COPYRIGHT AND TRADEMARK INFORMATION

Transcription

1

2 COPYRIGHT AND TRADEMARK INFORMATION THIS ENTIRE CATALOG, COPY,PA RT NUMBERS AND UNIQUE METHOD OF SHOWCASING PRODUCTS IS COPYRIGHT 2006 INTERNATIONAL COMMERCIAL SUPPLY CORPORATION, LLC. ALL RIGHTS RESERVED. NO PORTION OF THIS CATALOG MAY BE REPRODUCED IN A N Y FORM OR BY A N Y MEANS, IN WHOLE OR IN PA RT, WITHOUT THE WRITTEN PERMISSION OF INTERNATIONAL COMMERICAL SUPPLY CORPORATION, LLC 2006 INTERNATIONAL COMMERCIAL SUPPLY CORPORATION, LLC IS A REGISTERED TRADEMARK OF INTERNATIONAL COMMERCIAL SUPPLY CORPORATION, LLC COVER PHOTOGRAPHS CONNECTICUT - GETTYIMAGES.COM NEVADA - GETTYIMAGES.COM LIMITED WARRANTY POLICY NO WARRANTY IS OFFERED TO CONSUMERS, AS DEFINED IN THE MAGNUSON-MOSS WARRANTY ACT.ALL ITEMS SOLD ARE INTENDED FOR RESALE, BUSINESS USE OR EQUIPMENT MANUFACTURE AND WARRANTED AGAINST DEFECTS IN WORKMANSHIP OR MATERIALS ONLY TO THE EXTENT OF THE WARRANTY SUPPLIED BY THE MANUFACTURER. EACH ITEM CARRIES THE FULL WARRANTY OF THE MANUFACTURER. INTERNATIONAL COMMERCIAL SUPPLY CORPORATION, LLC. ASSUMES NO OBLIGATION ON THE PA RT OF A N Y MANUFACTURER EXCEPT TO PROCESS W ARRANTY CLAIMS TO THE MANUFACTURER ON BEHALF OF OUR CUSTOMERS, INDIVIDUAL MANUFACTURER S W ARRANTY POLICIES WILL BE PROVIDED UPON REQUEST. ILLUSTRATIONS AND S ARE PROVIDED FOR IDENTIFICATION PURPOSES. WE TAKE NO RESPONSIBILITY THAT AN ITEM WILL SUIT A SPECIFIC PURPOSE. A N Y LIABILITY CLAIM WILL BE LIMITED TO T H E PURCHASE PRICE. IN CASE OF DAMAGE OR SHORTAGES IN TRANSIT VIA U.P.S. UPON DELIVERY OF SHIPMENT, MERCHANDISE SHOULD BE CAREFULLY INSPECTED BY YOU FOR DAMAGES/SHORTAGES DURING SHIPMENT. IF YOU RECEIVE DAMAGED ITEMS, PLEASE FOLLOW THE PROCEDURE BELOW: 1. HOLD THE FOLLOWING ITEMS AT THE ORIGINAL DESTINATION FOR INSPECTION BY U.P.S.: A. THE OUTSIDE CARTO N B. ALL INSIDE PACKING MATERIAL C. A N Y BROKEN A RTICLES 2. H AVE OUR SHIPPER NUMBER AND TRACING NUMBER LOCATED ON THE U.P.S. LABEL AVAILABLE FOR U.P.S. FROM CT SHIPPER #017055, FROM NV SHIPPER #8X CONTACT U.P.S. IN YOUR AREA TO REQUEST U.P.S. INSPECTION NO LATER THAN 24 HOURS OF RECEIPT OF PACKAGE. 4. O B TAIN AN LDI# (LOSS DAMAGE INSPECTION #) FROM U.P.S. AND REPORT IT TO US SO THAT A DAMAGE CLAIM MAY BE FILED. FOR ASSISTANCE FOR CARRIERS OTHER THAN U.P.S., CALL OR

3 TABLE OF CONTENTS INDEX - SPECIFIC USE ITEMS INDEX - MULTI-USE ITEMS i3 - i8 i9 - i15 BEVERAGE COFFEE MAKERS, DISPENSING EQUIPMENT SANITATION BOOSTERS, DISHWASHERS, GLASS WASHERS, WASTE DISPOSERS FRYERS, GREASE FILTERS, WATER COOKERS GRILLS CHAR BROILERS, GRIDDLES, HOT DOG MACHINES, SKILLETS, WAFFLE BAKER OVENS, RANGES, BROILERS PREPARATION BLENDERS, CAN OPENERS, CHOPPERS, CUTTERS, JUICERS, MIXERS, SHREDDERS, SLICERS STEAMERS BOILERS, COOKERS, KETTLES TOASTERS WARMERS CHEESE MELTERS, FOOD WARMERS, POPCORN MACHINES ELECTRICAL SUPPLIES SUPPLIES HARDWARE, SERVICE SUPPLIES PLUMBING SUPPLIES REFRIGERATION THERMOMETERS, GAUGES TOOLS, CHEMICALS, LUBRICANTS TECHNICAL INFORMATION FUNCTIONAL REPLACEMENT CROSS REFERENCE NUMBER TO PAGE INDEX FORMS CUSTOM KET, CUSTOM SHELF, ORDER, CREDIT APPLICATION, PASSWORD REQUEST i1

4 SALES POLICY 1. POSSESSION OF THIS CATALOG DOES NOT OBLIGATE US TO ACCEPT A PURCHASE ORDER OR CONSTITUTE AN OFFER TO SELL. THIS CATALOG IS INTENDED FOR USE BY THE SERVICE TRADE. 2. MINIMUM ORDER IS $ CHARGE ACCOUNTS MAY BE ESTABLISHED BY REQUESTING A CREDIT APPLICATION. CUSTOMERS WITHOUT APPROVED CREDIT MAY ARRANGE FOR PAYMENT WITH A CREDIT CARD, CHECK IN A D VANCE OR PAYMENT UPON DELIVERY. 4. A SIGNED RESALE CERTIFICATE OR TAX EXEMPT CERTIFICATE MUST BE PROVIDED OR APPLICABLE SALES TAXES MAY BE CHARGED. CUSTOMERS ARE RESPONSIBLE FOR ALL LOCAL, COUNTY, STATE OR FEDERAL TAXES DUE. 5. SHIPPING, HANDLING AND INSURANCE COSTS ARE PAYABLE BY THE CUSTOMER. 6. MANUFACTURERS PART NUMBERS ARE LISTED ONLY AS A GUIDE AND A R E NOT INTENDED TO IMPLY THAT THE ITEMS WE SUPPLY WERE PURCHASED FROM OR MADE FOR A PARTICULAR MANUFACTURER. ALL PART NUMBERS SHOWN ARE FOR IDENTIFICATION AND REFERENCE PURPOSES ONLY. MANUFACTURERS PART NUMBERS LISTED REPRESENT AN ACCUMULATION OF INFORMATION WE HAVE COMPILED FROM TRADE PUBLICATIONS, OTHER DISTRIBUTORS, CUSTOMERS AND OUR OWN INVESTIGATION. A LTHOUGH WE H AVE ATTEMPTED TO VERIFY THE ACCURACY OF THE INFORMATION, WE CANNOT GUARANTEE THAT THE CONTENTS ARE CORRECT. 7. RETURNED GOODS WILL NOT BE ACCEPTED UNLESS PRIOR APPROVAL IS ISSUED BY US AND MAY BE SUBJECT TO A REING FEE. SPECIAL ORDERS ARE NOT RETURNABLE. WE ACCEPT THESE CREDIT CARDS: i2

5 International Commercial Supply Corporation, LLC P.O. Box 999 * 200 International Way * Winchester Business Park Winsted, Connecticut * (Fax) ICS@ICSCPA RTS.COM ORDER FORM PLEASE TYPE OR PRINT NEATLY Date: Ship Via: Bil To: Ship To: Your Cust Purchase Order Number Your Phone Number Your Name Comment: Qty Part Number Description Ea Price Ext Price 932

6 HOURS OF OPERATION PHONE: FAX: EASTERN AND CENTRAL TIME ZONE: SERVED BY WINSTED, CT. SALES AND DISTRIBUTION CENTER. MONDAY THRU FRIDAY 8:00 AM - 5:45 PM EASTERN TIME. (NOTE: FOR EMERGENCY ORDERS BETWEEN 5:45-7:00 PM EASTERN TIME, CONTACT OUR LAS VE FACILITY AT ) MOUNTAIN AND PACIFIC TIME ZONE: SERVED BY LAS VE, NV. SALES AND DISTRIBUTION CENTER. MONDAY THRU FRIDAY 7:00 AM - 4:30 PM PACIFIC TIME.

7 International Commercial Supply Corporation, LLC P.O. Box 999 * 200 International Way * Winchester Business Park Winsted, Connecticut * (Fax) ICS@ICSCPA RTS.COM Date: Company: Address: CREDIT APPLICATION PLEASE TYPE OR PRINT NEATLY City,State,Zip: Phone: ( ) Type Of Business: Date Business W as Established: Fax: ( ) Name Of Person Authorized ToApprove Purchases And Payments: Estimated YearlyDollar Amount To Be Purchased: TRADE REFERENCES 1. City,St,Zip: 2. City,St,Zip: WEBSITE: ACCOUNT NAME ADDRESS FAX # City,St,Zip: City,St,Zip: BANK REFERENCE(S) ACCOUNT NAME ADDRESS PHONE FAX # City,St,Zip: The information provided in this application is true and accurate. I authorize the bank named herein as reference to reveal normal credit information to International Commercial Supply Corp LLC for purposes of credit consideration. Authorized Signature: Title: Date: 933

8 QUICK REFERENCE TO MULTI-USE AND MANUFACTURERS THIS PAGE IS A QUICK REFERENCE TO FIND MULTI-USE PARTS AND SPECIFIC MANUFACTURERS OF PARTS. AIR SHUTTERS BLOCK-OFF KIT BURNERS MANUFACTURER INDEX ASCO BASO DORMONT FISHER PRODUCTS GENERAL CONTROLS HONEYWELL JOHNSON CONTROLS MAXITROL ROBERTSHAW WHITE RODGERS PAGES DIALS & KNOBS FITTINGS FLAME SENSORS FLANGES CONNECTORS FILTERS KETS IGNITION COMPONENTS IGNITION CONTROLS ORIFICES PILOTS REGULATORS THERMOCOUPLES THERMOPILES THERMOSTATS TOOLS TUBING CONTROL VALVES VALVES PILOT VALVES SAFETY VALVES SHUTOFF VALVES SOLENOID VALVES MULTI-USE INDEX PAGE PAGE AIR SHUTTERS BLOCK-OFF KIT BURNERS DIALS & KNOBS FITTINGS FLAME SENSOR FLANGES CONNECTORS FILTERS KETS IGNITION COMPONENTS IGNITION CONTROLS ORIFICES , PILOTS REGULATORS THERMOCOUPLES THERMOPILES THERMOSTATS TOOLS TUBING VALVES-CONTROL VALVES- VALVES-PILOT VALVES-SAFETY VALVES-SHUTOFF VALVES-SOLENOID 648, 653, , , 653, 655, 660, 666, , 801, , 659, , 658,

9 BASO PRODUCTS H-656 H-623 H-547 H-341 H-342 H-891 H-1184 AUTOMATIC PILOT SAFETY VALVES TYPE PILOT COMMENTS H-656 H15HR 3/16" TUBE - IN & OUT - H-623 H15AR 1/8" PIPE - IN & OUT 3/8" PIPE H-547 H43AB PILOT CONNECTION ON OUTLET END H-341 H43AA 1/4" TUBE - OUT ONLY PILOT CONNECTION OPPOSITE OUTLET END H-342 H43BA 1/2" PIPE H-891 H19AL 3/8" PIPE - H-1184 H15DA 3/4" PIPE 1/8" NPT - OUT ONLY SOLENOID VALVES VOLTAGE H-1010 H-1076 H-1206 H-1294 H /8" H H H /2" H-359A 120 H-360A 3/4" H-359A H-360A International Commercial Supply Corp., LLC - Phone Fax

10 BASO PRODUCTS H-831 H-832 H-833 H-974 UNIVERSAL REPLACEMENT PILOT ASSY TYPE COMMENT H-831 J995MDA-2 H-832 J999MHA-2 H-833 J999MKA-2 H-974 J998MDA-2 MULTI MOUNT PILOT 1/4" CC, NAT OR LP A-1246 A-1247 A-1248 A-1249 PILOT ORIFICES ORIFICE TYPE A-2240 A-2241 A NAT 3/16" TUBE A LP A NAT 1/4" TUBE A LP A NAT 1/8" PIPE A LP A-3474 A-3475 VALVE CONVERSION KITS CONVERT TO A-3474 LP A-3475 NAT VALVE MODELS G60/G696 SERIES, G93, G96, G195, G

11 DORMONT PRODUCTS THE SWIVEL-MAX PLANE ROTATION ALLOWS IN- CREASED MOVE- MENT AT EITHER END OF THE CONNECTOR, SIGNIFICANTLY REDUCING STRESS ON THE END OF THE HOSE. SUPR-SWIVEL MULTI-PLANE FITTINGS PIPE A /2" A /4" A " A /4" 90 STREET ELBOWS PIPE A /2" A /4" A " A /4" THREADED COUPLINGS PIPE A /2" A /4" A " REDUCING BUSHINGS A /4" MPT X 1/2" FPT A " MPT X 3/4" FPT A /4" MPT X 1" FPT SOLID BRASS QUICK DISCONNECT DEVICES PIPE A-541A 1/2" A-542A 3/4" A-543A 1" A /4" THIS SAFETY COMBINATION SHUTOFF / DISCONNECT IS DESIGNED WITH SAFETY IN MIND. IT MUST FIRST BE SHUT OFF IN ORDER FOR IT TO BE DISCONNECTED. CIMFAST QDV SAFETY FITTINGS PIPE H /2" H /4" H " International Commercial Supply Corp., LLC - Phone Fax

12 DORMONT PRODUCTS KIT INCLUDES - COATED CONNECTOR, 1 EA 1/2" X 3/4" ELBOW, 1 EA 1/2" ELBOW, AND 1 EA 1/2" FULL PORT VALVE. COUNTERTOP APPLIANCE CONNECTOR KITS PIPE LENGTH H " 1/2" H " STAINLESS STEEL COMMERCIAL CONNECTORS FOR STATIONARY EQUIPMENT ARE HIGH QUALITY AND FLEXIBLE. THEY ARE SAFER THAN BRASS CONNEC- TORS AND ARE CORROSION RESISTANT WITH A PVC COATING. NOTE: FOR USE ON STATIONARY EQUIPMENT ONLY. PLASTIC COATED CONNECTORS FOR (STATIONARY EQUIPMENT) PIPE LENGTH A-1684A 24" A-1685A 36" 1/2" A-1686A 48" A-1687A 60" A-1688A 24" A-1689A 36" 3/4" A-1690A 48" A-1691A 60" KIT INCLUDES - COATED CONNECTOR, A-542A QUICK DISCONNECT, H-607 SHUT OFF COCK, 2 EA A-3246 ELBOWS, S/S RESTRAINING CABLE. STANDARD SAFETY SYSTEM CONNECTOR KITS (FOR MOVABLE EQUIPMENT) PIPE LENGTH H " 3/4" H " KIT INCLUDES - COATED CONNECTOR, H-1226 QUICK DISCONNECT, A-3287 SUPR-SWIVEL, 1 EA A-3246 ELBOW, 1 EA S/S RESTRAINING CABLE. DELUXE SAFETY SYSTEM CONNECTOR KITS (FOR MOVABLE EQUIPMENT) PIPE LENGTH H " 3/4" H " 650

13 DORMONT PRODUCTS S/S CONNECTORS FOR (FOR MOVABLE EQUIPMENT) PIPE LENGTH A-705A 36" 1/2" A-706A 48" A-707A 36" A-708A 3/4" 48" A-709A 60" A-710A 48" 1" A-711A 60" A-1680A 48" 1-1/4" A-1681A 60" THIS COMMERCIAL CONNECTOR IS DESIGNED TO REDUCE STRESS WITH THE SWIVELS ON BOTH ENDS. IT IS MADE OF HEAVY DUTY, FLEXIBLE, CORRUGATED 304 STAINLESS STEEL. THE STAIN- LESS STEEL BRAID IS TIGHT-WEAVED TO PREVENT CORRUGATIONS FROM STRETCHING AS EQUIPMENT IS MOVED. COATED CONNECTORS FOR (FOR MOVABLE EQUIPMENT) PIPE LENGTH THIS COMMERCIAL CONNECTOR IS THE SAME AS ABOVE BUT ALSO HAS A PVC COATING TO INHIBIT GROWTH OF BACTERIA, MOLD, MILDEW AND CORROSION. A-712A 36" A-713A 1/2" 48" A-930A 60" A-714A 36" A-715A 48" 3/4" A-716A 60" A-931A 72" A-717A 48" A-718A 1" 60" A-932A 72" A-1682A 48" 1-1/4" A-1683A 60" COATED S/S RESTRAINING CABLES FOR CONNECTOR CABLE LENGTH A " 15" A " 24" A " 36" A " AND 72" 45" NOTE: CABLE LENGTH INCLUDE HOOKS International Commercial Supply Corp., LLC - Phone Fax

14 HONEYWELL PRODUCTS H-699 H-700 H-969 H-932 TYPE APPLICATION H-963 H-962 VALVES H-964 H-965 H-1144 H-699 1/2" X 3/4" MILLIVOLT VALVE VS820A H-700 PILOT CONTROL VALVE 3/4" X 3/4" MILLIVOLT VALVE NAT/LP *H-969 V800C 3/4" X 3/4" THERMOCOUPLE VALVE NAT 0.9 STEP H-932 VR8204A 1/2" X 1/2" 24V VALVE H-963 VR8304M DUAL AUTO INTERMITTENT PILOT 1/2" X 3/4" 24V VALVE NAT/LP H-962 VR4304M 3/4" X 3/4" 120V VALVE *H-965 VR8305P DIRECT IGN DUAL AUTO, HOT 3/4" X 3/4" 24V VALVE NAT 0.9 STEP *H-964 VR8305P SURFACE / SPARK SYSTEM 1/2" X 3/4" 24V VALVE NAT 1.2 STEP H-1144 V400A PILOT CONTROL VALVE 3/4" X 3/4" 120V THERMOCOUPLE VALVE NAT *STEP PRESSURE IS NOT ADJUSTABLE. NOTE: H-700, H-962, H-969, H-1144 COMES WITH 2 EACH 3/4" X 1/2" BUSHINGS AND 1 EACH 1/2" X 3/8" BUSHING. H-699 COMES WITH 1 EACH 3/4" X 1/2" BUSHING AND 1 EACH 1/2" X 3/8" BUSHING. H-932 COMES WITH 1 EACH 1/2" X 3/8" BUSHING. H-963 COMES WITH 1 EACH 3/4" X 1/2" BUSHING. NOTE: FOR TYPE CONVERSION KITS SEE PAGE 653. PRESSURE SETTING 652 F-304 F-303 F-287 F-288 UNIVERSAL INTERMITTENT PILOT MODULE AND DIRECT SPARK IGNITION MODULES TYPE APPLICATION LOCK OUT TIME COMMENTS F-304 F-303 S8610U S87B UNIVERSAL INTERMITTENT PILOT MODULE DIRECT SPARK IGNITION MODULE 90 SEC. 4 SEC. - (USES SINGLE ELECTRODE FOR SPARK IGN AND FLAME SENSING) F-287 S87D 4 SEC. (USES SEPARATE ELECTRODES FOR DIRECT SPARK IGNITION MODULE F-288 S87D 11 SEC. SPARK IGN AND FLAME SENSING)

15 HONEYWELL PRODUCTS H-967 H-968 H-910 TYPE PILOT ASSEMBLIES H-1113 H-1002 H-967 STRAIGHT TIP PILOT ASSY NAT/LP H-968 Q314 LEFT TIP PILOT ASSY NAT/LP H-910 RIGHT TIP PILOT ASSY NAT/LP H-1113 STRAIGHT TIP PILOT ASSY NAT H-1002 Q345A LEFT TIP PILOT ASSY NAT H-1114 RIGHT TIP PILOT ASSY NAT NOTE: FOR REPLACEMENT ORIFICE USE A-2232 FOR NAT AND A-2233 FOR LP. H-1114 PILOT ORIFICES ORIFICE A-2232 A-2233 A NAT ORIFICE A LP ORIFICE VALVE CONVERSION KITS CONVERT TO VALVE MODEL SERIES H-789 LP H-790 NAT H-933 LP H-934 NAT VR4200, VR4300, VR8200, VR8300 V800, VS820, VS821 H-789 H-790 H-933 H-934 THERMOPILE TYPE COMMENT H-966 Q313 35" - 2 LEAD ARMORED H-966 International Commercial Supply Corp., LLC - Phone Fax

16 JOHNSON PRODUCTS F-410 E-346 F-308 F-319 F-321 F-263 TYPE IGNITION MODULES REPLACES F-410 G770MGC-3 24V NAT/LP IGNITION CONTROL G67AG-3 E-346 G770KHA-2 G770KHA-1 24V NAT IGNITION CONTROL F-321 G770LHC-1 *F-263 G779LHA-1 24V NAT/LP IGNITION CONTROL UNIVERSAL REPLACEMENT F-308 G770BAD-1 24V F-319 G760CAD-1 24V * REPLACES MANY JOHNSON CONTROLS, HONEYWELL, RSW. CALL WITH MFG AND CONTROL H-548, H-467 H-835 THERMOCOUPLE WITH JUNCTION BLOCK H " THERMOCOUPLE H " THERMOCOUPLE H-835 THERMOCOUPLE HEAVY DUTY THERMOCOUPLES PENN BASO H " K16BT-18 H " K16BT-24 H " K16BT-36 *H " K16RA-48 *H " K16RA-60 * NICKEL-PLATED (PIZZA OVENS) 654

17 MAXITROL PRODUCTS H-322 H-323 H-324 H-325 H-471 H-472 H-473 H-474 H-572 H-573 H-469 H-470 H-475 H-476 H-477 H-478 A-2771 APPLIANCE PRESSURE REGULATORS MAXITROL PIPE MAXIMUM INLET PRESSURE ADJUSTABLE RANGE TYPE H-322 3"-6" W.C. NAT 1/2" H "-12" W.C. LP RV48 1/2 PSIG H-324 3"-6" W.C. NAT H "-12" W.C. LP H-469 3"-6" W.C. NAT R500 3/4" 1 PSIG H "-12" W.C. LP H-471 3"-6" W.C. NAT H "-12" W.C. LP RV53 1/2 PSIG H-473 3"-6" W.C. NAT H "-12" W.C. LP 1" H-475 3"-6" W.C. NAT H "-12" W.C. LP RV61 H-477 3"-6" W.C. NAT 1-1/4" 1 PSIG H "-12" W.C. LP H-572 3"-6" W.C. NAT RV81 1-1/2" H-573 5"-12" W.C. LP NOTE: ALL REGULATORS HAVE VENT LIMITERS INSTALLED, EXCEPT H-572 & H-573 WHICH MUST BE VENTED TO THE OUTSIDE. A-2771 BRASS VENT LIMITING DEVICE CAN BE USED ON H-322, H-323, H-324, H-325, H-469, H-470, H-471 & H-472. FISHER PRESSURE REGULATORS SEE PAGE 684 International Commercial Supply Corp., LLC - Phone Fax

18 ROBERTSHAW PRODUCTS THERMOSTATS ARE 4-POSITION TAPPED AND MAY BE MOUNTED IN ANY OF THE FOUR MANIFOLD POSITIONS. REAR HOUSING MAY BE ROTATED AS REQUIRED. SUPPLIED WITH 4-POSITION DIALS. A-562 A-373 G-507, G-168, G-169 BJWA THERMOSTAT KITS AND DIALS REAR BODY POSITION TEMP. RANGE G-508, G-161 BULB CAPILLARY PIPE G-508 *UP 150º-440ºF 3/16" X 8" 36" A-562 G-161 *DOWN G-507 *UP 250º-500ºF 1/4" - 48" G-168 3/16" X 11-5/8" *DOWN 250º-550ºF A-373 G " NOTE: KITS ARE SUPPLIED WITH DIAL AND HARDWARE. * REAR BODY POSITION IS IDENTIFIED BY LOOKING AT THE DIAL WITH THE INLET DOWN. DIAL ONLY THERMOSTATS ARE SAME AS ABOVE BUT HAVE ONLY ONE 7/16" REAR TAPPED OUTLET FITTING. G-192 G REAR BODY POSITION BJWA THERMOSTAT KITS AND DIAL TEMP. RANGE BULB CAPILLARY OUTLET NOTE: KITS ARE SUPPLIED WITH DIAL, HARDWARE, 1/4" PIPE AND 3/8" TUBING FITTINGS. * REAR BODY POSITION IS IDENTIFIED BY LOOKING AT THE DIAL WITH THE INLET DOWN. A-373 DIAL ONLY G º-550ºF 48" *DOWN 3/16" X 11-5/8" 7/16" REAR A-373 G º-550ºF 72" FLANGE AND KET KITS SEE PAGE 677

19 ROBERTSHAW PRODUCTS THERMOSTAT KITS HAVE FOUR 3/8" PIPE FITTINGS. 2 PLUGS ARE SUPPLIED. TWO 1/4" TUBE PILOT OUTLETS ARE PROVIDED WITH 3/16" TUBE ADAPTER AND 1/4" PLUG. 4-POSITION DIAL ALLOWS THERMOSTAT TO BE MOUNTED IN ANY ONE OF 4 MOUNTING POSITIONS. G-182A, G-183, G-184 A-254 A-255 A-256 FD STYLE THERMOSTAT KITS AND DIALS TYPE RANGE BULB CAPILLARY PIPE COMMENTS DIAL ONLY *G-182A FDO 150º-550ºF A-254 *G-183 FDTO LOW-550ºF 3/16" X 14-3/4" 54" 3/8" KITS A-255 *G-184 FDTH 300º-650ºF A-256 * KITS ARE SUPPLIED WITH DIAL AND HARDWARE. A-256 G-185 FDH THERMOSTAT AND DIAL TYPE RANGE BULB CAPILLARY PIPE COMMENTS DIAL ONLY G-185 FDH 300º-650ºF 3/16" X 14-3/4" 54" 1/2" WITH DIAL A-256 NOTE: HOUSING KET SEE PAGE 678 International Commercial Supply Corp., LLC - Phone Fax

20 ROBERTSHAW PRODUCTS H-888 (TS) BODY & MAGNET HEAD ASSEMBLIES OUTLET ONLY STYLE BODY HEAD H-888 3/8" PIPE 1/4" TUBE H-335 H-336 H-337 H-338 H-339 H-880 H-1339 (TS) BODY & MAGNET HEAD ASSEMBLIES INLET & OUTLET STYLE BODY HEAD H-335 3/8" PIPE 3/16" TUBE H-336 1/2" PIPE 1/4" TUBE H-337 1/4" PIPE 3/16" TUBE H-338 7/16" TUBE 1/4" TUBE H-339 3/8" PIPE 1/8" PIPE H-880 1/4" PIPE 1/4" TUBE H /8" PIPE 1/4" TUBE (TS) MAGNET HEAD KITS SPECIFICATIONS H-207 H-208 H-207 PILOT IN AND OUT H-208 PILOT OUT ONLY INLET & OUTLET 1/8" PIPE WITH ADAPTERS FOR 3/16" & 1/4" TUBING OUTLET 1/8" PIPE WITH ADAPTERS FOR 3/16" & 1/4" TUBING BODY FOR (TS) SAFETY VALVES H-247 1/4" PIPE H-248 3/8" PIPE H-249 1/2" PIPE H-250 7/16" COMPRESSION 658

21 ROBERTSHAW PRODUCTS 2 LEAD OR COAXIAL MILLIVOLT VALVES BTU/HR CAPACITY *H-233 NAT 1/2" X 3/4" 240,000 *H-232 LP *H-235 NAT 3/4" X 3/4" 300,000 *H-234 LP * H-232 & H-233 ARE 3 WAY, H-234 & H-235 ARE STRAIGHT THROUGH. THERMOCOUPLE 120V VALVES BTU/HR CAPACITY *H-237 NAT 1/2" X 3/4" 240,000 *H-236 LP *H-239 NAT 3/4" X 3/4" 300,000 *H-238 LP * H-236 & H-237 ARE 3 WAY, H-238 & H-239 ARE STRAIGHT THROUGH. NATURAL VALVES VOLTS BTU/HR CAPACITY STYLE H-507 3/4" 300,000 THERMOCOUPLE 24V H-508 1/2" 240,000 THERMOPILE H-509 3/4" 120V 300,000 H-507 H-508 H-509 NATURAL VALVES FOR ELECTRIC IGNITION VOLTS BTU/HR CAPACITY COMMENT H /2" 240,000-24V H-596 3/4" 300,000 W/ (2) 1/2" REDUCING BUSHINGS NOTE: REMOVABLE SLOW CLOSING FEATURE. MILLIVOLT OPERATED COMPACT VALVE PIPE TYPE BTU CAPACITY H-709 1/2" NAT/LP 70,000 NOTE: 1/2" X 3/8" FLUSH REDUCERS INCLUDED H-709 International Commercial Supply Corp., LLC - Phone Fax

22 ROBERTSHAW PRODUCTS H-617 H-618 OPERATORS 3.5" W.C. NATURAL TYPE FACTORY MODEL BLOCK COLOR H-619 H V BLACK ER H V BROWN H MV-750MV MVR RED ADD-ON PRESSURE REGULATOR KITS REGULATOR TYPE ADJUSTABLE W.C. PRESSURE H-510 H-511 H-512 H " W.C. 3"-7" NAT H " W.C. 8"-12" LP H-512 COVER PLATE - A-1082 N-107 A-260 L-177 ADAPTERS, KNOB AND HIGH LIMIT WIRE A-1082 DRIVE ROD ADAPTER N-107 THERMOCOUPLE ADAPTER A-260 UNITROL KNOB FOR 700 SERIES L " LONG HIGH LIMIT LEAD WIRE 660

23 ROBERTSHAW PRODUCTS H-365 H-366 H-602 H-664 H-367 H-368 H-559 H-645 H-941 H-940 H-364 H-499 H-498 H-501 H-665 H-1042 H-948 H-915 NAT/LP PILOT KITS FOR THERMOCOUPLES OR THERMOPILES TUBE FACTORY FLAME PATTERN H C-1, 2CH-2 H-366 2C-2, 2CH-2 STANDARD *H-602 2C-2 REVERSE 1/4" H-664 2C-6, 2CH-6 STANDARD H-367 2CL-2, 2CHL-2 LEFT HAND H-368 2CR-2, 2CHR-2 RIGHT HAND H-559 3/16" OR 1/4" 2C-10, 2CH-10 H-645 3C-4, 3CH-4 STANDARD H-941 3CL-2, 3CHL-2 LEFT H-940 3C-2, 3CH-2 H-364 3C-6, 3CH-6 STANDARD H-499 3C-10, 3CH-10 H-498 1/4" 6C14-6, 6CH14-6 H-501 6C14-10, 6CH WAY H-665 6C24-6, 6CH24-6 H CL-1, 3CH2-1 LEFT H-948 4C-6, 4CH-6 3-WAY H-915 6C24-9, 6CH24-9 STANDARD * FOR THERMOCOUPLE ONLY. ALL OTHERS FIT THERMOCOUPLES & THERMOPILES. International Commercial Supply Corp., LLC - Phone Fax

24 ROBERTSHAW PRODUCTS H-265 H-577 H-578 H-210 MINI PILOTS COMMENTS H-265 HORIZONTAL MOUNT 24" H-577 VERTICAL MOUNT H " HORIZONTAL MOUNT H " VERTICAL MOUNT H-209 H-517 H-518 A-243 A-244 NAT/LP PILOT KITS FOR FMEA, FMDA SAFETY VALVES TUBE FACTORY NAT. ORIFICE ONLY LP ORIFICE ONLY H E H-209 1/4" OR 3/16" 11EA A-243 A-244 H EB H-240 NAT/L.P. PILOT KIT FOR THERMOCOUPLE SAFETY VALVES TUBE FACTORY COMMENT H-240 1/4" OR 3/16" 11 FOR USE WITH THERMOCOUPLES 662

25 ROBERTSHAW PRODUCTS UNIVERSAL PILOT ASSY FOR OBSOLETE RSW PILOTS OBSOLETE PILOT COMMENTS H B H B/2BLC FOR 3/16" AND 1/4" TUBING - NAT/LP H-1377 H-1378 PILOT ORIFICE FOR IIE, IIEA AND IIEB SERIES A NAT ORIFICE A LP ORIFICE A-243 A-244 PILOT ORIFICES FOR C AND CH SERIES PILOTS ORIFICE A A A A NATURAL ORIFICE LP ORIFICE A-1101 A-1099 A-1100 A-1098 ROBERTSHAW 700 SERIES VALVE CONVERSIONS CONVERT TO COMMENT H-1357 H-1358 H-1357 NAT H-1358 LP SPRING AND CAP ROBERTSHAW ADD-ON PRESSURE REGULATOR KITS FOR 700 SERIES REGULATOR TYPE ADJUSTABLE W.C PRESSURE H " W.C. 3"-7" NAT H " W.C. 8"-12" H-512 COVER PLATE - TYPE LP H-510 H-511 H International Commercial Supply Corp., LLC - Phone Fax

26 ROBERTSHAW PRODUCTS 120V SOLENOID VALVE AND COILS H-444 H-549 H-1102 H-1322 COMMENTS H-444 3/8" NEW STYLE VALVE W/ BLACK COIL H-549 OLD STYLE WHITE COIL ONLY (.10 AMP) H OLD STYLE RED COIL ONLY - (.13 AMP) H-1322 NEW STYLE BLACK COIL ONLY THERMOCOUPLES 1980 SNAP-FIT ROBERTSHAW THERMOCOUPLES 1970 UNI-COUPLE (WITH ZIP TIP) ROBERTSHAW *H H " H " H " H " H " H " H " * ASSORTED 10-PACK INCLUDES: 1-(18"), 4-(24"), 4-(36") AND 1-(48") H " H " H " H " H " H " H " HEAVY DUTY THERMOCOUPLES 1900 SERIES ROBERTSHAW H " H " H " H " THERMOPILES TYPE H-229 H-906 H-230 H-231 H-907 A-1762 H LEAD WITH PG9 ADAPTER 32" H LEAD H " COAXIAL (SCREW IN) H LEAD WITH PG9 ADAPTER 60" H-907 COAXIAL (SCREW IN) A PG9 ADAPTER ONLY 664

27 WHITE RODGERS/ITT/GENERAL-CONTROLS PRODUCTS H-898 H-1256 H-899 NAT/LP COMBINATION VALVES PIPE COIL VOLTAGE CAPACITY INCLUDES H-898 3/4" X 1/2" REDUCING BUSH. AND LP CONV. 3/4" X 1/2" 24 VOLT *H ,000 3/4" X 1/2" & 1/2" X 3/8" BUSH. AND LP CONV. H /4" 120V 2EA 3/4" X 1/2" AND 1 EA 1/2" X 3/8" REDUCING BUSH. AND LP CONV. NOTE: H-947 CONVERTS VALVES TO LP, H-1307 CONVERTS VALVES TO NAT. * H-899 HAS SIDE TAPS. SAFETY PILOT VALVES H-893 3/8" H-973 1/2" THERMOCOUPLE VALVE NOTE: CONSIDER AS AN ALTERNATIVE FOR OBSOLETE ITT-GENERAL CONTROLS MR5 VALVES. International Commercial Supply Corp., LLC - Phone Fax

28 WHITE RODGERS/ITT/GENERAL-CONTROLS PRODUCTS H-363 TYPE PILOT GENERATOR LEAD LENGTH H-363 NAT/LP 32" PILOT AND PG9 THERMOPILE PILOT ORIFICES TUBE ORIFICE TYPE PILOT STYLES A-1250 A-1251 A-1252 A-1253 A NAT A LP 1/4" A NAT A LP 1260, 26T, PG, PG9, PG1 26T, PG9 H-372 PILOT-COUPLE FOR LP AND NAT FITTING LENGTH COMMENT H-372 1/4" TUBING 48" VERTICAL INLET CONNECTION H-1302 H-1257 H-1258 H-1259 LEAD LENGTH PILOT GENERATORS TERMINAL STYLE H " THERMOPILE H-1257 PG9 THERMOPILE 36" SPADES H-1258 ARMORED GENERATOR H " WITH PG9 ADAPTER H-947 H-1307 H-947 LP H-1307 NAT VALVE CONVERSION KITS CONVERT TO VALVE MODEL SERIES 36C, 36D, 36E, 36F, 36G 666

29 AIR SHUTTERS A-239 A-1188 A-2648 A-3679 A-2121 A-2478 A-3737 A-973 A-1029 A-1030 AIR SHUTTERS FOR CAST IRON BURNERS TYPE FITS BURNER HOLE A-239 2" 13/32" A-1188 A /16" SINGLE 2-1/8" A-2478 A /16" A /2" A " 7/16" A-1030 DOUBLE 9/16" 2-1/2" A-973 7/16" A-3679 SINGLE 3" AIR SHUTTERS FOR STEEL TUBE BURNERS A-1771 A-1772 A-1771 FITS 1" STEEL BURNER A-1772 FITS 1-1/4" STEEL BURNER International Commercial Supply Corp., LLC - Phone Fax

30 BLOCK-OFF KIT AND BURNERS UNIVERSAL MANIFOLD BLOCK-OFF KIT THIS KIT ALLOWS A QUALIFIED SERVICEMAN TO BLOCK OFF THE FLOW TEMPORARILY ON THE FOLLOWING CONTROLS: BJ, BJC, BJFMA AND U SERIES FLANGE NIPPLE MOUNTS U SERIES DIRECT MOUNT U, GV, ELO, AND OTHER ROBERTSHAW SPRING CLIP MOUNTS N-110 A GOOD TRUCK ITEM USED WITH VC4350, VC4500, VC4510, VC4520, VC4625, VC4700, VC4725 AND VC4750 SERIES. HOT DOG CART BURNER SPECIFICATIONS A-3250 A BTU 7" LONG, 3-5/8" DIA. HEAD A-1781 A-1782 DRILL LENGTH A-457 A-1628 A-1629 A-1630 A-458 A-1631 JET BURNERS THREAD COMMENTS A-1632 A-1633 CAP ONLY A-1782 LP-75 OXYGEN PORT IS.2500" 1-3/8" 5/16" - 27 A-1781 NAT-56 OXYGEN PORT IS.1610" A-1628 A-1629 A-458 LP-77 LP-77 LP-77 A-457 A-1630 A-1631 NAT-68 NAT-68 NAT /4" 2-1/16" 2-3/8" 5/16" /16" /16" - 24 CAP HAS 6 SLOTS A-1632 LP-77 1/8" - 2-3/16" A-1633 NAT-68 TAPER PIPE CAP HAS 7 SLOTS - A A-1636 A

31 BURNERS A-1767 MULTI-USE STRAIGHT & LOOP BURNERS BTU/HR TYPE COMMENT A /4" X 18" 30,000 NAT/LP 11-1/4" FLAME AREA A " 22,000-15" FLAME AREA A " 30, /4" FLAME AREA A /4" NPT AIR MIXING CHAMBER ONLY FOR A-1767 A-1768 A-3677 A-1770 MULTI-USE BURNERS BTU/HR TYPE A-418 3" DIA 5,000 A-420 7,000 4" DIA A ,000 NAT/LP A-426 5" DIA 20,000 A-428 7" DIA 28,000 A-418 A-420 A-424 A-426 A-428 A-1769 A-2351 A-1781 A-1782 A-2069 A-2070 MULTI-USE BURNERS JETS BTU/HR TYPE A-1769 NAT 9" DIA ,000 A-2351 LP A-1781 NAT JET ONLY - - A-1782 LP A-2069 NAT 7-1/2" DIA ,000 A-2070 LP NOTE: BURNER INLETS ARE 1/2" FPT. International Commercial Supply Corp., LLC - Phone Fax

32 DIALS, KNOBS AND ACCESSORIES A-375 A-378 A-379 A-258 A-565 A-3229 A-559 SPECIFICATIONS DIAL ACCESSORIES A STEM FLAT SLIP FIT DIAL INSERT A-378 3/4" SHAFT "D" STEM ADAPTER FOR BJWA A /4" SHAFT "D" STEM ADAPTER FOR BJFMA A-258 ADJUSTABLE TO 3-1/2" STEM EXTENSION A BEZEL ADAPTER KIT FOR BJWA A-3229 "D" STEM FOR FD SERIES THERMOSTATS A SERIES "D" SERIES CHROME BEZEL A-259 A-316 A-3914 A-366 A-367 A-1609 A-1484 A-260 A-2062 A-4144 KNOBS FOR STANDARD VALVES A-259 CHROME PLATED METAL HANDLE WITH SET SCREW A-3914 RED HEAT RESISTANT METAL HANDLE WITH SET SCREW A-316 BLACK PLASTIC HANDLE WITH SET SCREW A-366 BLACK PLASTIC HANDLE A-367 BLACK PLASTIC HANDLE WITH CHROME STRIP A-1609 BLACK PLASTIC HANDLE WITH CHROME BAND A-260 RSW 700 SERIES DIAL A-1484 CHROME PLATED METAL HANDLE (UP OR DOWN) A-2062 CHROME PLATED METAL HANDLE FLAT DOWN A-4144 CHROME PLATED METAL HANDLE FLAT UP 670

33 DIALS A-371 GS FIXED POSITION DIAL DIAL MARKING FLAT LOCATION A ºF DOWN A-562 A-374 A-373 A-1564 A-254 A-255 A-256 ADJUSTABLE 4-WAY DIAL KITS DIAL MARKING A-562 LO-400º-HI THERMOSTAT TYPE A ºF BJWA A-373 LOW-550º-BROIL A º-BROIL BJWA, MP, UAF, UHF A º A-255 LOW-550º FD A º 671 International Commercial Supply Corp., LLC - Phone Fax

34 DIALS A-2626 A-2737 A-2846 A-2061 A-2396 A-2398 A-2409 A-3562 A-3657 A-3658 A-3156 A-2400 A-2407 A-3247 DIAL TEMP. BJ FIXED DIALS LOCK NOTCH ROUND STEM DIMENSION "A" DIAL / MARKINGS A-2626 UP 11/16" 2" (GRIDDLE) A /8" LO º-HI *A /8" 2" DOWN A " 2" (GRIDDLE) A /16" 2" (OVEN) **A /8" 2-3/8" A-2396 UP 1-3/16" 2" (OVEN) A " (GRIDDLE) 7/8" A " (OVEN) LOW-500º A " **A /8" 2-3/8" (GRIDDLE) **A-2409 DOWN 2-3/8" (OVEN) A /16" A /16" 2" (OVEN) ** A-2407, A-2409 AND A-3247 ARE RED. * A-3156 IS WHITE. ALL OTHERS ARE BLACK. A-1026 A-2411 FD FIXED DIALS ( 2-1/2" DIA) DIAL TEMP TEMP. AT DIAL FLAT A F A-2411 LOW F A-2336 LOW F A F A-2336 A

35 FITTINGS BLACK IRON PIPE NIPPLES A /8" NPT X CLOSE A /8" NPT X 1-1/2" A /8" NPT X 2" BRASS PIPE NIPPLES A /4" NPT X CLOSE A /4" NPT X 1-1/2" A /4" NPT X 2" A /8" NPT X CLOSE A /8" NPT X 1-1/2" A /8" NPT X 2" A /2" NPT X CLOSE A /2" NPT X 1-1/2" A /2" NPT X 2" International Commercial Supply Corp., LLC - Phone Fax

36 FITTINGS A-2137 A-2138 A-3261 A-3926 A-2139 A-2140 A-3272 A-240 A-304 ADAPTERS AND FITTINGS COMMENTS A-3694 A-377 A /8" MPT A /4" MPT A /8" MPT PIPE PLUG BRASS A /4" MPT A /4" MPT X 5/16" CC A /4" MPT X 1/4" CC ADAPTER FITTING NICKEL PLATED A /2" MPT X 1/4" FPT A-240 1/2" MPT X 3/8" FPT STEEL A-304 3/4" MPT X 1/2" FPT REDUCER FITTING A /8" MPT X 3/8" FPT BRASS A-377 1/4" MPT X 3/8" FPT NICKEL PLATED MPT REDUCER KITS A-1773 A-1774 A /2" TO 3/8" REDUCER KIT WTIH INSTALLATION TOOL A /4" TO 1/2" REDUCER KIT WITH INSTALLATION TOOL A-303 STUFFING BOX COMMENT A-303 3/8" NICKEL PLATED A-224 TANK ADAPTER KIT COMMENT A-224 NICKEL PLATED 674

37 FITTINGS REDUCING FITTINGS A-417 1/4" MALE TUBE X 3/16" CC FITTING A /4" FEMALE TUBE X 3/16" CC FITTING A /16" MALE TUBE X 1/8" CC FITTING A /8" FPT X 1/4" MPT HEX BUSHING A-417 A-2990 A-1804 A-3917 BREAK-AWAY NUT & SLEEVE (SEPARATES UPON TIGHTENING) TUBE A /8" A /16" A /4" A /8" A /16" VALVE CONNECTORS A /8"-27" X 1/4" TUBE A /8"-27" X 5/16" TUBE A /8"-27" X 3/8" TUBE A /8"-27" X 7/16" TUBE A /8"-27" X 1/8" MPT A /8"-27" X 1/4" MPT A A A A A FEMALE PIPE CONNECTOR 1/8" NPT X 1/8" TUBE 1/8" NPT X 3/16" TUBE 1/8" NPT X 1/4" TUBE 1/8" NPT X 5/16" TUBE 1/8" NPT X 3/8" TUBE MALE BRANCH TEE A A A /8" NPT X 1/8" TUBE 1/8" NPT X 3/16" TUBE 1/8" NPT X 1/4" TUBE International Commercial Supply Corp., LLC - Phone Fax

38 FITTINGS NUT SLEEVE UNION TEE ELBOW NUT NUT, SLEEVE, UNION, TEE AND ELBOW COMPRESSION FITTINGS SLEEVE UNION TEE ELBOW A A A A A /8" A A A A A /16" A A A A A /4" A A A A A /16" A A A A A /8" TUBE A A A /16" CONNECTORS AND ELBOW COMPRESSION FITTINGS CONNECTOR ELBOW PIPE X TUBE CONNECTOR ELBOW A A /8" X 1/8" A A /8" X 3/16" A A /4" X 3/16" A A /8" X 1/4" A A /4" X 1/4" A A /8" X 1/4" A A /8" X 5/16" A A /4" X 5/16" A A /8" X 3/8" A A /4" X 3/8" A A /8" X 3/8" A A /4" X 7/16" A A /8" X 7/16" 676

39 FLAME SENSORS AND FLANGES E-386 E-562 F-244 E-347 PROBE LENGTH FLAME SENSORS SPECIFICATION F-244 1" E /8" 1/4" MALE STRAIGHT TERMINAL E /4" 1/4" MALE 90 TERMINAL E /8" 1/4" MALE STRAIGHT TERMINAL A-589 B-226 B-661 A-2662 FLANGE NIPPLE KITS AND PARTS COMMENTS *A-589 BJFMA-SERIES NIPPLE KIT 3PC-NARROW TYPE FLANGE 15/32" LONG, 19/32" LONG, 23/32" LONG B-226 BJ-WIDE FLANGE KET FOR BJ THERMOSTATS, 1-1/8" CENTERS B-661 BJFMA-NARROW FLANGE KET FOR BJFMA THERMOSTATS, 1-1/8" CENTERS A-2662 BJFMA-19/32" LONG FLANGE ONLY FOR BJFMA THERMOSTATS * EACH NIPPLE KIT ALSO COMES WITH 1 EACH 1/8" FPT X 9/16-27 NS MALE ADAPTER. A-3286 A-3245 A-3280 A-3283 A-541A A-1684A A-722 CONNECTORS, CONNECTOR FITTINGS, DISCONNECTS AND RESTRAINING CABLES SEE DORMONT PAGES International Commercial Supply Corp., LLC - Phone Fax

40 FILTERS AND KETS H-627 H-628 H-633 H-634 H-1269 ADJUSTABLE FILTERS STYLE H-627 1/8" NPT X 1/8" TUBE H-628 1/8" NPT X 3/16" TUBE H-633 1/8" NPT X 1/8" TUBE H-634 1/8" NPT X 3/16" TUBE H /8" NPT X 1/8" CC & 3/16" CC SINGLE STRAIGHT TWIN STRAIGHT B-185 B-226 B-661 B-297 A-1483 B-643 B-673 KETS SPECIFICATIONS B FDO THERMOSTAT HOUSING KET B-226 BJ WIDE FLANGE THERMOSTAT KET 1-1/8" CTRS B-661 BJFMA NARROW FLANGE THERMOSTAT KET B-297 2" CTRS A-1483 BURNER HEAD KET B /2" CTRS B-673 3" CTRS 678

41 IGNITION COMPONENTS 250 C ORANGE IGNITION WIRE KIT L FT OF 20 GAUGE 25KVDC ORANGE WIRE 2 EA 1/4" FEMALE 90 PUSH-ON'S 2 EA 1/4" FEMALE STRAIGHT PUSH-ON'S 2 EA 1/8" FEMALE ROUND PUSH-ON'S 2 EA 1/4" FEMALE STRAIGHT FULLY INSULATED PUSH-ON'S 2" OF 1/4" HEAT SHRINK TUBING 250 C RED IGNITION CABLE KIT L FT OF 20 GAUGE 25KVDC RED WIRE 1 EA 90 BOOT 1 EA STRAIGHT BOOT 1 EA 90 IGNITION TERMINAL 2 EA STRAIGHT IGNITION TERMINALS 2 EA 1/4" FEMALE STRAIGHT PUSH-ON'S 2 EA RING TERMINAL FOR #10 STUD 2" OF 3/8" HEAT SHRINK TUBING A-3684 A-3683 A-3535 A-3685 A-3534 IGNITION COMPONENTS SPECIFICATIONS L-329 A-3684 SPARK PLUG MALE X 1/4" FEMALE PUSH - ON A-3683 SPARK PLUG FEMALE X 1/4" MALE PUSH - ON ADAPTER A /4" MALE ENCAPSULATED PUSH - ON X WIRE END A-3685 STRAIGHT SPARK PLUG FEMALE X CRIMP ON IGNITION WIRE A SPARK PLUG FEMALE X CRIMP ON IGNITION WIRE CONNECTOR L GAUGE 250 C ORANGE IGNITION WIRE - (SOLD BY FOOT) L GAUGE 250 C RED IGNITION CABLE - (SOLD BY FOOT) WIRE L GAUGE 538 C CORE C JACKET BLACK IGNITION CABLE -(SOLD BY FOOT) A-3691 SILICONE BOOT - STRAIGHT STRAIGHT BOOT A-3692 SILICONE BOOT BOOT A /8" ROUND FEMALE PIN CONNECTOR L-330 A-3692 L-340 A-3691 A-3742 IGNITION CONTROLS - HONEYWELL SEE PAGE 652 JOHNSON SEE PAGE 654 F-304 HONEYWELL JOHNSON F-410 International Commercial Supply Corp., LLC - Phone Fax

42 ORIFICES A-1246 A-1247 A-1248 A-1249 BASO PILOT ORIFICES ORIFICE TYPE A-2240 A-2241 A NAT 3/16" TUBE A LP A NAT 1/4" TUBE A LP A NAT 1/8" PIPE A LP ITT/GENERAL PILOT ORIFICES TUBE ORIFICE TYPE PILOT STYLES A-1250 A-1251 A-1252 A-1253 A NAT A LP 1/4" A NAT A LP 1260, 26T, PG, PG9, PG1 26T, PG9 A-2232 A-2233 HONEYWELL PILOT ORIFICES ORIFICE A NAT ORIFICE A LP ORIFICE ROBERTSHAW PILOT ORIFICES A-243 A-244 A-1101 A-1099 A-1100 A-1098 PILOT ORIFICE FOR IIE, IIEA AND IIEB SERIES A NAT ORIFICE A LP ORIFICE PILOT ORIFICES FOR C AND CH SERIES PILOTS ORIFICE A A A A NATURAL ORIFICE LP ORIFICE 680

43 REPLACEMENT ORIFICES A-1236 A-1618 A-241 A-1619 A-2797 A-4247 A-1237, A-1238 A-1239, A-1620 A-1621 BURNER ORIFICES A-2219 A-1240 A-1622 A-1625 A-1241 A-2266 DRILL THREADS OVERALL COMMENTS/ LENGTH TYPICAL APPLICATION A ANETS, GARLAND, SOUTHBEND, 1/2" /16" A VULCAN HART A FRANKLIN CHEF, GARLAND, SOUTHBEND, A /4" U.S. RANGE, VULCAN HART, WOLF 3/8" - 27 A /4-36 ID THD - USED WITH A1242 A /8" 72 A /8" A /16" A /2" BAKERS PRIDE A PITCO, 11/32" /16" A STAR A-1239 BLANK 1/8" - PIPE 1/2" FRYMASTER A A /8" /16" KEATING A /16" BLODGETT, CECILWARE A /4" - PIPE 2-1/8" A /4" - A A /8" - PIPE 5/8" MALE X FEMALE A A A BAKERS PRIDE, VULCAN HART 1/4" - 36 A A /8" A A /16" A /16" - 24 GARLAND 72 A-662 5/16" RENEWAL ADAPTER A A /8" PRESS-IN SHOULDER NEEDLE - A /16" DROP-IN NEEDLE A /8" - PIPE 1-1/8" - A /4" - PIPE 9/16" BLODGETT A /8" FPT /8" GROEN, MARKET FORGE, WOLF A /8" MPT A A-241 ORIFICE WITH HOLDER A-3734 A-1242 A-1624 A-3669 A-3670 A-3671 A-3672 A-4146 A-1245 A-2514 A-3688 A-2191 A-430 A-431 A-662 A-4153 A-1025 A-1652 A-3689 International Commercial Supply Corp., LLC - Phone Fax

44 ORIFICE KITS AND PILOTS BURNER ORIFICE KIT CONTAINS 13 OF THE MOST COMMON PARTS USED ON COMMERCIAL EQUIPMENT 89 PIECE KIT PILOT ORIFICE KIT CONTAINS 14 OF THE MOST COMMON PARTS USED ON COMMERCIAL EQUIPMENT 59 PIECE KIT N-282 N-283 BUILD YOUR OWN PILOT ASSEMBLIES "ON THE JOB" BY ING OUR PILOT HEAD, TUBING AND FITTINGS. THERE IS NO NEED TO SPECIAL ORDER MOST MANUFACTURERS PILOT ASSEMBLIES. OUR TUBING IS EASILY CUT AND BENT BY HAND. PILOT HEADS AND STEEL TUBING A-1235 A-2382 A-1235 PILOT HEAD FOR 3/16" COMPRESSION TUBING A-2382 PILOT HEAD FOR 1/4" COMPRESSION TUBING A-2796 STEEL PILOT TUBING 1/8" X 36" LONG A-1233 STEEL PILOT TUBING 3/16" X 36" LONG A-1234 STEEL PILOT TUBING 1/4" X 36" LONG A-1233 A-1234 A-2796 UNIVERSAL PILOT TUBE H-529 H-529 3/16" TUBE X 18" LONG NOTE: ALL STEEL CONSTRUCTION 682

45 H-363 GENERAL CONTROL H-967 H-1002 HONEYWELL H-831 BASO H-974 H-365 H-498 H-265 ROBERTSHAW H-209 H-240 H-1378 PILOTS - BASO SEE PAGE 648 GENERAL CONTROLS SEE PAGE 666 HONEYWELL SEE PAGE 653 ROBERTSHAW SEE PAGE H-789 H-1357 A-3474 BASO HONEYWELL ROBERTSHAW H-510 H-947 WHITE RODGERS REGULATORS AND VALVE CONVERSIONS - BASO SEE PAGE 648 HONEYWELL SEE PAGE 653 ROBERTSHAW SEE PAGE 660 WHITE RODGERS SEE PAGE 666 International Commercial Supply Corp., LLC - Phone Fax

46 REGULATORS AND CONNECTORS - FISHER PRODUCTS IDEAL FOR USE WITH PORTABLE L.P. TANKS FOR OUTDOOR COOKING. H-1253 H-1254 INTEGRAL TWO-STAGE UNITS COMBINE A FIRST STAGE REGULATOR AND SECOND STAGE REGULATOR INTO ONE COMPACT UNIT. RECOMMENDED FOR INSTALLATIONS WHERE PIPING DISTANCE IS SHORT, INTEGRAL TWO-STAGE REGULATORS PROVIDE ALL THE ADVANTAGES OF TWO-STAGE REGULATION. DESIGNED FOR INSTALLATIONS WITH CAPACITY LISTED BELOW. INTEGRAL TWO-STAGE REGULATORS PRESSURE RANGE MODEL / CAPACITY PROPANE H "- 13" WC 1/4" FPT INLET X 1/2" FPT OUTLET REGULATOR R232-BBF (350,000 BTU) H "- 13" WC 1/4" FPT INLET X 3/4" FPT OUTLET REGULATOR R632-CFF (750,000 BTU) H-1154 H-1155 H-1154 FIRST STAGE HIGH PRESSURE REGULATOR FIXED TO REDUCE VAPOR SERVICE DOWN TO 10 PSI, FOR USE WITH SECOND STAGE REGULATOR. A-2973 A-2974 H-1155 SECOND STAGE LOW PRESSURE REGULATOR ADJUSTABLE INCHES WATER COLUMN. USE WITH HIGH PRESSURE FIRST STAGE REGULA- TOR. FIRST AND SECOND STAGE REGULATORS AND ADAPTERS PRESSURE RANGE MODEL - STYLE *H PSI FIXED 1/4" FPT INLET X 1/2" FPT OUTLET REGULATOR R312H HIGH PRESSURE H "- 13" WC 1/2" FPT INLET X 3/4" FPT OUTLET REGULATOR R622 LOW PRESSURE A /4" MPT X MPOL ADAPTER - A /4" MPT X NEW STYLE ACME ADAPTER - * H-1154 HIGH PRESSURE REGULATOR (POUNDS PER SQUARE INCH - VAPOR SERVICE) 684 A-3297 B-912 B-913 MAXITROL REGULATORS SEE PAGE 655 CONNECTORS FOR PORTABLE OUTDOOR EQUIPMENT A /4" MPT X MPOL PIGTAIL 20" LONG B-912 1/2" X 12FT HOSE KIT WITH MALE ENDS B-913 3/4" X 12FT HOSE KIT WITH MALE ENDS

47 THERMOCOUPLES JOHNSON PRODUCTS H-548, H-467 H-835 THERMOCOUPLE WITH JUNCTION BLOCK H " THERMOCOUPLE H " THERMOCOUPLE H-835 THERMOCOUPLE HEAVY DUTY THERMOCOUPLES ROBERTSHAW PRODUCTS PENN BASO H " K16BT-18 H " K16BT-24 H " K16BT-36 *H " K16RA-48 *H " K16RA-60 * NICKEL-PLATED (PIZZA OVENS) THERMOCOUPLES 1980 SNAP-FIT ROBERTSHAW THERMOCOUPLES 1970 UNI-COUPLE (WITH ZIP TIP) ROBERTSHAW *H H " H " H " H " H " H " H " * ASSORTED 10-PACK INCLUDES: 1-(18"), 4-(24"), 4-(36") AND 1-(48") H " H " H " H " H " H " H " HEAVY DUTY THERMOCOUPLES 1900 SERIES ROBERTSHAW H " H " H " H " International Commercial Supply Corp., LLC - Phone Fax

48 THERMOPILES H-1302 LEAD LENGTH H-1257 PILOT GENERATORS TERMINAL STYLE H-1258 H-1259 H " THERMOPILE H-1257 PG9 THERMOPILE 36" SPADES H-1258 ARMORED GENERATOR H " WITH PG9 ADAPTER H-966 HONEYWELL THERMOPILE TYPE COMMENT H-966 Q313 35" - 2 LEAD ARMORED ROBERTSHAW THERMOPILES TYPE H-229 H-906 A-1762 H-230 H-231 H-907 H LEAD WITH PG9 ADAPTER 32" H LEAD H " COAXIAL (SCREW IN) H LEAD WITH PG9 ADAPTER 60" H-907 COAXIAL (SCREW IN) A PG9 ADAPTER ONLY BJ FD THERMOSTATS - ROBERTSHAW BJ OR FD TYPE SEE PAGE

49 TOOLS TESTER AND ADAPTER N-107 THERMOCOUPLE TEST ADAPTER N-323 THERMOCOUPLE TESTER N-107 N-323 DRILL S N-146 N-147 DRILL SETS ACCESORIES N THRU 80 INCLUDES PLASTIC CASE, BTU ORIFICE CAPACITY CHART AND N-273 TAPERED BROACH FOR CLEANING ORIFICES N THRU 39 INCLUDES #19 THRU #39 DRILL PLUS.008" TO.012" PILOT ORIFICE DRILLS DRILL INDIVIDUAL DRILLS DRILL DRILL DRILL N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N NOTE: FOR ADDITIONAL TOOLS FOR USE SEE TOOLS SECTION PAGE International Commercial Supply Corp., LLC - Phone Fax

50 TUBING AND PILOT HEADS A-1235 A-2382 A-1233 A-1234 A-2796 PILOT HEADS AND STEEL TUBING A-1235 PILOT HEAD FOR 3/16" COMPRESSION TUBING A-2382 PILOT HEAD FOR 1/4" COMPRESSION TUBING A-2796 STEEL PILOT TUBING 1/8" X 36" LONG A-1233 STEEL PILOT TUBING 3/16" X 36" LONG A-1234 STEEL PILOT TUBING 1/4" X 36" LONG H-529 UNIVERSAL PILOT TUBE H-529 3/16" TUBE X 18" LONG NOTE: ALL STEEL CONSTRUCTION ALUMINUM TUBING (50 FT COILS) A-832 1/8" A-833 3/16" A-834 1/4" A-835 5/16" A-836 3/8" A-837 7/16" 688

51 H-969 HONEYWELL H-932 H-233 H-509 ROBERTSHAW H-898 H-1256 WHITE RODGERS VALVES-CONTROL VALVES - HONEYWELL SEE PAGE 652 ROBERTSHAW SEE PAGE 659 WHITE RODGERS SEE PAGE 665 H-893 H-656 BASO H-341 WHITE RODGERS H-888 H-335 H-207 ROBERTSHAW VALVES-SAFETY VALVES - BASO SEE PAGE 647 ROBERTSHAW SEE PAGE 658 WHITE RODGERS SEE PAGE 665 International Commercial Supply Corp., LLC - Phone Fax

52 VALVES - VALVES H-251, H-468 H-728, H-838 H-971 H-972 H-1343 H-836 H-975 H-730 H-340, H-674 H-1055, H-1059 H-675, H-676 H-1365 A-3969 H-970 A-3465 H-814 H-1394 H-334 VALVES CTR INLET TO END STEM STEM H-251 2" H /2" H-971 2" FLAT DOWN VALVE WITH ADJUSTABLE HOOD H /2" H /4" 1/8" MPT INLET H-836 2" FLAT UP H /4" VALVE - LESS HOOD H-728 2" HI/LOW VALVE H /8" PUSH TO TURN VALVE H /2" 1/4" MPT INLET VALVE - LESS HOOD FLAT DOWN H-674 1/8" MPT X 1/4" CC H-340 1/8" MPT X 5/16" CC 2" H-675 1/8" MPT X 3/8" CC TUBING OUTLET VALVE H-676 1/8" MPT X 7/16" CC H /4" MPT X 1/2" CC 3" H /4" MPT X 7/16" CC FLAT DOWN TUBING OUTLET VALVE H /8" 1/2" MPT X 1/2" MPT HEAVY DUTY VALVE - 1 PIECE STEM A HANDLE FOR H-1365 VALVE H /8" 1/2" MPT X 1/2" MPT - HEAVY DUTY VALVE - 2 PIECE STEM A HANDLE FOR H-970 VALVE - H-814 1/8" MPT X 7/16" ORIFICE CHROME PLATED ON-OFF VALVE H " 1/8" MPT FLAT DOWN HI/LOW - TURN FOR INFINITE ADJUSTMENT H-334-1/8" MPT X 3/8" FPT HANDLE SHUT OFF VALVE NOTE: IF INSUFFICIENT SWIVEL CLEARANCE IS EXPERIENCED DURING INSTALLATION, REMOVE ANY OBSTRUCTING COMPONENT TO GAIN CLEARANCE. IT IS NOT RECOMMENDED THAT THESE VALVES BE DISASSEMBLED. 690

53 VALVES - PILOT VALVES AND SERVICE VALVES H-527 H-528 H-1007 H-644 H-890 H-729 H-1067 H-1344 H-1345 ADJUSTABLE PILOT VALVES STYLE H /8" NPT X 1/8" TUBE H-527 1/8" NPT X 3/16" TUBE SINGLE STRAIGHT H-528 1/8" NPT X 1/4" TUBE H-644 H-729 H /8" NPT X 3/16" TUBE 1/8" NPT X 3/16" TUBE 3/16" TUBE X 3/16" TUBE H-890 H-1067 H /8" NPT X 1/4" TUBE 1/8" NPT X 1/4" TUBE 1/4" TUBE X 1/4" TUBE SINGLE 90º ANGLE TWIN STRAIGHT STRAIGHT COUPLING WITH ADJUSTMENT SERVICE COCKS H-416 1/2" FPT H-417 3/4" FPT BALL VALVES H-605 3/8" FPT H-606 1/2" FPT H-607 3/4" FPT H-608 1" FPT International Commercial Supply Corp., LLC - Phone Fax

54 VALVES - SOLENOID VALVES ASCO PRODUCTS SOLENOID VALVES PIPE COIL VOLTAGE H /2" H /4" H /8" H /2" H /4" BASO PRODUCTS H-1010 H-1076 H-1206 H-1294 SOLENOID VALVES VOLTAGE H /8" H H H /2" H-359A 120 H-360A 3/4" H-359A H-360A ROBERTSHAW PRODUCTS H-444 H-549 H-1102 H V SOLENOID VALVE AND COILS COMMENTS H-444 3/8" NEW STYLE VALVE W/ITH BLACK COIL H-549 OLD STYLE WHITE COIL ONLY (.10 AMP) H OLD STYLE RED COIL ONLY (.13 AMP) H-1322 NEW STYLE BLACK COIL ONLY 692