3SB 22mm Pilot Devices

Transcription

1 3B mm Pilot Devices Illuminated elector witches election AssembledLess Contacts Illuminated elector witch Operator with Holder Operator Descr Full AC/DC Transformer AC 8 6 Resistor AC/DC 3B-3MFA* 3B-3MFB* 3B-3MFO 3B-3MFD* 3B-3MF1-3B-3MT1* 3B-3MT- 3B-3MT' 3B-3MT6* B-3BR1' 3B-3BR> 3B-3RTT 3B-3RT' 3B-3RT* 3B-3RT6* 3B-3RRT 3B-3RR', 3B-3BFA* 3B-3BFB- 3B-3BFO 3B-3BFD* 3B-3BF1-3B-3RFA- 3B-3RFB* 3BQ-3RFO 3B-3RFD* 3B-3RF1-3B-3LFA- 3B-3LFB* 3B-3LFC* 3B-3LFD- 3B-3LF1-3B-3BT1* 3B-3BT* 3B-3BT- 3B-3BT6-3B-3LT1-3B-3LT- 3B-3LT- 3B-3LT6' 3B-3MR1* 3B-3MR- 3B-3LR1-3B-3LR-.. Color 3B-3MR Red Green White Amber Blue Clear 3B-3MR 3B-3MG 3B-3MW 3B-3MA 3B-3MB 3B-3MC 3B-3BR 3B-3BG 3B-3BW 3B-3BA 3B-3BB 3B-3BC 3B-3RR 3B-3RG 3B-3RW 3B-3RA 3B-3RB 3B-3RC 3B-3LR 3B-3LG 3B-3LW 3B-3LA 3B-3LB 3B-3LC Knob Operator Only Knob elector witch Color Red Yellow Green Blue Clear White 3B11 DC3 3B11-DD3 3B11-DE3 3B11-DF3 3B11-DH3 3B11-EC3 3B11-ED3 3B11-EE3 3B11-EF3 3B11-EH3 3B11-FC3 3B11-FD3 3B11-FE3 3B11-FF3 3B11-FH3 3B11-FG3 3B11 GC3 3B11 GD3 3B11 GE3 3B11 GF3 3B1D1 GH3 3B11 GG3 te: Operators are supplied with metal chrome front rings as standard. Operators and assembled devices may be ordered with plastic front rings at no additional charge. For 3B parts add suffix R For 3B1 parts change last two digits from 3 to 1. 5)Assembled units and operators with contact block holder with "" in the 5th position are supplied with 3 unit contact block holder; for 5 unit contact block holder change 5th digit from to. Add 1.5 to list price. To order replace the dot (" ") at the end of the catalog numbers, with the letter corresponding to the color desired. R- Red Knob G - Green Knob W-White Knob A - Amber Knob B- Blue Knob C-Clear Knob Discount chedule AC-1 (CMKT)

2 3B Pilot Devices General 3 mm = Pushbutton Cap = Front Ring = Pushbutton Operator = Contact Block Holder = Contact Blocks mm 1 Parts common to mm and 3 mm Pilot Devices. ^ z u II 3B pilot device components are designed to interchange parts between the mm and 3 mm for greater flexibility. The pilot devices are available as components and are easily assembled in the field. ome are partially assembled where contact blocks or lampholders can be added. The assembled units are ready for installation. mm Mounting The operator is inserted into the hole in the panel from the front and twisted into the contact block holder. The unit is then tightened from behind by means of two set screws which are located in the contact block holder, preventing the unit from getting loose or twisting. 3 mm Mounting The holder is an integral part of the actuator; it is inserted into the hole in the panel from the rear and secured from the front by means of a front ring. With the use of a legend plate or the thrust and trim washers the unit becomes stationary and will not twist or get loose. Applications Devices are heavy duty oiltight, watertight and dust-tight (NEMA Type 1, 3R,,, 1 and 13, IP66). They are used in industrial control circuits at 6 or less. Front Rings Units are supplied as standard with metal chrome plated front rings. Black plastic or anodized aluminum rings are optional at no additional cost. The plastic rings are recommended for use where the atmosphere may be corrosive. LED Indicating Lights Pilot devices are available with LED lights. ince LED's consume less power, their life is 1 to times that of conventional incandescent lamps. They also provide greater resistance to shock and vibration. Where lamp integrity and low maintenance is crucial the 3BO LED indicator is your best choice. Contact Blocks One line of contact blocks fits both mm and 3 mm devices, reducing required stock levels. All have parallel double break contacts with wiping action, and reliability nibs to insure long. maintenence-free operation. The design is also well suited to low energy circuits common on programmable controller interfaces. Blocks snap side-by-side on the holder and lock in place. The contact block holder is available in 3 and 5 position versions, eliminating the need for piggyback contacts which are hard to wire and prone to failure. Terminals meet the "touchsafe" requirements of I EC standards and are clearly marked. Wire funnels, screwdriver guides and captive terminal screws make the contacts easy to wire, while self-lifting spring washers insure that the wire stays put under severe vibration. pecial contact blocks are available for solder connection to printed circuit boards. When used with the special operator adaptor they present a unique solution to multiple button operator panels.

3 3B Pilot Devices mm & 3mm Accessories: s and s election s for (BA 9s) Bayonet Base T-3 Lamp tandard Depth Full 3B1-B hallow Depth Full 3B13-K hallow Depth Transformer (6 olt econdary) 3B1-5M tandard Depth Full AC/DC with Resistor Resistor Neon 3 Neon ;T Holder 5 Max.5W tandard Depth Tab Connector Full AC/DC tandard /3 AC. 13 3/AC, 13 3B1-F 3B1-G 3B1-H 3B1-J 3B1-K 3B1-B 3B1-L 3B1-D 3B1-E 3B1A 3B1-A 3B1-C 3B1-L hallow Depth Full AC/DC with Holder 3B13-F 3B13-G 3B13-H 3B13-J 3B13-K 3B13-A hallow Depth Transformer (GO mm) with / / / / 8/B 6/B 3B1-5M 3B1-5P 3B1-5A 3B1-5C 3B1-5U 3B1-5W 1. Deep Transformer 3B1-M Replacement s t Light s BA 9s 3BOA-BL1 Light Bi-Pin Deep Transformer (95 mm) with 3B1-M 3B1-P 3B1-A 3B1-C 3B1-U 3B1-W Incandescent AC/DC (BA 9s) 1755 #756 #757 #8 MB.5W #1MB Neon #fje51hr 11/13 5W LED s (BA 9s) AC Red AC Green AC Amber AC Blue AC White AC/DC Red AC/DC Green AC/DC Amber AC/DC Blue AC/DC White AC Red AC Green AC Amber AC Blue AC White A B C D E F G H J K L M Y Z 3BOA-BLA 3BOA-BLB 3BOA-BLC 3BOA-BLD 3BOA-BL1 3BOA-BLN BOA-L1R 3BOA-L1G 3BOA-L1A 3BOA-L1E 3BOA-L1W 3BOA-LCR 3BOA-LCG 3BOA-LCA 3BOA-LCE 3BOA-LCW 3BOA-LFR 3BOA-LFG 3BOA-LFA 3BOA-LFE 3BOA-LFW Incandescent s AC/DC (Bi-Pin) used with 3B-UKB only MH *" -a 3- Dual Input 3B1-P Dual Input s for Master Push to Test with AC AC 6 to DC Incd. & DC LED 61 AC/DC Incd. AC/DC LED AC Neon 3B1-M 3B1-N 3B1-P 3B1-Q II 3BOA-BBA Neon N R T 3BOA-BBA 3BOA-BBB 3BOA-BBD 3BOA-BBN LED (Bi-Pin) used with 3B-UKB only AC Yellow DC Green DC Yellow U w 3BOA-BBC 3B19-HN 3B19-GC o <_ o' r D bulb included. Used with joystick operator. Discount chedule AC-1 (CMKT)

4 3B Pilot Devices mm and 3mm Pushbutton Units and Indicator Lights Technical Technical Ratings Rated for! NO +. ND. NC for or using resistor with transformer Continuous Current witching Capacity Rated Operating U,. Continuous Current, Rated Operation Current witching Capacity Enclosure Ratings onic Converter Audible ignal Mechanical Life Pushbutton units Illuminated pushbutton units Rotary and latching actuators Contact Life Frequency Of Operation Ambient Temperature Range Conductor izes Mounting Position Incandescent Lamp Neon Lamp LED Grounding 6 AC max., above 3 AC same polar ty 6 AC max. For lamps with BA 9s base, max. 15;.5W For max. AC 1., /, 5/6Hz, 1A 1A IDA, heavy duty; NEMA A6/P6 DE 66 and IEC All contact blocks With screw terminals; AC 66 BA 9s 5 AC/DC.5W u, fe/ac-1 AC te/ac-15 DC te/dc-1 te/dc-13 IDA 6A 1A 1A 11/1 6A 8 8A A /3 6A A 1.A 38/ A 1A A IEC, IP66 NEMA1.3R.,, 1 and 13-8 DC, 5mA; minimum 8 db, normal 9 db; Distance 1 cm, frequency 3.kHz ± OOHz; audible temperature - to +8"C 1 million make-break operations 3 million make-break operations 3 thousand make-break operations 1 million make-break operations with contactor load 1 make-break operations per hour -5 to +6Q C -5 to + C (housing fitted with indicator lights or illuminated pushbutton units with incandescent lamps) ( #1-18 AWG (.5 to.5 mnr stranded or solid Any Clip-on for illuminated pushbutton units or indicator lights for BA 9s lamps 6, 1,, 8; W, ;.5W For operating voltages between and, use a resistor type unit AC11-/- AC, AC/DC, AC Master Lamp Test Push to Test and Wiring Applications Using Dual Input Modules afety requirements are met automatically when the actuators and lens assemblies are mounted on metal front plates. When mounting in nsulated housings, the "protective insulation" safety requirement is met. L1 (AC ) L+ (DC6...) UC6..., AC L+ ' iptest (DC) (AC) i [LO ad] DC (L+) _1 ^7 ^ D 1 (L-)DC [To» ad] DC (L+) 1_ E T 7 ^ 7 i C5 (L-)DC Lamp test button 3 3 -A \ L. 5 (L+) I b i. (L-) (1+1 1 (L-) Dual Input with Load Across Lamp For AC applications use 3B1-M for,.5w incandescent bulb (included). For 6 to DC applications, use 3B1-P for 6 to,.5w incandescent bulb or LED bulb (not included). Dual Input without Load Across Lamp For AC or DC applications, use 3B1-Q (bulb not included). te: When used with AC bulbs, illuminate at half intensity. Do not use with load across the lamp. Do not use with voltage reducer (resistor or capacitor) and transformer type.

5 3B Pilot Devices Contact Block Position for elector witches Technical Two Position elector witch Contact Block election Rear iew of witch witch Position (Front of witch) *» Three Position elector witch Contact Block election witch Position (Front of witch) «v t s> <* Circuit / NO Circuit / / / ND ND NO NC Block Position Block Position 1, AorA 3, BorB 1, AorA 3, B or B 1. Aor A 3, B orb 1. AorA 3, BorB 1. AorA 3, BorB B 3 1 A 3 or 5 Block Holder Contact Closed Contact Open Rear iew of witch B 3 A B 3 or 5 Block Holder 1 A Contact Closed Contact Open Both Plugs Inserted Contact Block Holder Contact Block Holder Picture denotes Position, both plugs inserted. Position A leaves left plug inserted. Position B leaves right plug inserted Positions, A and B cannot be used on illuminated selector switches. Position is occupied by full voltage or resistor lamp modules. ^Illuminated transformer type position selector switches have only one block position {1 or 3} available for contact block mounting. Illuminated transformer type 3 position selector switches have only three block positions available for contact block mounting when deep transformer is used. Two element contact block. O e si (A a. 517