEDER SECTION LTI POWER SYSTEMS will provide 220V electrical panel to include: AT Stationary Mount Circuit Breakers for Engine Heaters AT Stationary Mount Circuit Breakers for Engine Lights AT Stationary Mount Circuit Breakers for Drill Floor Panel and Mud Log AT Stationary Mount Circuit Breakers for 220V UPS AT Stationary Mount Circuit Breakers AT Stationary Mount Circuit Breaker for Spare
Softstarters. Softstarters Type SSM Medium voltage ,800V 1
Medium voltage 2300 13,800V 1 Description Fused disconnect switch with blown fuse indicators and door safety interlocks rated for load break/fault make with automatic grounding arm Inline isolation vacuum
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION MOTORS, STARTERS & DRIVES
PART 0 DESIGN STANDARDS 0.01 GENERAL DESIGN GUIDELINES A. Coordinate starter needs for mechanical equipment prior to 50% CD and confirm again for 100% CD submittal. B. Coordinate temperature controls requirements
More informationX Q R E N T A L
POWER MODULE STANDBY 2000 kw PRIME 1825 kw 50/60 Hz FEATURES Incorporates a wide range of rugged features. Factory designed, certified prototype tested with torsional analysis. Production tested and delivered
More informationMichigan State University Construction Standards SECONDARY UNIT SUBSTATIONS PAGE
PAGE 261116-1 SECTION 261116 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationX Q I P P. POWER MODULE PRIME 1825 kw CONTINUOUS 1640 kw 60 Hz Optimized. With DEIF CONTROLLER FEATURES
POWER MODULE PRIME 1825 kw CONTINUOUS 1640 kw 60 Hz Optimized Frequency (Hz) Voltage (V) Prime kw (kva) Continuous kw (kva) 60 480/277 1825 (2281) 1640 (2050) With DEIF CONTROLLER FEATURES Incorporates
More informationXQC1600 Power Module POWER MODULE. 50/60Hz Switchable Rating FEATURES REDUCED ENVIRONMENTAL IMPACT SINGLE SOURCE SUPPLIER SOUND-ATTENUATED ENCLOSURE
IPP Rated IPP Overload POWER MODULE 50/60Hz Switchable Rating Frequency Voltage IPP Rated kw (kva) 1515 kw 1590 kw IPP Overload kw (kva) 50 Hz 400V 1515 (1893) 1590 (1987) 60 Hz 480V 1705 (2131) 1790 (2237)
More informationMedium Voltage Standby non-paralleling Control GUIDE FORM SPECIFICATION
Medium Voltage Standby non-paralleling Control 1. GENERAL GUIDE FORM SPECIFICATION A. The requirements of the contract, Division 1, and part 16 apply to work in this section. 1.01 SECTIONS INCLUDE A. Medium
More informationDiesel generator set QSK95 series engine
Specification sheet Diesel generator set QSK95 series engine 2750 kw - 3350 kw 60 Hz Data Center Continuous EPA Tier 2 emissions regulated Description Cummins commercial generator sets are fully integrated
More informationPowerCommand 3300 Control Panel. Our Energy Is Working For You.
PowerCommand 3300 Control Panel. Our Energy Is Working For You. PowerCommand Control Panel. The PowerCommand Control Panel (PCC 3300) is a microprocessor-based Drilling Power Module (DPM) monitoring, metering
More informationSECTION MOTOR CONTROL
SECTION 26 24 19 MOTOR CONTROL PART 1 - GENERAL 1.1 SECTION INCLUDES A. Manual motor starters B. Magnetic motor starters C. Combination magnetic motor starters D. Solid-state reduced voltage motor starters
More informationBAIJI OIL TRAINING INSTITUTE ISO-9001:2008 DATE :1/4/2014 LABORATORY FOR THE ELECTRICAL SYSTEMS AND CONTROL OF OIL DRILLING RIGS $
MINSTARY OF OIL REQUEST NO :ED/01 BAIJI OIL TRAINING INSTITUTE ISO-9001:2008 DATE :1/4/2014 ITEM NO. DESCRIPTION UNIT QTY PRICE $ TOTAL PRICE LABORATORY FOR THE ELECTRICAL SYSTEMS AND CONTROL OF OIL DRILLING
More informationUniversity of Houston Master Construction Specifications Insert Project Name
SECTION 26 13 13 MEDIUM VOLTAGE SWITCHGEAR PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Divisions 0 and 1 and Section 26 00 01, Electrical General
More informationB BASIC HEAT TREATMENT CONSOLE
Maritime Stress PO Box 2898, 30 Estates Road Dartmouth, NS, B2W 4Y2, Canada Toll Free: 1-877-468-1781 Phone: (902) 468-7873 Fax: (902) 468-2304 Website: E-mail: info@maritimestress.com OPERATION MANUAL
More informationSynchronous motor control. 8/15/2007 Powerflow Technologies Inc 1
Synchronous motor control 8/15/2007 Powerflow Technologies Inc 1 PLC Lubrication units Cooling Water DCS PLC Dampers SUB BD Breaker Protection relay Field Application Kiln System Fan Hydraulic Unit Instrumentation
More informationWARREN COUNTY, N.Y. M/E REFERENCE
SECTION 262000 - ELECTRIC DISTRIBUTION PART 1 - GENERAL 1.1 DESCRIPTION A. Provide a complete secondary distribution system as indicated on the Contract Documents and as specified herein. 1.2 QUALITY ASSURANCE
More informationPhoenix DX Sensorless AC Vector Drive. 3 HP to 3500 HP
Phoenix DX Sensorless AC Vector Drive 3 HP to 3500 HP Standard Features: * PRECISE CONTROL OF MOTOR SPEED AND TORQUE * BI-DIRECTIONAL FLYCATCHER (CATCH SPINNING MOTOR) * EASY TO USE, SIMPLE SETUP * POWER
More informationCENTERLINE 2500 Low Voltage Motor Control Centers and Switchgear Assemblies
Selection Checklist CENTERLINE 2500 Low Voltage Motor Control Centers and Switchgear Assemblies Use this checklist to help you configure your CENTERLINE 2500 Motor Control Center. You can type in the fields
More informationModel ESV Uninterruptible Power System 1.5 KVA/KW KVA/KW Single Phase
Model ESV Uninterruptible Power System 1.5 KVA/KW - 14.0 KVA/KW Single Phase 1.0 General General Specification This specification describes the features and design of an on-line, dual conversion, uninterruptible
More informationA. Provide variable frequency drives to operate variable torque loads as shown on the Drawings and as specified herein.
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 90 71 PART 1 GENERAL 1.01 DESCRIPTION A. Provide variable frequency drives to operate variable torque loads as shown on the Drawings
More informationROBICON W120 enclosed drive
SINAMICS Drives ROBICON W120 enclosed drive 1 HP to 200 HP Introduction This technical data sheet provides a short overview of the most important characteristics of the ROBICON W120 enclosed standard 6-pulse
More informationFortress 3 Harsh. Harsh Environment. Emergency Central Lighting Inverter (CLI) Technical Specifications
Fortress 3 Harsh Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a three phase, on-line, double conversion, solid state Lighting
More informationFortress 1 Outdoor Emergency Central Lighting Inverter (CLI) Technical Specifications
Fortress 1 Outdoor Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a single phase, on-line, double conversion, solid state
More informationSINAMICS GM150 IGCT version
/2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /14 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions
More informationPower Lynx 3 Uninterruptible Power System (UPS) Technical Specifications
Power Lynx 3 Uninterruptible Power System (UPS) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a three phase, on-line, double conversion, solid state Uninterruptible
More informationStatic frequency converter couples US paper mill s 25-Hz and 60-Hz electricity grids
Static frequency converter couples US paper mill s 2-Hz and 0-Hz electricity grids Before 0 Hz was adopted as the standard frequency for electricity distribution in the USA, power companies across the
More informationMobile Generator MMG130 Specifications
Mobile Generator MMG130 Specifications ENGINE John Deere PE4045HFG93 - turbocharged, diesel engine o Prime - 152 hp @ 1800 rpm o Standby - 166 hp @ 1800 rpm o 4 cylinder o 4.5 L displacement o Interim
More informationMagnum Mobile Generator MMG75 Specifications
Customer Driven Unsurpassed Value Magnum Mobile Generator MMG75 Specifications ENGINE John Deere PE4045TF285 - turbocharged, diesel engine o Prime - 91 hp @ 1800 rpm o Standby - 99 hp @ 1800 rpm o 4 cylinder
More informationCritical Power Switchboards. Selection and Application Guide
Selection and Application Guide Siemens RCIII (rear connected) switchboards utilizing Siemens Type SB Encased Breakers are a perfect solution for your critical power distribution needs. Whether your installation
More informationHVW701 HVAC Drive with By-Pass
s Automation Energy Transmission & Distribution Coatings HVW701 HVAC with By-Pass Designed Especially for HVAC Systems US.HVW701.By-Pass.07/2017 www.weg.net WEG HVAC-R Products WEG, a leading supplier
More informationFeatures and Benefits. Control Features
Features and Benefits AC induction motors have become increasingly dominant in industrial facilities worldwide. Manufacturers faced with increasing pressure to control costs have recognized that motor
More informationLow Voltage Automatic Transfer Switch Systems
Suitable for Emergency, Peak and Prime Power System Applications Low Voltage Automatic Transfer Switch Systems THE POWER AUTHORITY THE POWER AUTHORITY ASCO s experience and commitment to excellence in
More informationSED2. Variable Frequency Drives. with Conventional Bypass Options. Variable Frequency Drives. Description. Features F-9.
SED2 with Conventional Bypass Options Important Note: VD products are only available through authorized distribution channels. To locate an authorized distributor, please contact a Siemens Building Technologies
More informationSynchronous motor with fluid coupling drive arrangement for a preheater ID Fan. presenter Nathan Schachter CIMENTEC Engineering Ltd
Synchronous motor with fluid coupling drive arrangement for a preheater ID Fan presenter Nathan Schachter SLC PLC Lubrication units Cooling Water DCS SUB BD Breaker SR469 GE STAT-XTOR PLC Field Application
More informationA. This section includes unit capacitors for power factor correction.
PART 1: GENERAL 1.01 Wiring Devices A. This section of the standard includes design requirements for wiring connections, including receptacles and switches to equipment specified in other sections. 1.02
More informationT-Line Generator Control, Protection and Monitoring
T-Line Generator Control, Protection and Monitoring» Control. Monitor. Protect. SELCO T-Line The SELCO T-line offers a complete range of system components for generator control, protection and power monitoring.
More informationMaxPak Plus Analog DC V S Drive
Three-Phase 3-600 HP non-regenerative and 5-150 HP regenerative drives Designed to accommodate a wide range of industrial requirements, the DC V S Drive has been widely applied worldwide. Selected ratings
More informationStandby Amper VOLTAGE
INTRODUCTION Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and
More informationCobra 3 Stand-By Emergency Central Lighting Inverter (CLI) Technical Specifications
Cobra 3 Stand-By Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a stand-by, three-phase, solid state Lighting Inverter System
More informationBAC Custom Engineered Controls
BAC Custom Engineered Controls Product Detail Product Introduction......................................... K2 BAC Custom Engineered Controls Benefits....................................................
More informationMEDIUM VOLTAGE PRODUCT CAPABILITIES OVERVIEW
MEDIUM VOLTAGE PRODUCT CAPABILITIES OVERVIEW Medium Voltage Product Overview MVB SERIES, MEDIUM VOLTAGE DRAW-OUT CIRCUIT BREAKER MVB SERIES Standard Breaker Features : 1200, 2000, 3000 Amps, 3 phase, 60
More informationALTIVAR 58 AC Drives
Class 8806 / 8839 / 8998 CONTENTS Schneider Electric Brands Page ALTIVAR 58 AC Drives............................................... 3 Drives Overview...................................................
More informationAT30 SERIES BATTERY CHARGER
STANDARD FEATURES 5 YEAR WARRANTY 5 Year Product Warranty Universal main control board operates in any AT Series charger Alarm assembly with local LEDs and summary relay contact for AC Failure, DC Failure,
More informationDiesel generator set QSK60 series engine
Specification sheet Diesel generator set QSK60 series engine 1600 kw - 2000 kw 60 Hz Data Center Continuous EPA emissions Description Cummins commercial generator sets are fully integrated power generation
More informationA. This Section includes Low Voltage Switchgear Work, as indicated on the drawings, and as specified herein.
16425 SWITCHBOARD ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 26 24 13 An optional keynote to
More informationMagnum Mobile Generator MMG125 Specifications
Empowering Real People Magnum Mobile Generator MMG125 Specifications ENGINE John Deere PE6068TF275 - turbocharged, diesel engine o Prime - 150 hp @ 1800 rpm o Standby - 165 hp @ 1800 rpm o 6 cylinder o
More informationCTi Automation - Phone: Fax: Web:
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net The control & protection you expect in an innovative soft starter design... Flexibility
More informationRVS-DN Digital Reduced Voltage Motor Starter
RVS-DN Digital Reduced Voltage Motor Starter Specification Guide Specification Guide Contents 1.0 Introduction 2.0 Specifications 2.1 Standard Performance Features 2.2 Standard Protection Features 2.3
More informationDiesel generator set QSK50 series engine
Specification sheet Diesel generator set QSK50 series engine 1100 kw 1500 kw Description Cummins commercial generator sets are fully integrated power generation systems providing optimum performance, reliability
More informationKD LV Motor Protection Relay
1. Protection Features KD LV Motor Protection Relay Overload (for both cyclic and sustained overload conditions) Locked rotor by vectorial stall Running stall / jam Single phasing / Unbalance Earth leakage
More informationRVS-DX Digital Reduced Voltage Motor Starter
RVS-DX Digital Reduced Voltage Motor Starter Specification Guide Specification Guide Contents 1.0 Introduction 2.0 Specifications 2.1 Standard Performance Features 2.2 Standard Protection Features 2.3
More informationPowerCommand. GenSet Controls. Digital Paralleling Control
GenSet Controls PowerCommand Digital Paralleling Control PowerCommand Operator Panel, including graphical display and analog AC metering. Description The PowerCommand Control (PCC 3200) is a microprocessor-based
More informationParalleling Equipment
Paralleling Equipment PowerCommand Model 300 Digital Master Control Description The PowerCommand TM Digital MasterControl is a microprocessor-based paralleling system component, designed to directly interface
More information1000 kva POWER MODULE UTILITY SWITCHGEAR C32 ACERT TECHNOLOGY 50 / 60 Hz CONVERTIBLE SOUND ATTENUATED ISO 20 FT. CSC CERTIFIED
1000 kva POWER MODULE UTILITY SWITCHGEAR C32 ACERT TECHNOLOGY 50 / 60 Hz CONVERTIBLE SOUND ATTENUATED ISO 20 FT. CSC CERTIFIED (Optional equipment shown) Prime Power 400 V, 50 Hz, 1000 KVA (800 ekw) 480
More informationX Q R E N T A L
STANDBY 500 kw PRIME 455 kw POWER MODULE 60 Hz 1800 rpm 480V Image shown may not reflect actual package Frequency Voltage Standby kw (kva) Prime kw (kva) 60 Hz 480/277V 500 (625) 455 (568) 60 Hz 240/139V
More informationGenerator Fire Safety: Generator assemblies should be located outside the building.
SECTION 33 70 00 - ELECTRICAL DISTRIBUTION PACKAGED GENERATOR ASSEMBLIES Generator Fire Safety: Generator assemblies should be located outside the building. All fuel piping from the outside of the building
More informationModel NA 2 L
Model MP1500@6 2 L Frequency/Speed Voltage Prime Power Standby Power 50HZ/1500 RPM 60HZ/1800 RPM 60HZ/1800 RPM 230/400V 230/400V 277/480V 1500 KVA 1200 KW 1500 KVA 1200 KW 1650 KVA 1320 KW 1650 KVA 1320
More informationMagnum Mobile Generator MMG75 SS Specifications
Empowering Real People Magnum Mobile Generator MMG75 SS Specifications ENGINE John Deere PE4045TF285 - turbocharged, diesel engine o Prime - 91 hp @ 1800 rpm o Standby - 99 hp @ 1800 rpm o 4 cylinder o
More informationCaterpillar 1500kW XQ1500
Caterpillar 1500kW XQ1500 #4375 Diesel 480V EPA Tier 2 www.globalpwr.com Generator Features 2007 Caterpillar 1500 kw XQ1500 Diesel Generator. This XQ package features a sound attenuated enclosure, CAT
More informationRating Definitions and Conditions
Model Frequency/Speed Voltage Prime Power Standby Power MP13 S MP15@6 S 50HZ/1500 RPM 60HZ/1800 RPM 60HZ/1800 RPM 230/400V 230V/400V 277V/480V 12.5 KVA 10 KW 13.5 KVA 10.8 KW 15 KVA 12 KW 13.75 KVA 11
More informationAnnex A TECHNICAL SPECIFICATION FOR SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 400V (750KVA) DIESEL
Annex A TECHNICAL SPECIFICATION FOR SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 400V (750KVA) DIESEL 1 TECHNICAL SPECIFICATION FOR 400V, 750 kva D.G. SET 1.0 SCOPE This specification covers the
More informationDefender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications
Defender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. The Defender Mini CLI specification describes a single phase, online, solid state Lighting
More informationIlluminator Series CR NEMA 3R
Illuminator Series CR NEMA 3R GUIDE SPECIFICATIONS And TECHNICAL DESCRIPTION For 3.0, 4.0, 5.0, 6.5, 8.0kVA / kw Series CR - Single Phase Uninterruptible Power System This description contains all the
More informationWPS20/S EP Series. Features:
Features: Rotate speed governor: Mechanical governor Excitation system: self-excited SHUNT A.V.R model: R220 Emergency stop switch ATS (automatic transfer switch) receptacle 1x12V sealed for life maintenance
More informationPower (kva) 3 Phase,50 Hz, PF 0.8. STANDBY RATING (ESP) PRIME RATING (PRP) Standby Amper. kw kva kw kva 400/
General Characteristics Model Name AJD 33 Frequency (Hz) 50 Fuel Type Diesel Engine Made and Model JOHN DEERE 3029DF128 Alternator Made and Model ECP 28-VL/4 A Control Panel Model 7320 Canopy AK 20 Power
More informationLow Voltage Switchgear Type WL Low Voltage Metal-Enclosed Switchgear
13 Low Voltage Switchgear Siemens Type WL low voltage metal-enclosed switchgear is designed, constructed and tested to provide superior power distribution, power monitoring and control. At the heart of
More informationABB Softstarter Benefits Charnchanok Thongprad
ABB Softstarter Benefits Charnchanok Thongprad tomation Technology Products AB Control - 1 - - Why Softstarters? Benefits for the Electrical network Reduces voltage drops on networks Minimizes starting
More informationScope of Supply / Major Bill of Materials
Scope of / Major Bill of Materials The following table summarizes major scope of supply for this project. The tables also include a list of major parts that will be provided by customer/others. Additional
More informationMagnum Mobile Generator MMG175 Specifications
Customer Driven Unsurpassed Value Magnum Mobile Generator MMG175 Specifications ENGINE John Deere PE6068HFG94 - turbocharged, diesel engine o Prime - 217 hp @ 1800 rpm o Standby - 241 hp @ 1800 rpm o 6
More informationDiesel generator set QSK60 series engine
Specification sheet Diesel generator set QSK60 series engine 1825 kva -2250 kva Data Center Continuous emissions regulated Description Cummins commercial generator sets are fully integrated power generation
More informationMobile Generator MMG25FHI Specifications
Mobile Generator MMG25FHI Specifications ENGINE Isuzu 4LE1NYGV-03 - naturally aspirated, diesel engine o Prime - 32 hp @ 1800 rpm o Standby - 35 hp @ 1800 rpm o 4 cylinder o 2.2 L displacement o Tier IV
More informationAxpert-CSS AMTECH DRIVES Axpert-CSS Amtech
The Axpert-CSS is a range of Combination Soft Starter panels offered by AMTECH DRIVES. We also offer the module unit as an individual product, named as Axpert-Opti torque Soft Starter. This is only the
More informationC1000 Series Automatic Cap Bank
C1000 Series Automatic Cap Bank Metal Enclosed - Medium Voltage Capacitors Assemblies Fixed / Auto Medium Voltage 5, 15, 25 and 35 kv Class Customized to your specifications The Reactive Power Solution
More informationWPS60/S EP Series. Features:
Features: Rotate speed governor: Mechanical governor Excitation system: self-excited SHUNT A.V.R model: R220/R438 Emergency stop switch ATS (automatic transfer switch) receptacle 1x12V sealed for life
More informationPOWER-ZONE 4 Low Voltage Metal-Enclosed Drawout Switchgear with MASTERPACT NW Low Voltage Power Circuit Breakers
POWER-ZONE 4 Low Voltage Metal-Enclosed Drawout Switchgear with MASTERPACT NW Low Voltage Power Circuit Breakers Class 6037 CONTENTS Schneider Electric Brands Description Page Product Description..................................................
More informationPowerCommand 2100 digital generator set control
Specification sheet PowerCommand 2100 digital generator set control Description The PowerCommand 2100 control is a microprocessor-based generator set monitoring, metering and control system. The control
More informationMobile Generator MMG130 Specifications
Mobile Generator MMG130 Specifications ENGINE John Deere PE4045HFG93 - turbocharged, diesel engine o Prime - 152 hp @ 1800 rpm o Standby - 166 hp @ 1800 rpm o 4 cylinder o 4.5 L displacement o Interim
More informationA. Submit manufacturer's literature and technical data before starting work.
SECTION 16425 SWITCHBOARD PART 1 GENERAL 1.01 SUMMARY A. Related Section: 1. 16450 - Grounding. 1.02 SUBMITTALS A. Submit manufacturer's literature and technical data before starting work. B. Submit Shop
More informationRental Power QSL9 series engine
Specification sheet Rental Power QSL9 series engine 250 kva - 300 kva 50 Hz 225 kw - 275 kw 60 Hz Description This Cummins commercial generator set is a fully integrated power generation system, providing
More informationPower Break II Switchboard
Power Break II Switchboard Now available with PowerBreak II Circuit Breakers through 4000A GE s Power Break II Switchboard is now available with the new Power Break II Insulated Case Circuit Breaker (800A
More informationA. This section includes enclosed dry type transformers for lighting and power loads, with primaries and secondaries rated 600 volts and less.
PART 1: GENERAL PART I: GENERAL 1.01 Wiring Devices A. This section of the standard includes design requirements for wiring connections, including receptacles and switches to equipment specified in other
More informationNON PRESSURIZED, GALVANIZED PREP ROOM Model #ENCG C-PREP
Item :A Prep Room NON PRESSURIZED, GALVANIZED PREP ROOM Model #ENCG-200830-C-PREP Booth Working Dimensions: 20'0 Wide x 8'0 High x 30'0 Working Depth Approx. Booth Overall Dimensions: 20'4 Wide x 8'10
More informationStandby Amper VOLTAGE
INTRODUCTION Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and
More informationBurden Fuse Rating Resistor SAF / SAK6 1NM 10mm M8 12NM SAF / SAK10 2NM 16mm M8 12NM
Contents Section Page 1.0 Introduction 1 2.0 Specification 1-4 3.0 Installation 5-8 4.0 Programming 9-10 5.0 Menus 10-12 6.0 Fault Finding/Diagnostics 12-13 7.0 Communication 13 8.0 Setting Up 13-16 1.0
More informationMagnum Mobile Generator MMG235 Specifications
Customer Driven Unsurpassed Value Magnum Mobile Generator MMG235 Specifications ENGINE John Deere PE6068HF485 - turbocharged, diesel engine o Prime - 286 hp @ 1800 rpm o Standby - 315 hp @ 1800 rpm o 6
More informationSection SWITCHBOARDS. Introduction. Part 1 - General. Related Work
Section 16435 - SWITCHBOARDS Introduction Part 1 - General Related Work Section 16070 Seismic Anchorage and Restraint Section 16075 Electrical Identification Section 16080 Power Distribution Acceptance
More informationWPS150/S EP Series. Features:
Features: Rotate speed governor: Mechanical governor Excitation system: self-excited A.V.R model: R250/R438 Emergency stop switch ATS (automatic transfer switch) receptacle 1x12V sealed for life maintenance
More information825-P Modular Protection System for motors Specification Guide
Specification Guide 1.0 General 1.01 The motor protection relay shall have a current operating range of 0.5 and 5000 amperes. 1.02 The motor protection relay shall provide current measurement-based protection
More informationXQ2000 SOUND ATTENUATED POWER MODULE
XQ2000 SOUND ATTENUATED POWER MODULE 60 Hz FEATURES EMISSIONS EPA and CARB Emissions Certified for non-road mobile applications. CAT DIESEL GENERATOR SETS Factory designed, certified prototype tested with
More informationWPS100/S EP Series. Features:
Features: Rotate speed governor: Mechanical governor Excitation system: self-excited A.V.R model: R250/R438 Emergency stop switch ATS (automatic transfer switch) receptacle 1x12V sealed for life maintenance
More informationSECTION MICROPROCESSOR TRIP UNITS FOR LV CIRCUIT BREAKERS. This section is organized as indicated below. Select desired Paragraphs.
SECTION 16904 MICROPROCESSOR TRIP UNITS FOR LV CIRCUIT BREAKERS PART 2 PRODUCTS 01 MANUFACTURERS A. B. C. Eaton * * The listing of specific manufacturers above does not imply acceptance of their products
More informationMains. Great performances. Attractive coloured display. PLC functions inbuilt. Several I/O with possibility of expansion modules
Mains Powerful dual processor-based controller designed to manage production or emergency power plants composed by gensets working in parallel among them and/or with the mains. Available in two versions:
More informationModel MP150 W W
Model MP150 W MP169@6 W Frequency/Speed Voltage Prime Power Standby Power 50HZ/1500 RPM 60HZ/1800 RPM 60HZ/1800 RPM 230/400V 230/400V 277/480V 142 KVA 113.6 KW 160 KVA 128 KW 169 KVA 135.2 KW 156.2 KVA
More informationPREFACE ********************************************************** IT IS NOT INTENDED THAT THESE STANDARDS BE COPIED AND USED AS A SPECIFICATION!
PREFACE This publication has been prepared as a guide for Architectural and Engineering (A&E) firms in the preparation of documents for the design and construction of new structures and the remodeling
More informationPowerCommand. GenSet Controls
GenSet Controls PowerCommand Digital Generator Set Control with Power Transfer PowerCommand Operator Panel, including graphical display and analog AC metering. Description The PowerCommand Control (PCC
More informationThis generator set has been designed to meet ISO 8528 regulation. This generator set is manufactured in facilities certified to ISO 9001.
This generator set has been designed to meet ISO 88 regulation. This generator set is manufactured in facilities certified to ISO 900. This generator set is available with CE certification. Enclosed product
More informationCustomer Training PT 001 AFTERMARKET
Customer Training Prismic PMS POWER MANAGEMENT SYSTEMS PT 001 Course Objectives Develop your knowledge of BRUSH products in the most effective way by attending this specialist course. By the end of the
More informationCustomer Training DAX TURBOGENERATOR PT 003
Customer Training DAX TURBOGENERATOR PT 003 Course Objectives Develop your knowledge of BRUSH products in the most effective way by attending this specialist course. By the end of the course, attendees
More informationPower System Solutions (PSS)
About Power System Solutions mission The Power System Solutions Mission Statement To achieve customer satisfaction by providing innovative solutions to improve upon power quality, energy efficiency, and
More informationSECTION PANELBOARDS
SECTION 16470 PANELBOARDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. The general provisions of the contract including General and Special Conditions and General Requirements shall apply to all work under
More informationEON Model EL3 Three Phase Centralized Emergency Lighting Inverter. General Specification 40KW 55KW Systems
EON Model EL3 Three Phase Centralized Emergency Lighting Inverter General Specification 40KW 55KW Systems 1.0 GENERAL This specification defines the electrical and mechanical characteristics and requirements
More information