FT- Thermocouples FireTECH series. FireTECH Series Thermocouples and accessories 73- Basic technical parameters

Transcription

1 73- FireTECH Series Thermocouples and accessories The FireTech temperature sensors are designed to measure the temperature of the air or hot surfaces in fire test chambers. The FireTECH system includes: sensors with exposed plate with insulator, surface temperature sensors with disc and a range of accessories such as holding tubes and insulators. All components are made according to EN : Temperature sensors with exposition plate. The measuring element is typically thermocouple type K. The measuring point is located on the plate and protected by an insulator against direct contact with fire. The thermocouple construction is vibration-resistant and the special sheath material provides a long working-life while retaining its measuring properties. There are available straight or bent holding tubes. Specially developed tube and plate connection makes it easy to position the plate in the correct position. Surface thermocouples with disk. Sufrace thermocouples type K are made with a measuring disk in 2 possible variants of the measuring hot-junction. The measuring range, type of hot-junction and electrical connection are agreed individually. All sensors are compliant with PN-EN There is a possibility to make other construction according to special requirements, for example with external Teflon insulation, protecting the inner cable (made of fiberglass insulation) from degradation and damage. technical parameters Measurement element Measuring range Responce time (in air) Thermocouple sheath material Compensating cable Exposure plate Dimension Material Process connection Insulating insert Thermocouple NiCr-Ni / K max+1000 o C - TC diameter 1mm max+1100 o C - TC diameter 1,5mm max+1200 o C - TC diameter 2mm max+1200 o C - TC diameter 3mm t0,9=17s, for TC diameter 1mm, max+1000 o C t0,9=25s, for TC diameter 1,5mm, max+1100 o C t0,9=34s, for TC diameter 2 mm, max+1200 o C t0,9=64s, for TC diameter 3 mm, max+1200 o C Inconel (AB Premium) lub Nicrobel (XL) Silicone cable, ambient temperature o C Teflon cable, ambient temperature o C Fiberglass cable, ambient temperature o C other on request Dimensions and material acc. EN , annealed 100 x 100 mm (acc. EN :2012) Inconel welded for mounting holding tube 97x97mm, 280±30kg/m 3, exchangeable Holdingtube Material Diameter 15mm or 22mm

2 Thermocouples with exposure plate 1 Exposure plate Construction acc.to EN Insulator Exchangable 3 Holding tube Diameter 15mm or 22mm straight or bent 4 Fixing for thermocouple Fixing for thermocouple 5 Compensating cable Compensating cable in silicone or fiberglass insulation in braided metal screen; free Ends or plug (sockets) acc. to specifications Drawing 1: Exposure plate 2: Insulating insert 3: Holding tube straight or bent 4: Fixing for thermocouple 5: Cable

3 F T SS Thermocouple + plate with insulator + straight pipe 1 Thermocouple + plate with insulator + bent pipe 2 Thermocouple + plate without insulator + straight pipe 3 Thermocouple + plate without insulator + bent pipe 4 Holding tube Without 0 Ø15,2 mm, Mat Ø22x2 mm, Mat other 9 Thermocouple Typ K (1xK Inconel AB premium) 1 other 9 Thermocuple diameter in [mm] with one decimal place i.e. Ø2,0 mm 2 0 Cable ends Free ends (not tinned) 1 Standard ceramic plug 2 Ends with Autosplice 3 Free ends with Ferrules 4 Standard plug 5 Mini plug 6 Standard HT Plug 7 Mini HT Plug 8 Other 9 Length of thermocouple [The length of the thermocouple extending from the holding tube ] Thermocouple with length matching the holding tube 0 100mm longer than the length of the pipe 1 200mm longer than the length of the pipe 2 300mm longer than the length of the pipe 3 500mm longer than the length of the pipe 5 Other length 9 Standard version 1 1 Next versions 2..9 Length of cable in [m] with two decimal places, i.e.1m 0 0 Length of holding pipe in [mm] i.e. 440mm Type of cable GGP Insulation fiberglas/ fiberglas/ wire braiding SS Insulation silicone/ silicone SS

4 Accessories 3 Exposure plate with connection for mounting the holding tube. The grip connector allows the plate to be set in the correct direction. Replacement insulating inserts are fitted to the plate. 1: Connection to holding tube 2: Positioner for thermocouple 2 1 3: Insulator F T Plate without insula tor 0 0 Plate with insula tor Positioner for thermocouple None 0 0 For thermocouple Ø 1-1,5mm 1 0 For thermocouple Ø 2 mm 2 0 For thermocouple Ø 3 mm 3 0 Dimensions 100x100mm 1 Connection for holding tube None 0 Standard 1 From the side 2 From the bottom 3 Insulating insert 0 8 F T Groove for thermocuple No 0 0 Yes 1 0 Dimensions 97x97mm (for exposure plate) x33mm (for thermocouple with disc) 3 3 other (on request) 9 9 Standard version

5 Accessories: holding tube Holding tube for probes of FireTECH system is made with special connection for mounting exposure plate. The shape and form of connection allows the plate to be positioned in any direction relative to the measuring point. 2 Pipe may be terminated by a fixing element for the measuring thermocouple which also fulfill the role of additional sealing. 1: Connection to exposure plate 2: Fixing for thermocouple 1 Holding tube, straight 8 0 Holding tube, bent 8 1 F T Diameter Ø 15 mm 1 5 Ø 22mm 2 2 Material Steel End of pipe Open pipe 0 Fixing for thermocouple, diameter 1mm 1 Fixing for thermocouple, diameter 2mm 2 Fixing for thermocouple, diameter 3mm 3 Fixing for thermocouple, diameter 1,5mm 4 Fixing for transition sleeve on thermocouple 5 Serial Number Length in [mm] i.e. 2000mm

6 Sheath thermocouple Sheath thermocouple is made with cable with free ends or terminated with an electric al connector such as a plug (mini / standard) or socket. Sheath thermocouple Thermocouple type K, material Inconel AB Premium 7 1 Thermocouple type K, material Nicrobel XL 7 2 F T Sheath diameter 1,0mm 1 0 1,5 mm 1 5 2,0 mm 2 0 3,0 mm 3 0 Cable ends Free Ends (not tinned) 1 Ceramic Standard plug 2 Autosplice 3 Ends with Cable End Sleeves 4 Standard plug 5 Mini Plug 6 HT-Plug, size Standard 7 HT-Plug, size Mini 8 other 9 Calibration protocoll 0 (none) 4 (4 points, please describe in additional text) Cable length Cable length in m with 2 decimal places i.e. 2,0 mm Probe length in mm i.e. 1500mm

7 Thermocouples with disc Surface thermocouples with disc are made with cable terminated with different types of electrical connectors (plug, socket etc.). The shape and method of joining the measuring weld is made in accordance with EGOLF requirements. Thermocouple with disc 5 Diameter of wires 0, , , 0 F T G G Cable ends Free ends (not tinned) 01 Without ends 96 Soldering ends, (tinned)) 02 Direct connected to.. 97 Ends with Autosplice 03 Other 98 Ends with Ferrules 04 other plug / socket 99 Standard plug 11 Standard socket 21 Mini plug 12 Mini socket 22 HT-Standard plug 13 HT-Standard socket 23 HT-Mini plug 14 HT-Mini socket 24 Ceramic standard plug 15 Ceramic standard socket 25 Lemo plug size.6 Lemo socket size.0 26 Lemo plug size.1 17 Lemo socket size.1 27 Lemo plug size.2 18 Lemo socket size.2 28 Lemo plug size.3 19 Lemo socket size.3 29 Hot-junction version A (standard) 1 version B (through a disc) 2 Cable length Cable length in m with 2 decimal places i.e. 1,5m 5 0 Disc diameter Diameter 12mm 1 2 Cable insulation GG Fiberglass/ Fiberglass G G SS Silicone / Silicone