Accessories for thermocouple sensors

Transcription

1 Accessories for thermocouple sensors WAERIGH COECIO his stainless steel compression fitting allows watertight connection of a temperature sensor using a stainless steel not adjustable ferrule or a PFE adjustable ferrule. echnical features Working temperature tainless steel ferrule (L) From -50 C to +00 C (ot adjustable) PFE ferrule From -50 C to +50 C (Adjustable) Part numbers Probe Ø (mm) Cylindrical gas tainless steel ferrule PFE ferrule /8'' RCI-/8 RC-/8 ¼'' RCI-/ RC-/ /8'' RCI-/8 RC-/8 ¼'' RCI-/ RC-/ /8'' RCI-/8 RC-/8 /8'' RCI-/8 RC-/8 ¼'' RCI-/ RC-/ /8'' RCI-/8 RC-/8 ½'' RCI-/ RC-/ 8 ¼'' RCI-8/ RC-8/ 8 ½'' RCI-8/ RC-8/ 0 ½'' RCI-0/ RC-0/ ½'' RCI-/ RC-/ ½'' - RC-/

2 AILE EEL HERMOWELL echnical features From -80 C to +00 C Protective duct L, Ø 9x or Ø x mm. Mounting Welded Duct tainless steel L, no welding Process connection tainless steel ½'' G male (other connection on request) Probe connection tainless steel ½'' G female (other connection on request) or fixing screw. Options: reatment with PFE, halar etc waging Accessories: hermo conducting silicone grease 00g (Part number G) From -0 C to +00 C torage > year at room temperature (< 50 C) olvent richlorethane hreaded thermowell Determination of thermowell length ½'' G male D ½'' G female Lu - 0 d Lu Ludoigt ==Lu - -0mm Luprobe 0mm thermowell de gant sonde hermowell with screw connection Determination of thermowell diameter ½'' G mâle D Lu - 0 d Lu Luthermowell = Luprobe - 0mm Determination of thermowell diameter hermowell part numbers thermowell(mm) Ø Informative table: Probe Ø in mm For mounting gap of mm or more, the use of thermo-conducting grease is recommended (G) 7 9 Model hermowell Ø in mm hread Fixing screw DG - F V - Lu thermowell (mm) -

3 FIXAIO Mounting brackets BF : tainless steel (L) mounting brackets for duct fixing of probes Ø and mm. BF : As above, Ø mm. BF 8: As above, Ø 8 mm. Wall mounting support for probe with connection 0 mm 80 mm BF-M: tainless steel ( L) wall mounting support. Delivered with a ½'' G screw nut. Ø 5. mm Ø for ½'' connection' 50 mm Wall mounting support for probe on cable For a probe of 00 mm minimum length FM - : Wall mounting support made of translucent polycarbonate for probe Ø mm and with 00 mm minimum length. FM - : As above, Ø mm. FM - 8: As above, Ø 8 mm. COECOR Compensated standard connector hermocouple Round pin miniature connectors for thermocouple sensors and extension or compensating cable connection. is marked for pin polarity. hermoplastic shielded with glass silk From -50 C to +0 C ocket Plug CF CM Compensated miniature connector ype thermocouple Flat pin miniature connectors for thermocouple sensors and extension or compensating cable connection. is marked for pin polarity. hermoplastic shielded with glass silk From -50 C to +0 C ocket Plug CMF

4 COECOR Compensated standard connector two round pins for the connection of thermocouples and/or with compensating or extension cables. A system of locating pin prevents the inversion of polarity. Reinforced thermoplastic connector Up to +50 C 5: reinforced thermoplastic 5: ceramic emperature resistance 5: 50 C 5: 50 C hermocouple emperature resistance Female CF Male CM Ceramic connector 5 5 Compensated miniature connector two flat pins for the connection of thermocouples and/or with compensating or extension cables. A system of locating pin prevents the inversion of polarity. Up to Up to C C 5: reinforced thermoplastic 5: ceramic emperature resistance 5: 50 C 5: 50 C hermocouple ype emperature resistance Female CMF Male 5 5 Multiple connector with male standard connector Multiple connector for thermocouple. uitable for the simultaneous connection of to standard circuits. Housing In robust steel with epoxy coating Handle In anodised aluminium for an easy grip Cable gland PG for 5 mm max. cable crew terminal block For conductor 0. to mm Compatible with tandard base panel emperature resistance 00 C max 5 PM

5 COECOR (follow-up) Multiple connector with female standard connector Multiple connector for thermocouple. uitable for the simultaneous connection of to standard circuits. Housing In robust steel with epoxy coating Handle In anodised aluminium for an easy grip Cable gland PG for 5 mm max. cable crew terminal block For conductor 0. to mm emperature resistance 00 C max 5 PMF s accessories ilicone rubber boot for connector For wet use, good vibration resistance. emperature resistance: 00 C Delivered by two pieces, for male and female connectors. Appropriate for most of cable diameters. tandard Mini M P Wire clamp bracket tainless steel wire clamp bracket for miniature or standard connectors Model tandard Mini Model M C Locking plate for miniature connector he plate prevents the unwanted disunity of miniatures connectors. Can be placed and removed without any tools hermoplastic with glass silk emperature 00 C max. PV CM

6 AP-O COECOR tandard snap-on connectors hermocouple tandard snap-on connectors with round pins for thermocouple sensors and extension or compensating cable connection. is marked for pin polarity. hermoplastic glass silk shielded From -50 C to +0 C E Miniature snap-on connectors hermocouple tandard snap-on connectors with flat pins for thermocouple sensors and extension or compensating cable connection. is marked for pin polarity. hermoplastic glass silk shielded From -50 C to +0 C EM Round base for standard connector Round base for control panel. Cutout Ø 7 mm hermoplastic with glass silk emperature 00 C max Fixing screws in front face Connection for wire From 0. to mm EC Panel cutout Round base for miniature connector Round base for control panel. Panel cutout Cutout Ø.5 mm hermoplastic with glass silk emperature 00 C max Fixing screws in front face Connection for wire From 0.00 to 0. mm EC M

7 COECOR PAEL For standard snap-on connectors umber of channels,,, 8, or Panel Anodised aluminium (width mm) Dimensions According to number of channels (D = number of channel x 9 + mm) upplied with napped on connectors. hermocouple number PE For miniature snap-on connectors umber of channels,,, 8, or Panel Anodised aluminium (width mm) Dimensions According to number of channels (D = number of channel x 9 + mm) upplied with napped on connectors. hermocouple number PEM *other on request COROL PAEL ensor hermocouple Instrument he connector enables easy and quick access to thermocouple circuit in order to control sensor and instrument accuracies, circuit continuity and loop resistance. PEC

8 CABLE Extension cable PVC / inned copper braid / PVC inned copper braid PVC hermocouple Cable length (m) Conductors section x 0. mm (For c, and ) Conductors composition x 7 strands Ø 0. mm From -0 C to +05 C, short time at +5 C...* CE PB *other on request Pfa / inned copper braid / Pfa inned copper braid Conductors section x 0. mm (For c, and ) Conductors composition x 7 strands Ø 0. mm From -0 C to +50 C hermocouple Cable length (m) Pfa...* CE B *other on request Compensating cable Fep / inned copper braid / Fep (For only) inned copper braid Fep Cable length (m) Conductors section x 0. mm (For c, and ) Conductors composition x 7 strands Ø 0. mm From -0 C to +05 C, short time at +0 C...* CP B - *other on request EXEIO LEAD Lead with choice of connectors and cable hermocouple Lead with miniature plug and socket connectors Lead with standard plug and socket connectors Other on request * Cable PB B V Cable length (m) from -0 C to +05 C from -0 C to +0 C from -0 C to +00 C...* CMF CM CF CMF CM CF CD *with shielded Fep cable only Coiled extension leads Length 0 mm (800 mm uncoiled) Lead with miniature plug and socket connectors Lead with standard plug and socket connectors emperature max. 05 C Other on request CMF CM CF CD CMF CM CF

9 COVERER C-C transmitter 0.5 mm mm o be specified: - emperature range - hermocouple Mounting Connection head DI ''B'' Input hermocouple,,, Output -0 ma wires Accuracy ±0.0 %F ±0.0 of reading or 0.5 C (the biggest) Linearisation E 058--, AM E 0 AI (MC9-) Default range 0 to 000 C Power supply 9 to 0 VDC polarity protected Power supply influence ±0, µa/v Working temperature From -0 to +80 C torage temperature From -0 to +80 C Minimum temperature range 50 C Conversion speed measurements per second Charge calculation according to power supply RLmax (Ω) = (V 9)/0.0 = 80 Ω at 5 Vdc Galvanic insulation 50 Vdc CRD-C-P transmitter (Passive / wires) 58 mm 90 mm 7.5 mm emperature range to be specified Mounting Rail DI symmetric or asymmetrical Input hermocouple,,, Output -0 ma, wires Accuracy ±0.0 %F ±0,0 of reading or 0.5 C (the biggest) Linearisation E 058--, AM E 0 AI (MC9-) Power supply 9 to 0 VDC Default range c = Rang = 0 to 000 C Working temperature From 0 C to +70 C torage temperature From -0 C to +80 C Minimal measuring range 50 C Conversion speed measurements per second Charge calculation according to power supply RL (W) = (V 9)/0.0 Galvanic insulation 50 Vdc Dimensions (mm) Depth 00, width, heigth 75 CRD-C-A transmitter (Active / wires).5 mm 09 mm 0 mm o be specified: - emperature range - Power supply - Output -0 ma 0-0 V Mounting Rail DI symetric or asymmetrical Input hermocouple,,, Output -0 ma or 0-0 V Accuracy ±0. % pe Input resistance 0 M Charge (min.): 500 k Operating voltage: 0 Vac, Vac, Vdc and 0 Vac Working temperature From -0 to +0 C torage temperature From -0 to +0 C

10 COVERER (follow-up) Optional Indicator / Programming front (IF-CRD) Communication interface for parameters modification Can be transferred from one transmitter to another one Display for data process and state MICELLAEOU Alternating current I - AL 00 A: Class power supply for sensors. Mounting with integrated brackets. Input voltage: 0 Vac, output voltage Vac, intensity 00 ma. Direct current I - AL 00 C: Class power supply for sensors, Input voltage: 0 Vac, Output voltage : Vdc, intensity 50 ma. Fang Accessories-C /05/7 RC () Périgueux on-contractual document We reserve the right to modify the characteristics of our products without prior notice. Regulated power supply