Pure-Flo. Ordering Guide.

Transcription

1 Pure-Flo Ordering Guide

2 This brochure contains a comprehensive list of the figure number codes and description for each valve product option available at Pure- Flo. To assist in the ordering process, we have included instructions on how to construct a standard valve figure number in proper sequence. You can also find our e-prism tool available at This tool is a simple means of identifying valve product configuration and nomenclature. This tool will assist in selecting compatible features and proper designation structure. The e-prism tool allows ITT s channel partners to accurately create quotations tailored to themselves and their end users. The platform allows the user to select valve criteria through numerous methods, including figure number, process conditions or valve category. Once the valve is configured, the channel partner has the capability to receive a dimensional drawing, a data sheet, technical manuals, lead times and many other valuable items. All these features and 24 hour access is sure to make doing business with ITT and you even easier. Table of Contents Standard Valve Figure Codes Valve Size Bodies and Polishes Diaphragms Bonnets and Bonnet Options Actuator Options Switches and Actuator Accessories Service Preparation and Quality Documents Obsolete Figure Codes Block Body Figure Codes Page 2

3 Pure-Flo Valve Figure Numbers How to Construct a Standard Valve Figure Number Valve Size Page 3 Bodies and Polishes + + Page 4-5 Diaphragm Page 5 Manual Bonnets, Actuated Bonnets, and Options Page 6 + Actuator Options + Page 7 Switches and Actuator Accessories Pages 8-9 Service Preparation and Quality Documents Page 0 Constructing Figure Numbers Below are examples for constructing a manual and actuated valve figure number. The actuated valve example will be used to build a figure number on pages 3-0. Manual Valve Example Figure Number: -F TME-963 Detailed description: : inch size (DN25) F: Forged 36L SS 49: Triclamp Tube 6: Interior Finish: Ra 25 Microinch Max 0: Exterior Finish: No Mechanical Polish 0: No Electropolish TME: Modified PTFE Diaphragm (FDA)/ Grade B B.C. 963: Plastic PAS Rising Handwheel with Travel Stop Actuated Valve Example Figure Number: -F-428L TME-B209- VSPS48 Detailed description: : inch size (DN25) F: Forged 36L SS 428L: 6 Gauge Extended Tangent Buttweld 6: Interior Finish: Ra 25 Microinch Max 0: Exterior Finish: No Mechanical Polish 0: No Electropolish TME: Modified PTFE Diaphragm (FDA)/ Grade B B.C. B209: Advantage 2.0 Actuator, Fail Close, 0.75 or with a 90# Spring VSPS48: Value Switch Package, Silver Contacts 48V Valve Size Size Inch (DN6) Inch (DN0) Inch (DN5) Inch (DN20) Inch (DN25) Inch (DN32).5.5 Inch (DN40) 2 2 Inch (DN50) Inch (DN65) 3 3 Inch (DN80) 4 4 Inch (DN00) 6 6 Inch (DN50) Figure Number: Configuration Example Valve Size Page 3

4 Bodies and Polishes Body Type 2 Industrial Valve Body - Cast CF3M Stainless Steel 8 Bio-Tek Forged 36L Stn. Stl. BP Bio-Pure Forged 36L Stn. Stl. C Cast CF3M Stainless Steel F Forged 36L Stainless Steel N Body Not Supplied S Swickle Body Cast CF3M Stn. Stl. TBV Tank Bottom Valve TBVCR Tank Bottom Valve 36L BN2 rought 36L Stainless Steel Spec Special Material Body Body Ends Clamp 409 Swagelok TS Fitting 40 Tri-Clamp Sch. 5 Pipe 4 Min. Valine 42 S Clamp 43 Q Clamp 44 I Line-Male 45 I Line-Female 46 Swivel Nut 47 Male Thread 48 ISO.6mm all Tri-Clamp End 49 Tri-Clamp Tube 49S Tri-Clamp Tube 8 Gauge 49S Tri-Clamp Tube 20 Gauge 420 Superior Buttweld 422 Sch. 5 Pipe (ISO Body) Gauge Gauge 425 Sch. 5 Pipe (ANSI Body) 426 Sch. 0 Pipe 427 Sch. 40 Pipe Gauge 428L 6 Gauge Ext. Tangent B Gauge 429L 4 Gauge Ext. Tangent B Gauge B 433 ANSI Flanged 475 6X Mini Fitting B 476 8X Mini Fitting B 477 0X Mini Fitting B 478 2X Mini Fitting B Body Ends (cont.) 479 8X Mini Fitting B 480 4X Mini Fitting B 48 DIN Series 482 DIN Series DIN Series SMS 485 TBV, 45 Degree 4 GA B 486 TBV, 45 Degree 6 GA B 487 TBV, 45 Degree 8 GA B 488 TBV, 45 Degree Tri-Clamp 493 ISO 2.9mm wall 494 ISO.2mm wall 495 ISO.0mm wall 496 ISO.6mm wall 497 ISO 2.0mm wall 498 ISO 2.3mm wall 499 ISO 2.6mm wall Spec Special End Screwed 403 NPT Screwed FLANGED 433R ANSI Flanged w/ Raised Face Second End Code Clamp X07 By Male Thread w/ Gasket Seat X09 Swagelok TS Fitting X0 By Tri-Clamp Sch. 5 Pipe X By Min. Valine X2 By S Clamp X3 By Q Clamp X4 By I Line - Male X5 By I line - Female X7 By Male Thread X9 By Tri-Clamp Tube X9S By Tri-Clamp Tube 8 Gauge X9S By Tri-Clamp Tube 20 Gauge X20 By Superior Buttweld X22 By Sch. 5 Pipe (ISO Body) X23 By 8 Gauge X24 By 20 Gauge X25 By Sch. 5 Pipe (ANSI Body) X26 By Sch. 0 Pipe X27 By Sch. 40 Pipe X28 By 6 Gauge X28L By 6 Gauge Ext. Tangent B X29 By 4 Gauge Second End Code (cont.) X29L By 4 Guage Ext. Tangent B X30 By 2 Gauge B X75 By 6X Mini Fitting B X76 By 8X Mini Fitting B X77 By 0X Mini Fitting B X78 By 2X Mini Fitting B X79 By 8X Mini Fitting B X80 By 4X Mini Fitting B X8 By DIN Series X82 By DIN Series 2 X83 By DIN Series 3 X84 By SMS X85 By ISO X93 By ISO 2.9mm all X94 By ISO.2mm all X95 By ISO.0mm all X96 By ISO.6mm all X97 By ISO 2.0mm all X98 By ISO 2.3mm all X99 By ISO 2.6mm all Spec Special End Tube Extension TE Valve End TE2 Valve End 2 TEA Both Valve Ends & Purge End TEB Both Valve Ends TEP Purge End TEP Valve End (P) & Purge (P3) TE2P Valve End (P2) & Purge (P3) Mechanical Polish - Interior 0 As Cast 2 35 μin Ra (.8 μm) max 6 25 μin Ra (.6 μm) max 7 5 μin Ra (.38 μm) max 8 20 μin Ra (.5 μm) max 9 μin Ra (.28 μm) max 0 0 μin Ra (.25 μm) max SFV BPE SFV Ra 20 Max SFV2 BPE SFV Ra 25 Max SFV3 BPE SFV Ra 30 Max SFV4 BPE SFV Ra 5 Max, EP SFV5 BPE SFV Ra 20 Max, EP SFV6 BPE SFV Ra 25 Max, EP Figure Number: -F-428L Bodies and Polishes Configuration Example F 428L Block Type F Body Ends 428L Second End Code Tube Extension Mechanical Polish - Interior 6 Mechanical Polish - Exterior 0 Electropolish 0 Body Only Page 4

5 Bodies and Polishes (cont.) Mechanical Polish - Exterior 0 As Cast Scotch Brite 2 25 μin Ra (.6 μm) max, elds Scotch Brite 3 35 μin Ra (.8 μm) max, elds Scotch Brite 4 25 μin Ra (.6 μm) max, elds Removed 6 35 μin Ra (.8 μm) max, elds Removed 7 Special Polish Requirement 8 No Ext Body Polish, eld Beads Removed Electropolish 0 No Electropolish 2 Exterior Only 3 Interior and Exterior 4 Interior Only Body Only Y Body Only Supplied Diaphragms Diaphragms B Black Butyl (FDA) E Pure-Life NGE EPDM compound (FDA) EN Elastomer Not Supplied M EPDM (non-fda) P BUNA - N (FDA) PN PTFE Not Supplied TME PTFE (FDA) Grade B B.C. V Viton hite Butyl (FDA) Figure Number: -F-428L TME- Configuration Example Diaphragm TME TME Page 5

6 Manual Bonnets, Actuator Bonnets and Options Manual Bonnets Bio-Tek 8 Standard Bonnet, Non-Sealed 8S Standard Bonnet, Sealed Bio-Pure BPM Standard Bonnet, Non-Sealed BPMC Standard Bonnet, Sealed (COP) Cast Iron 903 Rising Stem with Travel Stop 903S Rising Stem with Travel Stop - Sealed Stainless Steel (36) 93 Rising Stem with Travel Stop 93S Rising Stem with Travel Stop - Sealed 95 CH HL with Travel Stop 95S CH HL with Travel Stop - Sealed 970 Rising Handwheel with Travel Stop Plastic PAS* 963 Rising Handwheel with Travel 963S *NA-2.5 Casting Stop (/2-4 ) Rising Handwheel with Travel Stop - Sealed (/2-4 ) Actuated Bonnets Cast Iron 40 Direct Load Stainless Steel 3 Actuated 3S Actuated - Sealed Ductile Iron 34 Actuated 34S Actuated - Sealed 84 Dualrange 84S Dualrange Sealed Platic PAS* 36 Actuated 36S Actuated - Sealed *NA-2.5 Casting eep Holes 2 Two eep Holes in Bonnet 4 Four eep Holes in Bonnet (3A Internals Only) Electropolish Topworks Topworks S Advantage Spool Optional Coatings C PVDF Coated Topworks C4 hite Epoxy Coated Topworks C7 Nylon Coated Topworks CSpec Coating Specified Bonnet Seal Materials S EPDM S2 Viton Optional Bonnet Internals M3 3A Sanitary Internals M5 Stainless Steel Stem M6 Cast Iron Compressor M7 Bronze Compressor M8 PVDF Coated Cast Iron Compressor M9 Stainless Steel Bushing M0 Stainless Steel Tube Nut M7 PPS Cap M8 Heat Shrink Tubing on Handwheel Optional Body/Bonnet Bolting B8 Stainless Steel ASTM A93 B8 BLTS MNT HDR, Except STDS, Supplied w/o Body BSpec Special Bonnet Flange Bolting MET Metric Bonnet Flange Fasteners Yoke Code Y Description Yoke Supplied Locking Device LD Locking Device Extended Stem EXTSTEM Extended Stem EXTSTEMR Extended Stem from Valve CL to Top of Rim EXTSTEMC Extended Stem from Valve CL to Indicator Cap LCAP Stem Ext. from Center of Valve to Top of Cap LRIM Stem Ext from Center of Valve to Top of Rim Figure Number: -F-428L TME-3- Manual Bonnets & Accessories Configuration Example 3 Manual Bonnets Actuated Bonnets eep Holes Electropolish Topworks Optional Coatings Bonnet Seal Materials Optional Bonnet Internals Optional Body/Bonnet Bolting Yoke Locking Device Extended Stem Multiple selections allowed Page 6

7 Actuator Options Advantage Actuators Fail Open A03 Bio-Tek A A , 0.75 or.0 A6.5 or 2.0 A33 3 or 4 A47 3 or 4 Fail Close A203 Bio-Tek with 60# Spring A204 Bio-Tek with 90# Spring A with 60# Spring A with 90# Spring A , 0.75 or.0 with 60# Spring A or.0 with 90# Spring A26.5 or 2.0 with 60# Spring A27.5 or 2.0 with 90# Spring A233 3 or 4 with 60# Spring A234 3 or 4 with 90# Spring A247 3 or 4 with 60# Spring A248 3 or 4 with 80# Spring Double Acting A303 Bio-Tek A A , 0.75 or.0 A36.5 or 2.0 A333 3 or 4 A347 3 or 4 Advantage 2.0 Actuators Fail Open B03 Bio-Tek B B , 0.75 or.0 B6.5 or 2.0 Fail Close B203 Bio-Tek with 60# Spring B204 Bio-Tek with 90# Spring B with 60# Spring B with 90# Spring B , 0.75 or.0 with 60# Spring B or.0 with 90# Spring B26.5 or 2.0 with 60# Spring B27.5 or 2.0 with 90# Spring Double Acting B303 Bio-Tek B B , 0.75 or.0 B36.5 or 2.0 Advantage Excel (AXS) Actuators AXS Fail Open AXS26 Fail Close with 60# Spring AXS29 Fail Close with 90# Spring AXS3 Double Acting AXSS Fail Open (Sealed Bonnet) AXS26S Fail Close with 60# Spring (Sealed Bonnet) AXS29S Fail Close with 90# Spring (Sealed Bonnet) AXS3S Double Acting (Sealed Bonnet) APA Advantage Piston Actuators APBT6 Bio-Tek with 60# spring APBT9 Bio-Tek with 90# spring AP with 60# spring AP with 90# spring AP with 60# spring AP with 90# spring AP006.0 with 60# spring AP009.0 with 90# spring AP506.5 with 60# spring AP509.5 with 90# spring AP with 60# spring AP with 90# spring Dia-Flo Actuators Fail Open 32 #2 325 # #25 for Vacuum Service 350 #50 30 #0 330 # #250 Fail Close Size # Spring & 89 Springs & Raymond Springs Spring Size # Spring & 02A Springs A Spring Dia-Flo Actuators (cont.) Fail Close Size # Spring & 02A Springs Spring Spring & 97 Springs A Spring Size # Spring & 97 Springs & 98 Springs & 98 Springs , 97 & 98 Springs Size # Spring Spring & 97 Springs & 98 Springs & 98 Springs , 97, & 98 Springs Spring Spring Double Acting Size # Spring Spring Spring & 97 Springs & 98 Springs & 98 Springs , 97, & 98 Springs Spring Size # & 30 Springs Spring Spring 332 #2 Double Acting 3325 #25 Double Acting 3350 #50 Double Acting 3375 #75 Double Acting 330 #0 Double Acting 3330 #30 Double Acting #250 Double Acting Non ITT Actuation POF Customer Supplied Actuator POM ith Non-ITT Actuator Figure Number: -F-428L TME-B209- Actuator Options Configuration Example Actuator Options (select ): Advantage Actuator Advantage 2.0 Actuator Advantage Excel Actuator APA Actuator Dia-Flo Actuator Non ITT Actuation B209 B209 Page 7

8 Switches and Actuator Accessories Switch Package SP-2 SP2S Silver Contacts - Mechanical SP2SEU Silver De-Rate to 70VDC/48VAC Max for EU Service - Mechanical SP2G Gold Contacts - Mechanical SP2GEU Gold De-Rated to 70VDC/48VAC Max for EU Service - Mechanical SP2Z 2-ire Proximity SP2N NAMUR Proximity SP2P 3-ire PNP Proximity SP2NP 3 ire NPN Proximity SP2B Effector IS-2002-AROA Proximity Switch Package SP-3 SP3S48 Silver Contacts 48V - Mechanical SP3S48CL Silver Contacts 48V w/ Clipped Resistor - Mechanical SP3S0 Silver Contacts 0V - Mechanical SP3S0CL Silver Contacts 0V w/ Clipped Resistor - Mechanical SP3S240 Silver Contacts 230V - Mechanical SP3S240CL Silver Contacts 230V w/ Clipped Resistor - Mechanical SP3G30 Gold Contacts 30V - Mechanical SP3G30CL Gold Contacts 30V w/ Clipped Resistor - Mechanical SP3GSA SP3Z SP3N SP3P SP3NP Gold Contacts 30V, Simple Apparatus - No LEDS - Mechanical 2-ire Proximity NAMUR Proximity 3-ire PNP Proximity 3 ire NPN Proximity Value Switch Package VSPG30 Gold Contacts 30V VSPN NAMUR Proximity VSPP 3-ire PNP Proximity VSPS48 Silver Contacts 48V VSPZ 2-ire Proximity Actuator Accessories Position Indicator (Dia-Flo Only) P Position Indicator Limit Switches LS Microswitch BZE6-2RN LS2 Microswitch BAF - 2RN LS3 Microswitch DTE6-2RN LS4 Microswitch DTF2-2RN LS5 Microswitch EXQ LS6 Microswitch EXDQ LS7 Microswitch LSAA LS8 estlock 3479 Model 3 LS9 GO A LS9C GO A2 LS estlock E3479 MOD3 LS3 estlock 9880 LS4 estlock E9880 LS5 estlock AB LS6 estlock BI LS7 estlock EI LS4 Efector IN07 LS42 Efector IN533 LS78 StoneL PM33SO2RS LS79 StoneL PM33SO2RL LS28 estlock 99P2A00000 LS29 estlock 99P2AD550 LS40 estlock 99P22G00000 LSSpec Special Limit Switches, Yoke Mounted LSY Microswitch BZE6-2RN LS2Y Microswitch BAF - 2RN LS3Y Microswitch DTE6-2RN LS4Y Microswitch DTF2-2RN LS5Y Microswitch EXQ LS6Y Microswitch EXDQ LS7Y Microswitch LSAA LS8Y estlock 3479 Model 3 LS9Y GO A LS0Y Namco EA LS2Y Namco EA /3500 LSSpecY Special Mechanical Accessories AO Adjustable Opening Stop AOH Adjustable Opening Stop w/ Handwheel AHODUP Special Adjustable Opening Stop w/ Handwheel for Dupont ATS Adjustable Travel Stop HC Hand heel Closing Device HO Hand heel Opening Device JO Jack Opening Device (#32250) THC Adjustable Travel Stop, Handwheel Closing Device TO Adjustable Travel Stop, Adjustable Opening Stop TOHC Adjustable Travel Stop, Adjustable Opening Device, Handwheel Closing Device TOHO Adjustable Travel Stop, Adjustable Opening Stop, Handwheel Opening Device Mechanical Accessories TOO Adjustable Travel Stop, Adjustable Opening Device, rench Opening Device O rench Opening Device XAO Adjustable Opening Stop Sealed with Indicator XAOL Adjustable Opening Stop with Switch Mount XOB Adjustable Opening Stop - Bolt Assembly Manual Bonnet Switch MBSMG Mechanical Gold (Close only) MBSMS Mechanical Silver (Close only) Actuator Hardware Options H SS Airmotor Bolts H2 SS Accessory Brackets H3 SS Tubing and Fittings H4 Plastic Tubing /Brass Fittings H5 PVC Coated Tubing /Brass Fittings H6 PVC Coated Tubing /SS Fittings H9 PTFE Tubing and Stainless Steel Fittings H0 Breather Vent Filter Stainless Steel H Breather Vent Filter BRS H2 Nylon Actuator Vent Plug Solenoid Valve SV Asco 8320G84 SV2 Asco EF8320G84 SV3 Asco 8345G SV4 Asco EF8345G SV7 Asco 8302G202 SV8 Asco EF8320G202 SV4 Burkert Series 602 SV5 Burkert Series 604 Solenoid Voltage V 20V / 60HZ V2 24VDC V3 240V / 60HZ VSpec Special Adjustable Opening Stop XAO Adjustable Opening Stop Sealed with Indicator XAOL Adjustable Opening Stop with Switch Mount XOB Adjustable Opening Stop - Bolt Assembly Page 8

9 Switches and Actuator Accessories (cont.) Speed Controllers Transducer SC Schrader TR Conoflow GT208ED SC2 hitey needle valve SS-RMA TR630 Conoflow GT608ED SCSpec Special TRIPH Moore IPH/4-20MA/3-5PSIG/20PSI/FR/DNS TRS atson Smith S XR Filter Regulators TRSpec Special FR Conoflow GFH60XTKEG3G Positioners FRX2 Two Conoflow GFH60XT- KEG3G PR Conoflow Model 3 FR2 Fisher 67FR PR2 Conoflow Model 33 FR2X2 Two Fisher 67FR PR3 Moore 73NF FRSpec Special PR4 Moore 73 NB PR5 Moore 73 NR PR6 Conoflow P50 PR7 Conoflow P5 PR8 Conoflow P52 PRSpec Special Signal Ranges SR 3-5 PSI SR PSI SR3 3-9 PSI SR4 9-5 PSI Junction Box JB Junction Box: Standard JBSpec Special Figure Number: -F-428L TME-B209-VSPS48- Switches and Actuator Accessories Configuration Example VSPS48 Switch Packages (select ): SP2 SP3 VSP Limit Switches - Special Mechanical Accessories Manual Bonnet Switch Actuator Hardware Options Solenoid Valve Solenoid Voltage Speed Controllers Filter Regulators Transducer Positioners Signal Range Junction Box VSPS48 Page 9

10 Service Preparation and Quality Documents Special Service Preparation BAG Cleaned and Bagged DS Dual Scale (PSI/BAR) Gauges EU_SERVICE European Union Service NPC No Polishing Compound OXY Oxygen SIFREE Silicone Free Preparation SPEC Customer Special TOB Tobacco VAC Vacuum Special Quality Documents SQD2 C of C (seat & shell pressures) SQD3 C of C Profilometer Tape for each body SQD5 C of C Body/Stud/Nut CMTR and C of C to ASME Section VIII SQD6 C of C Tube CMTR, Tank Bottom Valve SQD7 C of C eld Rod CMTR, Tank Bottom Valve Figure Number: -F-428L TME-36-M7-A209-VSPS48-SQD3 Configuration Example Special Service Preparation Special Quality Documents SQD3 SQD3 Page 0

11 Obsolete Figure Codes Body Type RTBV Radial Tank Bottom Valve 8D Bio-Tek Forged.4435 SS FD Forged.4435 SS Body Ends (Buttweld) 423X 8 GA BT, Max Cutback, STD Length 423XL 8 GA BT, Max Cutback, Non-STD LG. 428X 6 GA Max Cut Standard Length 428XL 6 GA Max Cut Nonstandard Length 429X 4 GA Max Cut Standard Length 433 ANSI Flanged 489 RTBV, 90 Degree 6 GA Butt eld 490 RTBV, 90 Degree Tri-Clamp Second End Code (Clamp) X23X 8 GA BT, Max Cutback STD Length X23XL 8 GA BT, Max Cutback Non- STD LG X28X 6 GA BT, Max Cutback STD Length X28L By 6 Gauge Extended Tangent B X28XL 6 GA BT, Max Cutback Non- STD LG X29L By 4 Guage Extended Tangent B XX29X 4 GA BT, Max Cutback STD Length Bonnets, Handwheel 6 Standard Bio-Tek Bonnet 7 Sealed Bio-Tek Bonnet 902 Cast Iron Indicating 902S Cast Iron Indicating - Sealed 92 Stainless Steel (36) Indicating 92S Stainless Steel (36) Indicating - Sealed 932 Bronze Indicating 932S Bronze Indicating - Sealed 933 Bronze Indicating with Travel Stop (/2-4 ) 933S Bronze Indicating with Travel Stop - Sealed (/2-4 ) 942 Double Iron Indicating 942S Double IronIndicating - Sealed 943 Double Iron Indicating with 943S Travel Stop Double Iron Indicating with Travel Stop - Sealed 950 Rising Handwheel with Travel Stop 96 Plastic PAS Non-Indicating with Travel Stop FI Hot Lockout Bonnet LBA 5VAC/60HZ LBD 24VDC LBD 24VDC with Position feedback LBM 24VDC with Mech Switch Output LBP 24VDC with Solid State Switch Output Actuated Bonnets (Bronze) 33 Actuated 33S Actuated - Sealed Optional Bonnet Internals M2 Sanitary Internals M 36 Stainless Steel Stem M2 PSU Cap M3 Stainless Steel Compressor (Bio-Tek) M4 Clear Cap Diaphragms A Soft Natural Rubber (FDA) 6 EPDM Compound 6 (FDA) B6 Biotek EPDM Compound 6 C Hypalon H EPDM (FDA) NB NB R2 PTFE (FDA) TM PTFE (FDA)/Grade 6 BC TFM700 TFM700 PTFE (FDA) B hite Butyl (FDA) 7 EPDM Compound 7 (FDA) 7HP EPDM Compound 7 (FDA) B7 Bio-Tek EPDM Compound 7 TM7 PTFE (FDA)/Grade 7 BC TM7E PTFE (FDA)/Grade 7E BC Adv. Switch Pack SP-2.5 SP5B Effector IS-2002-AROA Proximity SP5G Gold Contacts - Mechanical SP5GEU Gold De-Rated to 70VDC/48VAC Max for EU Service - Mechanical SP5N NAMUR Proximity SP5NP 3 ire NPN Proximity SP5P 3-ire PNP Proximity SP5S Silver Contacts - Mechanical SP5SEU Silver De-Rated to 70VDC/ 48VAC Max for EU Service - Mechanical SP5Z 2-ire Proximity Solenoid Valve SV5 Burkert 300-C-/6 -F-R-/8- VOL (Advantage) SV6 Burkert 3-C-5/64 -F-BR-/8- VOL (Advantage) Special Service Preparation CS Controlled Sulfur Body ( %) SQDB CMTR (Body) SQD CMTR (body, tube, weld, weld rod) SQDBIO C of C Diaphragm USP XXVIII Class VI Biological Reactivity Page

12 Sterile Access and GMP Fabrications Fabrication Type GMP GMP HSA Horizontal Sterile Access SA Sterile Access SPEC Special Purge Location P Purge located closest to main valve end P2 Purge located closest to main valve end 2 PB Purge located at both valve ends (P and P2) Purge Valve Orientation B Back F Front L Left LL Left Special LR Left/Right Special R Right RL Right/Left Special RR Right Special Valve Number for Fabrication M Main Valve 2 Second Valve 3 Third Valve 4 Fourth Valve 5 Fifth Valve 6 Sixth Valve 7 Seventh Valve 8 Eighth Valve 9 Ninth Valve 0 Tenth Valve Note: See pages 4-0 for additional figure numbers. Sterile Access Example Sterile Access single valve fabrication with a.5 forged stainless steel main valve and a 0.5 forged purge tube closest to the second end. The main valve has buttweld ends, 25 Ra polished interior, a 963 PAS manual bonnet and a modified PTFE diaphragm. The purge tube has a tri-clamp end. Single Valve Fabrication Figure Number: SA-.5-F-428L-.5-X9-P TME-963 Single Valve Fabrication Configuration Example SA.5 F 428L.5 X9 P TME 963 Fabrication Type SA Valve Size.5 Body Type F Body End Code 428L Second End Code Purge Tube Size.5 Purge Tube End Code X9 Purge Location P2 Polish Selections (pg 5) Diaphragm Selection (pg 5) TME Bonnets & Bonnet Options (pg 6) 963 Actuator Options (pg 7) Switches & Actuator Accessories (pg 8-9) Service Preparation & Quality Doc. (pg 0) Sterile Access Orientations Page 2

13 Sterile Access and GMP Fabrications (cont.) GMP Example GMP two valve fabrication with a 2 forged stainless steel main valve and a 0.5 forged purge valve closest to the second end and facing to the right. The main valve has Tri-Clamp ends, 25 Ra polished interior, a reverse acting advantage 2.0 actuator with a 60lb spring, an SP-2 switch pack with silver mechanical contacts and a modified PTFE diaphragm. The secondary valve has 6 gauge ends, 25-inch polished interior, a PAS hand-wheel operated bonnet with sanitary internals and a modified PTFE diaphragm. Fabrication Figure Number: GMP Fabrication Configuration Example GMP Fabrication Type Two Valve Fabrication 2 Main Valve Size 2 Second Valve Size.5 Main Valve Figure Number: GMP-M-2-F-49-P2-R TME-B26-SP2S Main Valve Configuration Example GMP M 2 F 49 P2 R TME B26 SP2S Fabrication Type Valve Number M Valve Size 2 Body Type F Body End Code 49 Second End Code Purge Location P2 Purge Valve Orientation R Tube Extensions Polish Selections (pg 5) Diaphragm Selection (pg 5) TME Bonnets & Bonnet Options (pg 6) Actuator Options (pg 7) B26 Switches & Actuator Accessories (pg 8-9) SP2S Service Preparation & Quality Doc. (pg 0) Second Valve Figure Number: GMP-2-.5-F-428L-R TME-963 Second Valve Configuration Example GMP 2.5 F 428L R TME 963 Fabrication Type Valve Number 2 Valve Size.5 Body Type F Body End Code 428L Purge Valve Orientation R Tube Extensions Polish Selections (pg 5) Diaphragm Selection (pg 5) TME Bonnets & Bonnet Options (pg 6) 933 Actuator Options (pg 7) Switches & Actuator Accessories (pg 8-9) Service Preparation & Quality Doc. (pg 0) Page 3

14 Sterile Access and GMP Fabrications (cont.) GMP Orientations Page 4

15 Zero Static Fabrications Fabrication Type EZSBHV Zero static E-Series U-Bend: Horizontal Tube - Vertical Valve EZSBVV Zero static E-Series U-Bend: Vertical Tube - Vertical Valve ZDI Zero static Dual Inline ZDP Zero static Downstream Purge ZID Zero static Inverted with Drain ZSBBT Zero static Block Body Tee ZSBT Zero static Tee (Non-Faceted) ZSBBT-BO Zero static Block Body Tee with Back Outlet Option ZSBBHV Zero static Block Body U- Bend: Horizontal Tube - Vertical Valve ZSBBVV Zero static Block Body U- Bend: Vertical Tube - Vertical Valve ZSBBS Zero static Back to Back Sample Valve Fabrication Type (cont.) ZSBV Zero static Block Body with Vertical Run ZSHH Zero static Horizontal Tube - Horizontal Valve ZSVH Zero static Vertical Tube - Horizontal Valve ZUD Zero static with Upstream Sample and Downstream Purge Body Type SVBT Sample Valve Bio-Tek SVPF Sample Valve Pure-Flo Sample Valve Outlet Side R Ported on Right Side of Valve (Standard) L Ported on Left Side of Valve U Bend Tube Orientation (Optional) HV Horizontal U-Bend Tube with Vertical Valve Orientation EHV E-Series Horizontal U-Bend, Vertical Valve VV Vertical U-Bend Tube with Vertical Valve Orientation EVV E-Series Vertical U-Bend, Vertical Valve USPEC Special U-Bend Orientation Sample Valve Connection 49R.75 Tri-Clamp Note: See pages 4-0 for additional figure numbers. Zero Static - Forged Bodies Example Zerostatic with forged triclamp main valve and.5 buttweld tube. Interior finish: 20 Ra, interior and exterior electropolish. PTFE diaphragm with EPDM backing cushion. PAS handwheel operated bonnet. Purge valve oriented on right side. Valve Figure Number: ZSHH--F X28-R TME-963 Main Valve Configuration Example ZSHH F 49.5 X28 R TME 963 Fabrication Type Valve Size Body Type F Body End Code 49 Zerostatic Tube Size.5 Zerostatic Tube End Code X28 Zerostatic Tube Second End Code Purge Valve Orientation R Polish Selections (pg 5) Diaphragm Selection (pg 5) TME Bonnets & Bonnet Options (pg 6) 963 Page 5

16 Zero Static Back to Back Sample (ZSBBS) Zero Static Block Body with a 2 wrought stainless steel main valve and a 4 tube, all three outlets are buttweld, Bio-Tek sample valve with.75 Tri-Clamp connection, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: ZSBBS SVBT-49R-R Valve Body Configuration Example ZSBBS SVBT 49R R 6--0 Block Type ZSBBS Valve Size 2 Body End Connection (P3) 428 Zerostatic Tube Size 4 U-Bend Tube Orientation Zerostatic Tube End Connections (P,P2) 428 Second Valve Size.5 Second Valve Type (.5 only) 2 SVBT Second Valve End Connection (P4) 3 49 Sample Outlet Side R Body Material Polish Selections 6--0 For a U-Bend Vertical Tube, enter VV. For Horizontal Tube, enter HV. See drawings below for vertical tube and horizontal tube examples. 2 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT). PF is recommended for steam applications. 3 49R refers to.75 x.5 reducing Tri-Clamp port connection required for drainability..5 sample port is available upon request. Main Multiport Valve Topworks Figure Number:.75-N-TME-963 Topworks Configuration Example.75 N TME 963 Valve Size.75 Body (Not Supplied) N Diaphragm (pg 5) TME Bonnet (pg 6) 963 Options (pg 7-9) VV HV Sample Multiport Valve Topworks Figure Number:.5-N-TM7-8 Topworks Configuration Example.5 N TME 8 Valve Size.5 Body (Not Supplied) N Diaphragm (pg 5) TME Bonnet (pg 6) 8 Options (pg 7-9) P P2 P3 P4 Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 6

17 Zero Static Block Body Tee (ZSBBT) ZSBBT with a wrought stainless steel main valve with Tri-Clamp end connection and a 2 tube with buttweld ends, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: ZSBBT X Valve Body Configuration Example ZSBBT 49 2 X Block Type ZSBBT Valve Size Body Type Body End Connection 49 Zerostatic Tube Size 2 Zerostatic Tube End Connections X28 Zerostatic Tube Second End Connection Polish Selections 6--0 Non-Faceted Zero Static Tee (ZSBT) Non-Faceted ZSBT with a wrought stainless steel main valve with Tri-Clamp end connection and a 2 tube with buttweld ends, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: ZSBT X Valve Body Configuration Example ZSBT 49 2 X Block Type ZSBT Valve Size Body Type Body End Connection 49 Zerostatic Tube Size 2 Zerostatic Tube End Connections X28 Zerostatic Tube Second End Connection Polish Selections 6--0 P P2 P3 Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 7

18 Zero Static Block Body U-bend (ZSBBVV).5 Zero Static Block, wrought stainless steel, 2 U-bend vertical tube, all three outlets have tri-clamp ends, 25 Ra interior finish, standard exterior finish (Scotch Brite), both interior and exterior electropolish. Figure Number: ZSBBVV X Valve Body Configuration Example ZSBBVV X Block Type ZSBBVV Valve Size.5 Body Type 2 Connection (P) 49 Zerostatic Tube Size 2 Zerostatic Tube End Connection (P,P2 or P) X9 Zerostatic Tube Second End Connection (P2) 3 Polish Selections 6--3 ZSBBVV for vertical tube, vertical valve. ZSBBHV for horizontal tube, vertical valve. See drawings below for vertical tube and horizontal tube examples. 2 For Bio-Tek B is used. 3 Second end connection can be provided if end connections are different. E-Series Zero Static Block Body U-Bend (EZSBBVV) E-Series.5 Zero Static Block, wrought stainless steel, 2 U-bend vertical tube, all three outlets have tri-clamp ends, 25 Ra interior finish, standard exterior finish (Scotch Brite), both interior and exterior electropolish. Figure Number: EZSBVV X Valve Body Configuration Example EZSBVV X Block Type EZSBVV Valve Size.5 Body Type 2 Connection (P) 49 Zerostatic Tube Size 2 Zerostatic Tube End Connection (P,P2 or P) X9 Zerostatic Tube Second End Connection (P2) 3 Polish Selections 6--3 EZSBVV for vertical tube, vertical valve. EZSBHV for horizontal tube, vertical valve. See drawings below for vertical tube and horizontal tube examples. 2 For Bio-Tek B is used. 3 Second end connection can be provided if end connections are different. ZSBBVV P P2 ZSBBHV P3 Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 8

19 Zero Static Dual Inline 2 Zero Static Dual Inline, wrought stainless steel, U-bend vertical tube, 2 run, with 6 ga buttweld ends, Tri-clamp valve outlet end connection, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: ZDI VV Valve Body Configuration Example ZDI VV Block Type ZDI Valve Size 2 Body End Connection (P3) 49 Zerostatic Tube Size 2 U-Bend Orientation VV Zerostatic Tube End Connections (P2,P2) 428 Second Valve Size 2 Body Material Polish Selections 6--0 For a U-Bend Vertical Tube, enter VV. For Horizontal Tube, enter HV. See drawings below for vertical tube and horizontal tube examples. VV HV P P2 Second Valve Main Valve P3 Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 9

20 Zero Static Downstream Purge (ZDP) Zero Static Block Body, wrought stainless steel, U-bend vertical tube, main valve with Tri-Clamp end connection, 2 run with buttweld ends,.5 Pure-Flo purge with Tri-Clamp connection, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: ZDP VV SVPF-49-R Valve Body Configuration Example ZDP 49 2 VV SVPF 49 R 6--0 Block Type ZDP Valve Size Body End Connection 49 Zerostatic Tube Size 2 U-Bend Orientation VV Zerostatic Tube End Connection 428 Second Valve Size.5 Second Valve Type SVPF Second Valve End Connection 49 Second Valve Outlet Orientation R Body Material Polish Selections 6--0 For a U-Bend Vertical Tube, enter VV. For Horizontal Tube, enter HV. See drawings below for vertical tube and horizontal tube examples. VV HV Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 20

21 Zero Static Inverted with Drain (ZID) Inverted Zero Static with Drain, 2 Zero Static tube size, wrought stainless steel body, Tri-Clamp ends,.5 Bio-Tek Second Valve with Tri-Clamp outlet connection on right side of valve, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: ZID SVBT-49-R Valve Body Configuration Example ZID SVBT 49 R 6--0 Block Type ZID Main Valve Size Main Valve Type (.5 only) Main Valve End Connection 49 Zerostatic Tube Size 2 Zerostatic Tube End Connections 49 Second Valve Size.5 Second Valve Type (.5 only) SVBT Second Valve End Connection 49 Second Valve Outlet Orientation (opt.) R Body Material Polish Selections 6--0 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT). P3 P P4 P2 Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 2

22 Zero Static Block Body with Back Outlet Option (ZSBBT-BO) Zero Static Block with Back Outlet, wrought stainless steel, Tri-Clamp end connection, 2 cross tube (run) with buttweld ends, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: ZSBBT-BO X [DN50].50 [DN40].00 [DN25] 0.75 [DN20] 0.50 [DN5] Valve Body Configuration Example ZSBBT BO X Block Type ZSBBT Zero Static Option BO Valve Size 2 Material Body End Connection 49 Zerostatic Tube Size 4 Zerostatic Tube End Connection X29 Polish Selections 6--0 F F/2 A A/2 ØCross Tube E Ø Valve End J C Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 22

23 Zero Static Block Body with Vertical Run (ZSBV) ZSBV with a 2 wrought stainless steel main valve with Tri-Clamp end connection and a 2 tube with buttweld ends, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: ZSBV-R X Valve Body Configuration Example ZSBV R X Block Type ZSBV Left or Right Option R Valve Size 2 Body End Connection 428 Zerostatic Tube Size 2 Zerostatic Tube End Connection X28 Body Material Polish Selections 6--0 P2 P3 P Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 23

24 Zero Static with Upstream Sample and Downstream Purge (ZUD) ZUD wrought stainless steel body with 0.5 Bio-Tek Upstream Sample (right side) and 0.5 Pure-Flo Downstream Purge. Tri-Clamp main valve end connection. 2 Zero Static tube size with 6 ga buttweld ends. (Sample valve with 0.75 reducing ferrule and purge valve with 0.5 Tri-Clamp end connection.) 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: ZUD SVBT-49R-R-.5-TVBT Valve Body Configuration Example ZUD SVBT 49R R.5 TVPF Block Type ZUD Main Valve Size Main Valve End Connections (P3) 49 Zerostatic Tube Size 2 U-Bend Orientation Zerostatic Tube End Connections (P,P2) 428 Second Valve Size.5 Second Valve Type (.5 only) 2 SVBT Second Valve End Connection (P4) 3 49R Second Valve Outlet Orientation R Third Valve Size.5 Third Valve Type (.5 only) 2 TVPF Third Valve End Connection (P5) 49 Body Material Polish Selections 6--0 For a U-Bend Vertical Tube, enter VV. For Horizontal Tube, enter HV. See drawings below for vertical tube and horizontal tube examples. 2 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT). PF is recommended for steam applications..5 sample port is available upon request. 3 49R refers to.75 x.5 reducing Tri-Clamp port connection required for drainability. Note: All second and third valve options shown above are standard. VV HV Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 24

25 Multiport Valves Type of Valve BBD Block and Bleed BYP Pure-Flo Valve with Bypass Option CHRO Chromatography CHN Chromatography without Bypass CRO Cross over CROD Cross over with Drain Angle DIDO Double Inlet Double Outlet Diverter Valve DV2 Divert Valve 2-way DV2S Sterile Tank Vent Filter Shunt DV3 Divert Valve 3-way DV4 Divert Valve 4-way DV5 Divert Valve 5-way DV6 Divert Valve 6-way HDV3 Horizontal Divert Valve 3-way IDSA Integral Dual Sterile Access IHSA Integral Horizontal Sterile Access ISG Integral Sterile Access GMP SB Integral Sterile Barrier VSPEC Special Valve Type Type Code BT PF Description Bio-Tek Pure-Flo Outlet Option Outlet Configuration 2 Outlet Configuration 2 3 Outlet Configuration 3 4 Outlet Configuration 4 5 Outlet Configuration 5 6 Outlet Configuration 6 7 Outlet Configuration 7 8 Outlet Configuration 8 OSPEC Special Outlet Configuration Note: Refer to the drawing that corresponds to the type chosen Material rought 36L A rought AL6XN C2 rought C-22 C6 rought C-276 T rought Titanium BSPEC Special Material Flow Through (Optional) DVFT Divert Flow-Through Note: See pages 4-0 for additional figure numbers. Page 25

26 Block and Bleed Valve.5 Block and Bleed, wrought stainless steel, Tri-Clamp ends, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: BBD Valve Body Configuration Example BBD Block Type BBD Valve Size.5 Type (.5 only) Body End Connections (P, P2, P3) 2 49 Body Material Polish Selections 6--0 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT). 2 Contact the factory for additional options for discrete end connection selections. BBD P P2 P3 BBV P3 P P2 Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 26

27 Bypass Valve.5 wrought stainless steel valve with Bypass, Tri-Clamp ends, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: BYP Valve Body Configuration Example BYP Block Type BYP Valve Size.5 Body End Connections (P, P2) 49 Second Valve Size 2.25 Body Material Polish Selections 6--0 Available in.5-3 valve sizes. Note: Valve sizes.5 and larger are manufactured on a forged body. 2 /4 standard bypass valve size (internal passage diameter.8 ). Consult the factory for additional bypass valve sizes. P Main Valve Bypass P2 Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 27

28 Chromatography Valve (CHRO, CHN) 2 Chromatography Valve with Bypass, wrought stainless steel body, Tri-Clamp ends, standard mounting holes, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: CHRO SM-6--0 Main Valve Configuration Example CHRO 2 49 SM 6--0 Block Type CHRO Valve Size 2 Type (.5 only) 2 End Connections 49 Body Material Standard Mounting 3 SM Polish Selections 6--0 Chromatography block includes bypass valve as a standard (CHRO). Use Block Type CHN for Chromatography block with no bypass valve. 2 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT). 3 Standard mounting for Chromatography blocks consists of drilled and tapped holes on the bottom of the block. Contact factory for specific sizes and locations. Body can be mounted horizontally (as shown below) or vertically with port P at the top. CHRO P3 P Bypass P2 P4 CHN P2 P3 P P4 Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 28

29 Crossover Valve (CROD, CRO) Crossover with Drain Angle, wrought stainless steel, Tri-Clamp end connections, 25 Ra interior finish, standard exterior finish (Scotch Brite Figure Number: CROD Main Valve Configuration Example CROD Block Type CROD Valve Size Type (.5 only) Body End Connections (P-P4) 49 Body Material Polish Selections 6--0 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT). CROD P Instrument Connection P2 Instrument Connection P3 Line Connection Bypass P4 Line Connection CRO P Instrument Connection P2 Instrument Connection P3 Line Connection Bypass P4 Line Connection Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 29

30 Multiport Divert Valve (DV2, DV3, DV4, DV5, DV6) 2-ay 2-ay Divert Valve with a wrought stainless steel body, inlet and outlets have Tri-Clamp ends, outlet is Option 4, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: DV PP-49--SM-6--0 Valve Body Configuration Example DV PP 49 SM 6--0 Block Type DV2 Valve Size Type (.5 only) Outlet Option 2 4 Common Port Size 3 End Connections 4 49 Common Port End Connection (P) 5 Porting 6 PP Port Connection 7 49 Body Material Mounting Holes 8 SM Polish Selections ay Through 6-ay 3-ay Divert Valve with a.5 wrought stainless steel body, inlet and outlets have Tri-Clamp ends, outlet is Option 4, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: DV DVFT-49-X28--SM-6--0 Valve Body Configuration Example DV3 4.5 DVFT 49 X28 SM 6--0 Block Type 9 DV3 Valve Size Type (.5 only) Outlet Option 2 4 Common Port Size 3.5 Divert Valve Flow Through 0 DVFT End Connections 4 49 Common Port End Connection (P) 5 X28 Body Material Mounting Holes 8 SM Polish Selections 6--0 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT). 2 See page 3 for outlet options. 3 Common Port Size - provides the option of a larger common port (P) size than the valve size (to increase flow when more than one valve is open). 4 Contact the factory for discrete end connection selections. 5 Common Port End Connection - provides the option of a different end connection for the Common Port (P). 6 Porting (for the 2-way divert only) - out the bottom of the valve, typically for drain ports. Consult the factory for additional details. 7 Port Connection - is required if Porting is selected. Designates the port end connection(s). 8 Contact factory for standard or custom mounting options. 9 Figure numbers for Block Type: 3-ay - DV3, 4-ay - DV4, 5-ay - D5, 6-ay - DV6. Note: Combinations with more than six diverted ports are possible but are typically not recommended due to the internal deadleg. 0 Divert Valve Flow Through (3 through 6-ay only) - provides an additional common port from the opposite side of the block. Contact the factory for additional options. Page 30

31 Outlet Options 2-ay 3-ay Option Option 2 Option 3 Option 4 4-ay Option Option 2 Option 3 5-ay Option Option 2 Option 3 6-ay Option Option 2 Option 3 Page 3

32 Sterile Tank Vent Filter Shunt (DV2S) Sterile Tank Vent Filter Shunt with a.5 wrought stainless steel body, inlet and outlets have Tri-Clamp ends, outlet is Option 2, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: DV2S Valve Body Configuration Example DV2S Block Type DV2S Valve Size.5 Common Port Size (P) 2 End Connections 49 Body Material Polish Selections 6--0 Standard sizes:.5 and 2 2 Common Port Size option provides increased clamp size to connect directly to an available tank port. Valve Size:.5 and 2 Optional Common Port Size for.5: 2, 2.5, 3, 4 Optional Common Port Size for 2: 2.5, 3, 4 Consult the factory for non-jacketed versions available for use with electric heaters. DV2S -.5 valve size 2 REF 0-/2 REF Filter Connection Steam Port Connection (/2 Sanitary Clamp) One of Two Steam Transfer Tube Steam Jacket Drain /2 Sanitary Clamp Ftg. 2PL Condensate Drain Tank Connection -/2 Sanitary Clamp Ftg 4-/8 4-/8 -/2 2PL 5-3/4 -/2 3-/8 2 PL 7-5/ PL 2 PL 2-/4 -/4 REF -7/6 3/8 2 PL 3-/8 2-7/6 3 PL -3/4 3-/2 Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 32

33 Horizontal Divert Valve 3-ay (HDV3) 2 Horizontal Divert Valve 3-ay, wrought stainless steel body, butt weld end, common port (P) on the right (when facing the weir of the third valve), 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: HDV R Main Valve Configuration Example HDV SM 6--0 Block Type HDV3 Valve Size 2 Type (.5 only) Valve End Connections (P- P4) 2 49 Valve Orientation 3 Body Material SM Polish Selections 6--0 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT). 2 Contact the factory for discrete end connection options. 3 This determines which side (right or left) the Common Port (P) is on when viewing the top (See plan view below). P4 P2 P3 P Common Port (Right Orientation) P Common Port Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 33

34 Integral Dual Sterile Access (IDSA) 3 Integral Dual Sterile Access, wrought stainless steel, Tri-Clamp ends, 2 Second valve (P side) is oriented down, 2 Third valve (P2 side) is oriented down, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: IDSA Valve Body Configuration Example IDSA Block Type IDSA Main Valve Size 3 Main Valve End Connections (P, P2) 49 Second Valve Size 2 Second Valve Type (.5 only) Second Valve End Connection (P3) 2 Second Valve Orientation Third Valve Size 2 Third Valve Type (.5 only) Third Valve End Connection (P4) 2 Third Valve Orientation Body Material Polish Selections 6--0 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT). 2 Specify second (P3) and third (P4) end connections if they are differ from those for the main valve (P, P2). P P2 P3 P4 Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 34

35 Integral Horizontal Sterile Access (IHSA) Integral Horizontal Sterile Access valve with a wrought stainless steel body, all outlets have buttweld ends, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: IHSA Valve Body Configuration Example IHSA Block Type IHSA Valve Size Type (.5 only) End Connections (P, P2) 428 Second Valve Size Second Valve Type (.5 only) Second Valve End Connection (P3) 428 Body Material Polish Selections 6--0 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT) P3 P2 P Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 35

36 How to Order an ISG Integral Sterile Access and GMP valve with a.5 wrought stainless steel body, inlets and outlets on the main valve (P and P2) are sanitary clamp with a buttweld end, second valve is an end connection option 2, second valve is a.5 Pure-Flo, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: ISG SVPF-R Valve Body Configuration Example ISG SVPF R 6--0 Block Type ISG Valve Size (Main).5 Type (.5 only) Outlet Option 2 Second Valve Size.5 Second Valve Type (.5 only) SVPF Valve Orientation 2 R Body Material Polish Selections 6--0 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT) 2 Second valve ported on the left or right side of main valve weir. End Connection Options Right Left Page 36

37 How to Order a Sterile Barrier Integral Sterile Barrier, wrought stainless steel, Tri-Clamp end connections, 25 Ra interior finish, standard exterior finish (Scotch Brite). Figure Number: SB Valve Body Configuration Example SB Block Type SB Process Valve Size Type (.5 only) Body End Connections (P-P4) 2 49 Body Material Polish Selections 6--0 For.5 inch valve, must specify Pure-Flo (PF) or Bio-Tek (BT) 2 Second valve ported on the left or right side of main valve weir. P P2 P4 P3 Please contact the factory for the latest drawing and dimensional information. The above drawing should only be used as a general reference. Page 37

38 How to Order Topworks for Block Body Valves Manual Topworks manual bonnet (plastic PAS rising handwheel with travel stop) with no valve body, EPDM compound 7 (FDA) diaphragm, viton seal, PPS cap. Figure Number:.5-N S2-M7 Manual Bonnets & Accessories Configuration Example.5 N S2 M7 Valve Size.5 Body (Not Supplied) N Diaphragm 7 Manual Bonnets 963 eep Holes Electropolish Topworks Optional Coatings Bonnet Seal Materials S2 Optional Bonnet Internals M7 Optional Body/Bonnet Bolting Yoke Locking Device Extended Stem Multiple selections allowed Actuated Topworks.5 Advantage 2.0 Actuator (reverse acting # 8 with 90# spring) with stainless steel bonnet and no valve body, EPDM compound 7 (FDA) diaphragm, bronze compressor. Figure Number:.5-N-7-3-M7-B209 Actuated Bonnets & Accessories Configuration Example.5 N 7 3 M7 B209 Valve Size.5 Body (Not Supplied) N Diaphragm 7 Actuated Bonnets 3 eep Holes Electropolish Topworks Optional Coatings Bonnet Seal Materials M7 Optional Bonnet Internals Optional Body/Bonnet Bolting Yoke Locking Device Extended Stem Actuator Options B209 Multiple selections allowed Example of a complete figure number for block body valve and topworks: ISG SVPF-R N S2-M7.5-N-7-3-M7-B209 Page 38

39 Page 39

40 For more information, please contact: ITT Engineered Valves 33 Centerville Road Lancaster, PA USA Phone + (800) Phone + (77) Fax + (800) Pure-Flo Richards Street Kirkham, Lancashire PR4 2HU, England Phone Fax PFORD ITT Corporation Industrial Process Page 40