Catalogue 2010/2011. Products of SMC Outdoor Systems SMC 户外产品样本. ideas for electric

Transcription

1 Catalogue 2010/2011 Products of SMC Outdoor s SMC 户外产品样本 ideas for electric

2 FOR WHAT WE STAND To the same extent that the importance of electrical energy has grown, ABN with the GEYER system. It has accompanied and taken part in the development from the very beginning. Today competent specialists are involved in committees and associations that define the guidelines for tomorrow. They encourage products for a future in which an interconnected world cannot afford any breakdowns. The know-how acquired during many years and the ability to think ahead are the particular strengths of ABN. ABN combines a strong sense of responsibility, innovative ideas and safety because even today it is the clever people who work in the background and who enable everything that we are taking for granted. If there is indeed a so-called plug and play society and we all are a part of it then ABN does its daily share that this society works so perfectly. Supplying systems for connecting, safeguarding and distributing, ABN and GEYER system products are applied at the switchpoints of convenience, safety and reliability so that people can do a good job with their electrical tools, that they are reliably supplied with the necessary energy and that they can also enjoy the comforts of modern technology. Our inherent attitude is to work for human beings and not just produce any old product. That way we can achieve solutions of sustainable value. We would not call it a philosophy but rather our business principle.

3 OUR HISTORY Werner Braun Chairman of the Board of Directors Andreas Braun Managing Director, Technology Marcus Braun Managing Director, Sales Roland Schmiederer Managing Director Nuremberg ABN is a medium-sized family business with over 60 years tradition and experience in the electrical and building technology. The parent company, at the same being the main works, is located at Neuenstadt upon the Kocher river in Baden- Württemberg, in the southwestern part of Germany. The company was founded 1947 by Albert Braun and has supplied many millions of systems to date. In 2006 ABN was converted into a public limited company. Currently ABN employs a staff of approximately 200 people at five locations in Germany. Partners in Europe supply high-quality products to ABN. A big step into the future was the acquisition of the trademark rights, the patents and production tools of the renowned company GEYER in Nuremberg in summer of With this acquisition ABN is well prepared to be your strong partner for indoor and outdoor system solutions. In Germany ABN runs head offices in Neuenstadt, Cologne, Berlin and Dresden. The factory supplying products for outdoor electricity is located in Nuremberg. The Nuremberg factory manufactures special products for power companies and power grid operators for indoor and outdoor applications. Research work and a test lab ensure quality standards. More than 30% of the production is supplied to customers outside Germany with increasing success.

4 PRODUCTION State of the art production facilities in Germany ensure jobs, excellent cost effectiveness, a high quality standard and maximum flexibility. The fully automatic manufacturing facilities for electrical enclosures in the Neuenstadt factory.

5 PLASTICS TECHNOLOGY Plastic component production: Approx. 50 plastic injection molding machines with a mold clamping force of 25 to 600 tons with state of the art feed and post-treatment systems, which are in part fully automatic, ensure an unvaryingly high quality of the roughly 700 system parts made of special plastics which are used in ABN products. Modern CAD systems, certifications according to ISO Standard and a lab with comme il faut equipment ensure that only parts conforming to standards and auditable according to VDE Standard can be used in ABN systems. ABN s department of research and construction of tools and systems is able to meet the high demands and the latest provisions. More than 100 patents and registered designs are an expression of the continued motivation of our specialists.

6 OUTDOOR ELECTRICITY With the GEYER system ABN produces outdoor electricity. Be it an outdoor control for a car wash, a space-saving and extremely decorative and practical connecting system for a singlefamily home, one of the countless electrical distribution boxes on the streets, energy bollards for shipping piers or market places all these applications require a specific know-how in order to rank first. Operators of electric transmission networks shoulder a special responsibility for the supply of electricity. The number one priority is safety first, allowing no room for compromises. The requirements for material, processing quality, operating safety and life-cycle are extremely high. All products are developed and produced in close cooperation and continuous exchange of experience in order to provide customized solutions for all clients. The high quality of the ABN and GEYER system products proved itself in practice even under extreme conditions.

7 INDOOR ELECTRICITY AHC ABN House Comfort With regard to its cost effectiveness AHC is an interesting alternative to traditional bus systems as for example EIB. It is adjusted to the requirements of the building installation technology. By using AHC, the implementation of residential, commercial and public building projects becomes very easy. ESPRO the meter cabinet of the future for the electronic household meter is ABN s response to the changes on the European energy market and was developed in close cooperation with customers and leading distribution energy companies. Small Distribution Boards Its elegant proportions make the small distribution board AMIGO a showpiece of modern electrical installation. A large variety of unrivalled assembly benefits make AMIGO the electrician s best friend. ARS For systems up to 4,000 (over 2,500) ampere ABN supplies the ARS ABN modular switchgear cabinet system. This sophisticated system allows for countless variations for builders of switchgear cabinets. PROFIKS Meter Board and Distribution The meter board and distributor system with the many usages and assembly benefits for electricians and panelbuilders: Cabinets for all kinds of residential housing, transducer measurement systems for functional buildings, telecommunications panels, over-voltage protection in the pre-counter sector and connection technology as well as panel building with individual components, complete modules and preassembled panels. Our system offers a standard solution direct from our central warehouse for every situation.

8 SERVICE Regionalkatalog Nord-West Zählerplatz- und Verteilertechnik Kleinverteiler VNB/ öffentl. Auftraggeber Hausanschlusstechnik Kabelverteilersysteme In the modern seminar rooms ABN provides training courses for customers, staff of wholesale partners and international business partners. Strom im Freien Zählertafeln Hausanschlusstechnik Baustromverteiler A-Click software for customers and planners for quick planning (assembly drawing, circuit diagram) and calculations 20 highly experienced and competent ABN calculators in the company headquarters and its branch offices provide offers geared to market requirements within a short space of time Training courses, seminars, workshops at the Neuenstadt training center and in the seminar rooms at the Cologne, Nossen, Dahlewitz and Nuremberg branches Information on new products, catalogue and price list downloads as well as the e-catalogue on the ABN website: abn-elektro.de Find the ABN TAB compatible meter cabinet in a matter of seconds via the Internet: the new ABN meter board planner Catalogues, programmes, sales promotion on the up-to-date ABN CD Rom Use the ABN partner offers!

9 REFERENCES Sony Tower Royal Post of the Netherlands, Den Haag From when the company s founder, Albert Braun, began almost 60 years ago until the present day millions of electrical systems have been equipped with ABN systems by ABN s partners or national dealerships. Residential buildings, commercial buildings, sports halls, administration buildings, department stores, markets, industry, solar systems, hotels, kindergartens and many more. ABN is your partner for renewable energies. ABN is a brand for thousands of satisfied customers in the electrical business. Consumers and clients are electrical specialists via the relevant electrical wholesale channel as well as certified panel builders, power companies and power grid operators. Reichstag, Berlin Sony Center

10 4000 A ARS Modular switchboard system 1700 A PROFIKS free standing and switchgear cabinets 540 A Outdoor electricity 355 A PROFIKS / ESPRO meter board technology PROFIKS wall mounted and free standing cabinets 125 A PROFIKS flat distribution boards 63 A Maximum system-current AMIGO distribution Boards

11 H3 OUTDOOR APPLICATIONSH1 INDOOR DISTRIBUTION BOARDS Pillars Cable Distribution Cabinets Built-in units and accessories Distribution cabinets for festival events and market places Spare parts and accessories H4 CONSUMER SUPPLY TECHNOLOGY Wall mounted connection boxes Main supply units Distribution cabinets with wall mounting pedestal Accessories

12

13 CONTENTS PAGE OUTDOOR APPLICATIONS Pillars 3 12 Advantages and technical information 4 5 Product range 6 The pillar system 7 Series 142, 162, 152, 155, 157, 172, 175, 177, 202, 205, Accessories 10 Series 152, 155, 157, 172, 175, 177, 202, 205 und Series 115, round and 135, round 12 Cable Distribution Cabinets Advantages and technical information Product range 16 Size 00/Height Size 0/Height 845, 1005, Size 1/Height 845, 1005, Size 2/Height 845, 1005, Ordering examples 27 Built-in units and Connections for cabinets and pillars Distribution Cabinets for festival events and market places Advantages and technical information Distribution cabinet, fixed version 34 RONDOmobil 34 Socket outlet combinatiion fpr RONDO pillar 35 Size 0, 1, 2/Height Ordering examples 39 Built-in units and accessories Spare parts und Accessories 43 for pillars, cabinets and cabinets for festival events and market places H 3 H3-1

14

15 Pillars Series 142, 162 Series 152, 157, 172, 175, 177, 202, 205, 207 Series 115, 135 round Accessories H 3 GEYER is THE specialist for outdoor enclosures. The experience gained since 1927 enables the GEYER to be at the forefront in the development and production of glass fibre reinforced polyester enclosures. GEYER pillars differ from cabinets in that the enclosure and pedestal are a onepiece unit rather than separate units. Features: Various applications possible due to modular system Enclosure and pedestal are building one unit Space-saving and for service and meter reading always accessible With a very wide range of internal options available from within the GEYER product range all designs and applications can be catered for. A popular application for this product is the provision of energy metering on the boundary of domestic households allowing energy company personnel to read meters etc. without needing access to private property. H3-3

16 Pillars Advantages Series 142, 162 Low built height of enclosure Small dimensions Modern ribbed surface design Surface enclosure can be painted on request Advantages Series Advantages Series 115 and 135, round Award achieved for excellent design Functional and all-purpose usable Weatherproof ideal for outdoors Plenty of applications e.g. Outdoor house connection Cable distribution Distribution cabinets for festival events Pump-monitoring for lifting platforms power supply at petrol stations Custom specific equipment on request Modern ribbed surface design Recycable, because no pressed metal parts used in the enclosure Surface enclosure can be painted on request Flush fitted door handle made of impactplastic At free standing the doors can be opened to an angle of 180 Cabinets can be mounted side by side, door angle 90 possible Doors are easily to put on its hinges and to take off Door hinge left and right possible without alteration RONDO with gas-metering H3-4

17 Pillars Technical information Series 142, 162 Series 152, 155, 157, 172, 175, 177, 202, 205, 207 Series 115,135 round Protection grade IP 44 Protection grade IP 44 Protection grade IP 44 Technical specification of reinforced polyester Technical specification of reinforced polyester Technical specification of reinforced polyester Colour Lightgrey according to RAL 7035 Colour Lightgrey according to RAL 7035 Colour Lightgrey according to RAL 7035 Dimensions see design variations Dimensions see design variations Dimensions see design variations Door: plug-in door (no hinges) Locking device Locking system suitable for one ore two cylinders with key Pedestal With cable support bar angle iron 40 x 40 x 3 mm On one side one opening for temporary connection from outside. This opening can be closed from inside after using (on request) Built-in Solutions: (on request) Distribution panels Locking device Three point locking system suitable for: one ore two cylinders with key or triangular lock or square lock Pedestal With cable support bar angle iron 40 x 40 x 3 mm On one side one opening for temporary connection from outside. This opening can be closed from inside after using (on request) Built-in Solutions: (on request) Distribution panels NH-Fuse strips size 2 NH-Fuse strips size 00 Door: plug-in door (no hinges) Locking device suitable for one cylinder lock Pedestal Pillar and pedestal are one unit Built-in solutions Mounting plate H 3 Ventilation On bottom and top side of the cabinet there are labyrinthine slots Accessory for the pedestal (see page H3-44 ground grid) Base plate made of cast iron (on request) Rods to adjust the pedestal on the base plate (on request) Earth lead (on request) DIN-rails as equipotential conductor DIN-rails made of sheet-steel may be used as interconnection conductors for grounding DIN-rail terminals via feedthrough conntection. Grounding DIN-rail terminals, which are mounted as feedthrough connection on DIN-rails must be in accordance to DIN VDE DIN rails must be made of Cu or Al, if these are used as protective earth (acc. to DIN VDE part C.3). Flat DIN-rail, Cu Elevated DIN-rail, Cu To reduce condensation water inside the cabinet it is recomended to fill the pedestal up the height of the cable support bar angle iron with a filling compound. The filling compound (25l plastic bag Reference No ; see page H3-44) should be filled in approx mm. Ground grid with adjustment roots see page H3-44) H3-5

18 Pillars Product range Type 142 Type 162 Type 152 Type 155 Type 157 Type 172 Type 175 Type 177 Type 202 Type 205 Type 207 Type 115 Type 135 H3-6

19 Pillars The pillar Mounting plate self extinguishing empty cabinet SL... H 3 fixing set for DE-Panels DE panels DIN rail distance 150 mm cable distribution pillar SK... NH fuse rails H3-7

20 Pillars Mounting plates, made of self extingnishing plastie, thickness 6 mm H x W (height x width) for individual build-up Overview empty pillars for individual build-up Type for SL x 276 mm for SL x 276 mm SL 142 SL 162 SL 142 P SL 162 P * with mounting plate included Type SY M SY M for SL x 278 mm for SL x 500 mm for SL x 755,5 mm SL 152 SL 155 SL 157 SL 152 P* SL 155 P* SL 157 P* SY M SY M SY M Type for SL x 278 mm for SL x 500 mm for SL x 756 mm SL 172 SL 175 SL 177 SL 172 P* SL 175 P* SL 177 P* SY M SY M SY M Type for SL x 278 mm for SL x 500 mm for SL x 756 mm SL 202 SL 205 SL 207 SL 202 P SL 205 P SL 207 P SY M SY M SY M build-up with mounting plate build-up with panels H3-8

21 Pillars Fixing sets for panels with membrane flange for feeding cables other flanges see accessories. DE-panels - DIN-rail distance 150mm for built in into all pillars equipped with fixing set. Without Earth and Neutral (N/PE) terminals. Distribution panels are built in accordance with IEC439-3 / EN / DIN VDE 0660 part 504 / DIN VDE Panels prepared for NH fuse disconnectors are designed for GEYER, Jung, Efen, Schneider and Weber fuse disconnectors. For cover frames see accessories. for modular devices 250mm 500mm for modular devices and terminals with mounting plate on adjustable brackets. including protecting cover without slots for modular devises,terminals andnh 00 fuse disconnectors 250mm 500mm 250mm 500mm 250mm 250mm for NH 1 fuse disconnectors Metering Panel 250mm for SL 142/162 SY 41 TA DE 0414 DE 0413 DE 0410 M DE 0411 TA DE 0410 TB for SL 162 H 3 without wiring SY 51 TA not to be used with metering panels for SL 152 for SL 155 for SL 157 for SL 172 for SL 175 for SL 177 DE 0515 DE 0525 DE 0513 DE 0523 DE 0510 M DE 0520 M DE 0511 TA DE 0510 TB SD 511 SY 51 T SY 52 T SY 53 T for SL 202 for SL 205 for SL 207 without wiring SY 61 T SY 62 T SY 63 T DE 0616 DE 0626 DE 0614 DE 0624 DE 0610 M DE 0620 M DE 0614 TA DE 0613 TB SD 611 H3-9

22 Pillars Accessories Type Reference-No. Type Reference-No. Membrane flange DY F Earth (PE)/neutral (N)-terminals (for replacement) screw-less type Flange for metrical fittings with knockouts for 7 x M 20 / M 12 and 2 x M 32 /M 20 and 1 x M 40 / M32/M20 DY F N/PE-terminals DY 83 K 6 x 2,5-16 mm 2 each screw type and 21 x 1,5-4 mm 2 each screw-less type N/PE-terminals DY 84 K 3 x 2,5-16 mm 2 each screw type and 10 x 1,5-4 mm 2 each screw-less type Plain flange DY F Flange for metrical fittings DY F (locking only from the inside) with knockouts for 7 x M 20 / M 12 and 2 x M 32 /M 20 and 1 x M 40 / M32/M20 Feeding flange DY F for large cables (locking only from the inside) max. 4 x 120 mm 2 Fixining block for DY 85 D screw-less Earth and Neutral terminal (N/PE) the srew-less terminal block can be fitted on or behind the the rail 1 Set = 2 pieces (left/right) including fixing material Insulating spacer for DINrail (1set = 2 pieces) incl. screws DY D Earth/neutral terminal for metering panels (3 x 16/2 x 25 mm 2 ) each DY K Sealing part 1 set = 2 pieces DY A Terminal according to VDE 0603, part 2 Type C, fingerproof 25/16 mm 2 3 fixing points per pole 1 x 3pole AZ 325 B 1 x 4pole AZ 425 B 1 x 5pole AZ 525 B 1 x 6pole AZ 625 B NH fuse disconnector size 00, 160 A, 3-pole for baseplate mounting without cover-frame screw connection M8 x 20 DY 0101 N feeding and outgoing terminal bridge-clamp for DY 0102 N round conductors 16-70mm 2 feeding and outgoing terminal Blank piece RAL mm long 1 Set = 10 pieces DY 69 X NH fuse disconnector DY1101 N size 1, 250 A, 3-pole for baseplate mounting without cover-frame screw connection M10 x 20 feeding and outgoing terminal Blank piece lockable for main MCB`s DY A cover frame for NH fuse disconnector size 00 for 1 NH00 size 00 for 2 NH00 size 1 size 2 DY 0191 N DY 0192 N DY 1191 N DY 2191 N H3-10

23 Cable distribution Pillars Type 152, 155, 157, 172, 175,177, 202, 205 and 207 with busbar-system Type Reference-No. Type Reference-No. Type Reference-No. Type 152 SK 152 A Type 172 SK 172 A Type 202 SK 202 A Pillar with busbar-system 4 x E-Copper 30 x 6 mm for max 2 build-in units 100 mm wide (each) Pillar with busbar-system 4 x E-Copper 30 x 6 mm for max 2 build-in units 100 mm wide (each) Pillar with busbar-system 4 x E-Copper 30 x 6 mm for max 2 build-in units 100 mm wide (each) Type 155 SK 155 A Type 175 SK 175 A Type 205 SK 205 A H 3 Pillar with busbar-system 4 x E-Copper 30 x 6 mm for max 4 build-in units 100 mm wide (each) Pillar with busbar-system 4 x E-Copper 30 x 6 mm for max 4 build-in units 100 mm wide (each) Pillar with busbar-system 4 x E-Copper 30 x 6 mm for max 4 build-in units 100 mm wide (each) Type 157 SK 157 A Type 177 SK 177 A Type 207 SK 207 A Pillar with busbar-system 4 x E-Copper 30 x 6 mm for max 7 build-in units 100 mm wide (each) Pillar with busbar-system 4 x E-Copper 30 x 6 mm for max 7 build-in units 100 mm wide (each) Pillar with busbar-system 4 x E-Copper 30 x 6 mm for max 7 build-in units 100 mm wide (each) H3-11

24 RONDO-Pillars round design Type 115, round Type Reference-No. Empty pillar SL 115 with door 330 mm Pillar with mounting plate 260 x 350 x 6 mm (PVC) SL 115 P Type 135, round Type Reference-No. Empty pillar SL 135 with door 330 mm Pillar with mountig plate 260 x 350 x 6 mm (PVC) SL 135 P Empty pillar without locking cylinder with door 530 mm SL 135 C Pillar with mountig plate 290 x 550 x 6 mm (PVC) SL 135 PC Pillar with mountig plate 200 x 537 x 6 mm (PVC) and cut-out for socket outlet cables SL 135 PA H3-12

25 Cable Distribution Cabinets Size 00/845 Size 0/845 0/1355 Size 1/845 1/1355 Size 2/845 2/1355 with asymmetrical doors Size 1/845/1005/1355 Size 2/845/1005/1355 H 3 Cable Distribution Cabinets from GEYER are suitable for a very wide range of applications. Their modular design makes it possible. There are four widths, three heights and five different pedestals available. The versions available with asymmetrical doors mean that many different applications could be covered. They are regularly used for many telecommunications uses, broad band cable networks and also energy metering applications. Features Various applications possible due to modular system 4 sizes, 3 heights, 5 kinds of pedestals Types with asymmetric doors H3-13

26 Cable Distribution Cabinets Advantages Enclosures in modern ripped design avoids undesired poster Easy exchance of damaged parts Labyrinthic slots for life part protection modern ribbed surface easy exchange if parts get damaged Pedestal with standard site opening Locking handle with double locking system, one locking cylinder included Door opening angle 180 Doors with 3-point locking system expected break area in case of crash Various types of pedestals, e.g. flood type, for concrete mounting or wall pedestal. Flush fitted locking device made of high impact material. On request one or two locking cylinders. Door opening angle 180 (90 when 2 cabinets are fitted next to each other) Cabinets size 2 on request both doors with seperate locking handle. Doors can be unhinged easily Opening in the side on request Door hinge left and right possible without alteration H3-14

27 Cable Distribution Cabinets Technical specifications: Protection degree IP 43 on special request IP 44 with accessories Colour Lightgrey according to RAL 7035 Doors Door opening angle 180 (90 when 2 cabinets are fitted next to each other) Doors are easily to put on ist hinges and to take off Door hinge left and right possible without alteration DIN size 2 cabinets can be supplied with 2 seperate and independent lockable doors Dimensions: Cable Distribution Cabinets according to DIN CDC size 0/845 - H xwxd (mm) 845 x 585 x 315 CDC size 1/845 - H xwxd (mm) 845 x 780 x 315 CDC size 2/845 - H xwxd (mm) 845 x 1110 x 315 Cable Distribution Cabinets according to DIN 43629, part 1 CDC size 0/ H xwxd (mm) 1005 x 585 x 315 CDC size 0/ H xwxd (mm) 1355 x 585 x 315 CDC size 1/ H xwxd (mm) 1005 x 780 x 315 CDC size 1/ H xwxd (mm) 1355 x 780 x 315 CDC size 2/ H xwxd (mm) 1005 x 1110 x 315 CDC size 2/ H xwxd (mm) 1355 x 1110 x 315 Cable Distribution Cabinets CDC with pedestal size 00/845 - H xwxd (mm) 1745 x 480 x 315 Locking device Three point locking system suitable for: one or two cylinders with key or triangular lock or square lock Standard pedestal Side opening 55 mm for temporary connection. This opening can be closed from inside after using. With cable support bar angle iron 40 x 40 x 3 mm for fixing clamps. Cast iron base plate with rods to adjust the pedestal on the base plate (see accessories page H3-44) Pedestal for concrete mounting Side opening 55 mm for temporary connection. This opening can be closed from inside after using. The pedestal is fixed onto the ground by 4 bolts. Ventilation On bottom and top side of the cabinet there are labyrinthine slots Basement To reduce condensation water inside the cabinet it is recomended to fill the pedestal up the height of the cable support bar angle iron with a filling compound. The filling compound (25l plastic bag Reference No ; see page H3-44) should be filled in approx mm. Required qty. DIN size 00-2 plastic bags ; DIN size 1 and 2-3 plastic bags CDCs with assymetric doors CDCs with assymetric doors have a mounting plate factory fitted and also got a seperation wall inbetween the 2 doors. Both doors have an independent double locking system with 1 profile cylinder (second cylinder can be retrofitted). CDC-type space behind door H x W (mm) left right SL 081 V 740 x x 416 SL 082 V 740 x x 757 SL 101 V 900 x x 416 SL 102 V 900 x x 757 SL 131 V 1250 x x 416 SL 132 V 1250 x x 757 H 3 Cabinet Modern ripped surface design Easy replacement of damaged parts (e.g. sidewalls, roof) Recycable because no pressed metal parts used in the enclosure H3-15

28 Distribution Cabinets Product range Size 00 / Height 845 Size 0 / Height 845 Height 1005 Height 1355 Size 1 / Height 845 Height 1005 Height 1355 Size 2 / Height 845 Height 1005 Height 1355 H3-16

29 Cable Distribution Cabinets Size 00/Height 845 Type Reference-No. Empty cabinet, single door SL 084 Cabinet with mounting plate, single door HxWxD (mm) 750 x 358 x 6 (PVC) SL 084 P Cabinet bearing area Cabinet with busbar-system, single door E-Cu 30 x 6 mm (4-wire) max. 4 built-in units of 100 mm width SK 084 GA Standard pedestal (kit) size 00 (900 mm) SX 004 H 3 Proposed accessories: for CDC size 00 filling compound 2 x 95075, ground grid or ground grid with adjustment rods * Mounting depth in locking area Note: CDCs with busbar systems not being fully fitted with built-in units it is recommended to cover these empty spaces with a protection cover. For built-in units and protection-covers see page H3-41. H3-17

30 Cable Distribution Cabinets Size 0/Heigth 845 Type Reference-No. Empty cabinet, single door SL 080 Cabinet with mounting plate, single door HxWxD (mm) 750 x 500x 6 (PVC) SL 080 P Cabinet with busbar-system, single door E-Cu 30 x 6 mm (4-wire) max. 5 built-in units of 100 mm width SK 080 GA Standard pedestal (kit) size 0 (900 mm) SX 005 Higher pedestal flood type (kit) size 0, SX 030 (height 1125 mm) Pedestal for concrete mounting size 0 SX 014 Wall pedestal size 0 with coverplate SX 011 and 4 cable entries with stepped gasket for cable mm 2 Proposed accessories: for CDC size 0 filling compound 2 x 95075, ground grid or ground grid with adjustment rods * Mounting depth in locking area Note: CDCs with busbar systems not being fully fitted with built-in units it is recommended to cover these empty spaces with a protection cover. For built-in units and protection-covers see page H3-41. H3-18

31 Cable Distribution Cabinets Size 0/Height 1005 Type Reference-No. Empty cabinet, single door SL 100 Cabinet with mounting plate, single door HxWxD (mm) 895 x 491 x 6 (PVC) SL 100 P Cabinet with busbar-system, single door E-Cu 30 x 6 mm (4-wire) max. 4 built-in units of 100 mm width SK 100 GA Standard pedestal (kit) size 0 (900 mm) SX 005 Higher pedestal flood type (kit) size 0, SX 030 (height 1125 mm) H 3 Pedestal for concrete mounting size 0 SX 014 Wall pedestal size 0 with coverplate SX 011 and 4 cable entries with stepped gasket for cable mm 2 Proposed accessories: for CDC size 0 filling compound 2 x 95075, ground grid oder ground grid with adjustment rods * Mounting depth in locking area Note: CDCs with busbar systems not being fully fitted with built-in units it is recommended to cover these empty spaces with a protection cover. For built-in units and protection-covers see page H3-41. H3-19

32 Cable Distribution Cabinets Size 0/Height 1355 Type Reference-No. Empty cabinet, single door SL 130 Cabinet with mounting plate, single door HxWxD (mm) 1245 x 491 x 6 (PVC) SL 130 P Standard pedestal (kit) size 0 (900 mm) SX 005 Higher pedestal flood type (kit) size 0, SX 030 (height 1125 mm) Pedestal for concrete mounting size 0 SX 014 Wall pedestal size 0 with coverplate SX 011 and 4 cable entries with stepped gasket for cable mm 2 Proposed accessories: for CDC size 0 filling compound 2 x 95075, ground grid or ground grid with adjustment rods * Mounting depth in locking area Note: CDCs with busbar systems not being fully fitted with built-in units it is recommended to cover these empty spaces with a protection cover. For built-in units and protection-covers see page H3-41. H3-20

33 Cable Distribution Cabinets Size 1/Height 845 Type Reference-No. Empty cabinet, single door SL 081 Cabinet with mounting plate, single door HxWxD (mm) 750 x 658 x 6 (PVC) SL 081 P Cabinet with busbar-system, single door E-Cu 30 x 6 mm (4-wire) max. 7 built-in units of 100 mm width SK 081 GA CDC with asymmetrical doors and mounting plate 750 x 658 x 6 mm (PVC) on request: fixing onto a pedestal for temporary outdoor installation (SX 009) SL 081 V H 3 Standard pedestal (kit) size 1 (900 mm) SX 006 Higher pedestal flood type (kit) size 1, SX 031 (height 1125 mm) Pedestal for concrete mounting size 1 SX 015 Wall pedestal size 1 with coverplate SX 012 and 6 cabel entries with stepped gasket for cabel mm 2 Proposed accessories: for CDC size 1 filling compound 3 x 95075, ground grid or ground grid with adjustment rods * Mounting depth in locking area Note: CDCs with busbar systems not being fully fitted with built-in units it is recommended to cover these empty spaces with a protection cover. For built-in units and protection-covers see page H3-41. H3-21

34 Cable Distribution Cabinets Size 1/Height 1005 Type Reference-No. Empty cabinet, single door SL 101 Cabinet with mounting plate, single door HxWxD (mm) 895 x 686 x 6 (PVC) SL 101 P Cabinet with busbar-system, single door E-Cu 30 x 6 mm (4-wire) max. 7 built-in units of 100 mm width SK 101 GA CDC with asymmetrical doors and mounting plate HxWxD (mm) 895 x 686 x 6 (PVC) on request: fixing onto a pedestal for temporary outdoor installation (SX 009) SL 101 V Standard pedestal (kit) size 1 (900 mm) SX 006 Higher pedestal flood type (kit) size 1, SX 031 (height 1125 mm) Pedestal for concrete mounting size 1 SX 015 Wall pedestal size 1 with coverplate SX 012 and 6 cabel entries with stepped gasket for cabel mm 2 Proposed accessories: für CDC size 1 filling compound 3 x 95075, ground grid oder ground grid with adjustment rods * Mounting depth in locking area Note: CDCs with busbar systems not being fully fitted with built-in units it is recommended to cover these empty spaces with a protection cover. For built-in units and protection-covers see page H3-41. H3-22

35 Cable Distribution Cabinets Size 1/Height 1355 Type Reference-No. Empty cabinet, single door SL 131 Cabinet with mounting plate, single door HxWxD (mm) 1245 x 686 x 6 (PVC) SL 131 P CDC with asymmetrical doors and mounting plate HxWxD (mm) 1245 x 686 x 6 (PVC) on request: fixing onto a pedestal for temporary outdoor installation (SX 009) SL 131 V H 3 Standard pedestal (kit) size 1 (900 mm) SX 006 Higher pedestal flood type (kit) size 1, SX 031 (height 1125 mm) Pedestal for concrete mounting size 1 SX 015 Wall pedestal size 1 with coverplate SX 012 and 6 cable entries with stepped gasket for cable mm 2 Proposed accessories: for CDC size 1 filling compound 3 x 95075, ground grid or ground grid with adjustment rods * Mounting depth in locking area Note: CDCs with busbar systems not being fully fitted with built-in units it is recommended to cover these empty spaces with a protection cover. For built-in units and protection-covers see page H3-41. H3-23

36 Cable Distribution Cabinets Size 2/Height 845 Type Reference-No. Empty cabinet, double door SL 082 Cabinet with mounting plate, double door HxWxD (mm) 750 x 988 x 6 (PVC) SL 082 P Cabinet with busbar-system, double door E-Cu 30 x 8 mm (4-wire) max. 10 built-in units of 100 mm width SK 082 GA CDC with asymmetrical doors and mounting plate HxWxD (mm) 750 x 988 x 6 (PVC) on request: fixing onto a pedestal for temporary outdoor installation (SX 010) SL 082 V Standard pedestal (kit) size 2 (900 mm) SX 007 Higher pedestal flood type (kit) size 2 SX 032 (height 1125 mm) Pedestal for concrete mounting size 2 SX 016 Wall pedestal size 2 with coverplate SX 013 and 9 cable entries with stepped gasket for cable mm 2 Proposed accessories: for CDC Size 2 filling compound 3 x 95075, ground grid or ground grid with adjustment rods * Mounting depth in locking area Note: CDCs with busbar systems not being fully fitted with built-in units it is recommended to cover these empty spaces with a protection cover. For built-in units and protection-covers see page H3-41. H3-24

37 Cable Distribution Cabinets Size 2/Height 1005 Type Reference-No. Empty cabinet, double door SL 102 Cabinet with mounting plate, double door HxWxD (mm) 895 x 1016 x 6 (PVC) SL 102 P Cabinet with busbar-system, double door E-Cu 30 x 8 mm (4-wire) max. 10 built-in units of 100 mm widthn SK 102 GA CDC with asymmetrical doors and mounting plate HxWxD (mm) 895 x 1016 x 6 (PVC) on request: fixing onto a pedestal for temporary outdoor installation (SX 010) SL 102 V H 3 Standard pedestal (kit) size 2 (900 mm) SX 007 Higher pedestal flood type (kit) size 2 SX 032 (height 1125 mm) Pedestal for concrete mounting size 2 SX 016 Wall pedestal size 2 with coverplate SX 013 and 9 cable entries with stepped gasket for cable mm 2 Proposed accessories: for CDC Size 2 filling compound 3 x 95075, ground grid or ground grid with adjustment rods * Mounting depth in locking area Note: CDCs with busbar systems not being fully fitted with built-in units it is recommended to cover these empty spaces with a protection cover. For built-in units and protection-covers see page H3-41. H3-25

38 Cable Distribution Cabinets Size 2/Height 1355 Type Reference-No. Empty cabinet, double door SL 132 Cabinet with mounting plate, double door HxWxD (mm) 1245 x 988 x 6 (PVC) SL 132 P CDC with asymmetrical doors and mounting plate HxWxD (mm) 1245 x 988 x 6 (PVC) on request: fixing onto a pedestal for temporary outdoor installation (SX 010) SL 132 V Standard pedestal (kit) size 2 (900 mm) SX 007 Higher pedestal flood type (kit) size 2 SX 032 (height 1125 mm) Pedestal for concrete mounting size 2 SX 016 Wall pedestal size 2 with coverplate SX 013 and 9 cable entries with stepped gasket for cable mm 2 Proposed accessories: for CDC Size 2 filling compound 3 x 95075, ground grid or ground grid with adjustment rods * Mounting depth in locking area Note: CDCs with busbar systems not being fully fitted with built-in units it is recommended to cover these empty spaces with a protection cover. For built-in units and protection-covers see page H3-41. H3-26

39 Cable Distribution Cabinets Ordering example for Size 0/Height Built-in units maximum consisting of: 1xCabel distribution cabinet size 0 SK 080 GA with busbar-system 1xStandard pedestal SX 005 (kit) size 0 (900 mm) Example required space 1xHRC-fuse strip with disconnector, size 2 1 2xHRC-load fuse strip, size 2 EH 241 AAG 2 1xHRC-fuse strip, size 2 EH 212 CAB 1 1xHRC-load fuse strip, size 00 EH 041 CAD 0,5 1xHRC-fuse strip, size 00 EH 052 CAD 0,5 1xAdapter set with insulating protection Ordering example for Size 1/Height Built-in units maximum consisting of: 1xCabel distribution cabinet size 1 SK 081 GA with busbar-system 1xStandard pedestal SX 006 (kit) size 1 (900 mm) H 3 Example required space 1xHRC-fuse strip with disconnector, size 2 1 1xHRC-load fuse strip, size 2 EH 241 CAC 1 2xHRC-fuse strip, size 2 EH 212 CAB 1 2xHRC-load fuse strip, size 00 EH 041 CAD 1 1xAdapter set with insulating protection x HRC-fuse strip, size 00 EH 052 CAD 1 1xAdapter set with insulating protection Alternative combinations: The cable distribution cabinets can be equipped with all kind of built-in units. 1 built-in unit consits of: 1x HRC-fuse strip with disconnector, size 2 or 1 x HRC load fuse strip, size 2 or 1 x HRC fuse strip, size 2 or 2 x HRC load fuse strip, size 2 (Adapter set required) or 2 x HRC fuse strip, size 2 or or (Adapter set required) 1 x direct connection via srews, bolts and direct termination H3-27

40 Cabinets and Pillars HRC-Fuse Strips Type Reference-No. Type Reference-No. Size 3 Size 00 HRC-Fuse strips Size 3, 630 A V 1-pole switchable Screw connection M12 x 30 Incoming cover Material to fix on busbars EH 341 AAB HRC-Fuse strips Size 00, 160 A V 1-polig schaltbar Screw connection M8 x 20 Incoming cover Connection material EH 041 AAC* HRC Load Fuse strips Size 3, 630 A V 3-polig schaltbar Screw connectionm12 x 30 Incoming cover Material to fix on busbars EH 343 AAB HRC-Fuse strips EH 041 CAD* Size 00, V 1-pole switchable Steel frame V-shaped direct terminals 10-95mm 2, se Incoming cover Connection material Size 1 and 2 HRC Load Fuse strips Size 2, 400 A V 1-pole switchable Screw connection M12 x 35 Incoming cover Material to fix on busbars EH 241 AAG HRC Load Fuse strips EH 241 CAC Size 2, 400 A V 1-pole switchable V-direct terminals mm 2, se Incoming cover Material to fix on busbars HRC Load Fuse strips Size 2, 400 A V 3-pole switchable Screw connection M12 x 30 Incoming cover Material to fix on busbars EH 243 AAB HRC-Fuse strips EH 212 CAB Size 2, 400 A V V-direct terminals mm 2, se Incoming cover, fuse link cover Material to fix on busbars with body cover EH 232 CAB HRC-Fuse strips EH 052 AAC* Size 00, 160 A V Screw connection M8 x 20 Incoming cover, fuse link cover Connection material HRC-Fuse strips EH 052 CAD* Size 00, 160 A V Steel frame V-shaped direct terminals 10-95mm 2, se Incoming cover, fuse link cover Connection material * Adapter set required for mounting Required for HRC-Fuse strips, size 00 Adapter set with insulated protection cover to fit on the space of a built-in unit load fuse strip size 2, a built-in unit of 2 load fuse strips size 00 with steel frame V-clamps mm 2 Al/Cu (for PEN) with screw connection M8 x 20 (for PEN) Shroud above busbars asymmetric H x B (mm) 500 x 150 symmetric H x B (mm) 560 x 102 HRC fuse strips may only be used by authorized technicians or electrotechnically instructed persons. Locked doors are required for distribution cabinets. H3-28

41 Cabinets and Pillars Connections Type Reference-No. Direct termination for aluminium and cooper conductors with mounting screw M12x55 (1pcs) scope of termination: 50 mm 2,re mm 2,rm mm 2,se mm 2,sm Direct termination for aluminium and cooper conductors with mounting screw M12x55 (1pcs) scope of termination: 2x 50 mm 2,re 2x mm 2,rm 2x mm 2,se 2x mm 2,sm Direct termination Steelframe-V-terminal for Al- and Cu conductors with V-shaped contact-flags and connecting screws scope of termination: mm 2,re mm 2,rm mm 2,se mm 2,sm H 3 Shroud above busbars for direct terminations H x W (mm) 750 x 100 The feeding can also be realized through NH00 and Nh2 fuse strips. H3-29

42

43 Distribution cabinets for festival events and market places Distribution pillars round design RONDO mobil Socket outlet combinations Mobile distribution cabinets Build-in units and accessories H 3 Power supplies at festival- and marketplaces are always in the focus of the public. Connections have to be safe and well covered to assure that everything stays uninterrupted. In addition to safety and functionallity at all weather conditions also the optical addaption to the surrounding is an important issue. Distribution cabinets and pillars with festivalpedestals from Geyer are used for marketstands, roundabouts, festivaltents etc., always there where you require a safe plug and socket connection for an outdoor application. The large variety of sizes and designs allows an ideal selection for all applications; solid as well as mobile like the inovative RONDOmobile. H3-31

44 Distribution cabinets for festival events and market places Advantages Flexible and all purpose usable by modular construction Up-to-date modern look. Award achieved for excellent industrial design Cable entry also with closed door possible Various fit-in types by pre-equipped modules RONDO is available as mobile or fixed versions. RONDOmobile the pillar will be placed over the elektrant and fixed with 4 undetachable screws. The equipment can be choosen individually. RONDO won the industrie award for excellent design. The elektrant is an ironcase pedestal. Closed elektrant, flush mounted with the ground. Opend elektrant, the RONDOmobile pillar can be fixed above. Easily. Safe. Perfect. RONDOmobile RONDO also for main supply units H3-32

45 Distribution cabinets for festival events and market places Generally Regulations DIV VDE 0100 part 722 is regulating the installation for mobile buildings, mobile booth caravans e.g. Distribution cabinets SL 135 A (fixed version) round design Technical specifications: protection degree IP44 glasfiber reinforced polyester FS DIN with recyclat Colour: similar to RAL 7035 (spotted) Dimensions: Height 1350mm / Diameter 360mm Locking: Single locking; profile cylinder factory fitted. Pedestal: Cabinet and pedestal are one unit. For ground grid with earth connection and adjustment roods see accessories page H3-44. Basement To reduce condensation water inside the cabinet it is recomendet to fill the pedestal up the height of the cable support bar angle iron with a filling compound. The filling compound (25l plastic bag Reference-No ; see page H3-44) should be filled in approx mm Required qty. 1 bag Applications Distribution cabinets and pillars with festival-pedestals from GEYER are used for marketstands, roundabouts, festivaltents etc., always there where you require a safe plug and socket connection for an outdoor application. Distribution cabinets for temporary outdoor installation Technical specifications: protection degree IP43 / IP44 on request glasfiber reinforced polyester FS DIN Cabinets according to DIN EN with door-stops Colour: simmilar to RAL 7035 (spotted) Dimensions: DIN size 0/1005 H x W x D 1005 x 585 x 315 (mm) DIN size 1/1005 H x W x D 1005 x 780 x 315 (mm) DIN size 2/1005 H x W x D 1005 x 1110 x 315 (mm) Locking system: Three point locking system suitable for one or two cylinders; 1 profile cylinder factory fitted Festival-pedestal It is possible to connect the outgoing cables without removing the plug. Cables up to 42mm can be brought outside throug an flexible opening in the predestal even when the door is closed. The cable support bar angle iron fixed below theese openings allows a propper fixing of the outgoing cables. Fittings: Socket outlet combinations allow an individual adjustment to changing requirements. They can be combined with fuse rails and metering units. Socket outlet combinations and metering rails are with there fixing and connections according to DIN If there are empty spaces between build in unite these have to be covered. For shrouds above the busbar see page H3-40. H 3 RONDOmobile Technical specifications: protection degree IP44 glasfiber reinforced polyester FS DIN with recyclat Colour: simmilar to RAL 7035 (spotted) Dimensions: Height 904mm / Diameter 360mm Locking: Single locking; profile cylinder factory fitted. Pedestal / Elektrant Cast iron predestal with coverplate H xwxd 310x420x315(mm) With stainless steel bolts and nuts for fitting the cabinet Weight 28,5 Kg Basement To reduce condensation water inside the cabinet it is recomended to fill the pedestal up the height of the cable support bar angle iron with a filling compound. The filling compound (25l plastic bag Reference-No ; see page H3-44) should be filled in approx mm. Required qty. 1 bag Applications Where ever you require a temporary outdoor power supply Distribution cabinets for temporary outdoor installation (fixed version) Pedestal: with cable support bar angle iron 40 x 40 x 3 mm for fixing clamps. Cast iron base plate with rods to adjust the pedestal on the base plate (see accessories page H3-44) Basement To reduce condensation water inside the cabinet it is recomendet to fill the pedestal up the height of the cable support bar angle iron with a filling compound. The filling compound (25l plastic bag Reference-No ; see page H3-44) should be filled in approx mm. Distribution cabinets (mobile version) Pedestal: The festival-pedestal is combined with a steel-frame construction ( 25mm, painted) to enable a stand allone H3-33

46 Distribution cabinets for festival events and market places Distribution cabinets (fixed version) round design type 135 Type Reference-No. Round pillar with plug-in door and cutout for socket outlet cable for socket outlet combinations SL 135 A approx. 600 RONDOmobil Type Reference-No. Round pillar with plug-in door and cutout for socket outlet cable for socket outlet combinations with IP67 socket and cable with connecting cable 5x16mm 2 and plug 5-pole 63A IP67 for power supply SF 135 M Round pillar with plug-in door for socket outlet combinations and cutout for socket outlet cable with mounting plate for socket outlet combination, but without IP67 socket SF 135 L Pedestal / Elektrant SX 135 Cast iron predestal with coverplate H x W x D 310 x 420 x 315 (mm) With stainless steel bolts and nuts for fitting the cabinet SF135M and socket 5-pole 63A IP67 for power supply Pedestal / Elektrant empty, without plug SX 135 L H3-34

47 Distribution cabinets for festival events and market places Socket outlet combination for RONDO pillar Type Reference-No. Type Reference-No. with 1 CEE-socket 16 A, 5-pole and 2 Schuko -socket outlets 16 A consisting of: 1 x CEE-Socket outlet 16 A, 5p, 400 V 2 x Schuko-socket 16 A, 250 V 1 x MCB 16 A, 3p-C 2 x MCB 16 A, 1p-B 1 x RCD-40/4/0,03 A Cable flange 1 x M25 top 1 x M25 bottom (without glands) with 1 CEE-socket 32 A, 5-pole and 2 Schuko -socket outlets, 16 A consisting of: 1 x CEE-Socket outlet 32 A, 5p, 400 V 2 x Schuko-socket 32 A, 250 V 1 x MCB 16 A, 3p-C 2 x MCB16 A, 1p-B 1 x RCD-40/4/0,03 A Cable flange 1 x M25 top 1 x M25 bottom (without glands) Mounting plate for socket outlet combination (Fixing material included) SY 15 Z SY 16 Z SY 19 M with 4 Schuko -socket outlets 16 A consisting of: 4 x Schuko-socket 16 A, 250 V 4 x MCB 16 A, 1p-B 1 x RCD-40/4/0,03 A Cable flange 1 x M25 top 1 x M25 bottom (without glands) with 1 CEE-socket 16 A, 5-pole and 1 CEE-Socket outlet 32 A, 5-pole consisting of: 1 x CEE-Socket outlet 32 A, 5p, 400 V 1 x CEE-Socket outlet 16 A, 5p, 400 V 1 x MCB 32 A, 3p-C 1 x MCB 16 A, 3p-C 1 x RCD 40/0,03-4p Cable flange 1 x M25 top 1 x M25 bottom (without glands) with 2 CEE-socket 32 A, 5-pole consisting of: 2 x CEE-Socket outlet 32 A, 5p, 400 V 2 x MCB 32 A, 3p-C 1 x RCD 40/0,03-4p Cable flange 1 x M25 top 1 x M25 bottom (without glands) SY 17 Z SY 18 Z SY 19 Z H = H3-35

48 Distribution cabinets for festival events and market places Size 0 / Height 1005 Type Reference-No. Distribution cabinets for temporary outdoor installation max. depth behind locking system Festival-cabinet single door with busbar system 5-pole E-Cu 30 x 6 mm, insolated max. 5 build-in units SF 100 A Festival-pedestal SX 008 size 0 with 4 cable outlets Cover for cable outlet Festival-pedestal for concrete mounting size 0 with 4 cable outlets SX 020 F Cover for cable outlet Distribution cabinets for temporary outdoor installation (mobile version) max. depth behind locking system Festival-cabinet with stand single door with busbar system 5-pole E-Cu 30x6mm, insolated max. 5 build-in units with 4 cable outlets SF 100 B When socket outlet combinations are mounted inside of cable distribution cabinets and pillars to which non-authorised people have access, the panel builder has to secure the assembly against direct touch of live parts. According to DIN VDE 0100, part 729, clause 3.3. and DIN VDE 0660, part 504/EN The fixing- and connecting points of the build-in units are simmilar to a fuse rail size 2 according DIN Special build-in units or other variations of festival-cabinets /-pedestals on request H3-36

49 Distribution cabinets for festival events and market places Size 1/ Height 1005 Type Reference-No. Distribution cabinets for temporary outdoor installation max. depth behind locking system Festival-cabinet single door with busbar system 5-pole E-Cu 30x6mm, insolated max. 7 build-in units SF 101 A Festival-pedestal SX 009 size 1 with 6 cable outlets Cover for cable outlet Festival-pedestal for concrete mounting size 1 with 6 cable outlets SX 021 F H 3 Cover for cable outlet Distribution cabinets for temporary outdoor installation (mobile version) max. depth behind locking system Festival-cabinet with stand single door with busbar system 5-pole E-Cu 30x6mm, insolated max. 7 build-in units with 6 cable outlets SF 101 B When socket outlet combinations are mounted inside of cable distribution cabinets and pillars to which non-authorised people have access, the panel builder has to secure the assembly against direct touch of live parts. According to DIN VDE 0100, part 729, clause 3.3. and DIN VDE 0660, part 504/EN The fixing- and connecting points of the build-in units are simmilar to a fuse rail size 2 according DIN Special build-in units or other variations of festival-cabinets /-pedestals on request H3-37

50 Distribution cabinets for festival events and market places Size 2 / Height 1005 Type Reference-No. Distribution cabinets for temporary outdoor installation max. depth behind locking system Festival-cabinet double door with busbar system 5-pole E-Cu 30x6mm, insolated max. 10 build-in units SF 102 A Festival-pedestal SX 010 size 2 with 9 cable outlets Cover for cable outlet Festival-pedeatal for concrete mounting size 2 with 9 cable outlets SX 022 F Cover for cable outlet Distribution cabinets for temporary outdoor installation (mobile version) max. depth behind locking system Festival-cabinet with stand double door with busbar system 5-pole E-Cu 30x6mm, insolated max. 10 build-in units with 9 cable outlets SF 102 B When socket outlet combinations are mounted inside of cable distribution cabinets and pillars to which non-authorised people have access, the panel builder has to secure the assembly against direct touch of live parts. According to DIN VDE 0100, part 729, clause 3.3. and DIN VDE 0660, part 504/EN The fixing- and connecting points of the build-in units are simmilar to a fuse rail size 2 according DIN Special build-in units or other variations of festival-cabinets /-pedestals on request H3-38

51 Distribution cabinets for festival events and market places Ordering examples Ausführung Artikel-Nr. Equipped cabinets with 80 A meter panels Festival cabinet up to 100 A SF 102 BF8* consisting of: 1 x Cable distribution cabinet, size 2/1005 IP 44, 2 doors 1 x Main supply unit (K3) with wiring 25 mm 2 4 x Busbar-system 250 A 1 x Meter cover 450 mm, IP 54 1 x Wiring set 25 mm 2 from busbar to upper connection area 5 x Busbar-system E-CU 30 x 6 mm for max. 4 socket outlet combinations; empty busbar area has to be covered, see accessories Festival pedestal SX 010 Size 2 with 9 cable entries Cover for cable entry H 3 Festival pedestal Size 2 for ground mounting with 9 cable entries SX 022 F Equipped cabinets, size 0 5 built-in units maximum consisting of: 1x Festival-cabinet, size 0 SF 100 A 1 x Festival-pedestal, size 0 SX 008 required Example space 1x HRC-fuse strip with disconnector 1 1x Socket outlet comination with EH 001 L 1 2 CEE-sockets 32 A, 5-pole 1x Socket outlet comination with EH 004 L 1 4 CEE-sockets 16 A, 3-pole 1x Distribution unit EH 013 L 1 to be equipped individually 1x Insulating cover (for unused busbar) Alternative combinations: The festival cabinets can be equipped with all kind of built-in units. H3-39

52 Distribution cabinets for festival events and market places Built-in units and accessories Type Reference-No. Insulating cover above busbars symmetric holes H x W (mm) 560 x asymmetric holes H x W (mm) 500 x Feed-in Socket comination EH 021 LE with 1 CEE-socket 63 A 1 x Fuse socket D02, 3-pole 1 x CEE-socket 63 A, 5-pole Empty space for 1 DIN-rail meter (5 modules width) Fixing material H3-40

53 Distribution cabinets for festival events and market places Built-in units Socket outlet combination = 1 built-in unit (100 mm wide) Type Reference-No. Type Reference-No. Socket outlet combination with 2 CEE sockets 32 A, 5pole technical specification: 1 x Fuse socket D02, 3pole 1 x RCD 63 A/0,5 A 2 x MBC 32 A, B, 3pole 2 x CEE sockets 32 A, 5pole (fixing meterial included) Socket outlet combination with 2 CEE sockets 16 A, 5pole technical specification: 1 x Fuse socket D02, 3pole 1 x RCD 40 A/0,03 A 2 x MBC 16 A, B, 3pole 2 x CEE sockets 16 A, 5pole (fixing meterial included) Socket outlet combination with 1 CEE socket 63 A, 5pole technical specification: 1 x Fuse socket D02, 3pole 1 x RCD 63 A/0,03 A 1 x CEE sockets 63 A, 5pole (fixing meterial included) Attention: It is not possible to mount two EH 003 L next to each other. It is recommended to fix the EH 003 L in the outer positions. EH 001 L EH 002 L EH 003 L Distribution unit with 3 DIN-rails á 4,5 modules (1module = 18mm) technical specification: 1 x Fuse socket D02, 3pole 1 x Neutral terminal 14 x 10 mm x 16 mm 2 1 x Earth terminal 14 x 10 mm x 16 mm 2 incl. wiring from busbar system to fuse socket and earth-/neutral terminal H07V-K (fixing meterial included) Socket outlet combination with 1 CEE socket 32A, 5pole and 1 CEE socket 16A 3pole technical specification: 1 x CEE socket 32A 5pole 1 x CEE socket 16A 5pole 1 x Fuse socket D02, 3pole 1 x RCD 63A/0,03A 4pole 1 x MCB 32A, B, 3pole 1 x MCB 16A, B, 3pole (fixing meterial included) EH 013 L EH 014 L H 3 Socket outlet combination with 4 CEE socket 16 A, 3pole technical specification: 1 x Fuse socket D02, 3pole 1 x RCD 40 A/0,03 A 4 x MCB 16 A, B, 1pole 4 x CEE sockets 16 A, 3pole (fixing meterial included) Socket outlet combination with 4 sockets Schuko technical specification: 1 x Fuse socket D02, 3pole 1 x RCD 40 A/0,03 A 4 x MBC 16 A, B, 1pole 4 x sockets Schuko 16 A (fixing meterial included) EH 004 L EH 005 L Socket outlet combination with 1 CEE socket 32A, 5pole and 2 CEE socket 16A 3pole technical specification: 1 x CEE socket 32A 5pole 2 x CEE socket 16A 3pole 1 x Fuse socket D02, 3pole 1 x RCD 40A/0,03A 4pole 1 x MCB 32A, B, 3pole 2 x MCB 16A, B, 3pole (fixing meterial included) EH 015 L Socket outlet combination with 1 CEE socket 32 A, 5pole and 1 socket Schuko technical specification: 1 x Fuse socket D02, 3pole 1 x RCD 40 A/0,03 A 1 x MBC 16 A, C, 1pole 1 x MBC 32 A, C, 3pole 1 x CEE socket 32 A, 5pole 1 x socket Schuko 16 A (fixing meterial included) EH 012 L When socket outlet combinations are mounted inside of cable distribution cabinets and pillars to which non-authorised people have access, the panel builder has to secure the assembly against direct touch of live parts. According to DIN VDE 0100, part 729, clause 3.3. and DIN VDE 0660, part 504/EN The fixing- and connecting points of the build-in units are simmilar to a fuse rail size 2 according DIN Special build-in units or other variations of festival-cabinets /-pedestals on request H3-41

54 Distribution cabinets for festival events and market places Built-in units Type Reference-No. Type Reference-No. Socket outlet combination with 2 CEE sockets 16 A, 3pole technical specification: 1 x Fuse socket D02, 3pole 1 x RCD 40 A/0,03 A, 4pole 3 x MBC 16 A, B, 1pole 3 x Spare place for 1 module electronic meter 3 x CEE sockets 16 A, 3pole, lockable (fixing meterial included) EH 016 L Electronic meter 240 V 5 (25) A / 230 V non-certified, 1 module ER 001 U Electronic meter 240 V ER (20) A / 230 V certified, 1 module Socket outlet combination with 3 sockets Schuko 16 A for electronic meter technical specification: 1 x Fuse socket D02, 3pole 1 x RCD 40 A/0,03 A, 4pole 3 x MBC 16 A, B, 1pole 3 x Spare place for 1 module electronic meter 4 x sockets Schuko 16 A (fixing meterial included) EH 019 L Electronic meter 400 V 5 (65)A / 3 x 230 / 400 V non-certified, 5 modules ER 005 U Socket outlet combination with 1 CEE sockets 16 A, 5pole for electronic meter technical specification: 1 x Fuse socket D02, 3pole 1 x RCD 40 A/0,03 A, 4pole 1 x MBC 16 A, B, 3pole 1 x Spare place for 5 module electronic meter 1 x CEE sockets 16 A, 5pole, (fixing meterial included) EH 018 L Socket outlet combination with 1 CEE sockets 32 A, 5pole for electronic meter technical specification: 1 x Fuse socket D02, 3pole 1 x RCD 40 A/0,03 A, 4pole 1 x MBC 32A, C, 3pole 1 x Spare place for 5 module electronic meter 1 x CEE sockets 32 A, 5pole, (fixing meterial included) EH 017 L Socket outlet combination with 1 CEE sockets 63 A, 5pole for electronic meter technical specification: 1 x Fuse socket D02, 3pole 1 x RCD 63A/0,3 A, 4pole 1 x Spare place for 5 module electronic meter 1 x CEE sockets 63 A, 5pole, (fixing meterial included) Cable 5 x 10 mm2 (flexible) approx. 2,5 m EH 020 L * For electronic meters (1 module width) terminals marking without standardized norm. The combination EH 016 L and EH 019 L are wired for electronic meters. When socket outlet combinations are mounted inside of cable distribution cabinets and pillars to which non-authorised people have access, the panel builder has to secure the assembly against direct touch of live parts. According to DIN VDE 0100, part 729, clause 3.3. and DIN VDE 0660, part 504/EN The fixing- and connecting points of the build-in units are simmilar to a fuse rail size 2 according DIN Special build-in units or other variations of festival-cabinets /-pedestals on request H3-42

55 Spare parts and accessories Spare parts and accessories for cabinets and pillars Type Reference-No. Type Reference-No. Meter cover IP 54 sealable retrofit 375 mm without door SY 375 A 375 mm with door SY 375 AT Cable-end insulating set for crimped cables 10 mm 2 (7 pieces) DY A 450 mm without door SY 450 A 450 mm with door SY 450 AT Bag for wiring diagrams DIN A4 Cover for multi-rate tariff device IP 54 sealable retrofit 300 mm without door SY 300 A Heating 33 W thermostatically controlled Cover sealable, with cable-end insulation (for meterplate outlet) Blank piece RAL 9002 length 216 mm 1 set = 10 pieces Blank piece lockable DY A DY 69 X DY A Cover for temporary connection side opening 55mm of SL 152/155/157/ /202/205/207 Lighting fitting with switch and socket outlet "Schuko" for cabinets DIN size 00-2 Door stopper limitates the door opening at approx. 110 Main MCB E=Exact-Charakteristic, 25 ka acc. to DIN VDE 064 1,05...1,2. I n 20 A XHA A XHA A XHA A XHA A XHA A XHA A XHA A XHA A XHA199-4 H 3 Intermediate slider (e. g. when different tariffs) Seperation wall perforated for vertical seperation of different tariffgroups for mod. devices 68/85mm DY W DY W Main MCB with busbar adapter 3 x 1-pole E=Exact-Charakteristic, 25 ka acc. to DIN VDE 064 1,05...1,2. I n 25 A XKS A XKS A XKS A XKS A XKS363-4 Seperation wall for vertical seperation fixing on 2 DIN rails 230mm long usage in 300mm distribution area DY W Flanges see page H3-10. Terminals see page H5-4. H3-43

56 Spare parts and accessories Spare parts and accessories for cabinets and pillars Type Reference-No. Type Reference-No. lock lid locking cylinder dummy insert, black or blank locking grey lock handle lock housing locking cylinder with two keys Double locking complete (without locking cylinder) Filling compound Plastic bag with 25 l absorber stones. To reduce condensation water inside of the cabinet. Type of cabinet 115, 135, 142, 1 bag 152, 153, , 172, 173, 202 size 00, size 0 2 bags 155, 175, 176, 205 size 1, size 2 3 bags 157, 177, 207 The filling height should be approximately mm required quantity Locking devices Half cylinder with 2 keys Spare part Only the key Ground grid for polyester pedestals with screw M 10 for earth connection with 2 clamping straps for cable distribution cabinets CDC size CDC size CDC size CDC size for pillars Type Type 115/135/ 152/172/ Type 155/175/ Type 157/177/207 Ground grid for polyester pedestals with screw M 10 for earth connection with 2 clamping straps with adjustment roots for cable distribution cabinets CDC size CDC size CDC size CDC size for pillars Type Type 115/135/ 152/172/ Type 155/175/ Type 157/177/ H3-44

57 CONTENTS PAGE CONSUMER SUPPLY TECHNOLOGY Surface mounting connection boxes 3 7 Technical information 4 Wall mounted connection boxes 5 House connection boxes 5 7 Technical information 4 for small supplies 5 K3, K4, K12 6 Accessories 7 House connection and main supply units 8 11 Technical information 4 Size 0, 1, Built-in units 10 Connections 11 H 4 H4-1

58

59 Main Junction Boxes/Main supply units Wall mounted connection boxes Main supply units - For small supplies DIII, IP 40 - For small supplies DII, NH00 IP 54 Main supply units KH00 acc. to DIN Type K3, K4, K12 Distribution cabinets with wall mounting pedestal Accessories H 4 The progressive main supply units K3, K4 and K12 are produced to keep them as enviromental protective as possible. This is achieved by adding recyclat into the molding process. As a matter of course all the products containing recyclat are in accordance with the electromechanical and physical requirements. Quite often the required DIN standards are far exeeded with these products. Features: Energy takeover from power supply net to the consumer unit Protection degree IP 54 for all types K3, K4 und K12 Main supply units are seperated into categories in response to the feeding current - up to 100A with NH00 fuse bases - up to 160A with NH1 fuse bases - up to 250A with NH2 fuse bases Main supply units are the link between the utility network and the domestic installation. H4-3

60 Main supply units Technical information Main supply units For small supplies DIII Technical specification: protection degree IP40 closed baseplate with markings for rear cable supply Material housing and baseplate made of plasitic Housing sealable For small supplies DII, NH00 Technical specification degree IP54 Material glasfiber-reinforced polyester Typ 803 Usage: multi circuit boxes 2x3NH00 (I D =50A) multi circuit boxes 3x3NH00 (I D =63A) Housing sealable Size K3/K4 Technical specification: DIN VDE protection degree IP40 DIN Supply via membrane inlet. Outgoings via stepped twist nipples, at the left and right side wall Pg36 knockouts are available. The cover can be replaced in a 15 possition. Material glasfiber-reinforced polyester Typ 803 acc. to DIN Housing sealable Inner protection cover GEYER-safety-cover which is turned down after commisioning stays in the unit and is used as protection cover. For outdoor applications please use rain-roof Size K12 Technical specification: DIN VDE protection degree IP40 DIN Supply and outgoings via removable, stepped seals. Additional sliders can be fitted either in the left or right side wall. The cover can be replaced ina 15 possition. House connection and main supply units - Distribution cabinets with wall mounting pedestal Versions: Busbar-system E-Cu 30 x 6 mm Ground plate with entry glands mm 2 C-shaped cable support bar. On request cover available for wall pedestal. (Not recommended for outdoor) Material: Cabinets: fibreglass reinforced polyester type FS 833,5 acc. to DIN Wall pedestal: Sheet steel 2,5 mm hot dip galvanized Colour: RAL 7035, grey Protection degree: IP 43, on request IP 44 Dimensions: please see different versions Locking: 3-point locking system for 1 or 2 cylinders suitable. - Built-in units HRC-fuse strip HRC-load fuse strip Generally DIN , Form B, acc. to VDE 0636, part 21 Body made of fibreglass reinforced polyester Non-tracking and leakage current approved Silver contacts with duplex springs Tin coated copper bars HRC-fuse strip, size 00, 160 A V insulated body for busbar in between distance 185 mm H x W x D (mm) 634 x 49 x 113 HRC-load fuse strip, size 00, 160 A V 1-pole switchable for busbar in between distance 185 mm H x W x D (mm) 665 x 49 x 151 Deion contact quencher chamber HRC-fuse strip, size 2, 400 A V insulated body H x W x D (mm) 645 x 99 x 151 Proper for voltage transformer and temporary fuse links Cover for busbar connection area HRC-load fuse strip, size 2, 400 A V 1-pole or 3-pole switchable H x W x D (mm) 655 x 99 x 151 Proper for voltage transformer and temporary fuse links Deion contact quencher chamber Material glasfiber-reinforced polyester Typ 803 acc. to DIN Housing sealable H4-4

61 Main supply units Wall mounted connection boxes Type Reference-No. Protection degree: IP 54 Material: reinforced plastic Type 84 Terminals: stellframe terminals with terminals mm 2 Incoming and outgoing with Pg 36/29 4-pole incoming: mm 2 Copper outgoing: mm 2 Copper, PE/N 2 x mm 2 Copper H x W x D (mm) 235 x 180 x 110 LA 450 GA1 Main supply units Type Dimensions H x W x D (mm) Reference No. For small supplies DIII, IP 40 with DIII-fuse socket 6-25 mm 2 clamp terminals 3x63 A 158 x 220 x 115 HM 532 For small supplies DII, NH00 IP 54 with DII-fuse socket H 4 3x25 A 160 x 180 x 100 HW 231 Feeding: clamp terminal 4-16 mm 2, Pg 21 Outgoing: clamp terminal 4-16 mm 2, Pg 21 with fuse-bases 1x3NH x 180 x 110 HW 334 Feeding: terminals mm 2, Pg 36/29 Outgoing: terminals mm 2, Pg 29 1x3NH x 235 x 110 HW 434 Feeding: terminals mm 2, Pg 36/29 Outgoing: terminals mm 2, Pg 29 H4-5

62 Main supply units Main supply units KH00 acc. to DIN Type Reference No. 1 incoming Reference No. 2 incoming Size K3 armament feeding outgoing outgoing I D + PEN Al/Cu (mm 2 ) Al/Cu (mm 2 ) Pg (A) 1x3 NH stepped 100 HK 334 C twist nipple Size K4 armament feeding outgoing outgoing I D + PEN Al/Cu (mm 2 ) Al/Cu (mm 2 ) Pg (A) 1x3 NH00 2 x stepped 100 HS 434 C twist nipple with rain-roof armament feeding outgoing outgoing I D + PEN Al/Cu (mm 2 ) Al/Cu (mm 2 ) Pg (A) 1x3 NH stepped 100 HK 434 C twist nipple with rain-roof and locking mechanism for cylinder lock armament feeding outgoing outgoing I D + PEN Al/Cu (mm 2 ) Al/Cu (mm 2 ) Pg (A) 1x3 NH stepped 100 HK 434 CA twist nipple twist nipple 10 50mm 2 Size K12 Enclosed area seperated by internal shroud armament feeding outgoing I D + PEN Al/Cu Al/Cu (A) V-terminal (mm 2 ) 2x3 NH x100 A HK 864 C HS 864 C 1x3 NH2/ A HK 837 C HS 837 C H4-6

63 Flush mounting frame for main supply unit Accessories Type Flush mounting frame with plug-in door, blind frame adjustable approx. 10 mm to compensate height of plaster, flush mounting frame made of steel incl. fixing screws for main supply unit. for outer walls: steelframe hot-dip galvanised, steel powder coated white RAL 9010 blind frame and door made of aluminium The locking of the plug-in door is with a turning bolt mechanism (8 mm square bolt with slot and rain protection). On request also possibel with cylinder lock or individual customer locking systems. adequate for main supply unit Niche Outer frame Reference No. H x Wx D (mm) Size H x W x D(mm) Wall frame 415 x 245 x x 244 x x 410 x 190 K3 K4 K x 360 x x 360 x x 470 x 200 HxW (mm) 615 x x x 500 outer wall HR 044 HR 044 HR 064 Wall enclosure with locking system for profile cylinder 415 x 245 x x 244 x 144 K3 K4 555 x 360 x x 360 x x x 420 HR 074 A HR 074 A Euro profile cylinder two keys included Profile cylinder inner square 8 mm Key inner square 8 mm for operating the turning bolt large design (length approx. 80 mm) H 4 H4-7

64 House connection and main supply units Size 0/Height door Type Reference No.. Distribution cabinets with wall mounting pedestal Cabinet with busbar system E-Cu 30 x 6 mm (4-wire) Max. 5 built-in units SK 100 GA Max. inner depth in locking area Wall mounting pedestal size 0 SX 011 with cover plate 4 x Cable entries with stepped glands for cable mm 2 Size 1/Height door Type Reference No.. Distribution cabinets with wall mounting pedestal Max. inner depth in locking area Cabinet with busbar system E-Cu 30 x 6 mm (4-wire) Max. 7 built-in units SK 101 GA Wall mounting pedestal size 1 SX 012 with cover plate 6 x Cable entries with stepped glands for cable mm 2 Note: Unused busbar areas have to be covered. Insulating covers, please see page H4-11. HRC-fuse strips, please see page H4-10. H4-8

65 House connection and main supply units Size 2/Height door Type Reference No.. Distribution cabinets with wall mounting pedestal Cabinet with busbar system E-Cu 30 x 8 mm (4-wire) Max. 10 built-in units SK 102 GA Max. inner depth in locking area Wall mounting pedestal size 2 SX 013 with cover plate 9 x Cable entries with stepped glands for cable mm 2 H 4 Note: Unused busbar areas have to be covered. Insulating covers, please see page H4-11. HRC-fuse strips, please see page H4-10. H4-9

66 House connection and main supply units HRC-Fuse Strips Type Reference-No. Type Reference-No. Size 3 Size 00 HRC-Fuse strips Size 3, 630 A V 1-pole switchable Screw connection M12 x 30 Incoming cover Material to fix on busbars EH 341 AAB HRC-Fuse strips Size 00, 160 A V 1-polig schaltbar Screw connection M8 x 20 Incoming cover Connection material EH 041 AAC* HRC Load Fuse strips Size 3, 630 A V 3-polig schaltbar Screw connectionm12 x 30 Incoming cover Material to fix on busbars EH 343 AAB HRC-Fuse strips EH 041 CAD* Size 00, V 1-pole switchable Steel frame V-shaped direct terminals 10-95mm 2, se Incoming cover Connection material Size 1 and 2 HRC Load Fuse strips Size 2, 400 A V 1-pole switchable Screw connection M12 x 35 Incoming cover Material to fix on busbars EH 241 AAG HRC Load Fuse strips EH 241 CAC Size 2, 400 A V 1-pole switchable V-direct terminals mm 2, se Incoming cover Material to fix on busbars HRC Load Fuse strips Size 2, 400 A V 3-pole switchable Screw connection M12 x 30 Incoming cover Material to fix on busbars EH 243 AAB HRC-Fuse strips EH 212 CAB Size 2, 400 A V V-direct terminals mm 2, se Incoming cover, fuse link cover Material to fix on busbars with body cover EH 232 CAB HRC-Fuse strips EH 052 AAC* Size 00, 160 A V Screw connection M8 x 20 Incoming cover, fuse link cover Connection material HRC-Fuse strips EH 052 CAD* Size 00, 160 A V Steel frame V-shaped direct terminals 10-95mm 2, se Incoming cover, fuse link cover Connection material * Adapter set required for mounting Required for HRC-Fuse strips, size 00 Adapter set with insulated protection cover to fit on the space of a built-in unit load fuse strip size 2, a built-in unit of 2 load fuse strips size 00 with steel frame V-clamps mm 2 Al/Cu (for PEN) with screw connection M8 x 20 (for PEN) Shroud above busbars asymmetric H x B (mm) 500 x 150 symmetric H x B (mm) 560 x 102 HRC fuse strips may only be used by authorized technicians or electrotechnically instructed persons. Locked doors are required for distribution cabinets. H4-10

67 House connection and main supply units Connections Type Reference-No. Direct termination for aluminium and cooper conductors with mounting screw M12x55 (1pcs) scope of termination: 50 mm 2,re mm 2,rm mm 2,se mm 2,sm Direct termination for aluminium and cooper conductors with mounting screw M12x55 (1pcs) scope of termination: 2x 50 mm 2,re 2x mm 2,rm 2x mm 2,se 2x mm 2,sm Direct termination Steelframe-V-terminal for Al- and Cu conductors with V-shaped contact-flags and connecting screws scope of termination: mm 2,re mm 2,rm mm 2,se mm 2,sm Shroud above busbars for direct terminations H x W (mm) 750 x 100 H 4 H4-11

68

69

70 /1/10/11 Heime (Tianjin) Electrical Enginnering s Co.,Ltd. 海默 ( 天津 ) 电气工程系统有限公司 174 Jintang Rd, Hedong, Tianjin, 天津市津塘路 174 号 Phone: +(86) 22 / , Fax: +(86) 22 / Mail: info@heime electric.com, electric.com