PRODUCT INFORMATION GUIDE

Transcription

1 2017 PRODUCT INFORMATION GUIDE

2 MISSION STATEMENT Exmark Manufacturing was incorporated in May 1982 as an independent manufacturer of professional turf care equipment. The company began its manufacturing operation with seven employees in a garage-type building located just south of Beatrice, Nebraska. In 1983, the company relocated to its present location in the Gage County Industrial Park in Beatrice. At that time, the company focused on manufacturing a line of midsize walk-behind mowers and turf rakes. In 1987, due to the rapidly growing turf care equipment market and the competitive nature of that market, the product line was expanded to include commercial riding mowers. The basis for Exmark's phenomenal growth since 1995 was the introduction of a mid-mount zero-turn riding mower the Exmark Lazer Z. Production began in April of 1995, and it was quickly accepted by turf care professionals as a state-of-the-art machine. Currently, this zero-turn product, built in Beatrice, Nebraska, holds the leading market share in its category in the United States. Another pivotal year for Exmark was Not only did the company celebrate its 15th anniversary, but it also became a division of The Toro Company with corporate headquarters in Bloomington, Minnesota. The added resources of The Toro Company have helped to ensure Exmark's continued growth and market leadership

3 WHAT'S NEW? TABLE OF CONTENTS RADIUS SERIES ZERO-TURN MOWERS The all-new Radius family comes packed with the legendary innovation, durability, reliability and comfort you expect from an Exmark all in a value package. Available in E-, S- and X-Series, each is engineered to provide the highest cutquality and the lowest total ownership and maintenance cost. RED TECHNOLOGY Our advanced Onboard Intelligence Platform optimizes machine life, maximizes productivity, and dramatically increases fuel efficiency. EXMARK ENGINE Now offered exclusively on Quest and Radius E-Series mowers, Exmark s durable, heavy duty 708cc V-Twin engine delivers a number of enhancements you simply won t find on competitive brands. Touting a double-barrel carburetor designed for increased engine performance, self-cleaning airbox that diverts debris for longer filter life, and a quick-andeasy oil drain system for simpler maintenance. SPREADER-SPRAYER Featuring the most advanced lean-to-steer technology imaginable, Exmark s innovative spreader-sprayer provides exceptional hillside stability, easy-to-learn controls... And new profit potential. Model Naming System Deck Construction Step-Up Chart Blade Fit Application Chart Walk-Behinds Stand-Ons Riders Benefits of Eco-Friendly Turf Management Utility Vehicles Accessories and Options Collection Systems Mulch Kit Chart Performance Products Mower Acres-Per-Hour Productivity Engine Specifications Engine Displacement/Horse Power Cross Reference Warranty Information Model Year and Serial Number Charts Exmark Technical Support REAR DISCHARGE DECK Now available with UltraCut rear-discharge cutting deck systems, Lazer Z E-, X-, DS- and Radius Series mowers provide enhanced clipping control, reduced horsepower requirements and, best of all, the superior cut quality we re famous for and that only an Exmark can deliver. QUEST 60" Exmark s continued quest to provide professional-grade performance and cut quality in a residential mower inspired the addition of a 60 cutting deck to our Quest premium residential zero-turn lineup. Packed with pro-grade features, comfort and value, it s perfect for large-property owners looking to get on and off their lawns quicker than ever. CW CCW B M Eco-Friendly Model Clockwise Counter Clockwise Bagging Mulching 2 3

4 MODEL NAMING SYSTEM PRODUCT LINE SERIES ENGINE FUEL SYSTEM ENGINE BRAND OPERATING WIDTH DECK SERIES PACKAGE LZ X 801 G KA EC MG VH LZ PN NV VT QS QT TT SS AR SD UT O E S X G E C A P D KA KC KU SB HN EM AC R A1 A2 A3 A4 B1 B2 B3 BC E0 EP N0 P0 T0 PRODUCT LINE EC = Commercial MG = Metro VH = Viking LZ = Lazer PN = Pioneer RA = Radius NV = Navigator VT = Vantage QS = Quest Front Steer QT = Quest TT = Turf Tracer SS = Spreader Sprayer AR = Aerator SD = Slicer Seeder UT = Utility Vehicle 4 SERIES 0 = No Designation E = E-Series S = S-Series X = X-Series FUEL SYSTEM G = Carburated E = EFI C = Carburated 50 state A = EFI 50 State P = Propane 50 state D = Diesel 50 state ENGINE BRAND KA = Kawasaki KC = Kohler KU = Kubota SB = Subaru HN = Honda EM = Exmark AC = Arctic Cat DECK SERIES 0 = n/a 1 = Stamped Deck 2 = Fabricated Deck 3 = UltraCut Series 3 4 = UltraCut Series 4 5 = Series 5 6 = UltraCut Series 6 R = UltraCut Rear Discharge PACKAGE 00 = Standard Configuration 03 = Standard Seat, Wide Pneumatic A1 = Suspension Seat, Wide Semi-Pneumatic A2 = Suspension Seat, Narrow Semi-Pneumatic A3 = Suspension Seat, Wide Pneumatic A4 = Suspension Seat, Narrow Pneumatic B1 = Suspension Platform, Wide Semi-Pneumatic B2 = Suspension Platform, Narrow Semi-Pneumatic B3 = Suspension Platform, Wide Pneumatic BC = Blade Brake Control E0 = Electric Start EP = Electronic Power Steering N0 = National Account - Sulky, Mulch Kit P0 = Pistol Grip T0 = RED Technology, Suspension Seat 5

5 DECK CONSTRUCTION ULTRACUT SERIES 6 STANDARD ON: LAZER Z X-SERIES MODELS. 5.5" deck depth. No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18" ) diameter spindle shaft. Patented spherical bearing design on idler arm pivots requires only annual greasing. Coned anti-scalp rollers. D OM C E J I K B L H DECK CONSTRUCTION A F G ULTRACUT SERIES 6 FEATURES A. 5.5" deck depth. 4-point suspension. Full-floating. B. (3) 7-gauge steel reinforcement rings at spindle mounting area on 52," 60" & 72." C. High-strength polymer belt covers. D Coned anti-scalp rollers. E. 10-gauge steel top. F. 7-gauge steel side skirt. G. Heavy-duty trim side wear guard. H. No maintenance spindles, sealed and non-greasable. 7.75" diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft. I. 18,500 fpm blade tip speed. J. Patented flow-control baffles. K. Patented spherical bearing design on idler arms requires only annual greasing. L. No-maintenance, sealed ball bearings. M. Flexible discharge chute reduces impact damage of trees and other obstacles. 6 7

6 DECK CONSTRUCTION SERIES 5 STANDARD ON: LAZER Z DS-SERIES WITH SIDE-DISCHARGE 6.0" deck depth. 10-gauge top reinforcement plate and 7-gauge reinforcement rings. No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft. Patented flow-control baffles. Adjustable discharge baffle. Coned anti-scalp rollers. M G E K N F O A H L D B I C J DECK CONSTRUCTION SERIES 5 FEATURES A..6.0" deck depth. 4-point suspension. Full-floating. B. 10-gauge top reinforcement plate and (3) 7-gauge steel reinforcement rings at spindle mounting area. C. No maintenance spindles and sealed and non-greasable. 7.75" diameter cutter housing with 1.75" diameter splined blade driver and 30mm (1.18") diameter spindle shaft. D. Adjustable front blow-out/vacuum baffle. E. Adjustable discharge baffle. F. Metal belt covers. G. Coned anti-scalp rollers. H. 10-gauge steel top. I. 7-gauge steel side skirt. J. Heavy-duty trim side wear guard K. Patented flow-control baffles. L. Patented spherical bearing design on idler arms requires only annual greasing. M..Flexible discharge chute reduces impact damage of trees and other obstacles. N. 18,500 fpm blade tip speed. O..No-maintenance, sealed ball bearings. 8 9

7 DECK CONSTRUCTION ULTRACUT REAR DISCHARGE STANDARD ON: LAZER Z DS-SERIES REAR-DISCHARGE LAZER Z X-SERIES REAR-DISCHARGE LAZER Z E-SERIES REAR-DISCHARGE RADIUS S-SERIES REAR-DISCHARGE 5.5" deck depth. 7-gauge high-strength low-alloy top plate and side-skirts. DS-Series & X-Series - No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30 mm (1.18") diameter spindle shaft. E-Series - No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 25mm- (.98") diameter spindle shaft. Counter rotating blade provides even clipping dispersion. Durable through axle anti-scalp rollers. Optional finish cut baffles. C B H G A I F E D DECK CONSTRUCTION ULTRACUT REAR DISCHARGE FEATURES A. 5.5" deck depth. 4-point suspension. Full-floating. B. 7-gauge high-strength low alloy deck construction. C. High-strength polymer belt covers. D. Reinforced anti-scalp rollers. E. Compression molded UHMW side bumper protects deck and follows ground contours. F. Lazer Z DS-Series & X-Series - No maintenance spindles and sealed and non-greasable. 7.75" diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft. Lazer Z E-Series - No maintenance spindles and sealed and non-greasable. 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. G. 18,500 fpm blade tip speed. H. Patented spherical bearing design on idler arms requires only annual greasing. I. No-maintenance, sealed ball bearings

8 DECK CONSTRUCTION ULTRACUT SERIES 4 STANDARD ON: LAZER Z S-SERIES LAZER Z E-SERIES PIONEER S-SERIES 60" RADIUS X-SERIES TURF TRACER X-SERIES VANTAGE 48," 52" & 60" 5.5" deck depth. Three large, formed and welded 7-gauge steel reinforcement rings on top of 60" & 72" decks provide superior strength and durability excludes LZE 48" & 52" models. No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 1.75" diameter splined blade driver 25mm- (.98") diameter spindle shaft and splined blade driver. Patented spherical bearing design on idler-arm pivots requires only annual greasing. No-maintenance, sealed ball bearings. M L ULTRACUT SERIES 4 FEATURES B H J I K G F D A C E DECK CONSTRUCTION A. 5.5" deck depth. 4-point suspension. Full-floating. B. 10-gauge steel top. C. 7-gauge steel side skirt. D. (3) 7-gauge steel reinforcement rings at spindle mounting area excludes LZE 48" & 52" models. E. Heavy-duty trim side wear guard excludes 48" models. F. No maintenance spindles, sealed and non-greasable. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver. G. 18,500 fpm blade tip speed. H. Patented flow-control baffles. I. Patented spherical bearing design on idler arms requires only annual greasing excludes Pioneer S-Series 60" and Radius X-Series. J. High-strength polymer belt covers. K. No-maintenance, sealed ball bearings. L. Flexible discharge chute reduces impact damage of trees and other obstacles. M. Coned anti-scalp rollers

9 DECK CONSTRUCTION ULTRACUT SERIES 3 STANDARD ON: RADIUS E-SERIES RADIUS S-SERIES PIONEER S-SERIES 48" & 52" VANTAGE 36" TURF TRACER S-SERIES 5.0" deck depth provides Exmark's signature cut. Sealed, greaseless spindles require no maintenance year-round. 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 25mm- (.98") diameter spindle shaft. 10-gauge steel reinforcement plate on Vantage 36" K J B G H F A I D E C DECK CONSTRUCTION STANDARD ON: VIKING 48" METRO 48" 5.0" deck depth, adjusts providing flexibility for varying cutting heights. Sealed, greaseless spindles. 5.40"-diameter cutter housing and 1.0"-diameter spindle tube. (3) 7-gauge steel reinforcement rings at spindle mounting area. ULTRACUT SERIES 3 FEATURES A..5.0" deck depth. 4-point suspension. Full-floating. B. 10-gauge steel top. C. 7-gauge steel side skirt. D. 7-gauge steel reinforcement rings at spindle mounting excludes Pioneer S-Series, Turf Tracer S-Series & Vantage 36" model. E. Radius E- & S-Series (side-discharge)- 7.30"-diameter cutter housing contains 17mm- (.67") diameter spindle shaft and hex blade driver. Pioneer S-Series 48" & 52" and Turf Tracer S-Series 36" & 48", Vantage 36" "-diameter cutter housing with 1.75"-diameter.splined blade driver and 25mm- (.98") diameter spindle shaft..viking 48" and Metro 48" "-diameter cutter housing and 1.0"-diameter spindle tube. F. 18,500 fpm blade tip speed. G..Patented flow-control baffles. H. High-strength polymer belt covers standard on Pioneer S-Series 48" & 52" and Turf Tracer S-Series models. I. No-maintenance, sealed ball bearings. J. Flexible discharge chute reduces impact damage of trees and other obstacles. K. Coned anti-scalp rollers except Metro and Viking 48"

10 DECK CONSTRUCTION ULTRACUT SERIES 2 STANDARD ON: PIONEER E-SERIES 4.0" deck depth provides patented airflow technology. Sealed, greaseless spindles require no maintenance year-round. 7.50"-diameter cutter housing contains 17mm- (.67") diameter spindle shaft and hex blade driver. STANDARD ON: VIKING 36" METRO 32" & 36" I J B G F E H D DECK CONSTRUCTION 5.0" deck depth, adjusts providing flexibility for varying cutting heights. A C Sealed, greaseless spindles require no maintenance year-round. 5.40"-diameter cutter housing and 1.0"-diameter spindle tube. (2) 7-gauge steel reinforcement rings at spindle mounting area. SERIES 2 FEATURES A. Pioneer E-Series - 4.0" deck depth. 4-point suspension. Fullfloating. Viking 36" and Metro 32" & 36" - 5.0" deck depth. Rigid. B. 10-gauge steel top. C. Pioneer E-Series - 10-gauge steel side skirt. Viking 36" and Metro 32" & 36" - 7-gauge steel side skirt. D. Pioneer E-Series "-diameter cutter housing contains 17mm- (.67") diameter spindle shaft and hex blade driver. Viking 36" and Metro 32" & 36" "-diameter cutter housing and 1.0"-diameter spindle tube. E. 18,500 fpm blade tip speed. F. Patented flow-control baffles. G. High-strength polymer belt covers are standard on Pioneer E-Series. H. No-maintenance, sealed ball bearings. I. Flexible discharge chute reduces impact damage of trees and other obstacles. J. Coned anti-scalp rollers

11 DECK CONSTRUCTION SERIES 1 & SERIES 2 STANDARD ON: QUEST E-SERIES QUEST S-SERIES 4.0" deck depth with top discharge design. Top discharge design enhances bagging performance. Sealed, greaseless spindles require no maintenance year-round. 5.50"-diameter cutter housing with 17mm-diameter spindle shaft. Easily removable for cleaning and service. DECK CONSTRUCTION SERIES 1 STAMPED DECK FEATURES. STANDARD ON QUEST E-SERIES. F A. 4.0"-deck depth. 3-point suspension. Floating. B. 42" unit - 2 blade, 13-gauge stamped steel. C. Rolled deck edges for additional strength. D. 5.50"-diameter cutter housing with 17mm-diameter spindle shaft. Sealed, greaseless spindle bearings require no maintenance year-round. E. 18,500 fpm blade tip speed. F. Composite discharge chute reduces impact damage of trees and other obstacles. G. Round anti-scalp rollers. H. Clean-out port. G C B A E D H SERIES 2 FABRICATED DECK FEATURES. STANDARD ON QUEST S-SERIES. E A. 4.0"-deck depth. 3-point suspension. Floating. B. 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded front bumper. C. 5.50"-diameter cutter housing with 17mm-diameter spindle shaft. Sealed, greaseless spindle bearings require no maintenance year-round. D. 18,500 fpm blade tip speed. E. Composite discharge chute reduces impact damage of trees and other obstacles. F. Round anti-scalp rollers. F B A D C G G. Clean-out port

12 DECK CONSTRUCTION SPINDLE DESIGN & CONSTRUCTION Series 5 & UltraCut Series 6 Spindle Features Standard on: Lazer Z DS-Series Lazer Z X-Series A. 7.75"-diameter cast aluminum spindle housing. B. Double-rowed, dual triple lip seal, high-speed ball bearing assemblies, non-greasable. C. 30 mm spindle shaft diameter at bearing. D. Splined blade driver eliminates self tightening from impacts. E. Spindle nut minimizes moisture from entering the spindle internals, retains bearing clamp load when servicing drive pulley. UltraCut Series 2, 3 & 4 Spindle Features Standard on: Viking Metro A. 5.40"-diameter cast aluminum spindle housing. B. Dual-sealed, high-speed bearing assemblies, non-greasable. C. 1.0" spindle shaft diameter at bearing. D. Spindle cap minimizes moisture from entering the spindle internals. E. Spindle cavity is filled with grease to reduce condensation and moisture ingestion. DECK CONSTRUCTION F. Completely serviceable. C C A E A D E B B F D 20 21

13 DECK CONSTRUCTION SPINDLE DESIGN & CONSTRUCTION UltraCut Series 3 & 4 Spindle Features Standard on: Lazer Z S-Series Lazer Z E-Series Pioneer S-Series Radius S-Series (rear-discharge) Radius X-Series Turf Tracer X-Series Turf Tracer S-Series Vantage A. 7.75"-diameter cast aluminum spindle housing. B. Dual-sealed, high-speed bearing assemblies,.non-greasable. C. 25 mm spindle shaft diameter at bearing. D. Splined blade driver eliminates self tightening from impacts. UltraCut Series 3 Spindle Features Standard on: Fig. 1 Radius E-Series Radius S-Series (side-discharge) Fig. 2 Pioneer E-Series A. Radius "-diameter cast aluminum spindle housing. Pioneer E-Series "-diameter cast aluminum spindle housing. B. Dual-sealed, high-speed bearing assemblies, non-greasable. C. 17mm diameter spindle shaft at bearing. D. Hex blade driver eliminates self tightening from impacts. DECK CONSTRUCTION E. Spindle cap minimizes moisture from entering the spindle internals. F. Spindle cavity is vented to reduce condensation and moisture ingestion. Fig. 1 C C A E B A F D C Fig. 2 B A D B D 22 23

14 STEP-UP CHART STEP-UP QTE QTS/QSS RAE RAS RAX LZE LZS LZX ENGINE Exmark Exmark Exmark Kohler HYDRO DRIVE SYSTEM DECK SPINDLE ZT2100 (42") ZT2200 (50") Series 1 4" deck depth Series 2 4" deck depth 5.5" diameter 17 mm shaft ZT2200 (34"/42") ZT2800 (50"/60") Series 2 4" deck depth 5.5" diameter 17 mm shaft ZT2800 (48"/52") ZT-3100 (60") UltraCut Series 3 5" deck depth 7.3" diameter 17 mm shaft ZT-3100 (Side- Discharge) ZT-3400 (Rear- Discharge) UltraCut Series 3 5" deck depth Rear Discharge 5.5" deck depth 7.3" diameter 17 mm shaft (Side-Discharge) 7.5" diameter 17 mm shaft (Rear-Discharge) Kawasaki FX Heavy-duty air filter ZT3400 UltraCut Series 4 5.5" deck depth 7.75" diameter 25 mm shaft Kawasaki FX Kohler Heavy-duty air filter UHT 12cc w/o fans 60"/72" unit w/ fans UltraCut Series 4 5.5" deck depth Rear Discharge 5.5" deck depth (60"/72") 7.75" diameter 25 mm shaft Kawasaki FX Kohler Heavy-duty air filter UHT 12cc w/ fans UltraCut Series 4 5.5" deck depth 7.75" diameter 25 mm shaft Kawasaki FX Kohler Heavy-duty air filter UHT 12 & 16cc w/ fans UltraCut Series 6 5.5" deck depth Rear Discharge 5.5" deck depth (60"/72") 7.75" diameter 30 mm shaft STEP-UP SEAT 18" High Back No armrests 18" Deluxe Commercial High-Back Deluxe w/ Seat Isolation System Premium Suspension w/ Seat Isolation System Commercial High-Back A1/A2 models have premium suspension seat Deluxe w/ Seat Isolation System all units except A1/A2 models with premium suspension seat w/ seat isolation system Premium Suspension w/ Seat Isolation System FRONT TIRES DRIVE TIRES FUEL CAPACITY 11 x 4.0 (42") 13 x (50") pneumatic 18 x (42") 18 x 9.5 (50") 11 x 4.0 (34"/42") 13 x 5.0 (50") pneumatic 18 x (34") 18 x (42") 20 x (50") 20 x (60") 13 x pneumatic 22 x (48"/52") 22 x (60") 13 x pneumatic 23 x (48"/52") 23 x (60") 13 x pneumatic 24 x (48"/52") 24 x (60") 13 x semi-pneumatic 13 x semipneumatic on A1 models 23 x (48"/52") 24 x (60"/72") 2.9 gal. 2.9 gal. 7.0 gal. 7.0 gal. 7.0 gal. 8.0 gal. SPEED 7.0 mph 7.0 mph 8.0 mph 9.0 mph 10.0 mph WARRANTY 30 Days Commercial 3 Year Consumer 30 Days Commercial 3 Year Consumer 4-Year/500 Hours 4-Year/750 Hours 8.0 mph (48"/52") 10.0 mph (60"/72") 13 x (48"/52") 13 x (60"/72") semi-pneumatic 23 x (48"/52") 24 x (60"/72") 12.0 gal. gas 10.3 gal. propane 10.0 mph 13 x (52") 13 x 6.5 (60"/72") semi-pneumatic 23 x (52") 24 x (60"/72") 12.0 gal mph ( 52") 11.5 mph ( 60/72") 4-Year/1,000 Hours 5-Year/1,250 Hours 5-Year/1,250 Hours 5-Year/1,500 Hours 24 25

15 BLADE FIT APPLICATION CHART Model Deck Width Deck Model Blade Length Blade Hole Serial Number High Lift Notched High Lift Solid Extreme2 Medium Low Lift Mulch Optional BLADES 21" 30" Metro 21" Metro 26" Metro, Viking Hydro Viking 5S Standard 5S Variable 21" 21 EC21 21" 21" M21 21" 26" M26 26' 5/8" 30" EC " 32" 48" 36" 52" " 5/8" Lower 29,999 n/a n/a n/a n/a n/a 850,000 Higher 220,000 Higher 510,000 Higher 313,000,000 Higher n/a mulch n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a All n/a 18.00" All n/a BLADES Vantage S & X Turf Tracer S & X Turf Tracer 5S TTHP MHP Explorer 48" " 36" 52" 60" " 20.50" 44" CD " 5/8" 15/16" 130, , ,000 Higher n/a n/a 1/2" Lower 129, n/a n/a 5/8" 15/16" 130, , ,000 Higher n/a n/a 1/2" Lower 129, n/a n/a 5/8" 15/16" 130, , ,000 Higher 1/2" Lower 129,999 5/8" 130,000 Higher n/a n/a LH n/a n/a n/a n/a n/a RH n/a n/a n/a n/a n/a LH n/a n/a n/a n/a n/a RH n/a n/a n/a n/a n/a Explorer 52" CD " 1/2" Lower 129,999 5/8" 130,000 Higher LH n/a n/a LH n/a n/a RH n/a n/a RH n/a n/a LH n/a n/a n/a n/a RH n/a n/a n/a n/a 44" CD " All n/a n/a n/a n/a n/a n/a Navigator 52" CD " 42" 42CD 22.00" 48" 48CD 25.00" 1/2" Lower 129, n/a n/a n/a n/a n/a 5/8" 130,000 Higher 510,000 Higher 510,000 Higher n/a n/a n/a n/a n/a LH n/a n/a LH n/a n/a RH n/a n/a RH n/a n/a LH n/a n/a LH n/a n/a RH n/a n/a RH n/a 26 Bold = Standard B=Bagging M=Mulching CW = Clockwise CCW = Counter Clockwise 27

16 BLADE FIT APPLICATION CHART BLADES 28 Model Lazer Z HP Lazer Z CT Phazer Quest S-Series Quest E-Series Quest SP Pioneer E-Series Pioneer S-Series Radius Lazer Z AS, ASX, XP XS, E, S, X, D, DS FrontRunner Pioneer RD Turf Ranger Vantage S & X Radius RD Deck Width 34" 42" Deck Model Blade Length Blade Hole Serial Number High Lift Notched High Lift Solid Extreme2 Medium Low Lift Mulch Optional " 5/8" 600,000 Higher n/a n/a " 5/8" " 15/16" ' " 5/8" 21.60" 5/8" /8" 46" " 15/16" 48" 34" 50" 52" ,000,000 Higher 790, , , ,999, ,000,000 Higher 160, ,999 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a N/A n/a n/a 15/16" 540,000 Higher n/a 22.25" 15/16" 850,000 Higher n/a n/a n/a 16.25" " 5/8" 15/16" 5/8" /16" " 5/8" 54" " 5/8" 600,000 Higher 160, , ,000 Higher 920,000 Higher 600, , , , n/a n/a B M n/a n/a n/a n/a n/a 15/16" 540,000 Higher ,000,000 Higher B M n/a n/a n/a 56" " 15/16" 600,000 Higher n/a 60" 48" 52" 60" " 400,010,500 n/a n/a n/a " 15/16" 600,000 Higher n/a 16.25" 15/16" 18.00" 20.50" 790,000 Higher n/a 1/2" Lower 129, n/a n/a 5/8" 15/16" 130, , ,000 Higher n/a n/a 1/2" Lower 129, n/a n/a 5/8" 15/16" 130, , ,000 Higher n/a n/a 60" " 15/16" 600,000 Higher n/a 66" " 15/16" 600,000 Higher n/a 72" " 5/8" 190, , n/a 15/16" 540,000 Higher n/a 72" " 15/16" 600,000 Higher n/a 60" 60RD 20.50" 15/16" 72" 72RD 24.50" 15/16" 313,000,000 Higher 313,000,000 Higher n/a CW n/a CW n/a CW n/a CW CCW CW CCW CW CCW CW CCW CW Bold = Standard B=Bagging M=Mulching CW = Clockwise CCW = Counter Clockwise 29 n/a n/a n/a n/a n/a n/a n/a n/a BLADES

17 COMMERCIAL 21 S-SERIES Model Number Engine Controls Size Weight Length with Handle Height with handle 1 Width Price ECS180GKA21000 FJ180V Kawasaki Self-Propelled Zone 21" 112 lbs 62.0" 38.0" 22.0" $ QUICK REFERENCE BLADES 2 (QTY) 21"(1) High Lift Solid WHEELS Front Drive 9" (standard) " BELTS Drive Extreme Low-Lift Medium/Mulch Mulching CABLES Zone (Kawasaki) Drive WALKS WALKS 1 varies with 0.5" cutting selections. KEY FEATURES Commercial grade and performance in a value-packaged trim and finish mower. Simple design for maximum balance and ease of maneuverability. 5"-deep cutting deck provides Exmark signature cut and superior performance whether bagging or mulching. Easy on/off bag design eliminates the need for levers and doors. Innovative and durable front height adjustment replacing traditional pivot style adjusters. Single-point rear height adjustment allows operator to quickly change cutting height. See page 165 for Exmark warranty details 2 material is 0.135" thick alloy steel austempered to RC ACCESSORIES & ATTACHMENTS Coated Bail Drive Deck Wear Kit Door Handle Kit Engine Guard " Diameter Tire Kit Mulch Plug Wheel Weight Kit For more information on Accessories see page SPECIFICATIONS Engine FJ180V Kawasaki engine governed to 3,300 rpm. Air Filter Dual element air cleaner. Engine Deck 5"-deep, 1/4"-thick die-cast aluminum. Drive System Self-propelled; rear-wheel, gear-driven. Transmission Infinitely variable speed selection, dual wheel drive. Speed 0 to 4.2 mph (6.4 kmph) forward. Speed Control Fingertip control. Fuel Capacity 2 quart integral fuel tank. Style Fixed-deck, rear-discharge bagger standard with option to mulch. Width Available 21" (53.3 cm). Cutting Height 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. Blade-Tip Speed Approximately 18,500 fpm. Blades 1 blade at 20.5". Drive Tires 9" x 2.5", semi-pneumatic. Safety Package Zone start. Bag Capacity 2.5 bushels (20 gallons)

18 COMMERCIAL 21 X-SERIES Model Number Engine Controls Size Weight Length with Handle Height with handle 1 Width Price ECX180CKA21000 FJ180V Kawasaki KAI Self-Propelled Zone 21" 114 lbs 62.0" 38.0" 22.0" $ ECX160CHN21000 GXV160 Honda Self-Propelled Zone 21" 112 lbs 62.0" 38.0" 22.0" $ ECX180CKA210BC FJ180V Kawasaki KAI Self-Propelled BBC 21" 115 lbs 62.0" 38.0" 22.0" $ WALKS QUICK REFERENCE WHEELS Front Drive 9" (standard) " BELTS Drive BBC BLADES 2 (QTY) 21"(1) High Lift Solid Extreme Low-Lift Medium/Mulch Mulching CABLES Zone (Honda) Zone (Kawasaki) BBC Drive Throttle WALKS 1 varies with 0.5" cutting selections. 2 material is 0.135" thick alloy steel austempered to RC KEY FEATURES Commercial performance and durability. 5" deep cutting deck provides Exmark signature cut and superior performance whether bagging or mulching. Innovative and durable front height adjustment replacing traditional pivot style adjusters. Single-point rear height adjustment allows operator to quickly change cutting height. Blade Brake Clutch (BBC) enables operator to disengage blades without shutting down the engine. Front engine guard protects valve cover and head gasket from being damaged on trailers and helps when lifting. Formed, steel-wear plates, are strategically placed on the edges of the cutting deck to ensure that the deck is not damaged from impacts and abrasions. Drive and OPC bails are foam-coated to minimize vibration and fatigue. Mulch plug and rear door handle standard. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 9.5" Diameter Tire Kit Wheel Weight Kit For more information on Accessories see page SPECIFICATIONS Engine FJ180V Kawasaki KAI engine governed to 3,300 rpm; GXV160 Honda engine governed to 3,300 rpm. Air Filter Dual element air cleaner. Engine Deck 5"-deep, 1/4"-thick die-cast aluminum. Drive System Self-propelled; rear-wheel gear-driven. Transmission Infinitely variable speed selection, dual wheel drive. Speed 0.0 mph to 4.2 mph (6.6 kmph) forward. Speed Control Fingertip control. Fuel Capacity 1 gallon (3.8-L). Style Fixed-deck, rear-discharge bagger and mulch plug standard. Width Available 21" (53.3 cm). Cutting Height 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. Blade-Tip Speed Approximately 18,500 fpm. Blades 1 blade at 20.5". Drive Tires 9" x 2.5", semi-pneumatic. Safety Package Zone start/blade Brake Clutch (BBC). Bag Capacity 2.5 bushels (20 gallons)

19 COMMERCIAL 30 Model Number Engine Controls Size Weight Length with Handle 2 Height with handle 2 Width Price ECS180CKA30000 FJ180V Kawasaki KAI Self-propelled 30" 170 lbs 68.0" 38.25" 31.9" $ 2 With handle in medium position. Varies with 0.5" cutting selections. QUICK REFERENCE BLADES (QTY) 30"(2) BELTS 30" CABLES 30" WALKS High-Lift Notched Low-Lift Tranmission Blade Clutch Blade Drive Drive BBC WALKS KEY FEATURES Improve productivity, increase control and manage costs with a deceptively light walk-behind mower. Positive drive transmission holds side-hills and helps prevent downhill "run-away". Unit weighs more than a 21", but operator will not see additional fatigue in operation due to balance of unit and increased coverage. Innovative and durable front height adjustment replacing traditional pivot style adjusters. Single-point rear height adjustment allows operator to quickly change cutting height. Self-tensioning belt drive to transmission eliminates need for service adjustments and prolongs belt life. Welded steel cutting deck - constructed with 1/2" dia. side wear bars and 1" dia. bumper to protect front end and deck with metal side discharge cover. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS High-Performance Mulch Kit For more information on Accessories see page SPECIFICATIONS Engine FJ180V Kawasaki KAI engine; governed to 3,500 rpm. Air Filter Dual element air cleaner. Engine Deck 4.6"-deep stamped steel with welded reinforcement. Drive System Self-propelled, rear-wheel gear-driven. Transmission Infinitely variable speed selection. Speed 0.0 mph to 4.2 (6.6 kmph) mph forward. Speed Control Finger-tip control. Fuel Capacity 1 gallon (3.8-L) fuel tank. Style Fixed-deck. Ability to rear bag, side-discharge or mulch. Width Available 30" (76 cm). Cutting Height 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.5" (1.3 cm) increments. Blade-Tip Speed Approximately 18,500 fpm. Blades 2 blades at 15.4". Front Tires 9 x 2.5, semi-pneumatic. Drive Tires 10 x 3.0, semi-pneumatic. Safety Package Blade Brake Clutch (BBC). Bag Capacity 2.5 bushels (20 gallons)

20 E N H A N C E D C O N T R O L S Y S T E M METRO Model Number Engine Controls Size Deck Weight Length Height MGS481GKA322P0 MGS481CKA36200 MGS481CKA48300 FS481V Kawasaki V-Twin FS481V Kawasaki V-Twin FS481V Kawasaki V-Twin Pistol 32" ECS 36" ECS 48" UltraCut Series 2 UltraCut Series 2 UltraCut Series 3 Width Defl. Down Width Defl. Up 421 lbs 78.0" 40.0" 43.3" 32.7" $ 456 lbs 77.3" 42.1" 47.0" 36.4" $ 506 lbs 72.3" 42.1" 57.9" 48.1" $ Price WALKS WALKS KEY FEATURES High-clearance, well-balanced deck makes curb climbing and trailering easier. Choose from Exmark 's exclusive Enhanced Control System (ECS) or traditional pistol grip operator controls. Drive belts can be changed quickly and easily without the use of tools. Drive-wheel pulleys and brake drums are designed for simple, low-cost maintenance. Molded discharge chute standard. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 3-Bushel Bagger... GC3602 ECS Conversion Kit for Metro Equipment Cover - Large Mulching Kits 32" unit... MK322 36" unit... MK362 48" unit... MK483Q Operator Controlled Discharge For more information on Accessories see page

21 METRO QUICK REFERENCE BLADES (QTY) 32"(2) 36"(2) 48"(3) High Lift Notched High Lift Solid Low Lift Mulch* Extreme *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel BELTS 32" 36" 48" Transmission Mower Drive Blade Drive MISC ECS Conversion Kit DRIVE WHEELS Wheel & Tire Tire Only Complete Assembly* WALKS SEMI-PNEUMATIC CASTER WHEELS Complete WALKS 1 Single belt. *Includes sheave and brake drum POWER COMPONENTS Engines FS481V Kawasaki V-Twin engine governed to 3,600 rpm. Air Filter Standard Engine Manufacturer's air filter. Drive System Direct drive from transmission to double-belt wheel drives (single belt on 32"). Transmission 5-speed Peerless A. Speed Control Padded shift lever. Ground Speed 2.0 mph (3.2 kmph) to 6.2 mph (10 kmph) forward, reverse assist. PTO Engagement Mechanical blade engagement with blade brake. Fuel Capacity 5-gallon (18.9-L) fuel tank. Drive Wheel Release Gearbox in neutral allows unit movement without engine running. Deck Lift Manual cutter housing and front caster spacer position adjustment. DECKS Style Fixed-deck, side-discharge standard with molded discharge chute and option to bag or mulch. UltraCut Series 2 on 32" and 36" units and UltraCut Series 3 on 48" unit. Widths Available 32" (81.3 cm), 36" (91.4 cm) or 48" (121.9 cm). Deck Construction 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. Cutting Height 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.64 cm) increments. Blade Spindles No maintenance, sealed and non-greasable spindles; 5.40"-diameter cutter housing and 1.0 -diameter spindle tube. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Engine Deck 7-gauge welded steel. Steering and Motion Control Gear drive with pistol grip, forward/ reverse assist or gear drive with Enhanced Control System (ECS), forward/reverse assist. Casters.38" thick caster yoke arms. Front Caster Tires Double-yoke, 9 x 3.5-4, smooth-tread, semipneumatic. Drive Tires 32": 13 x 5.0-6, 4-ply Kenda Super Turf; 36" and 48": 13 x 6.5-6, 4-ply Kenda Super Turf. Turning Radius True zero-turn. Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator s position without stopping engine. Mechanical Parking Brake Standard. Brake bands

22 E N H A N C E D C O N T R O L S Y S T E M VIKING Model Number Engine Controls Size Deck Weight Length Height VHS481GKA36200 VHS481GKA48300 FS481V Kawasaki V-Twin FS481V Kawasaki V-Twin ECS 36" ECS 48" UltraCut Series 2 UltraCut Series 3 Width Defl. Down Width Defl. Up 481 lbs 77.3" 43.2" 47.0" 36.4" $ 531 lbs 72.3" 43.2" 57.9" 48.1" $ Price WALKS WALKS KEY FEATURES Features Exmark 's exclusive Enhanced Control System (ECS). High-clearance, well-balanced deck makes curb climbing and trailering easier. Molded discharge chute is standard. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 3-Bushel Bagger...GC3602 Equipment Cover - Large Weight Kit Mulching Kits 36" unit...mk362 48" unit...mk483q Operator Controlled Discharge StandOn For more information on Accessories see page

23 VIKING QUICK REFERENCE WALKS BLADES (QTY) 36"(2) 48"(3) High Lift Notched High Lift Solid Low Lift Mulch* Extreme *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel All Units All Units MISC Above 32 F Below 32 F Hydro Oil Filter SEMI-PNEUMATIC CASTER WHEELS Complete BELTS 36" 48" Pump Drive A-Section Blade Drive DRIVE WHEELS All 36" and 48" with s/n 439,999 & below and 790,000 & above Hub Tire Only Rim Only Complete " s/n 440,000 to 789,000 Tire Only Rim Only Complete WALKS POWER COMPONENTS Engines FS481V Kawasaki V-Twin engine governed to 3,600 rpm. Drive System Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable selection from mph (10.0 kmph) forward, mph (3.5 kmph) reverse. PTO Engagement Mechanical blade engagement with blade brake. Fuel Capacity 5-gallon (18.9-L) fuel tank. Drive-Wheel Release Allows unit movement without engine running. Deck Lift Manual cutter housing and front caster spacer position adjustment. DECKS Style Fixed-deck, side-discharge standard with molded discharge chute and option to bag or mulch. UltraCut Series 2 on 36" unit and UltraCut Series 3 on 48" unit. Widths Available 36" (91.4 cm) or 48" (121.9 cm). Deck Construction 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. Cutting Height 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.54 cm) increments. Blade Spindles No maintenance, sealed and non-greasable spindles; diameter cutter housing and 1.0 -diameter spindle tube. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Engine Deck 7-gauge, heavy-duty welded steel. Steering and Motion Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. Casters.38" thick caster yoke arms. Front Caster Tires Double-yoke, 9 x , smooth-tread, semipneumatic. Drive Tires 16 x 6.5-8, 4-ply Turf Master. Tracking Adjustment Insta-Track. Turning Radius True zero-turn. Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator s position without stopping engine. Parking Brake Lever-actuated mechanical compression

24 E N H A N C E D C O N T R O L S Y S T E M TURF TRACER S-SERIES Model Number Engine Controls Size Deck Weight Length Height Width Defl. Down Width Defl. Up TTS481CKA36300 FS481V Kawasaki V-Twin ECS 36" UltraCut Series lbs 77.7" 42.0" 47.5" 36.1" $ TTS481GKA48300 FS481V Kawasaki V-Twin ECS 48" UltraCut Series lbs 73.7" 42.0" 59.5" 48.1" $ TTS600GKA483E0 FS600V Kawasaki V-Twin Electric Start ECS 48" UltraCut Series lbs 73.7" 42.0" 59.5"" 48.1" $ TTS680PKC483E0 PCV680 Kohler EFI Electric Start Propane ECS 48" UltraCut Series lbs. 73.7" 42.0" 59.5"" 48.1" $ TTS541GKA52300 FS541V Kawasaki V-Twin ECS 52" UltraCut Series lbs 75.9" 42.0" 64.3" 53.0" $ TTS600GKA523E0 FS600V Kawasaki V-Twin Electric Start ECS 52" UltraCut Series lbs 75.9" 42.0" 64.3" 53.0" $ Price WALKS WALKS KEY FEATURES Ground speeds up to 6.2 mph forward and 2.2 mph in reverse. Features Exmark s exclusive Enhanced Control System (ECS). Electric-start standard on FS600V engines and PCV650 Kohler Propane. Standard with 9 x smooth tread, semi-pneumatic front caster tires. Large-capacity electromagnetic PTO clutch delivers maximum life and durability. Molded discharge chute is standard. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 3-Bushel Bagger (36" requires adapter)...gc3602 Equipment Cover - Large Weight Kit Mulching Kits 36" unit " unit " unit...mk523q Operator Controlled Discharge (36" requires adapter) Operator Controlled Discharged adapter StandOn Turf Striping Kit 36" unit " & 52" unit For more information on Accessories see page

25 TURF TRACER S-SERIES QUICK REFERENCE WALKS BLADES (QTY) 36"(2) 48"(3) 52"(3) High Lift Notched Solid Lift Solid Low Lift Mulch* Extreme *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel All Units All Units MISC Above 32 F Below 32 F Hydro Oil Filter SEMI-PNEUMATIC CASTER WHEELS Complete BELTS 36" 48" 52" Pump Drive Deck Drive DRIVE WHEELS All 36" and 48" & 52" with s/n 919,999 & under Hub Tire Only Rim Only Complete All 36" and 48" & 52" with s/n 920,000 & above Tire Only Rim Only Complete WALKS POWER COMPONENTS Engines FS481V, FS541V, & FS600V Kawasaki V-Twin; PCV680 Kohler EFI Propane. All engines are governed to 3,600 rpm. Air Filter Standard Engine Manufacturer's air filter. Drive System Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable selection from mph (10.0 kmph) forward, mph (3.5 kmph) reverse. PTO Engagement Magstop Electromechanical 105 ft lb clutch on gas models, 125 ft lb on propane model. Fuel Capacity 5-gallon (18.9-L) fuel tank. Propane unit has 20.0-lb (4.8 gallon) propane tank. Drive-Wheel Release Allows unit movement without engine running. Deck Lift Manual lift with hairpin from hole to hole for position adjustment. DECKS Style Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. Widths Available 36" (91.4 cm), 48" (121.9 cm) or 52" (132 cm). Deck Construction 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. Cutting Height 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with diameter splined blade drive and 25mm (0.98") diameter spindle shaft. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Engine Deck 7-gauge, heavy-duty welded steel. Steering and Motion Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. Casters.38" thick caster yoke arms. Front Caster Tires Double-yoke, 9 x 3.5-4, smooth tread, semipneumatic. Drive Tires 16 x 6.5-8, 4-ply Turf Master on 36" models; 16 x 7.5-8, 4-ply Turf Master on all 48" and 52" models. Tracking Adjustment Insta-Track. Turning Radius True zero-turn. Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator s position without stopping engine. Parking Brake Lever-actuated mechanical compression. Electrical System Electric start models 12-volt battery, 15-amp alternator except for PCV680 has 20-amp alternator. Recoil start models - 5-amp clutch coil

26 E N H A N C E D C O N T R O L S Y S T E M TURF TRACER X-SERIES Model Number Engine Controls Size Deck Weight Length Height Width Defl. Down Width Defl. Up Price TTX650EKC52400 TTX680PKC52400 TTX650EKC60400 TTX650EKC604N0 TTX680PKC60400 TTX691CKA60400 ECV650 Kohler EFI Electric Start PCV680 Kohler EFI Electric Start Propane ECV650 Kohler EFI Electric Start ECV650 Kohler EFI Electric Start PCV680 Kohler EFI Electric Start Propane FX691V Kawasaki V-Twin Electric Start ECS 52" ECS 52" ECS 60" ECS 60" ECS 60" ECS 60" UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 UltraCut Series lbs 84.8" 45.0" 64.8" 53.4" $ 740 lbs 84.8" 45.0" 64.8" 53.4" $ 760 lbs 84.8" 45.0" 73.0" 61.4" $ 840 lbs 104.8" 45.0" 73.0" 61.4" $ 780 lbs 84.8" 45.0" 72.0" 61.4" $ 760 lbs 84.8" 45.0" 72.0" 61.4" $ WALKS WALKS KEY FEATURES Features Exmark s exclusive Enhanced Control System (ECS). Standard with heavy-duty canister air filtration systems. Large-capacity electromagnetic PTO clutch delivers maximum life and durability. Electric-start engines standard. Standard with 11 x smooth tread, semi-pneumatic, front caster tires. Molded discharge chute is standard. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 3-Bushel Bagger...GC3602 Equipment Cover - Large Mulching Kits 52" unit...mk526 60" unit...mk606 Operator Controlled Discharge Rear Anti-Scalp Roller Kit StandOn Turf Striping Kit 52" and 60" unit For more information on Accessories see page

27 TURF TRACER X-SERIES QUICK REFERENCE BLADES (QTY) 52"(3) 60"(3) High Lift Notched Solid Lift Solid Low Lift Mulch* Extreme *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel BELTS 52" 60" Pump Drive A-Section Deck Drive WALKS All Units All Units MISC Above 32 F Below 32 F Hydro Oil Filter DRIVE WHEELS s/n 320,000 & above Hub Tire Only Rim Only Complete SEMI-PNEUMATIC CASTER WHEELS Complete WALKS POWER COMPONENTS Engines FX691V Kawasaki V-Twin; ECV650 Kohler EFI; PCV680 Kohler Command EFI Propane. All engines governed to 3,600 rpm. Air Filter Heavy-duty canister air filtration system. Drive System Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts. Hydro Fluid Exmark Premium Hydro Oil. Speed Infinitely variable selection from mph (10.9 kmph) forward, mph (3.6 kmph) reverse. PTO Engagement MagStop Electromagnetic 200 ft-lbs clutch. Fuel Capacity 5-gallon (18.9-L) fuel tank. Propane unit has 33.5-lb (8.0 gallon) propane tank. Drive-Wheel Release Allows unit movement without engine running. Deck Lift Manual lift with hairpin from hole to hole for position adjustment. DECKS Style Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Widths Available 52" (132 cm) or 60" (152.4 cm). Deck Construction 10-gauge top that is formed and continuously seam-welded, with 10-gauge top reinforcement plate, 7-gauge side skirt and 7-gauge reinforcement rings at spindle assembly. 4-point suspension, full-floating deck with 6 adjustable anti-scalp rollers. Cutting Height 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. Blade Spindles No maintenance, sealed and non-greasable spindles; 7.25"-diameter cutter housing with 1.75"-diameter splined blade drive and 25mm (0.98") diameter spindle shaft. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Engine Deck 7-gauge, heavy-duty welded steel. Steering and Motion Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. Casters.38" thick caster yoke arms. Front Caster Tires Double-yoke, 11 x 4.0-5, smooth tread, semipneumatic. Drive Tires 18 x 8.5-8, 4-ply Turf Master. Tracking Adjustment Insta-Track. Turning Radius True zero-turn. Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator s position without stopping engine. Parking Brake Lever-actuated mechanical compression. Electrical System 12-volt battery, 15-amp alternator, except for Kohler EFI has 20-amp alternator. Engine Hour Meter Standard

28 VANTAGE S-SERIES Model Number Engine Size Deck Weight VTS541CKA36300 FS541V Kawasaki V-Twin VTS691CKA48400 FX691V Kawasaki V-Twin VTS691CKA52400 FX691V Kawasaki V-Twin VTS730AKC52400 ECV730 Kohler Command EFI VTS740PKC52400 PCV740 Kohler EFI Propane VTS740PKC60400 PCV740 Kohler EFI Propane VTS740EKC60400 ECV740 Kohler Command EFI Length Platform Up Length Platform Down Height Width Defl. Down Width Defl. Up 36" UltraCut Series lbs 61.5" 74.0" 51.5" 48.0" 39.1" $ 48" UltraCut Series lbs 60.5" 74.0" 50.0" 59.6" 51.8" $ 52" UltraCut Series lbs 60.5" 74.0" 50.0" 64.8" 56.3" $ 52" UltraCut Series lbs 60.5" 74.0" 50.0" 64.8" 56.3" $ 52" UltraCut Series lbs 60.5" 74.0" 50.0" 64.8" 56.3" $ 60" UltraCut Series lbs 62.4" 75.9" 50.0" 72.8" 63.9" $ 60" UltraCut Series lbs 62.4" 75.9" 50.0" 72.8" 63.9" $ Price STAND-ON KEY FEATURES Ergonomically designed steering system includes an Adjustable Front Reference bar that can control the top end speed of the machine. Self-compensating suspension makes standing more comfortable. Platform folds up, allowing the machine to function like a walk-behind. Superior traction and handling allows you to mow changing landscapes effortlessly. Angled platform sides allow operator to shift his body weight for smoother ride when mowing hillsides. Precision-designed, maintenance-free spindles eliminate the need for yearly greasing. Integrated tie-down points for secure trailering. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 3-Bushel Bagger...GC " requires adapter for bagger and OCD Propane requires adapter for bagger Anti-Scalp Roller Kit (36" unit - right front corner) (48" & 52" units - front of deck) (60" unit - left rear of deck) Cup Holder Equipment Cover - Large Front Weight Kit Jack Jack Mount Receiver 36" unit "/52"60" units Light Kit Mulching Kits 36" unit " unit...mk486 52" unit...mk526 60" unit...mk606 Operator Controlled Discharge Trash Container For more information on Accessories see page STAND-ON 52 53

29 VANTAGE S-SERIES QUICK REFERENCE BLADES (QTY) 36"(2) 48"(3) 52"(3) 60"(3) High Lift Notched Solid Lift Solid Low Lift Mulch* Extreme *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel BELTS 36" 48" 52" 60" Pump Drive Blade Drive DRIVE WHEELS Wheel & Tire Wheel Only Tire Only All Units All Units MISC Above 32 F Below 32 F Hydro Oil Filter FRONT CASTER WHEELS Rim Only n/a n/a n/a n/a Tire Only n/a n/a n/a n/a Complete STAND-ON POWER COMPONENTS Engines FS541V and FX691V Kawasaki V-Twin; ECV730 and ECV740 Kohler Command EFI, PCV740 Kohler EFI Propane engines. All engines governed to 3,600 rpm. Air Filter Heavy-duty canister air filtration system. Drive System Two Hydro-Gear 10cc pumps powering two Parker 12 cubic inch motors. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection mph (12.9 kmph) forward, mph (6.4 kmph) reverse. PTO Engagement Warner 175-ft-lb clutch on 36" unit. Warner 200- ft-lb clutch on 48", 52" and 60" units. Fuel Capacity 8-gallon, (30.2-L) single fuel tank with single fill location. Propane unit has 33.5-lb (8.0 gallon) propane tank. Drive-Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators. Deck Lift Standard. Mechanical lift-assist springs. DECKS Style Full-floating UltraCut Series 3 on 36" unit and full-floating UltraCut Series 4 on 48", 52" and 60" units. Side-discharge standard with molded discharge chute and option to bag or mulch. Widths Available 36" (91 cm), 48" (122 cm), 52" (132 cm) and 60" (152 cm). Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. 4-point suspension. Cutting Height 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position. Blade Spindles No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver 25mm (0.98") diameter spindle shaft. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel. Suspension Platform Self-compensating elastomeric suspension. Stowable operator platform. Steering and Motion Control Twin levers with no-tools adjustable front reference bar to modify forward ground speed. Casters.38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Front Caster Tires 11 x 4.0-5, smooth-tread, semi-pneumatic tires. Drive Tires 18 x Kenda Tires on 36" unit; 20 x Kenda drive tires on 48", 52" and 60" units. Turning Radius True zero-turn. Parking Brake Lever-actuated bar brake. Electrical System 12-volt battery with 15-amp alternator on Kawasaki. 20-amp on Kohler EFI. Engine Hour Meter Standard. Cup Holder Optional. STAND-ON 54 55

30 E N H A N C E D C O N T R O L S Y S T E M VANTAGE X-SERIES Model Number Engine Controls Size Deck Weight VTX651GKA48400 FX651V Kawasaki V-Twin ECS 48" VTX730EKC52400 ECV730 Kohler EFI ECS 52" VTX740EKC60400 ECV740 Kohler EFI ECS 60" UltraCut Series 4 UltraCut Series 4 UltraCut Series 4 Length Platform Up Length Platform Down Height Width Defl. Down Width Defl. Up 855 lbs 60.5" 74.0" 50.0" 59.6" 51.8" $ 875 lbs 60.5" 74.0" 50.0" 64.8" 56.3" $ 883 lbs 62.5" 76.0" 50.0" 72.8" 63.9" $ Price STAND-ON KEY FEATURES Now comes with our patented Enhanced Control System (ECS) for greater operator comfort and productivity. Hydraulic drive system upgraded on X-Series to 12cc pump and 14 cubic inch wheel motor. Self-compensating suspension makes standing more comfortable. Platform folds up, allowing the machine to function like a walk-behind. Superior traction and handling allows you to mow changing landscapes effortlessly. Angled platform sides allow operator to shift his body weight for smoother ride when mowing hillsides. Precision-designed, maintenance-free spindles eliminate the need for yearly greasing. Integrated tie-down points for secure trailering. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 3-Bushel Bagger...GC3602 Anti-Scalp Roller Kit 48" & 52" units - front of deck " unit - left rear corner Cup Holder Equipment Cover - Large Front Weight Kit Jack Jack Mount Receiver Light Kit Mulching Kits 48" unit...mk486 52" unit...mk526 60" unit...mk606 Operator Controlled Discharge 52" & 60" unit Trash Container For more information on Accessories see page STAND-ON 56 57

31 VANTAGE X-SERIES QUICK REFERENCE BLADES (QTY) 48"(3) 52"(3) 60"(3) High Lift Notched Solid Lift Solid Low Lift Mulch* Extreme *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel BELTS 48" 52" 60" Pump Drive Blade Drive DRIVE WHEELS Wheel & Tire Wheel Only Tire Only All Units All Units MISC Above 32 F Below 32 F Hydro Oil Filter FRONT CASTER WHEELS Rim Only n/a n/a n/a Tire Only n/a n/a n/a Complete STAND-ON POWER COMPONENTS Engines FX651V Kawasaki V-Twin; ECV730 & ECV740 Kohler EFI engines. All engines governed to 3,600 rpm. Drive System Two Hydro-Gear 12cc pumps powering two Parker 14 cubic inch motors. Air Filter Heavy-duty canister air filtration system. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection mph (12.9 kmph) forward, mph (6.4 kmph) reverse. PTO Engagement Warner 200-ft-lb clutch. Fuel Capacity 8-gallon, (30.2-L) single fuel tank with single fill location. Drive-Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators. Deck Lift Standard. Mechanical lift-assist springs. DECKS Style Full-floating UltraCut Series 4, side-discharge standard with molded discharge chute and option to bag or mulch. Widths Available 48" (122 cm) and 52" (132 cm) and 60" (152 cm). Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. 4-point suspension. Cutting Height 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position. Blade Spindles No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver 25mm (0.98") diameter spindle shaft. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel. Suspension Platform Self-compensating elastomeric suspension. Stowable operator platform. Steering and Motion Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. Casters.38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Front Caster Tires 11 x 4.0-5, smooth-tread, semi-pneumatic tires. Drive Tires 20 x Kenda drive tires. Turning Radius True zero-turn. Parking Brake Lever-actuated bar brake. Electrical System 12-volt battery with 15-amp alternator on Kawasaki units. 12-volt battery with 20-amp alternator on Kohler EFI unit. Engine Hour Meter Standard. Cup Holder Optional. STAND-ON 58 59

32 QUEST E-SERIES Model Number Engine Size Deck Weight Length Height Width Defl. Down Width Defl. Up QTE452CEM cc Exmark 42" Series 1 stamped 511 lbs 71.8" 40.7" 53.8" 45.3" $ Price QTE708GEM cc Exmark 42" Series 2 fabricated 555 lbs 71.8" 40.7" 54.1" 43.2" $ QTE708GEM cc Exmark 50" Series 2 fabricated 630 lbs 72.9" 42.9" 61.7" 50.6" $ KEY FEATURES Deck is easily removed for servicing. Hydrostatic control: Hydro-gear ZT2100 (42") and ZT2200 (50"). Lever-actuated park braking system. Standard engine guard for extra protection. Spring-supported seat for operator comfort. 3-gallon fuel tank with single fill location. Ground speeds up to 7 mph. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 2-Bagger Collection System 42" unit Series 1 (requires Weight Kit & Mounting Kit) " unit Series " unit Bagger Mount Kit Anti-Blowout Ring Kit 42" unit Series " unit Series " unit Armrest Kit Bar and Step Assist Kit Cargo Carrier (Requires Weight Kit) Engine Maintenance Kit Single-Cylinder V-Twin Equipment Cover - Small Hitch Kit Hour Meter Jack Jack Mount Receiver Mulching Kit 42" unit Series " unit Series " unit Rubber Floor Mat Trash Container Turf Striping Kit 42" unit Series " unit Series " Weight Kit For more information on Accessories see page

33 QUEST E-SERIES BLADES (QTY) 421 (2) 422 (2) 502 (3) High Lift Solid Extreme 2 n/a n/a n/a Low Lift/Mulch* *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel QUICK REFERENCE BELTS " 502 Pump Drive Blade Drive DRIVE WHEELS Rim Only Tire Only Complete CASTER WHEELS Rim Only n/a n/a Tire Only Complete POWER COMPONENTS Engines 452cc Exmark and 708cc Exmark V-Twin, governed to 3,300 rpm. Air Filter Standard Engine Manufacturer's air filter. Drive System Dual hydro static transmission with no hoses and integrated cooling fans and integrated reservoir. Hydro-Gear ZT2100 on 42" unit. Hydro-Gear ZT2200 on 50" unit. Hydro Fluid Exmark Premium Hydro oil on 50" unit. Speed Infinitely variable speed selection from mph (11.3 kmph) forward mph (5.5 kmph) reverse. PTO Engagement MagStop electromagnetic 80-ft-lbs clutch on 42". MagStop electromagnetic 105-ft-lbs clutch on 50". Fuel Capacity 3.0-gallon (11.0-L) single fuel tank with single fill location. Drive-Wheel Release Standard - allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock. Deck Lift Standard. Hand lever lift. DECKS Style Exmark Series 1 stamped steel deck. Series 2 fabricated and welded steel deck. Both decks have side-discharge standard with the option to bag or mulch. Widths Available 42" (107 cm) and 50" (127 cm). Deck Construction 42" Series 1 unit has 13-gauge stamped steel deck shell. Formed spindle mounting locations for improved strength and reduced weight. 3 point suspension. Series 2 units have 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension. Cutting Height 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard hand lever lift. Blade Spindles No maintenance, sealed and non-greasable spindles. 5.50"-diameter cutter housing with 17mm- (.67") diameter spindle shaft. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Unibody, riveted 10-gauge steel. Steering and Motion Control Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 2-height positions. Casters.25" thick caster yoke arms. Front Caster Tires 11 x 4-5 ribbed tread, pneumatic on 42" unit. 13 x 5-6 ribbed tread, pneumatic on 50" unit. Drive Tires 18 x , 4-ply Turf Tech TL on 42" unit. 18 x , 4-ply Turf Tech TL on 50" unit. Turning Radius True zero-turn. Parking Brake Lever-actuated pawl brake. Seat Units have 18" high-back foam padded seat (no armrests). Hinged mounting with spring suspension. Adjustment fore and aft 3" by loosening 2 bolts and sliding seat. Electrical 12-volt battery with 15-amp alternator. Engine Hour Meter Optional. Cup Holder Standard

34 QUEST S-SERIES DRIVE LEVERS Model Number Engine Size Deck Weight Length Height Width Defl. Down Width Defl. Up Price QTS452CEM cc Exmark 34" Series 2 fabricated 520 lbs 74.7" 45.4" 45.6" 34.7" $ QTS708GEM cc Exmark 42" Series 2 fabricated 561 lbs 71.8" 40.7" 54.1" 43.2" $ QTS708GEM cc Exmark 50" Series 2 fabricated 638 lbs 72.9" 42.9" 61.7" 50.6" $ QTS708GEM cc Exmark 60" Series 2 fabricated 728 lbs 82.1" 42.9" 75.2" n/a $ KEY FEATURES Deck is easily removed for servicing. Lever-actuated park braking system. Standard engine guard for extra protection. Spring-supported seat for operator comfort. 3-gallon fuel tank with single fill location. Ground speeds up to 7 mph. Rubber floor mat is standard. Engine hour meter and hitch kit is standard. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 2-Bagger Collection System 34" unit " unit " unit " unit Bagger Mount Kit Anti-Blowout Kit 34" unit " unit "/60" unit Bar and Step Assist Kit Cargo Carrier (Requires Weight Kit) Engine Maintenance Kit Single-Cylinder V-Twin Equipment Cover 34"/42"/50" Small " Large Jack Jack Mount Receiver Rubber Floor Mat Mulching Kit 34" unit " unit " unit " unit Trash Container Turf Striper 34" unit " unit " unit Weight Kit For more information on Accessories see page

35 QUEST S-SERIES DRIVE LEVERS QUICK REFERENCE BLADES (QTY) 34"(2) 42"(2) 50"(3) 60" High Lift Solid Low Lift Mulch* *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel BELTS 34" 42" 50" 60" Pump Drive Blade Drive DRIVE WHEELS Rim Only Tire Only Complete MISC 50" Hydro Oil Filter CASTER WHEELS Rim Only Tire Only Complete POWER COMPONENTS Engines 452cc, 708cc Exmark engines, governed to 3,300 rpm. Air Filter Standard Engine Manufacturer's air filter. Drive System Dual Hydro-Gear ZT2200 hydro static transmissions with no hoses, integrated cooling fans, integrated reservoir on 34"/42" unit. Dual Hydro-Gear ZT2800 hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components on 50"/60" models. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection from mph (11.3 kmph) forward mph (5.5 kmph) reverse. PTO Engagement MagStop electromagnetic 80-ft-lbs clutch on 34"/42" unit. MagStop electromagnetic 105-ft-lbs clutch on 50"/60" models. Fuel Capacity 2.9-gallon (11.0-L) single fuel tank. Drive-Wheel Release Standard - allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock. Deck Lift Standard. Hand lever lift. Foot-assist lifts the deck to maneuver around obstacles. DECKS Style Exmark Series 2 fabricated and welded steel deck. Sidedischarge standard with the option to bag or mulch. Widths Available 34" (86 cm) 42" (107 cm), 50" (127 cm) 60" 152 (cm). Deck Construction 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension. Cutting Height 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard hand lever or foot-operated assist. Blade Spindles No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17mm- (.67") diameter spindle shaft. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Unibody, riveted 10-gauge steel. Steering and Motion Control Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 2-height positions. Casters.25" thick caster yoke arms. Front Caster Tires 11 x 4-5 ribbed tread, pneumatic on 34"/42" unit. 13 x 5-6 ribbed tread, pneumatic on 50" unit. 13 x 6.5-6, smooth pneumatic on 60" unit. Drive Tires 18 x 6-8, 4-ply Turf Tech TL on 34" unit. 18 x , 4-ply Turf Tech TL on 42" unit. 20 x 10-10, 2-ply Turf Tech TL on 50"/60" units. Turning Radius True zero-turn. Parking Brake Lever-actuated pawl brake. Seat Commercial-grade, high-back contoured foam padded with armrests. Hinged mounting and spring suspension. Adjustment is fore and from operator position. Electrical 12-volt battery with 15-amp alternator. Engine Hour Meter Standard. Cup Holder Standard. Hitch Standard

36 QUEST S-SERIES FRONT STEER Model Number Engine Size Deck Weight Length Height Width Defl. Down Width Defl. Up Price QSS708GEM cc Exmark 42" Series 2 fabricated 645 lbs 81.7" 42.8" 54.1" 43.2" $ QSS708GEM cc Exmark 50" Series 2 fabricated 713 lbs 81.7" 42.8" 61.7" 50.6" $ KEY FEATURES Deck is easily removed for servicing. Smart Park - The park brake engages automatically whenever the operator gets off the seat, or when the key switch is shut off. The brake disengages simply by depressing the foot pedal. Key Choice - This advanced safety feature allows the operator to select whether or not to utilize the cutting deck in reverse. If the key is removed, the deck will become disengaged in reverse. Standard engine guard for extra protection. Spring-supported seat for operator comfort. 3-gallon fuel tank with single fill location. Ground speeds up to 7 mph. Engine hour meter and hitch kit is standard. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 2-Bagger Collection System 42" unit " unit Bagging Mounting Kit Anti-Blowout Kit 42" unit " unit Engine Maintenance Kit Equipment Cover - Small Jack Jack Mount Receiver Mulching Kit 42" unit " unit Rubber Floor Mat Turf Striper 42" unit " unit For more information on Accessories see page

37 QUEST S-SERIES FRONT STEER QUICK REFERENCE BLADES (QTY) 42"(2) 50"(3) High Lift Solid Low Lift Mulch* *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel BELTS 42" 50" Pump Drive Blade Drive DRIVE WHEELS Rim Only Tire Only Complete MISC 50" Hydro Oil Filter CASTER WHEELS Rim Only Tire Only Complete POWER COMPONENTS Engines 708cc Exmark engine, governed to 3,300 rpm. Air Filter Standard Engine Manufacturer's air filter. Drive System Dual Hydro-Gear ZT2200 hydro static transmissions with no hoses, integrated cooling fans, integrated reservoir on 42" unit. Dual Hydro-Gear ZT2800 hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components on 50" unit. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection from mph (11.3 kmph) forward mph (5.5 kmph) reverse. PTO Engagement MagStop electromagnetic 80-ft-lbs clutch on 42" unit. MagStop electromagnetic 105-ft-lbs clutch on 50" unit. Fuel Capacity 3.0-gallon (11.0-L) single fuel tank. Drive-Wheel Release Standard - allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock. Deck Lift Standard. Lever lift. Foot-assist lifts the deck to maneuver around obstacles. Key Choice Standard. Allows the operator to select whether or not to utilize the cutting deck in reverse. If the key is removed, the deck will become disengaged in reverse. DECKS Style Exmark Series 2 fabricated and welded steel deck. Sidedischarge standard with the option to bag or mulch. Widths Available 42" (107 cm) and 50" (127 cm). Deck Construction 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension. Cutting Height 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard footoperated assist. Blade Spindles No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17mm- (.67") diameter spindle shaft. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Unibody, riveted 10-gauge steel. Steering and Motion Control Steering wheel controls direction of front casters and independent hydraulic transaxles in a turn for maximum control. Steering column is adjustable to operator preference. Casters.25" thick caster yoke arms. Front Caster Tires 11 x 4-5 ribbed tread, pneumatic on 42" unit. 13 x 5-6 ribbed tread, pneumatic on 50" unit. Drive Tires 18 x , 4-ply Turf Tech TL on 42" unit. 20 x , 4-ply Super Turf on 50" unit. Turning Radius True zero-turn. Parking Brake The park brake engages automatically whenever the operator gets off the seat, or when the key switch is shut off. The brake disengages simply by depressing the foot pedal. Seat Commercial-grade, high-back contoured foam padded with armrests. Hinged mounting and spring suspension. Adjustment is fore and from operator position. Electrical 12-volt battery with 15-amp alternator. Engine Hour Meter Standard. Cup Holder Standard. Hitch Standard

38 RADIUS E-SERIES Model Number Engine Size Deck Weight Length Height Width Defl. Down Width Defl. Up Price RAE708GEM cc Exmark 48" UltraCut Series lbs 81.7" 69.7" 59.5" 52.6" $ RAE708GEM cc Exmark 52" UltraCut Series lbs 81.7" 69.7" 64.3" 57.3" $ RAE708GEM cc Exmark 60" UltraCut Series lbs 82.2" 69.7" 72.3" 61.7" $ KEY FEATURES Patented cutting-deck design yields professional results. Hydro-Gear ZT2800 on 48"/52" and ZT3100 on 60" hydrostatic drive system delivers a smooth drive experience and years of reliable service. Every Radius model is equipped with large, 13" x 6.5" pneumatic tires front caster tires. Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models. Intergrated rear tow hitch standard on all Radius models. Easy to Service A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. The welded jack receiver allows quick access to the underside of the deck when combined with the optional jack. See page 165 for Exmark warranty details 72 ACCESSORIES & ATTACHMENTS 3-Bushel Bagger (Accessory Adapter needed for 48"/52")... GC3602 Accessory Adapter (48"/52") Engine Maintenance Kit Equipment Cover - Large Front Bucket Mount Kit Front Bucket Mount Gallon Bucket Hydro Maintenance Kit Jack Light Kit Mulching Kits 48" unit...mk483q 52" unit... MK523Q 60" unit...mk603q Operator Controlled Discharge Seat Cover - Standard Seat Cover - Suspension (fits ) Semi-Pneumatic Tire Assembly Sun Shade Suspension Seat Suspension Seat Kit Seat Suspension Upgrade Kit Trash Container Turf Striper UltraVac E-Series (2-Bagger Powered Collection System) Fits all units UltraVac E-Series Completing Kits 48" " " UltraVac S-Series (2-Bagger Commercial-Grade Powered Collection System) Fits all units UltraVac S-Series Completing Kits 48" " " For more information on Accessories see page

39 RADIUS E-SERIES QUICK REFERENCE BLADES (QTY) 48"(3) 52"(3) 60"(3) Notched Air Foil Solid Air Foil Low Lift Mulching* extreme 2 Mulching *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel BELTS 48" 52" 60" Pump Drive Blade Drive DRIVE WHEELS Rim Only Tire Only Complete MISC All Units Hydro Oil Filter PNEUMATIC TIRE ASSEMBLY Rim Only n/a n/a n/a Tire Only Complete POWER COMPONENTS Engine 708cc Exmark engine; governed to 3,600 rpm. Air Filter Standard engine manufacturer s air filter. Drive System Dual Hydro Gear ZT2800 on 48" & 52" models. Dual Hydro Gear ZT3100 on 60" model. All have hydrostatic transmission with charge pumps, relief valves and independent, spin-on filter. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection from mph (12.9 kmph) forward, mph (8.0 kmph) reverse. PTO Engagement MagStop electromagnetic 125-ft-lb clutch. Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location. Drive-Wheel Release Standard - allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators. Rollover Protection System (ROPS) 2-post foldable ROPS standard with seat belt and latch. Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. DECKS Style Full-floating, UltraCut Series 3. Side-discharge standard with molded discharge chute and the option to bag or mulch. Widths Available 48" (122 cm) 52" (132 cm) and 60" (152 cm). Deck Construction 10-gauge top that is formed and continuously seam welded and 7-gauge side skirt on all units. Adjustable, antiscalp rollers. Cutting Height 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator seat. Blade Spindles No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm-(.67") diameter spindle shaft and hex blade drive. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel. Steering and Motion Control Hydraulically dampened twin levers adjustable both fore and aft. Levers are also adjustable to 2-height positions. Casters 0.375"-thick caster yoke arms. Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Drive Tires 22 x on 48" & 52" models. 22 x on 60" model. Turning Radius True zero-turn. Parking Brake Lever-actuated pawl brake. Seat High back seat with foam padded seat cushion, armrests and integral safety switch. Electrical 12-volt battery with 15-amp alternator. Engine Hour Meter Standard. Cup Holder Standard. Tow Hitch Standard. Jack Receiver Standard

40 RADIUS S-SERIES Model Number Engine Size Deck Weight Length Height Width Defl. Down Width Defl. Up Price RAS710CKC48300 ZT710 Kohler 48" UltraCut Series lbs 81.7" 70.2" 59.5" 52.6" $ RAS720CKC52300 ZT720 Kohler 52" UltraCut Series lbs 81.7: 70.2" 64.3" 57.3" $ RAS740CKC60300 ZT740 Kohler 60" UltraCut Series lbs 82.2" 70.2" 72.3" 61.7" $ RAS740GKC60R00 ZT740 Kohler 60" UltraCut Rear Discharge 1012 lbs 84.3" " n/a $ KEY FEATURES Patented cutting-deck design yields professional results. Hydro-Gear ZT3100 (side-discharge) and ZT3400 (reardischarge) hydrostatic drive system delivers a smooth drive experience and years of reliable service. Exclusive adjustable isolation technology which helps to increase operator isolation from vibration and bumps. Every Radius model is equipped with large, 13" x 6.5" pneumatic tires front caster tires. Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models. Intergrated rear tow hitch standard on all Radius models. Easy to Service A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. The welded jack receiver allows quick access to the underside of the deck when combined with the optional jack. See page 165 for Exmark warranty details 76 ACCESSORIES & ATTACHMENTS Engine Maintenance Kit - Kohler Equipment Cover - Large Front Bucket Mount Kit Front Bucket Mount Gallon Bucket Hydro Maintenance Kit Jack Light Kit Seat Cover - Suspension Semi-Pneumatic Tire Assembly Sun Shade Suspension Seat Kit Trash Container SIDE-DISCHARGE ONLY 3-Bushel Bagger (Accessory Adapter needed for 48"/52")...GC3602 Accessory Adapter (48"/52") Mulching Kits 48" unit...mk483q 52" unit...mk523q 60" unit...mk603q Operator Controlled Discharge Turf Striper UltraVac E-Series (2-Bagger Powered Collection System) Fits all units UltraVac E-Series Completing Kits 48" " " UltraVac S-Series (2-Bagger Commercial-Grade Powered Collection System) Fits all units UltraVac S-Series Completing Kits 48" " " REAR-DISCHARGE ONLY Finish Cut Baffles Side Wear Bar Kit with front anti-scalp roller White non-marking side bumper For more information on Accessories see page

41 RADIUS S-SERIES BLADES (QTY) 48"(3) 52"(3) 60"(3) 60" Rear(3) Notched Air Foil CW (2) Solid Air Foil n/a Low Lift CCW CW Mulching* n/a extreme 2 Mulching CCW (1) CW *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel MISC All Units Hydro Oil Filter QUICK REFERENCE BELTS 48" 52" 60" 60" Rear Pump Drive Blade Drive Right Blade Drive n/a n/a n/a DRIVE WHEELS Rim Only Tire Only Complete PNEUMATIC TIRE ASSEMBLY Rim Only n/a n/a n/a n/a Tire Only Complete CW = Clockwise CCW = Counter Clockwise POWER COMPONENTS Engines ZT710, ZT720 and ZT740 Kohler engines; governed to 3,700 rpm. Air Filter Heavy-duty canister air filtration system. Drive System Dual Hydro Gear ZT3100 on side-discharge units. Dual Hydro Gear ZT3400 on rear discharge unit. Hydrostatic transmission with charge pumps, relief valves and spin-on filter. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection from mph (14.5 kmph) forward, mph (8.0 kmph) reverse. PTO Engagement MagStop electromagnetic 125-ft-lb clutch. Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location. Drive-Wheel Release Standard - allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators. Rollover Protection System (ROPS) 2-post foldable ROPS standard with seat belt and latch. Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. DECKS Style Full-floating 5.0"-deep UltraCut Series 3. Side-discharge standard with molded discharge chute and option to bag or mulch. Rear-discharge decks have UltraCut Rear Discharge cutting deck with option to mulch. Widths Available 48" (122 cm) 52" (132 cm) and 60" (152 cm). Deck Construction 10-gauge top that is formed and continuously seam welded and 7-gauge side skirt on all units. Adjustable, antiscalp rollers. Cutting Height 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator seat. Blade Spindles No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67 ) diameter spindle shaft and hex blade drive on side-discharge. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver on rear-discharge. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel. Steering and Motion Control Hydraulically dampened twin levers adjustable both fore and aft. Levers are also adjustable to 2-height positions. Casters 0.375"-thick caster yoke arms. Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Drive Tires 23 x on 48" & 52" models. 23 x on 60" models. Turning Radius True zero-turn. Parking Brake Lever-actuated pawl brake. Seat High back seat with foam padded seat cushion, armrests, integral safety switch, and adjustable Seat Isolation System. Electrical 12-volt battery with 15-amp alternator. Engine Hour Meter Standard. Cup Holder Standard. Tow Hitch Standard. Jack Receiver Standard

42 RADIUS X-SERIES Model Number Engine Size Deck Weight Length Height Width Defl. Down Width Defl. Up Price RAX651GKA484A3 FX651V Kawasaki 48" UltraCut Series lbs 81.7" 70.4" 59.5" 52.6" $ RAX691GKA524A3 FX691V Kawasaki 52" UltraCut Series lbs 81.7" 70.4" 64.6" 57.3" $ RAX730GKA604A3 FX730V Kawasaki 60" UltraCut Series lbs 82.2" 70.4" 72.7" 61.7" $ KEY FEATURES Patented cutting-deck design yields professional results. Hydro-Gear ZT3400 hydrostatic drive system delivers a smooth drive experience and years of reliable service. Full suspension seating system, with three inches of adjustable vertical suspension. Every Radius model is equipped with large, 13" x 6.5" pneumatic tires front caster tires. Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models. Intergrated rear tow hitch standard on all Radius models. Easy to Service A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. The welded jack receiver allows quick access to the underside of the deck when combined with the optional jack. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 3-Bushel Bagger (Accessory Adapter needed for 48"/52")...GC3602 Accessory Adapter (48"/52") Engine Maintenance Kit - Kawasaki Equipment Cover - Large Front Bucket Mount Kit Front Bucket Mount Hydro Maintenance Kit Gallon Bucket Jack Light Kit Mulching Kits 48" unit...mk486 52" unit...mk526 60" unit...mk606 Operator Controlled Discharge Seat Cover - Suspension Semi-Pneumatic Tire Assembly Sun Shade Trash Container Turf Striper UltraVac E-Series (2-Bagger Powered Collection System) Fits all units UltraVac E-Series Completing Kits 48" " " UltraVac S-Series (2-Bagger Commercial-Grade Powered Collection System) Fits all units UltraVac S-Series Completing Kits 48" " " For more information on Accessories see page

43 RADIUS X-SERIES QUICK REFERENCE BLADES (QTY) 48"(3) 52"(3) 60"( ) Notched Air Foil Solid Air Foil Low Lift Mulching* extreme 2 Mulching *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel BELTS 48" 52" 60" Pump Drive Blade Drive DRIVE WHEELS Rim Only Tire Only Complete MISC All Units Hydro Oil Filter PNEUMATIC TIRE ASSEMBLY Rim Only n/a n/a n/a Tire Only Complete POWER COMPONENTS Engines FX651V, FX691V and FX730V Kawasaki engines; governed to 3,700 rpm. Air Filter Heavy-duty canister air filtration system. Drive System Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and spin-on filter. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection from mph (16.1 kmph) forward, mph (9.7 kmph) reverse. PTO Engagement MagStop electromagnetic 125-ft-lb clutch. Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location. Drive-Wheel Release Standard - allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators. Rollover Protection System (ROPS) 2-post foldable ROPS standard with seat belt and latch. Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. DECKS Style Full-floating 5.5"-deep UltraCut Series 4. All models have sidedischarge standard with molded discharge chute and option to bag or mulch. Widths Available 48" (122 cm) 52" (132 cm) and 60" (152 cm). Deck Construction 10-gauge top that is formed and continuously seam welded and 7-gauge side skirt on all units. 7-gauge spindle mounting. Adjustable, anti-scalp rollers. Cutting Height 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator seat. Blade Spindles No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel. Steering and Motion Control HHydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 2-height positions. Casters 0.375"-thick caster yoke arms. Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Drive Tires 24 x on 48" & 52" models. 24 x on 60" model. Turning Radius True zero-turn. Parking Brake Lever-actuated pawl brake. Seat Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch. Electrical 12-volt battery with 15-amp alternator. Engine Hour Meter Standard. Cup Holder Standard. Tow Hitch Standard. Jack Receiver Standard

44 2016 PIONEER E-SERIES Model Number Engine Size Deck Weight Length Height Width Defl. Down Width Defl. Up Price PNE651GKA48200 FR651V Kawasaki 48" UltraCut Series lbs 78.0" 71.0" 60.0" 48.2" $ PNE691GKA52200 FR691V Kawasaki 52" UltraCut Series lbs 78.0" 71.0" 64.0" 52.8" $ KEY FEATURES Patented cutting-deck design yields professional results. Hydro-Gear ZT2800 hydrostatic drive system delivers a smooth drive experience and years of reliable service. Foot-operated Quick Height Adjust System allows fast and easy height adjustments. Seat position optimized for comfort and improved center of gravity. Anti-scalp rollers allow the deck to contour the ground to prevent scalping. Spring-supported seat for operator comfort. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 2-Bagger Collection System Equipment Cover - Large Full-Suspension Seat Hitch Kit Jack Jack Mount Receiver Light Kit Mulching Kits 48" unit " unit " High Lift Bagger Blade " High Lift Bagger Blade Sun Shade Trash Container...TC26 For more information on Accessories see page

45 2016 PIONEER E-SERIES QUICK REFERENCE BLADES (QTY) 48"(3) 52"(3) Notched Air Foil Solid Air Foil Low Lift Mulching* extreme 2 Mulching *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel BELTS 48" 52" Pump Drive Blade Drive DRIVE WHEELS Rim Only Tire Only Complete MISC All Units Hydro Oil Filter PNEUMATIC TIRE ASSEMBLY Rim Only Tire Only Complete POWER COMPONENTS Engines FR651V and FR691V Kawasaki engines; governed to 3,600 rpm. Air Filter Standard engine manufacturer s air filter. Drive System Dual Hydro-Gear ZT2800 hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection from mph (11.3 kmph) forward, mph (6.4 kmph) reverse. PTO Engagement MagStop electromagnetic 125-ft-lb clutch. Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location. Drive-Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators. Rollover Protection System (ROPS) 2-post foldable ROPS standard with seat belt and latch. Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Cutting Height 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator seat. Blade Spindles No maintenance, sealed and non-greasable spindles; 7.50"-diameter cutter housing contains 17mm-(.67") diameter spindle shaft and hex blade drive. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Steering and Motion Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment. Casters 0.38"-thick caster yoke arms. Front Caster Tires 13 x 5.0-6, smooth tread, pneumatic. Drive Tires 20 x Super Turf drive tires. Turning Radius True zero-turn. Parking Brake Lever-actuated pawl brake. Seat Commercial-grade, high-back contoured foam padded with armrests. Hinged mounting with spring suspension. Adjustment is fore and aft from operator s position. Electrical 12-volt battery with 15-amp alternator. Engine Hour Meter Standard. Cup Holder Standard. DECKS Style Full-floating, UltraCut Series 2. Side-discharge standard with molded discharge chute and the option to bag or mulch. Widths Available 48" (122 cm) and 52" (132 cm). Deck Construction 10-gauge top that is formed and continuously seam welded and 10-gauge side skirt. 4-point suspension, fullfloating deck with 3 adjustable, anti-scalp rollers

46 2016 PIONEER S-SERIES Model Number Engine Size Deck Weight Length Height Width Defl. Down Width Defl. Up PNS710GKC48300 ZT710 Kohler V-Twin 48" UltraCut Series lbs 78.0" 71.3" 60.0" 50.7" $ PNS720GKC52300 ZT720 Kohler V-Twin 52" UltraCut Series lbs 78.0" 71.3" 65.0" 54.2" $ PNS730GKA604A3 FX730V Kawasaki 60" UltraCut Series lbs 79.0" 71.3" 73.0" 61.4" $ PNS740GKC60400 ZT740 Kohler V-Twin 60" UltraCut Series lbs 79.0" 71.3" 73.0" 61.4" $ PNS740GKC604A4 ZT740 Kohler V-Twin 60" UltraCut Series lbs 79.0" 71.3" 73.0" 61.4" $ PNS740GKC60RA3 ZT740 Kohler V-Twin 60" UltraCut Rear Discharge 842 lbs 80.8" 72.0" 66.2" n/a $ Price KEY FEATURES Now available with a rear-discharge deck. Patented cutting-deck design yields professional results. Seat position optimized for comfort and improved center of gravity. Foot-operated Quick Height Adjust System allows fast and easy height adjustments. Anti-scalp rollers allow the deck to trace the contour of the terrain, which helps prevent turf scalping. Rear-sloping foldable ROPS standard. Heavy-duty canister air filtration system on Kawasaki that improves engine life, simplifies maintenance and boosts overall productivity. 4-ply 13 x 5 front caster wheels for increased durability with heavyduty axles and bearings. Spring-supported seat for operator comfort except for A3/A4 models which have full suspension seat standard. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS Deck Lift Assist - Fits 60" Equipment Cover - Large Full Suspension Seat Hitch Kit Jack Jack Mount Receiver Light Kit Sun Shade Trash Container, 2.5-gallon capacity...tc26 SIDE-DISCHARGE ONLY Mulching Kits 48" Unit...MK483Q 52" Unit...MK523Q 60" Unit...MK606 UltraVac E-Series (2-Bagger Powered Collection System) Fits all units UltraVac Completing Kits 48" unit " unit " unit Bushel Bagger - Fits 52" & 60" units...gc3602 Anti-Scalp Roller Kit - Fits 60" unit Turf Striping Kit REAR-DISCHARGE ONLY Finish Cut Baffles Side Wear Bar Kit with front anti-scalp roller White non-marking side bumper For more information on Accessories see page

47 2016 PIONEER S-SERIES QUICK REFERENCE BLADES (QTY) 48"(3) 52"(3) 60"(3) 60" Rear(3) Notched Air Foil CW (2) Solid Air Foil n/a Low Lift CCW CW Mulching* n/a extreme 2 Mulching CCW (1) CW *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel MISC All Units Hydro Oil Filter BELTS 48" 52" 60" 60" Rear Pump Drive Blade Drive Right Blade Drive n/a n/a n/a DRIVE WHEELS Rim Only Tire Only Complete PNEUMATIC TIRE ASSEMBLY Rim Only n/a n/a n/a n/a Tire Only Complete CW = Clockwise CCW = Counter Clockwise POWER COMPONENTS Engines FX730V Kawasaki ; ZT710, ZT720 and ZT740 Kohler V-Twin engines. All engines are governed to 3,750 rpm. Air Filter Heavy-duty canister air filtration system on Kawasaki. Drive System Dual Hydro-Gear ZT3100, hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components. 60" model uses dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and spin-on filter. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection from mph (12.9 kmph) forward, mph (8.0 kmph) reverse on 48"/52" models. Infinitely variable speed selection from mph (14.5 kmph) forward, mph (9.7 kmph) reverse on 60" model. PTO Engagement MagStop electromagnetic 175-ft-lb clutch on 48"/52" models. MagStop electromagnetic 200-ft-lb clutch with spot brake on 60" unit. Fuel Capacity 7-gallon (26.5-L) single fuel tank. Drive-Wheel Release Standard - allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators. Rollover Protection System (ROPS) 2-post foldable ROPS standard with seat belt and latch. Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. DECKS Style Full-floating 5.0"-deep UltraCut Series 3 on 48" & 52" models. Full-floating 5.5"-deep UltraCut Series 4 on 60" model. All models have side-discharge standard with molded discharge chute and option to bag or mulch. Rear-discharge decks have UltraCut Rear Discharge cutting deck with option to mulch. 90 Widths Available 48" (122 cm) 52" (132 cm) and 60" (152 cm). Deck Construction 10-gauge top that is formed and continuously seam welded and 7-gauge side skirt on all units. 60" model also has 7-gauge spindle mounting. 4-point suspension, full-floating deck with 3 adjustable, anti-scalp rollers on 48" & 52" models. 4 adjustable, anti-scalp rollers on 60" model. Cutting Height 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position via foot-operated, decklift system. Blade Spindles No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Unibody, welded, heavy-duty 2" square tublar steel. Steering and Motion Control Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 3-height positions. Casters.38" thick caster yoke arms..50" thick caster yoke arms on A3 models Front Caster Tires 13 x 5.0-6, smooth tread, pneumatic. 13 x 6.5-6, smooth tread, pneumatic on A3 models. Drive Tires 22 x Super Turf on 48" & 52" models. 23 x Super Turf tires on 60" model. Turning Radius True zero-turn. Parking Brake Lever-actuated pawl brake. Seat Commercial-grade high-back contoured foam padded with armrests. Hinged mounting with spring suspension. Adjustment is fore and aft from operator s position. A3/A4 models have a deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment is fore and aft from operator s position. Electrical 12-volt battery with 15-amp alternator. Engine Hour Meter Standard. Cup Holder Standard. 91

48 LAZER Z E-SERIES Model Number Engine Size Deck Weight Length Height Width Defl. Down Width Defl. Up LZE651GKA484A2 FX651V Kawasaki 48" UltraCut Series lbs 79.2" 70.0" 59.6" 51.8" $ LZE751GKA524A2 FX751V Kawasaki 52" UltraCut Series lbs 79.2" 70.0" 64.8" 56.3" $ LZE740EKC60400 ECV740 Kohler EFI 60" UltraCut Series lbs 83.1" 70.0" 72.8" 62.5" $ LZE751GKA604A1 FX751V Kawasaki 60" UltraCut Series lbs 83.1" 70.0" 72.8" 62.5" $ LZE751GKA60RA1 FX751V Kawasaki 60" UltraCut Rear Discharge 1281 lbs 87.2" 70.0" 66.2" n/a $ LZE751GKA724A1 FX751V Kawasaki 72" UltraCut Series lbs 86.1" 70.0" 84.9" 73.5" $ LZE751GKA72RA1 FX751V Kawasaki 72" UltraCut Rear Discharge 1326 lbs 87.2" 70.0" 78.2" n/a $ Price KEY FEATURES Available with side- or rear-discharge decks. Compact, heavy-duty unibody frame with standard rear-sloping, easily foldable ROPS High-back, two tone, bolstered seat with Elastomeric Vibration Control (EVC) material. A1 & A2 models have two-tone bolstered suspension seat with EVC. Exmark exclusive Parker unitized 12cc pump and wheel motor system with no hoses. Welded, heavy-duty 1.5" x 3" tubular steel unibody for increased durability. Heavy-duty canister air filtration system improves engine life, simplifies maintenance and boosts overall productivity. No routine grease points. Only 4 annual grease points. See page 165 for Exmark warranty details 92 ACCESSORIES & ATTACHMENTS 12 Volt Adapter Equipment Cover - Large (excludes 72") Extended Drive Lever (excludes B1/B2 models) Floor Pan Mat (excludes B1/B2 models) Harness Add-On Accessory Kit Hitch Kit Hydro Maintenance Kit Jack Jack Mount Receiver Light Kit Power Deck Lift (excludes B1/B2 models) Sun Shade Trash Container, 2.5-gallon capacity...tc26 Air Ride Suspension Seat (excludes B1/B2 models) Full-Suspension Seat Tilt Frame & 3D Isolation System Kit (excludes B1/B2 models) Custom Ride Seat Suspension SIDE-DISCHARGE ONLY 3-Bushel Bagger (Does not fit 72")... GC3602 Operator Controlled Discharge (excludes B1/B2 models) Rear Anti-Scalp Kit - Fits 60" Mulching Kits 48" unit...mk " unit...mk526 60" unit...mk " unit...mk726 Turf Striper Vertical Adjust (48"/52"/60") " UltraVac Collection Systems Double-Bag - 48" & 52" units...lzuv2b UltraVac, Quick-Disposal, 7-Bushel - 48" & 52" units...lzuvqd7 Triple-Bag - 60" & 72" units...lzuv3b UltraVac, Quick-Disposal, 11-Bushel - 60" & 72" units...lzuvqd11 UltraVac Kits 48" unit " unit " unit " unit REAR-DISCHARGE ONLY Finish Cut Baffles 60" unit " unit Side Wear Bar Kit with front anti-scalp roller White non-marking side bumper For more information on Accessories see page

49 LAZER Z E-SERIES BLADES (QTY) 48"(3) 52"(3) 60"(3) 72"(3) 60" Rear(3) 72" Rear(3) Notched Air Foil CW(2) CW(2) Solid Air Foil n/a n/a Low Lift CCW CW CCW CW Mulching* n/a n/a extreme 2 Mulching CCW (1) CW *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel MISC All Units Hydraulic Filter CCW (1) CW QUICK REFERENCE BELTS 48" 52" 60" 72" 60" Rear 72" Rear Pump Drive Blade Drive Right Blade Drive n/a n/a n/a n/a DRIVE WHEELS Rim Only Tire Only Complete SEMI-PNEUMATIC TIRE ASSEMBLY Complete PNEUMATIC TIRE ASSEMBLY A1 Models CW = Clockwise CCW = Counter Clockwise POWER COMPONENTS Engines FX651V & FX751V Kawasaki V-Twin, and ECV740 Kohler EFI engines. All engines are governed to 3,750 rpm. Air Filter Heavy-duty canister air filtration system. Drive System Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12cc pumps and 14.5 cubic inch motors. 60" & 72" units also has integrated cooling fans and shock valves. Hydro Fluid Exmark Premium Hydro Oil. Speed Infinitely variable speed selection mph (12.9 kmph) forward, mph (9.7 kmph) reverse on 48" and 52" units. Infinitely variable speed selection from mph (16 kmph) forward, mph (9.7 kmph) reverse on 60" and 72" units. PTO Engagement MagStop Electromagnetic 175 ft-lbs clutch with spot brake on 48" and 52" models. MagStop electromagnetic 200-ft-lbs clutch with spot brake on 60" and 72" models. Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location. Drive-Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators. Rollover Protection System (ROPS) 2-post foldable ROPS standard with seat belt and latch. Quick Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. DECKS Style Full-floating UltraCut Series 4. Side-discharge standard with the option to bag or mulch. Rear-discharge decks have UltraCut Rear Discharge cutting deck with option to mulch. 94 Widths Available 48" (122 cm), 52" (132 cm), 60" (152 cm) and 72" (183 cm). Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength. 4-point suspension, fullfloating deck with 3 adjustable anti-scalp rollers on 48" & 52". 4 adjustable anti-scalp rollers on 60"; 6 adjustable anti-scalp rollers on 72". Rear-discharge decks 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt. 5.5"-deep deck. Cutting Height 1.0" (2.5 cm) to 5.5" (11.4 cm) in 0.25" (0.64 cm) increments adjustable from operator s seat. Blade Spindles No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm (.98") -diameter spindle shaft and splined blade driver. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel. Steering and Motion Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions. Casters.50" thick caster yoke arm. Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic. A1, B1 models have 13 x , smooth-tread, semi-pneumatic. Drive Tires 23 x , 4-ply Super Turf drive tires on 48" and 52" models. 24 x 12-12, 4-ply Super Turf drive tires on 60" and 72" model. Turning Radius True zero-turn. Parking Brake Lever-actuated disc brake. Seat Two-toned, bolstered seat with Elastomeric Vibration Controlled material. Adjustment: fore and aft from operator's position. A1 & A2 have deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Diagnostics Operational diagnostics with integral fuel gauge. EFI unit has malfunction indication light (MIL). Electrical 12-volt battery with 15-amp alternator. 20-amp on Kohler EFI models. Engine Hour Meter Standard. Cup Holder Standard. 95

50 LAZER Z S-SERIES Model Number Engine Size Deck Weight Length Height Width Defl. Down Width Defl. Up LZS651CKA484A2 FX651V Kawasaki 48" UltraCut Series lbs 79.2" 70.0" 59.6" 51.8" $ LZS740AKC524A2 ECV740 Kohler EFI 52" UltraCut Series lbs 79.2" 70.0" 64.8" 56.3" $ LZS740PKC52400 PCV740 Kohler EFI Propane 52" UltraCut Series lbs 79.2" 70.0" 64.8" 56.3" $ LZS801GKA524A2 FX801V Kawasaki 52" UltraCut Series lbs 79.2" 70.0" 64.8" 56.3" $ LZS749AKC604A1 ECV749 Kohler EFI 60" UltraCut Series lbs 83.1" 70.0" 72.8" 62.5" $ LZS740PKC60400 PCV740 Kohler EFI Propane 60" UltraCut Series lbs 83.1" 70.0" 72.8" 62.5" $ LZS801GKA604A1 FX801V Kawasaki 60" UltraCut Series lbs 83.1" 70.0" 72.8" 62.5" $ LZS740PKC72400 PCV740 Kohler EFI Propane 72" UltraCut Series lbs 86.1" 70.0" 84.9" 73.5" $ LZS749AKC72400 ECV749 Kohler EFI 72" UltraCut Series lbs 86.1" 70.0" 84.9" 73.5" $ LZS749AKC724A1 ECV749 Kohler EFI 72" UltraCut Series lbs 86.1" 70.0" 84.9" 73.5" $ LZS801GKA724A1 FX801V Kawasaki 72" UltraCut Series lbs 86.1" 70.0" 84.9" 73.5" $ Price KEY FEATURES Available with side-discharge decks. High-capacity, 12-gallon, single fuel tank with single fill location to reduce your time at the gas pump. High-back, two-tone, bolstered seat with Elastomeric Vibration Control (EVC) material. A1 and A2 models have deluxe, bolstered suspension seat with EVC. Both seats are mounted on Seat Isolation System. Exmark exclusive Parker unitized 12cc pump and wheel motor system with no hoses. Welded, heavy-duty 1.5" x 3" tubular steel unibody for increased durability. Heavy-duty canister air filtration system that improves engine life, simplifies maintenance and boosts overall productivity. No routine grease points. Only 4 annual grease points. See page 165 for Exmark warranty details 96 ACCESSORIES & ATTACHMENTS 3-Bushel Bagger (Does not fit 72")... GC Volt Adapter Extended Driver Lever Equipment Cover - Large (Does not fit 72") Floor Pan Mat Harness Add-On Accessory Kit Hitch Kit Hydro Maintenance Kit Jack Jack Mount Receiver Light Kit Mulching Kits 48" unit...mk486 52" unit...mk526 60" unit... MK606 72" unit...mk726 Operator Controlled Discharge Power Deck Lift Rear Anti-Scalp Kit - Fits 60" Sun Shade Trash Container, 2.5-gallon capacity...tc26 Turf Striper Vertical Adjust 48", 52" & 60" units " unit UltraVac Collection Systems (does not fit propane except 60") Double-Bag - 48" & 52" units...lzuv2b UltraVac, Quick-Disposal, 7-Bushel - 48" & 52" units...lzuvqd7 Triple-Bag - 60", 60" Propane & 72" units...lzuv3b UltraVac, Quick-Disposal, 11-Bushel - 60" & 72" units...lzuvqd11 UltraVac Kits 48" unit " unit " unit " Propane unit " unit Air Ride Suspension Seat Custom Ride Seat Suspension Full-Suspension Seat For more information on Accessories see page

51 LAZER Z S-SERIES BLADES (QTY) 48"(3) 52"(3) 60"(3) 72"(3) Notched Air Foil Solid Air Foil Low Lift Mulching* extreme 2 Mulching *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel MISC All Units Hydraulic Filter QUICK REFERENCE BELTS 48" 52" 60" 72" Hydraulic Drive Blade Drive Right Blade Drive n/a n/a n/a n/a DRIVE WHEELS Rim Only Tire Only Complete SEMI-PNEUMATIC TIRE ASSEMBLY Complete standard 2 optional 3 LZS740KC604 uses POWER COMPONENTS Engines FX651V & FX801V Kawasaki ; ECV740 & ECV749 Kohler EFI engines; PCV740 Kohler Command EFI Propane. All engines are governed to 3,750 rpm. Air Filter Heavy-duty canister air filtration system. Drive System Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12cc pumps and cubic inch motors 48" & 52" units. 12cc pumps and cubic inch motors with integrated shock valve 60" & 72" units. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection from mph (16.0 kmph) forward, mph (9.7 kmph) reverse. PTO Engagement MagStop electromagnetic 200-ft-lbs clutch with spot brake. Fuel Capacity High-capacity, 12-gallon (45.4-L), single fuel tank with single fill location. Propane model has 43.5 lb (10.3 gallon) propane tank. Drive-Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators. Rollover Protection System (ROPS) 2-post foldable ROPS standard with seat belt and latch. Quick Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. DECKS Style Full-floating UltraCut Series 4. Side-discharge standard with the option to bag or mulch. Widths Available 48" (122 cm) 52" (132 cm) 60" (152 cm) and 72" (183 cm). Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. 4-point suspension, full-floating deck with 3 adjustable anti-scalp rollers on 48" & 52". 4 adjustable anti-scalp rollers on 60"; 6 adjustable anti-scalp rollers on 72". Cutting Height 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator s seat. Blade Spindles No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel. Steering and Motion Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions. Casters.50" thick caster yoke arm. Front Caster Tires 13 x 5.0-6; smooth-tread, semi-pneumatic on 48," 52". 13 x 6.5-6; smooth-tread, semi-pneumatic on 60" and 72" units. Drive Tires 23 x , Turf Master (48" & 52"). 24 x , Turf Master (60" & 72"). Turning Radius True zero-turn. Parking Brake Lever-actuated disc brake. Propane units have Leveractuated disc and caliper. Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. A1 and A2 models have deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. Diagnostics Operational diagnostics with integral fuel gauge. EFI unit has malfunction indication light (MIL). Electrical 12-volt battery with 15-amp alternator. EFI has 20-amp. Engine Hour Meter Standard. Cup Holder Standard

52 LAZER Z X-SERIES Model Number Engine Size Deck Weight Length Height LZX740EKC526T0 ECV740 Kohler EFI Red Equipped Width Defl. Down Width Defl. Up 52" UltraCut Series lbs 79.2" 70.5" 64.8" 56.3" $ LZX801GKA60600 FX801V Kawasaki 60" UltraCut Series lbs 83.1" 70.5" 72.8" 62.5" $ LZX921GKA60600 FX921V Kawasaki 60" UltraCut Series lbs 83.1" 70.5" 72.8" 62.5" $ LZX940EKC60600 ECV940 Kohler EFI 60" UltraCut Series lbs 83.1" 70.5" 72.8" 62.5" $ LZX940EKC606T0 ECV940 Kohler EFI RED Equipped 60" UltraCut Series lbs 83.1" 70.5" 72.8" 62.5" $ LZX940EKC60RT0 ECV940 Kohler EFI Red Equipped 60" UltraCut Rear Discharge 1375 lbs 87.2" 70.5" 66.2" n/a $ LZX921GKA72600 FX921V Kawasaki 72" UltraCut Series lbs 86.1" 70.5" 84.9" 73.5" $ LZX980EKC72600 ECV980 Kohler EFI 72" UltraCut Series lbs 86.1" 70.5" 84.9" 73.5" $ LZX980EKC726T0 ECV980 Kohler EFI RED Equipped 72" UltraCut Series lbs 86.1" 70.5" 84.9" 73.5" $ LZX940EKC72RT0 ECV940 Kohler EFI Red Equipped 72" UltraCut Rear Discharge 1390 lbs 87.2" 70.5" 78.2" n/a $ Price KEY FEATURES Available with side- or rear-discharge decks. Equipped with ergonomically advanced suspension seat system featuring our exclusive ISO-mount Seat Isolation System. Exmark exclusive Parker unitized 12cc (52") or 16cc (60"/72") pump and wheel motor system with no hoses. Incorporates RED, an onboard intelligence platform, helps to optimize machine life, maximize productivity and dramatically increase fuel efficiency. It enables communication and response between key systems on your mower. Featured on T0 models. Welded, heavy-duty 1.5" x 3" tubular steel unibody for increased durability. Heavy-duty canister air filtration system that improves engine life, simplifies maintenance and boosts overall productivity. No routine grease points. Only 4 annual grease points. See page 165 for Exmark warranty details 100 ACCESSORIES & ATTACHMENTS Air Ride Suspension Seat Extended Drive Lever Kit (excludes B1 models) Equipment Cover - Large (Does not fit 72") Floor Pan Mat Harness Add-On Accessory Kit Hitch Kit Hydro Maintenance Kit Jack Jack Mount Receiver Light Kit Power Deck Lift (excludes B1 models) RED Max Lock Out Kit Sun Shade Trash Container, 2.5-gallon capacity...tc26 SIDE-DISCHARGE ONLY 3-Bushel Bagger (Does not fit 72")... GC3602 Mulching Kits 52" unit... MK526 60" unit... MK606 72" unit... MK726 Operator Controlled Discharge (excludes B1 models) Rear Anti-Scalp Kit - Fits 60" Turf Striping Kit 52" & 60" units " unit UltraVac Collection Systems Double-Bag - 52" unit... LZUV2B UltraVac, Quick-Disposal, 7-Bushel - 52" unit...lzuvqd7 Triple-Bag - 60" & 72" unit...lzuv3b UltraVac, Quick-Disposal, 11-Bushel - 60" & 72" units...lzuvqd11 UltraVac Kits 52" unit " unit " unit REAR-DISCHARGE ONLY Finish Cut Baffles 60" unit " unit Side Wear Bar Kit with front anti-scalp roller White non-marking side bumper For more information on Accessories see page

53 LAZER Z X-SERIES BLADES (QTY) 52"(3) 60"(3) 72"(3) 60" Rear(3) 72" Rear(3) Notched Air Foil CW(2) CW(2) Solid Air Foil n/a n/a Low Lift CCW CW CCW CW Mulching* n/a n/a extreme 2 Mulching CCW (1) CW *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel MISC All Units Hydraulic Filter CCW(1) CW QUICK REFERENCE BELTS 52" 60" 72" 60" Rear 72" Rear Hydraulic Drive Blade Drive Right Blade Drive n/a n/a n/a DRIVE WHEELS Rim Only Tire Only Complete SEMI-PNEUMATIC TIRE ASSEMBLY Complete CW = Clockwise CCW = Counter Clockwise POWER COMPONENTS Engine ECV740, ECV940, ECV980 Kohler Command EFI; FX801V and FX921V Kawasaki engines. All engines governed to 3,750 rpm except RED units are 3,650 rpm. Air Filter Heavy-duty canister air filtration system. Drive System Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12cc pumps and 14.5 cubic inch motors on 52" units. 16cc pumps and 17.1 cubic inch motors with shock valves on 60" & 72" units. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection from mph (16.0 kmph) forward, mph (9.7 kmph) reverse on 52" units. Infinitely variable speed selection from mph (18.5 kmph) forward, mph (11.3 kmph) reverse on 60" & 72" models. PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake except FX801V and ECV740 have 200-ft-lbs. Fuel Capacity High-capacity, 12-gallon (45.4-L), single fuel tank with single fill location. Drive-Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators. Rollover Protection System (ROPS) 2-post foldable ROPS standard with seat belt and latch. Quick Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. DECKS Style Full-floating UltraCut Series 6 featuring a heavy-duty spindle. Side-discharge standard with the option to bag or mulch. Reardischarge decks have UltraCut Rear Discharge cutting deck with option to mulch. Widths Available 52" (132 cm) 60" (152 cm) and 72" (183 cm). Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting reinforcements for improved strength and reduced weight. 4-point suspension, full floating deck. 72" unit has 6 adjustable, coneshaped, anti-scalp rollers. 60" unit has 4 adjustable, cone-shaped, antiscalp rollers. 52" units have 3 adjustable, cone-shaped, anti-scalp rollers. Rear-discharge decks 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt. 5.5"-deep deck. Cutting Height 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator s seat. Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm diameter spindle shaft. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel. Steering and Motion Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions. Casters.50" thick caster yoke arm. Front Caster Tires 13 x smooth tread, semi-pneumatic tires on 52" units. 13 x smooth tread, semi-pneumatic tires on 60" & 72" units. Drive Tires 23 x , Turf Master on 52" units. 24 x , 4-ply Turf Master on 60" & 72" units. Turning Radius True zero-turn. Parking Brake Lever-actuated disc brake. Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as foreaft slide and seat flip-up. Diagnostics Operational diagnostics with integral fuel gauge. EFI unit has malfunction indication light (MIL). T0 models are equipped with RED technology. Electrical All have 12-volt battery. 15-amp alternator on Kawasaki units. 20-amp on Kohler units. Engine Hour Meter Standard. Cup Holder Standard

54 LAZER Z DS-SERIES Model Number Engine Size Deck Weight Length Height Width Defl. Down Width Defl. Up LZS902DKU605A1 D902 Kubota Diesel 60" Series lbs 84.5" 72.7" 72.8" 61.4" $ Price LZS902DKU725A1 D902 Kubota Diesel 72" Series lbs 88.7" 72.7" 85.8" 74.3" $ LZS902DKU60R00 D902 Kubota Diesel 60" LZS902DKU72R00 D902 Kubota Diesel 72" UltraCut Rear Discharge UltraCut Rear Discharge 1552 lbs 85.6" 72.7" 66.2" n/a $ 1629 lbs 89.8" 72.7" 78.2" n/a $ KEY FEATURES Now available with a rear-discharge deck. Features a new ergonomically advanced suspension seat. Engine cooling system increases engine cooling efficiency and improves airflow through radiator in tough conditions. Improved engine isolation system, for better vibration reduction. Automatic PTO shutdown provides engine overheat protection. Utilizes large-capacity, 21cc Hydro-Gear variable displacement pumps with shaft-mounted cooling fans. High-torque wheel motors provide increased performance. Heavy-duty tubular steel frame design for maximum durability. Adjustable dampers allow the operator to customize drive responsiveness to suit personal preference. Heavy-duty canister air filtration system improves engine life, minimizes maintenance and boosts overall productivity. Standard full-suspension seat with armrests. The DS-Series models are B20 biodiesel-ready for lower emissions and reduced environmental impact. See page 165 for Exmark warranty details 104 ACCESSORIES & ATTACHMENTS Equipment Cover - Large (Does not fit 72") Hitch Kit Jack Jack Mount Receiver Light Kit Sun Shade Trash Container, 2.5-gallon capacity... TC26 SIDE-DISCHARGE ONLY Mulching Kits 60" unit... MK605 72" unit... MK725 Turf Striping Kit 60" unit... STR605 72" unit UltraVac Collection Systems Triple-Bag - 60" unit...uv60 Triple-Bag - 72" unit... UV6672 UltraVac, Quick-Disposal, 11-Bushel - 60" unit... UVD60 UltraVac, Quick-Disposal, 11-Bushel - 72" unit... UVD6672 UltraVac Kits 60" unit " unit Floor Pan Weight REAR-DISCHARGE ONLY Finish Cut Baffles 60" unit " unit Side Wear Bar Kit White Non-Marking Side Bumper For more information on Accessories see page

55 LAZER Z DS-SERIES BLADES (QTY) 60"(3) 72"(3) 60" Rear (3) 72" Rear (3) Notched Air Foil CW (2) CW(2) Solid Air Foil n/a n/a Low Lift CCW CW CCW CW Mulching* n/a n/a extreme 2 Mulching CCW (1) CW *Requires installation of Micro-Mulch accessory for proper mulching Material is 0.20 thick alloy steel MISC All Units Hydro Oil Filter CCW(1) CW QUICK REFERENCE BELTS 60" (Side) 72" (Side) 60" (Rear) 72" (Rear) Mule Drive Blade Drive Pump Drive DRIVE WHEELS Rim Only Tire Only Complete SEMI-PNEUMATIC TIRE ASSEMBLY Complete CW = Clockwise CCW = Counter Clockwise POWER COMPONENTS Engine D902 Kubota 3-cylinder liquid-cooled diesel, governed to 3,850 rpm. Air Filter Heavy-duty canister air filtration system. Drive System Two Hydro-Gear 21cc/rev pumps with integral SCR (System Check Relief) valves (in forward), powering two 18-cubic-inch wheel motors with 1.25" (3.18 cm) diameter tapered shafts. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection from mph (19.3 kmph) forward, mph (12.9 kmph) reverse. PTO Engagement MagStop electromagnetic 250-ft-lb clutch with spot brake. Fuel Capacity 15.5-gallons (58.7-L) twin fuel tanks. Drive-Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock Rollover Protection System (ROPS) 2-post foldable ROPS standard with seat belt and latch. Deck Lift - Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Casters 0.50" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Cup Holder Standard. DECKS Style Side-discharge decks have Series 5 cutting deck with option to bag or mulch. Rear-discharge decks have UltraCut Rear Discharge cutting deck with option to mulch. Widths Available 60" (152 cm) and 72" (183 cm). 106 Deck Construction Side-discharge decks have 10-gauge top that is formed and continuously seam-welded, with 10-gauge top reinforcement plate, 7-gauge side skirt and 7-gauge reinforcement rings at spindle assembly. 6.0"-deep deck, 4-point suspension, full-floating deck with 6 adjustable, cone-shaped, anti-scalp rollers. Rear-discharge decks have 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt. 5.5"-deep deck. Cutting Height Side-discharge: 1.0" (2.5 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments and adjustable from operator s seat. Rear-discharge: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position via foot-operated, deck-lift system. Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Welded, heavy-duty tubular steel. Steering and Motion Control Hydraulically dampened twin levers, adjustable fore and aft. Adjustable dampers (3 positions) to customize drive responsiveness. Also adjustable to 2-height positions. Front Caster Tires 13 x , smooth-tread, semi-pneumatic tires on side-discharge decks. 15 x , smooth-tread, semipneumatic tires on rear-discharge decks. Drive Tires 26 x , 4-ply Multi-Trac. Turning Radius True zero-turn. Parking Brake Lever-actuated drum and band integrated with transmission-neutral interlock. Seat Deluxe, two-tone bolstered, full-suspension seat with Elastomeric Vibration Control material. Adjusts to individual operator weight and features padded, height-adjustable armrests. Hinged mounting. Electrical 12-volt battery with 60-amp alternator. Engine Hour Meter Standard. Fuel Gauge Standard. Console Storage Compartment Standard. 107

56 NAVIGATOR Model Number Engine Size Deck Weight Length Deck Down Length Deck Up Height Width Price NVS740CKC42000 CH740 Kohler 42" Center Discharge 1140 lbs 91.8" 81.8" 51.2" 43.2" $ NVS730AKC48000 ECH730 Kohler EFI 48" Center Discharge 1170 lbs 94.5" 82.4" 51.2" 49.2" $ NVS740CKC48000 CH740 Kohler 48" Center Discharge 1170 lbs 94.5" 82.4" 51.2" 49.2" $ KEY FEATURES Navigator now comes with a cutting deck installed. Enhanced controls for improved steering response. Full-floating, 4 5/8"-deep deck that traces the precise contours of the turf for a flawless cut. Rear-discharge deck design with two-sided trimming enables the operator to effectively control discharge around landscape areas. Integrated collection system combines precision cutting performance with advanced dedicated bagger technology. Large-capacity, 9.5-bushel (76 gallons) hopper is standard. Larger-diameter (5" x 11") blower generates enhanced airflow for optimum vacuuming performance and debris collection. Fill Reduction provides the versatility to: 100% bag Closed 50% mulch / 50% bag 100% mulch (requires optional mulch kit) Comfortable, ergonomic positioning of the controls minimizes fatigue. Commercial-grade, high-back contoured foam padded seat for improved operator comfort See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS 2-Post Foldable ROPS CustomRide Seat Suspension Kit Dual Semi-Pneumatic Rear Casters Harness Add-On Accessory Light Kit Mulching Kit 42" deck... MKNAV42 48" deck... MKNAV48 Narrow Drive Tire Kit (pair) 18 x (s/n 313,000,000 & higher) Automatic Door Opener Kit Removable Dump Tub Kit Powered Dump Tire and Wheel 18 x Fill Reduction Kit for models below s/n 670, For more information on Accessories see page

57 NAVIGATOR BLADES (QTY) 42" LH (1) 42" RH (1) 48" LH (1) 48" RH (1) Standard Mulching* " has 3.5" air foil. 48" has 5.5" air foil. Material is 0.164" thick. *Requires installation of Micro-Mulch accessory for proper mulching. BELTS 42" 48" PTO/Blower Drive Hydro Pump Drive MISC Blade Driver Blade Bolt Shear Pin All Units All Units Above 32 F Below 32 F Hydro Oil Filter QUICK REFERENCE DRIVE WHEELS 42" 48" Rim Only 18 x / 18 x Tire Only - Optional 18 x Tire Only - Standard 18 x Complete - Optional 18 x Complete - Standard 18 x FRONT CASTER WHEELS Complete REAR CASTER WHEELS 13 x x matched set 2 semi-pneumatic tire assembly w/axle 3 semi-pneumatic tire assembly dual tires POWER COMPONENTS Engines CH640 & CH740 Kohler Command ; ECH730 Kohler Command EFI engines. All engines are governed to 3,600 rpm. Air Filter Heavy-duty canister air filtration. Drive System Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors. Hydro Fluid Exmark Premium Hydro oil. Speed Infinitely variable speed selection from mph (11.3 kmph) forward, mph (7.2 kmph) reverse. PTO Engagement Lever-actuated clutching belt with 6" brake band. Fuel Capacity 7.5-gallon (28.4-L), pivoting tank for easier engine service. Drive-Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) and drive system interlock. Rollover Protection System (ROPS) Optional. Casters 0.38" thick front caster fork. DECKS Style Full-floating, center-discharge cutting deck with heavyduty gear-driven spindle assembly. Patented Fill Reduction baffles standard. Widths Available 42" (107 cm) and 48" (122 cm). Deck Construction 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports. Cutting Height 1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments. Blade Spindles Heavy Duty cast iron right-angle gearboxes. Blade Drive 1" Austempered spindle shaft with shear-pin protection at the blades. Blade-Tip Speed Approximately 18,500 fpm. EQUIPMENT Tractor Frame Channeled and fully welded 1.5 x 1.5 x wall tubing with a ground clearance of 4.0, strategically located, continuous force counterweight springs. Steering and Motion Control "FeatherTouch" hand-control drive levers, low-force constant speed lever. Front Caster Tires 8 x semi-pneumatic. Rear Caster Tires 13 x semi-pneumatic. Drive Tires 18 x Multi-Trac C/S. Turning Radius True zero-turn. Parking Brake Wet disc, internal in wheel motor. Seat Commercial-grade, high-back contoured foam padded seat. Diagnostics Operational diagnostics in hour meter. Electrical 12-volt battery with 15-amp alternator. EFI unit has 20-amp alternator. Engine Hour Meter Standard. Gearbox Design Heavy-duty cast iron. Three independently sealed high-capacity gearboxes with spiral bevel-cut gears for quiet operation. Blower 5.0" x 11" x 1/4" housing with reinforced high-wear areas and a three-blade abrasion-resistant impeller. Grass Catcher Capacity Rear tapered 9.5-bushel (76-gallon) capacity. Diffuser Fixed mechanical with Exmark exclusive debris manager. Fill Indicator Audible alarm. Ground Clearance 4" from base of tractor frame

58 ECO BENEFITS OF OUR ECO-FRIENDLY MOWERS. BIO-DIESEL: Diesel models are biodiesel ready, up to B20, for lower emissions and reduced environment impact. B20 represents a mix of 20 percent biodiesel and 80 percent diesel. Cleaner-burning alternative fuel made from renewable resources. Compared to petroleum-based fuels, biodiesel emits less carbon dioxide, a major contributor to greenhouse gas emissions. Also emits less unburned hydrocarbons and particulate matter which are considered harmful emissions. Superior fuel lubricity resulting in less wear and equipment downtime. ELECTRONIC FUEL INJECTION: Reduces fuel consumption, fewer emissions and carbon footprint. Delivers up to 25% in fuel savings. Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases. Easy start in any altitude or climate condition (no manual choke). Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels. Sequential Fuel Injection delivers the precise amount of fuel and spark where needed to maximize efficiency and power. PROPANE: Typically, fuel costs for propane will be less than gasoline, which results in lower operating costs. Propane is considered a GREEN Alternative Fuel and when burned, it produces less GHG (green house gas) yielding a reduced CARBON FOOTPRINT as compared to gasoline. PERC (Propane Education & Research Council) reports that GHG reductions typically range in the 20% to 25% range. No known restrictions regarding hours of operation on "Ozone Action Days." Propane is a cleaner burning fuel and has fewer combustion by-products as compared to gasoline. Engine oil will contain less contaminates for the equivalent hours of operation. Propane fuel stability - No deterioration or breakdown of fuel over time creating "varnish deposits" as gasoline does. No need for fuel stabilizers during long periods of storage. The propane tanks are of a unique "vapor draw" design that includes a special baffle system to prevent liquid propane ingestion into the supply line, which can cause damage to fuel system components and render the unit inoperative. AERATOR S-SERIES Model Number Engine Size Price ARS180CKA21000 FJ180V Kawasaki KAI 21" $ Weight Length Height Width 350 lbs 61" 52" 30" includes two 30 lb wt MISC ITEMS Belt Tines WHEELS Front Rear Rim Only n/a Tire Only n/a Complete ACCESSORIES & ATTACHMENTS Weight KEY FEATURES Easy to use controls - Intuitive operation. Optional removable suitcase weights. Two 30 lb. weights are standard and one additional 30 lb. weight is optional. Low effort maneuverability as compared to competitive offerings. Split tine shaft with independent idlers for easier turning with tines engaged. Self-cleaning tines. Single bail traction control. Easy to replace tines. Lever control tine engagement. 1-year limited warranty. See page 165 for Exmark warranty details SPECIFICATIONS Engine FJ180V Kawasaki KAI with recoil start governed to 3,600 rpm. Fuel Capacity 1 gallon (3.8-L). Working Width 21" Rear Tires 10 x solid. Front Tires 11 x 4-4. Transmission Hydro-Gear T2. Drive #40 chain. # of Tines 36 coring tines. Core depth 2" to 3". Aerating Speed mph (6.4 kmph) forward Plugs/square foot 4.6 TURF

59 30" STAND-ON AERATOR 20" SLICER SEEDER Model Number Engine Size Price ARX541CKA30000 FS541V Kawasaki 30" $ Model Number Engine Size Price SDS270CSB20000 Subaru EX270 20" $ Weight Length Height Width 1015 lbs 69" 53" 48" Weight Length Height Width 270 lbs (handle folded) 38" (handle folded) 31" 30" (handle up) 52" (handle up) 45" MISC ITEMS Transmission Belt Auxiliary Belt Tines Hydro Filter WHEELS Front Rear Rim Only Tire Only n/a Complete n/a MISC ITEMS Clutch Belt Transmission Belt Seeder Cutting Blade WHEELS Front Rear Rim Only Tire Only Complete TURF KEY FEATURES Easy to use controls - Intuitive operation. Weight directly over tines to maximize core depth. Compact size as compared to competitive offerings. Split tines for easier turning with tines engaged. Self-cleaning tines. Easy to replace tines. Foot pedal for tine engagement. Tine down - force hydraulic actuated (also adjustable). 1-year limited warranty. See page 165 for Exmark warranty details KEY FEATURES Easy to maneuver and operate. The wide stable base delivers good side hill stability and even cutting Verticutting reel. Integrated lift handles and foldable handles improve transport and storage. Blades - Increase seed/soil contact, removes thatch, and highcarbon steel for improved durability. Seed mixer is regulated by ground speed for even distribution. 1-year limited warranty. See page 165 for Exmark warranty details TURF SPECIFICATIONS Engine FS541V Kawasaki electric start engine governed to 3,600 rpm. Fuel Capacity 5 gallons (18.9-L). Working Width 30" Rear Tires 16 x Front Tires 13 x 5-6 semi-pneumatic. Transmission Hydro-Gear ZT3100. Drive #50 chain. # of Tines 48 coring tines. Core depth 2" to 5". Aerating Speed mph (11.2 kmph) forward Plugs/square foot 4.6 SPECIFICATIONS Engine Subaru EX270 engine. Fuel Capacity 1.6 gallons (6.0-L). Clutch Warner Mag-Stop. Tires 11 x 4-4 Cutting Depth Adjustable up to 1" deep Seeding / Slicing Width 20" Hopper Size 40 lbs. Speed mph (6.1 kmph) forward

60 36" ROTARY BROOM Model Number Engine Size Weight Length Height Width Price BRS270CKC36000 CH270 Kohler 36" 323 lbs 73" 40" 46" $ MISC ITEMS Broom Head Traction WHEELS Rear Rim Only Tire Only Complete RH LH TURF KEY FEATURES Maneuverable, versatile, and durable multipurpose rotary broom ideal for operation in all seasons The Kohler engine functions as a multi-season engine as the air intake rotates 180. Patented Power Steering - Turn on a dime. Wheels can be disengaged independently or simultaneously with trigger controls making turning, reversing and steering easy. Independent control levers to engage broom and ground drive Thumb latch for 20 broom angle adjustment on both left and right side Easy Leveling - Robust positive pin-type height adjustment with 1/8" increments for easy leveling and precise ground engagement. Dirt Deflector is standard for 2015 models. 1-year limited warranty. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS Broom Power Kit Broom Deflector Concrete/Snow Bristle Discs (Black) - Set of 18 discs Debris Box Light Kit Snow Cab Kit Tire Chain Kit Turf Caster Turf Bristle Discs (Yellow) Set of 18 discs SPECIFICATIONS Engine CV270 Kohler with recoil start engine governed to 3,600 rpm. Transmission Friction disc. Steering Power steering with clutch left and right hand. Clutch Engine belt tensioner. Fuel Capacity 4.3 quarts (4.0-L). Broom Angle 40 total. 20 left and 20 right. Broom Width 36" (18 wafers). Broom Diameter 25". Broom Speed 200 RPM. Broom Drive Direct. Tires 15 x Broom Wafers Poly 10 ID x 25 OD. std. black (snow/hard surface), yellow wafer (grass), convoluted segment TURF

61 SPREADER SPRAYER Model Number SSS270CSB00000 Engine Subaru EX27 Weight Length Height Width Price 500 lbs 67.5" 51.5" 35.5" $ DRIVE WHEELS Rim Only Tire Only Complete STEERING WHEELS Rim Only Tire Only Complete ACCESSORIES & ATTACHMENTS Anti-Siphon Assembly Cable Guard Protector Hopper Screen - Small Hole Hopper Screen - Large Hole Hose Tray - 15 ft Hose Tray and 30 ft Extended Hose Multi-Purpose Bag Nozzle Spray Red TeeJet Turbo FloodJet TF-VS Nozzle Spray Brown TeeJet Turbo FloodJet TF-VS Nozzle Spray Gray TeeJet Turbo FloodJet TF-VS Nozzle Spray White TeeJet Turbo FloodJet TF-VS Nozzle Spray Blue TeeJet Turbo FloodJet TF-VS Spray Wand TeeJet Spray Wand Valley Industries Spray Wand TeeJet PW4000A Spray Wand TeeJet For more information on Accessories see page TURF KEY FEATURES Equipped with a Subaru engine. Innovative lean-to-steer technology - this advanced solution allows the operator to control all motion with one hand. Stainless steel frame. The agitation system allows for both wetable powder and dry flow-ables. No belt hassle with the direct drive to transaxle and electric spinner motor and pump. Better wide spray coverage with two nozzle set. 20-gallon spray tank. Hopper can hold 175 lbs. An extra 50 lb bag can also be placed on top of spray tank. Stainless steel operator platform with isolation mounts for a more comfortable ride. Locks up or down for storage. See page 165 for Exmark warranty details POWER COMPONENTS Engine Subaru EX27. Engines governed to 3,600 rpm. Displacement 265cc Transmission Hydrostatic. Drive System Tuff Torq Fuel Capacity 1.59 gallons. Ground Speed mph (8.8 kmph) forward, mph (6.4 kmph) reverse. SPREADER AND SPRAY SYSTEM Spread Width Adjustable from 4 ft up to 22 ft. Hopper Capacity 175 lbs, plus 50 lbs on spray tank. Spinner Motor 12 VDC, 2 hp motor. Tank Capacity 20 gallons. Spray Width Wide spray up to 11 ft wide TURF Narrow spray up to 5 ft wide Spray Rate Wide 0.69 gpm at 30 psi, 0.80 gpm at 40 psi Narrow 0.35 gpm at 30 psi, 0.40 gpm at 40 psi Pump Remco EQUIPMENT Front Tire 18 x Rear Tire 13 x Frame Stainless Steel

62 UTILITY VEHICLE Model Number Engine Displacement Weight Length Height Width Price UTS500AAC00000 UTS700AAC000EP SOHC, 4-stroke, 4-valve with EFI SOHC, 4-stroke, 4-valve with EFI 2/4 WD 1307 lbs 129.0" 79.0" 60.0" $ 2/4 WD + Electric Front Differential Lock 1363 lbs 129.0" 79.0" 60.0" $ UTV KEY FEATURES Both UTV models tout 2- or 4-wheel-drive capability. Standard front brush guard. 2" receivers in the front and rear. Digital gauge features 14 critical operation information indicators. Equipped with integrated parking brake. Adjustable shocks maximizes the full 10" of travel and 10" of ground clearance. Convert from cargo box to flat bed. The 2-in-1 cargo box can be converted to flatbed and features manual dumping. See page 165 for Exmark warranty details ACCESSORIES & ATTACHMENTS LXC Cab LXC Windshield LXC Rear Panel LXC Door (Pair) LXC Roof/Headliner VXC Cab VXC Full Windshield VXC Glass Windshield VXC 2-Piece Roof VXC Door (Pair) VXC Vented Windshield VXC Tip-Out Windshield VXC Rear Panel Low Windshield Windshield Wiper Windshield Wiper (Manual) Windshield Washer Fluid Kit (requires ) Rear Storage Box (LH) (RH) Front Under Hood Storage Box Cargo Box Lift Box Enclosure Cab Heater ,000 lb Winch Winch Synthetic Rope Snow Plow (requires ) Rear View Mirror Side-View Mirrors (LH) (RH) Accessories & Attachments continued on next page UTV

63 UTILITY VEHICLE QUICK REFERENCE MISC 500S 700S Bulb Headlight Bulb Taillight Headlight LH Headlight RH Fuel Cap Oil Filter n/a Air Box Filter Dust Filter Spark Plug Oil Lever Stick MISC 500S 700S Lug Nut Rear Tire (26 x 11 R14) Front Tire (26 x 9 R14) Drive Belt n/a V-Belt n/a OIL All Units UTV Engine Oil W-40 Engine Oil W-90 Gear Lube UTV ACCESSORIES & ATTACHMENTS Front Bumper Rear Bumper Nerf Bars Hitch Hitch Ball - 1" Hitch Ball - 2" LED Light Bar Baja Light Bar Stereo Kit Oil Cooler Switch Mount Panel Worksite Tire Fast Clamp Tiger Trax Season Tracks Clutch Snow Plow Tiger Trax Extension Mounting Brackets for Tiger Trax Exmark Premium Engine Oil UTV Formulation Exmark Premium Engine Oil SAE 0W Exmark Premium UTV Extreme Conditions Gear Lube POWER COMPONENTS Engines 500S has SOHC 36 hp, 4-stroke, 4-valve with EFI. 700S has SOHC 46 hp, 4-stroke, 4-valve with EFI. Displacement 500S has 443cc; 700S has 695cc. Transmission Automatic CVT with EBS, Hi/Lo Range, reverse and park. Drive System 500S has 2/4 WD; 700S has 2/4 WD + Electric Front Differential Lock. Cooling System Liquid with fan. Speed Up to 44 mph (72.4 kmph) on 500S; Up to 55 mph (88.5 kmph) on 700S. Fuel Capacity 8.2-gallons (31.0-L). Steering Manual. Power Steering on UTS700AAC000EP. Odometer Digital. SUSPENSION Front Tires 26 x 9R14. Front Brakes Hydraulic Disc. Front Suspension Double A-Arm. Front Travel 10". Rear Tires 26 x 11R14. Rear Brakes Hydraulic Disc. Rear Suspension Double A-Arm. Rear Travel 10". DIMENSIONS Wheelbase 85". Electrical 28-amps. Dry Weight 1307 on 500S; 1363 on 700S. Total Payload 1100 on 500S; 1500 on 700S. Tow Capacity 1500 lbs. UTV

64 ACCESSORIES & OPTIONS ACCESSORIES SUSPENSION SEAT Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch Fits Radius. Standard on Radius X-Series 124 Exmark has a full range of seat options to help you adjust to a ride that is best for you. AIR RIDE Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers. Model # Application Lazer Z's s/n >790,000. No Pioneer. FULL-SUSPENSION SEAT Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers. Model # Application Lazer Z's s/n >790,000. No Pioneer SEAT COVER Protect your new seat or to make your old one look new. Fabric coated for maximum water resistance and repellency. Cushioned for extra comfort. Elastic cord in bottom hem for custom fit Standard - Fits Radius E-Series Suspension - Fits Radius S-Series & X-Series Suspension Seat A great value in comparison to more expensive full-suspension seats, our CustomRide suspension system easily mounts to your existing EVC operator seat. System features enable operator to customize suspension settings per individual's weight and personal preference Fits all Lazer Z models with S /N 790,000 & above, except Diesel and LZA models. Fits Lazer Z E-Series with S /N with 315,000,000 & above Fits all Lazer Z, CT, HP, AS with S /N below 790, Fits Navigator with S /N 313,000,000 and above. TILT FRAME & 3-D ISOLATION SYSTEM KIT Get full-featured Lazer comfort for your Lazer AS by adding the Tilt Frame & 3-D Isolation System. Designed for ease of maintenance access, the tilt feature maintains a low-profile on four independent isolation mounts to smooth your ride. Standard on LZZ, LZX and LZS s/n 313,000,000 and above Fits Lazer Z models S /N 790,000 & above, excludes LZDS. SUSPENSION SEAT KIT Includes Full Suspension Seat and Tilt Frame Radius E-Series and S-Series SUSPENSION SEAT KIT UPGRADE Includes Tilt Frame and ISO mounts Radius E-Series 125 ACCESSORIES

65 ACCESSORIES & OPTIONS COMMERCIAL " DIAMETER WHEELS For extended cut height, tough terrain or when lowered rolling resistance is needed, this larger-diameter wheel kit improves your productivity. COMMERCIAL 21 MULCH PLUG Easily transition from bagging to mulching. Model # Application Model # Application Fits all Commercial 21's Fits all Commercial 21's. COMMERCIAL 21 COATED BAIL DRIVE Model # Application Fits all Commercial 21's. COMMERCIAL 21 WHEEL WEIGHT KIT Enhance your productivity in wet conditions with this wheel weight kit. Each wheel plate weights 3 pounds to give you excellent performance, even with a full load of grass. COMMERCIAL 21 DECK WEAR KIT Prolong the life of your deck in the toughest conditions with this heavy-duty deck wear kit Fits all Commercial 21's. STANDON ACCESSORIES Model # COMMERCIAL 21 DOOR HANDLE KIT Model # Application Fits all Commercial 21's. Application Fits all Commercial 21's. COMMERCIAL 21 ENGINE GUARD Protect your engine from impact when mowing around low-hanging branches and other obstacles. Model # Application Fits all Commercial 21's. Increase productivity while reducing work load with this pull-behind sulky. Uses an innovative QuikMount system and convenient, spring-loaded latch. Expanded operator deck with foot guard for safer, more comfortable riding Fits Turf Tracer and Viking WALK-BEHIND WEIGHT SET Add weight to the front end of your Exmark walk-behind. Beneficial for use with Exmark StandOn to enhance stability and control. Comes in pairs. Each weighs 9.5 pounds. Excludes Turf Tracer X-Series models. Model # Fits Turf Tracer S-Series and Viking ACCESSORIES

66 ACCESSORIES & OPTIONS 3-BUSHEL BAGGER ANTI-SCALP ROLLER KITS Lightweight and easy to attach, this three-bushel grass bagger fits Exmark side-discharge walk-behinds and most riding mowers. Excludes Commercial 21," Metro 26" Pioneer E-Series, & Phazer. Provides maximum protection from scalping in tough terrain. Model # Application ACCESSORIES GC3602 Fits Walk-Behinds w/ side-discharge, Radius Lazer Z X-, S-, E-Series (not 72") Pioneer S-Series 52" & 60", and Vantage. (VT36 requires adapter Vantage Propane requires Radius 48"/52" requires ) Required for Vantage 36" fit-up. 36" Turf Tracer S-Series with s/n 315,000,000 & above Required for Vantage Propane fit-up Required for Radius 48" and 52" fit-up Applies only to the GC36MC. This adapter is needed for Vantage, Lazer Z s/n 600,00 and above, Pioneer, Quest SP, & Quest s/n 919,999 & below. 12-VOLT POWER ADAPTER Conveniently located for ease of use. Great for phone chargers, or any other operator comfort accessory. Standard on LZX s/n 313,000,000 & above Fits all Lazer Z models with S /N 790,000 & above except Diesel models Fits Lazer Z X-Series & Lazer Z S-Series 72" decks s/n 849,999 and below Fits Lazer Z X-Series & Lazer Z S-Series 60" decks. Fits Vantage 60" unit - left rear corner Fits Turf Tracer X-Series 52" & 60" decks Fits Vantage 36" unit - right front corner Fits Vantage 48" & 52" units - front of deck Fits Rear Discharge units. CUP HOLDER Fits all Vantage models. EQUIPMENT COVER Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It's constructed out of tough 600-denier polyester, making it abrasion and tear resistant. It's elastic opening provides a secure, snug fit Small - Fits Quest (excludes 60") and Phazer units Large - Fits Lazer Z, Quest 60" & all other units excluding 72" decks and Navigator models. ACCESSORIES EXTENDED DRIVE LEVER KIT Improve your elbow room while you operate with extended drive levers. Model # Application Fits Lazer Z models with S /N 790,000 & above. Does not fit Lazer Z D or DS-Series, or Suspension Platform models

67 ACCESSORIES & OPTIONS FLOOR MATS HARNESS ADD-ON ACCESSORY KIT Take the hassle out of dual accessory fit up with this add-on harness Fits Lazer Z E-, S- and X-Series models with S /N 790,000 & above. Fits all Navigator models. For the perfectionist in all of us. Keep your machine s floor pan as nice as the day it was new with these custom-fit floor mats. Lazer Z Quest HITCH KITS Model # Application Fits Lazer Z s/n 790,000 and higher Standard on Suspension Platform models Quest models. Standard on Quest S-Series models. Enables owners to add attachments to their full-size Next Lazer Z models. 80 lb. capacity increases productivity by towing light implements and yard carts Fits all Lazer Z Series models with S /N 790,000 & above except diesel models Both Lazer Z models and Lazer Z AS with S /N below 790, Lazer Z HP and Lazer Z CT S /N 510,000 and above models All Lazer Z DS-Series, D-Series, XS & XP models Pioneer S- and E-Series Quest E-Series. Standard on Quest S-Series. FRONT BUCKET MOUNT Make picking up debris and trash easier with Exmark's handy front bucket mount that attaches to the front of the frame. Model # Application ACCESSORIES Fits Radius - Includes 5-Gallon Bucket and Mounting Bracket Fits Radius - Mounting Bracket Only Fits Radius - 5-Gallon Bucket only GAS LOCK CAP Help to prevent fuel theft or tampering with 3.5 diameter locking fuel caps. Model # Application Fits Lazer Z s/n 790,000 and higher Lazer Z Diesel, Pioneer, Navigator, Stand-On Spreader/Sprayer, Stand-On Aerator JACK & MOUNT RECEIVER Safely and easily access the underside of your zero-turn mower's deck. Once receiver is mounted to frame, jack attaches for smooth lift without hassle or strain, thanks to the comfortable ergonomic design. Built for years of reliability " pivot-foot jack Receiver - Fits Lazer Z X- and S-Series models with S /N 790,000 & above. Fits Lazer Z E-Series 315,000,000 & above. Excludes rear-discharge decks Receiver - Fits Lazer Z E-Series with S /N 920,000 to 314,000,000 and Lazer Z Advantage with S /N 850,000 to 919, Receiver - Fits Lazer Z DS-Series and Pioneer S- and E-Series. LZE and LZX Rear Discharge, also Lazer Z with S /N 790,000 & below Receiver - Fits Vantage 36" Receiver - Fits Vantage 48," 52" & 60" Receiver - Fits Quest SP and Quest with S /N 790,000 to 919, Fits Quest models with S /N above 400,010,500 ACCESSORIES

68 ACCESSORIES & OPTIONS LIGHT KIT Keep mowing after the sun goes down with two brilliant 27-watt halogen bulbs from this Hella Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact and can even take on high-pressure cleaning. With twice the illumination output of a conventional work lamp. The kit also features a pivot base and easy bulb replacement Fits all Lazer Z and Pioneer models with ROPs with S /N 260,000 and above Replacement Bulb Kit (one bulb) for Replacement Bulb Kit (one bulb) for FRPSLKIT Fits all Navigator models Rotary Broom model Vantage model. OPERATOR CONTROLLED DISCHARGE Innovative foot control delivers greater productivity than traditional hand-operated designs. The blocker door opens and closes allowing user to quickly and effectively control discharge when mowing around mulch beds, parked cars, homes or windows. (Infinitely adjustable blocker door.) Easily installs and removes without tools Foot - Fits all Lazer Z UltraCut Series 4 & 6 models. with S /N 790,000 & above. Does not fit Supsension Platform Hand - Fits Radius Hand - Fits Vantage and wide area walks Adapter Required for 36" Vantage " Turf Tracer S-Series with s/n 315,000,000 & above. ACCESSORIES LIGHT KIT - LED Better and brighter than ever, this quick installlight kit keeps your productivity going into the night. Low profile, and impact-resistant, this ROPS mounted accessory emits powerful light without the use of significant amperage capacity Radius models MICRO-MULCH SYSTEM The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping. See page POWER DECK LIFT Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. It's electronic motor features Exmark's signature durability and a low profile design that leaves plenty of trailer space Fits all 48" - 72" Lazer Z models with S /N 850,000 & above. Does not fit Suspension Platform models. ACCESSORIES

69 ACCESSORIES & OPTIONS RED LOCKOUT MODULE Maximize fuel savings on RED equipment units with this easy to install lockout module. Embedded with sophisticated computer technology, this module will keep your mower in "efficient" mode, regardless of mowing conditions Fits Lazer Z X-Series units equipped with RED technology. SEMI-PNEUMATIC TIRE ASSEMBLY Customize your ride with just the right caster tire. SUN SHADE Easily mounts to 2-post foldable Rollover Protection System (ROPS). Made of heavyduty, water repellent canvas for maximum durability. Quickly and easily removable for transport. Fits all Exmark compact and full-size Lazer Z mid-mount mowers and FrontRunner. Does not fit Quest Fits any Exmark model with ROPS (excludes Radius) Fits Radius models. TRASH CONTAINER Conveniently located within easy reach of the operator, this trash container features a 2.5 gallon capacity and a durable, easy-to-clean mesh receptacle Fits Radius Fits Lazer Z 48"/52" Fits Lazer Z 60"/72" TC26 Fits all Lazer Z and Pioneer models Fits Vantage models Fits Quest and Radius models. ACCESSORIES TOUCH UP PAINT n/a Black touch up spray paint - gloss black Red spray paint Red.6 oz liquid bottle ACCESSORIES

70 ACCESSORIES ACCESSORIES & OPTIONS TURF STRIPING KIT Produce beautifully manicured lawns with this durable and easyto-use roller system. Roller now made with high impact, high density polyethylene. No more costly bearings to maintain. Easy height adjustment. *Not for use on Rear Discharge decks Fits 48," 52" & 60" Lazer Z decks with S /N 790,000 & above. Vertical height adjustment and extension rollers on ends Fits 72" Lazer Z decks with S /N 790,000 & above. Vertical height adjustment and extension rollers on ends Fits Pioneer S-Series except for 44" Fits 48," 52" & 60" Lazer Z decks with S /N 790,000 & above Striper Extender Kit for Fits 72" Lazer Z decks with S /N 790,000 & above Striper Extender Kit for Fits Radius QUEST SERIES TURF STRIPING KIT Enhance your striping capabilities with this easy to install drag striper Quest E-Series 42" Series 1 model. Quest units with S /N 920,000 to 999, Quest E-Series 54" model Quest S-Series 34" model Quest S-Series 42" and Quest E-Series 42" Series 2 models Quest S-Series 50" and Quest E-Series 50" model. TURF STRIPING KIT Exmark has an unmatched reputation for delivering its see-it-to-believe-it quality of cut. Now you can enhance the striping performance and produce beautifully manicured lawns with this durable and easyto-use roller system. Allows you to mow and roll at the same time. Constructed of heavy-duty stainless steel. Easily adjusts for varying cutting-height settings. Does not affect ability to get up and over curbs. Easy to service and maintain. Part Number Turf Striping Kit Accessory For all FMD 523, 524, 603, 604 decks on Turf Tracer Hydros-TTX (excludes Turf Ranger ) For all 36" TTHP/TTS models For all 48" and 52" TTHP/TTS models. STRLZ STRLZ60XP STRLZ72 For all full-size 52" Lazer Z models (523 and 524 decks). For all full-size 60" Lazer Z, Lazer Z ASX, Lazer Z AS models and Lazer Z CT 60" (603 and 604 decks) (excludes XP s & XS s). For all 60" Lazer Z XS and XP models. For all 72" full-size Lazer Z, Lazer Z ASX, Lazer Z XS and Lazer Z XP models (724 decks) For all 46", 50" and 56" Series 5 cutting decks. STR605 For all 60" Series 5 cutting decks For all 66" and 72" Series 5 cutting decks. ACCESSORIES

71 ACCESSORIES & OPTIONS NAVIGATOR AUTOMATIC DOOR OPENER KIT Enhance your productivity with this quick opening auto door system Fits all Navigator models. QUEST BAR AND STEP ASSIST KIT Helps you to step on and off of your Quest with ease. The telescoping bar adjusts to your height. Step contains anti-slip tread material and the handle is covered with soft rubber for comfort. ACCESSORIES NAVIGATOR NARROW DRIVE KIT 18 x (pair) Fits Navigators s/n 313,000,000 & above Fits Navigators s/n 312,999,999 & below. NAVIGATOR WHEEL SPACER KIT For S/n 313,000,000 and higher using tire chains in subframe NAVIGATOR FILL REDUCTION KIT Manage clippings between partial mulch and bagging operations. Reduce material collection by 50%. Model # NAVIGATOR DUMP TUBS Debris can be quickly and conveniently managed with our two polyethylene tub inserts. These removable tubs enable the weight of a full, 9.5-bushel hopper to be split and unloaded one tub at a time Fits all Navigator models. NAVIGATOR POWERED DUMP Improve productivity by not having to leave your operator's position with this power dump accessory. A full load of grass can be managed with the push of a button. Or, if dumping by hand is your preference, this accessory automatically disengages and re-engages the hopper without intervention Fits all Navigator models 138 Application Fits all Navigator models. Standard on 670,000 & above Fits all Quest drive lever models with s/n 920,000 & above. WHITE NON-MARKING SIDE BUMPER Perfect for tight, manicured spaces like cemeteries, where leaving behind black rubber marks is not an option. These durable, non-marking bumpers keep your property looking pristine Fits Rear Discharge units. SIDE WEAR BAR KIT WITH FRONT ANTI-SCALP ROLLER Fits Rear Discharge units Fits 60" Rear Discharge units Fits 72" Rear Discharge units. QUEST CARGO CARRIER Perfect for hauling capabilities like mulch, soil, garden tools and other items for working in the yard. No "jack knifing" and it is easy to store Fits all Quest models with s/n 920,000 and above Weight Kit required for drive lever models. FINISH CUT BAFFLES Maximize cut quality in the toughest conditions with this finish cut baffle kit. 139 ACCESSORIES

72 ACCESSORIES & OPTIONS ANTI-SIPHON ASSEMBLY Allows you to fill the tank from potable water source and protects from chemicals being siphoned back into the source. Model # Application Spreader-Sprayer gates. Model # Application MULTI-PURPOSE BAG Allows you to carry up to two-and-ahalf gallon hand-held pump sprayer to provide the ability to apply different spray application. Can also be easily adjusted for smaller uses or removed to fit through CABLE GUARD PROTECTOR Protect your engine cables from foreign objects such as branches and shrub while operating the machine Spreader-Sprayer SPRAYER-SPREADER NOZZLE SPRAYS Red TeeJet Turbo FloodJet TF-VS Brown TeeJet Turbo FloodJet TF-VS2.5 Model # Application Spreader-Sprayer HOPPER SCREEN Two additional hopper screen options allow you to customize your preference based on dry material application Gray TeeJet Turbo FloodJet TF-VS White TeeJet Turbo FloodJet TF-VS Blue TeeJet Turbo FloodJet TF-VS5 A B C Model # Application D ACCESSORIES Small Hole - Spreader-Sprayer Large Hole - Spreader-Sprayer HOSE TRAY This accessory can be added to your spreader-sprayer in order to protect the hose from foreign objects while spraying. SPRAY WANDS Multiple spray wand options are available to customize to your spray preference. A TeeJet PW4000A Pistol Grip w/ metal wand B Valley Industries Blue Handle w/ metal wand C TeeJet Black Handle w/ metal wand ACCESSORIES Model # Application D TeeJet Black Plastic Wand Spreader-Sprayer HOSE TRAY WITH 30 FT EXTENDED HOSE Allows you to step away from the sprayer to spray in bedding areas, tiered landscapes and hard to reach areas. Kit comes with extended hose tray to protect the hose from foreign objects. Model # Application Spreader-Sprayer

73 ACCESSORIES & OPTIONS Fits most vehicles FLOOR MAT Make sure your dress up your store and customer vehicles with these heavy duty mats. Pliable material conforms to a variety of contours and captures mud, water and debris easily. COLLECTION SYSTEMS 2-BAGGER OPTION For all Quest E-Series and S-Series units. For all Pioneer E-Series units with serial #'s 920,000 & above. ( )* For Quest E-Series 42" Series 1 models ( ) For Quest E-Series & S-Series 42" Series 2 models ( ) For Quest E-Series & S-Series 50" Series 2 models ( )* For Quest E-Series 54" models ( ) For Quest S-Series 34" models ( ) For Quest S-Series 60" models ( ) For Pioneer E-Series 48" & 52" models *Requires Mounting Kit and Weight Kit MUD GUARDS Perfect for store vehicles, light-duty landscape vehicles, or even for your own personal ride. Overall unit length with bagger Overall unit width with bagger QT 42" QT 50" PNE 48" PNE 52" 93.0" 93.0" 97.0" 97.0" (236 cm) (236 cm) (246 cm) (246 cm) 53.2" 58.5" 58.0" 62.0" (135 cm) (149 cm) (147 cm) (157 cm) Total bagging system weight 112 lbs (51 kg) 109 lbs (49 kg) 188 lbs (85 kg) 188 lbs (85 kg) Fits most vehicles ACCESSORIES For all Exmark product OIL CHANGE DECALS Help remind your customers to change their engine oil and hydro oil at the right intervals with Exmark Premium Performance products. EXMARK OFFICE CHAIR Take the comfort of mowing straight into the office with Exmark s ergonomical seat. The unsurpassed comfort and support via custom Cut-n-Sew plush foam, an adjustable seat back and heavily padded, adjustable armrests. COLLECTION SYSTEMS Model #

74 COLLECTION SYSTEMS 2-BAGGER OPTION S-Series Bagger (LZUV2B) For all full-size 48" and 52" Lazer Z models with s/n 790,000 & above. ( ) For all Radius models. E-Series Bagger ( ) For all Pioneer S-Series models. ( ) For all Radius models. S-Series (LZUV2B) E-Series ( ) E-Series S-Series Lazer Z 52" Lazer Z 48" PNS 44/48" PNS 52" PNS 60" RAE RAS RAX 48" RAE RAS RAX 52" RAE RAS RAX 60" RAE RAS RAX 48" RAE RAS RAX 52" RAE RAS RAX 60" Overall unit length with bagger " (259.7 cm) " (259.7 cm) 97.0" (246.4 cm) 97.0" (246.4 cm) 98.6" (250.5 cm) 97.9 (249 cm) 97.9 (249 cm) 98.3 (250 cm) 97.9 (249 cm) 97.9 (249 cm) 98.3 (250 cm) Overall unit width with bagger 67.75" (172.1 cm) 62.50" (158.8 cm) 58.0" (147.3 cm) 62.0" (157.5 cm) 74.0" (188 cm) 61.2" (155 cm) 66.1" (168 cm) 74.3 (189 cm) 61.2" (155 cm) 66.1" (168 cm) 74.3 (189 cm) Total bagging system weight 266 lbs (120 kg) 309 lbs (140 kg) 168 lbs (76 kg) 168 lbs (76 kg) 168 lbs (76 kg) 258 lbs (117 kg) 218 lb (99 kg) 218 lb (99 kg) 258 lbs (117 kg) 218 lb (99 kg) 218 lb (99 kg) COLLECTION SYSTEMS Collection Bags 2 commercial-grade, cloth-mesh bags with reinforced bottoms. Total Collection Capacity 8 bushels. Dump Mechanism Manual lift off. Blower Tube 6.0"-diameter, fixed, abrasion-resistant, molded polyethylene. Impeller 5-bladed, 1/4" (6.4mm) thick, abrasion-resistant steel with vertical axis. 13.0" diameter. Impeller Axis Vertical. Impeller Housing S-Series " thick, abrasion-resistant steel. E-Series " thick, steel. Bearings 1" (2.54 cm) sealed, non-greaseable bearings. COLLECTION SYSTEMS

75 COLLECTION SYSTEMS 3-BAGGER OPTION (LZUV3B) For all full-size 60" & 72" Lazer Z models except diesel with s/n 790,000 & above. (UV60 and UV6672) For all full-size 60" & 72" Lazer Z Diesel models. ULTRAVAC QUICK DUMP SYSTEM (LZUVQD7) For all full-size 48" and 52" Lazer Z models with s/n 790,000 & above. LZUV3B UV60 UV6672 Lazer Z 48" Lazer Z 52" Lazer Z 60" Lazer Z 72" Lazer Z (Diesel) 60" Lazer Z (Diesel) 72" Overall unit length with bagger 102.0" (259.1 cm) 102.0" (259.1 cm) Overall unit length with bagger 107.0" (271.8 cm) 110.0" (279.4 cm) 110.9" (281.6 cm) 115.4" (293 cm) Overall unit width with bagger 62.50" (158.8 cm) 67.75" (172.1 cm) Overall unit width with bagger 74.9" (190.3 cm) 87.4" (221.9 cm) 74.9" (190.3 cm) 87.4" (221.9 cm) Total bagging system weight 331 lbs (150 kg) 288 lbs (130 kg) Total bagging system weight 449 lbs (204 kg) 406 lbs (184 kg) 261 lbs (118 kg) 268 lbs (122 kg) Collection Bags 3 commercial-grade, cloth-mesh bags with reinforced bottoms. Total Collection Capacity 13.4 bushels (3 bags and hood). Dump Mechanism Manual lift off. Blower Tube 7.75"-diameter, fixed, abrasion-resistant polyethylene. Impeller 5-bladed, abrasion-resistant steel with vertical axis. 15.0" diameter. Impeller Axis Vertical. Impeller Housing 0.187" thick, abrasion-resistant steel. Bearings 1" (2.54 cm) sealed, non-greaseable bearings. Collection Hopper Commercial-grade steel and polyethylene. Total Collection Capacity 7 bushels. Dump Mechanism Single motion actuation from operator's seat. Blower Tube 6.0"-diameter, fixed, abrasion-resistant, molded polyethylene. Impeller 5-bladed, 1/4" (6.4 mm) thick, abrasion-resistant steel with vertical axis. 13.0" diameter. Impeller Axis Vertical. Impeller Housing 0.187" thick, abrasion-resistant steel. Bearings 1" (2.54 cm) sealed, non-greaseable bearings. COLLECTION SYSTEMS COLLECTION SYSTEMS

76 COLLECTION SYSTEMS COLLECTION SYSTEMS ULTRAVAC QUICK DUMP SYSTEM LZUVQD11 For all full-size 60" & 72" Lazer Z models except diesel with s/n 790,000 & above. UVD60 and UVD6672 For all full-size 60" & 72" Lazer Z Diesel models. Overall unit length with bagger Overall unit width with bagger Total bagging system weight Lazer Z 60" 106.5" (270.5 cm) 75.0" (190.5 cm) 477 lbs (216 kg) LZUVQD11 UVD60 UVD6672 Lazer Z 72" 109.5" (286.2 cm) 87.25" (221.6 cm) 434 lbs (197 kg) Lazer Z (Diesel) 60" 109.4" (278.0 cm) 74.9" (190.3 cm) 333 lbs (151 kg) Lazer Z (Diesel) 72" 113.9" (289.4 cm) 87.4" (221.9 cm) 278 lbs (126 kg) Collection Hopper Commercial-grade steel and polyethylene hopper with rear-discharge door. Commercial-grade, cloth-mesh door panel with molded lower wear panel. Total Collection Capacity 11 bushels. Dump Mechanism Single motion actuation from operator's seat. Blower Tube 7.75"-diameter, fixed, abrasion-resistant polyethylene. Impeller 5-bladed, abrasion-resistant steel; 15.0" diameter. Impeller Axis Vertical for more efficient discharge flow. Impeller Housing 0.187" thick, abrasion-resistant steel. Bearings 1" (2.54 cm) sealed, non-greaseable bearings. Lazer Z X-SERIES (Models with LZZ or LZX Prefix) Serial #'s 790,000 & above Deck Bag Style Quick Dump Completing Kit# 486 LZUV2B LZUVQD LZUV2B LZUVQD LZUV3B LZUVQD LZUV3B LZUVQD Lazer Z S-Series & Lazer Z E-Series (Models with LZS & LZE Prefix) Serial #'s 920,000 & above Lazer Z Advantage Series (Models with LZA Prefix) Serial #'s 850,000 to 919,999 Deck Bag Style Quick Dump Lazer Z DS-Series (Models with LZDS Prefix) Serial #'s 312,000,000 & above Lazer Z D-Series (Models with LZD Prefix) Serial #'s 920,000 to 999,999 Lazer Z XS (Models with LZX Prefix) Serial #'s 790,000 to 919,999 Deck UV Model # Completing Kit# Completing Kit# 484 LZUV2B LZUVQD LZUV2B LZUVQD LZUV3B LZUVQD Propane LZUV3B LZUVQD LZUV3B LZUVQD Lazer Z Advantage Series X (Models with LZAS Prefix) Serial #'s 850,000 to 919,999 Lazer Z Advantage Series (Models with LZAS Prefix) Serial #'s 790,000 to 849,999 Deck Bag Style Quick Dump Completing Kit# 484 LZUV2B LZUVQD LZUV2B LZUVQD LZUV3B LZUVQD LZUV3B LZUVQD Floor Pan Weight* 605 UV * 605 UVD * 665 UV * 665 UVD * 725 UV * 725 UVD * COLLECTION SYSTEMS 148 *Floor Pan Weight is only needed on Liquid-Cooled XS Units. 149

77 COLLECTION SYSTEMS Radius E- and S-Series RAE & RAS (serial 4,000,000 and higher) Deck Bag Style Completing Kit# Belt # Included in completing kits Pioneer S-Series* (Models with PNS Prefix) Serial #'s 920,000 & Above Deck Bag Style Quick Dump (UVE) (UVE) Completing Kit# (UVE) (UVE) (UVE) (UVE) Radius X-Series RAX (serial 4,000,000 and higher) Deck Bag Style Completing Kit# Belt # Included in completing kits ( (UVE *The will fit all PNS deck sizes except 60". The will fit all PNS deck sizes including 60". Quest SP (Models with QSP Prefix) Serial #'s 850,000 to 919,999 Deck Bag Style Quick Dump (UVE) (UVE) Completing Kit# (UVE) (UVE) (UVE) (UVE) *The and will fit all QSP deck sizes. Non-Powered Baggers QST (serial 670, ,999) PNE (serial 920,000 and higher) Deck Bag Style Quick Dump Completing Kit# (bagger blades) QST QST PNE COLLECTION SYSTEMS QST PNE QST old bagger fits only 48 & 52 Non-Powered Baggers QT/QTE and QTS (serial 920,000 and higher) Deck Bag Style Quick Dump Completing Kit# QTE n/a QTS n/a QTE n/a QTS n/a COLLECTION SYSTEMS

78 COLLECTION SYSTEMS COLLECTION SYSTEMS ULTRAVAC BLOWER DRIVE BELTS 44" Drive Belt LCT, LHP, PHZ " Drive Belt PNS " Series 5 Drive Belt LHP " Drive Belt LCT, LHP, Lazer Z 790,000 & above " Drive Belt PNS " Series 5 Drive Belt LHP " Drive Belt LHP, LZ, LCT, LAS, FR " Drive Belt PNS " Series 5 Drive Belt LHP " Drive Belt LZ, LAS, FR " Series 5 Drive Belt LZ, LXS, PNS " Series 5 Drive Belt LZ, LXS " Drive Belt LZ, LAS, FR " Series 5 Drive Belt LZ, LXS Cloth Bag (LHP models) Cloth Bag (LCT models) Cloth Bag (Lazer Z models, PNS & Radius) Cloth Bag (QST, PNE) Cloth Bag (QT, QTE, QTS) Cloth Bag (GC3602) Cloth Bag (EC21) Cloth Bag (EC30) Bag and Frame Assembly (LHP models) Bag and Frame Assembly (Lazer Z models, PNS & Radius) Bag and Frame Assembly (LCT) Bag and Frame Assembly (QST, PNE) Bag and Frame Assembly (QT, QTE, QTS) MICRO-MULCH & MULCHING HINTS Solve clipping disposal problems, and recycle valuable nutrients. Micro-Mulch accessory turns any side-discharge Exmark into a mulching mower. A B A B Patented flow-control baffles improve the quality of cut, reduce grass and leaf blowout and lessen horsepower requirements when cutting in heavy grass. Mulching baffles enclose each blade in an individual cutting chamber. Series 5 mulch kits include pre-installed hardware. Mulching capability of Exmark mowers will be greatly enhanced by following a few simple recommendations: 1. Proper ground speed is critical to efficient mulching. 2. Blade sharpness is also vital for proper mulching. Extra blades should be available for change as necessary. 3. If mowing during the heavy growing season or mowing tall, heavy grass, mowing or crosscutting the area a second time will greatly enhance the quality of cut and evenly distribute any clumps of mulched grass left from the first pass. 4. To achieve the optimum cut with 32", 36" and 48" fixeddeck units, use three blade spacers between the blade and spindle (on models s/n 102,000 and above) or four blade spacers (on models s/n 101,999 or below). 5. Due to the fact that mulching normally requires more horsepower than side-discharge operation, depending on cutting conditions, higher-horsepower models may provide more efficient mulching capability. 153 The Micro-Mulch System is available on all Exmark walk-behind and riding mowers. MULCHING

79 MULCHING MULCH KIT CHARTS Part Number Description EC MG Metro VH TTS TTHP FMD MHP TTX VT NV FR LZDS LZD LXS LXP LZX LZZ LZ LZE LZS LZAS LZA LAS LHP LCT PH PNS QSP PNE RAE QST QT QTE QTS QSS RAE RAS RAX Serial Number Range MK26 26" Mulch Kit Fits All Units " Mulch Kit Fits All Units MK322 32" Mulch Kit 102,000 & Above " Mulch Kit Fits All Units MK343 34" Mulch Kit Fits All Units MK362 36" Mulch Kit 115,000 & Above MK363Q*** 36" Mulch Kit 314,999,999 & Below " Mulch Kit 315,000,000 & Above " Mulch Kit Fits All Units MKNAV42 42" Mulch Kit Fits All Units " Mulch Kit Fits All Units " Mulch Kit (421) 920,000 & Above " Mulch Kit (422) 313,000,000 & Above MK443Q 44" Mulch Kit Fits All Units " Mulch Kit Fits All Units MK465 46" Mulch Kit (Series 5) 600,000 & Above 314,999,999 & Below MK483Q 48" Mulch Kit 160,000 & Above Fits All Units " Mulch Kit 315,000,000 & Above MK486 48" Mulch Kit (Series 4 & 6) Fits All Units MKNAV48 48" Mulch Kit Fits All Units " Mulch Kit Fits All Units MK505 50" Mulch Kit (Series 5) 600,000 & Above " Mulch Kit (501) Fits all units " Mulch Kit (502) Fits all units Fits All Units*** 130,000 to 319,999 MK523Q*** 52" Mulch Kit 130,000 to 259, ,000, to 599, ,000 & Above MK526*** 52" Mulch Kit (Series 4 & 6) 260,000 & Above*** Fits All Units " Mulch Kit Fits All Units " Mulch Kit (541) Fits All Units MK565 56" Mulch Kit (Series 5) 600,000 & Above " Mulch Kit Fits All Units Fits All Units 600,000 & Above MK603Q 60" Mulch Kit 130,000 to 319, ,000 to 189, ,000 & Above MK605 60" Mulch Kit (Series 5) 600,000 to 789, ,000 thru 599,999** 190,000 thru 599,999; 670,000 MK606*** 60" Mulch Kit (Series 4 & 6) & Above*** 320,000 & Above Fits All Units MK665 66" Mulch Kit (Series 5) 600,000 & Above MK725 72" Mulch Kit (Series 5) 600,000 & Above All Units thru 599,999*** All Units thru 599,999; MK726*** 72" Mulch Kit (Series 4 & 6) 790,000 & Above*** Fits All Units DECK SERIES GUIDE Series 6 = UltraCut Series 6 Deck Series 5 = Series 5 Deck Series 4 = UltraCut Series 4 Deck (Blade bolt diameter changed at s/n 540,000) (s/n 540,000 and higher use 15/16" diameter, red colored blade) NOTE: *** If you have a machine with s/n below 540,000, your mulch kit will require a blade with 5/8" arbor hole not provided in standard kit. 155 MULCHING

80 PERFORMANCE PRODUCTS PREMIUM ENGINE OIL Using a synthetic formulation far more stable and robust than inexpensive oil from your local auto parts store or big retail outlet. Exmark premium is the right choice for your mower. SAE 10W-30/SAE Quart bottle gallon drum 20W Quart bottle 10W Quart bottle PREMIUM HYDRO OIL Designed for today's more demanding hydraulic systems to enhance control performance. Delivers superior anti-wear protection and twice the shear stability of competing oils. For use with any Exmark hydraulic system. Model # Application Quart bottle Gallon container Gallon drum HYDRO MAINTENANCE KIT - Lazer Z Models Includes 1 gallon jug of Exmark Premium Hydro Oil, and 2 hydro filters. 0W Quart bottle UTV Formulation Quart bottle PREMIUM FUEL TREATMENT Engineered to rapidly dissolve carbon & varnish deposits. Quickly cleans injectors, rings, carburetor, valves and fuel line. One treatment delivers immediate results for older engines. Regular use helps engines last longer at peak performance. E10 Ethanol approved oz. bottle oz. bottle PREMIUM GEAR LUBE SAE 80W-90, designed to keep your UTV performing at its peak Shear stable, hypoid gear lube Includes a premium additive system to combat wear, oxidation, rust & corrosion Model # Application Quart Bottle Model # Application For use with Lazer Z models s/n 790,000 and above or 2009 model year and later. HYDRO MAINTENANCE KIT - Radius Models Includes 5 quarts of Exmark Premium Hydro Oil, and 2 hydro filters. Model # Application For use with Radius Models ENGINE MAINTENANCE KIT Contains everything a do-it-yourselfer needs to keep their Exmark running like new. Includes oil, oil filter, fuel filter, air filter, spark plug and fuel treatment Exmark single-cylinder engine (Quest and Radius) Exmark V-Twin engine (Quest and Radius) Kohler engine (Radius) Kawasaki engine (Radius) MISC MISC