Solenoid coils. Data sheet

Transcription

1 Data sheet Solenoid coils Danfoss solenoid valves and coils are usually ordered separately to allow maximum flexibility, enabling you to select a valve and coil combination to best suit your needs. The Danfoss coil program consists of both the easy-to-handle Clip-On system and traditional coils with threaded fastener. Danfoss offer a wide range of application specific coils for e.g. steam or hazardous areas. The coils are available with approvals such as EN , EEx/ATEX and U. Features y Encapsulated coils with long operating life, even under extreme conditions y Standard coils for AC or DC y Standard coils from 12 V 400 V, 50, 60 or 50 / 60 Hz y Coils can be fitted without use of tools y Coils can only be removed with use of tools y Standard coils available with: - Cable plugs - Industrial plugs - Terminal box - 3 core cable - Junction box - Conduit hub IC.PD.600.3A B8276 1

2 Coil identification is printed directly on the coil: Country of origin Coil type Spare part no. (code no.) Ambient temperature ( C = Ambient temperature range: -40 C 40 C) CE marking U recognized coil Raw coil number (F4501=Raw coil number 018F4501) 12 Point of contact MADE IN DENMARK BQ240CS Spare part no. 018F C V 60Hz 9.5W 16VA 230V 50Hz 10W 17VA F4501 Danfoss A/S, 6430 Nordborg, Denmark IC.PD.600.3A B8276 2

3 BA, High performance coils y Cable plug enclosure: - IP00 version with DIN A spade connectors - IP20 version with protective cap - IP65 version with cable plug y Nut and snap fastener included y In accordance with: - ow Directive 2014/35/EU BA024A %, 10% N7508 BA048A %, 10% N7510 BA115A %, 10% N7512 BA230A %, 6% N7501 BA240A %, 10% N7502 BA400A %, 6% N7504 BA024B %, 10% N7520 BA115B %, 10% N7522 BA220B %, 10% N7523 BA012D ±10% DC N7550 BA024D ±10% DC N7551 Design In accordance with VDE 0580 Spade connector in accordance with DIN form A IP00 with spade connector, IP20 with protective cap, IP65 with cable plug Duty rating Continuous Plug type Cable plug (042N0156) without cable plug with protective cap with cable plug BA [kg] IC.PD.600.3A B8276 3

4 BD, High performance coils y Cable plug enclosure: - IP00 version with DIN A spade connectors - IP20 version with protective cap - IP65 version with cable plug y Nut and snap fastener included y In accordance with: - ow Directive 2014/35/EU BD024A %, 10% N7597 BD230A %, 6% N7591 Design In accordance with VDE 0580 Spade connector in accordance with DIN form A IP00 with spade connector, IP20 with protective cap, IP65 with cable plug Duty rating Continuous Plug type Cable plug (042N0156) without cable plug with protective cap with cable plug BD [kg] IC.PD.600.3A B8276 4

5 BB, High performance coils - IP00 version with DIN A spade connectors - IP20 version with protective cap - IP65 version with mounted cable plug y In accordance with: - ow Directive 2014/35/EU BB024AS %, 10% F7358 BB115AS %, 10% F7361 BB230AS %, 10% F7351 BB240AS %, 10% F7352 BB440CS %, 10% %, 10% F7353 BB024BS %, 10% F7365 BB110CS BB230CS ±10% ±10% ±10% ±10% F F7363 BB012DS ±10% DC F7396 BB024DS ±10% DC F7397 Design In accordance with VDE 0580 Spade connector in accordance with DIN form A IP00 with spade connector, IP20 with protective cap, IP65 with cable plug Duty rating Continuous Plug type Cable plug (042N0156) without cable plug with protective cap with cable plug BB [kg] IC.PD.600.3A B8276 5

6 BE, High performance coils IP67 for moist environments with terminal box - ow Directive 2014/35/EU BE024AS %, 10% F6707 BE048AS %, 10% F6709 BE115AS %, 10% F6711 BE230AS %, 10% F6701 BE240AS %, 10% F6702 BE440CS %, 10% %, 10% F6703 BE024BS %, 10% F6715 BE115CS %, 10% %, 10% F6710 BE220BS %, 10% F6714 BE110CS ±10% ±10% F6730 BE230CS ±10% ±10% F6732 BE012DS ±10% DC F6756 BE024DS ±10% DC F6757 Design In accordance with VDE 0580 Terminal box IP67 Duty rating Continuous Plug type Terminal box with terminal box with 1m cable BE [kg] IC.PD.600.3A B8276 6

7 BF, High performance coils IP67 for moist environments with molded-in cable - ow Directive 2014/35/EU BF230AS %, 10% F6251 BF240AS %, 10% F6252 BF440CS %, 10% %, 10% F6253 BF024AS %, 10% F6257 BF115CS %, 10% %, 10% F6260 BF220BS %, 10% F6264 BF024BS %, 10% F6265 BF110CS BF230CS ±10% ±10% ±10% ±10% F F6282 Design In accordance with VDE m 3-core flying lead IP67 Duty rating Continuous with 1m cable BF [kg] IC.PD.600.3A B8276 7

8 BG, High performance coils IP67 for moist environments with terminal box - ow Directive 2014/35/EU BG024AS %, 10% F6807 BG110AS %, 10% F6811 BG230AS %, 10% F6801 BG240AS %, 10% F6802 BG400AS %, 10% F6803 BG024BS %, 10% F6815 BG110BS %, 10% F6813 BG220BS %, 10% F6814 BG012DS ±10% DC F6856 BG024DS ±10% DC F6857 Design In accordance with VDE 0580 Terminal box IP67 Duty rating Continuous Plug type Terminal box with terminal box BG [kg] 112 IC.PD.600.3A B8276 8

9 BN, High performance coils Hum-free y Hum-free IP67 for moist environments with flying lead - ow Directive 2014/35/EU BN230CS ±10% ±10% F7301 Design In accordance with VDE m 3-core flying lead IP67 Duty rating Continuous with 1m cable BN [kg] 112 IC.PD.600.3A B8276 9

10 BN, High performance coils Center boss - Center boss for mounting IP65 cable plug in accordance with DIN43650 form A (042N0156) - IP67 for moist environments with terminal box y Used with EV215B, EV225B, and EV245B up to 160 C low pressure steam and max. ambient temperature 40 C (see additional information in the respective solenoid valve data sheets) - ow Directive 2014/35/EU y Mounted with the solenoid valves EV210B, EV220B, EV215B and EV225B, the assembly is U recognized Approval BN024DS ±10% DC F6968 Design In accordance with VDE 0580 Cable plug in accordance with DIN43650 form A or terminal box IP65, IP67 Duty rating Continuous [kg] BN ø34 58 Danfoss IC.PD.600.3A B

11 BO, High performance coils y ATEX Zone 1 IP67 seal kit for moist environment included y Approved in accordance with - ATEX 2014/34/EU - Ex mb IIC T4 Gb - ITS 09 ATEX 16835X y Media temperature: Up to 90 C BO024C ±10% 50 / Z6595 BO110C ±10% 50 / Z6593 BO230C ±10% 50 / Z6592 BO240C ±10% 50 / Z6591 BO024D ±10% DC Z m 3 x 0.75 mm² flexible cord IP67 including seal kit Media temperature -40 C 90 C Duty rating Continuous Humidity 0 100% Pollution degree 3 (EN ) Impulse withstand 2.5 kv (EN ) Accessory Description Application Seal kit (included as standard) Wet environment (pollution degree 3) 018Z0090 : 0.60 kg IC.PD.600.3A B

12 BJ, High performance coils Junction box IP30 / NEMA 2 y For U listed valves (U 429 and CSA) y Ambient temperature: Up to 50 C / 122 F y Media temperature: Up to 185 C / 364 F steam Valve type EV220B 6-50 EV210B EV215B EV225B EV250B Power Wire length Coil type consumption tolerance [in.] [cm] BJ024CS ±10% / F4100 BJ120CS ±10% BJ240CS ±10% / F F4120 Design In accordance with U 429, cut in 49 VA Junction box Junction box NEMA 2 ~ IP12 30 Ambient temperature C / F 52mm (2 in.) 100mm (4 in.) Danfoss 18F mm (2 in.) lbs / 0.39 kg IC.PD.600.3A B

13 BX, High performance coils Conduit hub IP54 / NEMA 4 y For U listed valves (U 429 and CSA) y Ambient temperature: Up to 50 C / 122 F y Media temperature: Up to 185 C / 364 F steam Valve type EV220B 6-50 EV210B EV215B EV225B EV250B Coil type tolerance Power consumption Wire length [in.] [cm] BX024CS ±10% / F4102 BX024CS ±10% / F4103 BX024CS ±10% / F4104 BX120CS ±10% F4112 BX120CS ±10% / F4113 BX120CS ±10% F4114 BX120CS ±10% F4115 BX240CS ±10% F4122 BX240CS ±10% F4123 Design In accordance with U 429, cut in 49 VA Conduit hub Conduit hub NEMA 4 ~ IP54 Ambient temperature C / F 48mm (2 in.) 74mm (3 in.) 41mm (1 5 /8 in.) lbs / 0.33 kg IC.PD.600.3A B

14 BY, High performance coils Up to IP65 / NEMA 4 y For U recognised valves - ow Directive 2014/35/EU Approval BY024CS ±10% ±10% F7655 BY240CS ±10% ±10% F7658 BY120CS ±10% ±10% F7663 Design In accordance with VDE 0580 Spade connector in accordance with DIN form A Up to IP65 / NEMA 4 Plug type Cable plug (042N0156) without cable plug with protective cap with cable plug BY [kg] IC.PD.600.3A B

15 BQ, High performance coils Up to IP65 / NEMA 4 y Max. media temperature: 185 C steam y For U recognised valves - ow Directive 2014/35/EU Approval BQ024CS %, 10% %, 10% F4517 BQ120BS / %, 6% F4519 BQ240CS %, 6% / 240-6%, 6% F4511 Design In accordance with VDE 0580 Spade connector in accordance with DIN form A Up to IP65 / NEMA 4 Plug type Cable plug (042N0156) without cable plug with protective cap with cable plug BQ [kg] IC.PD.600.3A B

16 AM coil y Cable plug enclosure: - IP00 version with DIN A spade connectors - IP20 version with protective cap - IP65 version with cable plug - ow Directive 2014/35/EU AM024C AM110C AM230C AM240C ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% N N N N0841 AM012D ±10% DC N0848 AM024D ±10% DC N0843 Design In accordance with VDE 0580, cut in 22.5 VA AC coils only Duty rating Plug type Spade connector in accordance with DIN form A IP00 with spade connector, IP65 with cable plug Continuous Cable plug (042N0156) without cable plug with cable plug with protective cap AM [kg] IC.PD.600.3A B

17 AP, Compact U recognised coils y Cable plug enclosure: - IP00 version with DIN A spade connectors - IP20 version with protective cap - IP65 version with cable plug y For U recognised valves y Ambient temperature: Up to 50 C / 122 F - ow Directive 2014/35/EU [ C / F] Approval AP240C / ±10% ±10% N4291 AP120B AP024B / / ±10% N ±10% N4293 Design In accordance with VDE 0580 Spade connector in accordance with DIN form A IP00 with spade connector, IP65 / NEMA 2 with cable plug Duty rating Continuous Plug type Cable plug (042N0156) without cable plug [in] with cable plug [in] with protective cap [in] [kg / lbs] AP / IC.PD.600.3A B

18 Cable plug Up to IP65 y For use with Danfoss coils type A, AM, AS, AZ, BA, BB, BD, BN (Center boss), BQ, and BY y AC / DC all s up to 250 V y Approved in accordance with: - - CSA - VDE Cable plug size Description Suitable for coil types DIN 18 Cable plug according to DIN A PG 11 A, AM, AS, AZ, BA, BB, BD, BN (Center boss), BQ, BY 042N0156 GDM 2011 J (Grey) Design DIN A Cable gland PG 11 Poles 2 + PE Max. 250 V AC / DC Approvals, CSA, VDE Enclosure IP65 (IEC 60529) Max. operating current Contact resistance 16 A < 10m Ω Cable diameter Ø mm Wire cross section Max. 1.5 mm 2 Ambient temperature C / F Contacts: Terminal block: Materials Profiled gasket: Housing: CuSn (Tin plated) PA 6 GF NBR PA 6 GF ø ø kg / lbs IC.PD.600.3A B

19 Cable plug Up to IP65 y For use with Danfoss coils type A, AM, AS, AZ, BA, BB, BD, and BY y AC / DC all s up to 250 V y Approved in accordance with: CSA - RoHS 2011/65/EU - VD 2014/35/EU Cable plug size Description Suitable for coil types DIN 18 Cable plug with form A A, AM, AS, AZ, BA, BB, BD, BY 042N0178 Design EN Form A Cable gland PG 11 Poles 2 + PE Max. 250 V AC / DC Approvals CSA Enclosure IP65 Max. operating current 16 A Contact resistance < 4m Ω Cable diameter Ø6 8 / 8 10 mm Wire cross section Max. 1.5 mm 2 Ambient temperature C / F Contacts: Terminal block: Materials Profiled gasket: Housing: CuZn, Cu / Sn - plated PA 6 GF NBR PA 6 GF kg / lbs IC.PD.600.3A B

20 Industrial plug Up to IP65 y For use with Danfoss coils type AB and AC y AC / DC all s up to 250 V y Approved in accordance with: - - CSA Industrial plug size Description Suitable for coil types DIN 11 Cable plug for 6.3 x 0.8 mm spade connectors AB, AC 042N0139 GM 209 J (Black) Design DIN B Cable gland PG 9 Poles 2 + PE Max. 250 V AC / DC Approvals CSA Enclosure IP65 (IEC 60529) Max. operating current 16 A Contact resistance < 10m Ω Cable diameter Ø4.5 7 mm Wire cross section Max. 1.5 mm 2 Ambient temperature C / F Contacts: Terminal block: Materials Flat gasket: Housing: CuSn (Tin plated) PA 6 GF NBR PA 6 GF ø ø kg / lbs IC.PD.600.3A B

21 Cable plug (ED + Varistor) Up to IP65 y For use with Danfoss coils type AM, AK, A, AS, AZ, BA, BD, BB, and BY y 24 V AC / DC and 230 V AC version y DIN 18 y Approved in accordance with: CSA - RoHS 2011/65/EU - VD 2014/35/EU Cable plug size ED colour Built-in VDR 1 ) resistor [V AC] [V DC] Suitable for coil types DIN ±10% AM, A, AS, AZ, BA, BB, BD, BY Red Yes 042N0263 DIN ±10% AM, A, AS, AZ, BA, BB, BD, BY Red Yes 042N0265 1) Protects against peaks. Design EN A Max. 5 ma Approval CSA Enclosure IP65 (IEC 60529) Max. operating current 1.5 A clamping contact Contact resistance 4m Ω Protection against wrong polarity Yes Cable diameter 6 8 mm and 8 10 mm Wire cross section Max. 1.5 mm 2 Ambient temperature C / F Contacts: Terminal block: Materials Flat gasket: Housing: Wire holder: CuZn, Cu / Sn-plated PA6 + 30% FG, black NBR ABS-free PA6 PA % FG P7,5 black kg / lbs IC.PD.600.3A B

22 Industrial plug (ED + Varistor) Up to IP65 y For use with Danfoss coils type AB and AC y 24 V AC y Approved in accordance with: CSA - RoHS 2011/65/EU - VD 2014/35/EU Industrial plug size Suitable for coil types Built-in VDR 1 ) resistor [V AC] [V DC] ED colour DIN AB, AC Red Yes 042N ) Protects against peaks. Design Industrial form ±10% Max. 5 ma Approval CSA Enclosure IP65 (IEC 60529) Max. operating current 1.5 A clamping contact Contact resistance 4m Ω Protection against wrong polarity Yes Cable diameter 5 6 mm and 6 9 mm Wire cross section Max. 1 mm 2 Ambient temperature C / F Contacts: Terminal block: Materials Flat gasket: Housing: Wire holder: CuZn, Cu/Sn-plated PA6 + 30% FG, black NBR ABS-fre PA6 PA % FG P7,5 black kg / lbs IC.PD.600.3A B

23 Universal electronic multi-timer ET 20 M y Outside adjustments y ight weight and small size y External adjustable timing from 1 minute to 45 minutes with 1 to 15 seconds drain open y One solid state timer fits all coil s from V AC y ight diodes for indication y All in one unit y Manual override (test button). Suitable for coil types BA024A A, AM, AS, AZ, BA, BD, BB 042N0185 ET 20 M V AC / Hz Power rating Max. 20 W Enclosure IP00, IP65 with cable plug Electrical connection DIN connector (DIN A) Ambient operating temperature range C Function Start with pulse Interval timer 0 45 min. On timer 0 15 sec. IC.PD.600.3A B