Adak Behin Niroo. co.com

Transcription

1 Adak Behin Niroo co.com

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21 PRODUCTS LOW VOLTAGE SWITCHGEARS MEDIUM VOLTAGE SWITCHGEARS

22 PRODUCTS LOW VOLTAGE SWITCHGEARS

23

24 co.com High Standard Type Tested Know How Image & Resources SIVACON TECHNOLOGY High Flexibility Close Customer Contact Regional Experience PROXIMITY TO THE COSTUMER WORLD TRADE NAME

25 co.com The key features of SIVACON 8PT o Short circuit capability Ipk to 375 ka o Optional cable entry from top or bottom o Modular design of device compartments o Generous device unit depth for multipurpose installation o Type tested standard modules (TTA) from Siemens o 3 and 4 pole busbar system up to 7400 A o Uniform busbar position at the top of the unit o Models available using withdrawable, plug in & fixed technology o Single fronted or double fronted layout

26 co.com rear panel 2 mm frame partition sheet (inside) 2 mm side panel 2 mm door 25 mm Surface treatment: Material: Degrees of protection to IEC 60529: optionally powder coated, wet painted or galvanized sheet steel in the following thicknesses: Frame: 2.5 mm Enclosure: 2.0 mm IP 30, IP 40, IP 42 Ventilated IP 40, IP 54 Unventilated

27 co.com BUSBAR SYSTEM TYPES BUSBAR ON TOP BUSBAR AT REAR

28 co.com SIVACON for all Applications in the Low Voltage Network A A B C B Applicable as current classes A: Power Center 7400A B: Main Distribution Board 4000A C: Sub distribution Board 3200A Motor Control Center Process Automation Applicable as current classes A: Main Distribution Board 3200A B: Sub distribution Board 1250A

29 co.com Functions: Incoming, outgoing feeders and couplings FCB - Current range from 630A to 6300A - Cubicle width: 600, 800, 1000, 1200mm - Degrees of Protection: IP42 IP54 - Internal separation: 1, 3a, (2b, 4b for FCB1) - Equipped with withdrawable or fixed mounted ACB - Reliable travel of the circuit breaker while the door is closed - Cable/busbar connection optionally - from above or below

30 co.com Functions: Outgoing feeders in fixed mounted design OFF 1 4 Any combination of modular cable feeders Easy replacement of cable feeders after deenergizing the switchboard Devices are connected without the need for drilling or punching Easily accessible connections for quick

31 co.com Vertical distribution busbar & modular cable feeders Current range: up to 630A / feeder Internal separation: 1 4b Rated current vertical busbar: 1400A Max. busbar size: 2x40x10 Cable connection compartment at the right side in the cubicle Fused and non fused design No. of poles device: 3 & 4 pole

32 co.com Functions: Outgoing feeder fixed mounted design switchable fuse disconnectors Fuse switch disconnectors make for optimum packing density Rated current: 630A / feeder Vertical busbar system with rated current: 2800A Maximum busbar size: 2x100x10 Cubicle width: 600, 800, 1000mm Internal separation: 1, 2b High component density up to 25 plug in modules per cubicle (OFFD1, Horizontal connection) Cable connection compartment at the right side (OFFD1) & rear side (OFFD2) in the cubicle OFFD

33 co.com Functions: Outgoing Feeder Cubicles in In line Plug in Design OFPD Rated current: 630A / feeder Rated current vertical busbar: 2100A Busbar size: 1x80x10 (3 & 4 pole) Cubicle width: 1000, 1200mm Degrees of Protection: IP41 Internal separation: 1, 3b, 4b High component density up to 34 plug in modules per cubicle Cable connection compartment at the right side in the cubicle

34 co.com Functions: Motor feeders & outgoing cable feeders plugged in design OFPM Current range: outgoing cable feeders up to 630A / motor feeders up to 250KW Cubicle width: 1000mm Degrees of Protection: IP42 IP54 Internal separation: 2b, 4a High component density up to 22 plug in modules per cubicle Cable connection compartment at the right side in the cubicle Fused and non fused design

35 co.com Plug in bus system Integrated protection against electric shock safe to touch (IP20B) 3 and 4pole versions possible Tap openings in a modular grid of 25 mm Rated current up to 1200 A Short circuit strength I pk up to 163 ka I cw up to 65 ka, 1 s up to 50 ka, 3 s Lateral guides for a reliable plugging

36 Plug in units & cable connection Free assembly of devices or device combinations Free combination of plug in units in the cubicle Non fused motor feeders up to 11 kw in 75 mm module height up to 45 kw in 125 mm module height With and without current metering Instrument panel for measure and control devices directly in the door Cable connection for Power circuits: direct at the switching device Control circuit: at terminals 400 mm wide cable connection compartment

37 Functions: Motor control center in withdrawable unit design Motor and cable feeder up to 630 A (fused and non fused) Cubicle width: 600, 1000mm Degrees of Protection In connect pos.: IP42 IP54 In disconnect & test pos.: IP30 Internal separation: 3b, 4b Up to 17 withdrawable units Cable connection compartment at front or rear OFW Alteration of compartment size possible without having to shutdown the switchboard

38 DISCONNECTED POSITION 0 TEST D POSITION POSITION CONNECTED POSITION I

39 High safety optimum cable connection compartment Cable connection compartment at the rear with cable gland box High form of internal separation up to Form4 Type7 acc. to BS EN (gland box per functional unit) Vertical busbarsystem Integrated protection against electric shock, safe totouch (IP20B) 3 and 4 pole versions Tap openings in a modular grid of 25 mm Rated current up to 1200 A Short circuit strength I pk I cw up to 163 ka up to 65 ka, 1 s up to 50 ka, 3 s

40 Withdrawable units Standardised design in 8 module heights (100, 150, 200, 300, 400, 500, 600, 700mm) Motor feeders fuse less up to 11kW in 100mm module height only Control plugs up to 40 pole with bus contact optionally (PROFIBUS DP with Win SIMOCODE PRO V) Plenty of space for auxiliary equipment by possibility of fitting components at the rear

41 Withdrawable units Insertion support for easy moving of the withdrawable units > 250 A Control panel for measuring instruments and actuating devices directly on the withdrawable unit Simple conversion of with drawable compartments without shutdown of switchboar Lockable disconnected position for safe operating at the load

42 Functions: Reactive power compensation One controller module and one or more capacitor module(s) Cubicle width: 800mm Degrees of Protection: IP42 Internal separation: 1, 2b Non choked power factor correction unit 4RY up to 500KVAR per unit Choked power factor correction unit 4RF up to 300KVAR per unit PFC

43 Functions: Cubicle for customised solutions Various installation components Cubicle high doors or compartment doors Compartmentalization Vertical distribution busbar 3 and 4 pole Rated current up to 1200 A Rated peak withstand current I pk :up to 163 ka I cw :up to 65 ka CCS

44 Functions: Corner cubicle Corner Cubicle

45 Functions: Incoming, outgoing feeders and couplings Current range from 630A to 3200A Cubicle width: 400, 600, 800mm Degrees of Protection: IP41 IP54 Equipped with withdrawable or fixed mounted ACBs Reliable travel of the circuit breaker while the door is closed FCB

46 FCB Types FCB1 FCB1 FCB1 FCB1 BC L BC T

47 Functions: Outgoing feeders in fixed mounted design Rated current: up to 1400A Door with inspection window With door Cubicle width: 400, 1000mm Degrees of Protection: IP30, IP40 IP54 Equipped with fixed mounted design OFF

48 Functions: Outgoing feeder fixed mounted design switchable fuse disconnectors Rated current: 630A / feeder Vertical busbar system with rated current: 1560A Maximum busbar size: 1x60x10 Cubicle width: 600, 850mm Degrees of Protection: IP31, IP41 IP54 Fused design OFFD

49 Functions: Outgoing Feeder Cubicles in In line Plug in Design Rated current: 630A / feeder Vertical busbar system with rated current: 2100A Maximum busbar size: 1x80x10 Cubicle width: 1000, 1200mm Degrees of Protection: IP41 Fused design OFPD

50 SIGNED, SEALED & DELIVERED SAFETY Reference standard: IEC Verification of temperature rise limits by test Verification of dielectric properties by test Verification of the short circuit withstand strength by test Verification of the protective circuit Verification of clearances and creepage distances Verification of mechanical operation Verification of the degree of protection Verification of the glow test

51 Type Tested for the world s most onerous environments Glow Test According to IEC Internal Arc Containment Test According to IEC Earth quaked Tested Vibration Tested

52 Internal arc testing Special test to IEC (Report) or VDE 0660 Part 500, supplement 2 Arc strikes in circuit breaker panel Burning duration U = 690V + 5% Icw = 52KA tp = 310ms

53 Data acquisition sheets BUSBAR AT REAR BUSBAR ON TOP

54 Engineering, drawings & documentation

55 Quotation Generating, Order Engineering, Manufacturing, Assembling

56 PRODUCTS MEDIUM VOLTAGE SWITCHGEARS

57 PRODUCTS Medium Voltage Switchgears The ABN MV switchgear is a compact vacuum circuit breaker switchgear for the medium voltage range. ABN MV is developed primarily for substations, power plants and industrial electrical distribution where compact functionality, modern design, safety and durability are needed. In the versatile furnishing of the switchgear, components from the best manufacturers in the field are used. The MV product family s circuitbreakers are used as a main component. The cubicle structure, insulation and bushings are designed to enable customised technical and economical solutions.

58 PRODUCTS Medium Voltage Switchgears Due to its static and rigid frame, ABN MV is easy to move and transport even over longer distances. The rigid frame does not cause tension in the bus ducts or the switchgear connections. The switchgear is type tested and arc tested to IEC/EN standards. The unit s rated voltages are 7.2 kv, 12 kv, 24 kv, thermal short-circuit resistance 31.5 ka (3 sec) and rated current A. The switchgear is designed for safe use: all functions are performed behind closed doors, the breaker and earthing switch are mechanically locked together, and the function unit is equipped with blocking plates to prevent faulty operation.

59 THE ABN APPROACH Service and Expertise At ABN we remain close and in touch with our customers. For us, it is important to listen to the customer, to be flexible to their needs, and to be a reliable and responsible partner. Our operations are based on decades of experience in the field coupled with the enthusiasm and innovative creativity of new-generation expertise. We develop and manufacture all of our core products in-house. We continuously develop our operations to ensure we remain able to offer our customers ever more efficient, reliable and environmentally friendly products and solutions. CORPORATE RESPONSIBILITY Corporate responsibility is a vital part of our day-to-day operations. Our responsibility is grounded in law and integral to our values and strategy.

60 OPERATIONAL POLICY Quality The bedrock of our business The quality of our products and operations is based on consistent quality management throughout our organisation. Our operations are defined by our ISO 9001:2008 compliant quality system, and is annually audited by QA TECHNIC. In addition to quality system auditing, our production and products are also subject to annual quality assurance assessment by QA TECHNIC Ltd.