Motor Starter Protectors

Size: px
Start display at page:

Download "Motor Starter Protectors"

Transcription

1 Motor Starter Protectors Industrial Controls Product Catalog 09 Section contents Section Overview / - /3 Motor Starter Protectors 3RV0 MSP, Class 0/0 /4 - / Circuit Breakers 3RV7, 3RV8 Circuit Breaker UL 489 /6 Accessories Auxiliary Switches /7 Auxiliary Releases /7 Busbars /8 Mounting Accessories /9 - / Rotary Operating Mechanisms /3 Enclosures & Front Plates /3 3RV9 Infeed System /4 - /7 for Motor Starter Protectors Manual Motor Starter Ratings /8 Group Installation Ratings /9 Combination Motor Controller Ratings /0 3RV7 and 3RV8 Circuit Breaker Ratings / Export Application Ratings / - /3 Rules for Mounting /4 Technical Data / - /8 Overview of MSP Functions & Applications /9 Application as a Combination Motor Controller /30 Application in DC Switching /3 Design /3 Characteristics /3 Circuit Diagrams /3 Dimensions /33 - /34 for Accessories Mountable Accessories Overview /3 - /36 Circuit Diagrams /37 - /3 Dimensions /38 Busbar Accessories Overview /39 Dimensions /40 - /4 Operating Mechanisms Overview /4 Circuit Diagrams /43 Dimensions /43 - /44 Enclosures & Front Plates Overview /4 Dimensions /46 Spring Terminal Infeed System Design /47 Technical Data /47 Dimensions /48 Siemens Canada Limited Industrial Control Product Catalog 09 /

2 IEC Power Control Motor Starter Protectors contents 3RV motor starter protectors up to 00 A Size S00, S0 For motor protection CLASS 0 Selection and ordering data Size Rated Current Page S00 up to 6 A /4 S0 up to 40 A /4 S up to A / S3 up to 00 A / For motor protection CLASS 0 Selection and ordering data Size Rated Current Page S up to A / S3 up to 00 A / General data for motor starter protectors Page Technical data /8 Overview /8 Characteristics /3 Circuit diagrams /3 Dimension drawings /33 Circuit Breakers 3RV7, 3RV8 3RV9 infeed system 3RV MSP auxiliaries and accessories Page Selection and ordering data /6 Page Selection and ordering data /6-/7 Dimension drawings /34 Technical data /47 Overview /4-/ Dimension drawings /48 Selection and ordering data /7-/8 Page Technical data /7 Overview /3 Circuit diagrams /37 Dimension drawings /38 / Siemens Canada Limited Industrial Control Product Catalog 09

3 IEC Power Control Accessories contents 3RV busbar and accessories Accessories for motor starter protectors with Spring-Type terminals Mounting Accessories Page Selection and ordering data /8 Page Selection and ordering data /7 Page Selection and ordering data /9 -/ Overview /39 Technical data /40 Technical data /8 Overview /36 Technical data /38 Rotary operating mechanisms Enclosures and front plates Page Selection and ordering data /3 Technical data /8 Overview /4 Circuit diagrams /43 Dimension drawings /43 Page Selection and ordering data /3 Overview /4 Dimension drawings /46 Siemens Canada Limited Industrial Control Product Catalog 09 /3

4 For Motor Protection 3RV0 Class 0 up to 40A Description The 3RV0x MSPs are UL approved as Self Protected Combination Motor Controllers which are also called Type E. In this application, all the required functions for a motor branch are provided in one device: disconnect, short circuit protection, motor control and overload protection. A type E terminal adaptor is required. The 3RV0x MSPs are also approved for use as follows: Manual Motor Controller: Motor starter, motor disconnect, control and overload protection. Group Installation: Motor starter only, motor disconnect, control and overload protection. Tap conductor Protection in Group Installation acc. NEC: Motor starter only; motor disconnect, control and overload protection. When the 3RV0x is used with one of the 3 above mentioned approvals, the 3RV0x can be installed downstream of one circuit breaker or fuse set. For more detailed application information and rules how to apply, size and rate the 3RV0x in control panels in general, in group installations or in accordance to international IEC standards visit our website: Ordering Information E ON/OFF rotary handle with lockout and visible trip indication. E Adjustment dial for setting to motor FLA. E Class 0 overload trip characteristics. E Short circuit trip at 3 times the maximum setting of the FLA adjustment dial. E Short circuit current rating: E Ambient compensated up to 40 F (applies to side by side mounting). E Phase loss sensitivity. E Test trip function. E Terminal versions: screw, spring, ring lug. E Auxiliaries and Accessories see pages /7 /7. E General Information see pages /9 /3. E Technical Data see pages /8 /8. E Dimensions see page /33. Note: Select MSP by motor Full Load Amperes. Horsepower ratings are for reference only. Illustration FLA Adjustment Range [A] ) ) Single-Phase HP Ratings Three-Phase HP Ratings ) V 30V 00V 30V 460V 7V ¼ ¼ 3 ½ ¾ ½ ½ 3 3 ½ ½ ½ 0 6 ¼ 3 ½ ½ ¾ ½ ½ ½ ½ ¾ ½ ½ 7 ½ 7 ½ 7 ½ ½ ½ ½ ¾ ½ ½ 7 ½ 7 ½ ½ 7 ½ ½ ½ ¾ ½ ½ 7 ½ ½ 0 0 ½ ½ ¾ ½ ½ Instantaneous short circuit release [A] UL shortcircuit breaking 480V [ka] ) 4) Size S00 ) 4) Size S0 Order Number Order Number 3RV0-0AA 3RV0-0BA 3RV0-0CA 3RV0-0DA 3RV0-0EA 3RV0-0FA 3RV0-0GA 3RV0-0GA 3RV0-0HA 3RV0-0HA 3RV0-0JA 3RV0-0JA 3RV0-0KA 3RV0-0KA 3RV0-AA 3RV0-AA 3RV0-BA 3RV0-BA 3RV0-CA 3RV0-CA 3RV0-DA 3RV0-DA 3RV0-EA 3RV0-EA 3RV0-FA 3RV0-FA 3RV0-GA 3RV0-GA 3RV0-HA 3RV0-HA 3RV0-JA 3RV0-JA 3RV0-KA 3RV0-KA 3RV0-4AA 3RV0-4AA 3RV0-4BA 3RV0-4CA 3RV0-4DA 3RV0-4NA 3RV0-4EA 3RV0-4PA 3RV0-4FA 3RV03-KA ) 3RV03-4AA ) 3RV03-4BA ) 3RV03-4CA ) 3RV03-4DA ) Screw terminals, no auxiliary: = 0 Screw Terminals, with NO/NC Aux: = Spring terminals, no auxiliary: = 0 Spring Terminals, with NO/NC Aux: = Ring Lug Terminals, no Auxiliary: = 40 ) Select motor starter protector by motor full load amps. Horsepower ratings for reference only. ) The motor starter protectors rated up to 3 A can be used as manual motor controllers or as Type E combination motor controllers. For use as a Type E combination motor controller, a Type E terminal is required. See accessories page /0. 3) These products are NOT certified as Type E combination motor controllers. They can only be used as manual motor controllers. 4) 3RV MSPs can only be used with Innovations contactors and accessories ) Available only with = 0, or = 0 /4 Siemens Canada Limited Industrial Control Product Catalog 09

5 For Motor Protection 3RV0 Class 0 & 0 up to 00A Description The 3RV03 / 04 MSPs are UL approved as Self Protected Combination Motor Controllers which are also called Type E. In this application, all the required functions for a motor branch are provided in one device: disconnect, short circuit protection, motor control and overload protection. A type E terminal adaptor is required for all S frame 3RV03 above 4A and all S frame 3RV03 as well as for all S3 frame motor starter protectors. The 3RV03 / 04 MSPs are also approved for use as follows: Manual Motor Controller: Motor starter, motor disconnect, control and overload protection. Group Installation: Motor starter only, motor disconnect, control and overload protection. Tap conductor Protection in Group Installation acc. NEC: Motor starter only; motor disconnect, control and overload protection. When the 3RV03 / 04 is used with one of the 3 above mentioned approvals, they can be installed downstream of one circuit breaker or fuse set. For more detailed application information and rules how to apply, size and rate these MSPs in control panels in general, in group installations or in accordance to international IEC standards visit our website: Ordering Information E ON/OFF rotary handle with lockout and visible trip indication. E Adjustment dial for setting to motor FLA. E Class 0 overload trip characteristics. E Short circuit trip at 3 times the maximum setting of the FLA adjustment dial. E Short circuit current rating: E Ambient compensated up to 40 F (applies to side by side mounting). E Phase loss sensitivity. E Test trip function. E Auxiliaries and Accessories see pages /7 /7. E General Information see pages /9 /3. E Technical Data see pages /8 /8. E Dimensions see page /33. Note: Select MSP by motor Full Load Amperes. Horsepower ratings are for reference only. Illustration FLA Adjustment Range [A] Single Phase HP rating ) 3 Phase HP Rating ) V 40V 00V 30V 460V 7V Inst. Short- Circuit Release [A] UL AIC (480V) [ka] 6) Trip Class 0 Order Number 4) Trip Class 0 Order Number 4) 3RV03 Frame Size S RV03-4SA0 3RV03-4SB RV03-4TA0 3RV03-4TB RV03-4BA0 3RV03-4BB RV03-4DA0 3RV03-4DB RV03-4EA0 3RV03-4EB RV03-4PA0 3RV03-4PB RV03-4UA0 3RV03-4UB RV03-4VA0 3RV03-4VB RV03-4WA0 3RV03-4WB RV03-4XA0 3RV03-4XB RV03-4JA0 3RV03-4JB RV03-4KA0 3RV03-4KB RV03-4RA0 3RV03-4RB0 3RV04 Frame Size S A 3RV04-4FA0 3RV04-4FB A 3RV04-4HA0 3RV04-4HB A 3RV04-4JA0 3RV04-4JB A 3RV04-4KA0 3RV04-4KB A 3RV04-4RA0 3RV04-4RB ) 300A 3RV04-4YA0 3RV04-4YB ) 300A 3RV04-4MA0 3RV04-4MB0 ) Select motor starter protector by motor full load amps. Horsepower ratings for reference only. ) Size S and S3 are listed as type E combination motor controllers. For required Type E terminals see page /0. 3RV03 MSPs with a current setting limit of 4A or less do not require a type E terminal and fulfill the spacing requirements of UL08. 3) Shaded ratings apply for group installation only. These ratings do not apply as UL listed manual combination starters. 4) Pre-assembled motor starter protector and transverse auxiliary switch with NO + NC is available. Replace the last digit of the order no. with a. ) 3RV MSPs can only be used with 3RT contactors and accessories. 3RV MSPs can only be used with 3RT contactors and accessories. 6) For 00kA SCCR rated MSPs, change the part number from 3RV03 to 3RV03. (applies to S frame only through A). Refer to pages /8 to /0 when using an MSP in a Manual Motor Starter or a Manual Self-Protected Combination Motor Controller. Siemens Canada Limited Industrial Control Product Catalog 09 /

6 3RV Circuit Breakers UL 489 3RV up to 70 A Selection and ordering data Rated Current ) [A] Thermal overload release (non-adjustable) [A] Short Circuit breaking capacity [ka] 480 VAC 480Y/ 77VAC 600Y/ 347VAC For Motor Protection ) Instantaneous Over Current Release [A] Order Number (Screw Terminals) Weight [kg] For Transformer Protection 3) Instantaneous Over Current Release [A] Order Number (Screw Terminals) Innovations Frame Size S00 4) RV7-0AD RV8-0AD RV7-0BD RV8-0BD RV7-0CD RV8-0CD RV7-0DD RV8-0DD RV7-0ED RV8-0ED RV7-0FD RV8-0FD RV7-0GD RV8-0GD RV7-0HD RV8-0HD RV7-0JD RV8-0JD RV7-0KD RV8-0KD RV7-AD RV8-AD RV7-BD RV8-BD RV7-CD RV8-CD RV7-DD RV8-DD RV7-ED RV8-ED RV7-FD RV8-FD RV7-GD RV8-GD RV7-HD RV8-HD RV7-JD RV8-JD RV7-KD RV8-KD RV7-4AD RV8-4AD Innovations Frame Size S0 4) RV7-4BD RV8-4BD RV7-4CD RV8-4CD0 0.8 Innovations Frame Size S3 ) RV74-AD RV74-BD RV74-CD RV74-DD RV74-ED RV74-FD RV74-GD RV74-HD RV74-JD RV74-LD RV74-QD Weight [kg] ) 00 % rated value acc. to UL 489 and IEC (00 % rated breaker). ) Circuit breakers for system protection of motor and non-motor loads. Requires use of separate overload protection for motor applications. 3) Circuit breakers for system and transformer protection according to UL/CSA. Specially designed for transformers with high inrush current. 4) Transverse and lateral auxiliary switches can be ordered separately (see Mountable accessories ). ) Transverse auxiliary switches must not be mounted. Lateral auxiliary switches can be ordered separately (see Mountable accessories ). Refer to page / when using as upstream protection of a Manual Motor Controller or a Manual Motor Controller Suitable for Tap Conductor Protection in Group Installations. /6 Siemens Canada Limited Industrial Control Product Catalog 09

7 Accessories Auxiliaries and Accessories Selection and ordering data Type Version Width Fits 3RV Frame Size Innovations Screw Connection Order No. Auxiliary switches 3) mm Innovations 3RV90-E Transverse auxiliary switches CO NO + NC NO S00, S0, S, 3RV90-D S3 ), ) 3RV90-E ) 3RV90-F 3RV90-G 3RV90-A Solid-state compatible, transverse auxiliary switches for use in dusty atmosphere and in electronic circuits with low operating currents CO S00, S0, S, S3 3RV90-G Covering caps for transverse auxiliary switch slots (pack of 0) S00, S0, S, S3 3RV90-0H Signaling switch 4) 3RV9-M Lateral auxiliary switches (side mount) Width = 9 mm Signaling switch (side mount) Individual tripped and short-circuit signaling NO + NC NO NC NO + NC NO + NC each S00, S0, S, S3 8 S00, S0, S, S3 ), ) 3RV90-A ) 3RV90-B ) 3RV90-C 3RV90-J Innovations ), ) 3RV9-M Width = 8 mm Auxiliary releases ) 3RV90-AB4 Undervoltage releases (side mount) Width = 8 mm DC 4 V AC 0 Hz 4 V 0 V 30 V 400 V 4 V 00 V AC 60 Hz 0 V 08 V 40 V 440 V 480 V 600 V S00, S0, S, S3 Innovations 3RV90-AB4 S00, 3RV90-AB0 S0, S, 3RV90-AF0 S3 ), ) 3RV90-AM ), ) 3RV90-AP0 3RV90-AV0 3RV90-AV 3RV90-AS0 Undervoltage releases with leading auxiliary contacts NO (side mount) Width = 8 mm Shunt releases (side mount) Width = 8 mm 30 V 400 V 4 V 30 V 400 V 4 V 40 V 440 V 480 V 40 V 440 V 480 V AC 0/60 Hz 00% ON 6) AC 0/60 Hz sec ON 7) 0-4 V 0-70 V 90-0 V V 0-40 V V 30-4 V V 00 V 00 V S00, S0, S, S3 S00, S0, S, S3 S00, S0, S, S3 ) 3RV9-CP0 ) 3RV9-CV0 ), ) 3RV9-CV ) 3RV9-CP0 ) 3RV9-CV0 ), ) 3RV9-CV ), ) 3RV90-DB0 ), ) 3RV90-DF0 ) 3RV90-DP0 3RV90-DV0 3RV90-DS0 ) This product is also available with spring terminals. The order no. must be changed in the 8th position to a :e.g. 3RV90-E or 3RV90-E ) This product is also available with ring lug terminals. The order no. must be changed in the 8th position to a 4 : e.g. 3RV90-4E 3) Each motor starter protector can be fitted with one transverse and one lateral auxiliary switch. The lateral auxiliary switch NO + NC is used without transverse auxiliary switch. 4) One signaling switch can be mounted at the left of the motor starter protector. This accessory cannot be used on the 3RV7 and 3RV8 circuit breakers. ) One auxiliary release can be mounted at the right of each MSP. motor starter protector. 6) The response voltage at the lower limit of the voltage range at 0.8 (Tu=60 C) is valid for 00% (infinite) 7) The response voltage at the lower limit of the voltage range at 0.9 (Tu=60 C) applies for a duty cycle of seconds at AC 0/60 Hz and DC. Siemens Canada Limited Industrial Control Product Catalog 09 /7

8 Accessories Mounting accessories Selection and ordering data 3RV9 3-3C unit ) Not suitable for 3RV UL 489 circuit breakers. 3) Auxiliary trip units and lateral auxiliary switches cannot be used in combination. Modular spacing Number of motor starter protectors that can be connected Without lateral accessories Incl. lateral auxiliary switch With auxiliary trip unit Rated current I n at 690 V For motor starter protectors Size ) Not suitable for 3RV motor starter protectors with overload relay function. The 3RV9-DB connecting piece is available for connecting motor starter protectors from size S0 to size S00. Order No. Order quantity Weight approx. mm A kg Three-phase busbar systems for Classic and Innovations For feeding several motor starter protectors with screw terminals, mounted side-by-side on standard mounting rails, insulated, with touch protection. 3RV9 -AB S00, S0 )) 3RV9 -AB unit )) 3 S00, S0 3RV9 -BB unit )) S00, S0 3RV9 -CB unit )) S00, S0 3RV9 -DB unit 0.4 3RV9 -BB S00, S0 )) 3RV9 -AB unit )) 3 S00, S0 3RV9 -BB unit )) S00, S0 3RV9 -CB unit 0. )) S00, S0 3RV9 -DB unit RV9 -CB S00, S0 )) 3RV9-3AB unit S00, S0 )) 3RV9-3CB unit S3) 3RV9 3-A unit S3) 3RV9 3-B unit S3) 3RV9 3-C unit 0.9 3RV9 -DB S 3RV9 3-3A unit S 3RV9 3-3B unit S Version Modular spacing For motor starter protectors Size Order No. mm Connecting pieces for three-phase busbars For Innovations For connecting three-phase 4 S00, S0 3RV9 -DB busbars for motor starter 3RV9 -DB protectors of size S0 (left) to size S00 (right) Conductor cross-section, AWG cables, solid or stranded For 3RV MSP For 3RV MSP Tightening torque For motor starter protector size 3RV Innovations ) AWG AWG Nm Order No. Three-phase feeder terminals 3RV9 -AB Connection from top S00 3RV9-AB S0 3RV9-AB 3RV9-B Connection from below 3) 0 4 Input: 4, S00, S0 3RV9-B Output:.... 3RV93-A Connection from top S 3RV93-A Order quantity Weight approx. kg unit 0.04 Three-phase feeder terminals for constructing Type E Starters Innovations 3RV93-E Connection from top S00 3RV9-EB S0 3RV9-EB / S 3RV93-E ) Do not mix 3RV Classic Accessories with 3RV Innovations MSPs ) Do not mix 3RV Innovations Accessories with 3RV Classic MSPs 3) This terminal is connected in place of a switch, please take the space requirement into account. /8 Siemens Canada Limited Industrial Control Product Catalog 09

9 Accessories Mounting accessories Overview Accessories for "Self-Protected Combination Motor Controllers (Type E)" according to UL 08/UL The 3RV0 motor starter protectors with screw terminals are approved according to UL 08/UL as "Self-Protected Combination Motor Controllers (Type E)". This requires increased clearance and creepage distances ( inch and inches respectively) at the input side of the device, which are achieved by mounting a terminal block or a phase barrier. 3RV98-H terminal block 3RV938-K phase barrier Motor starter protectors/ circuit breakers -- No accessories needed Note: Size NSB0_0379c IC0_00408 Essential accessories for "Self-Protected Combination Motor Controllers (Type E)" according to UL 08/UL RV0., 3RV0. S00/S0 3RV98-H terminal block or 3RV98-K phase barrier 3RV03-4B., S -- 3RV03-4D.., 3RV03-4E., 3RV03-4P.., 3RV03-4S.., 3RV03-4T.., 3RV03-4U.., 3RV03-4V.. 3RV03-4J.., 3RV03-4K.., 3RV03-4R.., 3RV03-4W.., 3RV03-4X.., 3RV03 S 3RV938-K phase barrier 3RV04 S3 3RT946-4GA07 terminal block Special threephase infeed terminals are required for constructing Type E Starters with an insulated threephase busbar system (see page /8). The 3RV9 infeed system also enables the assembly of Type E Starters, see page /4 onwards. According to CSA, these terminal blocks and the phase barriers can be omitted when the device is used as a "Self-Protected Combination Motor Controller (Type E)". Link modules Feeders can be easily assembled from single devices with the help of the link modules. The following table shows the different combination options for devices with screw or spring-type terminals. Combination devices 3RV motor starter protectors/ circuit breakers 3RT contactors; 3RW30, 3RW40 soft starters; 3RF34 solid-state contactors -- Version not possible ) The link modules cannot be used for the 3RV.-4PA., 3RV.-4FA., 3RV.3-4K.., 3RV.3-4R.., 3RV.3-4K.., 3RV.3-4R.., 3RV7 and 3RV8 motor starter protectors/circuit breakers. ) To assemble the feeder between a motor starter protector and a soft starter in size S, the 3RA93-AC00 standard mounting rail adapter must be used. 3) The motor starter protector to contactor hybrid link modules cannot be used for the 3RV.-4PA., 3RV.-4FA., 3RV7 and 3RV8 motor starter protectors/circuit breakers. They are only suitable for constructing direct-on-line starters. Note: Link modules can be used in - Sizes S00 and S0: up to max. 3 A - Size S: up to max. A Hybrid link modules can be used in - Sizes S00 and S0: up to max. 3 A Link modules Screw terminals Spring-type terminals Size Size Link modules for connecting switching devices to 3RV motor starter protectors/circuit breakers ) 3RT contactors S00 S00 3RA9-3RA9- with AC or DA00 AA00 DC coil S0 S00 -- S S 3RA AA00 3RT contactors with AC coil 3RT contactors with DC coil 3RW30 soft starters 3RW30/ 3RW40 soft starters 3RF34 solidstate contactors S0 S0 3RA9- AA00 S00 S0 -- S0 S0 3RA9- BA00 S00 S0 -- S00 S00 3RA9- BA00 S0 S00 -- S0 S0 3RA9- BA00 S00 S0 -- S ) S ) 3RA93- AA00 -- S00/S0 S00 3RA9- -- BA00 3RA9- AA00 3RA9- AA00 3RA9- GA00 3RA9- GA00 Hybrid link modules for connecting contactors with spring-type terminals to 3RV motor starter protectors/circuit breakers with screw terminals 3) 3RT contactors S00 S00 3RA9- -- with AC or DC coil S0 S0 FA00 3RA9- FA00 -- Siemens Canada Limited Industrial Control Product Catalog 09 /9

10 Accessories Mounting accessories Selection and ordering data Version For motor starter protector size Innovations 3RV/3RT Order No. Terminal blocks and phase barriers for Self-Protected Combination Motor Controllers (Type E) according to UL 08 / UL Note: UL 08 / UL demands -inch clearance and -inch creepage distance at line side for Combination Motor Controller Type E. The following terminal blocks or phase barriers must be used on 3RV motor starter protectors. The terminal blocks or phase barriers cannot be used in combination with the 3RV9. three-phase busbars. For construction with three-phase busbars, see Accessories for busbar Terminal blocks type E 3RV9 8-H 3RV9 8-K For extended clearance and creepage distances ( and inch) Phase barriers For extended clearance and creepage distances ( and inch) Order Quantity S00, S0 3RV9 8-H unit S0 unit S 3RV9 3-E unit S3 3RT946-4GA07 unit S00, S0 3RV9 8-K unit S 3RV9 38-K unit 3RT946-4GA07 Actuating voltage of contactor Size 3RT contactor Link modules for motor starter protector to contactor ) 3RA9 -AA00 3RV motor starter protector Innovations 3RV/3RT Order No. Order Quantity For mechanical and electrical connection between motor starter protector and contactor with screw Screw Terminals terminals. Single-unit packaging AC/DC S00 S00/S0 3RA9 -DA00 unit AC S0 S00/S0 3RA9 -AA00 unit AC S S 3RA9 3-AA00 unit AC S3 S3 3RA9 4-AA00 unit DC S0 S00/S0 3RA9 -BA00 unit DC S S 3RA9 3-AA00 unit DC S3 S3 3RA9 4-AA00 unit Multi-unit packaging AC/DC S00 S00/S0 3RA9 -D 0 units AC S0 S00/S0 3RA9 -A 0 units DC S0 S00/S0 3RA9 -B 0 units AC/DC S S 3RA9 3-A units AC/DC S3 S3 3RA9 4-A units For mechanical and electrical connection between motor starter protector and contactor with spring-type terminals. Spring-type Terminals 3RA9 -AA00 Single-unit packaging AC/DC S00 S00 3RA9 -AA00 unit AC ) S0 S0 3RA9 -AA00 unit DC S0 S0 3RA9 -AA00 unit Multi-unit packaging AC/DC S00 S00 3RA9 -A 0 units AC ) S0 S0 3RA9 -A 0 units DC S0 S0 3RA9 -A 0 units Spacers For compensating height on AC contactors Single-unit packaging S0 S0 3RA9 -CA00 unit Multi-unit packaging S0 S0 3RA9 -C units ) The link modules for motor starter protector to contactor cannot be used for the 3RV. -4PA., 3RV. -4FA., 3RV7 and 3RV8 motor starter protectors ) A spacer for height compensation on AC contactors size S0 is optionally available Note Size S0 link modules can be used up to max. 3 A. Size S link modules can be used up to A max. /0 Siemens Canada Limited Industrial Control Product Catalog 09

11 Accessories Mounting accessories Selection and ordering data Size Order No. PU 3RW30, 3RW40 3RV (UNIT, soft starters; motor starter protectors SET, M) 3RF34 solid-state contactors PS* Weight approx. kg Link modules for motor starter protector to soft starter ) 3) and motor starter protector to solid-state contactor Connection between motor starter protector and soft Screw terminals starter / solid-state contactor with screw terminals Single-unit packaging S00 S00/S0 3RA9 -BA00 unit S0 S00/S0 3RA9 -BA00 unit S 3) S 3RA9 3-AA00 unit 0.04 S3 4) S3 3RA9 4-A unit 0.04 Multi-unit packaging S00 S00/S0 3RA9 -B 0 units S0 S00/S0 3RA9 -B 0 units RA9 -BA00 S 3) S 3RA9 3-A units 0.04 S3 4) S 3RA9 4-A units 0.04 Connection between motor starter protector and soft starter with spring-type terminals Spring-type terminals 3RA9 -GA00 Single-unit packaging S00 S00 3RA9 -GA00 unit S0 S0 3RA9 -GA00 unit 0.07 Multi-unit packaging S00 S00 3RA9 -G 0 units S0 S0 3RA9 -G 0 units 0.70 ) The link modules for motor starter protector to soft starter and for motor starter protector to solid-state contactor cannot be used for the 3RV. -4PA., 3RV. -4FA., 3RV7 and 3RV8 motor starter protectors. Note: S0 link modules can be used up to max. 3 A. S link modules can be used up to max. A. Actuating voltage of contactor Size Order No. PU 3RT 3RV (UNIT, contactors motor SET, M) starter protectors PS* Weight approx. kg Hybrid link modules for motor starter protector to contactor ) For mechanical and electrical connection between motor starter protector with screw terminals and contactor with spring-type terminals Single-unit packaging AC/DC S00 S00 3RA9 -FA00 unit 0.09 /DC S0 S0 3RA9 -FA00 unit 0.06 AC ) 3RA9 -FA00 Multi-unit packaging AC/DC S00 S00 3RA9 -F 0 units 0.90 AC ) /DC S0 S0 3RA9 -F 0 units 0.60 Spacers ) for compensating the height on AC contactors Single-unit packaging S0 S0 3RA9 -CA00 unit 0.00 Multi-unit packaging S0 S0 3RA9 -C units RA9 -FA00 ) The hybrid link modules for motor starter protector to contactor cannot be Note: used for the 3RV. -4PA., 3RV. -4FA., 3RV7 and 3RV8 motor Hybrid link modules can be used up to max. 3 A. starter protectors or reversing starters. ) A spacer for height compensation on AC contactors size S0 is optionally available. See 3RA9-CA00 3) To assemble the starter between a motor starter protector and a soft starter in size S, the 3RA93-AC00 standard mounting rail adapter must be used. 4) It is only permissible to assemble the feeder between the motor starter protector and the soft starter in Size S3 on a mounting plate. Siemens Canada Limited Industrial Control Product Catalog 09 /

12 Accessories Mounting accessories Selection and ordering data Isolator module ) 3RV938-A without padlock 3RV9 8-A without padlock Type Design Visible isolating distance for isolating individual motor starter protectors from the network, lockable in isolating position. For MSP size Order No. Order Quantity Weight approx. (kg) S00, S0 3RV9 8-A unit 0.3 S ) 3RV9 38-A unit Auxiliary terminal, 3 pole 3RT9 46-4F For connection of auxiliary and control cables to the main conductor connections S3 3RT9 46-4F unit 0.0 Covers 3RV (size S3) with 3RT9 46-4EA Terminal cover Additional touch guard for box terminals to be fitted at the box terminals ( units can be mounted per MSP) S 3RT9 36-4EA unit 0.04 S3 3RT9 46-4EA unit RV9 8-4AA00 Terminal cover For maintaining the required for cable lug and bar connection voltage clearance and as protection against the equipment being touched if distant box terminals are used ( units can be mounted per MSP) S3 3RT9 46-4EA unit RV9 08-4AA0 Terminal cover for devices with ring lug Main current level S00, S0 ) 3RV9 8-4AA00 unit 0.0 terminal connection For transverse auxiliary switches S00, S0 ) 3RV9 08-4AA0 unit 0.0 3RV9 08-0P Scale cover For covering the current setting scale. Packing unit: Bag with 0 scale covers. S00, S0, S 3) 3RV9 08-0P 0 units S3 3RV9 08-0P 0 units Fixing Material 3RB900-0B Push-in lugs Two units are required for For screwing the motor starter protector onto mounting plates. each motor starter protector. S00 3RB9 00-0B 0 units 0.0 Tools for opening spring-type terminals by hand 3RA9 08-A Screwdriver Length approx. 00 mm, For all devices with spring terminals 3.0 mm x 0. mm, titanium gray/black partially insulated S00, S0, S 3RA9 08-A unit 0.04 ) The isolator module for size S can be used only with 3RV motor starter protectors/circuit breakers up to max. A. Similarly, it cannot be used with the transverse auxiliary switch or three-phase busbars. ) Compatible with 3RV0 motor starter protectors. 3) Compatible with 3RV0, 3RV, and 3RV4 motor starter protectors. / Siemens Canada Limited Industrial Control Product Catalog 09

13 Accessories Rotary operating mechanisms Selection and ordering data Type Details Door-coupling rotary operating mechanisms for Classic and Innovations 3RV9 6-0B For MSP size Order No. The door-coupling rotary operating mechanisms consist of a knob, a coupling driver and a 30/330 mm long extension shaft (6 mm x 6 mm). The door-coupling rotary operating mechanisms are designed to degree of protection IP64. The door locking device prevents accidental opening of the control cabinet door in the ON postion of the motor starter protector. The OFF position can be locked with up to 3 padlocks. Door-coupling rotary operating mechanisms (black) EMERGENCY STOP door-coupling rotary operating mechanisms (red/yellow) Approx. Wt. (kg) Extension shaft 30 mm S00, S0 3RV9 6-0B 0. S, S3 3RV9 6-0B 0. Extension shaft 330 mm S00, S0 3RV9 6-0K 0.34 S, S3 3RV9 6-0K 0.3 Extension shaft 30 mm S00, S0 3RV9 6-0C 0.0 S, S3 3RV9 6-0C 0. Extension shaft 330 mm S00, S0 3RV9 6-0L 0.36 S, S3 3RV9 6-0L 0.3 Door-coupling rotary operating mechanisms for arduous conditions 3RV9 6-C The door-coupling rotary operating mechanisms consist of a knob, a coupling driver, an extension shaft of 300 mm length (8 mm x 8 mm), a spacer and two metal brackets, into which the MSP is inserted. The door-coupling rotary operating mechanisms are designed for degree of protection IP. The door locking device reliably prevents accidental opening of the control cabinet door in the ON position of the MSP. The OFF postion can be locked with up to 3 padlocks. Laterally mountable auxiliary releases and two-pole auxiliary switches can be used. The door-coupling rotary operating mechanisms thus meet the requirements for isolating functions according to IEC Door-coupling rotary S00, S0 3RV9 6-B. operating mechanisms S 3RV9 36-B.6 (gray) S3 3RV9 46-B.7 EMERGNCY STOP door-coupling S00, S0 3RV9 6-C. rotary operating mechanisms S 3RV9 36-C. (red/yellow) S3 3RV9 46-C.7 Enclosures and front plates Front Plates 3RV9 3-4B + 3RV9 3-4G Type Details Molded-plastic front plate For actuation of 3RV MSPs in any with rotary operating mechanism, enclosure, degree of protection IP lockable. For actuation of 3RV motor (front plate) starter protectors in any enclosure Molded-plastic front plate with EMERGENCY STOP door-coupling rotary operating mechanisms (red/yellow) Holders for front plates Enclosures for wall mounting ) 3RV9 3-CA00 Molded-plastic enclosure for wall mounting with rotary operating mechanism, lockable, with metric cable gland 3RV9 3-DA0 Cast aluminum surface-mount enclosure with rotary operating mechanism, lockable, with metric cable gland Cast aluminum surface-mount enclosure with EMERGENCY-OFF rotary operating mechanism, red/yellow, lockable, with metric cable gland EMERGENCY-STOP operation of 3RV MSPs in any enclosure, degree of protection IP Holder is mounted on front plate, MSP size S00 or S0 with or without accessories is snapped in For MSP size S00, S0 S, S3 S00, S0 S, S3 Order No. Approx. Wt. (kg) 3RV9 3-4B RV9 3-4E 0.08 S00, S0 3RV9 3-4G 0.9 Degree of protection IP, with N and PE terminals, lockable in 0 position overall width: 4 mm (for switch + lateral auxiliary switch) S00, S0 3RV9 3-CA mm (for switch + lateral auxiliary switch + auxiliary release) Degree of protection IP, with PE terminals, ) lockable in 0 position overall width: 7 mm (for MSP + lateral auxiliary switch + auxiliary release) Degree of protection IP, with PE terminals, ) lockable in 0 position overall width: 7 mm (for MSP + lateral auxiliary switch + auxiliary release) S00, S0 3RV9 3-DA S00, S0 3RV9 3-DA0.0 S00, S0 3RV9 3-GA0.0 ) If required, an additional N terminal can be mounted (e.g. 8WA0 -BG). ) For S versions, see 3RV933-DA00 (black) or 3RV933-GA00 (red/yellow) Siemens Canada Limited Industrial Control Product Catalog 09 /3

14 Accessories 3RV9 infeed system Overview The 3RV9 infeed system is a convenient means of energy supply and distribution for a group of several motor starter protectors or complete motor starters with a screw or springtype connection in sizes S00 and S0 (exception: this system cannot be used for the 3RV, 3RV7 and 3RV8 motor starter protectors/circuit breakers). The 3RV9 infeed system is approved in accordance with IEC to 00V. It is also UL approved and authorized for Self- Protected Combination Motor Controller (Type E starter) as well as for Type F starter (Type E starter + contactor). The system is based on a basic module complete with a lateral incoming unit (three-phase busbar with infeed). This infeed with spring-type terminals is mounted on the right or left depending on the version and can be supplied with a maximum conductor cross-section of 4 AWG (with end sleeve). A basic module has two sockets onto each of which a motor starter protector can be snapped. Expansion modules are available for extending the system (three-phase busbars for system expansion). The individual modules are connected through an expansion plug. The electrical connection between the three-phase busbars and the motor starter protectors is implemented through plug-in connectors. The complete system can be mounted on a TH 3 standard mounting rail to EN 607 and can be expanded as required up to a maximum current carrying capacity of 63 A. The system is mounted extremely quickly and easily thanks to the simple plug-in technique. Thanks to the lateral infeed, the system also saves space in the control cabinet. The additional overall height required for the infeed unit is only 30 mm. The alternative infeed possibilities on each side offer a high degree of flexibility for configuring the control cabinet: Infeed on lefthand or right-hand side as well as infeed on one side and outfeed on the other side to supply further loads are all possible. A terminal block with spring-type connections in combination with a standard mounting rail enables the integration of not only motor starter protectors but also single-phase, -phase and 3-phase components such as SY miniature circuit breakers or relay components. 3b 3a a 3-phase busbar with infeed 3-phase busbar for system expansion Expansion plug 4 6 3b Extra-wide expansion plug 7 End cover Plug-in connector Contactor base Terminal block NSB0_0078 3RV9 infeed system /4 Siemens Canada Limited Industrial Control Product Catalog 09

15 Accessories 3RV9 infeed system $ Three-phase busbars with infeed A three-phase busbar with infeed unit is required for connecting the energy supply. This module comprises one infeed module and sockets which each accept one motor starter protector. A choice of two versions with infeed on the left or right is available. The infeed is connected using spring-type terminals. The spring-type terminals permit conductor cross-sections of up to mm with end sleeves. An end cover is supplied with each module. % Three-phase busbars for system expansion The three-phase busbars for system expansion allow the system to be expanded. There is a choice of modules with or 3 sockets. The system can be expanded as required up to a maximum current carrying capacity of 63 A. An expansion plug is supplied with each module. &a Expansion plug The expansion plug is used for electrical connection of adjacent three-phase busbars. The current carrying capacity of this plug equals 63 A. One expansion plug is supplied with each threephase busbar for system expansion. Additional expansion plugs are therefore only required as spare parts. &b Extra-wide expansion plug The wide expansion plug makes the electrical connection between two three-phase busbars, thus performing the same function as the 3RV9 7-BA00 expansion plug; the electrical characteristics (e.g. a current carrying capacity of 63 A) are identical. The 3RV9 7-E expansion plug is 0 mm wider than the 3RV9 7-BA00 expansion plug, hence in the plugged state there is a distance of 0 mm between the connected threephase busbars. This distance can be used to lay the auxiliary current and control current wiring ("wiring duct"). The motor starter protector and contactor can be wired from underneath, which means that the complete cable duct above the system can be omitted. ( End cover The end cover is used to cover the three-phase busbar at the open end of the system. This cover is therefore only required once for each system. An end cover is supplied with each threephase busbar system with infeed. Further end covers are therefore only required as spare parts. * Contactor base Motor starters can be assembled in the system using the contactor base. The contactor bases are suitable for contactors sizes S00 and S0 with spring-type and screw terminals and are simply snapped onto the three-phase busbars. Direct-on-line starters and reversing starters are possible. One contactor base is required for direct-on-line starters and two are required for reversing starters. To assemble motor starters for reversing starters, the contactor bases can be arranged alongside each other (90 mm overall width). In this case the mechanical interlocking of the contactors is possible. The contactor bases are also suitable for soft starters size S00 and S0 with screw connection. The infeed system is designed for mounting on a 3 mm standard mounting rail with 7. mm overall depth. This standard mounting rail gives the contactor base a stable mounting surface to sit on. If standard mounting rails with a depth of mm are used, the spacer connected to the bottom of the contactor base must be knocked out and plugged into the mating piece that is also on the underside. Then the contactor base also has a stable mounting surface. When standard mounting rails with a depth of 7. mm are used, the spacer has no function and can be removed. The link modules are used for direct start motor starters, in which case the use of a contactor base is not absolutely necessary. Motor starter protector and contactor assemblies can then be directly snapped onto the sockets of the three-phase busbars. For starters of size S00 and S0, the corresponding 3RA9 -..., 3RA9 -..., 3RA or 3RA link modules should generally be used. + Terminal block The 3RV9 7-D terminal block enables the integration of not only motor starter protectors but also single-phase, -phase and 3-phase components. Using the terminal block the 3 phases can be fed out of the system; which means that singlephase loads can also be integrated in the system. The terminal block is plugged into the slot of the expansion plug and thus enables outfeeding from the middle or end of the infeed system. The terminal block can be rotated through 80 and be locked to the support modules of the infeed system. The 3RV9 7-7B 4 mm standard mounting rail for screwing onto the support plate is available in addition in order to be able to plug the single-phase, -phase and 3-phase components onto the infeed system. ) Plug-in connector The plug-in connector is used for the electrical connection between the three-phase busbar and the 3RV motor starter protector. These plug-in connectors are available in versions for screw or spring-type terminals. Siemens Canada Limited Industrial Control Product Catalog 09 /

16 Accessories 3RV9 infeed system Selection and ordering data Three-phase busbars with infeed 3-phase busbars with infeed incl. end cover 3RV9 7-6A Type Version For 3RV0, 3RV3, 3RV4 motor starter protectors For motor starter protectors with screw connection or spring-type terminals With infeed on the left With infeed on the right Order No. Standard Pack Quantity Weight approx. S ize kg S00, S0 3RV9 7-A S00, S0 3RV9 7-E unit unit RV9 7-A Three-phase busbars for system expansion Three-phase busbars incl. 3RV9 7- BA00 expansion plug For motor starter protectors with screw connection or spring-type terminals For motor starter protectors For 3 motor starter protectors S00, S0 3RV9 7-4A S00, S0 3RV9 7-4B unit 0.9 unit RV9 7-4A Plug-in connectors Plug-in connectors to make contact with the motor starter protectors For spring-type terminals - Single-unit packaging - Multi-unit packaging Spring-type terminals S00 ) 3RV9 7-AA00 S0 ) 3RV9 7-AA00 S00 ) 3RV9 7-A S0 ) 3RV9 7-A unit unit units units RV9 7-AA00 3RV9 7-CA00 For screw terminals - Single-unit packaging - Multi-unit packaging Screw terminals S00 ) 3RV9 7-CA00 S0 ) 3RV9 7-AA00 S00 ) 3RV9 7-C S0 ) 3RV9 7-A unit 0.09 unit units units Contactor bases Type Version For contactors Contactor bases for mounting direct-on-line or reversing starters Single-unit packaging Order No. Standard Pack Quantity Weight approx. S ize kg S00 3RV9 7-7AA00 S00, S0 3RV9 7-7AA00 unit 0.04 unit RV9 7-7AA00 ) > 4 A, note derating; see the system manual " Innovations", Chapter "Motor Starter Protectors". ) > 6 A, note derating; see the system manual " Innovations", Chapter "Motor Starter Protectors". /6 Siemens Canada Limited Industrial Control Product Catalog 09

17 Accessories 3RV9 infeed system Terminal blocks Type Version Order No. Standard Pack Quantity Weight approx. kg Terminal blocks For integration of single-phase, two-phase and three-phase components Single-unit packaging 3RV9 7-D unit RV9 7-D 4 mm standard mounting rails 4 mm standard mounting rails for mounting onto bus bar adapters Single-unit packaging 3RV9 7-7B unit 0.6 3RV9 7-7B Extra-wide expansion plugs Extra-wide expansion plugs as accessory Single-unit packaging 3RV9 7-E unit RV9 7-E Expansion plugs Expansion plugs ) as spare part Single-unit packaging 3RV9 7-BA00 unit RV9 7-BA00 End covers End covers ) as spare part Multi-unit packaging 3RV9 7-6A 0 units RV9 7-6A ) The expansion plug is included in the scope of supply of the 3RV9 7-4 three-phase busbars for system expansion. ) The end cover is included in the scope of supply of the 3RV9 7- threephase busbars with infeed system. Siemens Canada Limited Industrial Control Product Catalog 09 /7

18 3RV up to 00 A (Domestic applications) Permissible rated data of devices approved for North America (UL/CSA) Motor starter protectors of the 3RV series are approved for UL/CSA, and according to UL08/UL and CSA C. No. 4/CSA C. No they can be used on their own or as load feeders in combination with a contactor. 3RV motor starter protectors as "Manual Motor Controllers" If used as a "Manual Motor Controller", the motor starter protector is always operated in combination with an upstream short-circuit protection device. Approved fuses or a circuit breaker according to UL 489/CSA C. No. can be used. These devices must be dimensioned according to the National Electrical Code (UL) or Canadian Electrical Code (CSA). These motor starter protectors can be used as "Manual Motor Controllers" for "Group Installations", as "Manual Motor Controllers Suitable for Tap Conductor Protection in Group Installations" and as "Self-Protected Combination Motor Controllers" (Type E). Approval of the 3RV as a Manual Motor Controller can be found under the following file numbers: ULFile No. 4770, CCN: NLRV, CSA Master Contract 07, Product Class: 3 0. Motor starter protectors hp rating ) for FLA ) max. Rated current I n 40 V AC UL/CSA I 3) bc 480 V AC UL/CSA I 3) bc 600 V AC UL/CSA I 3) bc Type V -phase 3-phase A Size S00 3RV0, 3RV, 3RV3, 3RV FLA ) max. 6 A,480 V A, 600 V / ka ka Size S0 3RV0, 3RV, 3RV3, 3RV /(30) 4) FLA ) max. 3 8, A, 480 V , / / Size S 3RV03 3RV03 3RV03 3RV03 3RV03 3RV RV03, 3RV3, 3RV33, 3RV03, 3RV FLA ) MAX. A / V 00/ NEMA size 30/ / / a) with max A Class J fuse 9 a) 00 a) a) 00 a) 0 a) a) b) with max 0A Class J fuse b) 00 b) b) 00 b) 0 b) b) Size S3 3RV0 4/3RV0 4, 3RV 4, 3RV3 4/3RV FLA ) max. 99 A, 7 / V NEMA size / ) HP rating = Power rating in horse power (maximum motor rating). ) FLA = Full Load Amps/Motor full load current. 3) Corresponds to "short-circuit breaking capacity" according to UL/CSA. 4) The values in brackets only apply to 3RV.3 motor starter protectors. ka /8 Siemens Canada Limited Industrial Control Product Catalog 09

19 3RV up to 00 A (Domestic applications) 3RV motor starter protectors as "Manual Motor Controllers Suitable for Tap Conductor Protection in Group Installations" The application as "Manual Motor Controllers Suitable for Tap Conductor Protection in Group Installations" is only available from UL. CSA does not recognize this approval! When the motor starter protector is used as a "Manual Motor Controller Suitable for Tap Conductor Protection in Group Installations", it must always be combined with upstream short-circuit protection. As short-circuit-protection device, approved fuses or a motor starter protector according to UL 489 can be used. These devices must be dimensioned according to the National Electrical Code. The 3RV motor starter protectors are approved as "Manual Motor Controllers Suitable for Tap Conductor Protection in Group Installations" under the following file number: ULFile No. 4770, CCN: NLRV. Motor starter protectors hp rating ) for FLA ) max. Rated 40 V AC Up to 480Y/77V AC Up to 600Y/347V AC current I n UL UL UL 3) 3) 3) I bc I bc I bc Type V -phase 3-phase A ka ka ka Size S00 3RV FLA ) max.6 A, / Y / 77 V 00/ NEMA size 0 30/ / / Size S0 3RV FLA ) max. /0. 30 A, 480 Y / 77 V 00/ A, 600 V 30/ / NEMA size 7/ Size S 3RV03 3RV03 3RV03 3RV03 3RV03 3RV RV03, 3RV03, 3RV FLA ) MAX. A / V 00/ NEMA size 30/ / / Size S3 3RV FLA ) max. /0 7 / A, 480 V 00/ A, 600 V 30/ / NEMA size 3 7/ ) HP rating = Power rating in horse power (maximum motor rating). ) FLA = Full Load Amps/Motor full load current. 3) Complies with "short-circuit breaking capacity" according to UL. Siemens Canada Limited Industrial Control Product Catalog 09 /9

20 3RV up to 00 A (Domestic applications) 3RV motor starter protectors as "Self-Protected Combination Motor Controllers (Type E)" UL 08/UL approval demands -inch clearance and -inch creepage distance at line side for Self-Protected Combination Motor Controller Type E. Therefore, 3RV0 motor starter protectors of sizes S00 to S are approved according to UL 08/UL in combination with the terminal blocks listed below. CSA does not require these extended clearances and creepage distances. According to CSA, these terminal blocks can be omitted when the device is used as a Self-Protected Combination Motor Controller. The 3RV0 motor starter protectors are approved as Self-Protected Combination Motor Controllers under the following file numbers: UL File No. E6943, CCN: NKJH CSA Master Contract 07, Product Class: 3 08 Motor starter hp rating ) for FLA ) Rated current Up to 40 V AC Up to 480 Y/77 V AC Up to 600 Y/347 V AC protectors max. I n UL/CSA I 3) bc UL/CSA I 3) bc UL/CSA I 3) bc Type V -phase 3-phase A ka ka ka Size S00 3RV0 + 3RV9 8-H4) ) FLA ) max. 6 A 480 V 00 3 NEMA size / Size S RV0 + 3RV9 8-H 4) ) FLA ) max.. 30 A, 480 V A, 600 V NEMA size 7/ Size S 3RV03 3RV03 3RV03 3RV03 3RV03 3RV RV03/3RV03 + 3RV938-K 4) FLA ) MAX. A / V 00/ NEMA size 30/ / / Size S3 3RV04 + 3RT946-4GA07 4) FLA ) max A, 480 V A, 600 V NEMA size 3 7/ Ratings of the auxiliary switches and alarm switches ) HP rating = Power rating in horse power (maximum motor rating). ) FLA = Full Load Amps/Motor full load current. Lateral auxiliary switch with NO + NC, NO, NC, NO + NC and signalling switch Transverse auxiliary switch with changeover contact Max. rated voltage to NEMA u AC V to NEMA s AC V Uninterrupted current A 0. Breaking capacity A600 B600 C300 Q300 R300 R300 3) Corresponds to "short-circuit breaking capacity" according to UL/CSA. 4) Not required for CSA. ) Alternatively, the 3RV98-K phase barrier can also be used. 30 Transverse auxiliary switch with NO + NC, NO /0 Siemens Canada Limited Industrial Control Product Catalog 09

21 3RV7/8 circuit breakers 3RV7/8 circuit breakers These circuit breakers are approved according to UL 489 and CSA C. No. -0 for 00 % rated current (00 % rated breaker). They can be used therefore as upstream short-circuit protective devices for "Manual Motor Controllers" and "Manual Motor Controllers Suitable for Tap Conductor Protection in Group Installations". The 3RV7/8 circuit breakers are approved under the following file numbers: ULFile No. E3044, CCN: DIVQ, CSA Master Contract 07, Product Class: V AC 480 Y/77 V AC 480 V AC 600 Y/347 V AC Circuit breakers Rated current I n UL/CSA UL/CSA UL/CSA UL/CSA Type A ) I bc ka ) I bc ka ) I bc ka ) I bc ka Size S00/S0 3RV7 / 3RV RV7 / 3RV Size S3 3RV ) Complies with "short-circuit breaking capacity" according to UL. Siemens Canada Limited Industrial Control Product Catalog 09 /

22 3RV up to 00 A (Export applications) Technical specifications Short-circuit breaking capacity I cu, I cs acc. to IEC This table shows the rated ultimate short-circuit breaking capacity I cu and the rated service short-circuit breaking capacity I cs of the 3RV motor starter protectors/circuit breakers with different inception voltages dependent of the rated current I n of the motor starter protectors/circuit breakers. Power can be supplied to the motor starter protectors/circuit breakers via the terminals at the top or at the bottom without restricting the rated data. If the short-circuit current at the place of installation exceeds the rated short-circuit breaking capacity of the motor starter protector/circuit breaker as specified in the table, a back-up fuse is required. It is also possible to install an upstream motor starter protector/circuit breaker with a limiter function. The maximum rated current for the back-up fuse is specified in the tables. The rated ultimate short-circuit breaking capacity then applies as specified on the fuse. Fuseless construction Motor starter protector contactor combinations for short-circuit currents up to 0 ka can be ordered in the form of fuseless load feeders according to Chapter 6. Motor starter protectors/circuit breakers Rated current Up to 40 V AC ) Up to Up to Up to Up to 690 V AC ) I n 400 V ) /4 V AC ) 440 V ) /460 V AC ) 00 V ) / V AC ) I cu I cs Max. fuse (gl/gg) (these values do not apply to 3RV7 4 circuit breakers) I cu I cs Max. fuse (gl/gg) 3) I cu I cs Max. fuse I cu (gl/gg) 3) I cs Max. fuse I cu (gl/gg) 3) I cs Max. fuse (gl/gg) 3)4) Type A ka ka A ka ka A ka ka A ka ka A ka ka A Size S00 3RV ; ; ; ; 6 0; 4 3 ; Size S0 3RV Size S 3RV.3 4; ; ; Values on request Size S, with increased switching capacity 3RV.3 4; ; Values on request Size S3 3RV ; Short-circuit resistant up to at least 0 ka No back-up fuse required, since short-circuit resistant up to 00 ka ) 0 % overvoltage. 4) ) Alternatively, fuseless limiter combinations for 690 VAC can also be used. % overvoltage. 3) Back-up fuse only required if the short-circuit current at the place of installation > I cu. / Siemens Canada Limited Industrial Control Product Catalog 09

23 3RV up to 00 A (Export applications) Short-circuit breaking capacity I cuit in the IT system (IT network) according to IEC RV motor starter protectors are suitable for operation in IT systems. Values valid for triple-pole short-circuit are I cu up to I cs. In case of double ground fault on different phases at the input and output side of a motor starter protector, the special short-circuit breaking capacity I cuit applies. The specifications in the table below apply to 3RV motor starter protectors. In the colored areas, I cuit is 00 ka, or in some ranges it is 0 ka. Therefore the motor starter protectors are short-circuit resistant in these ranges. If the short-circuit current at the place of installation exceeds the rated short-circuit breaking capacity of the motor starter protector as specified in the table, a back-up fuse is required. The maximum rated current for the back-up fuse is specified in the tables. The rated short-circuit breaking capacity then applies as specified on the fuse. Motor starter protectors Rated current Up to 40 V AC ) Up to 400 V ) /4 V AC ) Up to 00 V ) / V AC ) ) ) Up to 690 V AC I n I cuit Max. fuse I cuit Max. fuse I cuit Max. fuse I cuit Max. fuse (gl/gg) 3) (gl/gg) 3)4) (gl/gg) 3) (gl/gg) 3) Type A ka A ka A ka A ka A Size S00 3RV0, On request On request On request On request 3RV6-0BD0 0.8; ; ; ; ;4 3 ; :0 8; Size S0 3RV Size S 3RV Values on request Size S, with increased switching capacity 3RV Values on request Size S3 3RV ; Short-circuit resistant up to at least 0 ka No back-up fuse required, since short-circuit resistant up to 00 ka ) 0 % overvoltage. ) % overvoltage. 3) Back-up fuse only required, if short-circuit current at the place of installation > I cuit. 4) Alternatively, fuseless limiter combinations for 690 VAC can also be used. ) Over-voltage category II applies for applications on IT systems > 600V Siemens Canada Limited Industrial Control Product Catalog 09 /3

24 3RV up to 00 A Technical data Rules for mounting motor starter protectors/circuit breakers When mounting MSPs, the following clearance must be maintained to grounded or live parts. MSP Clearance to grounded or live parts Y X at the side Z mm mm mm Type size 3RV. S00 up to 690 V RV. S0 ) up to 00 V up to 690 V ) RV. 3 S up to 690 V 0 0 3RV. 4 S3 up to 40 V up to 440 V up to 00 V up to 690 V RV7 4 S3 up to 40 V up to 400 V Minimum clearance between MSPs and grounded or live parts ) Up to and including the setting range of 3 A. For the 36/40 A setting range the clearance is 70 mm. ) In conjunction with the type E terminal block 3RV98-H the applicable lateral clearance is 30 mm for all voltages. Standard mounting for S0, S and S3 Wiring module Size S0: 3RV9 -AB Size S: 3RV9 3-A Size S3: 3RA9 43-3D (Caution: The wiring module demands 0 mm spacing between the MSPs) Line side Load side /4 Siemens Canada Limited Industrial Control Product Catalog 09

25 3RV up to 80 A General data Type 3RV.. 3RV.. 3RV.3. 3RV7, 3RV8 Size S00 S0 S S00, S0 Dimensions (W x H x D) Screw terminals Spring-type terminals Standards IEC , EN (VDE 0660 Part 00) mm mm 4 x 97 x 9 4 x 06 x 9 4 x 97 x 9 4 x 9 x 9 x 40 x Yes IEC , EN (VDE 0660 Part 0) Yes IEC , EN (VDE 0660 Part 0) Yes Yes Yes -- UL 08/UL , CSA C. No. 4/CSA C. No Yes Yes Yes -- UL 489, CSA C. No Yes Number of poles 3 Max. rated current I n max A (= max. rated operational current I e ) Permissible ambient temperature Storage/transport C Operation I n : A C (current reduction above +60 C) -- I n : A C (the devices must not be mounted side-by-side and they must not be assembled with link modules with contactors. A lateral clearance of 9 mm is required.) -- I n : A C (current reduction above +60 C) Permissible rated current at inside temperature of control cabinet +60 C % C % 87 Permissible rated current at ambient temperature of enclosure (applies for motor starter protector/circuit breaker inside enclosure 3 A) +3 C % 00 On C % 87 request 87 Rated operational voltage U e Acc. to IEC V AC 690 (when a molded-plastic enclosure is used only 00 V) Acc. to UL/CSA V AC 600 Rated frequency Hz 0/60 Rated insulation voltage U i V 690 Rated impulse withstand voltage U imp kv 6 Utilization category IEC (motor starter protector/circuit breaker) A IEC (motor starter) AC-3 Trip class CLASS Acc. to IEC /0 -- DC short-circuit breaking capacity (time constant t = ms) conducting path 0 V DC ka 0 On 0 conducting paths in series 300 V DC ka 0 request 0 3 conducting paths in series 40 V DC ka 0 0 Power loss P v for each motor starter protector/circuit breaker Dependent on the rated current I n (upper setting range) P R per conducting path = Ι 3 H W D I n : A W -- I n : A W I n : A W I n : 6 A W I n : 7... A W I n : A W I n : A W I n : 4... A W I n : A W On request -- Shock resistance Acc. to IEC g/ms / (square and sine pulse) Degree of protection Acc. to IEC 609 IP0 Touch protection Acc. to EN 074 Finger-safe for vertical contact from the front Temperature compensation Acc. to IEC C Phase failure sensitivity Acc. to IEC Yes (only for 3RV3 motor starter protectors) No Explosion protection Safe operation of motors with Yes (only for 3RV0 motor starter protectors) "increased safety" type of protection EC type test certificate number according to directive 94/9/EC (ATEX) DMT 0 ATEX F 00 II () GD On request No 4 x 44 x 9 -- Siemens Canada Limited Industrial Control Product Catalog 09 /

26 3RV up to 80 A Conductor cross-sections of main circuit Type 3RV. 3RV. 3RV.3-4B., 3RV.3-4D.., 3RV.3-4E.., 3RV.3-4P.., 3RV.3-4S.., 3RV.3-4T.., 3RV.3-4U.., 3RV.3-4V.. 3RV.3-4J.., 3RV7, 3RV8 3RV.3-4K.., 3RV.3-4R.., 3RV.3-4W.., 3RV.3-4X.., 3RV43-4VA., 3RV.3 Size S00 S0 S S00, S0 Connection type Screw terminals Terminal screw M3, Pozidriv size ) If two different conductor cross-sections are connected to one clamping point, both cross-sections must be in the range specified. M4, Pozidriv size M6, Pozidriv size M4, Pozidriv size Operating devices mm Prescribed tightening torque Nm Conductor cross-sections (min./max.), or conductors can be connected Solid or stranded mm x ( ) ), x 4 Finely stranded with end sleeve (DIN 468-) mm x (0.....) ), x (....) ), x ( ) ) x (.... 6) ), x 0 AWG cables, solid or stranded AWG x (0... 6) ), x (8... ) ) Connection type Spring-type terminals Operating devices mm 3.0 x 0. and 3. x 0. Conductor cross-sections (min./max.), or conductors can be connected Solid or stranded mm x ( ) x (... 0) -- Finely stranded without end sleeve mm x (0.....) x (... 6) -- Finely stranded with end sleeve (DIN 468-) mm x (0.....) x (... 6) -- AWG cables, solid or stranded AWG x (0... ) x (8... 8) -- Max. external diameter of the conductor insulation mm Connection type Ring terminal lug connections Terminal screw M3, Pozidriv size x (....) ), x (... ) ), x (... 3) ), x (... 0) ), x (.... 0) ) x (... 3) ) x (... 0) ) max. x x (... 6) ), x (... ) ), x (... 6), x (... ) ) x (... 3) ) max x (6... ) ), x (8... 3) ), x (8... ) ), x (4... 0) x (4... 8) ) x (8... ) ) x (8... ) ) M4, Pozidriv size Operating devices mm Prescribed tightening torque Nm Usable ring terminal lugs d 3 mm d = min. 3., d = min. 4.3, -- DIN 4634 without insulation sleeve DIN 46 without insulation sleeve DIN 4637 with insulation sleeve JIS C80 Type R without insulation sleeve JIS C80 Type RAV with insulation sleeve JIS C80 Type RAP with insulation sleeve d d 3 = max. 7. d 3 = max.. I0_ /6 Siemens Canada Limited Industrial Control Product Catalog 09

27 3RV up to 80 A Front transverse auxiliary switches 3RV.. 3RV.. 3RV.3. 3RV7, 3RV8 S00 S0 S S00, S0 Switching capacity for different voltages CO NO + NC, NO Rated operational current e At AC-, alternating voltage - 4 V A 4-30 V A 3 0. At AC- = th, alternating voltage - 4 V A V A 0. At DC-3, direct voltage L/R 00 ms - 4 V A - 48 V A V A V A V A Minimum load capacity V 7 ma Front transverse solid-state compatible auxiliary switches Rated operational voltage U e Alternating voltage V Rated operational current e /AC-4 at U e = V A 0. Rated operational voltage U e Direct voltage L/R 00 ms V 60 Rated operational current e /DC-3 at U e = 60 V A 0.3 Minimum load capacity V ma Lateral auxiliary switches with signaling switch Switching capacity for different voltages CO Switching capacity for different voltages: Lateral auxiliary switch with NO + NC, NO, NC, NO + NC Signaling switch Rated operational current e At AC-, alternating voltage - 4 V A 6-30 V A V A V A At AC- = th, alternating voltage - 4 V A 0-30 V A V A V A 0 At DC-3, direct voltage L/R 00 ms - 4 V A - 0 V A V A V A 0. Minimum load capacity V 7 ma Auxiliary releases Power consumption Undervoltage releases Shunt releases During pick-up - AC voltages VA/W 0./3 0./3 - DC voltages W During uninterrupted duty - AC voltages VA/W 7./ DC voltages W. -- Response voltage Tripping V x U s x U s Pick-up V x U s -- Opening time maximum Short-circuit protection for auxiliary and control circuits ms 0 Melting fuses operational class gg A 0 Miniature circuit breakers C characteristic A 6 (prospective short-circuit current < 0.4 ka) Siemens Canada Limited Industrial Control Product Catalog 09 /7

28 3RV up to 80 A Conductor cross-sections for auxiliary and control circuits Type 3RV. 3RV. 3RV.3, 3RV.3 3RV7, 3RV8 Size S00 S0 S S00, S0 Connection type Screw terminals Terminal screw M3, Pozidriv size Operating devices mm... 6 Prescribed tightening torque Nm Conductor cross-sections (min./max.), or conductors can be connected Solid or stranded mm x (0.....) ), x ( ) ) Finely stranded with end sleeve (DIN 468-) mm x (0.....) ), x ( ) ) AWG cables, solid or stranded AWG x (8... 4) ), x (0... 6) ) Connection type Spring-type terminals Operating devices mm 3.0 x 0. and 3. x 0. Conductor cross-sections (min./max.), or conductors can be connected Solid or stranded mm x (0.....) Finely stranded without end sleeve mm x (0.....) Finely stranded with end sleeve (DIN 468-) mm x (0.....) AWG cables, solid or stranded AWG x (0... 4) Max. external diameter of the conductor insulation mm 3.6 Connection type Terminal screw M3, Pozidriv size Operating devices mm... 6 Tightening torque Nm ) If two different conductor cross-sections are connected to one clamping point, both cross-sections must be in the range specified. ) The following can be connected when both clamping points are connected: - Front... 0 mm² and rear... 0 mm² - Front... 6 mm² and rear... 6 mm² Ring terminal lug connections Usable ring terminal lugs d 3 mm d = min. 3., d 3 = max. 7. DIN 4634 without insulation sleeve d DIN 46 without insulation sleeve DIN 4637 with insulation sleeve JIS C80 Type R without insulation sleeve JIS C80 Type RAV with insulation sleeve JIS C80 Type RAP with insulation sleeve Terminals for "Self-Protected Combination Motor Controllers (Type E) according to UL 08/UL " Type 3RV98-H Prescribed tightening torque Nm Conductor cross-sections Front clamping point connected - Solid mm² Finely stranded with end sleeve mm² Stranded mm² AWG cables, solid or stranded AWG Terminal screw M4 Rear clamping point connected - Solid mm² Finely stranded with end sleeve mm² Stranded mm² AWG cables, solid or stranded AWG Terminal screw M4 Both clamping points connected NSB0_00479 NSB0_00480 NSB0_ Front clamping point: Solid Finely stranded with end sleeve Stranded AWG cables, solid or stranded Terminal screw - Rear clamping point: Solid Finely stranded with end sleeve Stranded AWG cables, solid or stranded Terminal screw I0_740 mm²... 0 mm²... 0 ),... 6 ) mm² AWG M4 mm²... 0 mm²... 0 ),... 6 ) mm² AWG M4 /8 Siemens Canada Limited Industrial Control Product Catalog 09

29 3RV up to 00 A Overview S00 MSP with laterally mounted undervoltage release with leading auxiliary switch 3RV Motor Starter Protectors (MSPs) are built for a world of applications while meeting the requirements of control users worldwide. Each MSP features a manual ON/OFF switch, a Class 0 adjustable bimetallic overload relay (Class 0 available in the two largest frame sizes), and magnetic trip elements for short circuit protection. Construction The motor starter protectors are available in four sizes: Size S00-3RV0 Maximum rated current is 6 Amps. Suitable for motors up to 0 HP at 600V. Available in both screw terminal and springtype terminal versions. Size S0-3RV0 Maximum rated current is 40 Amps. Suitable for motors up to 0 HP at 600V. Available in both screw terminal and springtype terminal verisons. Size S - 3RV03 Maximum rated current is 0 Amps. Suitable for motors up to 0 HP at 600V. Size S3-3RV04 Maximum rated current is 00 Amps. Suitable for motors up to 00 HP at 600V. Functions Releases 3RV motor starter protectors are equipped with bimetallicbased, inverse-time delayed overload releases - electromagnetic short-circuit releases. The overload releases can be set in accordance with the load current. The overcurrent releases are permanently set to a value 3 times the rated current and thus enable trouble-free start-up of motors. The scale cover can be sealed to prevent unauthorized adjustments to the set current. Release classes The release classes of thermally delayed releases are based on the tripping time (t A ) at 7. times the operational current in cold state (excerpt from IEC ): CLASS 0 A s < t A < 0 s CLASS 0 4 s < t A < 0 s CLASS 0 6 s < t A < 0 s CLASS 30 9 s < t A < 30 s The release must trip within this time! Operating mechanisms S00, S0, S and S3 MSPs are actuated via a rotary operating mechanism. If the MSP trips, the rotary operating mechanism switches to the tripped position to indicate this. Before the MSP is reclosed, the rotary operating mechanism must be reset manually to 0 position, in order to prevent the former from closing by mistake before the fault has been cleared. In the case of MSPs with rotary operating mechanisms, an electrical signal can be output via a signalling switch to indicate that the MSP has tripped. All operating mechanisms can be locked in 0 position with a padlock (shackle diameter 3. to 4. mm). Application Operating conditions 3RV MSPs are suitable for use in any climate. They are designed for operation in closed rooms under normal conditions (e.g. no dust, corrosive vapours or harmful gases). Suitable enclosures must be provided for installation in dusty or damp rooms. Motor Protection 3RV MSPs use bimetallic heater elements to provide class 0 or 0 overcurrent protection for both AC and DC motors. The bimetallic heaters sense the motor current directly, so the overloads are insensitive to high frequencies, harmonic waves and sinusoidal currents and voltages. Each MSP has a fourth bimetallic strip that reacts only to the ambient temperature inside the control panel. This ambient compensation prevents the MSP from nuisance tripping when the panel temperature is higher than the ambient temperature of the motor. A built-in differential trip bar causes the MSP to trip faster on a phase loss condition, to help reduce motor damage from phase loss. Magnetic trip elements in each MSP take the device off line when it senses currents of 3 times the maximum FLA dial setting. 3RT 0-0 A A 0 MSP or Application Frame Size Standard Amperage Range Class Terminal Type Auxiliary Circuit Breaker 0 = Motor Protection 3 = S Possible choices listed below see A = 0 = Screw Switch 7 = UL = S3 page /4-/7 for an entire listing = Spring Loaded 0,, 4 B through K 4 = Ring Lug 3RV 0-0 A A 0 Application Frame Size Standard Amperage Range Class Terminal Type Auxiliary Innovations 0 = Motor Protection = S00 Possible choices listed below see A = 0 = Screw Switch MSP or 7 = UL 489 = S0 page /4-/7 for an entire listing B = 0 = Spring Loaded Circuit Breaker 3 = S 0,, 4 B through K 4 = Ring Lug 4 = S3 Note: MPSs and Contactors of the same frame size are made to easily fit together with the use of a link module. Siemens Canada Limited Industrial Control Product Catalog 09 /9

30 Mounting accessories Applications: The 3RV MSPs can be used in a variety of applications: As a manual starter All 3RV MSPs are UL listed as Manual Motor Controllers per UL08. This makes them ideal for applications requiring simple manual starting and stopping of motors. A separate short circuit protective device, such as a circuit breaker or fuses, is still required ahead of the MSP. This up-stream protective device should be sized per NEC code, not to exceed 400% of the maximum FLA adjustment dial setting. As a component in a group installation A group motor installation indicates multiple motor controllers under one short circuit protective device, such as a circuit breaker. 3RV MSPs have a group installation short-circuit current rating of ka at 480V and up to 30kA at 600V. By using a link module, a 3RT contactor can be directly mounted to the load side of the MSP. 3RV MSPs have been UL tested with and without 3RT contactors for group installation. As a Self-protected manual combination starter, Type E. Most 3RV MSPs have also been UL listed as UL08 Type E, Selfprotected Manual Combination Starters. This UL listing allows the MSP to be mounted in a manually operated machine without having to add separate short circuit protection upstream. These devices have a short circuit current rating of 40V, 480Y/77V and up to 600Y/347V. As part of a Combination Motor Contoller, Type F When a 3RT contactor is connected to the load side of a 3RV device that is rated as a "Manual Self-protected Combination Motor Controller, Type E", the assembly can be applied as a "Combination Motor Controller, Type F". This versions allows for remote starting and stopping of the motor load. These assemblies have a short circuit current rating of 40V, 480Y/77V and up to Y/347V. Terminals for "Combination Motor Controller Type E" to UL 08 The 3RV MSP for motor protection is approved according to UL 08 as "Combination Motor Controller Type E". As of July, 00, UL 08 demands at line-side of the device used for this purpose an increased clearance and creepage distance (" or "). Here, the terminal block 3RV9 8-H must be used for size S0. The block is simply screwed to the basic unit. Basic units of size S are already compliant with new clearance and creepage distance requirements. The terminal block 3RT9 46-4GA07 must be used for size S3. The standard box terminal is to be replaced by this terminal block. According to CSA, these terminal blocks can be omitted when the device is used as "Combination Motor Controller Type E". By using a link module, a 3RT contactor can be directly mounted to the load side of a 3RV MSP. This assembly of a 3RV and a 3RT provides a complete, remotely operated, combination starter, Type F. As a circuit breaker for export When exporting to many countries outside of the U.S. and North America, the 3RV can be applied as a thermal magnetic circuit breaker for use in motor branch circuits. 3RV9 8-K 3RV9 38-K 3RV9 8-H 3RT9 46-4GA07 Terminals for "Combination Motor Controller Type E" to UL 08 3RV9 8-H RT9 46-4GA /30 Siemens Canada Limited Industrial Control Product Catalog 09

31 3RV up to 00 A Switching of direct current 3RV motor starter protectors fo r alternating currents are also suitable for DC switching. The maximum permissible DC voltage per conducting path must, however, be adhered to. Higher voltages require a series connection with or 3 conducting paths. Example circuit for size S00 to S3 3RV motor starter protectors Example circuit for size S00 to S3 3RV motor starter protectors Maximum permitted DC voltage U e Notes The response values of the overload release remain unchanged; the response values of a short-circuit release increase by approximately 30 % for DC. The example circuits for DC switching can be seen in the table below. L+ L NSB0_0000a M L+ L M NSB0_0000a L+ L NSB0_00003a M 0 VDC Three-pole switching, non-grounded system ) If there is no possibility of a ground fault, or if every ground fault is rectified immediately (ground-fault monitoring), then the maximum permitted DC voltage can be tripled. 300 VDC Two-pole switching, grounded system The grounded pole is always assigned to the individual conducting path, so that there are always conducting paths in series in the event of a ground fault. 40 VDC Single-pole switching, grounded system 3 conducting paths in series. The grounded pole is assigned to the unconnected conducting path. ) It is assumed that this circuit always provides safe disconnection even in the event of a double ground fault that bridges two contacts. Design Mounting The motor starter protectors are secured in position by snapping them onto 3 mm standard mounting rails according to DIN EN 0 0. A mounting rail with a height of mm is required for S3 MSPs. A 7-mm mounting rail can be used as an alternative here. S and S3 MSPs can also be screwed directly onto a baseplate. The push-in lugs 3RV9 8-0B are available for screw mounting of S00 and S0 MSPs. 3RV98-0B Screw connection 3RV MSPs of sizes S00 and S0 are fitted with terminals with captive screws and clamping pieces, allowing the connection of conductors with different cross-sections. The box terminals of the S and S3 MSPs also enable conductors with different crosssections to be connected. With the exception of S3 MSPs which are equipped with 4 mm hexagon socket terminal screws, all terminal screws are tightened with a Pozidriv screwdriver size. The box terminals of the S3 MSPs can be removed in order to connect conductors with cable lugs or connecting bars. A terminal cover is available to help prevent contact with shock protection and to ensure that the required clearances and creepage distances are maintained if the box terminals are removed. Spring-type connection ) As an alternative to screw terminals, S00 and S0 devices are also available with Spring-type terminal connection. This screwless Spring-type terminal technique, as known for modular terminal blocks, offers shock-proof and vibration proof connection of conductors. Devices with Spring-type connection allow independent connection of two conductors per terminal. MSP with Spring-type terminal connection ) It is assumed that this circuit always provides safe cut-out, even in the event of a double earth fault that bridges two contacts. ) For notes on Spring-type terminal connection, see section 9. Siemens Canada Limited Industrial Control Product Catalog 09 /3

32 3RV up to 00 A Characteristics The time/current characteristic, the current limiting characteristics and the I²t characteristics were determined in accordance with DIN VDE 0660 or IEC The tripping characteristic of the inverse-time delayed overload releases (thermal overload releases or A releases) for DC and AC with a frequency of 0 to 400 Hz also apply to the time/current characteristic. The characteristics apply to the cold state. At operating temperature, the tripping times of the thermal releases are reduced to approximately %. Under normal operating conditions, all three poles of the device must be loaded. The three main conducting paths must be connected in series in order to protect single-phase or DC loads. With -pole and 3-pole loading, the maximum deviation in the tripping time for 3 times the setting current and upwards is ± 0 % and thus in accordance with DIN VDE 0. The tripping characteristics for the instantaneous, electromagnetic overcurrent releases (short-circuit releases, N releases) are based on the rated current I n that represents the maximum value of the setting range for MSPs with adjustable overload releases. If the current is set to a lower value, the tripping current of the N release is increased by a corresponding factor. The characteristics of the electromagnetic overcurrent releases apply to frequencies of 0/60 Hz. Appropriate correction factors must be used for lower frequencies up to 6 / 3 Hz, for higher frequencies up to 400 Hz and for DC. The printed characteristic curve determined for the MSP relates to a specific setting range. It is, however, also valid as a schematic representation of MSPs with other current ranges. Typical time/current characteristic of 3RV Circuit diagrams Internal connections Motor starter protectors 3RV. /3 Siemens Canada Limited Industrial Control Product Catalog 09

33 3RV up to 00 A Dimension drawings 3RV MSP, size S00 3RV0 3RV RV MSP, size S RV MSP, size S / L 3/ L / L / T 4/ T 6/ T3 3RV.3 motor starter protector (<= 4A) Siemens Canada Limited Industrial Control Product Catalog 09 /33

34 3RV up to 00 A 3RV.3 MSP, size S / L 3/ L / L / T 4/ T 6/ T3 3RV7 and 3RV8 circuit breakers, size S00, S0 and S3 3RV7, 3RV8 7 7 Ø Ø ) Mounting according to EN 607 ) Mounting to standard according mounting to EN 607 rail TH 3. to standard ) Drilling mounting pattern. rail TH 3. ) Drilling pattern ) ) ) ) NSB0_076b NSB0_076b RV7 circuit breakers, size S3 3RV7 4,, 6 30 Ø ) Mounting according to EN 607 on TH 3 standard mounting rail, mm deep, or TH 7 standard mounting rail. ) Drilling pattern ) ) 70 7 NSB0_03c /34 Siemens Canada Limited Industrial Control Product Catalog 09

35 Mountable accessories Overview Mounting location and function The 3RV motor starter protectors/circuit breakers have three main contact elements. In order to achieve maximum flexibility, auxiliary switches, signaling switches, auxiliary releases and isolator modules can be supplied separately. Front side Note: A maximum of four auxiliary contacts with auxiliary switches can be mounted on each motor starter protector/circuit breaker. Left-hand side Notes: A maximum of four auxiliary contacts with auxiliary switches can be mounted on each motor starter protector/circuit breaker. Lateral auxiliary switches (two contacts) and signaling switches can be mounted separately or together. The signaling switch cannot be used for the 3RV7 and 3RV8 circuit breakers. Right-hand side Notes: One auxiliary release can be mounted per motor starter protector/circuit breaker. Accessories cannot be mounted at the right-hand side of the 3RV motor starter protectors for motor protection with overload relay function. Transverse auxiliary switches, solid-state compatible transverse auxiliary switches NO + NC or NO or CO Lateral auxiliary switches ( contacts) NO + NC or NO or NC Lateral auxiliary switches (4 contacts) NO + NC Signaling switches Tripping NO + NC Short circuit NO + NC Auxiliary releases Shunt releases or Undervoltage releases or Undervoltage releases with leading auxiliary contacts NO Top Isolator modules Notes: The isolator module cannot be used for the 3RV7 and 3RV8 circuit breakers. The isolator module for size S - can only be used with 3RV motor starter protectors/circuit breakers up to max. A - cannot be used with the transverse auxiliary switch The isolator module covers the terminal screws of the transverse auxiliary switch. If the isolator module is used, we therefore recommend that either the lateral auxiliary switches be fitted or that the isolator module not be mounted until the auxiliary switch has been wired. These components are easily fitted to the switches without the use of any tools according to requirements. Overview graphic, see page 7/7. An auxiliary switch block can be inserted transversely on the front. The overall width of the motor starter protectors/circuit breakers remains unchanged. One of the three lateral auxiliary switches can be mounted on the left side per motor starter protector/circuit breaker. The contacts of the auxiliary switch close and open together with the main contacts of the motor starter protector/circuit breaker. The width of the lateral auxiliary switch with two contacts is 9 mm. One lateral auxiliary switch with four contacts can be mounted on the left side per motor starter protector/circuit breaker. The contacts of the auxiliary switch close and open together with the main contacts of the motor starter protector/circuit breaker. The width of the lateral auxiliary switch with four contacts is 8 mm. One signaling switch can be mounted on the left side of each motor starter protector. The signaling switch has two contact systems. One contact system always signals tripping irrespective of whether this was caused by a short circuit, an overload or an auxiliary release. The other contact system only switches in the event of a short circuit. There is no signaling as a result of switching off with the actuator. In order to be able to switch on the motor starter protector again after a short circuit, the signaling switch must be reset manually after the error cause has been eliminated. The overall width of the signaling switch is 8 mm. For remote-controlled tripping of the motor starter protector/circuit breaker. The release coil should only be energized for short periods (see circuit diagrams). Trips the motor starter protector/circuit breaker when the voltage is interrupted and prevents the motor from being restarted accidentally when the voltage is restored. Used for remote-controlled tripping of the motor starter protector/circuit breaker. Particularly suitable for EMERGENCY-STOP disconnection by way of corresponding EMERGENCY-STOP pushbuttons according to DIN EN Function and use as for the undervoltage release without leading auxiliary contacts, but with the following additional function: the auxiliary contacts will open in switch position OFF to deenergize the coil of the undervoltage release, thus interrupting energy consumption. In the "tripped" position, these auxiliary contacts are not guaranteed to open. The leading contacts permit the motor starter protector/circuit breaker to reclose. The overall width of the auxiliary release is 8 mm. Isolator modules can be mounted to the upper connection side of the motor starter protectors. The supply cable is connected to the motor starter protector through the isolator module. The plug can only be unplugged when the motor starter protector is open and isolates all 3 poles of the motor starter protector from the network. The shock-protected isolation point is clearly visible and secured with a padlock to prevent reinsertion of the plug. For a complete overview of which accessories can be used for the various motor starter protectors/circuit breakers, see page 7/. Siemens Canada Limited Industrial Control Product Catalog 09 /3

36 Mountable accessories Overview S00 and S0 motor starter protectors with mountable accessories NSB0_ Motor starter protectors, sizes S or S3, with mountable accessories Mountable accessories for all sizes S00... S3 Mountable accessories for sizes Mountable accessories for sizes Transverse auxiliary switch 6. Undervoltage release with S00, S0 7 S00... S3 leading auxiliary contacts (can not be used with 3RV S, S3 3 circuit breakers) Lateral auxiliary switch with contacts Lateral auxiliary switch with 4 contacts 4 Shunt release Undervoltage release 6. Undervoltage release with leading auxiliary contacts 8 9 Signaling switch (can not be used with 3RV7 and 3RV8 circuit breakers) Isolator module (can not be used with 3RV7 and 3RV8 circuit breakers) Terminal block E S0 and S /36 Siemens Canada Limited Industrial Control Product Catalog 09

37 Mountable accessories Circuit diagrams Internal connections Shunt release 3RV9 0-D / 3RV9 0-D Undervoltage release 3RV9 0-A / 3RV9 0-A Undervoltage release with leading auxiliary contacts 3RV9 -C / 3RV9 -C Lateral auxiliary switch with 4 contacts 3RV9 0-J / 3RV9 0-J Transverse auxilia ry switch 3RV9 0-D 3RV9 0-D 3RV9 0-G 3RV9 0-G 3RV9 0-E 3RV9 0-E 3RV9 0-E 3RV9 0-E Lateral auxiliary switch with contacts 3RV9 0-F 3RV9 0-A 3RV9 0-F 3RV9 0-A 3RV9 0-A 3RV9 0-A 3RV9 0-B 3RV9 0-B 3RV9 0-B 3RV9 0-B 3RV9 0-C 3RV9 0-C 3RV9 0-C 3RV9 0-C SignalIng switch 3RV9 -M / 3RV9 -M External connections Shunt release Undervoltage release S0; S; S Q S F; F F3 F4 OFF pushbuttons in system Motor starter protectors Auxiliary switch of MSP Q Fuses (gl/gg) max. 0 A Shunt release Undervoltage release Siemens Canada Limited Industrial Control Product Catalog 09 /37

38 Mountable accessories Circuit diagrams Typical circuits 3RV MSPs with 3RV9 -M signalling switch H: "Short circuit" signal H: "Overload" or "Tripped by auxiliary release" signal H; H F Q S Indicator lights Fuses (gl/gg) max. 0 A MSP Signalling switch Separate "Tripped" and "Short circuit" signals Motor starter protectors tripped by means of pushbutton or EMERGENCY STOP button in the system The leading auxiliary contacts open in "OFF" position of the MSP to switch off the coil voltage of the undervoltage release, thus avoiding power consumption in switched off state. In the "tripped" position of the MSP, these contacts are not guaranteed to open. F; F Q F4 S; S, S3 Fuses (gl/gg) max. 0 A MSP Undervoltage release OFF pushbuttons in system Dimension drawings Isolator modules 3RV9 8-A for MSPs size S00, S0 3RV9 38-A for MSPs size S For dimension drawings of auxiliary switches, signalling switches and auxiliary releases, see page /33 and /34. /38 Siemens Canada Limited Industrial Control Product Catalog 09

39 3RV Motor Starter Protectors 3RV Motor Starter Protectors up to 00 A Accessories Busbar accessories Overview The MSPs are mounted directly with the aid of busbar adapters on FastBus-busbar systems with 40 mm and 60 mm centerline spacing, in order to save space and to reduce wiring times and costs. The MSPs are snapped onto the adapter and connected on the line side. This prepared unit is then plugged directly onto the busbar system, and is thus connected both mechanically and electrically at the same time. FastBus-busbar adapters for busbar systems with 40 mm centerline spacing are suitable for copper busbars with a width of mm to mm, while those with 60 mm centerline spacing are suitable for widths of mm to 30 mm. The busbars can be 4 to mm or 0 mm thick. Refer to page /0 for busbar adapters for specific MSPs and accessories. MSPs and combination starters with FastBus-busbar adapters snapped onto busbars Further busbar adapters for snap-mounting direct-on-line starters and reversing starters, as well as additional accessories such as line terminals and outgoing terminals, busbar copper, etc., can be found in Section. Insulated three-phase busbar system 8US busbar adapters for 60 mm systems Three-phase busbar systems provide an easy, time-saving and clearly arranged means of feeding 3RV motor starter protectors with screw terminals. They can be used for the different types of motor starter protector up to 3 A. The 3RV9 three-phase busbar systems are generally unsuitable for the 3RV motor starter protectors for motor protection with overload relay function and for the 3RV7 and 3RV8 circuit breakers according to UL 489 / CSA C. No. -0. The motor starter protectors are mounted directly with the aid of busbar adapters on busbar systems with 60 mm center-to-center clearance in order to save space and to reduce infeed times and costs. The busbars are suitable for between and circuit breakers/motor starter protectors. However, any kind of extension is possible by clamping the tags of an additional busbar (rotated by 80 ) underneath the terminals of the respective last motor starter protector. A combination of motor starter protectors of different sizes is possible. The motor starter protectors are supplied by appropriate feeder terminals. The busbar adapters for busbar systems with 60 mm center-tocenter clearance are suitable for copper busbars with a width of mm to 30 mm. The busbars can be mm or 0 mm thick. The motor starter protectors are snapped onto the adapter and connected on the line side. This prepared unit is then plugged directly onto the busbar system, and is thus connected both mechanically and electrically at the same time. For further busbar adapters for snap-mounting direct-on-line starters and reversing starters as well as additional accessories such as line terminals and outgoing terminals, flat copper profile, etc., can be found in Section. 3RV9 -AB 3RV9 -CB NSB0_0080 NSB0_0079 3RV9 -B 3RV9-6AB three-phase busbar system size S00/S0 load feeders with busbar adapters snapped onto busbars The three-phase busbar systems are finger-safe. They are designed for any short-circuit stress which can occur at the output side of connected motor starter protectors. The three-phase busbar systems can also be used to construct Type E Starters according to UL/CSA. Special feeder terminals must be used for this purpose however (see Selection and Ordering Data on page /8). Siemens Canada Limited Industrial Control Product Catalog 09 /39 Busbar adapters

Motor Starter Protectors

Motor Starter Protectors Motor Starter Protectors Industrial Controls Product Catalog 207 Section contents Section Overview /2 - /3 Motor Starter Protectors 3RV20 MSP, Class 0/20 /4 - /5 Circuit Breakers 3RV27, 3RV28 Circuit Breaker

More information

IEC Power Control SIRIUS. Motor Starter Protectors. Revised 04/20/15. Section Overview... 1/2-1/3. Motor Starter Protectors

IEC Power Control SIRIUS. Motor Starter Protectors. Revised 04/20/15. Section Overview... 1/2-1/3. Motor Starter Protectors 04/20/15 IEC Power Control Motor Starter Protectors Contents Pages Section Overview......................... 1/2-1/3 Motor Starter Protectors 3RV20 MSP, Class 10/20.................... 1/4-1/5 3RV10 MSP,

More information

SIRIUS 3RV2 Motor Starter Protectors/Circuit Breakers up to 40 A Accessories Enclosures and front plates

SIRIUS 3RV2 Motor Starter Protectors/Circuit Breakers up to 40 A Accessories Enclosures and front plates Motor Starter Protectors/Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors/Circuit Breakers up to 40 A Accessories Enclosures and front plates Overview Enclosures For stand-alone installation of 3RV20

More information

Protection Equipment. 5/2 Introduction

Protection Equipment. 5/2 Introduction Protection Equipment /2 Introduction SIRIUS 3RV2 Motor Starter Protectors/ Circuit Breakers up to 40 A /6 General data /12 For motor protection /14 For motor protection with overload relay function /1

More information

Siemens AG Price groups PG 14O, 41B, 41E, 41F, 41G, 41H, 41J, 42F, 42J

Siemens AG Price groups PG 14O, 41B, 41E, 41F, 41G, 41H, 41J, 42F, 42J Protection Equipment Siemens AG 2015 Click on the Article No. in the catalog PDF to access it in the Industry Mall and get all related information. Article-No. 3RA1943-2C 3RA1943-2B 3RA1953-2B 3RA1953-2N

More information

Protection Equipment

Protection Equipment Protection Equipment Price Groups 101, 102, 121, 131, 143 /2 Introduction Motor Starter Protectors/ Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors up to 40 A new /7 General data /13 For motor protection

More information

3RV1011-0DA15 CIRCUIT-BREAKER, SIZE S00,

3RV1011-0DA15 CIRCUIT-BREAKER, SIZE S00, Low-Voltage Controls and Distribution > Industrial Controls > Protection Equipment > Circuit Breakers/Motor Starter Protectors > Motor Starter Protectors SIRIUS RV up to 00 A RV0-0DA5 CIRCUIT-BREAKER,

More information

SIRIUS 3RU2 Thermal Overload Relays

SIRIUS 3RU2 Thermal Overload Relays Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors. The overload relay can be connected directly to

More information

IEC CONTACTORS. Contacts Model List Model List AC3 UL 115 V 230 V 200 V 230 V 460 V 575 V NO NC Number Price Number Price 3RT101

IEC CONTACTORS. Contacts Model List Model List AC3 UL 115 V 230 V 200 V 230 V 460 V 575 V NO NC Number Price Number Price 3RT101 IEC CONTACTORS Description: RT01 Contactors Are Available With Cage Clamps On The Main Terminal Connections As Well As The Auxiliary Terminal Connections. RT02, RT0 and RT04 Contactors Are Available With

More information

SIRIUS Innovations. Technical information for ring terminals SIRIUS. Answers for industry.

SIRIUS Innovations. Technical information for ring terminals SIRIUS. Answers for industry. SIRIUS Innovations. Technical information for ring terminals SIRIUS Answers for industry. Order data Assembly up to 7.5 kw (S00) fused assembly 2 Motor Starter (Fuses, Contactor, Overload Relay) Contactor

More information

Protective Devices: Circuit-Breakers 1 )

Protective Devices: Circuit-Breakers 1 ) Protective Devices: Circuit-Breakers 1 ) /2 Introduction SIRIUS circuit-breakers 1 ) up to 100 A / General data /20 For motor protection /22 For motor protection with overload relay function /23 For starter

More information

Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases

Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar

More information

3VF3 to 3VF8 Circuit-Breakers

3VF3 to 3VF8 Circuit-Breakers 3VF3 to 3VF8 Circuit-Breakers Accessories Operating mechanisms For other s for 3VF3 with knob Rotary drive, complete, scope of supply Cubicle door for 3VF6 Motor operating mechanism for 3VF3 Motor operating

More information

Product index. 4 - Manual motor protectors. Phone: Fax: Web: -

Product index. 4 - Manual motor protectors. Phone: Fax: Web:  - Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type

More information

Product index. 4 - Manual motor protectors. Manual motor protectors. Manual motor protectors Low Voltage Products & Systems 4.

Product index. 4 - Manual motor protectors. Manual motor protectors. Manual motor protectors Low Voltage Products & Systems 4. Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type

More information

BETA Switching Switches and Light Indicators

BETA Switching Switches and Light Indicators Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET

More information

Overload Relays. SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A for standard applications. 5/78 Siemens IC Overview

Overload Relays. SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A for standard applications. 5/78 Siemens IC Overview SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors.

More information

Control Circuit Protection

Control Circuit Protection Contents 5SJ4 Branch Circuit Protectors 5SY4 Supplementary Protectors 5SY6 Supplementary Protectors 16/19 5SJ4 Page Selection and ordering data 1-pole up to 63A 16/4 1-pole, 2-pole, 16/5 3-pole, 240VAC

More information

Manual Motor Starters. Meta-MEC

Manual Motor Starters. Meta-MEC Manual Motor Starters Meta-MEC Manual Motor Starters LS Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 2 45 mm 70 mm 63AF 100AF 3 3 Manual LS Meta-MEC Motor Starters

More information

Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases

Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters

More information

General data 5/37. Overview

General data 5/37. Overview General data Overview Benefits High short-circuit breaking capacity in the feeder Optimum usability in motor feeders for the special voltages 440 V, 480 V, 0 V and 690 V Compact design The are available

More information

Protectors. 35mm DIN rail snap-on mounting. Wide range of accessories

Protectors. 35mm DIN rail snap-on mounting. Wide range of accessories Manual motor protectors Manual motor protectors Manual motor Protectors MS116 MS32 MS4X MS49X Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL Listed and CSA certified

More information

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X Manual motor protectors Type MS116 Type MS32 Type MS4X Type MS49X Manual motor protectors MS116 MS32 MS4X MS49X Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL ed and

More information

Industry Automation Control Components

Industry Automation Control Components Industry Automation Control Components SIRIUS 3RV2 Motor Starter Protectors SIRIUS 3RV21 Motor Starter Protectors can be easily and flexibly combined with other SIRIUS devices to reduce space requirements

More information

3NP1 Fuse Switch Disconnectors up to 630 A

3NP1 Fuse Switch Disconnectors up to 630 A Switch Disconnectors 3NP1 Fuse Switch Disconnectors up to 630 A Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors

More information

27Overload Relays. Overview Combinations of overload relays and contactors SIRIUS 3R. Thermally delayed overload relays CLASS 10

27Overload Relays. Overview Combinations of overload relays and contactors SIRIUS 3R. Thermally delayed overload relays CLASS 10 27Overload Relays Overview Combinations of overload relays and contactors SIRIUS 3R 27Overload Relays Contactors Current range A 3RT10 1 Size S00 3/4/5.5 kw 3RT10 2 Size S0 5.5/7.5/11 kw 3RT10 3 Size S2

More information

Selection Guide Motor Control Device Solutions

Selection Guide Motor Control Device Solutions Selection Guide Motor Control Device Solutions Expect more and get it from c3controls. Our portfolio of Motor Control Devices consists of worldclass products designed and manufactured to meet your requirements

More information

Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage

Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution

More information

Stars or starlets? Competitor overview switching devices. Only for internal use. sirius IN COMPARISON

Stars or starlets? Competitor overview switching devices. Only for internal use. sirius IN COMPARISON Only for internal use Stars or starlets? Competitor overview switching devices sirius IN COMPARISON Who are the real stars? The comparison. Under ideal conditions, the human eye can make-out approximately

More information

Motor Controllers + Circuit Breakers

Motor Controllers + Circuit Breakers Series General...2 Series & KTA3-100 Base Units...4 Series Base Units...6 Series Base Units...8 Accessories...10 Technical Information -...20 Dimensions -...33 Technical Information - KTA3-100...39 Dimensions

More information

XT IEC Power Control Manual Motor Protectors

XT IEC Power Control Manual Motor Protectors May 07 Product Selection Table 7. Rotary with Screw Terminals Global Ratings and North American Ratings Type and Type 2 Coordination Motor Protective Device with Thermal and Magnetic Trip Rated Uninterrupted

More information

Industrial Controls. Load Feeder. Configuring SIRIUS Innovations Selection data for Fuseless and Fused Load Feeders. Configuration Manual 04/2011

Industrial Controls. Load Feeder. Configuring SIRIUS Innovations Selection data for Fuseless and Fused Load Feeders. Configuration Manual 04/2011 Load Feeder Selection data for Fuseless and Fused Load Feeders Configuration Manual 04/2011 Industrial Controls Answers for industry. Introduction 1 General information 2 Industrial switchgear Load feeders

More information

Protectors. Manual motor. Types MS116, MS132, MS45x, MS49x. MS Series. Manual motor protectors. Type MS116. Type MS132. Type MS45x.

Protectors. Manual motor. Types MS116, MS132, MS45x, MS49x. MS Series. Manual motor protectors. Type MS116. Type MS132. Type MS45x. Types MS116, MS132, MS5x, MS9x are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/OFF control, and protection against short circuit,

More information

Type MS450 MS497. Phone: Fax: Web: - Manual motor protectors

Type MS450 MS497. Phone: Fax: Web:  -   Manual motor protectors Manual motor protectors Type MS40 MS497 MS40 MS497 Manual motor starters Overload tripping class 10 Overload tripping class 20 FLA adjustment range Single-phase1 Horsepower ratings Three-phase 11V 230V

More information

F Motor Circuit Controllers. Series KT7 Motor Circuit Controllers. KT4 Manual Motor Starters. General Description...F2

F Motor Circuit Controllers. Series KT7 Motor Circuit Controllers. KT4 Manual Motor Starters. General Description...F2 Series KT7 General...2 Series & KTA3-100 Base Units...4 Series Base Units...6 Series Base Units...8 Accessories...10 Technical Information - KT7...20 Dimensions - KT7...32 Technical Information - KTA3-100...37

More information

3VU13, 3VU16 Circuit-Breakers

3VU13, 3VU16 Circuit-Breakers 3VU3, 3VU6 Circuit-Breakers Description The 3VU3, 3VU6 circuit-breakers are compact circuit-breakers for currents up to 80 A which operate according to the current limiting principle. The devices are used

More information

System Manual 02/2008

System Manual 02/2008 System Manual 02/2008 SIRIUS Infeed System for 3RA6 sirius COMPACT STARTER Introduction 1 Product-specific information 2 SIRIUS industrial switchgear Load feeders, motor and soft starters System Manual

More information

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X Manual motor protectors Type MS116 Type MS32 Type MS4X Type MS49X Manual motor protectors Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL Listed and CSA certifi ed for

More information

Features 1 Phase HP/Volts 1/6 HP AT 230 V 3 Phase HP/Volts 1/2 HP AT 200/230 V, 1-1/2 HP AT 460/575 V

Features 1 Phase HP/Volts 1/6 HP AT 230 V 3 Phase HP/Volts 1/2 HP AT 200/230 V, 1-1/2 HP AT 460/575 V 804 South Street 7964-76, TX Nacogdoches Phone: 96-69-794 Fax: 96-60-468 A07NN A Man Motor Protector Eaton Corp Catalog Number A07NN Manufacturer Eaton Corp Description Manual Motor Starter, Motor Protector;

More information

MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories

MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories Page 1 of 5 MS132-10 ABB contact for United States of America General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: MS132-10 1SAM350000R1010 4013614400100 MS132-10

More information

Item Code Description Quantity 3NA LV HRC FUSE LINK S00 80A 690AC 250DC 30 3NA3832 LV HRC FUSE LINK GL/GG S00 125A 500VAC 250VDC 0

Item Code Description Quantity 3NA LV HRC FUSE LINK S00 80A 690AC 250DC 30 3NA3832 LV HRC FUSE LINK GL/GG S00 125A 500VAC 250VDC 0 Controlgear Products +27 () 11 97 116 sales@controlgear.co.za Siemens stock items on hand as at Mon, 3/4/218, 14:4 GMT+2 3NA3824-6 LV HRC FUSE LINK S 8A 69AC 25DC 3 3NA3832 LV HRC FUSE LINK GL/GG S 125A

More information

File E47705 Vol. 7 Sec. 9 Page 1 Issued: and Report Revised:

File E47705 Vol. 7 Sec. 9 Page 1 Issued: and Report Revised: File E47705 Vol. 7 Sec. 9 Page 1 Issued: 1997-08-29 and Report Revised: 2005-06-30 DESCRIPTION PRODUCT COVERED: USL, CNL - Type Nos. 3RV1021, 3RV1121, 3RV1321 or 3RV1421, followed by combination of 0,

More information

Siemens AG RW BB14 3RW BB14 3RW BB14. per PU three-phase induction opera- Rated Rated power of three-phase

Siemens AG RW BB14 3RW BB14 3RW BB14. per PU three-phase induction opera- Rated Rated power of three-phase Siemens AG 2008 3RW Soft Starters Selection and ordering data 28-1BB14 38-1BB14 47-1BB14 Ambient temperature 40 C Ambient temperature 50 C Size DT Order No. Price Rated Rated power of Rated Rated power

More information

3RW Soft Starters. General data. 6/4 Siemens LV

3RW Soft Starters. General data. 6/4 Siemens LV General data Overview The advantages of the SIRIUS soft starters at a glance: Soft starting and smooth ramp-down 1) Stepless starting Reduction of peaks Avoidance of mains voltage fluctuations during starting

More information

For Operation in the Control Cabinet

For Operation in the Control Cabinet As an option the thyristors can also be protected by SITOR semiconductor fuses from short-circuiting so that the soft starter is still functional after a short-circuit (type of coordination ). Three LEDs

More information

Phone: Fax: Web: -

Phone: Fax: Web:  - HK1-11 HKF1-11 HK-11 HKS-20 uxiliary contacts Mounting uxiliary contacts position Pilot duty rating Instantaneous Lagging / leading / max. 116 132 5x 9x quantity ac dc NO NC NO NC 2 - - - HK1-20 Right

More information

DEVICE STATE/BYPASSED FAILURE OVERLOAD

DEVICE STATE/BYPASSED FAILURE OVERLOAD Technical specifications Type 5. 7. Control electronics Rated values Terminal Rated control supply voltage A1A2 V AC 115 230 115 230 Tolerance % -15+10-15+10 Rated control supply STANDBY ma 15 15 Rated

More information

PKZ and PKE motor-protective circuit-breakers

PKZ and PKE motor-protective circuit-breakers PKZ and PKE motor-protective circuit-breakers Machinery and installation downtimes should be kept as short as possible. The PKZ fuseless motor-protective circuit-breakers combine short-circuit and overload

More information

The breakers offer thermal-magnetic trip protection according to Z and K characteristics.

The breakers offer thermal-magnetic trip protection according to Z and K characteristics. Series High Performance Circuit Breakers Description The high performance MCB offers a compact solution to circuit protection. The devices are DIN rail mounted. The is available with application-specific

More information

For Operation in the Control Cabinet 3RW Soft Starters

For Operation in the Control Cabinet 3RW Soft Starters General Data Overview The advantages of the SIRIUS soft starters at a glance: Soft starting and smooth ramp-down 1) Stepless starting Reduction of current peaks Avoidance of mains voltage fluctuations

More information

GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features

GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator

More information

1.1. Contactors and Starters... Contents Description Relays and Timers... Miniature Controls... Manual Motor Protectors. XT IEC Power Control

1.1. Contactors and Starters... Contents Description Relays and Timers... Miniature Controls... Manual Motor Protectors. XT IEC Power Control . Contents Description Relays and Timers......................... Miniature Controls......................... Contactors and Starters.................... Thermal Relays.................... C440/XT Electronic

More information

SENTRON 3NP1 Fuse Switch Disconnectors up to 630 A

SENTRON 3NP1 Fuse Switch Disconnectors up to 630 A Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors Fuse monitoring possible throughout Busbar supports can be

More information

AF40... AF96 3-pole contactors Technical data

AF40... AF96 3-pole contactors Technical data Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional

More information

Switch Disconnectors. SENTRON 3NP5 Fuse Switch Disconnectors up to 630 A. Introduction. 7/106 Siemens LV

Switch Disconnectors. SENTRON 3NP5 Fuse Switch Disconnectors up to 630 A. Introduction. 7/106 Siemens LV Switch Disconnectors Introduction Siemens AG 2010 Overview 3NP5 0 3NP5 2 3NP5 fuse disconnector range 3NP5 4 SENTRON 3NP5 fuse disconnectors are controls for the occasional manual ing/isolating of loads

More information

Protection Equipment. Overload Relays. Reference Manual 04/2011. Industrial Controls. Answers for industry.

Protection Equipment. Overload Relays. Reference Manual 04/2011. Industrial Controls. Answers for industry. Protection Equipment Overload Relays Reference Manual 04/2011 Industrial Controls Answers for industry. Protection Equipment 2 3 7 7 8 9 14 1 16 17 18 18 19 20 2 26 27 28 29 30 32 37 38 40 42 Introduction

More information

Motor protective circuit breakers

Motor protective circuit breakers Motor protective circuit breakers Motor protective circuit breakers MSP Description The MSP0, MSP1 motor starter protectors are compact motor starter protectors for currents up to 52 A which operate according

More information

Series KTU7 UL489 Molded Case Circuit Breakers

Series KTU7 UL489 Molded Case Circuit Breakers Series KTU7 UL489 Molded Case Circuit Breakers Versatile, convenient and space saving for a variety of applications Sprecher+Schuh s KTU7 series of UL Molded Case Circuit Breakers are UL489 and CE listed

More information

US Catalog January Motor protection and control Manual motor starters, contactors and overload relays

US Catalog January Motor protection and control Manual motor starters, contactors and overload relays US Catalog January 2017 Motor protection and control Manual motor starters, contactors and overload relays Motor rated operational powers and currents The currents given below concern standard three-phase

More information

smissline Description

smissline Description Modular power distribution bus system Description The power distribution bus system provides a versatile and flexible means of distributing power to a wide variety of electrical devices. Ideal for group

More information

C E R T I F I C A T E O F C O M P L I A N C E

C E R T I F I C A T E O F C O M P L I A N C E 1512 E47705 Report Reference E4770519970821 15OCTOBER12 Issued to: SIEMENS AG DF CP R&D V 3 WERNERVONSIEMENSSTRASSE 48 9 AMBERG GERMANY This is to certify that representative samples of MOTOR CONTROLLERS,

More information

1.1. Contactors and Starters... Contents Description Relays and Timers... Miniature Controls... Manual Motor Protectors. XT IEC Power Control

1.1. Contactors and Starters... Contents Description Relays and Timers... Miniature Controls... Manual Motor Protectors. XT IEC Power Control Contents Description Relays and Timers......................... Miniature Controls......................... Contactors and Starters.................... Thermal Overload Relays.................... C440/XT

More information

Partnership that you can trust. LV Switchgear Motor Control Products.

Partnership that you can trust. LV Switchgear Motor Control Products. s Partnership that you can trust LV Switchgear Motor Control Products Maximum etail Price w.e.f. st October, 204 www.siemens.co.in s SIMOCODE pro S Get your motor control center s intelligent and compact

More information

AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC

AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24

More information

3RT14 Contactors with 3 Main Contacts

3RT14 Contactors with 3 Main Contacts 3RT14 Contactors with 3 Main Contacts for Switching Resistive Loads Contactor Size 3RT14 46 Mechanical endurance Oper. 10 million Electrical endurance Oper. 0.5 million C-1 utilization category at I e

More information

C E R T I F I C A T E O F C O M P L I A N C E

C E R T I F I C A T E O F C O M P L I A N C E Issued to: SIEMENS AG DF CP R&D VC 2 WERNER-VON-SIEMENS-STRASSE 48 92224 AMBERG, GERMANY This is to certify that representative samples of Combination Motor Controllers (See following pages for additional

More information

FMotor Circuit Controllers

FMotor Circuit Controllers Technical Information Motor Circuit Controller IEC Performance Data Catalog Number KTA7-25S...32S 0.16A 0.25A 0.4A 0.63A 1A 1.6A 2.5A 4A 6.3A 10A 16A 20A 25A 29A 32A Rated Operational Current, I e [A]

More information

KT4 Manual Motor Starter

KT4 Manual Motor Starter KT4 Manual Motor Starter Ideal for use as a manual starter The KT4 is a manual motor starter that employs the features of power switching, thermal overload protection and control circuit signaling in one

More information

Series KTU7 UL489 Molded Case Circuit Breakers

Series KTU7 UL489 Molded Case Circuit Breakers Series UL489 Molded Case Circuit Breakers Versatile, convenient and space saving for a variety of applications Sprecher+Schuh s series of UL are UL489 and CE listed for global applications. The current

More information

SIRIUS Configuration

SIRIUS Configuration SRUS Configuration Selection data for Fuseless Load Feeders Brochure January 2008 www.siemens.com/automation SRUS the Modular System Family for the Switching, rotecting and Starting of s n order to simplify

More information

SIRIUS Shortform Catalogue 2017 siemens.com/sirius

SIRIUS Shortform Catalogue 2017 siemens.com/sirius Industrial Control Products SIRIUS Shortform Catalogue 2017 siemens.com/sirius Content SIRIUS Innovations Industrial Controls 3 SIRIUS 3RW Softstarter 8 SIRIUS 3RP25 Time Relay in 17,5 and 22,5 mm industrial

More information

Motor Circuit Breakers C4

Motor Circuit Breakers C4 Motor protection rating up to 100 Amps Short circuit breaking capacity up to 100kA Phase failure protection DIN rail mounting Wide range of accessories Options and ordering codes Model C4/32T Setting Short

More information

Short-Circuit Current Ratings

Short-Circuit Current Ratings UL 508 Type E Combination Motor Controller, TeSys GV Combination Meeting UL 508 Type E, UL File E164871 Table 2: TeSys GV2P Horsepower and SCCR Ratings In combination with line spacer GV2GH7 (stand-alone

More information

Industrial Controls. Load Feeders. Configuring the SIRIUS Modular System Selection data for Fuseless and Fused Load Feeders. Configuration Manual

Industrial Controls. Load Feeders. Configuring the SIRIUS Modular System Selection data for Fuseless and Fused Load Feeders. Configuration Manual Configuration Manual ndustrial Controls Load Feeders Configuring the SRUS Modular System Selection data for Fuseless and Fused Load Feeders Edition 09/2017 siemens.com ntroduction 1 General information

More information

Combination Starters. SIRIUS 3RA11 Non-Reversing Combination Starters,

Combination Starters. SIRIUS 3RA11 Non-Reversing Combination Starters, Combination Starters SIRIUS 3RA11 Non-Reversing Combination Starters, otor Starter Protectors (MSP) SIRIUS3RV10MSP aeneral Description 3RV10 Motor Starter Protectors (MSP's) are built for a world of applications

More information

A302DN.40/.63A Thermal Current Motor Starter

A302DN.40/.63A Thermal Current Motor Starter 4 South Street 7964-76, TX Nacogdoches Phone: 96-69-794 Fax: 96-60-468 A0DN.40/.6A Thermal Current Motor Starter Eaton Corp A0DN Manufacturer Eaton Corp Description Manual Motor Starter, Motor Protector;

More information

Short form catalogue Motor protection and control Manual motor starters

Short form catalogue Motor protection and control Manual motor starters Short form catalogue Motor protection and control Manual motor starters Motor protection and control Index Contents Beneifits 4 Features 5 Overview 6 Manual motor starter MS116 and MS132 8 Manual motor

More information

Manual. Industrial Controls. Protection Devices. SIRIUS 3RV Motor Starter Protectors. Edition 12/2017. siemens.com

Manual. Industrial Controls. Protection Devices. SIRIUS 3RV Motor Starter Protectors. Edition 12/2017. siemens.com Manual Industrial Controls Protection Devices Edition 12/2017 siemens.com Introduction 1 Standards 2 Industrial Controls Protection devices SIRIUS 3RV Motor Starter Protectors Manual Product description

More information

Short form catalogue. Motor protection & control

Short form catalogue. Motor protection & control Short form catalogue Star Series Motor protection & control Motor Protection and Control up to 25 HP / 600 VAC Overview...2 Contactors and Overload Relays...11 4-pole Contactors...41 Control Relays...59

More information

Order No. of the options EMC filter Class A

Order No. of the options EMC filter Class A Ordering Data for Variant Dependent Options The options listed here (filters, chokes, brake resistors, gland plates, fuses and circuit breakers) are inverter specific. The inverter and the associated options

More information

SENTRON VL Series Product Specifications

SENTRON VL Series Product Specifications SENTRON VL Series Product Specifications VL 400 Frame 400 s Electronic Releases ETU TRIP RELEASE 315 12-315 3VL4731 - A 3-0AA0 400-400 3VL4740 - A 3-0AA0 3 = 3 poles All VL400 circuit-breakers are shipped

More information

Motor Circuit Breakers C3

Motor Circuit Breakers C3 Motor Circuit Breakers C3 Motor protection rating up to 100 Amps Short circuit breaking capacity up to 100kA Phase failure protection DIN rail mounting Wide range of accessories Options and ordering codes

More information

3VT1 Molded Case Circuit Breakers up to 160 A

3VT1 Molded Case Circuit Breakers up to 160 A Siemens AG 4 VT Molded Case Circuit Breakers up to 6 A Catalog Technical Information VT Molded Case Circuit Breakers up to 6 A / General data / Circuit breakers Switch disconnectors Accessories and Components

More information

22AF 40AF AF 150AF 225AF 400AF 800AF

22AF 40AF AF 150AF 225AF 400AF 800AF Contactors MC-Series UL508 E108780 Contactor 3 Pole Standards and Certifications UL508 IEC 60947-2 & IEC 60947-4-2 CSA C22.2 No.14 Features 8 Frame Sizes 1/2HP up to 600HP @ 480V AC Screw Terminals (Lug

More information

SIRIUS 3RV2 motor starter protectors. Electrical Components for the Railway Industry

SIRIUS 3RV2 motor starter protectors. Electrical Components for the Railway Industry Electrical Components for the Railway Industry www.siemens.com/railway-components Introduction Motor Protection Page 2 2014-10-27 Description Motor Protection Description Spring-loaded and screw-type connection

More information

8WH2 Spring-Loaded Terminals

8WH2 Spring-Loaded Terminals 8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25

More information

References 4 Fuse carriers

References 4 Fuse carriers References components 000_ -pole basic blocks Rating Cartridge fuse size umber of early break contacts () Single-phase protection device () Reference () Connection by spring terminals A 0 x 8 () Without

More information

3VT Kompaktleistungsschalter bis 630A

3VT Kompaktleistungsschalter bis 630A Katalog LV 36 AT Österreich - Auszug 2012 3VT Kompaktleistungsschalter bis 630A SENTRON Schutz-, Schalt- und Messtechnik www.siemens.com/lowvoltage 3VT1 Molded Case Circuit Breakers up to 160 A 1 Technical

More information

Electrical Components for the Railway Industry. SIRIUS 3RV2 motor starter protectors

Electrical Components for the Railway Industry. SIRIUS 3RV2 motor starter protectors Electrical Components for the Railway Industry SIRIUS 3RV2 motor starter protectors www.siemens.com/railway-components Introduction Motor Protection Page 2 Description Motor Protection Description Spring-loaded

More information

UMBW-UL489 and UL1077 Listed

UMBW-UL489 and UL1077 Listed -UL489 and UL77 Listed Introducing the New WEG Series Thermal-Magnetic Miniature Breakers. This new offering includes both UL489 and UL77 approvals to provide a solution for circuit & equipment protection

More information

Ideal for use as a manual starter

Ideal for use as a manual starter Manual Motor Starter Ideal for use as a manual starter The is a manual motor starter that employs the features of power switching, thermal overload protection and control circuit signaling in one compact

More information

SENTRON Switching and Protection Devices Switch Disconnectors

SENTRON Switching and Protection Devices Switch Disconnectors SENTRON Switching and Protection Devices Switch Disconnectors /2 Introduction 3K, 3KE, 3LD Switch Disconnectors 3K, 3KE Switch Disconnectors up to 1000 /4 General data /8 Floor mounting 3LD Main and EMERGENCY-STOP

More information

C E R T I F I C A T E O F C O M P L I A N C E

C E R T I F I C A T E O F C O M P L I A N C E Issued to: SIEMENS AG I IA CE CP R&D-VI 4 WERNER-VON-SIEMENS-STRASSE 48 92220 AMBERG, GERMANY This is to certify that representative samples of Motor Controllers, Magnetic USL, CNL - Type No 3RT10, 3RT11,

More information

Technical specifications

Technical specifications Technical specifications Type 3RW30 03 3RW3-1B0 3RW3-1B1 Control electronics Rated control supply voltage V 24 230 CDC 24 CDC (+10 %-15 %) 110 230 CDC (+10 %-15 %) Rated control supply Without fanwith

More information

Index. Manual Motor Starters 1. Auxiliary Contact Blocks 1. Trip Alarm Auxiliary 1. Switch. Shunt Release 1. Under-voltage Release 2.

Index. Manual Motor Starters 1. Auxiliary Contact Blocks 1. Trip Alarm Auxiliary 1. Switch. Shunt Release 1. Under-voltage Release 2. Index Index Page Manual Motor Starters 1 Auxiliary Contact Blocks 1 Trip Alarm Auxiliary 1 Switch Shunt Release 1 Under-voltage Release 2 Accessories 2 Busbar Connectors 2 Enclosures 2 Leistung, kw C mv

More information

Page 2-4 Page 2-8. Page Page 2-13

Page 2-4 Page 2-8. Page Page 2-13 Page -4 Page -8 THREE-POLE CONTACTORS IEC Ith ratings in AC1 duty at 40 C: 16 to 1600A IEC Ie ratings in AC3 440V duty: 6 to 630A IEC Power ratings in AC3 400V duty:. to 335kW UL/CSA ratings: 3 to 500HP

More information

D509E. Manual Motor - Starters

D509E. Manual Motor - Starters D509E Manual Motor - Starters Index Page Manual Motors Starters 182 Auxilliary Contact Blocks 182 Trip Alarm Aux. Switch 182 Shunt Release 182 Under-voltage Release 183 Accessories 183 Busbar Connectors

More information

3RW Soft Starters. General data. 6/4 Siemens LV 1 T 2008

3RW Soft Starters. General data. 6/4 Siemens LV 1 T 2008 General data Overview The advantages of the SIRIUS soft starters at a glance: Soft starting and smooth ramp-down 1) Stepless starting Reduction of current peaks Avoidance of mains voltage fluctuations

More information

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Catalog 0500CT9702R409 2009 Class 525/580 CONTENTS Description............................................. Page General Characteristics...................................

More information

File E47705 Project 97ME August 21, 1997 REPORT. MOTOR CONTROLLERS, MANUAL Amberg, FED REP Germany

File E47705 Project 97ME August 21, 1997 REPORT. MOTOR CONTROLLERS, MANUAL Amberg, FED REP Germany File E47705 Project 97ME18400 August 21, 1997 REPORT on MOTOR CONTROLLERS, MANUAL Amberg, FED REP Germany Copyright 1997 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above

More information