Exmark Mfg. Co., Inc. / 2101 Ashland Avenue / P.O. Box 808 / Beatrice, NE / Call / Fax

Size: px

Start display at page:

Download "Exmark Mfg. Co., Inc. / 2101 Ashland Avenue / P.O. Box 808 / Beatrice, NE / Call / Fax"

Myron Poole
6 years ago
Views:

Exmark Mfg. Co., Inc. / 2101 Ashland Avenue / P.O. Box 808 / Beatrice, NE 68310-0808 / Call 402.223.

Actual products offered for sale may vary in use, design, required attachments and safety features.

without notice and without incurring obligation. See your dealer for details on all of our warranties.

UltraVac are registered trademarks, and Viking, UltraCut, Micro-Mulch and CustomRide are trademarks of

Kawasaki is a registered trademark of Kawasaki Motors Corp.

Kubota is a registered trademark of Kubota Engine America Corp.

1 Exmark Mfg. Co., Inc. / 2101 Ashland Avenue / P.O. Box 808 / Beatrice, NE / Call / Fax Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. We reserve the right to improve our products and make changes in specifi cations, designs and standard without notice and without incurring obligation. See your dealer for details on all of our warranties. Exmark, Turf Tracer, Lazer Z, Metro, Pioneer, Vantage, Phazer, Quest, Exmark Parts Plus, Navigator, and UltraVac are registered trademarks, and Viking, UltraCut, Micro-Mulch and CustomRide are trademarks of Exmark Mfg. Co., Inc. Kohler is a registered trademark and Kohler Command is a trademark of Kohler Co. Kawasaki is a registered trademark of Kawasaki Motors Corp. Turf Mate, Turf Master, Turf Saver and Multi-Trac are registered trademarks of Carlisle Tire & Rubber Co. Kubota is a registered trademark of Kubota Engine America Corp. Honda is a registered trademark of American Honda Motor Co., Inc. Hydro-Gear is a registered trademark of Hydro-Gear Exmark Manufacturing Company, Inc. All rights reserved. Printed in the U.S.A Form No

2 WHEREDOES PRIDE COME FROM? 2 3

3 ADVANTAGE ADVANTAGE IT COMES FROM THE DESIRE TO MAKE THE LANDSCAPE MORE BEAUTIFUL. EXMARK DIFFERENCE If you re an Exmark owner, chances are, you had a hand in building your machine. Whether you know it or not, you re the reason the deck is deeper, the controls are smoother and the parts are fewer. Before we build machines, we go into the field and ride alongside our customers. We get sweaty. We get tired. We get the best feedback. Then we gather our findings and get busy putting everything we learned into each nut and bolt. But that s only part of the story. Our lines of communication are always open. Along with our tireless poking and prodding, we re supported by our incredible customer service department. Those guys always do us proud. So if you want to tell people you help build the best commercial-grade machines in the industry, go ahead. It s not too far from the truth. 4 5

QUALITY QUALITY IT COMES FROM NEVER SETTLING, NOT WITH ANYONE

EXMARK COMMERCIAL QUALITY If you ve ever used an Exmark, then

low-maintenance, commercial-grade machines.

If you re reading this thinking, Who is Exmark?

mowers. Jump on. Fire it up. Take it in the field.

If you have any questions, speak to one of our Exmark dealers.

All of our dealers are straight-shooters who take pride in

4 QUALITY QUALITY IT COMES FROM NEVER SETTLING, NOT WITH ANYONE OR ANYTHING. EXMARK COMMERCIAL QUALITY If you ve ever used an Exmark, then we don t need to tell you that they re high-quality, low-maintenance, commercial-grade machines. You already know from experience that they re exceedingly durable and incredibly productive. And that they require little maintenance. If you re reading this thinking, Who is Exmark? we invite you to get to know us by test-driving one of our mowers. Jump on. Fire it up. Take it in the field. We re confident that you ll be impressed. If you have any questions, speak to one of our Exmark dealers. And don t be surprised if you re impressed with them as well. All of our dealers are straight-shooters who take pride in helping pros any way they can. That s why we partner with them. And with a strong dealer network, it shouldn t be hard to find a local one in your area. Then you ll get the full picture of why Exmark mowers are preferred by pros more than any other brand. 6 7

THE CUT THE CUT IT COMES FROM THE TIRELESS PURSUIT OF THE PERFECT CUT.

Exmark s, hydro drive systems and spindles are a testament to that. They make our mowers more durable and more reliable and a heck of a lot more popular.

It s exclusively designed to contain fewer parts and pieces, reducing maintenance and increasing durability. Take its unitized pump and wheel motor.

And the tow valves can be operated without the use of tools, not to mention that the customized valving provides smooth control. Like we said, painless.

That s why we worked hard in perfecting our cutting.

5 THE CUT THE CUT IT COMES FROM THE TIRELESS PURSUIT OF THE PERFECT CUT. T CUTTING TECHNOLOGY If you want to build the very best commercial-grade machines, start with the very best commercial-grade components. Exmark s, hydro drive systems and spindles are a testament to that. They make our mowers more durable and more reliable and a heck of a lot more popular. HYDRO DRIVE SYSTEM Our hydro drive system is how most things should be: painless. It s exclusively designed to contain fewer parts and pieces, reducing maintenance and increasing durability. Take its unitized pump and wheel motor. They eliminate hoses and potential leak points. And the tow valves can be operated without the use of tools, not to mention that the customized valving provides smooth control. Like we said, painless. DECK It doesn t matter how much experience you have. It doesn t matter how many hours you clocked in the field. If the cut doesn t look good, you re done. That s why we worked hard in perfecting our cutting. Let s take a look inside: The patented flow-control baffles accelerate airflow under the deck, resulting in the easy movement of materials and a more even discharge. We ve optimized the blade-tip speed, which optimizes discharge distance and uniformity. All the components in our deck work together to deliver a standout cut, job after job after job. SPINDLES Meet the superheroes of spindles. Their superpowers lie in their simplicity and durability. Made from tough cast aluminum that houses sealed ball bearings, they can withstand the effects of impact and moisture. They re also maintenance-free yet another superpower. 8 9

RIDERS RIDERS A RESIDENTIAL RIDER DESIGNED TO IMPRESS.

It s designed for the guy who wants his yard to stand out in his county, not just the neighborhood.

You better believe the Quest lives up to the family name.

It not only cuts grass beautifully, but also double- cuts your mowing time, which is also a

The coil spring seating system provides a smooth ride over uneven terrain.

A B C D TRACTION AND HANDLING: The Quest s parts and pieces are arranged in its frame in a way that

6 RIDERS RIDERS A RESIDENTIAL RIDER DESIGNED TO IMPRESS. What happens when you come from a family of overachievers? You do everything you can to get noticed. Just like this zero-turn mower. The Quest delivers the kind of cut that gets a major nod from the lawn enthusiast. It s designed for the guy who wants his yard to stand out in his county, not just the neighborhood. Wherever the Quest mows, it results in a million-dollar cut. You better believe the Quest lives up to the family name. MODELS INCLUDE: Quest E-Series Quest S-Series CUT QUALITY: The cutting deck works hard to deliver the exclusive Exmark cut in no time. It employs serious cutting technology that banishes stragglers and cutting. It not only cuts grass beautifully, but also double- cuts your mowing time, which is also a beautiful thing. SEAT: On the Quest, comfort starts with the seat and seating suspension. The coil spring seating system provides a smooth ride over uneven terrain. Quest users will find that being comfortable while mowing makes the task seem even shorter. A B C D TRACTION AND HANDLING: The Quest s parts and pieces are arranged in its frame in a way that optimizes traction with a lower center of gravity, making it an incredibly smooth ride. Its zero-turn technology will have you easily maneuvering around the landscape, for an even faster finish. See pages 42 and 43 for Quest specs. 10 QUEST A B C D high-quality threaded pneumatic tires for a smoother ride single-point rake adjust for easy deck adjustment wash-out port for easy cleaning exclusive Exmark floor mat for reduced vibrations 11

RIDERS RIDERS A MOWER WITH A HEAD FOR NUMBERS. It s a given that all Exmark mowers are exceptional machines that hold their value.

It delivers precision, durability, comfort and traction with every job. And, of course, one heck of a cut. Do the math and compare for yourself.

The system includes charge pumps, steel-cut gears and shock valves that deliver years of reliable service.

It s equipped with Exmark s patented deep cutting deck that improves cutting efficiency and delivers attention-grabbing results.

7 RIDERS RIDERS A MOWER WITH A HEAD FOR NUMBERS. It s a given that all Exmark mowers are exceptional machines that hold their value. But of the rider family lineup, the Pioneer sets itself apart. It s one heck of a workhorse that has made its mark in the value price category. It delivers precision, durability, comfort and traction with every job. And, of course, one heck of a cut. Do the math and compare for yourself. You ll realize that no other similarly equipped machine comes close to the Pioneer s commercial-grade performance and quality. After all, it s an Exmark. MODELS INCLUDE: Pioneer E-Series Pioneer S-Series HYDRO-GEAR : The Pioneer s hydrostatic drive system makes the Pioneer S-Series a smooth ride. The system includes charge pumps, steel-cut gears and shock valves that deliver years of reliable service. CUTTING DECK: This machine takes its job of cutting grass seriously. It s equipped with Exmark s patented deep cutting deck that improves cutting efficiency and delivers attention-grabbing results. A B C D FRAME: Fewer parts and pieces that s one of this mower s strengths. With a simplified design and a reduction in the number of moving parts, this machine promises to be low in maintenance and high in reliability. Really high. See pages 44 and 45 for Pioneer specs. 12 PIONEER A B C D 7-gallon single-point fuel tank transport lock for convenient trailering bolstered seats with coil spring suspension greaseless spindles eliminate yearly greasing 13

RIDERS RIDERS THE ONE AND ONLY LAZER Z. Ever talk to a Lazer Z owner about his machine? No?

Just keeps going and going, No way am I going to use anything else, and Don t even think about jumping on my machine.

Like its simple design, resulting in fewer parts and less maintenance.

And we can t forget about the increased comfort factor. See, so many things to like about the Lazer Z.

HYDRO DRIVE SYSTEM: This system has no hoses, with reduced leak points and only annual maintenance required.

UNIBODY FRAME: Studying automotive manufacturing helped us construct this lighter and more durable frame.

As an added perk, it s made the machine easier to handle.

8 RIDERS RIDERS THE ONE AND ONLY LAZER Z. Ever talk to a Lazer Z owner about his machine? No? In conversation, owners usually throw out comments like, Best machine ever, It s a workhorse. Just keeps going and going, No way am I going to use anything else, and Don t even think about jumping on my machine. What causes them to make such strong statements? With the Lazer Z, it could be a number of things. Like its simple design, resulting in fewer parts and less maintenance. And its undeniable cut quality that fosters pride from the operator and envy from everyone else. And we can t forget about the increased comfort factor. See, so many things to like about the Lazer Z. Maybe you should ride one and chime in with your very own strong statement. HYDRO DRIVE SYSTEM: This system has no hoses, with reduced leak points and only annual maintenance required. It also boasts a serviceable pump and motor. When used with exclusive Exmark hydro oil, it becomes even more maintenance-free. UNIBODY FRAME: Studying automotive manufacturing helped us construct this lighter and more durable frame. With it, we can position the body lower to the ground, improving center of gravity, balance and traction in most conditions. As an added perk, it s made the machine easier to handle. A B C D MODELS INCLUDE: Lazer Z E-Series Lazer Z S-Series Lazer Z X-Series Lazer Z DS-Series (see next page). EFI units available Propane units available SEATING SYSTEM: Forget the seat when you can have a seating system. It has a 3-dimensional motion isolation design that reduces vibrations, bumps and jarring. And rubber mounts that allow 0.5-inch free movement in all directions, resulting in a smoother ride and a back that experiences less pain. See pages 46 to 48 for Lazer Z specs. 14 LAZER Z A B C D rear-sloping ROPS bar deflects branches from operator panhard rod used in race cars eliminates deck sway single-point height adjust matches cutting height on fleet easy-to-read operator diagnostics 15

RIDERS RIDERS RED AND GREY ON THE OUTSIDE, GREEN ON THE INSIDE.

then you haven t met the Lazer Z diesel.

Its heavy-duty frame and engine cooling system keep it from early retirement so it can continue delivering a

So what you have here is a productive machine that s focused on doing its part in keeping the planet beautiful.

for a smoother ride over uneven ground. SERIES 5: Here s a deck that s afflicted with grass perfectionism.

in unison, leaving no stragglers behind. A B C D SEAT SUSPENSION: Comfort comes standard on this diligent worker.

Doing good for the environment and doing good for your body that s just how this mower rolls.

9 RIDERS RIDERS RED AND GREY ON THE OUTSIDE, GREEN ON THE INSIDE. If you don t believe that a mower can strike a balance between commercial mowing and environmental consciousness, then you haven t met the Lazer Z diesel. It s a hard-working machine that s ready to tackle the grass but leave the environment intact. Its heavy-duty frame and engine cooling system keep it from early retirement so it can continue delivering a picture-perfect cut, even under the toughest conditions. Its large drive tires optimize traction and stability. So what you have here is a productive machine that s focused on doing its part in keeping the planet beautiful. LARGER DRIVE TIRES: The Lazer Z diesel sports 4-ply Multi-Trac drive tires that optimize traction and stability, for a smoother ride over uneven ground. SERIES 5: Here s a deck that s afflicted with grass perfectionism. Its Exmark-exclusive baffle design and deep platform make each blade of grass stand at attention as the blades cut in unison, leaving no stragglers behind. A B C D SEAT SUSPENSION: Comfort comes standard on this diligent worker. Elastomeric Vibration Control (EVC) material and suspension respond to bumps and jars, providing better cushioning. Doing good for the environment and doing good for your body that s just how this mower rolls. See page 49 for Lazer Z DS-Series specs. 16 LAZER Z DS-SERIES A B C D radiator position and wavy screen ensure efficient cooling canister air filtration system improves productivity iso-mounted diesel engine reduces vibrations welded, heavy-duty steel frame designed for extreme mowing conditions 17

RIDERS RIDERS A MOWER THAT FITS IN ALMOST ANYWHERE, INCLUDING ON HIGH-END PROPERTIES.

They want each blade to be in place. And they don t want to see any grass clippings. The Navigator was designed for such a job.

higher ground speed and undeniable productivity.

GEARBOX: The splined PTO shaft, with its high-speed U-joints and shear pins, provides complete blade drive protection.

DRIVE CONTROL SYSTEM: Even with its large dedicated bagger in the back and a hefty frame, the Navigator practically glides over

EFI units available A B C D COLLECTION SYSTEM: Reduce emptying and job time with the large 9.5-bushel hopper.

10 RIDERS RIDERS A MOWER THAT FITS IN ALMOST ANYWHERE, INCLUDING ON HIGH-END PROPERTIES. Owners of high-end properties are a particular bunch. They want their lawns to be perfectly manicured. They want each blade to be in place. And they don t want to see any grass clippings. The Navigator was designed for such a job. With its exclusive Exmark deck and dedicated collection system, it leaves behind nothing but that straight out of the pages of a magazine lawn that customers demand. But let s not forget that this mower comes with all of the advantages of being an Exmark, including better operator comfort, higher ground speed and undeniable productivity. Those are the kinds of benefits that impress a certain discriminating customer you. GEARBOX: The splined PTO shaft, with its high-speed U-joints and shear pins, provides complete blade drive protection. And if you ever need to disconnect it, a drive shaft coupling near the engine allows for speedy removal. DRIVE CONTROL SYSTEM: Even with its large dedicated bagger in the back and a hefty frame, the Navigator practically glides over the landscape. Its exclusive control system allows for smooth maneuverability, even at higher mowing speeds. EFI units available A B C D COLLECTION SYSTEM: Reduce emptying and job time with the large 9.5-bushel hopper. Attached is a discharge diffuser with an exclusive baffle design that more evenly fills the hopper from rear to front. Even better, the 18% higher blade tip speed slices grass into finer particles, increasing the hopper s load. See page 50 for Navigator specs. 18 NAVIGATOR A B C D exclusive fill-reduction system provides bagging flexibility full-floating deck design minimizes scalping feather-touch control system enhances precision independent gear-reduction wheel motors increase control 19

RIDERS RIDERS RISE ABOVE. If you re a stand-on kind of guy, then here s a mower that stands out from the rest.

from job to job to job. But comfort isn t the only benefit going for it.

handling. Of course you can t forget about the kind of cut it delivers a cut that gives your goose bumps goose bumps.

self-compensating suspension allows pros of all shapes and sizes to stand in comfort.

STEERING SYSTEM: The ergonomically designed control system, called the Limited Variable Speed bar, includes an adjustable

The sides of the controls are angled to accommodate the natural position of the hands and wrists.

11 RIDERS RIDERS RISE ABOVE. If you re a stand-on kind of guy, then here s a mower that stands out from the rest. With its large operator platform and ergonomic levers, the Vantage is designed to keep you comfortable all day as you move from job to job to job. But comfort isn t the only benefit going for it. It s chock-full of everything that s characteristically Exmark: durability, reliability, ruggedness, superior traction and handling. Of course you can t forget about the kind of cut it delivers a cut that gives your goose bumps goose bumps. EFI units available OPERATOR PLATFORM: The Vantage s superior weight distribution and larger, rubber platform with self-compensating suspension allows pros of all shapes and sizes to stand in comfort. And if you feel like stretching your legs, the platform folds up, turning the stand-on into a walk-behind. STEERING SYSTEM: The ergonomically designed control system, called the Limited Variable Speed bar, includes an adjustable front reference bar that can vary the top-end speed of the machine. The sides of the controls are angled to accommodate the natural position of the hands and wrists. A B C D TRACTION AND HANDLING: For better weight distribution, the heaviest components are positioned in the front while the operator stands behind the tires. The mower s wide stance allows the operator to shift his body weight in response to the changing landscape, making it a smoother ride over varying terrain. See page 51 for Vantage specs. 20 VANTAGE A B C D rubber heat shield separates user from drive system heat heavy-duty muffler guard reduces muffler wear and tear UltraCut deck ensures beautiful results with each pass adjustable rear tire stance improves stability 21

SPECS SPECS RIDING MOWERS MODEL NAME Quest E-Series Quest S-Series Pioneer E-Series Pioneer S-Series Lazer Z E-Series Lazer Z S-Series DECK SIZE 42 50 50 48 52 44 48 52 60 48 52 60 48 52 60 72 ENGINE

Command EFI Kawasaki V-Twin Kohler Command EFI Kawasaki V-Twin Kawasaki V-Twin ENGINE MODEL FR651V FR691V FR691V FR651V FR691V FX600V FX651V CV680 CV740 FX600V FX691V CV740 FX651V CV680 FX691V CV740

12 SPECS SPECS RIDING MOWERS MODEL NAME Quest E-Series Quest S-Series Pioneer E-Series Pioneer S-Series Lazer Z E-Series Lazer Z S-Series DECK SIZE ENGINE BRAND Kawasaki V-Twin Kawasaki V-Twin Kawasaki V-Twin Kohler Command Kohler Command Kawasaki V-Twin Kohler Command Kawasaki V-Twin Kohler Command Kawasaki V-Twin Kohler Command Kohler Command Kohler Command EFI Kawasaki V-Twin Kohler Command EFI Kawasaki V-Twin Kawasaki V-Twin ENGINE MODEL FR651V FR691V FR691V FR651V FR691V FX600V FX651V CV680 CV740 FX600V FX691V CV740 FX651V CV680 FX691V CV740 CV740 ECV730 FX801V Propane ECV749 FX801V FX801V Propane CHASSIS Unibody Riveted 10-ga. steel Unibody Welded Heavy-duty 2" square tubular steel Unibody Welded Heavy-duty 2" square tubular steel Unibody Welded Heavy-duty 1.5" x 3" Tubular steel Unibody Welded Heavy-duty 1.5" x 3" tubular steel DECK SYSTEM Exmark Series 1 Stamped steel deck 4" deep Cutting heights from 1.5" 4.5" Exmark Series 2 fabricated steel deck 4" deep Cutting heights from 1.5" 4.5" UltraCut Series 4 4" deep deck Cutting heights from 1.5" 5" Hex-style spindle blade driver Chain support and transport lock UltraCut Series 3 5.0" deep deck Cutting heights from 1.5" 5" Wide-flange cutter housings with spindle driver Chain support and transport auto-lock UltraCut Series 4 4" deep deck Cutting heights from 1.5" 5" Hex-style spindle blade driver Chain support and transport lock UltraCut Series 4 5.5" deep deck Cutting heights from 1" 4.5" Wide-flange cutter housings with spindle driver Chain support and transport auto-lock Single-point, finite height adjustment UltraCut Series 4 5.5" deep deck Cutting heights from 1" 5.5" Standard-duty cutter housings Wide-flange cutter housings with spindle driver Chain support with side spring and transport auto-lock Single-point, finite height adjustment Patented deck support struts PTO 80 ft-lbs 125 ft-lbs 125 ft-lbs 125 ft-lbs 175 ft-lbs 175 ft-lbs 200 ft-lbs 200 ft-lbs SPEED 0-7 mph 0-7 mph 0-7 mph 0-8 mph 0-9 mph 0-8 mph 0-10 mph DRIVE SYSTEM ZT2100 Integrated transmission ZT2200 Integrated transmission ZT2800 Integrated transmission ZT2800 Integrated transmission ZT3100 Integrated transmission Dual Hydro Gear ZT3400, hydro-static transmission Exmark exclusive Parker unitized pump and wheel motors No hoses 12cc pumps Exmark exclusive Parker unitized pump and wheel motors No hoses Integrated cooling fans 12cc pumps FUEL CAPACITY 2.9-gallon Single fill location 2.9-gallon Single fill location 7-gallon Single fill location 7-gallon Single fill location 8-gallon Single fill location 12-gallon Single fill location 8-gallon capacity 10.3-gallon propane tank 12-gallon Single fill location 10.3-gallon propane tank SEAT High-back foam padded seat Commercial-grade high-back seat Commercial-grade high-back seat Commercial-grade high-back seat Commercial-grade high-back seat Commercial-grade high-back seat Deluxe, two-tone bolstered seat with Elastomeric Vibration Control (EVC) material DRIVE TIRES 18 x ply Turf Tech TL 20 x ply Turf Master 20 x 8-10 Turf Master 22 x Kenda Tires 23 x Kendra 22 x Turf Master 23 x Turf Master 23 x Turf Master 24 x Turf Master FRONT CASTER TIRES 350/410 x 4 Smooth tread Pneumatic 13 x 5 ribbed tread Pneumatic 13 x 5 Ribbed tread Pneumatic 13 x 5-6 Smooth-tread Pneumatic 13 x 5-6 Smooth-tread Pneumatic 13 x Smooth-tread Pneumatic 12 x 5-6 Smooth-tread Pneumatic 13 x Pneumatic 13 x Smooth-tread Semi-pneumatic 13 x Smooth-tread Semi-pneumatic 13 x Smooth-tread Semi-pneumatic 13 x Smooth-tread Semi-pneumatic 13 x Smooth-tread Semi-pneumatic INSTRUMENTATION Optional hour meter Optional hour meter Standard hour meter Standard hour meter Operational diagnostics Integral fuel gauge and hour meter Operational diagnostics Integral fuel gauge and hour meter MODEL # QTE651KA421 QTE691KA501 QTS691KA502 PNE651KA482 PNE691KA522 PNS600KA443 PNS651KA483 PNS680KC523 PNS740KC604 LZE600KA484 LZE691KA524 LZE740KC604 LZS651KA484 LZS651KA484CA EFI unit Propane unit LZS680KC524 LZS691KA524CA LZS740KC524 LZS740KC604CA LZS740KC604 LZS730EKC604 LZS801PKA604 LZS749EKC724 LZS801KA724 LZS801PKA

CV740 ECV749 FX801V CV940 CV980 CV940 CV980 D902 CV640 CV740 ECV730 FS541V FS651V FS691V FS691V ECV730 ECV740 CHASSIS Unibody Welded Heavy-duty 1.

0" Strategically located, continuous-force counterweight springs Welded Heavy-duty 1.5" x 3" Tubular steel DECK SYSTEM UltraCut Series 6 5.5"-deep deck Cutting heights from 1" 5.

13 SPECS SPECS RIDING MOWERS MODEL NAME Lazer Z X-Series Lazer Z DS-Series Navigator Navigator Decks Vantage DECK SIZE ENGINE BRAND Kohler Command Kohler Command Kohler EFI Kawasaki V-Twin Kohler Command Kohler Command Kubota Diesel Kohler Command Kohler Command EFI Kawasaki V-Twin Kawasaki V-Twin Kawasaki V-Twin Kohler EFI Kohler EFI ENGINE MODEL CV680 CV740 CV740 ECV749 FX801V CV940 CV980 CV940 CV980 D902 CV640 CV740 ECV730 FS541V FS651V FS691V FS691V ECV730 ECV740 CHASSIS Unibody Welded Heavy-duty 1.5" x 3" tubular steel Welded Heavy-duty tubular steel Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0" Strategically located, continuous-force counterweight springs Welded Heavy-duty 1.5" x 3" Tubular steel DECK SYSTEM UltraCut Series 6 5.5"-deep deck Cutting heights from 1" 5.5" Premium, heavy-duty cutter housings Heavy-duty support with side spring and transport auto-lock Single-point, finite height adjustment Patented deck support struts Series 5 6" deep deck Cutting heights from 1" 5" Premium, heavy-duty cutter housings Heavy-duty support with dual side springs and transport lock Full floating rear-discharge cutting deck with heavy duty gear driver Spindle assembly Cutting heights 1" 4" UltraCut Series 3 5" deep deck Cutting heights from 1" 5" UltraCut Series 4 5"-deep deck Cutting heights from 1" 5" PTO 200 ft-lbs 200 ft-lbs 200 ft-lbs 200 ft-lbs 250 ft-lbs 250 ft-lbs 250 ft-lbs 6 brake band 175 ft-lbs 200 ft-lbs SPEED 0-10 mph mph 0-12 mph 0-7 mph 0-8 mph DRIVE SYSTEM Exmark-exclusive Parker unitized pump and wheel motors No hoses Integrated cooling fans 12cc pumps Exmark-exclusive Parker unitized pump and wheel motors No hoses Integrated cooling fans 16cc pumps Dual Hydro-Gear 21cc pumps power 18-cubic-inch wheel motors Dual Hydro-Gear 12cc variable-displacement pumps power Hydro-Gear planetary reduction motors Two Hydro-Gear 10cc pumps powering two Parker 12-cubic-inch motors FUEL CAPACITY 12-gallon Single fill location 15.5-gallon twin fuel tanks 7.5-gallon Pivoting tank 8-gallon Single fill location SEAT Deluxe, two-tone bolstered seat with Elastomeric Vibration Control (EVC) material Innovative Seat Isolation System (SIS) Fore and aft adjustment from operator s position with seat flip-up* Hinge-mounted, deluxe, two-tone, bolstered full-suspension seat with Elastomeric Vibration Control (EVC) material Adjusts to individual operator weight, and features padded, height-adjustable armrests High-back, Elastomeric Vibration Control (EVC) seat DRIVE TIRES 24 x ply Multi-Trac 24 x ply Multi-Trac 26 x ply Multi-Trac 18 x Multi-Trac C/S 18 x Kenda Tires 20 x Kenda Tires FRONT CASTER TIRES 13 x Smooth-tread Semi-pneumatic tires 13 x Smooth-tread Semi-pneumatic tires 13 x Smooth-tread Semi-pneumatic tires 8 x 3-4 Semi-pneumatic 11 x 4-5 Smooth-tread Semi-pneumatic tires 11 x 4-5 Smooth-tread Semi-pneumatic tires INSTRUMENTATION Operational diagnostics Integral fuel gauge and hour meter Mechanical fuel gauge Standard hour meter Translucent visual fuel indicator Standard hour meter MODEL # LZX680KC486 LZX740KC526 LZX740KC606 LZX740KC606CA LZX749EKC606 LZX801KA606 LZX801KA606SS LZX940KC606 LZX980KC606 LZX940KC726 LZX980KC726 LZDS902K605 LZDS902K725 NV640KC NV740KC NV730EKC CD42CD CD48CD VT541KA363CA VT541KA363 VT651KA484 VT691KA484CA VT691KA524 VT691KA524CA VT730EKC524 VT740EVC604 EFI unit *LZX801KA606SS, LZX940KC606, LZX940KC724, LZX980KC606, and LZX980EKC726 have a suspension seat

ECS CONTROLS ECS CONTROLS EASY ON THE HANDS.

hands isn t the first thing you think of when you think

But we couldn t forget about the hands, considering, in this

feet. Our patented Enhanced Control System (ECS) walk-behinds

helps protect them from hitting objects that stick out.

14 ECS CONTROLS ECS CONTROLS EASY ON THE HANDS. ECS CONTROLS Let s face it, the comfort of the operator s hands isn t the first thing you think of when you think walk-behinds. But we couldn t forget about the hands, considering, in this case, they do just as much work as the operator s legs and feet. Our patented Enhanced Control System (ECS) walk-behinds place the handles where your hands naturally fall, which also helps protect them from hitting objects that stick out. The shorter grip distance and drive levers relieve fatigue while the cushioned handles reduce vibration. It s total comfort for hard-working hands

WALK-BEHINDS WALK-BEHINDS EXPECT BIG THINGS FROM THIS COMPACT MOWER.

The Commercial 21 is a heavy-duty, full-feature trim and finish mower.

Its simple design means that it has fewer parts, resulting in reduced maintenance, fewer

Even its height adjustment function is simple, eliminating the need for pivot-style adjusters.

That translates to less time emptying and more time mowing.

to put back on, the bagger eliminates the need for levers and reduces headaches.

HEIGHT ADJUST: The mower s innovative and durable front height adjust means there are no

A B C D FRAME: With 60% fewer parts than anything in its class, you can expect less downtime

15 WALK-BEHINDS WALK-BEHINDS EXPECT BIG THINGS FROM THIS COMPACT MOWER. Don t let its smaller size fool you. The Commercial 21 is a heavy-duty, full-feature trim and finish mower. It s built to last and it delivers Exmark s signature quality cut quickly and efficiently. Its simple design means that it has fewer parts, resulting in reduced maintenance, fewer failures and absolutely no grease points. Even its height adjustment function is simple, eliminating the need for pivot-style adjusters. And as for the bagger, it s easy to take off and put on, doing away with levers and headaches. That translates to less time emptying and more time mowing. MODELS INCLUDE: Commercial 21 S-Series Commercial 21 X-Series BAGGER: Easy to remove and easy to put back on, the bagger eliminates the need for levers and reduces headaches. It allows you to quickly empty it and get back to the job at hand. HEIGHT ADJUST: The mower s innovative and durable front height adjust means there are no pivot-style adjusters to deal with. A B C D FRAME: With 60% fewer parts than anything in its class, you can expect less downtime and a lot more mowing time. And with absolutely no grease points, maintenance becomes less of a concern. n. See pages 52 and 53 for Commercial 21 specs. 28 COMMERCIAL 21 A B C D redesigned handle mount improves ergonomics multipurpose blade allows for cutting flexibility infinitely variable drive speeds for more control automotive-grade polymer wheels for increased reliability 29

WALK-BEHINDS WALK-BEHINDS GOOD NEWS: YOUR SEARCH FOR THE BEST WALK-BEHIND JUST ENDED. Large properties. Small properties. Tight spaces.

Whether you re looking for a large walkbehind with all of the bells and whistles or something a bit more modest, this is the family to turn to.

These machines are built to last, taking on the toughest mowing conditions without breaking a sweat.

ECS: Exmark s patented Enhanced Control System comes standard on many widearea walk-behinds.

It can be easily and quickly changed without the need for a single tool.

16 WALK-BEHINDS WALK-BEHINDS GOOD NEWS: YOUR SEARCH FOR THE BEST WALK-BEHIND JUST ENDED. Large properties. Small properties. Tight spaces. Ornate landscaping. Whether you re looking for a large walkbehind with all of the bells and whistles or something a bit more modest, this is the family to turn to. All Exmark walk-behinds are designed to be incredibly productive, delivering a one-of-a-kind cut with each pass. These machines are built to last, taking on the toughest mowing conditions without breaking a sweat. They ll have you easily maneuvering on hillsides, around flower beds, and anything else that can end up on the lawn. ECS: Exmark s patented Enhanced Control System comes standard on many widearea walk-behinds. It lessens fatigue and provides greater comfort to the operator s hands, arms and back. DRIVE BELT: The drive belt is designed to be hassle-free. It can be easily and quickly changed without the need for a single tool. MODELS INCLUDE: Metro Viking Turf Tracer S-Series A B C D Turf Tracer X-Series EFI units available Propane units available DRIVE TIRES: The drive tires provide unmatched stability and maneuverability, giving you the freedom to move over uneven terrain with incredible ease. See pages 55 to 58 for wide-area walk-behind specs. 30 WIDE-AREA WALK-BEHINDS A B C D ECS lessens fatigue and provides greater comfort drive belt service requires no tools superior clipping dispersal with molded discharge chute smooth-tread semi-pneumatic caster tires reduce repair 31

SPECS SPECS WALK-BEHIND MOWERS MODEL NAME Commercial 21 S-Series Commercial 21 X-Series Metro 26 Metro Viking Turf Tracer S-Series Turf Tracer X-Series Turf Tracer X-Series Decks DECK SIZE 21 21 26

Kawasaki V-Twin Kohler Command EFI Kawasaki V-Twin Propane ENGINE MODEL FJ180V GXV160 FJ180V FJ180V FS481V FS481V FS481V FS481V FS600V FS600V FS541V FS600V CV640 ECV650 FX691V FX691V DECK SYSTEM 0.

17 SPECS SPECS WALK-BEHIND MOWERS MODEL NAME Commercial 21 S-Series Commercial 21 X-Series Metro 26 Metro Viking Turf Tracer S-Series Turf Tracer X-Series Turf Tracer X-Series Decks DECK SIZE ENGINE BRAND Kawasaki KAI Honda GXV Kawasaki KAI Kawasaki KAI Kawasaki V-Twin Kawasaki V-Twin Kawasaki V-Twin Kawasaki V-Twin Propane Kawasaki V-Twin Kohler Command Kawasaki V-Twin Kohler Command EFI Kawasaki V-Twin Propane ENGINE MODEL FJ180V GXV160 FJ180V FJ180V FS481V FS481V FS481V FS481V FS600V FS600V FS541V FS600V CV640 ECV650 FX691V FX691V DECK SYSTEM 0.25"-thick die-cast aluminum 5"-deep Cutting heights 1" 4.5" in 0.5" increments 0.25"-thick die-cast aluminum 5"-deep Cutting height 1" 4.5" in 0.5" increments 0.25"-thick die-cast aluminum Cutting height 1" 4" in 0.5" increments Full-floating, 5"-deep deck Cutting height 1" 4.25" Full-floating, 5"-deep deck Cutting height 1" 4.25" Full-floating, 5"-deep deck Cutting height 1" 4.5" UltraCut Series 4 4"-deep deck Cutting heights from 1.5" 5" Hex-style spindle blade driver Chain support and transport lock SPEED mph mph mph mph mph mph SPEED CONTROL BBC fingertip bail control Standard pistol-grip Available Enhanced Control System (ECS) Enhanced Control Systems (ECS) Enhanced Control System (ECS) Enhanced Control System (ECS) PTO Lever-actuated blade engagement with blade brake Mechanical blade engagement with blade brake Mechanical blade engagement with blade brake Electromagnetic 200 ft-lbs clutch DRIVE SYSTEM Hand-push Self-propelled Rear-wheel gear-driven Self-propelled Rear-wheel gear-driven Single-belt drive Dual-belt drive Dual Hydro-Gear variable-displacement pumps Dual Hydro-Gear variable-displacement pumps Dual Hydro-Gear variable-displacement pumps DRIVE TIRES 9" x 2.5" Semi-pneumatic 9" x 2.5" Semi-pneumatic 10 x 3-7 Semi-pneumatic 13 x ply Turf Saver 13 x ply Turf Master 13 x ply Turf Master 16 x ply Turf Master 18 x ply Turf Master FRONT CASTER TIRES 9 x Smooth-tread Semi-pneumatic 9 x Smooth-tread Semi-pneumatic 9 x Smooth-tread Semi-pneumatic 11 x 4-5 Smooth-tread Semi-pneumatic PARKING BRAKE Standard brake bands Lever-actuated mechanical compression Lever-actuated mechanical compression Lever-actuated mechanical compression MODEL EFI unit Propane unit ECSKAP21 ECSKA21 ECXHN21 ECXHNBBC21 ECXKA21 ECXKABBC21 MSKABBC26 MG481KA322P MG481KA362 MG481KA362P MG481KA362CA MG481KA483P MG481KA483 MG481KA483CA VH481KA362 VH481KA362CA VH481KA483 VH481KA483CA TTS481KA363 TTS481KA363CA TTS481KA483 TTS600KAE483 TTS600PKAE483 TTS541KA523 TTS600KAE523 TTX640KCE TTX650EKCE TTX691KAE TTX691KAECA TTX691PKAE FMD524 FMD

UNIT TYPE COMMERCIAL WARRANTY CONSUMER WARRANTY commercial riders & front-mount Lazer Z DS-Series & Navigator 2 Years, Limited 2 Years, Limited WARRANTY EXCEPTIONS Bags, Belts and Tires Battery

Belts and Tires Battery Engine* 90 Days 1 Year, Prorated 2 Years Kawasaki 2 Years Kohler ** 90 Days 1 Year, Prorated 3 Years Kawasaki 2 Years Kohler** Lazer Z E-Series 2 Years Limited 4 Years or 500

S-Series 2 Years, Limited 4 Years or 500 Hours, Limited WARRANTY EXCEPTIONS Bags, Belts and Tires Battery Engine* 90 Days 1 Year, Prorated 2 Years 90 Days 1 Year, Prorated 3 Years Pioneer E-Series 1

30 Days, Limited 3 Years, Limited WARRANTY EXCEPTIONS Bags, Belts and Tires Battery Engine* walk-behinds 90 Days 1 Year, Prorated 2 Years Commercial Walk-Behinds (excludes 26" & 21") 2 Years 2 Years

Discharge 90 Days 90 Days Quest Attachments and Accessories 30 Days, Limited 1 Year Limited miscellaneous Engine* Peerless 5-Speed Transmission Warranty is covered by engine manufacturer 2 Years

covered by engine manufacturer 2 Years (extended 21 months beyond manufacturer s warranty of 90 days) Battery 1 Year, Prorated 1 Year, Prorated WE VE GOT YOU COVERED OEM PARTS Exmark parts are

18 UNIT TYPE COMMERCIAL WARRANTY CONSUMER WARRANTY commercial riders & front-mount Lazer Z DS-Series & Navigator 2 Years, Limited 2 Years, Limited WARRANTY EXCEPTIONS Bags, Belts and Tires Battery Engine* 90 Days 1 Year, Prorated 2 Years** 90 Days 1 Year, Prorated 2 Years** Lazer Z X-Series, Lazer Z S-Series & Vantage 3 Years, Limited 5 Years or 750 Hours, Limited WARRANTY EXCEPTIONS Bags, Belts and Tires Battery Engine* 90 Days 1 Year, Prorated 2 Years Kawasaki 2 Years Kohler ** 90 Days 1 Year, Prorated 3 Years Kawasaki 2 Years Kohler** Lazer Z E-Series 2 Years Limited 4 Years or 500 Hours, Limited WARRANTY EXCEPTIONS Bags, Belts and Tires Battery Engine* 90 Days 1 Year, Prorated 2 Years Kawasaki 2 Years Kohler 90 Days 1 Year, Prorated 3 Years Kawasaki 2 Years Kohler Pioneer S-Series 2 Years, Limited 4 Years or 500 Hours, Limited WARRANTY EXCEPTIONS Bags, Belts and Tires Battery Engine* 90 Days 1 Year, Prorated 2 Years 90 Days 1 Year, Prorated 3 Years Pioneer E-Series 1 Year, Limited 4 Years or 500 Hours, Limited WARRANTY EXCEPTIONS Bags, Belts and Tires Battery Engine* 90 Days 1 Year, Prorated 2 Years 90 Days 1 Year, Prorated 3 Years Quest E-Series & Quest S-Series 30 Days, Limited 3 Years, Limited WARRANTY EXCEPTIONS Bags, Belts and Tires Battery Engine* walk-behinds 90 Days 1 Year, Prorated 2 Years Commercial Walk-Behinds (excludes 26" & 21") 2 Years 2 Years 26" & 21" Mowers 1 Year 1 Year accessories 90 Days 1 Year, Prorated 3 Years Attachments and Accessories (except as noted below) 1 Year, Limited 1 Year, Limited Striping Roller & Operator-Controlled Discharge 90 Days 90 Days Quest Attachments and Accessories 30 Days, Limited 1 Year Limited miscellaneous Engine* Peerless 5-Speed Transmission Warranty is covered by engine manufacturer 2 Years (extended 21 months beyond manufacturer s warranty of 90 days) Bags, Belts and Tires 90 Days 90 Days (One-time pick-up and delivery allowed) (One-time pick-up and delivery allowed) Warranty is covered by engine manufacturer 2 Years (extended 21 months beyond manufacturer s warranty of 90 days) Battery 1 Year, Prorated 1 Year, Prorated WE VE GOT YOU COVERED OEM PARTS Exmark parts are engineered to work with every other part to deliver the kind of power and performance required to maximize your productivity. So when you need a part for your Exmark zero-turn or walk-behind, go original. EXMARK PARTS PLUS If a dealer does not have in stock the Exmark part you need, we will have it available to you on the next business day, or the part is free! Our Parts Plus program is just another way to ensure that your machine achieves maximum uptime... INDUSTRY-LEADING WARRANTY When you purchase an Exmark zero-turn or walk-behind mowing system, you can buy with confidence, because it s backed by Exmark s industry-leading warranty. See your local Exmark dealer for complete warranty details. Restrictions apply; please contact your Exmark dealer for further details. Dealer participation is optional. Program not available in Hawaii and Canada. * Please refer to the engine manufacturer s warranty statement. We are not authorized to handle warranty adjustments on engines. This warranty only includes the cost of parts and labor. ** Kohler-powered EFI units offer a 3-year commercial warranty. WARRANTY COLLECTION SYSTEMS ULTRAVAC S-SERIES 3-BAGGER ULTRAVAC X-SERIES ULTRAVAC E-SERIES Power and durability in one low-cost package. Commercial-grade, cloth mesh bags with reinforced bottoms. Full 8.0-bushel commercial capacity. 5-blade, 0.25-inch, abrasion-resistant steel impellers provide the power you ll need. Sealed, non-greaseable impeller bearings for longer life. ULTRAVAC X-SERIES Discharges grass quickly with one simple motion of the release lever. UltraVac X-Series commercial-grade steel and polyethylene hopper with rear-discharge door (7 bushels or 11 bushels). See pages 59 to 61 for full specs and fit-up information. ULTRAVAC S-SERIES Quick-attach design enables easy switching from bagging to side-discharge without tools. Larger-diameter, smooth-discharge tube handles volumes of debris with less clogging. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust around engine and operator. Three UltraVac 32-gallon (13.4 bushels) collection bags. Available on select models. Two UltraVac 32-gallon (8 bushels) collection bags. NON-POWERED COLLECTION SYSTEMS Simple, effective design and ease of installation. Larger-diameter, smooth-bore discharge tubes for uninterrupted flow from deck to hopper. Sturdy, large-capacity collection bags. Durable, injection-molded hood. Quick-attach deck boot. Streamlined design enables better trimmability. Low profile to get under obstacles easier. POWER DECK LIFT Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48" 72" cutting deck Lazer Z, its electronic motor features Exmark s signature durability and a low-profile design that leaves plenty of trailer space. (Fits only 2010 model year.) HELLA WORK LAMP KIT Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact and can even take on high-pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement. EQUIPMENT COVER Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It s constructed from tough 600-denier polyester, making it abrasion- and tear-resistant. Its elastic opening provides a secure, snug fit. See dealer for fit-up information. Two sizes: Small ( ) Fits Quest units. Large ( ) Fits all Lazer Z and Pioneer units. Does not fit 72" units. TRASH CONTAINER Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and a durable, easy-to-clean mesh receptacle. See dealer for fit-up information. RIDING MOWERS JACK AND RECEIVER Safely access the underside of your zero-turn mower s deck. Jack attaches for smooth lift without hassle or strain, thanks to the comfortable, ergonomic design. Built for years of reliability. Fits most Lazers, Vantage, Pioneer and Quest. SEAT ISOLATION SYSTEM Reduces operator fatigue with a 3-dimensional, motion-isolation layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits most Lazer Z models. ACCESSORIES 34 35

ACCESSORIES RIDING MOWERS ADDITIONAL RIDING MOWER ACCESSORIES WALK-BEHIND MOWERS ACCESSORIES NAVIGATOR BLADE

It utilizes a ground scraper constructed of carbon steel that is reversible, to double its productivity.

SUN SHADE Easily mounts to Rollover Protection System (ROPS).

Fits all Lazer Z and Pioneer models. Does not fit Quest.

connect and remove attachments. Blower or blade attachments can be utilized from operator controls.

two-stage blower attachment features a high-speed, 4-blade impeller.

COMMERCIAL 21 WHEEL WEIGHT KIT Enhance your productivity in wet conditions.

largerdiameter wheel kit improves your productivity.

suspension system easily mounts to your existing EVC operator seat.

19 ACCESSORIES RIDING MOWERS ADDITIONAL RIDING MOWER ACCESSORIES WALK-BEHIND MOWERS ACCESSORIES NAVIGATOR BLADE Featuring a 48" width, the snow blade can be angled 20 either right or left. It utilizes a ground scraper constructed of carbon steel that is reversible, to double its productivity. Requires Quick-Hitch Attachment System and fits up without tools. FULL-SUSPENSION SEAT Designed to fit all Lazer Z models, this low-profile, full-suspension seat enhances operator comfort and lumbar support by adjusting to individual weight and preferred seat-back angle. SUN SHADE Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water-repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. Does not fit Quest... NAVIGATOR QUICK-HITCH ATTACHMENT SYSTEM This hitch system replaces the mowing deck and makes it easy to connect and remove attachments. Blower or blade attachments can be utilized from operator controls. NAVIGATOR SNOW BLOWER 48" in width and constructed of lasting 12- and 16-gauge steel, this heavy-duty, two-stage blower attachment features a high-speed, 4-blade impeller. Blower controls and rotational chute are easily maneuvered from the operator s seat. Requires Quick-Hitch Attachment System and fits up without tools. COMMERCIAL 21 WHEEL WEIGHT KIT Enhance your productivity in wet conditions. Each wheel plate weighs 3 pounds to give you excellent performance, even with a full load of grass. COMMERCIAL "-DIAMETER WHEELS For extended cut height, tough terrain or when reduced rolling resistance is needed, this largerdiameter wheel kit improves your productivity. CUSTOMRIDE SYSTEM A great value in comparison to more expensive full-suspension seats, our CustomRide suspension system easily mounts to your existing EVC operator seat. System features enable operator to customize suspension settings to their individual weight and personal preference. Fits all Lazer Z models. COMMERCIAL 21 DECK WEAR KIT Prolong the life of your deck in the toughest conditions with this heavy-duty deck wear kit. NAVIGATOR DUMP TUBS Debris can be quickly and conveniently managed with our two polyethylene tub inserts. These removable tubs enable the weight of a full, 9.5-bushel hopper to be split and unloaded one tub at a time. 12-VOLT POWER ADAPTER Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.) 3-BUSHEL BAGGER Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Vantage and all wide-area walk-behinds. EXMARK STANDON Increase productivity while reducing workload with this pull-behind sulky. Uses an innovative QuikMount system, and convenient, spring-loaded latch. Expanded operator deck with foot guard for safer, more comfortable riding

ACCESSORIES WALK-BEHIND MOWERS ALL MOWERS ACCESSORIES COMMERCIAL 21 ENGINE GUARD Protect your engine from impact when mowing

OPERATOR-CONTROLLED DISCHARGE The infinitely adjustable blocker door opens and closes, allowing user to quickly control

COMMERCIAL 21 MULCH PLUG Easily transition from bagging to mulching.

Delivers superior anti-wear protection and twice the shear stability of competing oils.

The 1-gallon gas tank fits easily onto your engine to provide optimum productivity. Available for ECSKAP21 and ECSKA21 models.

Easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

EXMARK PREMIUM ENGINE OIL Using a synthetic formulation that is far more stable and robust than inexpensive oil from your local

WALK-BEHIND WEIGHT SET Add weight to the front end of your Exmark walkbehind.

20 ACCESSORIES WALK-BEHIND MOWERS ALL MOWERS ACCESSORIES COMMERCIAL 21 ENGINE GUARD Protect your engine from impact when mowing around low-hanging branches and other obstacles. OPERATOR-CONTROLLED DISCHARGE The infinitely adjustable blocker door opens and closes, allowing user to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools. COMMERCIAL 21 MULCH PLUG Easily transition from bagging to mulching. EXMARK PREMIUM HYDRO OIL Designed for today s more demanding hydraulic systems to enhance control performance. Delivers superior anti-wear protection and twice the shear stability of competing oils. COMMERCIAL 21 GAS TANK Maximize your mowing with increased fuel capacity. The 1-gallon gas tank fits easily onto your engine to provide optimum productivity. Available for ECSKAP21 and ECSKA21 models. EXMARK TURF STRIPER Allows you to mow and stripe at the same time. Installs quickly, using existing mounting points. Easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs. METRO 26 SIDE-DISCHARGE CHUTE Quickly change from rear-bagging to side-discharge. EXMARK PREMIUM ENGINE OIL Using a synthetic formulation that is far more stable and robust than inexpensive oil from your local auto parts store or big retail outlet, Exmark premium is the right choice for your mower. WALK-BEHIND WEIGHT SET Add weight to the front end of your Exmark walkbehind. Enhance stability and control when using Exmark StandOn. Comes in pairs. Each weighs 9.5 pounds. Excludes Turf Tracer X-Series. METRO 26 MULCH KIT Easily transition from bagging to mulching. HYDRO MAINTENANCE KIT Kit includes: 4 bottles Exmark Premium hydraulic oil 1 belt 2 hydro filters MICRO-MULCH SYSTEM The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping

PRODUCTIVITY REDUCED COST OF OWNERSHIP Owning an Exmark increases your profits through: PRODUCTIVITY Maximized productivity per employee. PRODUCTIVITY AND INCREDIBLE VALUE COME STANDARD.

EXAMPLE: 20% more acres per hour (from 5 6 mph) @ $40.00 per hour = $8.00 per hour. 180 working days per year x 5 hours per day = 900 hours x $8.00. = $7,20 0 per year. 20% revenue increase per hour.

Exmark mowers are engineered to start working and stay working, reducing downtime and overall operating expense, which makes them more valuable than their sticker price.

As a matter of fact, with Exmark mowers high performance and low maintenance, you ll be saving time and money in the long run.

1.5 0.52 0.41 0.64 0.51 0.73 0.58 0.79 0.63 0.91 0.73 1.00 0.80 1.09 0.88 2.0 0.69 0.55 0.85 0.68 0.97 0.78 1.05 0.84 1.21 0.97 1.33 1.06 1.45 1.16 2.5 0.86 0.69 1.06 0.85 1.21 0.97 1.31 1.05 1.52 1.

21 PRODUCTIVITY REDUCED COST OF OWNERSHIP Owning an Exmark increases your profits through: PRODUCTIVITY Maximized productivity per employee. PRODUCTIVITY AND INCREDIBLE VALUE COME STANDARD. Minimized downtime losses. Reduced in-house shop costs. Decreased repair costs. Increased focus on customer sales and marketing. Better retention of strong employees. Higher resale value. EXAMPLE: 20% more acres per hour (from 5 6 $40.00 per hour = $8.00 per hour. 180 working days per year x 5 hours per day = 900 hours x $8.00. = $7,20 0 per year. 20% revenue increase per hour. COST OF OWNERSHIP AND PRODUCTIVITY They re tough. They re reliable. They re efficient. They re low-maintenance. It s exactly what you want in your mowers. Exmark mowers are engineered to start working and stay working, reducing downtime and overall operating expense, which makes them more valuable than their sticker price. And with each passing year, their value gets even higher. As a landscape professional, the investment you make in original doesn t impact your bottom line as much as other operational costs. As a matter of fact, with Exmark mowers high performance and low maintenance, you ll be saving time and money in the long run. MPH RIDER ACRES-PER-HOUR PRODUCTIVITY Efficiency at 100% and 80%* 34" Width 42" Width 48" Width 52" Width 60" Width 66" Width 72" Width 100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80% LABOR 50% FUEL 9% EQUIPMENT 16% MAINTENANCE 15% DOWNTIME 10% % of a landscape professional s mowing costs comprise labor, downtime and maintenance * Two productivity ratings are shown: one at 100% and one at 80% efficiency. Many manufacturers use 100% efficiency ratings for sales purposes. Exmark believes an 80% efficiency rating is more representative of actual mowing conditions as it allows for turns and overlapping. Formulas for calculating acres per hour: 100% efficiency MPH x width of cut 99 = acres per hour 80% efficiency MPH x width of cut 124 = acres per hour 40 41

22 RIDERS RIDERS RIDING MOWER SPECIFICATIONS QUEST E-SERIES Model Blades Weight Width (deflector down) Length Height QTE651KA421 2 Blades at 21.60" 551 lbs in. (136.7 cm) 71.8 in. (182.4 cm) 40.7 in. (103.4 cm) RIDING MOWER SPECIFICATIONS QUEST S-SERIES Model Blades Weight Width (deflector down) Length Height QTS691KA502 3 Blades at 17.50" 681 lbs in. (159.3 cm) 71.8 in. (182.4 cm) 42.9 in. (109.0 cm) QTE691KA501 3 Blades at 17.50" 623 lbs. 63 in. (160.0 cm) 72.9 in. (185.2 cm) 42.9 in. (109.0 cm) STYLE Exmark Series-1 stamped steel deck. Side-discharge standard with the option to bag or mulch. WIDTHS AVAILABLE 42", 50". CUTTING HEIGHTS 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. BLADE-TIP SPEED Approximately 18,500 fpm. TRACTOR FRAME Unibody, riveted 10-ga. steel. STEERING & MOTION CONTROL Hydraulically dampened twin levers adjust fore and aft. FRONT CASTER TIRES 350/410 x 4 smooth-tread, pneumatic (42" model), 13 x 5 ribbed tread, pneumatic (50" model). DRIVE TIRES 18 x , 4-ply Turf Tech TL (42" model), 18 x , 4-ply Turf Tech TL (50" model). TURNING RADIUS True zero-turn. PARKING BRAKE Lever-actuated brake system. Integral to transaxles. SEAT High-back foam-padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft 3 in, by loosening 2 bolts and sliding seat (42" model). Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged mounting, spring suspension, fore and aft adjustment from operator's position (50" model). ENGINES AVAILABLE Kawasaki V-Twin FR651V, FR691V DRIVE SYSTEM Two Hydro-Gear ZT2100 hydrostatic transaxles (42" model). Two Hydro-Gear ZT2200 (50" model). SPEED 0 7 mph (11.3 kph) forward, mph (5.5 kph) reverse. PTO ENGAGEMENT MagStop electromagnetic 80-ft-lbs clutch (42" model). MagStop electromagnetic 125-ft-lbs clutch (50" model). FUEL CAPACITY 2.9 gallons. STYLE Exmark Series-2 fabricated and welded steel deck. Side-discharge standard with the option to bag or mulch. WIDTHS AVAILABLE 50". CUTTING HEIGHTS 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard foot-operated assist. BLADE-TIP SPEED Approximately 18,500 fpm. TRACTOR FRAME Unibody, riveted 10-ga. steel. STEERING & MOTION CONTROL Hydraulically dampened twin levers adjust fore and aft. FRONT CASTER TIRES 13 x 5 ribbed tread, pneumatic. DRIVE TIRES 20 x , 4-ply Turf Master. TURNING RADIUS True zero-turn. PARKING BRAKE Lever-actuated brake system. Integral to transaxles. SEAT Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged mounting, spring suspension, fore and aft adjustment from operator's position. ENGINES AVAILABLE Kawasaki V-Twin FR691V. DRIVE SYSTEM Two Hydro-Gear ZT2800 hydrostatic transmissions with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components. SPEED 0 7 mph (11.3 kph) forward, mph (5.5 kph) reverse. PTO ENGAGEMENT MagStop electromagnetic 125-ft-lbs clutch. FUEL CAPACITY 2.9 gallons

23 RIDERS RIDERS RIDING MOWER SPECIFICATIONS PIONEER E-SERIES Model Blades Weight Width (deflector down) Length Height PNE651KA482 3 Blades at 16.25" 799 lbs. 60 in. (152 cm) 78 in. (198 cm) 71 in. (180 cm) PNE691KA522 3 Blades at 18.00" 805 lbs. 64 in. (163 cm) 78 in. (198 cm) 71 in. (180 cm) RIDING MOWER SPECIFICATIONS PIONEER S-SERIES Model Blades Weight Width (deflector down) Length Height PNS600KA443 2 Blades at 22.25" 822 lbs. 58 in. (147 cm) 79 in. (201 cm) 72 in. (183 cm) PNS651KA483 3 Blades at 16.25" 862 lbs. 60 in. (152 cm) 78 in. (198 cm) 72 in. (183 cm) STYLE UltraCut Series 2. Side discharge standard with the option to bag or mulch. WIDTHS AVAILABLE 48", 52". CUTTING HEIGHTS 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments. BLADE-TIP SPEED Approximately 18,500 fpm. TRACTOR FRAME Unibody, welded, heavy-duty 2" square tubular steel. STEERING & MOTION CONTROL Hydraulically dampened twin levers, adjustable both fore and aft, and to 2 height positions. FRONT CASTER TIRES 3 x 5.0-6, smooth-tread, pneumatic. DRIVE TIRES 20 x Turf Master. TURNING RADIUS True zero-turn. PARKING BRAKE Lever-actuated pawl brake. SEAT Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged mounting, spring suspension. Fore and aft adjustment from operator's position. ENGINES AVAILABLE Kawasaki V-Twin FR651V FR691V. DRIVE SYSTEM Two Hydro-Gear ZT2800 hydrostatic transmissions with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components. SPEED mph (11.3 kph) forward, mph (6.4 kph) reverse. PTO ENGAGEMENT MagStop electromagnetic 125-ft-lbs clutch. FUEL CAPACITY 7-gallon (26.5L) single fuel tank with single fill location. PNS680KC523 3 Blades at 18.00" 873 lbs. 65 in. (165 cm) 78 in. (198 cm) 72 in. (183 cm) PNS740KC604 3 Blades at 20.50" 948 lbs. 73 in. (185 cm) 79 in. (200 cm) 72 in. (183 cm) STYLE UltraCut Series 3. Side-discharge standard with the option to bag or mulch. WIDTHS AVAILABLE 44", 48", 52", 60". CUTTING HEIGHTS 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments. BLADE-TIP SPEED Approximately 18,500 fpm. TRACTOR FRAME Unibody, welded, heavy-duty 2" square tubular steel. STEERING & MOTION CONTROL Hydraulically dampened twin levers, adjustable both fore and aft, and to 2 height positions. FRONT CASTER TIRES 13 x 5.0-6, smooth-tread, pneumatic. DRIVE TIRES 22 x Kenda tires (23 x Kenda tires on PNS740KC604). TURNING RADIUS True zero-turn. PARKING BRAKE Lever-actuated pawl brake. SEAT Commercial-grade, high-back, contoured and foam-padded with armrests. Hinged mounting, spring suspension. Fore and aft adjustment from operator's position. ENGINES AVAILABLE Kawasaki V-Twin FX600V, FX651V, Kohler Command CV680, CV740. DRIVE SYSTEM Two Hydro-Gear ZT3100 (ZT3400 on PNS740KC604) hydrostatic transmissions with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavyduty components. SPEED mph (11.3 kph) forward, mph (6.4 kph) reverse. (0 9.0 mph (14.5 kph) forward, mph (9.7 kph) reverse on PNS740KC604. PTO ENGAGEMENT MagStop electromagnetic 175-ft-lbs clutch. FUEL CAPACITY 7-gallon (26.5L) single fuel tank with single fill location

24 RIDERS RIDERS RIDING MOWER SPECIFICATIONS CUTTING PERFORMANCE Side discharge with option to bag or mulch. BLADES 0.20"-thick (5.1 mm) alloy steel. BLADE SPINDLES 1.75" (44.5 mm)-diameter splined blade driver. HYDRO FLUID Exmark Premium Hydro Oil. ELECTRICAL SYSTEM 12-V battery. ENGINE HOURMETER Standard. DRIVE-WHEEL RELEASE Allows unit movement without engine running. SAFETY PACKAGE Operator Presence Controls (OPC). ROLLOVER PROTECTION SYSTEM (ROPS) 2-post foldable ROPS standard with seat belt and latch. CUP HOLDER Standard. DECK LIFT Standard. CASTERS 0.50"-thick, double-yoke, smooth-tread caster wheel assembly with pre-installed bearing cups. RIDING MOWER SPECIFICATIONS LAZER Z S-SERIES Model Blades Weight Width (deflector down) Length Height LZS651KA484 3 Blades at 16.25" in. (151.4 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm) LZS651KA484CA 3 Blades at 16.25" 1089 lbs in. (151.4 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm) LZS680KC524 3 Blades at 18.00" 1088 lbs in. (164.6 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm) LZS740KC524 3 Blades at 18.00" 1088 lbs in. (164.6 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm) LZS691KA524CA 3 Blades at 18.00" 1088 lbs in. (164.6 cm) 79.2 in. (201.2 cm) 70 in. (177.8 cm) LAZER Z E-SERIES Model Blades Weight Width (deflector down) Length Height LZE600KA484 3 Blades at 16.25" 1035 lbs in. (151.4 cm) 79.2 in. (201.2 cm) 69.5 in. (176.5 cm) LZE691KA524 3 Blades at 18.00" 1070 lbs in. (164.6 cm) 79.2 in. (201.2 cm) 69.5 in. (176.5 cm) LZE740KC604 3 Blades at 20.50" 1105 lbs in. (184.9 cm) 83.1 in. (211.1 cm) 69.5 in. (176.5 cm) LZS730EKC604 3 Blades at 20.50" 1133 lbs in. (184.9 cm) 83.1 in. (211.1 cm) 70 in. (177.8 cm) LZS740KC604 3 Blades at 20.50" 1133 lbs in. (184.9 cm) 83.1 in. (211.1 cm) 70 in. (177.8 cm) LZS740KC604CA 3 Blades at 20.50" 1133 lbs in. (184.9 cm) 83.1 in. (211.1 cm) 70 in. (177.8 cm) LZS801PKA604 3 Blades at 20.50" 1316 lbs in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm) LZS749EKC724 3 Blades at 24.50" 1208 lbs in. (215.6 cm) 86.1 in. (218.7 cm) 70 in. (177.8 cm) LZS801KA724 3 Blades at 24.50" 1208 lbs in. (215.6 cm) 86.1 in. (218.7 cm) 70 in. (177.8 cm) LZS801PKA724 3 Blades at 18.00" 1403 lbs in. (215.6 cm) 86.1 in. (218.7 cm) 70.5 in. (179.1 cm) STYLE Full-floating UltraCut Series 4. Side-discharge standard with the option to bag or mulch. WIDTHS AVAILABLE 48", 52", 60". 10-gauge top that is formed and continuously seamwelded. 7-gauge side skirt with wide-flange cutter housings. CUTTING HEIGHTS " in 0.25" increments, adjustable from the operator s seat. BLADE-TIP SPEED Approximately 18,500 fpm. TRACTOR FRAME Unibody, welded, heavy-duty 1.5" x 3" tubular steel. STEERING & MOTION CONTROL Hydraulically damped twin levers adjust fore and aft. Adjustable dampers (3 positions) to customize drive responsiveness. Levers are also adjustable to 2 height positions. FRONT CASTER TIRES 12 x 5.0-6, smooth-tread, pneumatic. (13 x 5.0-6, smooth-tread, pneumatic on LZE740KC604). DRIVE TIRES 22 x Turf Master. (23 x Turf Master on LZE740KC604.) TURNING RADIUS True zero-turn. PARKING BRAKE Lever-actuated disc brake. SEAT High back with adjustment fore and aft. DIAGNOSTICS Operational diagnostics with integral fuel gauge. ENGINES AVAILABLE Kawasaki V-Twin - FX600V, FX691V, Kohler Command CV740. DRIVE SYSTEM Two Exmark-exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12cc pumps and 14.5-cubic-inch motors. SPEED Infinitely variable speed selection from 0 8 mph forward, 0 6 mph reverse. PTO ENGAGEMENT MagStop electromagnetic 175 ft-lbs clutch with spot brake. (200 ft-lbs on LZE740KC604). FUEL CAPACITY 8-gallon, single fuel tank with single fill location. STYLE Full-floating UltraCut Series 4. Side-discharge standard with the option to bag or mulch. WIDTHS AVAILABLE 48", 52", 60", 72". 10-gauge top that is formed and continuously seamwelded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. 4-point suspension, full-floating deck, 4 adjustable antiscalp rollers. CUTTING HEIGHTS " in 0.25" increments, adjustable from the operator s seat. BLADE-TIP SPEED Approximately 18,500 fpm. TRACTOR FRAME Unibody, welded, heavy-duty 1.5" x 3" tubular steel. STEERING & MOTION CONTROL Hydraulically damped twin levers adjust fore and aft. Adjustable dampers (3 positions) to customize drive responsiveness. Levers are also adjustable to 2 height positions. FRONT CASTER TIRES 13 x 5.0-6, smooth tread, pneumatic, on 48" and 52" units (and LZS801PKA604, LZS801PK724, LZS730EKC604). 13 x 6.5-6, smooth-tread, pneumatic, on 60" and 72" units (except LZS801PKA604, LZS730EKC604 and LZS801PKA724). DRIVE TIRES 23 x Turf Master on 48" and 52" units. 24 x Turf Master on 60" and 72" units. TURNING RADIUS True zero-turn. PARKING BRAKE Lever-actuated disc brake. SEAT Deluxe, two-tone, bolstered seat with Elastomeric Vibration Control (EVC) material. DIAGNOSTICS Operational diagnostics with integral fuel gauge. ENGINES AVAILABLE Kohler Command CV680, CV740; Kawasaki V-Twin FX651V, FX801V, FX691V; Kohler Electronic Fuel Injection ECV730, ECV749. DRIVE SYSTEM Two Exmark-exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12cc pumps and 14.5-cubic-inch motors. Integrated shock valves on 60" and 72" units. SPEED Infinitely variable speed selection from 0 10 mph forward, 0 6 mph reverse. PTO ENGAGEMENT MagStop electromagnetic 200-ft-lbs clutch with spot brake. FUEL CAPACITY High-capacity, 12-gallon, single fuel tank with single fill location (except LZS730EKC604). 8-gallon, single fuel tank with single fill location on LZS730EKC gallon (43.5 lbs) propane tank on LZS801PKA

25 RIDERS RIDERS RIDING MOWER SPECIFICATIONS LAZER Z X-SERIES Model Blades Weight Width (deflector down) Length Height LZX680KC486 3 Blades at 16.25" 1125 lbs in. (151.4 cm) 79.2 in. (201.2 cm) 70.5 in. (179.1 cm) LZX740KC526 3 Blades at 18.00" 1116 lbs in. (164.6 cm) 79.2 in. (201.2 cm) 70.5 in. (179.1 cm) RIDING MOWER SPECIFICATIONS LAZER Z DS-SERIES Model Blades Weight Width (deflector down) Length Height LZDS902K605 3 Blades at 20.75" 1602 lbs in. (184.9 cm) 84.5 in. (214.6 cm) 72.7 in. (184.7 cm) LZDS902K725 3 Blades at 24.75" 1702 lbs in. (217.9 cm) 88.7 in. (225.3 cm) 72.7 in. (184.7 cm) LZX740KC606 3 Blades at 20.50" 1195 lbs in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm) LZX740KC606CA 3 Blades at 20.50" 1200 lbs in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm) LZX749EKC606 3 Blades at 20.50" 1212 lbs in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm) LZX801KA606 3 Blades at 20.50" 1212 lbs in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm) LZX801KA606SS 3 Blades at 20.50" 1212 lbs in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm) LZX940KC606 3 Blades at 20.50" 1260 lbs in. (184.9 cm) 83.1 in. (211.1 cm) 70.5 in. (179.1 cm) LZX940KC726 3 Blades at 24.50" 1292 lbs in. (215.6 cm) 86.1 in. (218.7 cm) 70.5 in. (179.1 cm) LZX980KC726 3 Blades at 24.50" 1276 lbs in. (215.6 cm) 86.1 in. (218.7 cm) 70.5 in. (179.1 cm) STYLE Full-floating UltraCut Series 6 with heavy-duty spindle. Side-discharge standard with the option to bag or mulch. WIDTHS AVAILABLE 48", 52", 60", 72". 10-gauge top that is formed and continuously seamwelded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. CUTTING HEIGHTS " in 0.25" increments adjustable from the operator's seat. BLADE-TIP SPEED Approximately 18,500 fpm. TRACTOR FRAME Unibody, welded, heavy-duty 1.5" x 3" tubular steel. STEERING & MOTION CONTROL Hydraulically damped twin levers adjust fore and aft. Adjustable dampers (3 positions) to customize drive responsiveness. Levers are also adjustable to 2 height positions. FRONT CASTER TIRES 13 x 5.0-6, smooth-tread, semi-pneumatic tires (48" and 52" models); 13 x 6.5-6, smooth-tread, semi-pneumatic tires (60" and 72" models). DRIVE TIRES 24 x , 4-ply Multi-Trac (48" and 52" models); 24 x , 4-ply Multi-Trac (60" and 72" models). TURNING RADIUS True zero-turn. PARKING BRAKE Lever-actuated disc brake. SEAT Deluxe, two-tone, bolstered seat with Elastomeric Vibration Control (EVC) material. Innovative Seat Isolation System (SIS) that provides operator isolation in all three planes of motion Fore and aft adjustment from operator's position with seat flip-up. Suspension seat standard on LZX801KA606SS, LZX940KC606, LZX940KC726, LXZ980KC606 and LZX980KC726. DIAGNOSTICS Operational diagnostics with integral fuel gauge. ENGINES AVAILABLE Kawasaki V-Twin FX801V, Kohler Command V-Twin CV680, CV740, CV940, CV980, Kohler Electronic Fuel Injection - ECV749. DRIVE SYSTEM Two Exmark-exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12cc pumps and 14.5-cubic-inch motors (48" and 52" models). 16cc pumps and 17.1-cubic-inch motors with integrated shock valve (60" and 72"). SPEED Infinitely variable speed selection from mph forward, mph reverse (48" and 52" models); mph forward, 0 7 mph reverse (60" and 72" models). PTO ENGAGEMENT 200-ft-lbs on all models with engines up to FX801V up to 250-ft-lbs on all models with CV940 and CV980. FUEL CAPACITY - High-capacity, 12-gallon, single fuel tank with single fill location. STYLE Series 5 high-capacity cutting platform. Side-discharge standard with option to bag or mulch. WIDTHS AVAILABLE 60" and 72". 10-gauge top that is formed and continuously seam-welded, with 10-gauge top reinforcement plate, 7-gauge side skirt and 7-gauge reinforcement rings at spindle assembly. 6" deep, 4-point suspension, full-floating platform with 6 adjustable coneshaped anti-scalp rollers. CUTTING HEIGHTS 1.0" (2.5 cm) to 5" (12.7 cm) in 0.25" (0.64 cm) increments and adjustable from operator's seat. TRACTOR FRAME Welded, heavy-duty tubular steel. STEERING & MOTION CONTROL Hydraulically dampened twin levers adjust fore and aft. Levers are also adjustable to 2 height positions. FRONT CASTER TIRES 13 x , smooth-tread, semi-pneumatic tires. DRIVE TIRES 26 x 12-12, 4-ply MultiTrac. TURNING RADIUS True zero-turn. PARKING BRAKE Lever-actuated drum and band integrated with transmission-neutral interlock. SEAT Hinge-mounted, deluxe, two-tone, bolstered, full-suspension seat with Elastomeric Vibration Control (EVC) material. Adjusts to individual operator weight and features padded, height-adjustable armrests. ENGINES AVAILABLE Kubota 3-cylinder liquid-cooled diesel D902. DRIVE SYSTEM Two Hydro-Gear 21cc pumps with integral SCR (System Check Relief) valves (in forward), powering two 18-cubic-inch wheel motors with 1.25" (3.18 cm)-diameter tapered shafts. SPEED Infinitely variable speed selection from 0 12 mph (19.3 kph) forward, mph (12.9 kph) reverse. PTO ENGAGEMENT MagStop electromagnetic 250-ft-lbs clutch with spot brake. FUEL CAPACITY 15.5-gal. (58.7-L) twin fuel tanks

26 RIDERS RIDERS RIDING MOWER SPECIFICATIONS NAVIGATOR Model Blades Weight Width (deflector down) Length Height NV640KC 845 lbs in. (108.2 cm) 67.3 in. (170.9 cm) 51.2 in. (130.0 cm) NV730EKC 850 lbs in. (108.2 cm) 67.3 in. (170.9 cm) 51.2 in. (130.0 cm) NV740KC 850 lbs in. (108.2 cm) 67.3 in. (170.9 cm) 51.2 in. (130.0 cm) CD42CD 2 Blades at 22" 325 lbs in. (109.7 cm) 37.2 in. (94.5 cm) 13.1 in. (33.3 cm) CD48CD 2 Blades at 25" 295 lbs in. (125.0 cm) 39.9 in. (101.3 cm) 13.1 in. (33.3 cm) RIDING MOWER SPECIFICATIONS CUTTING PERFORMANCE Side-discharge with option to bag or mulch. BLADES 0.20"-thick (5.1 mm) alloy steel. BLADE SPINDLES 1.75" (44.5 mm)-diameter splined blade driver. HYDRO FLUID Exmark Premium Hydro Oil. ELECTRICAL SYSTEM 12-V battery. ENGINE HOURMETER Standard. VANTAGE DRIVE-WHEEL RELEASE Allows unit movement without engine running. SAFETY PACKAGE Operator Presence Controls (OPC). DECK LIFT Standard. STYLE Full-floating rear-discharge cutting deck with heavy-duty gear-driven spindle assembly. Patented fill reduction baffles standard. WIDTHS AVAILABLE 42" and 48". 7-gauge sides joined by a continuous bead weld to a 10-gauge top, " wear guard is welded to entire base of deck. 7-gauge deck spindle supports. 0.25" thick strap-iron deck supports. CUTTING HEIGHTS 1.0" (2.5 cm) to 4" (10.2 cm). TRACTOR FRAME Channeled and fully welded 1.5" x 1.5" x " wall tubing with ground clearance of 4.0", strategically located, continuous-force counterweight springs. STEERING & MOTION CONTROL FeatherTouch hand-control drive levers. Low-force constant-speed lever. FRONT CASTER TIRES 8.0 x 3-4 semi-pneumatic. DRIVE TIRES 18 x MultiTrac C/S. TURNING RADIUS True zero-turn. ENGINES AVAILABLE Kohler Command CV640, ECV730, CV740. DRIVE SYSTEM Dual Hydro-Gear PJ 12cc variable-displacement pumps power in-wheel planetary gear reduction motors. SPEED Infinitely variable speed selection from 0 7 mph (11.3 kph) forward, mph (8.9 kph) reverse. FUEL CAPACITY 7.5-gallon pivoting tank for easier engine service. Model Blades Weight Width (deflector down) Length (platform up) Height Length (platform down) VT541KA363 2 Blades at 18" 790 lbs in. (121.9 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm) VT541KA363CA 2 Blades at 18" 790 lbs in. (121.9 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm) VT651KA484 3 Blades at 16.25" 855 lbs in. (151.4 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm) VT691KA484CA 3 Blades at 16.25" 855 lbs in. (151.4 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm) VT691KA524 3 Blades at 18" 866 lbs in. (164.6 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm) VT691KA524CA 3 Blades at 18" 866 lbs in. (164.6 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm) VT730EKC524 3 Blades at 18" 875 lbs in. (164.6 cm) 60.5 in. (154 cm) 50 in. (127 cm) 74 in. (188 cm) VT740EKC604 3 Blades at 20.50" 883 lbs in. (184.9 cm) 62.5 in. (159 cm) 50 in. (127 cm) 76 in. (193 cm) STYLE UltraCut Series 4. Side-discharge standard with the option to bag or mulch. (Series 3 on VT541KA363 and VT541KA363CA.) WIDTHS AVAILABLE 36", 48", 52", 60". 10-gauge top that is formed and continuously seamwelded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. 4-point suspension with mechanical spring deck lift. CUTTING HEIGHTS " in 0.25" increments adjustable from the operator's position. BLADE-TIP SPEED Approximately 18,500 fpm. TRACTOR FRAME Welded, heavy-duty 1.5" x 3" tubular steel. SUSPENSION PLATFORM Self-compensating elastomer suspension. Stowable operator platform. STEERING & MOTION CONTROL Twin levers with no-tools adjustable front reference bar to modify forward ground speed. FRONT CASTER TIRES 11 x 4-5, smooth-tread, semi-pneumatic tires. DRIVE TIRES 20 x 10-8 Turf Master drive tires. (18 x Kenda Tires on VT541KA363 and T541KA363CA). TURNING RADIUS True zero-turn. PARKING BRAKE Lever-actuated bar brake. ENGINES AVAILABLE Kawasaki V-Twin FS541V, FS651V, FS691V, and Kohler Electronic Fuel Injection ECV730, ECV740. DRIVE SYSTEM Two Hydro-Gear 10cc pumps powering two Parker 12-cubic-inch motors. SPEED Infinitely variable speed selection from 0 8 mph forward, 0 4 mph reverse. PTO ENGAGEMENT 175-ft-lbs clutch (200-ft-lbs clutch on 60" model). FUEL CAPACITY 8-gallon, single fuel tank with single fill location

27 WALK-BEHINDS WALK-BEHIND MOWER SPECIFICATIONS WALK-BEHIND MOWER SPECIFICATIONS WALK-BEHINDS COMMERCIAL 21 S-SERIES COMMERCIAL 21 X-SERIES Model Blades Weight Width (deflector down) Length Height Model Blades Weight Width (deflector down) Length Height ECSKAP21 1 Blade at 20.5" 107 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm) ECXKA21 1 Blade at 20.5" 114 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm) ECSKA21 1 Blade at 20.5" 112 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm) ECXHN21 1 Blade at 20.5" 112 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm) ECXHNBBC21 1 Blade at 20.5" 117 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm) STYLE Side-discharge bagger and mulch plug standard, with option to rear-discharge. WIDTHS AVAILABLE 21" (53.3 cm). CUTTING HEIGHTS 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3cm) increments. BLADES 0.135"-thick (3.4 cm) alloy steel. BLADE-TIP SPEED Approximately 18,500 fpm. ENGINE DECK 5"-deep, 0.25"-thick die-cast aluminum. DRIVE TIRES 9" x 2.5", semi-pneumatic. BAG CAPACITY 2.5 bushels (20 gallons). SAFETY PACKAGE Zone start. ENGINES AVAILABLE Kawasaki FJ180V KAI (180cc). DRIVE SYSTEM Rear-wheel gear-driven. (ECSKAP21 Push only.) TRANSMISSION Infinitely variable speed selection. SPEED CONTROL Fingertip control. SPEED 0.0 mph to 4.2 mph (6.6 kph) forward. FUEL CAPACITY 2-quart integral fuel tank. ECXKABBC21 1 Blade at 20.5" 115 lbs. 22 in. (55.9 cm) 62 in. (157.5 cm) 38 in. (96.5 cm) STYLE Side-discharge bagger and mulch plug standard, with option to rear-discharge. WIDTHS AVAILABLE 21" (53.3 cm). CUTTING HEIGHTS 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. BLADES 0.135"-thick (3.4 cm) alloy steel. BLADE-TIP SPEED Approximately 18,500 fpm. ENGINE DECK 5"-deep, 0.25"-thick die-cast aluminum. DRIVE TIRES 9" x 2.5", semi-pneumatic. BAG CAPACITY 2.5 bushels (20 gallons). SAFETY PACKAGE Zone start. ENGINES AVAILABLE Kawasaki FJ180V KAI (180cc) or Honda GXV (160cc). All models CARB-compliant. DRIVE SYSTEM Rear-wheel gear-driven. TRANSMISSION Infinitely variable speed selection. SPEED CONTROL Fingertip control. SPEED 0.0 mph to 4.2 mph (6.6 kph) forward. FUEL CAPACITY 1-gallon integral fuel tank

28 WALK-BEHINDS WALK-BEHIND MOWER SPECIFICATIONS WALK-BEHIND MOWER SPECIFICATIONS WALK-BEHINDS METRO 26 METRO Model Blades Weight Width (deflector down) Length Height Model Blades Weight Width (deflector down) Length Height MSKABBC26 1 Blade at 26.10" 151 lbs in. (68.6 cm) 69.0 in. (175.3 cm) 44.0 in. (111.8 cm) MG481KA322P 2 Blades at 16.25" 421 lbs in. (110.0 cm) 73.0 in. (185.4 cm) 43.0 in. (109.2 cm) MG481KA362P 2 Blades at 18.00" 451 lbs in. (119.4 cm) 73.0 in. (185.4 cm) 43.0 in. (109.2 cm) STYLE Rear-discharge bagger standard with option to side-discharge or mulch. WIDTHS AVAILABLE 26" (66 cm). CUTTING HEIGHTS 1.0" (2.5 cm) to 4.0" (10.2 cm) in 0.5" (1.3 cm) increments. BLADE-TIP SPEED Approximately 18,500 fpm. BLADES " (3.96 mm) thick alloy steel. BLADE SPINDLES 1.0" (25.4 mm)-diameter, hardened steel. ENGINE DECK Die-cast aluminum. DRIVE TIRES 10 x 3-7, semi-pneumatic with die-cast aluminum rims with bearing assembly. FRONT TIRES 8 x 2-6, semi-pneumatic with die-cast aluminum rims with bearing assembly. BAG CAPACITY 3 bushels (24 gallon). SAFETY PACKAGE Zone start/blade Brake Clutch (BBC). ENGINES AVAILABLE Kawasaki FJ180V KAI (180cc). DRIVE SYSTEM Self-propelled rear-wheel gear-drive. TRANSMISSION 3-speed. SPEED CONTROL Finger-tip bail controls, infinitely variable. SPEED 2.0 mph (3.2 kph) to 4.1 mph (6.6 kph) forward. FUEL CAPACITY 1-gallon (3.79-L). MG481KA362 2 Blades at 18.00" 451 lbs in. (119.4 cm) 78.0 in. (198.1 cm) 43.0 in. (109.2 cm) MG481KA483P 3 Blades at 16.25" 501 lbs in. (147.1 cm) 73.0 in. (185.4 cm) 43.0 in. (109.2 cm) MG481KA483 3 Blades at 16.25" 501 lbs in. (147.1 cm) 73.0 in. (185.4 cm) 43.0 in. (109.2 cm) MG481KA362CA 2 Blades at 18.00" 456 lbs in. (119.4 cm) 78.0 in. (198.1 cm) 43.0 in. (109.2 cm) MG481KA483CA 3 Blades at 16.25" 506 lbs in. (147.1 cm) 78.0 in. (198.1 cm) 43.0 in. (109.2 cm) STYLE Fixed-deck, side-discharge standard, with molded discharge chute and option to bag or mulch. Series 3 (32" and 36"), Series 4 (48"). WIDTHS AVAILABLE 32" (81.3 cm), 36" (91.4 cm), 48" (121.9 cm). CUTTING HEIGHTS 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.64 cm) increments. BLADES Excalibur 0.20"-thick (5.1 mm) alloy steel. BLADE SPINDLES 1.0" (25.4 mm) diameter. BLADE-TIP SPEED Approximately 18,500 fpm. ENGINE DECK 7-gauge welded steel. STEERING & MOTION CONTROL Pistol-grip or Enhanced Control System (ECS). TURNING RADIUS Zero-turn around center of inside tire. FRONT CASTER TIRES Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic. DRIVE TIRES 32": 13 x 5.0-6, 4-ply Turf Saver ; 36" and 48": 13 x 6.5-8, 4-ply Turf Master. SAFETY PACKAGE Operator Presence Controls (OPC). ENGINES AVAILABLE Kawasaki V-Twin FS481V. DRIVE SYSTEM Direct drive from transmission to double-belt wheel drives (single-belt on 32"). TRANSMISSION 5-speed Peerless A. SPEED CONTROL Padded shift lever. SPEED 2.0 mph (3.2 kph) to 6.2 mph (10.0 kph) forward, reverse assist. FUEL CAPACITY 5-gallon (18.9-L) fuel tank

29 WALK-BEHINDS WALK-BEHIND MOWER SPECIFICATIONS WALK-BEHIND MOWER SPECIFICATIONS WALK-BEHINDS VIKING Model Blades Weight Width (deflector down) Length Height VH481KA362 2 Blades at 18.00" 481 lbs in. (119.4 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm) VH481KA362CA 2 Blades at 18.00" 486 lbs in. (119.4 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm) VH481KA483 3 Blades at 16.25" 531 lbs in. (147.1 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm) VH481KA483CA 2 Blades at 18.00" 536 lbs in. (147.1 cm) 78.0 in. (198.1 cm) 43.2 in. (109.7 cm) STYLE Fixed-deck, side-discharge standard, with molded discharge chute and option to bag or mulch. Series 3 (36"), Series 4 (48"). WIDTHS AVAILABLE 36" (91.4 cm), 48" (121.9 cm). CUTTING HEIGHTS 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.64 cm) increments. BLADES Excalibur 0.20"-thick (5.1 mm) alloy steel. BLADE SPINDLES 1.0" (25.4 mm) diameter. BLADE-TIP SPEED Approximately 18,500 fpm. FRONT CASTER TIRES Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic. DRIVE TIRES 16 x 6.5-8, 4-ply Turf Master. ENGINES AVAILABLE Kawasaki V-Twin FS481V. PTO ENGAGEMENT Mechanical blade engagement with blade brake. ENGINE DECK 7-gauge, heavy-duty, welded steel. STEERING & MOTION CONTROL Hydro drive with Enhanced Control System (ECS), forward/ reverse, left/right or zero-turn. TRACKING ADJUSTMENT Insta-Track. DRIVE-WHEEL RELEASE Easy-access dump valves, with engine on or off. TURNING RADIUS True zero-turn. SAFETY PACKAGE Operator Presence Controls (OPC). PARKING BRAKE Standard mechanical compression. DRIVE SYSTEM Two Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts. TURF TRACER S-SERIES SPEED Turf Tracer S-Series has infinitely variable selection from mph (10 kph) forward, mph (3.5 kph) reverse. FUEL CAPACITY 5-gallon (18.9-L) fuel tank. LUBRICATION Synthetic oil with continuous filtration of hydro oil. DRIVE-WHEEL RELEASE Allows unit movement without engine running. SAFETY PACKAGE Operator Presence Controls (OPC). DECK LIFT Standard. Model Blades Weight Width (deflector down) Length Height TTS481KA363 2 Blades at 18.00" 569 lbs in. (118.6 cm) 77.7 in. (197.4 cm) 42.0 in. (106.7 cm) TTS481KA363CA 2 Blades at 18.00" 574 lbs in. (118.6 cm) 77.7 in. (197.4 cm) 42.0 in. (106.7 cm) TTS600KAE483 3 Blades at 16.25" 621 lbs in. (147.1 cm) 73.7 in. (187.2 cm) 42.0 in. (106.7 cm) TTS481KA483 3 Blades at 16.25" 602 lbs in. (147.1 cm) 73.7 in. (187.2 cm) 42.0 in. (106.7 cm) TTS541KA483CA 3 Blades at 16.25" 626 lbs in. (147.1 cm) 73.7 in. (187.2 cm) 42.0 in. (106.7 cm) TTS600PKAE483 3 Blades at 16.25" 689 lbs in. (147.1 cm) 73.7 in. (187.2 cm) 42.0 in. (106.7 cm) TTS541KA523 3 Blades at 18.00" 636 lbs in. (161.3 cm) 75.9 in. (192.8 cm) 42.0 in. (106.7 cm) TTS600KAE523 3 Blades at 18.00" 659 lbs in. (161.3 cm) 75.9 in. (192.8 cm) 42.0 in. (106.7 cm) STYLE Full-floating, side-discharge standard, with molded discharge chute and option to bag or mulch. WIDTHS AVAILABLE 36" (91.4 cm), 48" (121.9 cm), 52" (132 cm). CUTTING HEIGHTS 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. BLADES Excalibur 0.20"-thick (5.1 mm) alloy steel. BLADE SPINDLES 1.75" (44.5 mm) diameter. BLADE-TIP SPEED Approximately 18,500 fpm. FRONT CASTER TIRES Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic. DRIVE TIRES 36": 16 x 6.5-8, 4-ply Turf Master ; 48", 52": 16 x 735-8, 4-ply Turf Master. ENGINES AVAILABLE Kawasaki V-Twin FS481V, FS541V, FS600V. PTO ENGAGEMENT Mechanical blade engagement with blade brake. ELECTRICAL SYSTEM 12-V battery, 15-amp alternator (only on electric-start models)

30 WALK-BEHINDS WALK-BEHIND MOWER SPECIFICATIONS ENGINE DECK 7-gauge, heavy-duty, welded steel. STEERING & MOTION CONTROL Hydro drive with Enhanced Control System (ECS), forward/ reverse, left/right or zero-turn. TRACKING ADJUSTMENT Insta-Track. DRIVE-WHEEL RELEASE Easy-access dump valves, with engine on or off. TURNING RADIUS True zero-turn. SAFETY PACKAGE Operator Presence Controls (OPC). PARKING BRAKE Standard mechanical compression. DRIVE SYSTEM Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts. TURF TRACER X-SERIES SPEED mph (10.9 kmph) forward, mph (3.6 kmph) reverse. FUEL CAPACITY 5-gallon (18.9-L) fuel tank. LUBRICATION Synthetic oil with continuous filtration of hydro oil. DRIVE-WHEEL RELEASE Allows unit movement without engine running. SAFETY PACKAGE Operator Presence Controls (OPC). DECK LIFT Standard. ULTRAVAC SPECIFICATIONS S-SERIES 2-BAGGER FOR ALL 48" AND 52" LAZER Z MODELS COLLECTION BAGS Two commercial-grade, cloth mesh bags with reinforced bottoms. TOTAL COLLECTION CAPACITY 8 bushels (64 gallons). DUMP MECHANISM Manual lift-off. BLOWER TUBE Fixed, abrasion-resistant polyethylene. LZ E-Series 48" LZ E-Series 52" LZ S & X-Series 48" LZ S & X-Series 52" Overall Unit Length with Bagger " (259.7 cm) " (259.7 cm) " (259.7 cm) " (259.7 cm) Overall Unit Width with Bagger 62.50" (158.8 cm) 67.75" (172.1 cm) 62.50" (158.8 cm) 67.75" (172.1 cm) Total Bagging System Weight 266 lbs. (120 kg) 266 lbs. (120 kg) 309 lbs. (140 kg) 309 lbs. (140 kg) IMPELLER 5-bladed, 1/4"-thick (6.4 mm), abrasion-resistant steel with vertical axis. IMPELLER AXIS Vertical. IMPELLER HOUSING 0.187"-thick, abrasion-resistant steel. BEARINGS 1" (2.54 cm) sealed non-greasable bearings. COLLECTION SYSTEMS Model Blades Weight Width (deflector down) Length Height TTX640KCE N/A 439 lbs in. (216.9 cm) 45.0 in. (114.3 cm) TTX650EKCE N/A 439 lbs in. (216.9 cm) 45.0 in. (114.3 cm) TTX691KAE N/A 762 lbs in. (216.9 cm) 45.0 in. (114.3 cm) TTX691KAECA N/A 434 lbs in. (216.9 cm) 45.0 in. (114.3 cm) TTX691PKAE N/A 448 lbs in. (216.9 cm) 45.0 in. (114.3 cm) FMD524 3 Blades at 18" 292 lbs in. (162.6 cm) S-SERIES 3-BAGGER FOR ALL FULL-SIZE 60" AND 72" LAZER Z MODELS LZ S & X-Series 60" LZ S & X-Series 72" LZ DS-Series 60" LZ DS-Series 72" LZ E-Series 60" Overall Unit Length with Bagger 107.0" (271.8 cm) 110.0" (279.4 cm) 110.9" (281.6 cm) 115.4" (293 cm) 107.0" (271.8 cm) Overall Unit Width with Bagger 74.94" (190.3 cm) 87.38" (221.9 cm) 74.94" (190.3 cm) 87.38" (221.9 cm) 74.44" ( cm) Total Bagging System Weight 449 lbs. (204 kg) 406 lbs. (184 kg) 261 lbs. (118.4 kg) 268 lbs. (122.6 kg) TBD FMD604 3 Blades at 20.5" 333 lbs in. (182.9 cm) STYLE Full-floating UltraCut Series 4. Side-discharge standard, with molded discharge chute and option to bag or mulch. WIDTHS AVAILABLE 52" (132 cm), 60" (152.4 cm). CUTTING HEIGHTS 1.5" (3.8 cm) to 4.5 (11.4 cm) in 0.5" (1.3 cm) increments. BLADES Excalibur 0.20"-thick (5.1 mm) alloy steel. BLADE SPINDLES 1.75" (44.5 mm) diameter. BLADE-TIP SPEED Approximately 18,500 fpm. FRONT CASTER TIRES Double-yoke, semi-pneumatic, 11 x 4.0-5, smooth-tread. DRIVE TIRES 18 x 8.5-8, 4-ply Turf Master. ENGINES AVAILABLE Kohler Command CV640; Kawasaki V-Twin FX691V; Kohler Command EFI ECV650. PTO ENGAGEMENT Electromagnetic 200-ft-lbs clutch. ELECTRICAL SYSTEM 12-V battery, 15-amp alternator. ENGINE HOURMETER Standard. COLLECTION BAGS Three commercial-grade, cloth mesh bags with reinforced bottoms. TOTAL COLLECTION CAPACITY 13.4 bushels (107.2 gallons). DUMP MECHANISM Manual lift-off. BLOWER TUBE 7.75"-diameter, fi xed, abrasion-resistant polyethylene. IMPELLER 5-bladed, abrasion-resistant steel, 15.0" diameter. IMPELLER AXIS Vertical. IMPELLER HOUSING 0.187"-thick abrasion-resistant steel. BEARINGS 1" (2.54 cm) sealed non-greasable bearings

31 COLLECTION SYSTEMS ULTRAVAC SPECIFICATIONS X-SERIES FOR ALL 48" AND 52" LAZER Z MODELS ULTRAVAC SPECIFICATIONS 2-BAGGER OPTION FOR ALL QUEST AND PIONEER S-SERIES MODELS COLLECTION SYSTEMS LZ E-Series 48" LZ E-Series 52" LZ S & X-Series 48" LZ S & X-Series 52" All Quest and Pioneer S-Series 44" All Quest and Pioneer S-Series 48" All Quest and Pioneer S-Series 52" Pioneer S-Series 60" Overall Unit Length with Bagger 102.0" (259.1 cm) 102.0" (259.1 cm) 102.0" (259.1 cm) 102.0" (259.1 cm) Overall Unit Length with Bagger 97" (246 cm) 97" (246 cm) 97" (246 cm) 98.6" (250.5 cm) Overall Unit Width with Bagger 62.50" (158.8 cm) 67.75" (172.1 cm) 62.50" (158.8 cm) 67.75" (172.1 cm) Overall Unit Width with Bagger 58" (147 cm) 62" (157 cm) 66" (168 cm) 74" (188 cm) Total Bagging System Weight 288 lbs. (130 kg) 288 lbs. (130 kg) 331 lbs. (150 kg) 331 lbs. (150 kg) Total Bagging System Weight 125 lbs. (276 kg) 125 lbs. (276 kg) 125 lbs. (276 kg) 125 lbs. (276 kg) COLLECTION BAGS Commercial-grade steel and polyethylene hopper with rear discharge door. Commercial-grade cloth mesh door panel with molded lower wear panel. TOTAL COLLECTION CAPACITY 7 bushels (56 gallons). DUMP MECHANISM Single-motion actuation from operator's seat. BLOWER TUBE Fixed, abrasion-resistant polyethylene. IMPELLER 5-bladed, 1/4"-thick (6.4 mm), abrasion-resistant steel. IMPELLER AXIS Vertical. IMPELLER HOUSING 0.187"-thick abrasion-resistant steel. BEARINGS 1" (2.54 cm) sealed, non-greasable bearings. COLLECTION BAGS 2 commercial-grade, cloth mesh bags with reinforced bottoms. TOTAL COLLECTION CAPACITY 8 bushels (64 gallons). DUMP MECHANISM Manual lift-off. BLOWER TUBE Fixed, abrasion-resistant, molded polyethylene. IMPELLER 5-bladed, 1/4"-thick (6.4 mm), abrasion-resistant steel with vertical axis. IMPELLER AXIS Vertical. IMPELLER HOUSING 0.187"-thick, abrasion-resistant steel. BEARINGS 1" (2.54 cm) sealed, non-greasable bearings. X-SERIES FOR ALL FULL-SIZE 60" AND 72" LAZER Z MODELS LZ S & X-Series 60" LZ S & X-Series 72" LZ DS-Series 60" LZ DS-Series 72" LZ E-Series 60" Overall Unit Length with Bagger 106.5" (270.5 cm) 109.5" (286.2 cm) 109.4" (278 cm) 113.9" (289.4 cm) 106.5" (270.5 cm) Overall Unit Width with Bagger 75.0" (190.5 cm) 87.25" (221.6 cm) 74.9" (190.3 cm) 87.4" (221.9 cm) 75.0" (190.5 cm) Total Bagging System Weight 477 lbs. (216 kg) 434 lbs. (197 kg) 331 lbs. (150.1 kg) 338 lbs. (153.3 kg) TBD COLLECTION BAGS 3 commercial-grade, cloth mesh bags with reinforced bottoms. TOTAL COLLECTION CAPACITY 13.4 bushels (107.2 gallons). DUMP MECHANISM Manual lift-off. BLOWER TUBE 7.75"-diameter, fi xed, abrasion-resistant polyethylene. IMPELLER 5-bladed, abrasion-resistant steel, 15.0" diameter. IMPELLER AXIS Vertical. IMPELLER HOUSING 0.187"-thick abrasion-resistant steel. BEARINGS 1" (2.54 cm) sealed non-greasable bearings

..14 Lazer Z DS-Series...16 Navigator...18 Vantage.

..34 Riding Mowers...35 Walk-Behind Mowers.

32 INDEX INDEX Brand Stories Exmark Difference...4 Exmark Commercial Quality...6 Exmark Cutting Technology...8 Riding Mowers Quest...10 Pioneer...12 Lazer Z...14 Lazer Z DS-Series...16 Navigator...18 Vantage...20 Mower Charts...22 Brand Stories ECS Controls...26 Walk-Behind Mowers Commercial Wide-Area Walk-Behinds...30 Mower Charts...32 Warranty & Cost Benefits...34 Accessories & Options UltraVac...34 Riding Mowers...35 Walk-Behind Mowers...37 All Mowers...39 Brand Stories Cost of Ownership and Productivity...40 Specifications Riding Mowers...42 Walk-Behind Mowers...52 UltraVac...59

potential, multiplied.

potential, multiplied. VISIT WWW.EXMARK.COM FOR: Product Information Technical Support Parts Look-Up Dealer Information Operational and Safety Information Clothing and Identification Programs Financing and Promotions Pre-Owned