SELF-CLINCHING STANDOFFS
|
|
|
- Adela Fisher
- 5 years ago
- Views:
Transcription
1 SEF-INING STANOFFS Page 1 of 7 These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin sheet. PEM brand standoffs are installed with their heads flush with one surface of the mounting sheet. When blind-threaded types are used, outer sheet surfaces are not only flush, but closed as well. Unthreaded standoffs are also available for spacing multi-panel assemblies. imensions: Unified imensions shown in inches. Where tolerances are not indicated, standard tolerances are ±.01 in. for two-place decimals and ±.005 in. for three-place decimals. Metric imensions shown in millimeters. Where tolerances are not indicated, standard tolerances are ± 0.25 mm for one-place decimals and ± 0.13 mm for two-place decimals. PEM self-clinching standoffs are also available on special order in nonheat treated carbon steel as type SON (thru-hole threaded) or SON (blind threaded). TSO, TSOS, and TSOA self-clinching threaded standoffs provide permanent threads in sheets as thin as.025 / 0.63 mm. If you require a standoff which we do not offer in this bulletin, please contact us. We will be happy to work with you to satisfy your special need. Part Number esignation SO ZI For other types of PEM brand standoffs and spacers see: ulletin ulletin K ulletin SK ulletin SSA PEM oncealed-head Standoffs. PEM Standoffs for printed circuit boards. PEM KEYOE Standoffs. PEM brand SNAP-TOP Standoffs. and Material ode ength ode Finish ode 1997 Penn Engineering & Manufacturing orp. PENN ENGINEERING & MANUFATURING ORP. ANORO, PA PONE: FAX:
2 TYPES SO, SON, SOA, SOS TRU-OE TREAE STANOFFS Page 2 of 7 (All dimensions are in inches) ode ole Size In ounter ore ia ±.005 GENERA IMENSIONA ATA ole / Nom / / / / / /16.31 TREA SIZE AN ENGT SEETION ATA ength (ength ode in 32nds of an inch) Size Stainless Alumi- ode Non eat-treated num (#4-40) 6440 (1) (#6-32) 8632 (1) (#8-32) (#10-32) imension ±.010 None (1) Standoffs with thread codes 6440 and 8632 offer greater wall thickness for thread sizes 440 and 632, respectively Not Available. PROUT AVAIAIITY TAE SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SOS SO SO SO SO SO SO SO SOS SO SOS SO SOS SO SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOA SOS SOS SOS SOA SOS SOS SOA SOS SOA SOA SOA SOS SOA SOA SOA SOA SOA SOA Penn Engineering & Manufacturing orp. PENN ENGINEERING & MANUFATURING ORP. ANORO, PA PONE: FAX:
3 Page 3 of 7 TYPES SO, SON, SOA, SOS TRU-OE, TREAE STANOFFS METRI (All dimensions are in millimeters) GENERA IMENSIONA ATA METRI ode ole Size ounter- In ole / ore ia Nom ±0.13 M M M M M TREA SIZE AN ENGT SEETION ATA METRI ength Size x Stainless Alumi- ode (ength ode in millimeters) Pitch Non eat-treated num M3 X 0.5 M3 3.5M3 (1) M3.5 X 0.6 M3.5 M4 X 0.7 M M5 X 0.8 M5 imension ±0.25 None (1) Standoffs with thread codes 3.5M3 offer greater wall thickness for M3 thread size. Not Available. PROUT AVAIAIITY TAE METRI M3 3.5M3 M4 SO SO SO SO-M3-3 SO-3.5M3-4 SO-M4-3 SO-M3-4 SO-3.5M3-6 SO-M4-4 SO-M3-6 SO-3.5M3-8 SO-M4-6 SO-M3-8 SO-3.5M3-10 SO-M4-8 SO-M3-10 SO-3.5M3-12 SO-M4-10 SO-M3-12 SO-3.5M3-14 SO-M4-12 SOS SOS SOS SOS-M3-3 SOS-3.5M3-4 SOS-M4-3 SOS-M3-4 SOS-3.5M3-6 SOS-M4-4 SOS-M3-6 SOS-3.5M3-8 SOS-M4-6 SOS-M3-8 SOS-3.5M3-10 SOS-M4-8 SOS-M3-10 SOS-3.5M3-12 SOS-M4-10 SOS-M3-12 SOS-3.5M3-14 SOS-M4-14 SOS-M3-14 SOS-3.5M Penn Engineering & Manufacturing orp. PENN ENGINEERING & MANUFATURING ORP. ANORO, PA PONE: FAX:
4 TYPES SO, SON, SOA, SOS IN TREAE STANOFFS Page 4 of 7 (All dimensions are in inches) GENERA IMENSIONA ATA F ode ole Size In ole / Nom / / / / / /16.31 TREA SIZE AN ENGT SEETION ATA Size Non eat-treated Stainless Aluminum ode (#4-40) (#6-32) (#8-32) (#10-32) SO SO SON SON SOS SOS SOA SOA SO SON SOS SOA (1) (1) ength (ength ode in 32nds of an inch) F imension (1) Standoffs with thread codes 6440 and 8632 offer greater wall thickness for thread sizes 440 and 632, respectively. PROUT AVAIAIITY TAE SOS SOS SO SOS SOS SOS SO SO SOS SOS SOS SO SO SOS SOS SOS SO SO SOS SOS SOS SO SO SOS SOS SOS SO SO SOS SOS SOS SO SO SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOS SOA SOS SOS SOA SOS SOS SOA SOA SOA SOA SOA SOA SOA SOA SOA Penn Engineering & Manufacturing orp. PENN ENGINEERING & MANUFATURING ORP. ANORO, PA PONE: FAX:
5 TYPES SO, SON, SOA, SOS IN TREAE STANOFFS METRI Page 5 of 7 (All dimensions are in millimeters) F METRI GENERA IMENSIONA ATA ole Size ode In Nom. ole / M M M M M TREA SIZE AN ENGT SEETION ATA ength Size x Stainless Alumi- ode (ength ode in millimeters) Pitch Non eat-treated num METRI M3 X 0.5 SO SON SOS SOA M3 3.5M3 (1) M3.5 X 0.6 M3.5 M4 X 0.7 SO SON SOS SOA M M5 X 0.8 M5 F imension (1) Standoffs with thread codes 3.5M3 offer greater wall thickness for M3 thread size. PROUT AVAIAIITY TAE METRI M3 3.5M3 M4 SOS SOS SO SOS-M3-8 SOS-3.5M3-8 SO-M4-10 SOS-M3-10 SOS-3.5M3-10 SO-M4-12 SOS-M3-12 SOS-3.5M3-12 SO-M4-14 SOS-M3-14 SOS-3.5M3-14 SOS-M3-16 SOS-3.5M3-18 SOS SOS-M3-18 SOS-3.5M3-20 SOS-M3-20 SOS-3.5M3-25 SOS-M4-10 SOS-M4-12 SOS-M Penn Engineering & Manufacturing orp. PENN ENGINEERING & MANUFATURING ORP. ANORO, PA PONE: FAX:
6 TYPES SO, SON, SOA, SOS TRU-OE UNTREAE STANOFFS AN METRI ode ole Size In GENERA IMENSIONA ATA ole / Nom / / / / / / Page 6 of 7 PEM thru-hole, unthreaded standoffs are available on special order only. METRI ole Size In Nom. ole / ode TRU-OE IAMETER AN ENGT SEETION ATA ength (ength ode in 32nds of an inch) iameter Stainless Alumi ode Non eat-treated num (1) (1) METRI ength iameter Stainless Alumi- (ength ode in millimeters) ode Non eat-treated num 3.1 S0 SON SOS SOA (1) (1) (1) Standoffs with thru-hole codes 6116, 8143, 63.1 and 83.6 offer greater wall thickness for that thru-hole diameter Penn Engineering & Manufacturing orp. PENN ENGINEERING & MANUFATURING ORP. ANORO, PA PONE: FAX:
7 TYPES TSO, TSOS, TSOA TREAE STANOFFS FOR SEETS AS TIN AS.025 / 0.63 mm Style #1 Style #2 ode ole Size In GENERA IMENSIONA ATA epth Nom. ole / Page 7 of 7 Style #3 METRI ole Size ode In ole / Nom epth M M M M M TREA SIZE AN ENGT SEETION ATA ength ±.003 For other lengths / thread depth data see chart below. Size Stainless Aluminum ode ength ode (ength without decimal point) TSO TSOS TSOA (#2-56) (1) 125 (1) 187 (1) 250 (1) 312 (2) 375 (2) 437 (3) 500 (3) 562 (3) 625 (3) 687 (3) 750 (3) TSO TSOS TSOA (#4-40) (1) 125 (1) 187 (1) 250 (1) 312 (2) 375 (2) 437 (2) 500 (3) 562 (3) 625 (3) 687 (3) 750 (3) (#6-32) TSO TSOS TSOA 632 NA 125 (1) 187 (1) 250 (1) 312 (1) 375 (2) 437 (2) 500 (2) 562 (3) 625 (3) 687 (3) 750 (3) METRI Size x Pitch M2.5 X 0.45 TSO TSOS TSOA M3 X 0.5 TSO TSOS TSOA ength ±0.08 For other lengths / thread depth data see chart below. Stainless Aluminum ode ength ode (ength without decimal point) M25 6M25 M3 6M3 200 (1) 300 (1) 400 (1) 600 (1) 800 (2) 1000 (3) 1200 (3) 1400 (3) 1600 (3) 1800 (3) 1900 (3) 200 (1) 300 (1) 400 (1) 600 (1) 800 (2) 1000 (2) 1200 (3) 1400 (3) 1600 (3) 1800 (3) 1900 (3) M3.5 X 0.6 TSO TSOS TSOA M35 NA 300 (1) 400 (1) 600 (1) 800 (1) 1000 (2) 1200 (2) 1400 (3) 1600 (3) 1800 (3) 1900 (3) (1) Style #1. (2) Style #2. (3) Style #3. Not Available. ENGT / STYE ATA (ength can be specified in.001 increments.) ength ength ength ode (Style) (Style) (Style) (Style #1) (Style #2) (Style #3) (Style #1) (Style #2) (Style #3) (Style #1) (Style #2) (Style #3) (ength can be specified in.02 mm increments.) METRI ength ength ength ode (Style) (Style) (Style) M M25 (Style #1) (Style #2) (Style #3) M M3 (Style #1) (Style #2) (Style #3) M (Style #1) (Style #2) (Style #3) 1997 Penn Engineering & Manufacturing orp. PENN ENGINEERING & MANUFATURING ORP. ANORO, PA PONE: FAX:
S ELF-CLINCHING S TANDOFFS
S EF-INING S TANOFFS SEF-INING STANOFFS These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin
S ELF-CLINCHING S TANDOFFS. Revised 409 SO-1. PennEngineering
S EF-INING S TANDOFFS Revised 409 SO-1 SEF-INING STANDOFFS These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted
SELF-CLINCHING STANDOFFS BULLETIN
BUETIN SO 213 R e v 414 PEM self-clinching standoffs, which use the proven self-clinching design, provide ideal solutions for applications where mounting, spacing or stacking of panels, boards or components
SNAP-TOP STANDOFFS BULLETIN SSA 708 R E V. 409
SNAP-TOP STANDOFFS BULLETIN SSA 708 R E V. 409 SNAP-TOP STANDOFFS PEM SNAP-TOP Standoffs (s SSA, SSS, SSC, KSSB) are designed for permanent installation into metal panels or PC boards. These all-metal
CONCEALED-HEAD SELF-CLINCHING STUDS AND STANDOFFS BULLETIN
ONEED-HED SE-INHING STUDS ND STNDOS BUETIN H 813 R e v 814 ONEED-HED SE-INHING STUDS ND STNDOS PEM self-clinching concealed-head studs and standoffs install permanently in steel or aluminum sheets as thin
SELF-CLINCHING STUDS AND PINS
SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the
Self-Clinching Standoffs Series CFSO, CFSOS, CFSOA (Through Threads)
self-clinching standoffs are designed for quick, easy installation with any standard pneumatic, hydraulic or mechanical press. -threaded standoffs are used in metal panels with thickness of.040 in. (1.0
S E L F - C L I N C H I N G S T U D S A N D P I N S
S E L F - L I N I N G S T U D S A N D P I N S SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard
AUTOMATIC TOOLING GUIDE FOR PEMSERTER SERIES 4 AUTOMATIC FEED PRESS
Page 1 of 9 This tooling guide references the automatic tooling available for the Series 4AF Press Nut Tooling for S & CLS S, CLS PEM Self-Clinching Nuts Unified and Metric Combined Size -0,-1,-2 Color
NC Self-Clinching Nuts
NC Self-Clinching Nuts Features Provide load-bearing threads in thin sheets. vailable in a broad selection of inch and metric thread sizes. Self-clinching design provides quick and permanent installation
SHEET METAL FASTENERS
SHEET METAL FASTENERS The fasteners shown below feature attachment by mechanical means avoiding the damage and uncertainty often associated with weld nuts and studs allowing their use in pre-finished materials.
Specifications are subject to change without notice. Not responsible for errors or omissions. Self-Clinching Fasteners
Specifications are subject to change without notice. Not responsible for errors or omissions. Self-Clinching Fasteners Table of Contents 2011 CPTIVE FSTENER SERIES ESCRIPTION PGE bout the Company / Product
Piston Seal OE Profile
Seal, PTFE ap Seal atalog EPS 530/US The Parker OE profile is a bi-directional piston seal for use in low to medium duty hydraulic applications. The OE profile is a two piece design comprised of a standard
Flush Head Self Clinching Studs
SB Flush Head Self Clinching Studs Features Provide permanent male threads in sheets as thin as.040 (1.00mm). Ribbed self-clinching design mounts flush on the back of the sheet while transferring excellent
Wirewound Resistors, Industrial Power, Tubular, Ribwound (RB), Fixed (RBEF, RBSF)
REF, RSF Wirewound Resistors, Industrial Power, Tubular, Ribwound (R), Fixed (REF, RSF) FETURES High temperature silicone or vitreous enamel coatings Excellent for pulsing applications ll welded construction
E and VE Construction
E and VE Construction E Element VE Element Type E and VE elements combine rugged design and rigid construction features which make them ideal for moderate to heavy duty clutch and brake service. They are
L & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
Disconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494
Technical ata isconnect Switch and ircuit reaker Mechanism Specifications ulletin Number 1494 Topic Page 1494U isconnect Switch Specifications 2 1494, 1494F, 1494G, 1494R, 1494V isconnect Switch Specifications
LSM SFM. METRIC SPECIFICATIONS and TECHNICAL INFORMATION
Metric Bushings Specifications M is for Metric RCM LSM SFM SFXM LM PM HM HLM SPM NM SCM FGM HGM SPECIFICATIONS and TECHNICAL INFORMATION BUSHING INFORMATION Application Information is listed on the specific
SHEET METAL FASTENERS
SHT MTAL FASTNRS Wherever you are... we have the solution! The P-FH / P-FHS SLF is a threaded fastener which incorporates a knurled platform under the head, which when embedded in the sheet, displaces
SI THREADED INSERTS FOR PLASTICS BULLETIN
SI THRDD INSRTS FOR PLSTIS BULLTIN SI 410 SI THRDD INSRTS FOR PLSTIS SI inserts are typically specified in applications where strong, durable metal threads are required in plastic material, especially
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
Stock QD Bushings. DISMOUNTING 1. Remove pull-up bolts and screw them into TAPPED holes in sheave or sprocket and against flange of QD bushing to
Stock Q s MOUNTING ROCEURE Q USHINGS IMORTANT E SURE TAERE CONE SURFACES OF Q USHING AN INSIE OF SHEAVE OR SROCKET HU ARE RY AN FREE OF ALL FOREIGN SUSTANCES SUCH AS AINT, GREASE, OR IRT. STANAR MOUNTING
THREADED INSERTS FOR PLASTICS
Bulletin SI-1017 Rev 918 SI brand inserts employ press-in, molded-in, or heat/ultrasonic installation methods to provide strong, reusable, permanent threads in plastic. SI THRDD INSRTS FOR PLSTIS SI inserts
1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
PARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
FLANGES FLANGES.
FANGES FANGES 26 Available Materials Stainless Steel A182 F304/, 304 F310, 310 F316/, 316 F317/ F321/ F347/ F51 F53 F904 F44 (254SMO) Duplex & Super Duplex A182 F51, F53, F55, F60 Nickel-base Alloy Alloy200,
SIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
Axial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
Brand S Nuts - Unified S-256-0ZI 665 180 2.6 2.9 4.1 5.8 7.3 S-256-1ZI 665 180 2.7 3.1 4.4 6.2 7.7 S-256-2ZI 665 180 2.7 3.1 4.4 6.2 7.7 S-348-0ZI 800 180 3.8 4.3 6.1 8.6 11 S-348-1ZI 875 180 4.1 4.7 6.6
HARRISON SILVERDALE LTD
FASTENERS FOR SHEET METAL Harrison Silverdale Harrison Silverdale has been supplying Industrial Fasteners since 1982. Over the years we have gained an enviable reputation for quality and reliability serving
D8 DZUS PANEX Quarter-Turn Fasteners
392 DZUS ANEX Quarter-Turn Fasteners Studs Size 4 Studs: Steel, zinc plated plus chromate or chrome plated Bail cover: ABS, black H Head Styles - Tool Actuated Oval Slot Hex Recess hillips Recess 1.3 (.051)
Piston Seal CQ Profile
Q Profile Q Profile, Premium PTFE ap with nti-rift Technology atalog EPS 530/US The Parker Q profile is a bi-directional piston seal for use in medium to heavy duty hydraulic applications. The Q profile
EB Series Electro Brake
Shaft Mounted Brakes for Power-On Applications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
Unimotor hd 230 V 460 V Unimotor hd 230 V 460 V Compact, Powerful High Dynamic AC Servo Motors
Unimotor hd 230 V 460 V Unimotor hd 230 V 460 V Compact, owerful igh ynamic AC Servo Motors Compact, owerful igh ynamic AC Servo Motors esigned for maximum torque density, the Unimotor hd brushless AC
SRB Series. UL Recognized CSA Certified VDE Approved* Specifications. SRB Series. Power Inlet Filters & Power Entry Modules
orcom Product Guide atalog: 161 Issue ate: 6.11 Minimum epth, ost-effective Shielded Power Inlet Filter SR Series UL Recognized S ertified V pproved* SRP SRS8 SR1 SR2 SR Series Smallest depth orcom RFI
SB4 & SB6 SERIES GOLD LINE SIDE-BY-SIDE SHOT PINS
ISO 9001 REGISTERE SB4 & SB6 SERIES GOL LINE SIE-BY-SIE SHOT PINS CORROSION & WEL SPATTER RESISTANT RAM MOUNTING FOR CYLINICATOR STYLE SWITCHES (NOT INCLUE) NAAMS STANAR MOUNTING NPT or G S LIGHTWEIGHT
Threadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
Axial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
Brand S Nuts - Metric Mating Screw Recommended Tightening Torque, (N m) S-M2-0ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-1ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-2ZI 2.53 1220 0.15
THREADED INSERTS.
www.jergensinc.com 10 Bolster Plate Bushings... 10.5 Installation and Removal Instructions... 10.2 Internal Locking Thread Repair Insert... 10.8-10.9 Keylocking, Extra Heavy Duty Industrial Style... 10.6
Section S. weight tables
Section S weight tables steel bars Rounds... 2-3 Squares... 3 Hexagons... 4 Octagons... 4 Flats... 5-8 Steel circles... 9-10 Steel and Aluminum weight formulas... 11 Bars, Tubing, Circles, Rings Weight
Marson Rivets, Rivet Nuts and Installation Tools
Marson Rivets, Rivet Nuts and Installation Tools Table of Contents Arconic Fastening Systems (AFS) offers the broadest line of blind fasteners in the industry. The breadth of the line is supported by the
AWN SERIES AWN IP67 HEATSINK ALUMINIUM ENCLOSURE NEW SIZE RELEASED FEATURE. Technical data. N type Components. E type Components
AN SERIES NE SIZE RELEASE Technical data Protection class IP67 Operating temperature -40 C ~ +105 C Maximum torque 1.0N m (10kgf cm) AN IP67 EATSINK ALUMINIUM ENCLOSURE FEATURE Functional aluminium enclosure
PV STYLE LEAD SCREW NUTS
PV STYE E SCREW NUTS For Use With PS Series ead Screws NUT SPECIFICTIONS Material: Polyacetal with lubricating additive Tensile Strength: 9,700 PSI at 73 O F Shear Strength: 9,500 PSI at 73 O F SYSTEM
Sold & Serviced By: ELECTROMATE. Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099
Table of ontents Pages esign onsiderations to Linear earings, Pillow locks and arriage ssemblies 7 to 3 Precision ing, Supports and ssemblies 37 to 5 Terms of Sale Inside ack over LINTH Standard Positioning
*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
ITT. CentriPro Fiberglass Basins, Covers, Hatches, Access Doors and Accessories. CentriPro. Engineered for life BCBASIN R4. Wastewater.
CASIN R4 ITT CentriPro Fiberglass asins, Covers, Hatches, Access oors and Accessories CentriPro is a brand of ITT Corporation. www.centripro.com CentriPro Features Fiberglass asins - heavy duty construction,
DPT Pilots DPA. Regular. Positive Pick-Up 8/9 6/7. Matrixes. Solid EDM Blanks DN DR. Round/ Shape 14/15 16
unches Standard Shapes J Jektole egular T ilots J Extended ange Jektole unches X O J egular unches K ound/ Shape ound/ Shape egular ositive ick-up ound/ Shape /3 4/5 6/7 8/9 13 egular ilots unches Clospace
HIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench
ATLAS FM FULL METRIC INSERTS CATALOG
TLS F FULL ETRI INSERTS TLOG 915 TLS F FULL ETRI LIND THREDED INSERTS TLS F metric blind threaded inserts offer ideal solutions for blind attachment applications where only one side of a panel is accessible
Super CB Series Clutch/Brakes
Super Series lutch/rakes Long Life, High Performance esign The Super Series lutch/rakes function in the same manner as the standard Series. The major advantage of the Super Series is extraordinary long
DRIVELINE CATALOG DRIVELINE DIVISION
RIVIN IVISION RIVIN TOG ertified Power Inc. - riveline ivision 390 Koopman ane, lkhorn, WI 53-00 Tel: 6.74.5600 ax: 6.73.785 -Mail: driveline @certifiedpower.com WG 5479- OPYRIGHT 006 RTII POWR IN. - RIVIN
AWP IP67 HEAT-SINK ALUMINIUM ENCLOSURE WITH SILICONE PROTECTOR FEATURE
AP SERIES Technical data IP67 Operating temperature -40 C~+105 C Maximum torque 1.0N m (10kgf cm) AP IP67 EAT-SINK ALUMINIUM ENCLOSURE IT SILICONE PROTECTOR 1 3 4 6 7 5 In order to provide EMI shielding,
Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
STROKES: 025, 050, 075, 100, 125, 150, 175, 200mm PNEUMATIC OR HYDRAULIC CYLINDER LIGHTWEIGHT ALUMINUM BODY
ISO 9001 REGISTERE WP4 & 6 SERIES GOL LINE STROKES: 025, 050, 075, 100, 125, 150, 175, 200mm PNEUMATIC OR HYRAULIC CYLINER SHOT PINS WP4 40mm SQUARE RAM SOLI STATE CYLINER SWITCH AVAILALE WITH WP4 70mm
Contents. BlackStar Bushings. BlackStar Bushings. 1
Contents Blacktar s Blacktar s Q tyle s............................................................. T s................................................................. plit Taper s...........................................................
EST GROUP DC /96 REV 8 03/03 PAGE 1 OF 11 THROUGH-THE-TUBE PLUGGING WITH CPI / PERMA PLUGS
PAGE 1 OF 11 THROUGH-THE-TUBE PLUGGING WITH CPI / PERMA CPI / Perma Plugs are part of the Pop-A-Plug Tube Plugging System. Unlike other tube plug designs, and under the proper conditions, CPI / Perma Plugs
"F" Series MGS Reducer Round Flange "F" Housing Shaft Output Dimensional Data
Round Flange "F" ousing Shaft Output imensional ata Y X L P V U UA G Y Y YA Q U 1 U M A rawing for Units F102VF F603VF O N J ia. on F olt ircle T Table No. 1 "F" Series Round Flange imensions (Inches)
New Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
MILLIMETERS DECIMALS FRACTIONS
CONVERSION CHART MILLIMETERS DECIMALS FRACTIONS mm Decimals Fractions mm Decimals Fractions mm Decimals Fractions mm Decimals Fractions mm Decimals Fractions 0.1.0039 0.2.0079 0.3.0118 0.397.0156 0.4.0157
HR-line. Heat recovery unit with counterflow heat exchanger. To be operated with cooling and / or after-heating. High Efficiency > 90%
10 R-line eat recovery unit with counterflow heat exchanger To be operated with cooling and / or after-heating igh fficiency > 90% quipped with fans oldbridge free Aluminum anodized frame construction
Basin and Package Accessories TECHNICAL BROCHURE BCBASIN FEATURES
TECHNICAL BROCHURE BCBASIN FEATURES Fiberglass Basins - heavy duty construction, standard sizes to 72" ia. and 96" eep, custom basins to 20' deep available by quote request. Covers Pipe Grommets - Use
THIN SECTION BALL BEARINGS RADIAL CONTACT, C-TYPE
106 KAA Series: Cross Section Size: " KA " K 5/16" KC " K " KF 3/4" KG 1".187.0.312.3.500.0 1.000 *The alphanumeric identification system is used under license. PART *NUMER* iameter 1.5000 2.0000 2.0000
Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
Y75 Series Sensing Probes
Product Bulletin Y75 Issue Date August 22, 2008 Y75 Series Sensing Probes The Y75 Series Sensing Probes are used with Direct Spark Ignition (DSI), Hot Surface Ignition (HSI), and Intermittent Pilot Ignition
Ground Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
Size Range: Body Material: Features:
C O O SVF Flow Controls I N C O R P O R A T E 13560 Larwin Circle Santa Fe Springs, CA 90670 800.783.7836 Fax: 562.802.3114 Sales@SVF.net www.svf.net SERIES 41, 41 & 42 FLANGE ALL VALVES API 607 4T EITION
SCHMIDT L200 & 300 SERIES OFFSET COUPLINGS
SCHMIT L200 & 300 SERIES OFFSET COUPLINS How To Select L200 & L300 Schmidt Offset s Example: Step 1. List the performance requirements a) Horsepower H=55 (HP) b) Shaft Speed N=1000 (RPM) c) B-10 Bearing
Mineral-Insulated RTD Temperature Probe According to DIN EN 60751
ata Sheet 902210 Page 1/12 Mineral-Insulated RT Temperature Probe According to IN EN 60751 For temperatures from -50 (-200) to +600 C Flexible sheath cable with vibration-resistant measuring insert As
DC Series. UL Recognized CSA Certified TUV Certified. DC Series. Specifications. Ordering Information 60 DC B 6 B. Electrical Schematics.
orcom Product Guide atalog: 1654001 ssue ate: 06.2011 R Power ine ilters for pplications Series 60 950 U Recognized S ertified TUV ertified 606 1510 Series General purpose line filters for applications
Carbon steel Grade DS 0, E5 1,25 6 9, ,33
ifting 101 145 series Y OOK and WI O T T O KI OOKS SSOIS best seller! 1 S I S I S S S S S S S S atigue tested rade 4, applied norm 1677-5, applied norm 1677-2 eets S 30.10 esign and forging process approved
F15 Ferra Series Hydraulic Pumps Concentric AB
F15 Ferra eries Hydraulic Pumps oncentric Innovation in Hydraulics ERIPION, FEURE N ENEFI oncentric F series gear pumps have an outstanding history in mobile off-highway applications. he F15 is the latest
Your Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
No. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
PTFE SELF-LUBRICATE BEARING
PTFE SEF-UBRICATE BEARING About US SAIBO is one of world recognized leaders in design and manufacturing of low friction linear motion components and precision bearings. SAIBO products are exported to
Size Grade Torque 9/ ft/lbs. 5/ ft/lbs. 3/ ft/lbs. 7/ ft/lbs ft/lbs.
Ford 150 5 1/2, 6 1/2 & 8 Boxes 4/16 HJ32003,Rev 2 BOlT TORQUE SPECIFICATIONS STANDARD BOlTS: Size Grade Torque 5/16 5 20 ft/lbs. 3/8 5 35 ft/lbs. 7/16 5 56 ft/lbs. 1/2 5 85 ft/lbs. Size Grade Torque 9/16
Bulletin 1494F 30A, 60A, 100A Fixed-Depth Disconnect Switch (Cat 1494F-N30; 1494F-N60; 1494F-N100; Series C)
Installation Instructions ulletin 1494F, 60, Fixed-epth isconnect Switch (at 1494F-N30; 1494F-N60; 1494F-N100; Series ) WRNING: To prevent electrical shock, disconnect from power source before installing
Inventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
Nut The standard bottom nut is a bullnose nut. Optional nut types, sub, mill, and side hill, are available.
Overview Logan Releasing Spears provide a positive means to engage and retrieve an internal fish from the well. The design of this rugged, dependable, and inexpensive internal catch fishing tool ensures
Piston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
member sizes 0-6 have male point in addition to length shown in the general dimensions on page 162
Thread Plug Gages - Taperlock Features/Benefits: manufactured from select steel ground, accurately lapped, and meticulously inspected in every thread element standard in X tolerance optional color gage
General Purpose Clutches FSO/HPI
General Purpose Clutches FSO/HPI Overrunning, Indexing, Backstopping Ball Bearing Supported, Sprag Clutches Model FSO General purpose, ball-bearing clutches suitable for overrunning, backstopping and light
MANAGING MOTION SINCE 1958 ILIZING HELI-CAL FLE
Innovative solutions for controlling mechanical movement U MANAGING MOTION HEI-CA G N I F Z I EX TI U SINCE 95 R E TE CH N O OG Y Helical Products Company, Inc. Engineering Expertise H E I C A MANAGING
Model R. q Fig. 81-H: Standard Type: q A, q B, q C, q D, q E, q F. q Fig. C-81-H: Corrosion Resistant CONSTANT SUPPORTS.
OSA SUPPORS odel R q Fig. 81-: Standard : q A, q, q, q, q, q F q Fig. -81-: orrosion Resistant : q A, q, q, q, q, q F onstant Support Finish: Standard finish; painted with semi gloss primer. orrosion resistant;
Aluminum Mechanical Lugs
luminum Mechanical ugs MNI INUSTRI ONNTORS One- and Two-onductor luminum ugs Suitable for use with either copper or aluminum conductors Manufactured from high strength 6061-T6 aluminum alloy lectroplated
FASTENER COMPONENTS INDEX
FSTENER OMPONENTS INEX ssembly 09/01/17 PGE TE SERIES ESRIPTION F-1 11/10/10 Fastener omponent Index F-1.1 11/10/10 Metric Fastener Standards F-2 07/25/08 Metric Fastener Standards F-2.1 05/29/15 Metric
EN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
The H-MAC Heavy Metal Articulating Chassis Construction Guide
The H-MAC Heavy Metal Articulating Chassis Construction Guide The Heavy Metal Chassis is constructed with two identical drive modules built using 10 mechanical sub-assemblies. The drive modules are integrated
Threadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
Collet Connectors Connectors for BOP stacks
ollet onnectors onnectors for OP stacks rilling challenge Offshore drilling environments have ventured into increased water depths, greater pressures, and harsher environments. ollet connectors need to
THROUGH-THE-TUBE PLUGGING WITH CPI / PERMA PLUGS
PAGE 1 OF 13 THROUGH-THE-TUBE PLUGGING WITH CPI / PERMA PLUGS CPI / Perma Plugs are part of the Pop-A-Plug Tube Plugging System. Unlike other tube plug designs, and under the proper conditions, CPI / Perma
MRK 25 M a r k 2 5 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T C H N C L T V L V M
MRK 25 SRS direct solenoid actuated valves MRK 25 MRK 25 M a r k 2 5 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T C H N C L T................................................... 3 V L V M O
Type 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
G43 Welded Assembly. G43 Clevis Assemblies
Chain & Assemblies 43 Chain r-43, commonly called igh Test, is manufactured to meet ASTM & NACM. Typical uses include container securement, logging, towing, and marine industry. r-43 is available in many
Section 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP
ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum
PERFORMANCE DATA. Type FH and FHS Flush-Head Studs
PERFORMANCE DATA The pushout, torque-out, and pull thru values reported here pertain only to the holding power of the stud to the sheet into which it is installed. These values in no way pertain to the
12AT/50AT Series Spin-On Filters
1 Applications for Mobile Equipment Hydrostatic Drives Industrial Power Units Reservoir Breathers Often, economic conditions dictate what type of filter is used on a piece of equipment. When costs are
Toyota CT26 Type Turbos
Type Turbos Dynamic & Carbon Seal Common Service Parts Oversize Service Parts Major Service Parts (Shaft & Wheels, Compressor Wheels) Turbine Housing Type Dynamic Seal Component Parts Common Dynamic Seal
NEW & USED TUBING, CASING, DRILL PIPE SPECIFICATIONS AND COLOR CODE SHEETS
NEW & USED TUBING, CASING, DRILL PIPE SPECIFICATIONS AND COLOR CODE SHEETS Leduc, Alberta Ph 780-955-2370 Fax 780-955-2353 Grande Prairie, Alberta Ph 780-532-8373 www.forceinspection.com 2 3/8 6.65* 0.280
H T STD STD STD
Ejector Pins Nitrided - Shoulder Inch Material AISI: H13 1.2344 D S Cat. No. 6 10 14 H T STD. +.005 STD. +.005 STD. +.005 1/32 1/2 EP03 06-1/2 065-1/2 2 EP03 06-2 10-2 105-2 1/4 1/8 1/2 EP04 06-1/2 10-1/2