Fire Apparatus Order Detail:

Transcription

1 Fire Apparatus Order Detail: Quotation Number: Shop Order Number: Order Date: 6/3/6 Customer Number: E-ONE, INC 60 SW 37TH AVENUE OCALA, FL Dealer Number: E-ONE, INC 60 SW 37TH AVENUE OCALA, FL Model No: Salesperson: Sales Admin: PSTS-TYPH *** ROUSE,TANGI L Salescode TESTING COMPLIANCE STANDARD B Equipment allowance on the apparatus shall be 2000 lbs. This allowance is in addition to the weight of the hoses and ground ladders listed in the shop order as applicable The hose bed is to have the capacity for the following hose. Hose load shall be listed from driver to officer. Lay ft. of 3.00 DJ Lay ft. of 5.00 LDH Lay ft. of 3.00 DJ Estimated Weight - N/A lbs OAL. Unit has no overall length restrictions OAH RESTRICTION. The unit has an overall height restriction. The height is not to be exceeded (unloaded height). 0ft. 0in The E-ONE supplied components of the vehicle shall meet the requirements of NFPA 90, 206 edition. INSPECTIONS AND PENALTIES Final inspection trip. AXLE OPTIONS Meritor FL94 front axle 8,000 lb Front shock absorbers Meritor RS single rear axle 24,000 lb. capacity. WHEEL OPTIONS Rear axle (single) wheel trim kit. Includes stainless steel lug nut covers (chrome plated plastic if applicable) and center cap with E-ONE logo. E-ONE custom chassis w/steel wheels will have chrome plated plastic lug covers Front axle wheel trim kit. Includes stainless steel lug nut covers (chrome plated plastic if applicable) and center cap with E-ONE logo. Note: Center cap will have an inspection port IPO a logo if equipped with Stemco oil seals Alcoa aluminum wheels for rear axle (4) Alcoa aluminum wheels for front axle (2). C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page of 6 5/8/207

2 TIRE OPTIONS RWC AirGuard LED tire pressure monitoring valve stem caps (6) for single rear axle applications Four Michelin R rear tires with XDN2 mud and snow tread Two Michelin 35 tires model XZA- for front axle. SUSPENSIONS Rear suspension springs rated equal to the capacity of the axle. BRAKE SYSTEMS Dust Shields. Rear Axle. CAM Brakes only Parking brake release mounted on the driver's side lower dash Brake system air 4X2/4X ArvinMeritor 6-/2'' x 7'' S-cam brakes with cast brake drums for a single rear axle Meritor EX225H 7" disc brakes for front axle. AIR SYSTEM OPTIONS Air horns Grover recessed in bumper (PR) Air lines nylon Air dryer Bendix AD Inlet for air system. Location: driver door jamb. SECONDARY BRAKING Transmission to seek second gear when Jacobs engine brake or Telma retarder is engaged. N/A with Trans retarder Jacobs engine compression brake. BUMPER TRAYS Slatted Duradek flooring in center bumper tray Bumper tray center of bumper without slats 4 inches deep Hinged diamond plate lid for center bumper tray. Includes D-Ring latch and gas shock hold open. BUMPERS Heavy duty front bumper 0" high with full wrap around. To be painted job color " Front Bumper Gravel Shield Extension. ENGINES & TRANSMISSIONS C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 2 of 6 5/8/207

3 ENGINES & TRANSMISSIONS Eng/Trans Cummins ISL 450HP/EVS EPA compliant engine Electronic limiting of speed to 68 MPH maximum. Note: Max speed may be set at 65 MPH due to tire rating TransSynd synthetic transmission fluid for EVS Push-button transmission shift selector. EXHAUST OPTIONS Exhaust end with fresh air vent for Plymovent exhaust extraction system. FRAME ASSEMBLY Chassis frame rails, front frame extensions, rear subframe (Urban Interface), crossmembers and battery brackets shall be zinc plated (galvanized) IPOS Frame 0.25 x 3.5 x.375 chassis. FUEL SYSTEMS Fuel line hose rubber Racor fuel/water separator to be a bottom drop out style. Shall include indicator light and audible alarm Fuel shut-off valve. Location: one () each side of fuel/water separator Fuel system 65 gallons. BATTERIES Battery four group CCA. SEATS Seating capacity tag of six occupants Bostrom SecureAll mechanical air pack bottle bracket (EA) for bench / fold-down seat. Location: inboard officer's side rear wall Bostrom SecureAll mechanical air pack bottle bracket (EA) for bench / fold-down seat. Location: inboard driver's side rear wall Bostrom SecureAll mechanical air pack bottle bracket (EA). Location: rear facing officer's side Bostrom SecureAll mechanical air pack bottle bracket (EA). Location: rear facing driver's side Bostrom SecureAll mechanical air pack bottle bracket (EA). Location: officer's seat Two man bench centered on rear wall with Bostrom SCBA. Includes angled corners Rear facing Bostrom seat with SCBA officer's side Rear facing Bostrom seat with SCBA driver's side. C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 3 of 6 5/8/207

4 SEATS Salescode Officer seat to be Bostrom fixed SCBA Driver seat to be Bostrom air ride Seat cover material Durawear Seat color gray Seats, Bostrom brand. HVAC Controls for heating and air conditioning shall be located in the center dash area upper tier offset to driver side. For use with severe duty dash only Air conditioning for the Typhoon X, CII X and Quest with Cummins ISC/ISL engine and radiator mounted condenser. CAB MODEL Typhoon X medium cab with 58" CA. Includes barrier style doors. CAB DOOR OPTIONS J7 Red/Fluorescent Yellow Green Reflexite V98 striping positioned in the "A" formation located on the cab door panels Rear crew cab door windows with rear fixed panel. Includes manual roll-down actuation. For use with paddle style door latching Polished stainless steel protective trim on rear edge of cab door openings. E-ONE custom chassis only All cab exterior access doors to have 250 keyed locks Interior cab door locks - manual. Will have manual actuation from each respective door. Includes barrel style key lock on each exterior cab door (4) LED cab step area lighting. Locate each light in the cab step well area. Lights to be switched with door ajar Front cab door windows to have manual actuation All cab doors shall have exterior paddle latches Cab door panels stainless steel Driver and officer cab door windows. Include rear fixed window Rear crew cab doors in the medium position. CAB BADGE PACKAGE Cab and body to have applicable E-ONE logos. CAB ROOF TYPE Vista full height rear doors, 2". C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 4 of 6 5/8/207

5 GRILLE Salescode Stainless steel grille for Typhoon X. MIRRORS Velvac 200 mirrors with marker lights. Door mounted west coast style with remote control and heat. MISC EXTERIOR CAB OPTIONS Lower barrier cab door steps to extend approximately 3.5" from side of cab Mounting plate for battery charger receptacle, indicator and air inlet (if applicable). Plate to be removable brushed stainless steel Rear cab wall to be 3/6" aluminum diamond plate Mud flaps, front, black with E-ONE logo Pair of 36" handrails located just behind driver and officer rear door (ALS doors if equipped) one each side Pair of 8" handrails located just behind driver and officer front door one each side Windows cab side fixed officer's side Windows cab side fixed driver's side. CHASSIS OPTIONS Radiator mounted power steering cooler M58 Diesel Exhaust Fluid (DEF) 5 gallon tank for 203 / 206 EPA engines. Location: left side below rear of cab Tow eyes rear below body, painted Tow eyes front painted below bumper/cab (PR) Drivelines Thermatic fan clutch. MISC INTERIOR CAB OPTIONS Severe duty engine cover, molded polyurethane Severe duty dash package. Includes smooth plate alum center and officer side dash painted to match cab interior and lower dia plt kick panels Storage below rear bench seat. () horizontal hinged door on the front of the rear bench seat Control lanyard Y type for air horns Padded sun visors, driver and officer's side overhead Cab interior gray. Does not include engine cover or seat color. C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 5 of 6 5/8/207

6 ALTERNATOR Alternator Leece Neville 320 amp. 320 amp SAE/275 amp NFPA. CAB ELECTRICAL OPTIONS Momentary DPF regeneration override switch Dual USB charging ports in the cab wired battery hot. Location: officer side dash Dual USB charging ports in the cab wired battery hot. Location: driver side dash Battery charger E-ONE LPC volt inlet, 40 amp output LED cab headlights. TyphoonX, CIIX and QST2 only Turn signal Whelen M6 LED arrow amber pair located upper headlight bezel A3 Battery charger to be located behind driver's seat Dome Lts Red/White LED. Package includes two lights mounted in the front and two mounted in the rear of the cab. White light wired through door and light assembly switch. Red light through light assembly switch English dominant main cab gauge cluster Antenna base Tessco P/N (NMO Motorola Style - also called MATM style) on cab roof. Location: officer side forward with coaxial cable terminating at the center of the dash board Antenna base Tessco P/N (NMO Motorola Style - also called MATM style) on cab roof. Location: driver side forward with coaxial cable terminating at the center of the dash board VDC (or 24VDC) electrical outlet in the cab wired battery hot. Location: driver side dash The chassis shall be pre-wired for installation of tire chains Cab Headlights. Position: lower Switch horn button three position DOT/air horn/electronic siren Auto-Eject receptacle inlet 20 amp located outside driver's door next to handrail with a Yellow cover. COOLING PACKAGE Cooling system for use with Cyclone II X, Typhoon X, and Quest chassis. For use with 200 / 203 / 206 EPA engines. Includes coolant recovery system. BODY COMPT LEFT SIDE Stainless steel driver side body with full height 40" wide forward and 58" wide rearward enhanced extended compartmentation. Includes () 54" wide compartment over the wheel well. BODY COMPT REAR C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 6 of 6 5/8/207

7 BODY COMPT REAR Rear body panels to be upgraded from smooth aluminum plate to un-painted smooth FRP Lower rear stainless steel tall compartment B, 46" wide x 45" high x 26" deep. Includes bolt-on intermediate step above. Entire rear panel to be smooth aluminum plate for Chevron graphics Bolt-on diamond plate 20" tailboard between rear side compartments with Bustin Tread. Includes hand rails (2) vertically on trailing edge of body and horizontally mounted hand rail below hose bed. BODY COMPT RIGHT SIDE Stainless steel officer side body with full height 40" wide forward and 58" wide rearward enhanced extended compartmentation. Includes () 54" wide compartment over the wheel well. PUMP MODULE Upper SM stainless steel pump module with single stacked triple crosslays and top open storage with treadplate flooring Stainless steel 50" wide lower pump module. Includes side running boards with Bustin Tread inserts. PUMP PANELS Driver and officer side mounted pump panels are to be brushed stainless steel The stainless steel double gauge panels on the driver side of the side mount pump module are to be hinged downward. Includes two (2) cable hold opens and latches, per door. Required with 6" master gauges and/or overcrowded single lower gauge panels. PUMP MODULE OPTIONS E-ONE logo mounted one each side on pump module/preconnect panels. Logos to be sized as applicable to available space on panels Air horn switch at pump panel. Switch to be labeled ''Evacuation Alert''. Location: driver side pump panel. DOORS Door roll up tall (greater than 45") with satin finish ROM. Location(s): B Door roll up tall (greater than 45") with satin finish ROM. Location(s): R Door roll up tall (greater than 45") with satin finish ROM. Location(s): R Door roll up tall (greater than 45") with satin finish ROM. Location(s): L Door roll up tall (greater than 45") with satin finish ROM. Location(s): L Door roll up short (up to 45") with satin finish ROM. Location(s): R2. C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 7 of 6 5/8/207

8 DOORS Salescode Door roll up short (up to 45") with satin finish ROM. Location(s): L2. COVERS Vinyl access cover for fill tower(s) Vinyl Red hose bed cover with side bungee cords and attached rear flap(s) Vinyl Red crosslay cover with attached side flaps. SCBA BOTTLE STORAGE Strap(s), loop style to retain SCBA bottle(s). Locate one per bottle in each exterior storage compartment SCBA bottle storage. (3) Fire Shopp style SCBA bottle storage with hinged brushed stainless steel doors with push-button latches. (2) officer side and () driver side in the rear wheel well area. HANDRAILS / STEPS Innovative Controls dual lighted LED folding step. Location: officer side front compartment face. Each location requires a minimum of () handrail per NFPA Innovative Controls dual lighted LED folding steps rear NFPA. Includes folding steps on officer side (staggered stepped as applicable with tailboard depth) for additional hosebed access and handrail mounted on officer side upper hosebed side (as applicable) Innovative Controls dual lighted LED folding steps rear NFPA. Includes folding steps on driver side (staggered stepped as applicable with tailboard depth) for NFPA hosebed access and handrail mounted on driver side upper hosebed side (as applicable). MISC BODY OPTIONS Stainless steel rear fender panels painted job color. (Recommended for FRP paint process compatibility!) Includes bolt-on stainless steel inner wheel well liners (not painted) and polished stainless steel outer fenderettes Brushed stainless steel rubrails for the sides of the body below the lower side compartments Body main frame and hose bed side assemblies for an 83" high pumper body The rear of each hose bed divider to have a hand hold cut-out(s) Mud flaps, rear, black with E-ONE logo Divider Long. To run full length of hose bed (front to rear) Cast Products recessed fuel fill with door. LADDER STORAGE / RACKS C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 8 of 6 5/8/207

9 LADDER STORAGE / RACKS Officer side vertical storage tunnel behind reduced upper depth right side compartments. Tunnel to hold: 24' 2-section and 4' roof, plus (2) pike poles and a folding ladder. Includes vertically hinged rear smooth plate door with bent D-ring latch C57 The length of ladders capable of being stored shall be the following: 24' 2-section and 4' roof ladder Brand of ladders capable of being carried on unit to be Alco-Lite Hard Suction Storage Rack. Officer side compartment top. Includes spring hold downs and scuff plates behind spring mounts (as applicable) Hard Suction Storage Rack. Driver side compartment top. Includes spring hold downs and scuff plates behind spring mounts (as applicable). SHELVES Tracks for adjustable shelf in shallow compartments up to 5.99" deep. Location: L3 upper Adjustable shelf (C-Style) for non-transverse compartments up to 5.99" in depth. Location: L3 upper Permanent shelf. Locate in R3 at offset (above extrusion if applicable) Permanent shelf. Locate in R at offset (above extrusion if applicable) Permanent shelf. Locate in L3 at offset (above extrusion if applicable) Permanent shelf. Locate in L at offset (above extrusion if applicable). TRAYS / TOOLBOARDS Tray, floor mounted roll-out with gas spring. 500 lbs. capacity. Location: B. PUMPS Hale QMAX GPM single stage pump. Requires primer option Rating 500 GPM. WATER TANK Gallon "T" Water Tank. UPF Poly III color fill towers. Note: Any foam cell(s) and/or storage options through the tank will reduce the overall water capacity Fill tower(s) to be located offset to officer side of water tank. PUMP OPTIONS Trident primer W/3 barrel push button control. For use with 250 GPM and larger pumps. Requires 5.6 CFM or large engine air compressor Pump cooler with Innovative Control /4 turn valve with "T" handle and label. C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 9 of 6 5/8/207

10 PUMP OPTIONS Manual operated master pump drain. The master drain shall be clearly marked and placed in accessible location on pump panel Steamers to be Flush + ". Location: officer's side Steamers to be Flush + ". Location: driver's side Mechanical pump seal - Hale Pump shift override, side panel mounted Zinc anodes for Hale pump (PR), () discharge side and () intake side Mechanical speed counter for Hale pumps. DISCHARGES AND PRECONNECTS L65 Deck gun piping to be positioned centered in deck gun channel Polished Stainless Steel Swivel Located on Top of Bumper officer's side outboard for Front Bumper Discharge " Crosslay Akron Manual Valve. Location: crosslay " Deck Gun Discharge, Akron manual valve " Right Pump Panel Discharge Akron Manual Valve (Waterous pumps noted location to be forward lower port). Location: right side discharge " Left Rear Discharge Akron Manual Valve. Location: left rear discharge " Right Pump Panel Discharge Akron Manual Valve. Location: right side discharge " Left Pump Panel Discharge Akron Manual Valve. Location: left side discharge " Left Pump Panel Discharge Akron Manual Valve. Location: left side discharge " Crosslay with Akron manual valve. Location: crosslay & " front bumper discharge Akron manual valve. DISCHARGE OPTIONS Innovative Controls discharge and intake bezels with integral color code and verbiage for side mount pump panel Innovative Controls 3/4" bleeder/drain valve include lift lever with ergonomic grip Innovative Controls push/pull valve controls with locking T handles Deck gun TFT 8" Extend-A-Gun, 3" manual operation. GAUGES " Innovative Controls stainless steel case master pressure gauges with bezel. Intake , and discharge C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 0 of 6 5/8/207

11 GAUGES Salescode " Innovative Controls stainless steel case pressure gauge (0-400) with color code bezel Innovative Controls 0 LED SL series water tank level gauge. On pump panel. INTAKES " Left Intake Akron Manual Valve. INTAKE OPTIONS Intake relief valve, Akron. TANK PLUMBING " tank to pump Akron manual valve w/4" tank connection " tank fill Akron manual valve. MISC PUMP PANEL OPTIONS All tags installed on the exterior of the apparatus shall be mechanically fastened with stainless steel screws. These include but not limited to tags installed on the pump module, body, cab and bumper. Pump panel tags shall be mechanically fastened regardless whether the panel is enclosed behind a door Pump panel tags color coded per NFPA compliance. PRESSURE GOVERNORS FRC PumpBoss pressure governor PBA400. Includes engine monitor gauges. PUMP CERTIFICATION Pump certification GPM ELECTRICAL SYSTEMS GPS Module for V-MUX electrical system (Weldon). Includes antenna. Requires Vista display with touch screen Vista IV touch screen display for V-MUX electrical system. Location: driver's side engine cover Vehicle data recorder / 206 NFPA compliant. Includes occupant detection shown in multiplex display. E-ONE chassis only V-MUX Electrical system for pumper / tanker / rescue Modem for use with the E-ONE multiplex electrical system. CONTROLS / SWITCHES C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page of 6 5/8/207

12 CONTROLS / SWITCHES Switch additional 2 volt/5 amp toggle. Location and function: Under driver side cab dash for master battery override D46 Switch circuit three way. Includes () additional switch. An additional switch required for more than two locations. Location: officer's side switch panel for cab scene lights C Switch circuit three way. Includes () additional switch. An additional switch required for more than two locations. Location: driver side pump panel for driver side LED flood lights, officer side pump panel for officer side LED flood lights. 2 MISC ELECTRICAL volt 2 gauge constant hot lead (24" long) with ground wire. Location: L3 upper forward wall Back-up alarm 97 db V power distribution module. Includes (6) battery hot and (6) switched hot circuits. 00 amps max (IATS). Location: behind officer's seat. DOT LIGHTING LED marker light cab and body package. E-ONE custom cab and SS body vehicles Whelen M6 series LED vertical mount tail lights. Includes LED stop/tail, arrow turn and back-up lights with vertical 4 light housing and weatherproof connectors Weldon auxiliary turn signal model LED (PR). Location: () each side in body wheel well offset forward License plate light LED with chrome housing located at the rear of the body. LIGHT BARS Light bar Whelen Freedom IV Model F4X7 72" with 4 LED modules. Location: Centered on the front cab roof V Light bar LED color: Red/White with clear lenses Whelen MKEZ7.5" standard mount for front light bar (PR) GTT 795H Opticom centered in forward facing Whelen Freedom IV light bar. LIGHTS - COMPARTMENT, STEP & GROUND Ground light package EON LED - large Compartment light package Amdor Luma-Bar LED for medium bodies. Includes one light per compartment (two if transverse). LIGHTS - DECK AND SCENE Hose bed light Whelen PFBP2C LED. Locate center front of hose bed. Switched with work light switch in cab. C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 2 of 6 5/8/207

13 LIGHTS - DECK AND SCENE Crosslay light Whelen PFBP2C LED. Locate to rear of crosslay (SM) and forward of crosslay (TM as applicable). Switched with work light switch in cab Whelen M6 Linear Super LED scene lights (PR). Switched in cab (lights mtd on the sides of apparatus to be switched separately). Locate () each side of cab, rearward of forward doors, up high Whelen M6 Linear Super LED scene lights (PR). Switched in cab (lights mtd on the sides of apparatus to be switched separately). Locate () each side rear compartment face up high Cab scene lights are to be switched with cab doors in addition to standard Deck/scene light circuit wiring through chassis reverse. Requires rear deck or scene light. LIGHTS - NON-WARNING Weldon pump panel LED light package with (3) lights per side pump panel. Pump panels over 45" may require additional lights. Side mount only LED pump compartment light (EA) Engine compartment light, LED (EA). LIGHTS - QUARTZ Light Whelen Pioneer model PFP2 2V with external bottom raise pole mount. Includes switch accessible to driver. Location(s): driver side back of cab Light Whelen Pioneer model PFP2 2V with external bottom raise pole mount. Includes switch accessible to driver. Location(s): officer side back of cab Light Whelen Pioneer Plus model PFP2 2V with brow mount (EA). Includes switch in cab accessible to driver (driver and officer side facing lights switched separately). Location(s): driver and officer side front cab brow. 2 SIRENS The electronic siren control is to be located on the center overhead console offset to officer side Prewire for Federal Q2B mechanincal siren. Driver side front bumper Federal PA300 electronic siren recessed mounted. SPEAKERS Speaker, Federal Signal Dynamax ES00 with "E-ONE" grille through bumper. Location: driver side front bumper. WARNING LIGHT PACKAGES C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 3 of 6 5/8/207

14 WARNING LIGHT PACKAGES Whelen M6 Super LED lower level warning light package. Includes (8) red M6R LED light heads and (2) red TIR3 LED light heads. Locate side facing lights: at forward most position, centered in rear wheel well, and side facing at rear of body in rubrail if equipped. WARNING LIGHTS Warning light Whelen M6R series Linear Super LED (PR) red. Location: () each side above tail lights Warning light Whelen M6R series Linear Super LED (PR) red. Location: () each side of cab down low just ahead of rear doors Warning light Whelen M6R series Linear Super LED (PR) red. Location: () each side above quad bezel (outboard) Hazard (door ajar) light 2" LED. Location: center overhead C5-0 Whelen beacon with LED upper beacon and 700 series Super LED (PR) model B6LED with red domes and driver blue, officer red LEDs. Location: () each side of body on rearward compartment top. GROUND LADDERS Alco-Lite FL-0, 0' folding ladder w/safety shoes Alco-Lite PEL-24' 2-section extension ladder Alco-Lite PRL-4' roof ladder. MISC LOOSE EQUIPMENT DOT Required Drive Away Kit - Kit includes three (3) triangular warning reflectors with carrying case. This kit is for the end user and is to remain with the truck. EXTERIOR PAINT FRP painted exterior panels IPO standard paint process for stainless steel bodies. Available only on stainless steel pumper bodies that have roll-up doors. Provides a credit versus the standard painting process. Sikkens paint. Color: FLNA3225E- Red Paint cab Sikkens two-tone. Upper area of cab to be painted FLNA4006 White Paint E-ONE chassis cab - Sikkens paint. Color: FLNA3225E- Red All applicable pump/pre-connect application modules are to have a sanded finish (not painted job color). Includes upper and lower pump modules, crosswalk module and/or speedlay/pre-connect module (as applicable). Rear mounted body/pump module to be painted job color Undercoating E-ONE. C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 4 of 6 5/8/207

15 EXTERIOR PAINT Cab paint break - standard with dip to grille. Break is 3.5" inches below the drip rail on Typhoon X and CII X cabs. Pre-07' emission Typhoon cab break is 33.5" below the drip rail. INTERIOR PAINT The interior of the cab to be painted Zolatone gray. LETTERING Demo graphics package - Pumper. Includes special E-ONE black reflective Maltese cross on front cab doors ("ENGINE" in center, E-ONE logo on upper leg, "" on lower leg - algerian D font); "FIRE" over "RESCUE" in 6" white reflective lettering with black outline / shade (Algerian D font) on rear cab doors; " in reflective lettering (Helvetica reverse R font - size to fit) low on rear sides of body (black if on satin roll-up door, white if on painted surface). STRIPING Yellow line to indicate designated standing / walking areas above 48" high in compliance with 206 NFPA 90. Line to be " wide. Steps, ladders and areas with a railing or structure at least 2" high are excluded from requiring the line J7 Chevron "A" style 6" Reflexite V98 striping full width on rear of body. Includes rear facing extrusions, panels and doors. Colors to be Red/Fluorescent Yellow Green Paint break Scotchlite chassis stripe - 3/4" Wide - Black. To be located at existing paint break Scotchlite stripe " located.5" above and below existing stripe. Color: Gold Striping Instructions: Z on front compartment door /4" Pin stripe above and below existing Scotchlite stripe. Color: White NFPA Scotchlite Stripe - 6" wide with "Z". Stripe straight on front, sides and rear of cab and body. "Z" location to be specified by customer. Color: Black. Location: top of stripe flush with top of bumper and straight back. WARRANTY / STANDARD & EXTENDED Year / 00,000 Mile Structural Warranty for Stainless Steel Body - Statement of Warranty Year Frame Corrosion Warranty. Includes Rails, Liners (if equipped), Crossmembers, Front Frame Extensions and Battery Tray Brackets Year Limited Paint and Perforation Warranty - For Sikkens Paint Year Stainless Steel Plumbing Warranty - Statement of Warranty. C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 5 of 6 5/8/207

16 WARRANTY / STANDARD & EXTENDED Year/00,000 Mile Structural Warranty for Alum Cab / Body - Statement of Warranty Lifetime Frame Warranty Standard Year Warranty. SUPPORT, DELIVERY, INSPECTIONS AND MANUALS Fire Apparatus Safety Guide published by FAMA, latest edition Approval Drawings-Standard Manuals, Operator and Service CD-ROM. C:\WINDOWS\TEMP\ORDNOPRICENOYCODES {F769473F-9DB5-40C BA2DED8}.rpt Page 6 of 6 5/8/207