Food, Dairy and Pharmaceutical

Size: px

Start display at page:

Download "Food, Dairy and Pharmaceutical"

Rosamund Morris
6 years ago
Views:

1 CP Sanitary Fitting Reference Data Sheet he CP (clean in place) sanitary connections illustrated on this page are the most commonly used fittings in food, dairy, beverage, pharmaceutical, and chemical processes where contamination and cleanliness is of concern. Fittings other than those illustrated are available upon request. he illustrations are provided for reference purposes to aid in the selection of the correct fi tting style for new or replacement sensor assemblies. Most CP sensor assemblies manufactured by Pyromation are constructed in accordance to the -A Sanitary Council Standard for instrument fi ttings and connections. BEVEL SEA FNG [1] R-CLAMP FNG Cap Style 16A - Order Code 1 without Nut Cap Style 16A - Order Code 2 with 1-H Nut Cap Style 16AMP - Order Code 5 PV GASKE YPE A4 ADAP OR [1] Cap Style 16APV - Order Code without Nut Cap Style 16APV - Order Code 4 with 1-H Nut Cap Style A4 Adaptor - Order Code 6 "" CLAMP FNG [2] Cap Style 16A-14 - Order Code 7 See back section for cap dimension. [1] Must be manually cleaned. [2] Not A authorized. Copyright 2005 Pyromation, nc., All Rights Reserved Phone (260) FAX (260) or (800) FD-1

2 CP Sanitary Connected RDs General purpose CP sanitary connected RD temperature sensors are used in food, dairy, beverage, pharmaceutical, and chemical processing applications where sensor corrosion and product contamination are critical factors. he sanitary caps listed are those most commonly used in such processes. Sanitary caps are welded to the sheath and to a heavier support tube, all of stainless steel, and then ground and polished to a finish that exceeds No. 4 minimum fi nish required by the -A Sanitary Standard ypical surface roughness average measurement is 15 μin R a or better. he process contact surfaces are free of pits, crevices, and pockets thus preventing corrosion and bacteria growth. he three wire constructed sensor assembly consists of a high-accuracy platinum element sealed inside a 16 stainless steel sheath and is provided with a FDA compliant white thermoplastic gasketed connecting head. he complete assembly provides excellent washdown protection. t is recommended that once customer connections are made, the connecting terminals be further protected by applying a coating of moisture-proof sealant over the connections. X Example Order Number: YPE 16 SS, 1/4 OD OD 16 SS SUPPOR UBE 04 SANLESS SEEL Maximum temperature limit: 204 ºC [400 ºF] ORDER S R5185L CP , 1-1 Pt100 (α = ºC -1 ) RD Assemblies NAL ELEMEN 0 o C RAF185L48 ± 0.06 R1185L48 ± 0.1 R185L48 ± 0.0 R5185L48 ± 0.01 RAF285L48 ± 0.06 R1285L48 ± 0.1 R285L48 ± 0.0 R5285L48 ± 0.01 hermocouple Assemblies For CP thermocouple assemblies use /C types J, K,, or E and options G for grounded junction or U for ungrounded junction as per example. EXAMPLE: P48G-04 - CP Specify "X" length in inches using 2 digits, plus any fractional length desired Examples: 04 = 4", 05(1/2) = Sanitary Cap Size UBE OD (inches) UBE OD (inches) 1 1(1/2) 4 2 (1/2) 6 A4 adapter only 4 erminations 91 16L stainless steel head 6 White polypropylene head 62 White polypropylene head, DN form B 1,W expoxy coating 22 (06) 6 individual efl on leads with terminal pins 02 C 1/2 OD, 2 1/4 long extension leadwire transition (requires table 5 & 6 selections from RD section) Head mounted transmitter Ceramic erminal Block Sanitary Cap Style 2 16A cap - Bevel Seat with1-h Nut [1] 5 16 AMP cap - ri-clamp 6 A4 adaptor [1] [1] Must be manually cleaned [2] Not A authorized Copyright 2005 Pyromation, nc., All Rights Reserved Phone (260) FAX (260) or (800) FD-4

3 CP Sanitary Reduced ip RDs General purpose reduced tip CP sanitary connected RD temperature sensors are used in food, dairy, beverage, pharmaceutical, and chemical processing applications where sensor corrosion and product contamination are critical factors. he reduced tip construction provides strength along the major sheath length, and faster temperature response times at the reduced tip. he reduced tip sizes listed below are the most common constructions. For other configurations please consult the factory. he sanitary caps listed are those most commonly used in such processes. he sanitary caps are welded to the sheath and to a heavier support tube, all of stainless steel, and then ground and polished to a finish that exceeds No. 4 minimum finish required by the -A Sanitary Standard ypical surface roughness average measurement is 15 μin R a or better. he process contact surfaces are free of pits, crevices, and pockets thus preventing corrosion and bacteria growth. he three wire constructed sensor assembly consists of a high-accuracy platinum element sealed inside a 16 stainless steel sheath and is provided with a FDA compliant white thermoplastic gasketed connecting head. he complete assembly provides excellent washdown protection. t is recommended that once customer connections are made, the connecting terminals be further protected by applying a coating of moisture-proof sealant over the connections. Sealant products are listed later in this section OD 16 SS SUPPOR UBE ORDER S " X Maximum temperature limit: 204 C [400 F] 1 1/4 YPE 16 SS, /8 or 1/2 OD 04 SANLESS SEEL Example Order Number: R5185L68R CP , 1-1 Pt100 (α = ºC -1 ) RD Assemblies NAL ELEMEN 0 o C NORMAL SHEAH DA. OD (inches) RAF185L88R48 RAF285L88R48 ± /2 1/4 RAF185L68R8 RAF285L68R8 ± 0.06 /8 /16 R1185L88R48 R1285L88R48 ± 0.1 1/2 1/4 R1185L68R8 R1285L68R8 ± 0.1 /8 /16 R185L88R48 R285L88R48 ± 0.0 1/2 1/4 R185L68R8 R285L68R8 ± 0.0 /8 /16 R5185L88R48 R5285L68R48 ± /2 1/4 P DAMEER OD (inches) R5185L68R8 R5285L68R8 ± 0.01 /8 /16 hermocouple Assemblies For CP thermocouple assemblies use /C types J, K,, or E and options G for grounded junction or U for ungrounded junction as per example. EXAMPLE: P68R8G-04 - CP Specify "X" length in inches using 2 digits, plus any fractional length desired. Examples: 04 = 4", 05(1/2) = Sanitary Cap Size UBE OD (inches) UBE OD (inches) 1 1(1/2) 4 2 (1/2) 6 A4 adapter only 4 erminations 91 16L stainless steel head 6 White polypropylene head 62 White polypropylene head DN, form B 1,W 22 (06) 6 individual eflon leads with terminal pins 1/2 OD, 2 1/4 long extension leadwire 02 transition (requires table 5 & 6 selections from RD section) C Sanitary Cap Style 2 16A cap - Bevel Seat with1-h Nut [1] 5 16 AMP cap - ri-clamp 6 A4 adaptor [1] [1] Must be manually cleaned [2] Not -A authorized Copyright 2005 Pyromation, nc., All Rights Reserved. FD-5 Phone (260) FAX (260) or (800)

4 Fast emperature Response RD s With CP Fittings he sensors listed below are sanitary connected RD temperature sensor assemblies designed to meet the stringent requirements of pasteurization systems. requirements are described in the Grade A Milk Pasteurization Ordinance-2001 Revision. he sensors listed on this page have response times below four seconds and come standard in accuracies at 100 ºC [212 ºF] ± 0.5 ºC. he below listed assemblies are available in a variety of sanitary connections. All wetted parts are ground and polished to a finish that exceeds the No. 4 minimum finish required by the A Sanitary Standards for Sensors and Sensor Fittings and Connections used on Milk and Milk Product Equipment Standard ypical surface roughness average measurement is 15 μin R a or better. he three-wire constructed sensor assembly consists of a high accuracy platinum element sealed inside a 16 stainless steel sheath and a white FDA compliant polypropylene connecting head. he complete assembly provides excellent wash down protection. t is recommended that once customer connections are made, the connecting terminals be further protected by applying a coating of moisture-proof sealant over the connections. " X 1 1/ OD 16 SS SUPPOR UBE YPE 16 SS, /8 OD 04 SANLESS SEEL Maximum temperature limit: 204 C [400 F] Pasteurization est Response ime: 2 to seconds typical ORDER S Example Order Number: R5185L68R Pt100 (α = ºC -1 ) RD Assemblies R185L68R8 R285L68R8 ± 0.0 R5185L88R8 R5285L68R8 ± 0.01 NAL ELEMEN 0 o C Specify "X" length in inches using 2 digits, plus any fractional length desired. Examples: 04 = 4", 05(1/2) = Sanitary Cap Style UBE OD (inches) UBE OD (inches) 1 1(1/2) 4 2 (1/2) 6 A4 adapter only Sanitary Cap Style 4 erminations 91 16L stainless steel head 6 White polypropylene head 62 White polypropylene head DN, form B 1,W 22 (06) 6 individual elflon leads with terminal pins 1/2 OD, 2 1/4 long extension leadwire 02 transition (requires table 5 & 6 selections from RD section) C 2 16A cap - Bevel Seat with1-h Nut [1] 5 16 AMP cap - ri-clamp 6 A4 adaptor [1] [1] Must be manually cleaned [2] Not -A authorized Copyright 2006 Pyromation, nc., All Rights Reserved Phone (260) FAX (260) or (800) FD-6

5 RD s With CP Sanitary Connected Wells he RD sensors listed below are constructed with the CP sanitary connected cap thermowell, which is then mounted into the process with a clamp and mating sanitary cap. A -wire spring loaded RD element and sheath is then screwed into the back of the thermowell. his construction method allows for easy removal of both the well and/or the sensor assembly. he well and sanitary cap in contact with the process are all ground and polished to a finish that exceeds the -A Sanitary Standard ypical surface roughness average measurement is 15 μin R a or better. he complete assembly provides excellent washdown protection. E 1 /4 + A U 1/2 OD ORDER S Example Order Number: R5185L48 - DW SL - 8HN 6 1 Pt100 (α = ºC -1 ) RD Assemblies NAL ELEMEN 0 o C R1185L48 ± 0.1 R185L48 ± 0.0 R5185L48 ± 0.01 RAF185L48 ± 0.06 R1285L48 ± 0.1 R285L48 ± 0.0 R5285L48 ± 0.01 RAF285L48 ± Well ype DESCRPON DW bore sanitary well 2.1 Cap Size Style 15 1, 1 1/2 riclamp 16 AMP 25 2 riclamp 16 AMP 5 2 1/2 riclamp 16 AMP 45 riclamp 16 AMP Other styles - sizes available. Consult factory. 2.2 A Length XX Specify length in inches using two digits. 2. Well Material 09 04SS 08 16SS Element Style SL Spring-loaded element 4 Extensions 8HN 16SS hex fi tting 8PN(E) 16SS pipe nipple specify E length 5 erminations 91 16L stainless steel head 6 White polypropylene head 62 White polypropylene head DN form B 1,W C (specify tag #) Copyright 2006 Pyromation, nc., All Rights Reserved. FD-7 Phone (260) FAX (260) or (800)

Electronic Temperature Sensor

Electronic Temperature Sensor Connection Head Type RTD or Element or RTD Cast Aluminum, Polypropylene or Stainless Steel Head Weather Proof Welded or Spring Loaded TDD TMD Hot Junction: Head Process Connection Conduit Connection 100Ω