KSA/KSB ACCESSORIES ELECTRICAL ACCESSORIES MECHANICAL ACCESSORIES

Transcription

1 KSA/KSB ACCESSORIES ELECTRICAL ACCESSORIES Plunger Style Door Switch (Suitable for all pilot duty control or unit control based on number of motors and voltage: KSA: 120V or KSB: 120V or V) Roller Arm Door Switch (Suitable for all pilot duty control or unit control based on number of motors and voltage: KSA: 120V or KSB: 120V or V) Remote Hand/Off/Auto Selector Switch (Single phase only) 1½ 120V, V Toggle Disconnect Remote Mounted 30 amp V, Single Phase (2 hp max.) Toggle Disconnect Unit Mounted 30 amp V, Single Phase (2 hp max.) Thermostat 2-Pole 9505T C C-BI 9502DS2T-P Remote Mounted 9502DS2T-P-BI Unit Mounted Locking Cover For Thermostat 95022E999 MECHANICAL ACCESSORIES Correctional Tamper Proof Package Wall Support Bracket Two Required Per Unit Add Suffix -TP to MODEL# Example: KSA2072AA-TP VS-000WMB VS-000WMB Extension Bracket (Not Available for Electric Heated Units or Units with a factory mounted motor control) 12 Extension Bracket (Not Available for Electric Heated Units or Units with a factory mounted motor control) Floor Mounting Bracket (Two Piece) Tandem Mounted Bracket Maximum Joined Length-Vertical 30 66VS-006EB 66VS-012EB 66VS-000FMB 66VS-000TMB 1

2 KSA/KSB ACCESSORIES 1/2 ALUMINUM & POLYWASHABLE FILTERS FOR UNHEATED, ELECTRIC, STEAM & HOT WATER HEATED UNITS FILTER LENGTH CONTROL STATIONS SINGLE PHASE CONTROL STATIONS - UNHEATED MODELS ONLY Note:1. Single phase control stations listed below are required when: The motor quantities exceed the following: KSA: 120V or V; KSB: 120V or V UNHEATED MODELS ONLY 2. If the motor quantities at voltage do not exceed the requirements as stated in #1 (above), a control station is not required and only a plunger or roller style door switch needs to be quoted. SINGLE PHASE CONTROL STATION COMPONENTS - Line Voltage Control Factory mounted/wired NEMA & 12 rated industrial enclosure (standard right hand end plate, left hand optional), motor contactor, fusing (when required) & terminal strip. Single Phase Control Station - Factory Mounted Right End UNHEATED # of MOTORS VOLTAGE hp. PART # ALUMINUM FILTER 9012CS0A3P120 POLYWASHABLE FILTER 36 80VS-036C-A 80VS-036C 2 80VS-02C-A 80VS-02C 8 80VS-08C-A 80VS-08C 60 80VS-060C-A 80VS-060C 72 80VS-072C-A 80VS-072C 78 80VS-078C-A 80VS-078C 8 80VS-08C-A 80VS-08C 96 80VS-096C-A 80VS-096C VS-108C-A 80VS-108C VS-120C-A 80VS-120C VS-132C-A 80VS-132C 1 80VS-1C-A 80VS-1C Note: Polywashable filter cannnot be used on UL certified unheated and electric units *FILTER REPLACES PERFORATED INTAKE GRILLE Consult factory for cost of filter with perforated intake grille 120 KSA 1/2 9012CFDA1A1F CFDA1B1F CFDA1J1F CS0A3P CS0A3P KSB CFDA1A CFDA1B CFDA1J001 2

3 OPTIONAL SINGLE PHASE CONTROL STATION ACCESSORIES All optional accessories will be factory mounted/wired inside the control station KSA/KSB UNHEATED MODELS ONLY CONTROL STATIONS CONTROL STATION ACCESSORIES Time Delay-Line Voltage Control (120/208/20/1) Add -TD to part # Time Delay- 2 Volt Control (includes time delay and transformer) Add -2-TD to part # 2 Volt Control Add -2 to part # ELECTRICALLY HEATED MODELS ONLY CONTROL PACKAGES BASIC CONTROL PACKAGE Recommended for openings where the door stays open or does not have a lot of traffic. Includes: Door Switch Plunger Style, Roller Style, or Magnetic Reed Style 2 VOLT CONTROL PACKAGE Basic Plunger Basic Roller Basic Magnetic 9503MRS1F2-NC-K NOTE: If there are multiple manual doors on the opening, an additional switch is required. Includes: Door Switch Plunger Style, Roller Style, Magnetic Reed Style Factory Installed Time Delay Relay DELUXE CONTROL PACKAGE Recommended for high traffic openings. 2 VOLT CONTROL PACKAGE Deluxe Plunger 2 V Deluxe Roller 2 V Deluxe Magnetic Reed 2 V 91VSA120-DE-P 91VSA120-DE-R 91VSA120-DE-M NOTE: If there are multiple manual doors on the opening, an additional switch is required. 3

4 Control Panel Required for all motors operating on three phase power NOT NEEDED FOR ELECTRICALLY HEATED MODELS Standard Features NEMA /12 Enclosure Motor Contactor Motor Overload (one per motor) 120V Control Transformer Terminal Strip Optional NEMA X Enclosure Features Poly Fiberglass Aluminum Stainless Steel Optional Feature 2V control Transformer NOTE: A switch (door switch, manual start/stop, etc.) must be ordered with the panel for activation of the unit(s) V 80V REMOTE or FACTORY MOUNTED REMOTE or FACTORY MOUNTED 1/2 or 1 hp 1/2 or 1 hp 1/2 or 1 hp 1/2 or 1 hp 1/2 or 1 hp 1/2 or 1 1/2 or 1 or 1 hp CONTROL PANEL PART NUMBER CONFIGURATION 903BA1HAF001-FD Phase 3= Three # of Motors A = 1 B = 2 C = 3 D = Heat Code A = Unheated Speed 1 = Single Speed Voltage Code D = 208/3/60 E = 20/3/60 H = 80/3/60 T - 380/3/50 Model AF = KSA/KSB HP 1/2 = 1F2 1 = 001 Disconnect FD=Fused ND=Nonfused Optional

5 For: Unheated & Electrically Heated Models Control Panel Accessories Hand/Off/Automatic Switch Start/Stop Push Button Station Non-Fused Disconnect Switch CONTROL PANEL ACCESSORIES - BUILT-IN 9505HOAB-CP 950SSPB-CP 3Ø V; 20 80V; 0 amps Add -ND to part # 3Ø V; 25 80V; 60 amps Add -ND to part # 3Ø V; 25 20V; amps Add -ND to part # 3Ø V; 0 20V; 75 80V; amps Add -ND to part # 3Ø V; 60 20V; V; amps Fused Disconnect Switch Add -ND to part # 3Ø V; 15 80V; 30 amps Add -FD to part # 3Ø V; 35 80V; 60 amps Add -FD to part # 3Ø V; 30 20V; amps Add -FD to part # 3Ø V; 0 20V; 75 80V; amps Add -FD to part # 3Ø V; 60 20V; V; amps Add -FD to part # Time Delay Relay (120V or 2V) 9009KOL312-C CONTROL PANEL ACCESSORIES - REMOTE MOUNTED Hand/Off/Automatic Switch 9505HOAR Start/Stop Push Button Station 950SSPBR Plunger Style Door Switch Roller Arm Door Switch Thermostat 2-Pole 9502DS2T-P Locking Cover For Thermostat 95022E999 5