UEW5 series intelligent air circuit breaker

Transcription

1 UEW5 series intelligent air circuit breaker UEW5 series intelligent air circuit breakers are applicable to the power distribution circuit under the condition of AC50Hz/60Hz, rated working voltage 400V or 690V, rated current 630~6300A, and take the role of distributing power and protecting wires and equipments from being damaged by overload, under-voltage, short circuit and ground fault etc. The breakers with rated current below 1000A can also be used for the infrequent motor starting-up. The circuit breaker, with intelligent protection function, precise selective protection, can improve reliability and safety and avoid unnecessary power failure. UEW5-2000/ M- Drawer type Accessories frame current Number of poles current Intelligent controller Installation method See Tablet 1 See Table 2 3P/4P See Table 2 L/M/H AC400V,230V, DC220V,110V Table 1 Installation under voltage release Shunt release Pick up Auxiliar y switch Opening lock Mechanical interlock Frame draw-out AC380V,220V AC380V,220V AC380V,220V 4NO 4NC one lock one key horizontal interlock draw-out fixed instantaneous delay 1s,3s,5s DC220V,110V DC220V,110V 4NO 4NC 3 locks 2 keys mechanical interlock fixed

2 Main specification Table 2 Type UEW frame current Inm(A) 2000 current In(A) working voltage Ue(V) AC400/AC690 insulation voltage Ui(V) AC690 Number of poles current of N pole IN(A) 50% 或 100% In ultimate short-circuit breaking AC400V capacity Icu(kA) (effective value) AC690V service short-circuit breaking AC400V capacity Ics(kA) (effective value) AC690V short circuit making capacity AC400V Icm(kA) (peak value) AC690V short time withstand current (1s) AC400V Icw(kA) (effective value) AC690V Full breaking time (without additional delay) (ms) 25~30 Closing time(ms) 70 at maximum Basic Intelligent controller Multi-functional Communication Dielectric performance 50Hz AC 2500V 1min AC400V Electrical life Operational AC690V performance Non-maintenance Mechanical life Maintenance Connection pattern horizontal horizontal horizontal horizontal horizontal horizontal vertical vertical vertical vertical vertical vertical Pattern Draw-out Fixed Draw-out 3P 395x362x323 Externality Draw-out 4P 395x457x323 dimensions Fixed 3P 433x375x420 HxWxL(mm) Fixed 4P 433x470x420

3 Main specification Table 2 UEW UEW UEW AC400/AC690 AC % 或 100% In / / / /85 80/85 80/ / / / /85 80/85 80/ ~30 70 at maximum AC 2500V 1min horizontal horizontal horizontal horizontal horizontal horizontal horizontal horizontal horizontal horizontal vertical vertical vertical vertical 395x422x x544x x435x x550x x928x x550x x788x x1043x486

4 UEM5 series molded case circuit breaker UEM5 Series Molded Case Circuit Breakers (MCCB for short) are applicable to the electrical network under the condition of AC50Hz/60Hz, rated working current 10A - 800A, rated insulation voltage 690V and rated working voltage 400V or below with overload, short-circuit and under-voltage protection performances, and can be used to protect the wires and equipment from damage. Normally, the circuit breakers also take the role of infrequent turn-on or turn-off and infrequent motor starting-up. The circuit breakers are of characteristics of compact structure, small size and high breaking capacity, which can be equipped with the accessories such as under-voltage release, shunt release, auxiliary contact, alarm contact, motor-driven operation mechanism, turning operation handle and etc. This series of circuit breakers have a disconnecting function and the corresponding symbol is shown as. Installation pattern code Frame Current Inm=63 Inm=100 Inm=225 Inm=400 Inm=800 Operation Pattern No code: direct operation P: motor-driven Z: turning handle Number of poles 3: three poles 4: four poles Application code No code: for power distribution protection No code: wiring in front of the board H: wiring on back of the board R: wiring by insertion 2: for motor protection UEM5-100 M P / A H Short circuit breakers capacity L: typical M: second high breaking type current Code for release pattern and internal accessories Refer to the release pattern The N-pole of the four-pole Refer to the release pattern and internal accessories codes and internal accessories in detail codes in detail

5 Main specification ultimate/ Wiring in front Type current(a) Pole number insulation voltage Ui working voltage service short-circuit breaking capacity of board Installation (V) Ue(V) Icu / Ics (ka) dimension(mm) UEM5-63L 10,16,20,25, 32,40,50,63 3/4 AC500 35/20 X Y UEM5-100L 10,16,20,25, 3 35/22 X Y UEM5-100M 32,40,50,63 3/4 50/ UEM5-225L 100,125,140, 3 35/25 X Y UEM5-225M 160 3/4 50/ UEM5-225L 3 35/25 180,200,225 UEM5-225M 3/4 AC400 50/35 AC690 UEM5-400L 225,250,315, 3 50/42 X Y X Y UEM5-400M 350,400 3/4 65/ UEM5-800L 400,500, /50 UEM5-800M 3/4 65/50 UEM5-800L 700, /50 UEM5-800M 3/4 65/50 X Y X Y

6 UEM5L series molded case circuit breakers with residual current protection UEM5L Series molded case circuit breakers with residual current protection (circuit breakers for short below) are applicable to the electrical network under the condition of AC50Hz/60Hz, rated working current 16A~800A, rated insulation voltage 690V and rated working voltage 400V or below, which can be used to protect human body and equipment from electric shock and residual current, as well as to prevent from fire danger due to earth-fault current caused by equipment insulation damage. Normally, the circuit breakers also take the role of infrequent turn-on or turn-off and infrequent motor starting-up. The circuit breakers are of characteristics of compact structure, small size and high breaking capacity, which can be equipped with the accessories such as under-voltage release, shunt release, auxiliary contact, alarm contact, motor-driven operation mechanism, turning operation handle, etc. This series of circuit breakers have a disconnecting function and the corresponding symbol is shown as. Frame Current Inm=100 Inm=225 Inm=400 Inm=800 Operation Pattern No code: direct operation P: motor-driven Z: turning handle Number of poles 3: three poles 4: four poles Application code No code: for power distribution protection 2: for motor protection Installation pattern code No code: wiring in front of the board H: wiring on back of the board R: wiring by insertion residual current circuit breakers UEM5 L L P / A H Short circuit breaking capacity Code for release pattern and internal The N-pole of the four-pole L: typical current accessories Refer to the release pattern M: related high breaking type Refer to the release pattern and and internal accessories internal accessories codes in detail codes in detail

7 Main specification Type current(a) Pole number insulatio n voltage Ui(V) working voltage Ue(V) residual operating current I n (ma) Delay time (s) ultimate/ service short-circuit breaking capacity Icu / Ics (ka) UEM5L-100L 16,20,25, 3 35/22 UEM5L-100M 32,40,50, 63,80,100 3/4 Non-time 50/35 30/100/300 delay/ UEM5L-160L 100,125, 3 35/25 adjustable 0.1/0.3 UEM5L-160M 140,160 3/4 50/35 adjustable UEM5L-225L 180,200, /25 UEM5L-225M 5 3/4 50/35 UEM5L-400L 3 AC690 AC400 Non-time 50/42 225,250,31 100/300/500 delay 5, UEM5L-400M 3/4 adjustable 0.2/0.5 65/50 350,400 adjustable UEM5L-630L 400,500,63 3 Non-time 50/50 UEM5L-630M 0 3/4 300/500/1000 delay 65/50 UEM5L-800L 630,700,80 3 adjustable 0.5/1 50/50 UEM5L-800M 0 3/4 adjustable 65/50 Remark: 3-pole units with residual current protection will be a special standard

8 UEM5Z 1 series electronic molded case circuit breakers UEM5Z 1 series electronic molded case circuit breakers (circuit breakers for short below) are applicable to the electrical network under the condition of AC50Hz/60Hz, rated working current 800A, rated insulation voltage 690V and rated working voltage 400V or below, with overload long-delay definite time, instantaneous short-circuit and under-voltage protection functions. Normally, the circuit breakers also take the role of infrequent turn-on or turn-off and infrequent motor starting-up. The circuit breakers are of characteristics of compact structure, small size and high breaking capacity, which can be equipped with the accessories such as under-voltage release, shunt release, auxiliary contact, alarm contact, motor-driven operation mechanism, turning operation handle, etc. This series of circuit breakers have a disconnecting function and the corresponding symbol is shown as Frame Current Inm=100 Inm=225 Inm=400 Inm=800 Operation Pattern No code: direct operation P: motor-driven Z: turning handle Number of poles 3: three poles 4: four poles Application code No code: for power distribution protection 2: for motor protection Installation pattern code No code: wiring in front of the board H: wiring on back of the board R: wiring by insertion intelligent over-current tripper (withour residual proction) UEM5 Z1-100 L P / A H Short circuit breaking capacity Code for release pattern and internal The N-pole of the four-pole L: typical current accessories Refer to the release pattern M: Related high breaking capacity type Refer to the release pattern and and internal accessories codes internal accessories codes in detail in detail

9 Main specification Type current (A) Setting current Ir1 (A) Pole number insulation voltage Ui (V) working voltage Ue(V) ultimate/ service short-circuit breaking capacity Icu / Ics (ka) Wiring in front of board Installation dimension UEM5Z 1-100L 10~32A 3 35/22 UEM5Z 1-100M 32,100 adjustable 40~100A 3/4 50/35 X Y adjustable UEM5Z 1-225L 100~225A 3 35/ UEM5Z 1-225M adjustable 3/4 50/35 AC690 AC400 UEM5Z 1-400L 200~400A 3 50/ UEM5Z 1-400M adjustable 3/4 65/50 UEM5Z 1-800L 400~630A 3 50/ UEM5Z 1-800M adjustable 3/4 65/50 UEM5Z 1-800L 600~800A 3 50/ UEM5Z 1-800M adjustable 3/4 65/50 X Y X Y X Y X Y

10 UEM5Z 2 series electronic MCCB with residual current protection UEM5Z 2 Series electronic molded case circuit breakers with residual current protection(circuit breakers for short below) are applicable to the electrical network under the condition of AC50Hz/ AC60Hz, rated working current 800A, rated insulation voltage 690V and rated working voltage 400V or below with overload long-delay inverse time, short-circuit short-delay inverse time, short-circuit short-delay definite time, instantaneous short-circuit and under-voltage protection. Normally, the circuit breakers also take the role in infrequent turn-on or turn-off and infrequent motor starting-up. The circuit breakers are of compact structure, small size and high breaking capacity, which can be equipped with the accessories such as under-voltage release, shunt release, auxiliary contact, alarm contact, motor-driven operation mechanism, turning operation handle, etc. This series of circuit breakers have a disconnecting function and the corresponding symbol is shown as. Frame Current Inm=100 Inm=225 Inm=400 Inm=800 Operation Pattern No code: direct operation P: motor-driven Z: turning handle Number of poles 3: three poles 4: four poles Installation pattern code No code: wiring in front of the board H: wiring on back of the board R: wiring by insertion intelligent over-current tripper(residual proction) Application code No code: for power distribution protection 2: for motor protection Z2-100 L P / A H UEM5 Short circuit breakers Code for release pattern and internal The N-pole of the four-pole capacity current accessories Refer to the release pattern L: typical Refer to the release pattern and and internal accessories codes M: second high internal accessories codes in detail in detail breaking type

11 Main specification Ultimate/ Type Intelligent Releasing current(a) Intelligent Releaser Setting Current(A) Pole number Insulation Voltage Ui(V) working Voltage Ue(V) Residual Action Current IΔn(mA) Delay time(s) Service short-circ uit breaking capacity Icu / Ics (ka) UEM5Z 2-100L 10~32A 3 35/22 UEM5Z 2-100M Adjustable 32,100 Non-delay 40~100A 3/4 30/100/300 50/35 /0.1/0.3 Adjustable Adjustable adjustable UEM5Z 2-225L 100~225A 3 35/ UEM5Z 2-225M Adjustable 3/4 50/35 UEM5Z 2-400L 3 AC690 AC /300/50 Non-delay 50/42 200~400A UEM5Z 2-400M /0.2/0.5 Adjustable 3/4 65/50 Adjustable adjustable UEM5Z 2-800L 400~630A 3 50/ /500/10 Non-delay UEM5Z 2-800M Adjustable 3/4 65/50 00 /0.5/1 UEM5Z 2-800L 600~800A 3 50/ Adjustable adjustable UEM5Z 2-800M Adjustable 3/4 65/50 Remark: 3-pole units with residual current protection will be a special standard

12 UET5 series automatic transfer switching UET5 Series automatic transfer switching is applicable to the double-circuit power supply (power distribution to power distribution, or power distribution to generator), rated frequency 50HZ/60HZ, and rated voltage 400V. The power is shifted automatically when one power breaks down, which ensures the reliability and safety of the power supply and makes the power switch to achieve the intelligent unmanned operation and remote control. This device adopts a motor-driven operation mechanism with patent technique, providing with multifunctional intelligent controllers to meet various market demands. This device conforms to GB/T standard. UET5- / - Transfer mechanism: Y- Integrative F-Split Power supply: A- power distribution power distribution; B-power distribution- generator N-pole types for 4-pole circuit breaker Type A: N-pole without over-current release, it has been switch-on all along, and does not act as other three poles. Type B: N-pole without over-current release, it acts as other three poles. Type C: N-pole fixed with over-current release, it acts as other three poles. Type D: N-pole fixed with over-current release, it has been switch-on all along, and does not act as other three poles. Code of release pattern and accessories: 200-Electromagnetic release 300- Thermo/ electromagnetic release Number of Pole: 2-two poles; 3-three poles; 4-four poles current of the breakers short circuit breaking capacity rating frame current of the breakers Remark:UET5-63 only with Integrative Structure(Y), Power distribution-power distribution Structure.

13 Main specifications & Performance parameter Type Short circuit breaking capacity Current (A) Pole number Insulation Voltage Ui(V) working Voltage Ue (V) Ultimate/ working short-circuit breaking capacity Icu / Ics (ka) 6,10,16, 6 UET ,25,32, 40,50,63 3/4 AC500 AC L 16,20,25, 3 35/22 UET5-100 M 32,40,50, 63,80,100 3/4 50/35 L 100,125,140, 3 35/25 UET5-225 M 160,180,200, 225 3/4 AC690 AC400 50/35 UET5-400 UET5-800 L 225,250,315, 3 50/42 M 350,400 3/4 65/50 L 400,500,630, 3 50/50 M 700,800 3/4 65/50 Remark: UET5-63 Series automatic transfer switches have been equipped with XMB0 series min. circuit breaker.

14 UET6 series automatic transfer switching UET6 series automatic transfer switching equipment consists of switch main body and transfer controller.the product adopts electromagnetic-driven, the transfer controller adopts main and backup power supply of working voltage AC 220V, which requires no additional control power supply. The switch body has electric or mechanical switch-on indicator, which can be used as an indicator for disconnect function. This product is of compact size, simple structure, easy operation, quick transferring speed and long usage life. The product conforms to GB/T standard. UET6-2:Two-pole(Only for products below 125A) 3:Three-pole 4:Four-pole current NA: Integrative styles ATS below 125 A (non- generator starts function) C: Split style ATS below 125 A T: current from 160A to 400A two sections split ATS TN: current from 160A to 400A three sections split ATS M: current from 630A to1600a two sections split ATS frame current

15 Main Spec. and Performance Parameter Endurance life(cycle) Type current(a) Pole number Operating current(a) insulation voltage Ui (V) Mechanical life Electrical life Operation Frequency UET6-32NA 16,20,25,32 UET6-125NA 40,50,63, 80,100,125 2,3, s/cyc. UET6-32C 16,20,25,32 UET6-125C 40,50,63, 80,100, ,200,250 2,3, s/cyc. 3 UET6-400T, 315, s/cyc. UET6-400TN 200, s/cyc , s/cyc , s/cyc. UET6-1600M , s/cyc , s/cyc , s/cyc.

16 XMB0-63 series mini circuit breaker Conform to standards GB and IEC ; With protective functions of overload and short circuit; Can be equipped with various accessories, such as residual release, auxiliary contact, alarm contact, shunt release, under voltage release, bus bar and so on; Adopt any combination, the matched modular and modulus structure series; Adopt TH35mm standard din rail, easy installation; working voltage: AC230 / 400V; working current: 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A; Releasing characteristic: B type instantaneous releasing current: 3-5In, for non-inductance or tiny-inductance circuit. C type instantaneous releasing current: 5~10In, for illumination distribution circuit D type instantaneous releasing current: 10~20In, for industrial distribution system The product is applicable to the lead wires which are 25mm² or below. XMB0 63 / Pole number: 1P, 2P, 3P, 4P operating current:6, 10, 16, 20, 25, 32, 40, 50, 63 Instantaneous tripping characteristic Type B: 3~5In Type C: 5~10In Type D: 10~20In frame current

17 XMB0 series high breaking capacity mini circuit breaker (MCB) XMB0 Series miniature circuit breaker is of high breaking capacity and current-limiting characteristic, with power insulated function. Dual-use terminal can connect with both bus bar and lead with optional insertion direction. MCB can be assembled to the combined switches by multi accessories. MCB is used to protect the circuit from overload and short circuit of AC 50Hz/60Hz, rated Voltage 230/400V, rated current under 63A, and can be applicable to infrequent turn-on and turn-off operation and electrical insulation. The products conform to standards IEC60898 or GB XMB C Pole number 1P,2P,3P,4P current 6,10,16,20,25, 32,40,50,63A Instantaneous characteristic types B/C/D

18 XMB0 series MCB with single-mould and dual-cutting Conform to the standards IEC60898 and GB High breaking capacity 6kA voltage 230V Small size, the width for one mould about 18mm Wide current range, can reach up to 40A Interruptible shunt, more reliable High terminal connection capacity 1~16mm 2 Protect the electric circuit from overload and short circuit Applicable for protecting the civilian illumination and socket loop XMB C N Pole number 1P+N current 10,16,20,25, 32,40A Instantaneous characteristic types Interruptible shunt C

19 XMBL0-32 series residual protection circuit breaker Conform to standards GB and IEC ; With the all characteristics of XMB0-63 mini circuit breaker; With protector of over load, short circuit and leakage; operating voltage:ac230 / 400V; operating current:6a, 10A, 16A, 20A, 25A, 32A,(40A),(50A); Releasing characteristic: Type C instantaneous tripping current 5~10In, applied in illumination distribution system; operating short circuit breaking capacity: 6KA; The product is applicable to lead wires which are 10mm² or below. X MBL0 32 C / Pole No.:1P+N,2P,3P,3P+N,4P operating current:6, 10, 16, 20, 25, 32,(40),(50) Type C instantaneous tripping frame current Notice: The special standard products for bracket

20 XMBL0 series dual mould residual circuit breaker (RCBO) Conform to standards IEC61009 and GB With residual, overload and short circuit protective function Very high breaking capacity Compact structure, small size(2 mould for 36mm width) The N shunt with interruptible function, more reliable. Double functioned terminal, better connection capacity Wide rated current range, can be applied in the main switch for house The surge protective current to 3000A The circuit board past the 168 hours aging test With contact status indicator Optional line insertion Ultimate breaking capacity 8kA voltage 230V.a.c current 6~40A Frequency 50/60Hz residual operated current 30mA Connected lead section max.25mm 2 Standard installation din rail XMBL C E Pole number Instantaneous Electronic 2Poles with 1 current characteristic protective pole 6,10,16,20, types 25,32,40A C/D Notice: Can provide the over voltage protective products based on customer s needs (280±5%V).

21 XMG0 series insulated disconnector Applicable for industrial, commercial and civilian electric line as main disconnector. Conform to standards IEC ,GB voltage 230/400V.a.c Frequency 50/60Hz Application type: AC-22B Double functioned terminal, high connection capability Connect to lead section max.50mm 2 With contact status indicator XMG Pole number 1P,2P,3P,4P current 40,63,80,100A

22 UES5 Series Surge Protector UES5 series surge protector, which conforms to standards IEC ,GB , and is applicable to various power supply systems of AC 50Hz/60Hz and rated voltage 380V. The product has a lapsing-divorcement device and a reliable operating status indication, and the function of remote communicated contact is available to achieve long-distance control; the response time is less than 25 nanoseconds, and the product adopts 35mm electrical rail with safe use and easy installation. Protection grade B,C,D Norminal current In(kA) Remote signal UES5 C/ X Pole 1,2,3,4, Max. continuous working voltage 1+NPE, 2+NPE, 3+NPE

23 Type Conforming standard working Voltage Un discharge current In(8/20us) Max. discharge current In(8/20us) Responding time t(ns) Protecting grade accordance with IEC529 UES5D/ UES5D/ UES5D/ UES5D/ UES5D/ kA 10kA UES5D/ UES5D/ UES5D/ UES5D/ kA 20kA UES5C/ UES5C/ UES5D/ UES5D kA 40kA UES5C/ UES5C/ UES5C/ UES5C/ kA 60kA UES5B/ UES5B/ UES5B/ UES5B/ kA 80kA UES5B/ UES5B/ UES5B/ kA 100kA UES5B/ UES5B/ UES5B/ IEC GB kA 140kA Below 25 IP20

24 UEB-63 series Miniature Circuit Breaker UEB-63 Series Miniature Circuit Breaker Overview and principle UEB-63 series miniature circuit breaker (MCB) mainly used in the circuit of AC 50/60Hz, rated voltage 230V/400V, rated current under 63A, to protect the circuit and electric equipments of building and the similar places from over current, it s also applicable for the infrequent opening and closing operation. Type nomenclature Application condition Number of poles: 1P, 2P, 3P, 4P current: 1A, 2A, 3A, 4A, 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A Instantaneous tripping characteristic: Type B: 3~5In Type C: 5~10In Type D: 10~20In Breaking capacity: H for 10k A Frame current (A) Miniature circuit breaker Corporation code: Homer Without code: 6kA Ambient temperature: -5C~ +40C ; Relative humidity 95% (under 20) Altitude2000m; Pollution degree: class 2; The places no obvious vibration and shock

25 UEB-63 series Miniature Circuit Breaker Conforming standard Products features Overload and short circuit protection; Use the arc resistant material, high breaking capacity, long electrical life; Use the safe wiring structure against the electrical shock; The shelf and the parts use the imported high flame and stamping resistance plastic Module structure for free combination; Suitable for disconnecting, symbol is Main specification voltage: AC230 / 400V; current: 1A, 2A, 3A, 4A, 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A; Instantaneous tripping characteristic Type B: Type C: 3~5In, 5~10In, Type D: 10~20In; Breaking capacity: 6kA, 10kA; Number of poles: 1P, 2P, 3P, 4P - 2 -

26 UEB-63 series Miniature Circuit Breaker Wiring capacity 35mm² and below Dimension Products selection table UEB-63 seris Pole no. Type B Type C Type D current Breaking capacity - 3 -

27 UEB-63 series Miniature Circuit Breaker Pole no. Type B Type C Type D current Breaking capacity - 4 -

28 UEB-63 series Miniature Circuit Breaker UEB-63H Series Pole no. Type B Type C Type D current Breaking capacity - 5 -

29 UEB-63 series Miniature Circuit Breaker UEB-63H series Pole no. Type B Type C Type D current Breaking capacity - 6 -

30 UEBL-63/40 H series Residual current circuit breaker UEBL-63/40(H) series residual current circuit breaker Overview and principle mainly used in the circuit of AC 50/60Hz, rated voltage under 400V, rated current under 63A, to protect the circuit and electric equipments of building and the similar places from over current, as well as providing the protection once the over current equipment fault and the fire risk due to the ground current fault it s also applicable for the infrequent opening and closing operation. Type nomenclature Number of poles: 1P+N,2P,3P,3P+N,4P current(a): 6A,10A,16A,20A,25A, 32A,40A,50A,63A Instantaneous tripping characteristic: Type C: 5~10In Type D: 10~20In breaking capacity: H: 10kA, Without H: 6kA Frame current: 63, 40 Residual current circuit breaker Corporation code: Homer - 7 -

31 UEBL-63/40 H series Residual current circuit breaker Conforming standard Application condition Ambient temperature: -5C~ +40C Relative humidity 95% (under 20) Altitude2000m; Pollution degree: class 2; The places no obvious vibration and shock. Products features It s of the all features of UEB-63 series MCB; Overload, short circuit and residual current protection; Protect the human from the indirect contact; Provide the supplementary protection from the direct contact; Provide the protection on insulation failure of electric equipment (Such as electric fire); Manual control: handle allows two kinds of reset mode Circuit breakers and residual current operated devices reset at the same time Circuit breakers and residual current operated devices reset individually, residual current operated device resets before the circuit breaker resets. Prevent transient overvoltage (Lightening, state grid operation) caused by the malfunction

32 UEBL-63/40 H series Residual current circuit breaker Main specification UEBL-63 series voltage: AC230/400V; current: 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A; Instantaneous tripping characteristic: Type C: 5~10In, applied in the distribution circuit illumination; Type D: 10~20In, applied in the industrial distribution system; Breaking capacity: 6kA, 10kA; residual operated current: 30mA Number of poles: 1P+N,2P,3P,3P+N,4P UEBL-40(H) series voltage: AC230; current: Type C: 6A, 10A, 16A, 20A, 25A, 32A, 40A; Type D: 6A, 10A, 16A, 20A; Instantaneous tripping characteristic: Type C: 5~10In, applied in the distribution circuit illumination; Type D: 10~20In, applied in the industrial distribution system; Breaking capacity8ka residual operated current: 30mA Number of poles: 1P+N Wiring capacity 35mm² and below(uebl-40 series for 25mm 2 and below) - 9 -

33 UEBL-63/40 H series Residual current circuit breaker Dimension

34 UEBL-63/40 H series Residual current circuit breaker Products selection table UEBL-40Hseries Pole no. Type C Type D current Breaking capacity

35 UEBL-63/40 H series Residual current circuit breaker UEBL-63 series Pole no. Type C Type D current Breaking capacity

36 UEBL-63/40 H series Residual current circuit breaker UEBL-63 series Pole no. Type C Type D current Breaking capacity

37 UEBL-63/40 H series Residual current circuit breaker UEBL-63H series Pole no. Type C Type D current Breaking capacity

38 UEBL-63/40 H series Residual current circuit breaker UEBL-63H series Pole no. Type C Type D current Breaking capacity

39 UEG0-100 series disconnector Disconnector UEG0-100 series Application To make and break the circuit under the load condition, it s of disconnecting function, which can disconnect the circuit during inspection and maintenance. Type nomenclature Number of poles: 2P3P4P current: 40A63A80A100A Frame current Corporation code: Homer Products features Applicable in the industrial, commercial and residential circuit as the main switch. Conform to IEC ,GB standard voltage: AC230/400V Frequency: 50/60Hz Use type: AC-22B Double function terminal, strong wiring capacity Connection lead section area: max.50mm 2 It s of contact status indicator 16

40 UEG0-100 series disconnector Disconnector Products selection table Max wiring Pole no. Type current (A) capacity (mm²) voltage V Width mm 17

41 XMC0 Series Definite Purpose Contactors Description HOMER XMC0 series high performance definite purpose contactors (1-Pole, 1-Pole+1Shunt, 1-Pole+1NC, 1-Pole+1NO, 2-Pole, 3-Pole,3-Pole+1NC and 3-Pole+1NO,from 12A to 90A ) are ideal for(hvac)air conditioning, refrigeration, heating, data processing, welding, elevators, hoists & cranes, washing machine, lighting, pools & spas and food service equipment. XMC0 series definite purpose contactors meet ARI 780 and UL508 standard Features 1. Unique structure of amortization system eliminates contact bounce. 2. No tools required for snap-on accessories require that make modification quick and easy. 3. Various terminal options for specific application needs. 4. Easy to change coil. 5. Universal mounting plate allows easy replacement for other brands. 6. Heavy duty Silver Metal Oxide composition contacts ensure long electrical endurance. 7. Coils are Class F (155 ) temperature insulated with wide range of voltage and 50/60Hz ratings. 8. Double E Magnet Assembly provides optimal performance with reduced power consumption. 9. Effective dustproof structure. 10. UL, TÜV, CCC, CE approved. Type model nomenclature - Ordering Information XM C Number digit 1: Manufacturer s code XM Xiamen Hongmei Electronic Co., Ltd. Number digit 2: Product Type C Contactor - 1 -

42 Number digit 3: Design Sequence Number 0 Number digit 4: Full Load Amperes (FLA) 12, 18, 20, 25, 32, 40, 50, 63, 75 or 90 Number digit 5: Number of Poles 1,2, 2R, 3, 3A, 3B,3R, 5, 6, 7, 8 or 9 Number digit 5 Number of poles Number digit 5 Number of poles 1 2* 2R 3 3A 3B 1-pole+ 2-pole 2-pole 3-pole 2-pole 3-pole 1shunt (1a1b) (3pl frame) (small frame) 3R pole 3-pole+1NC 3-pole+1NO 1-pole+1NC 1-pole+1NO 1-pole (2a1b) ( small frame) (small frame) Number digit 6: Coil Voltage D, E, F, I, L, N, U Number digit 6 D E F I J* L N U Coil voltage 50Hz 12V 24V V V 220V V V 60Hz 12V 24V V V V V V Number digit 7: Mounting plate A, B A plastic base B metal plate Number digit 8: Cover A, B A long cover B short cover Number digit 9: Terminal A, B, C, D, E, F A screw w/quick connect B sems clamp w/quick connect C slotted & hex head washer w/ quick connect D box lug w/ quick connect E box lug w/quick connect (Line) slotted&hex head washer w/quick connect (Load) F slotted&hex head washer w/quick connect (Line) box lug w/quick connect (Load) - 2 -

43 Number digit 10: Auxiliary contact blocks (for 3-pole) (Left & Right) side 0, 1, 3, 4, 5, 6, 1P, 3P, 4P, 5P, 6P Auxiliary contact block at left Auxiliary contact block at right 0- None (Standard type) 1-1NC+1NO, pressure plate screws w/ quick connect 3-1NC, pressure plate screws w/ quick connect 4-1NO, pressure plate screws w/ quick connect 5-2NC, pressure plate screws w/ quick connect 6-2NO,pressure plate screws w/ quick connect 1P- 1NC+1NO, pressure plate screws 3P- 1NC, pressure plate screws 4P- 1NO, pressure plate screws 5P-2NC, pressure plate screws 6P-2NO, pressure plate screws For example: 34P- 1NC pressure plate screws w/ quick connect at left and 1NO pressure plate screws at right 56-2NC pressure plate screws w/ quick connect at left and 2NO pressure plate screws w/ quick connect at right Number digit 11: Coil terminals Blank, F Blank dual terminals without screws in 1-and 2- pole models and single terminals with screws in 3-pole models. F-dual terminals with screws in 3- pole models. Number digit 12: Power quick terminals Blank, G, D, Q Blank quad terminals in 1-and 2- pole models. dual terminals in 3-pole models. G-without any terminals D-dual terminals in 1-and 2- pole models Q-dual terminals at the side near coil terminal and quad terminals at the other side in 3-pole models. *If this will be the final digit(s) in selection, omit from model nomenclature

44 Characteristics insulation voltage V 690 Conforming to standard IEC , GB , EN60947, ARI780 Approvals CCC UL CSA TÜV SEMKO EK CE Protective treatment Total climate tropical use TH Operating position Vertical ±5 Operating altitude m 2000 Ambient temperature operation -25 ~+70 storage -40 ~+70 Relative humidity 95% at 55 Pollution degree 3 contactor open g 6 Shock resistance 1/2 sine wave=11 ms contactor g 15 closed contactor open g 2 Vibration resistance 5 to 300 Hz contactor g 4 closed Performance XMC0- Poles A 3B insulation voltage V 690 operating voltage V 480/277(60Hz) or 400/240(50Hz)600/345(60Hz) Full load ampere(fla) A Resistive load ampere(rla) A Making capacity(230v cosφ0.45) A 12 FLA Breaking capacity(230v cosφ0.45) A 10 FLA Switching frequency op/h 360 Electrical endurance cycle 200,000 Mechanical endurance cycle 3,000,

45 Pole Characteristics Full Load Amps Resistive Amps Per Pole Locked Rotor amps 230 /277V 480V 600V Horsepower ratings 480V 3 Phase 230V 1 Phase 600V 3 Phase Poles Catalog Number 3P XMC P+1NC XMC P+1NO XMC P XMC P+1NC XMC P+1NO XMC P+Shunt XMC P XMC P(1a1b) XMC0 252R 3P(at 40A frame) XMC P(at 3P) XMC0 253A 3P(at 25A frame) XMC0 253B 3P(2a1b) XMC0 253R 1P+1NC XMC P+1NO XMC P XMC P+1NC XMC P+1NO XMC P+Shunt XMC P XMC P(1a1b) XMC0 322R 3P XMC P(at 3P) XMC0 323A 3P(2a1b) XMC0 323R 1P+1NC XMC P+1NO XMC P XMC P+Shunt XMC P XMC P(1a1b) XMC0 402R 3P XMC P(at 3P) XMC0 403A 3P(2a1b) XMC0 403R 1P+1NC XMC P+1NO XMC P XMC P XMC P(at 3P) XMC0 503A 3P XMC P(at 3P) XMC0 633A 3P XMC P(at 3P) XMC0 753A 3P XMC P(at 3P) XMC0 903A - 5 -

46 Auxiliary contacts block characteristics Conventional thermal current (A) 10 insulation voltage (V) 690 operational current (A) A600(AC-15) 230/380V N600(DC-13) 11O/230V 3/ /1.1 Coil characteristics Part number Inrushed VA Sealed VA Sealed Watts XMC0-1/5/6/ XMC XMC0-3/3A/3R XMC0-3/3B/8/ XMC0-503/ XMC0-753/ Pick-up 0.8Us Voltage Drop-out 0.2Us Dimensions 1-pole/1-pole+shunt/1p+1NC/1pole+1NO (plastic base, 25-40A) - 6 -

47 2-pole compact (plastic base, 25-40A) 3-pole (plastic base, 25-40A) - 7 -

48 1-pole/1-pole+shunt/1p+1NC/1pole+1NO (metal base, 25-40A) 2-pole compact (metal base, 25-40A) - 8 -

49 3-pole (metal base, 25-40A) 3-pole (metal base, 50-63A) - 9 -

50 3-pole (metal base, 75-90A) 3-pole (small frame, plastic base, 12-25A)

51 XMCK Series Definite Purpose Contactors Description HOMER XMCK series AC Contactors are applied for controlling of air conditioning, electric motor load under condition of frequency 50Hz/60Hz, rated insulation voltage 690V, rated current 40A. (IEC standard AC-8a,AC-8b), and can be used for the other home appliance and similar electric motor load. XMCK series AC contactors conform to ARI 780 and UL 508 standard. Features 1. Low cost design project of contactor. 2. Solid configuration design, electric pure steel magnet. 3. Easy to change coil. 4. Compact size and configuration, universal mounting plate allows easy replacement of other brands. 5. Heavy duty Sliver Metal Oxide composition contacts ensure long electrical endurance. 6. Coils are Class F (155 ) temperature insulated with wide range of voltage and 50/60Hz ratings. 7. UL,KETI,TÜV and CCC approved. Type model nomenclature - Ordering Information XM C K Number digit 1: Manufacturer s code XM Xiamen Hongmei Electronic Co., Ltd. Number digit 2: Product Type C Contactor Number digit 3: Design number - K Number digit 4: Resistive Load Ampere(RLA) 25, 30, 40 or 50. Number digit 5: Number of Poles D, DN or 2. Number digit 5 D DN 2 Number of poles 1-pole 1-pole+1shunt 2-pole Number digit 6: Coil Voltage 024, 120, 240, 277 Number digit Hz 24V V V 277V Coil voltage 50Hz 24V V V

52 Number digit 7:Terminal A, B, C, D, E, F A screw w/quick connect B sems clamp w/quick connect C slotted & hex head washer w/ quick connect D box lug w/ quick connect E box lug w/quick connect (Line) slotted&hex head washer w/quick connect (Load) F slotted&hex head washer w/quick connect (Line) box lug w/quick connect (Load) Characteristics insulation voltage V 690 Conforming to standard Approvals IEC , GB , ARI780, UL508 UL/CUR SEMKO KETI CCC Operating position Vertical ±5 Operating altitude m 2000 Ambient temperature operation -25 ~ +70 storage -40 ~ +70 Relative humidity 90-95%RH Pollution degree 3 Performance XMCK- Poles D DN 2 insulation voltage V 690 operating voltage V 480/277,60Hz Or 400/230,50Hz; 600/345,60Hz Full load ampere(fla) A Resistive load ampere(rla) A Making capacity(230v cosφ0.45) A 12 FLA Breaking capacity(230v cosφ0.45) A 10 FLA Switching frequency op/h 360 Electrical endurance(ari 780) cycle 100,000 Mechanical endurance(ari 780) cycle 500,

53 Pole Characteristics Full Load Amps Resistive Amps Per Pole Locked Rotor amps 230 /277V 480V 600V 230V 1 Phase Power 480V 3 Phase 600V 3 Phase P Poles 1P+Shunt Catalog Number XMCK 25D XMCK 25DN 2P XMCK 252 1P 1P+Shunt XMCK 30D XMCK 30DN 2P XMCK 302 1P 1P+Shunt XMCK 40D XMCK 40DN 2P XMCK 402 1P 1P+Shunt XMCK 50D XMCK 50DN 2P XMCK 502 Coil characteristics Part number XMCK- D XMCK- DN Inrushed VA Sealed VA Sealed Watts XMCK Voltage Pick-up Drop-out 0.8U S 0.2U S - 3 -

54 Dimensions 1-pole/1-pole+1shunt 2-pole - 4 -

55 XMC2 Series AC Contactors Description HOMER XMC2 series contactors are developed by Hongmei Electronic according to customer s requirements for high performance, high reliability. It is of wider range coil voltage, better contact operating ability, higher thermal-resistance class and better performance in anti-shock and vibration than same level product. It is applied for controlling of air conditioning electric motor load under condition of 50HZ/60HZ, rated insulation voltage 690V, rated current 32A. (IEC criterion AC-8a, AC-8b). It also can be used in power supply system for long distance making and breaking circuit, controlling electric motor load (IEC category: AC-3, AC-4). It can work with thermal relays to be a magnet starter assembly to protect circuit from over- load current. XMC2 series contactors not only can meet the high requirements for Air conditioning compressor and freezing container but also can be used for all kinds of power system. It s flexible to attach auxiliary contact to meet all customers requirements and providing various contact arrangements: 3P, 3P+1NC, 3P+1NO, 2NO+2NC, 4P. XMC2 series conform to IEC60947, GB/T14048 and ARI 780/790 standards. Features 1. The structure of amortization system is unique, which eliminated contact bounce. 2. Heavy duty Silver Metal Oxide composition contacts ensure long electrical endurance. 3. Various contact arrangements meet different customer requirements. 4. Interface available for Auxiliary contact and protection module, easy to assemble. 5. The maximum ambient temperature can approach Excellent performance on anti- shock and vibration (acceleration 0~20G&40Hz no failure.) 7. Coils are Class H (180 ) temperature insulated with wide range of voltage and 50/60Hz ratings. 8. Two types of coil terminal: double coil terminal and triple coil terminal and easy to change. 9. Easy to change coil. 10. Universal mounting plate, easily replace other brands contactors. 11. Double E Magnet Assembly provides optimal performance with reduced power consumption. 12. Effective dustproof structure

56 Type model nomenclature - Ordering Information XM C Number digit 1 : Manufacturer s code XM Xiamen Hongmei Electronics Co. Ltd. Number digit 2 : Product Type C Contactor Number digit 3 : Design Sequence Number 2. Number digit 4 : Full Load Amperes (FLA) 12, 18, 30, 32, 40, 50 Number digit 5 : Number of Poles 3, 2R, 4, 8 or 9. Number digit 5 3 2R Number of poles 3-pole 4-pole (2a2b) 4-pole 3-pole+1NC 3-pole+1NO Number 6 : coil terminal type: P, S P:Double coil terminal(standard type, can be omitted) S:Triple coil terminal Number digit 7 : Coil Voltage D,E,F,G,I,L,N,U Number digit 7 D E F I L N 60Hz 12V 24V V V 277V V Coil voltage 50Hz 12V 24V 110V V 230V V Remark:Lis common type, it can be removed in regular production. 数字 8:3pole auxiliary contact block -00, 1L, L1, 2L, L2, 1R, R1, 2R, R2, 10, 01, RL,11 00*- None(Standard type, can be omitted) 1L- 1NC at left L1-1NO at left, 2L- 2NC at left, L2-2NO at left 1R- 1NC at right, R1-1NO at right, 2R- 2NC at right, R2-2NO at right 10-1NC+1NO at left 01-1NC+1NO at right RL- 1NO at left, 1NC at right 11-1NO+1NC at both sides - 2 -

57 Characteristics insulation voltage V 690 Conforming to standard Approvals Protective treatment IEC , GB/T , EN , ARI780/790 CCC Operating position Vertical ±5 Operating altitude m 2000 Ambient temperature TH operation -25 ~ +70 storage -40 ~ +70 Relative humidity 95% at 55 Pollution degree 3 Shock resistance 1/2 sine contactor open g 30 wave=11 ms contactor closed g 30 Vibration resistance 5 to 60 Hz contactor open g 10 contactor closed g 15 Performance XMC2- Poles 3 4 2R 8 9 insulation voltage V 690 operating voltage V 480/277(60Hz) or 400/230(50Hz) Full load ampere(fla) A Resistive load ampere(rla) A Making capacity(400v cosφ 0.45) A 12 FLA Breaking capacity(400v cosφ 0.45) A 10 FLA Switching frequency op/h 360 Electrical endurance(ari 780) cycle 200,000 Mechanical endurance cycle 10,000,

58 Pole Characteristics Full Load Amps Resistive Amps Per Pole Locked Rotor amps 230/2 480V 600V 77V 230V 1 Phase Power 480V 3 Phase 600V 3 Phase Poles Part Number 3P XMC P+1NC XMC P+1NO XMC P(2a2b) XMC2 122R 3P XMC P+1NC XMC P+1NO XMC P(2a2b) XMC2 182R 3P XMC P+1NC XMC P+1NO XMC P(2a2b) XMC2 302R 3P XMC P+1NC XMC P+1NO XMC P(2a2b) XMC2 322R 3P XMC P+1NC XMC P+1NO XMC P(2a2b) XMC2 402R 3P XMC P+1NC XMC P+1NO XMC P(2a2b) XMC2 502R Auxiliary contacts block characteristics Conventional thermal current (A) 10 insulation voltage (V) 690 operational current (A) A600(AC-15) 230/380V 3/1.9 N600(DC-13) 110/230V 2.2/1.1 Coil characteristics Part number Inrushed VA Sealed VA Sealed Voltage Watts Pick-up Drop-out XMC2-12~ XMC2-40~ U S 0.3U S - 4 -

59 Dimensions XMC2-12~32A(3P/3P+1NC/3P+1NO/2NO+2NC/4P) XMC2-12~32A with auxiliary contact (3P/3P+1NC/3P+1NO/2NO+2NC/4P) XMC2 Auxiliary Contact - 5 -