NC Self-Clinching Nuts
|
|
- Clement Melton
- 5 years ago
- Views:
Transcription
1 NC Self-Clinching Nuts Features Provide load-bearing threads in thin sheets. vailable in a broad selection of inch and metric thread sizes. Self-clinching design provides quick and permanent installation in a variety of aluminum and cold-rolled steel sheet thicknesses. Choice of RoHS-compliant materials and finishes. UPDTED 09/22/16 Now with Installation and Performance Information Description Example NCCT 440 Z C Finish T E (Dimensions are Shown on Pages 2 thru 5) Before Installation Installed metal displaced by the knurled band during installation flows into the undercut creating a mechanical lock with the sheet metal providing high push-out and torque-out resistance. PF-NC 09/22/16 (1)
2 GENERL - s CT, ST & SS ll dimensions in inches Thickness Hole Size Distance Hole Center to Edge C E ±.010 T ± (1) For best performance, use the maximum shank length available for the application sheet thickness. (2) Custom sizes available by request PF-NC 09/22/16 (2)
3 GENERL - s CT, ST & SS (CONTINUED) Thickness Hole Size Distance Hole Center to Edge C ll dimensions in inches E ±.010 T ± / / / / / / / / / (1) For best performance, use the maximum shank length available for the application sheet thickness. (2) Custom sizes available by request PF-NC 09/22/16 (3)
4 GENERL - s CT, ST & SS (CONTINUED) Thickness Hole Size Distance Hole Center to Edge C ll dimensions in millimeters E ±0.25 T ±0.25 M2 x 0.4 M2 M2.5 x 0.45 M2.5 M3 x 0.5 M3 M3.5 x 0.6 M3.5 M4 x 0.7 M5 x 0.8 M6 x 1.0 M8 x 1.25 M10 x 1.5 M4 M5 M6 M8 M M12 x 1.75 M (1) For best performance, use the maximum shank length available for the application sheet thickness. (2) Custom sizes available by request. PF-NC 09/22/16 (4)
5 GENERL - L ll dimensions in inches Thickness Hole Size Distance Hole Center to Edge C E ±.010 T ± / ll dimensions in millimeters Thickness Hole Size Distance Hole Center to Edge C E ±0.25 T ±0.25 M2 x 0.4 M3 x 0.5 M2 M3 M3.5 x 0.6 M3.5 M4 x 0.7 M5 x 0.8 M4 M M6 x 1.0 M (1) For best performance, use the maximum shank length available for the application sheet thickness. (2) Custom sizes available by request. PF-NC 09/22/16 (5)
6 and finish For Use in Hardness Description Finish Finish Description HRB 80 HRB 70 HRB 50 CT (1) Heat Treated Carbon Z Zinc (SC1) with Type III Clear Chromate per STM B 633 ST (1) Heat Treated Carbon Z Zinc (SC1) with Type III Clear Chromate per STM B 633 SS 300 Series Stainless P Passivated and/or tested per STM 967 L PLN Plain (1) Use CT material code for nuts with (E) body diameters.250 thru.440 and 6.35mm thru 11.18mm; and ST material code for nuts with (E) body diameters.500 thru.810, 12.70mm, 17.35mm and 20.57mm. (2) Custom materials and finishes available by request. INSTLLTION 1. Prepare correct sized mounting hole in sheet away from bends or other highly cold-worked areas. Do not deburr hole edges. 2. Insert nut into anvil recess or over anvil pin, depending on anvil type required. Place sheet hole over the nut shank as shown with hole punch side of sheet against the nut. 3. Squeeze the sheet and nut between parallel anvil and punch surfaces. Use only enough pressure to seat the nut shoulder flush with the sheet. nvils and punches may be ordered using the part numbers shown in the tables on pages 7 and 8; or made from hardened tool steel. 4. In the application install screw from the shank side of the fastener so that the head side of the nut is drawn toward the sheet. Punch Punch P Counterbore-Style nvil for Sizes 2-56 thru 5/16 and M2 thru M8 nvil Recommended nvil Dimensions P Pin-Style nvil for Sizes 3/8, 7/16, 1/2, M10 & M12 nvil PF-NC 09/22/16 (6)
7 anvil and punch dimensions - s CT, ST & SS nvil Dimensions ±.002 P ±.005 nvil Punch 256 / 348 / TL1378 TL TL1379 TL TL1380 TL / TL1381 TL TL1382 TL / TL1383 TL / TL1384 TL / TL1385 TL TL1386 TL / TL1387 TL1696 ll dimensions in inches nvil Dimensions ±0.05 P ±0.13 nvil Punch M2 / M2.5 / M TL1378 TL1695 M TL1379 TL1695 M TL1380 TL1695 M TL1381 TL1695 M TL1383 TL1695 M TL1384 TL1695 M TL1388 TL1696 M TL1387 TL1696 ll dimensions in millimeters PF-NC 09/22/16 (7)
8 anvil and punch dimensions - L nvil Dimensions ±.002 P ±.005 nvil Punch 256 / TL1378 TL TL1379 TL TL1380 TL / TL1684 TL TL1383 TL1695 ll dimensions in inches nvil Dimensions ±0.05 P ±0.13 nvil Punch M2 / M TL1378 TL1695 M TL1379 TL1695 M TL1380 TL1695 M TL1684 TL1695 M TL1383 TL1695 ll dimensions in millimeters PENCOM carries a wide assortment of screw and washer assemblies and components (top). Need vibration resistance? variety of thread locking materials can be applied to the threads. Nylon (bottom), micro-encapsulated epoxy and other locking elements are recommended to prevent loosening due to vibration. Contact a PENCOM ccount Manager or visit for more information. PF-NC 09/22/16 (8)
9 PERFORMNCE - s CT, ST & SS Test Installation (lbs) Push-out (lbs) Torque-out (in-lbs) (1) Performance data are reference averages based on commonly reported industry values when all installation specifications are strictly followed. Variations in panel hole size, thickness, material, and installation method will affect the loads. PENCOM strongly encourages testing in the application. PF-NC 09/22/16 (9)
10 PERFORMNCE - s CT, ST & SS (Continued) Test Installation (lbs) Push-out (lbs) Torque-out (in-lbs) (1) Performance data are reference averages based on commonly reported industry values when all installation specifications are strictly followed. Variations in panel hole size, thickness, material, and installation method will affect the loads. PENCOM strongly encourages testing in the application. PF-NC 09/22/16 (10)
11 PERFORMNCE - s CT, ST & SS (continued) Test Installation (kn) Push-out (N) Torque-out (N-m) M2 M2.5 M3 M M M5 M (1) Performance data are reference averages based on commonly reported industry values when all installation specifications are strictly followed. Variations in panel hole size, thickness, material, and installation method will affect the loads. PENCOM strongly encourages testing in the application. PF-NC 09/22/16 (11)
12 PERFORMNCE - s CT, ST & SS (continued) Test Installation (kn) Push-out (N) Torque-out (N-m) M8 M M (1) Performance data are reference averages based on commonly reported industry values when all installation specifications are strictly followed. Variations in panel hole size, thickness, material, and installation method will affect the loads. PENCOM strongly encourages testing in the application. PERFORMNCE - L Test Installation (lbs) Push-out (lbs) Torque-out (in-lbs) (1) Performance data are reference averages based on commonly reported industry values when all installation specifications are strictly followed. Variations in panel hole size, thickness, material, and installation method will affect the loads. PENCOM strongly encourages testing in the application. PF-NC 09/22/16 (12)
13 PERFORMNCE - L (CONTINUED) Test Installation (kn) Push-out (N) Torque-out (N-m) M2 M M (1) Performance data are reference averages based on commonly reported industry values when all installation specifications are strictly followed. Variations in panel hole size, thickness, material, and installation method will affect the loads. PENCOM strongly encourages testing in the application. PF-NC 09/22/16 (13)
Flush Head Self Clinching Studs
SB Flush Head Self Clinching Studs Features Provide permanent male threads in sheets as thin as.040 (1.00mm). Ribbed self-clinching design mounts flush on the back of the sheet while transferring excellent
More informationNA/NAL. Self Clinching Floating Nuts. NA /NAL Self Clinching Floating Nuts
/L Self linching Floating uts Features Internal floating nut feature allows up to.030 (0.76mm) lateral adjustment to compensate for misalignment with mating fastener. Permanent installation in aluminum,
More informationSNAP-TOP STANDOFFS BULLETIN SSA 708 R E V. 409
SNAP-TOP STANDOFFS BULLETIN SSA 708 R E V. 409 SNAP-TOP STANDOFFS PEM SNAP-TOP Standoffs (s SSA, SSS, SSC, KSSB) are designed for permanent installation into metal panels or PC boards. These all-metal
More informationSHEET METAL FASTENERS
SHT MTAL FASTNRS Wherever you are... we have the solution! The P-FH / P-FHS SLF is a threaded fastener which incorporates a knurled platform under the head, which when embedded in the sheet, displaces
More informationCONCEALED-HEAD SELF-CLINCHING STUDS AND STANDOFFS BULLETIN
ONEED-HED SE-INHING STUDS ND STNDOS BUETIN H 813 R e v 814 ONEED-HED SE-INHING STUDS ND STNDOS PEM self-clinching concealed-head studs and standoffs install permanently in steel or aluminum sheets as thin
More informationSelf-Clinching Standoffs Series CFSO, CFSOS, CFSOA (Through Threads)
self-clinching standoffs are designed for quick, easy installation with any standard pneumatic, hydraulic or mechanical press. -threaded standoffs are used in metal panels with thickness of.040 in. (1.0
More informationSELF-CLINCHING STUDS AND PINS
SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the
More informationS E L F - C L I N C H I N G S T U D S A N D P I N S
S E L F - L I N I N G S T U D S A N D P I N S SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard
More informationPERFORMANCE DATA. Type FH and FHS Flush-Head Studs
PERFORMANCE DATA The pushout, torque-out, and pull thru values reported here pertain only to the holding power of the stud to the sheet into which it is installed. These values in no way pertain to the
More informationS ELF-CLINCHING S TANDOFFS. Revised 409 SO-1. PennEngineering
S EF-INING S TANDOFFS Revised 409 SO-1 SEF-INING STANDOFFS These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010
More informationATLAS FM FULL METRIC INSERTS CATALOG
TLS F FULL ETRI INSERTS TLOG 915 TLS F FULL ETRI LIND THREDED INSERTS TLS F metric blind threaded inserts offer ideal solutions for blind attachment applications where only one side of a panel is accessible
More informationHARRISON SILVERDALE LTD
FASTENERS FOR SHEET METAL Harrison Silverdale Harrison Silverdale has been supplying Industrial Fasteners since 1982. Over the years we have gained an enviable reputation for quality and reliability serving
More informationSELF-CLINCHING STANDOFFS BULLETIN
BUETIN SO 213 R e v 414 PEM self-clinching standoffs, which use the proven self-clinching design, provide ideal solutions for applications where mounting, spacing or stacking of panels, boards or components
More informationSpecifications are subject to change without notice. Not responsible for errors or omissions. Self-Clinching Fasteners
Specifications are subject to change without notice. Not responsible for errors or omissions. Self-Clinching Fasteners Table of Contents 2011 CPTIVE FSTENER SERIES ESCRIPTION PGE bout the Company / Product
More informationS ELF-CLINCHING S TANDOFFS
S EF-INING S TANOFFS SEF-INING STANOFFS These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin
More informationD8 DZUS PANEX Quarter-Turn Fasteners
392 DZUS ANEX Quarter-Turn Fasteners Studs Size 4 Studs: Steel, zinc plated plus chromate or chrome plated Bail cover: ABS, black H Head Styles - Tool Actuated Oval Slot Hex Recess hillips Recess 1.3 (.051)
More informationSI THREADED INSERTS FOR PLASTICS BULLETIN
SI THRDD INSRTS FOR PLSTIS BULLTIN SI 410 SI THRDD INSRTS FOR PLSTIS SI inserts are typically specified in applications where strong, durable metal threads are required in plastic material, especially
More informationBeam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
More informationSeries 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order
More informationTHREADED INSERTS FOR PLASTICS
Bulletin SI-1017 Rev 918 SI brand inserts employ press-in, molded-in, or heat/ultrasonic installation methods to provide strong, reusable, permanent threads in plastic. SI THRDD INSRTS FOR PLSTIS SI inserts
More informationPipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
More informationConnecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
More informationSHEET METAL FASTENERS
SHEET METAL FASTENERS The fasteners shown below feature attachment by mechanical means avoiding the damage and uncertainty often associated with weld nuts and studs allowing their use in pre-finished materials.
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
More informationAnother NEW and EXCITING solution from Metallics! Tired of searching for the right Air Handling Cable Ties? Here they are!
Metallics! Standard Mounting Hole Low Profile Air Handling Cable Ties (Plenum Rated) [ ] CONTRACTOR APPROVED Ideal Application: Air Handling Spaces, above drop ceilings and below raised flooring Meets
More informationKOENIG-expander CV PLUGS THE WORLD S LEADING SEALING SYSTEM
KOENIG-expander CV PLUGS THE WORLD S LEADING SEALING SYSTEM 2011 JOINED TO LAST. Table of Contents CV 143 - English Anodized Aluminum Sleeve, Stainless Steel Ball CV 163 - English Allodined Aluminum Sleeve,
More information5F Series. Miniature Stud Assemblies and Receptacles
5F Series. Miniature Stud ssemblies and Receptacles Features: Minimum stud head projection. Wide range of head styles. Variety of materials. Stud available with either retaining ring or snap-in grommet
More information2600/2700 Series. Determining the stud length number when using receptacle: Type 1 + 3* G = P + F. * For Type 3: G = 9,9 mm min.
Particular Features Max. tensile strength 1.330 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle designs. 2600 Series: Fillister head; 2700 Series:
More informationSeries 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
More information229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationElectrical Accessories
complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. -Line s surface raceways are
More informationSELF-CLINCHING STANDOFFS
SEF-INING STANOFFS Page 1 of 7 These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin sheet. PEM
More informationPIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables 2 40 4 44 MTERIL Unistrut pipe supports, unless
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationToolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
More informationAUTOMATIC TOOLING GUIDE FOR PEMSERTER SERIES 4 AUTOMATIC FEED PRESS
Page 1 of 9 This tooling guide references the automatic tooling available for the Series 4AF Press Nut Tooling for S & CLS S, CLS PEM Self-Clinching Nuts Unified and Metric Combined Size -0,-1,-2 Color
More informationThe obvious choice in piping cushion clamp assemblies since 1966
The obvious choice in piping clamp assemblies since 1966 TM INTRODUCTION ydra-zorb Co. has been the leader in the strut mounted clamp market for over 40 years, offering a wide variety of solutions when
More informationMechanical Force Gauges. Measure tension, compression or push/pull
Mechanical Force Gauges Measure tension, compression or push/pull Dillon Model X Mechanical Force Gauges Measure tension, compression and push/pull. Model X-C with compression calibration Model X-C comes
More informationHARRISON SILVERDALE LTD
FASTENERS FOR PLASTIC Harrison Silverdale Harrison Silverdale has been supplying Industrial Fasteners since 1982. Over the years we have gained an enviable reputation for quality and reliability serving
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
More informationBulletin # Mechanical Force Gauges
Bulletin #200.9 Mechanical Force Gauges Dillon Model X Mechanical Force Gauges Measure tension, compression, and push/pull. Model X-C with compression calibration Model X-C comes in eleven capacities ranging
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationRatcheting Pullers Reversible Puller Combination Pullers Slide Hammer Pullers Heavy Duty C-Clamps...
C L A M P I N G & P U L L I N G Ratcheting Pullers... 1137 Reversible Puller... 1139 Combination Pullers... 1139 Slide Hammer Pullers... 1139 Heavy Duty C-Clamps... 1141 General Service C-Clamps... 1142
More informationSwagelok Medium-Pressure, Gaugeable Tube Fit tings and Adapte r Fit tings
www.swagelok.com Swagelok Medium-Pressure, Gaugeable Fit tings and dapte r Fit tings For Pre s sure s up to 15 0 0 0 psig (1034 ba r) asy installation, no special tools required ssembly by one full turn
More informationForm 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationHinges. Truckline Inc. Call Us at Tel: HINGES 8-1. Truck & Trailer Body Parts Mfg. & Sales
` Hinges Aluminum Hinges Stainless Steel Hinges Galvanized Steel Hinges HINGES 8-1 DOOR Hinges TL-Hinge-22-00407 TL-Hinge-22-01047 TL-Hinge-22-01036 TL-Hinge-22-01046 TL-Hinge-22-01041 TL-Hinge-22-01043
More informationTubing Tools and Accessories
www.swagelok.com Tubing Tools and Accessories Products Electric, bench top, and hand tube benders preparation tools support systems 2 Tubing Tools and Accessories Contents Benders Electric.... 2 Benders
More informationSeries 1 Steel - Accessories
- ccessories Standard (L-Shaped) Splice Plates One pair including hardware provided with each section. Prepackaged in pairs in a plastic bag, with hardware. 4-hole pattern L-shaped splice plates. L-shaped
More informationLift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More informationModularity and simplicity in action. ÂÂ Cost effective, easy to design and install
84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationDoor thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
More information< INTRODUCE BONDED SEALS >
< INTRODUCE BONDED SEALS > ORIGINAL TYPE: The bonded seal was originally designed to replace copper type washers in higher pressure systems. Simple in construction the gasket comprises a metal annulus,
More informationTWIST DRILLS AND COUNTERBORES
TWIST DRILLS 827 TWIST DRILLS AND COUNTERBORES Twist drills are rotary end-cutting tools having one or more cutting lips and one or more straight or helical flutes for the passage of chips and cutting
More information4002 Series. Determing the stud length number when using receptacle: Type Type 3. G = P + F (8,9 min.) Release January 2009 G-1
Particular Features Max. tensile strength.00 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle design. Floating receptacles available. Selection Instructions
More informationCOMPRESSION COUPLINGS Exclusive Design Features Outer Shell and Bar Washer The unique design provides an equalized pressure seal.
1-800--1 The only economical couplings available to connect (or repair) threaded or unthreaded pipe or tubing of any size f rom 1/ thru including metric sizes and a rare oneof-a-kind size tubing. COMPRESSION
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationRuland. Carefully Made Shaft Collars and Couplings
Ruland Carefully Made Shaft Collars and Couplings Shaft Collars & RIGID couplings Shaft Collars from RULAND Ruland shaft collars are offered in multiple styles to fit shafts ranging from 1/8" to 6" in
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationMeeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto
Specialty tools Meeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto includes popular puller configurations,
More informationCUP POINT M3 - M16 15
INDEX TRIVALENT METRIC ZINC PLATED SOCKET SCREWS PAGE TECHNICAL INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M3 - M8 6 M10 - M24 7 TECHNICAL INFORMATION 8-9 M3 - M10 10 M12 - M24 11 TECHNICAL INFORMATION
More informationFord Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
More informationSize Grade Torque 9/ ft/lbs. 5/ ft/lbs. 3/ ft/lbs. 7/ ft/lbs ft/lbs.
Ford 150 5 1/2, 6 1/2 & 8 Boxes 4/16 HJ32003,Rev 2 BOlT TORQUE SPECIFICATIONS STANDARD BOlTS: Size Grade Torque 5/16 5 20 ft/lbs. 3/8 5 35 ft/lbs. 7/16 5 56 ft/lbs. 1/2 5 85 ft/lbs. Size Grade Torque 9/16
More informationLarge Flange - Provides greater bearing surface for fastening soft and brittle facing materials such as plywood and plastics including, vinyl, etc.
PANEL BLIND RIVETS PANEL BLIND RIVETS s: / IFI Grade 11 Steel Rivets: Plated Steel Rivet/Coated IFI Grade 30 Dome Head - Most popular for industrial applications. The low profile head diameter is twice
More informationCamcar Socket Screw Catalog
Camcar Socket Screw Catalog Effective April 1, 2017 Camcar Socket Screws Suior Socket Screw Products STANLEY Engineered Fastening is committed to offering a broad range of socket screw standard products
More informationCL Series Cable Ladders and Accessories EIA/TIA Compliant
96-986 / rev 8a / 09-20-10 CL Series Cable Ladders and ccessories EI/TI Compliant EXCEPTIONL SUPPORT & PROTECTION The CL Series fully welded heavy-duty cable ladders and accessories Features Ladder sections
More informationA l t r a I n d u s t r i a l M o t i o n. FBA Flywheel Couplings
A l t r a I n d u s t r i a l M o t i o n FBA Flywheel Couplings Guardian Couplings I FBA Flywheel Couplings TECHNICAL DATA The FBA (flywheel-blind assembly) was designed in response to the demand for
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
More informationAC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
More information08.20 VIC -300 MasterSeal Butterfly Valves
CRBON STEEL PIPE - GROOVED VLVES Vic -300 MasterSeal butterfly valves are designed for pressures ranging from full vacuum to 300 psi/2065 kpa and for bi-directional, dead end services to full working pressure.
More informationSection 9 Pins, Rings, Springs & Hooks
Section 9 Pins, Rings, Springs & Hooks Contents...Page # Springs...234 Ajax Wire...235 Tube Assortments...236 Springs...237-242 Retaining Rings...243 Basic External Retaining Rings...244 Retaining Rings...245
More informationAxial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
Brand S Nuts - Metric Mating Screw Recommended Tightening Torque, (N m) S-M2-0ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-1ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-2ZI 2.53 1220 0.15
More informationColorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
More informationMANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
More informationCIC 200 SLOTTED BINDING HEAD MACHINE SCREW ASSORTMENT
A15-1 TM CIC 200 SLOTTED BINDING HEAD MACHINE SCREW ASSORTMENT P/N 7705 Precision, burr-freethreads for exact fit Special chromate plating resists rust and corrosion for easier removal 1180 6-32 x 1/2
More informationApex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials.
pex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. Responsive service for all your fastener tool needs. Made in the U.S.. since 1933. The
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationFLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is
More informationCollet Chucks and Collets
ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16
More informationQUICK OPERATING 1/4-TURN FASTENERS
50F Series. General Purpose Stud Assemblies and Receptacles Features: Designed for use in agricultural, industrial, and similar environments where a simplified rugged design is desired. Studs are retained
More informationare widely used because they provide a standardized surface for testing.
Steel Panels Steel panels are made from standard low-carbon, cold-rolled steel complying with ASTM A1008, A-109 and QQS- 698. Smooth Finish Steel Panels, Type QD have a smooth, bright finish produced at
More informationAC Single Point Actuator
130 AC Single Point Actuator T-handle Surface mount installation Generous grip area Pull to activate Cable clip 20.8 (.82) 21.7 (.85) 23 (.91) Housing: PC/ABS, black T-handle and slide: 33% glass-filled
More informationThermocouples. General Applications Tube and Wire. Thermal Devices, Inc. Mount Airy, Maryland USA
Watlow is a world class supplier of temperature measurement products, with more than 90 years of manufacturing, research and design expertise. Companies engaged in critical process control of food and
More informationPIPE NIPPLES. Welded Pipe Nipples - Black & Galvanized. q Approved q Approved as noted q Not approved. Standard Schedule 40, XH Schedule 80
Welded Nipples - Black & Galvanized Standard Schedule 40, XH Schedule 80 q FIG. 9: Standard Black Schedule 40 q FIG. 8: Extra Heavy Black Schedule 80 q FIG. 4: Standard Galv. Schedule 40 q FIG. 42: Extra
More informationThermocouples. General Applications Tube and Wire. Performance Capabilities. Features and Benefits. Typical Applications. Construction and Tolerances
Watlow is a world class supplier of temperature measurement products, with more than 90 years of manufacturing, research and design expertise. Companies engaged in critical process control of food and
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationAssortment 2013_FPT BOOK.indb /02/13 6:57 PM
Assortment Contents Why compete against your supplier when you can be our partner Chain Tensioners...14 see Chains section for details Anti-Vibration Mounts...224 Key Steel...225 Motor Rails...226 Self
More informationClamps. for Plastic Tubing & Hose. Fluid Transfer Specialists
Clamps for Plastic Tubing & Hose Fluid Transfer Specialists Oetiker Clamps Ear Type Clamps Oetiker ear type clamps breathe and adapt to the expansion and contraction of hose affected by thermodynamics
More informationFIG Gruvlok Flange Adapter
FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method
More informationFIG Gruvlok Flanges
Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More informationApplication Tooling Specification
Order No. 200218-0400 Application Tooling Specification Type 4A FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles
More informationSELF-TAPPING & THREAD-CUTTING SCREWS STEEL
& SCREWS STEEL - and - STAINLESS STEEL ZINC Undercut Oval Phillips Flat Slotted Round Slotted Hex Slotted Hex Unslotted Hex Washer Phillips Standard Serrated Standard Serrated Flat Six-Lobe Zinc Flat Six-Lobe
More informationThermocouples W A T L O W
W A T L O W Over 90 years of manufacturing, research and design makes Watlow a world class supplier of temperature measurement products. We have designed and manufactured millions of thermocouples for
More information> Continuous > Butt > Specialty
> Continuous > Butt > Specialty CONTENTS 6 Hinge Nomenclature 8 Continuous Hinges 14 316 STS Hinges 14 Electrogalvanized Hinges 14 Raw Brass 14 Polished Stainless w/holes 15 Preplated Steel w/holes 15
More information