HIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
|
|
- Godfrey Johns
- 5 years ago
- Views:
Transcription
1 HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE
2 Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench TS-0750-AMS TS-078-AMS TS-08-AMS TS-0875-AMS TS-038-AMS TS-000-AMS TS-047-AMS TS-06-AMS TS-03-AMS TS--AMS TS-88-AMS 3/4 5/3 /6 7/8 /6-3/64 -/6-3/3 -/8-3/ ESW-06 ESW-06 ESW-06 SW-0307 SW-0307 SW-30 SW-30 SW-30 CSW-355 CSW-355 CSW-355 T- T- T- INSERTS TS-0750 TS-078 TS-08 TS-0875 TS-038 TS-000 TS-047 TS-06 TS-03 TS- TS-88 40º Specifications - rilling epth 5x iameter TS-0750-AM TS-078-AM TS-08-AM TS-0875-AM TS-038-AM TS-000-AM TS--AM TS-88-AM PARTS l Screw Wrench 3/4 5/3 /6 7/8 /6 -/8-3/ ESW-06 ESW-06 ESW-06 SW-0307 SW-0307 SW-30 CSW-355 CSW-355 l T- T- INSERTS TS-0750 TS-078 TS-08 TS-0875 TS-038 TS-000 TS- TS-88 Note: All cutters are supplie without inserts. --
3 Inexable S-Cut Inserts CATAOG NUMBER IMENSION JC505 STOCK TS /4 TS-078 5/3 TS-08 /6 TS /8 TS-038 TS-000 /6 TS-047-3/64 TS-06 -/6 TS-03-3/3 TS- -/8 TS-88-3/6 Recommene Cutting Conitions WORK MATERIA RATE.750 TOO IAMETER ow Carbon Steel AISI 00,530.3, ,40 4.,30.,0.,0.8,00.,080.0,050.6, AISI 050,70.,0 4.6,80 4.,00., (Heat Treate/45RC), Alloy Steel AISI 440,70.7,0.,80.8,00 0., Tool Alloy Steel AISI H Harene Alloy (Heat Treate/45RC) Stainless Steel AISI 304, Cast Iron,530,470,40,30,0,0,00,080,050, Aluminum Alloy 660 Heat Treate,530.,470.8,40.3,30 0.5,0.8,0.,00 8.7, , ,
4 S-Cut rill SC AMS SC-0-03-AMS SC AMS SC--04-AMS SC--043-AMS SC--045-AMS SC--046-AMS SC--048-AMS SC--050-AMS SC--05-AMS SC--053-AMS SC AMS SC AMS SC--057-AMS SC--05-AMS SC--060-AMS SC-6-06-AMS SC AMS SC AMS SC AMS SC AMS SC AMS SC-8-07-AMS SC--073-AMS SC--075-AMS SC--076-AMS Specifications l SC AMS SC-0-07-AMS SC--08-AMS SC--08-AMS SC--084-AMS SC--085-AMS SC--087-AMS SC-3-08-AMS SC-3-00-AMS SC-3-0-AMS SC-4-03-AMS SC-4-05-AMS SC-5-06-AMS SC-5-08-AMS SC-5-00-AMS SC-6-0-AMS SC-6-03-AMS SC-7-04-AMS SC-7-06-AMS SC-7-07-AMS SC-8-0-AMS SC-8-0-AMS SC---AMS SC--4-AMS SC---AMS SC-30-7-AMS SC-30-8-AMS Specifications l rilling epth 3 x iameter -4- l
5 rilling epth 5 x iameter Specifications SC AM SC-0-03-AM SC AM SC--04-AM SC--043-AM SC--045-AM SC--046-AM SC--048-AM SC--050-AM SC--05-AM SC--053-AM SC AM SC AM SC--057-AM SC--05-AM SC--060-AM SC-6-06-AM SC AM SC AM SC AM SC AM SC AM SC-8-07-AM SC--073-AM SC--075-AM SC--076-AM l Recommene Cutting Conitions Specifications SC AM SC-0-07-AM SC--08-AM SC--08-AM SC--084-AM SC--085-AM SC--087-AM SC-3-08-AM SC-3-00-AM SC-3-0-AM SC-4-03-AM SC-4-05-AM SC-5-06-AM SC-5-08-AM SC-5-00-AM SC-6-0-AM SC-6-03-AM SC-7-04-AM SC-7-06-AM SC-7-07-AM SC-8-0-AM SC-8-0-AM SC---AM SC--4-AM SC---AM SC-30-7-AM SC-30-8-AM S-Cut rill l WORK MATERIA RATE.375 TOO IAMETER ow Carbon Steel AISI 00 AISI 050 (Heat Treate/45RC) Alloy Steel AISI 440 Alloy Tool Steel AISI H- Harene Alloy (Heat Treate/45RC) Stainless Steel AISI 304 Cast Iron Aluminum Alloy 660 Heat Treate, , , , , , , ,0.7,70.7,570.6,80 7.,570.7, , , ,0.,0.,530.,0 6.,530.3, ,0 6.,0 7.5,0.5, 7.0,360 0.,00 6.,360.6, ,00 6., , 0.,530.3, , ,830.0,530.,70.7, , , ,70 7.6, ,40 6.,80 7., ,30.7, , , ,
6 Sigma rill l 40 with Coolant Through X-H-SM Type Specifications - rilling epth 4 x iameter X-H-SM 500 X-H-SM 656 X-H-SM 8 X-H-SM 6 X-H-SM 3 X-H-SM 38 X-H-SM 3438 X-H-SM 354 X-H-SM 3750 X-H-SM 306 X-H-SM 406 X-H-SM 4 X-H-SM 4375 X-H-SM 453 X-H-SM 4688 X-H-SM 4844 X-H-SM 5000 X-H-SM 56 X-H-SM 53 X-H-SM 546 X-H-SM 565 X-H-SM 578 X-H-SM 537 X-H-SM 604 X-H-SM X-H-SM 6406 X-H-SM 6563 X-H-SM 678 X-H-SM 6875 X-H-SM 703 X-H-SM 788 X-H-SM 7344 X-H-SM 7500 l X-H-SType Specifications - rilling epth 6 x iameter X-H-S 500 X-H-S 656 X-H-S 8 X-H-S 6 X-H-S 3 X-H-S 38 X-H-S 3438 X-H-S 354 X-H-S 3750 X-H-S 306 X-H-S 406 X-H-S 4 X-H-S 4375 X-H-S 453 X-H-S 4688 X-H-S 4844 X-H-S 5000 X-H-S 56 X-H-S 53 X-H-S 546 X-H-S 565 X-H-S 578 X-H-S 537 X-H-S 604 X-H-S X-H-S 6406 X-H-S 6563 X-H-S 678 X-H-S 6875 X-H-S 703 X-H-S 788 X-H-S 7344 X-H-S 7500 l
7 SH-S Type SH-S-0 SH-S-04 SH-S-0 SH-S-07 SH-S-08 SH-S-00 SH-S-0 SH-S-03 SH-S-05 SH-S-06 SH-S-08 SH-S-0 SH-S-03 SH-S-03 SH-S-035 SH-S-037 SH-S-040 SH-S-04 SH-S-043 SH-S-045 SH-S-046 SH-S-048 SH-S-050 SH-S-05 SH-S-053 SH-S-054 SH-S-056 SH-S-057 SH-S-05 SH-S-060 SH-S-06 Specifications - rilling epth x iameter l SH- Type Specifications - rilling epth 4 x iameter l SH--0 SH--04 SH--0 SH--07 SH--08 SH--00 SH--0 SH--03 SH--05 SH--06 SH--08 SH--0 SH--03 SH--03 SH--034 SH--035 SH--037 SH--040 SH--04 SH--043 SH--045 SH--046 SH--048 SH--050 SH--053 SH--056 SH Hosoi rill l 40
8 ijet-rilling Series Recommene Cutting Conitions For Sigma rill WORK MATERIAS ow Carbon Steel AISI 00 (S0C) AISI 04 (S50C) AISI 04 Heat Treate/HRC45 Alloy Steel AISI 445 (SCM445) Alloy Tool Steel AISI (SK) Gray Cast Iron AISI 0 (FC00, FC50) Noular Cast Iron (FC) RATE , 8 45, ,00 43, 7, 40,000, 35,000 6, 40, 34,000 0,000 30,600 7,000 6,600 0,000 30,000 5,, 8, 4, 3,300, 8,600 TOO IAMETER,450,450 4,00,450,00,450 4,350,,,0, 8,0,,300 8,50,50 0,50 6,50,0 6,00,00 7,00 4, Recommene Cutting Conitions For Hosoi rill WORK MATERIAS ow Carbon Steel AISI 00 (S0C) AISI 04 (S50C) Alloy Steel AISI 445 (SCM445) Alloy Tool Steel AISI (SK) Gray Cast Iron GM38M (FC00) Noular Cast Iron GM45M (FC) Stainless Steel AISI 304 (SUS304) Titanium Alloy Inconel RATE. 4, , , , , 7 4 3, 0,500,50,000,, , 8,300,0 4,,450, ,00, 7,,500 7,50 4, TOO IAMETER , 8,550 4,450 6,300 4, 0, 6,750,550 7,,50,750 4, ,,00,050,550, 7,350 6,50,00,350, ,50,00 0,00 7, ijet Incorporate Helm Street Plymouth, MI 4 U.S.A. Phone -74-IJET Fax No part of this catalog may be printe, copie or reprouce without the expresse written permission of IJET, Inc.
January /9. New Cutter with Strong Insert
1/9 New Cutter with Strong Insert 2/9 New cutter with strong insert FEATURES Higher insert thickness, stronger screw systems for heavy or demanding applications Exceptional performance at very high feed
More information2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
More information"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
More informationAD-2D NEW Drilling Solid carbide 2xD
l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:
More informationHitachi Tool Engineering Europe GmbH. No
Hitachi Tool Engineering Europe GmbH No. 324.3 Inexable illing Too AS The new AS/AHU ini has 2 kins of insert shapes an applications: JDT type insert for 90 cutting JDT Schneiplatte für 90 Bearbeitungen
More informationEX-(SUS) SERIES. TiN-coated HSSE precision drills EX-SUS-GDS EX-SUS-GDR EX-GDS EX-GDR
EX-(U) ERIE TiN-coate HE precision ris EX-U-G EX-U-GR EX-G EX-GR X Key features: EX-U eries EX-U-GR 485 sizes increments of 0.01 from 2.0-6.0mm EX-U-G Wie variety of in-between sizes 635 sizes, increments
More informationUPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN)
Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Face Mills: 1A7G (10mm IC insert) 1A7H (12mm &.500" IC insert) 1A7K (16mm IC insert) 1A7M (20mm &.750" IC insert) End Mills: 15B1A (10mm IC insert)
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationThreadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationPRODUCT CATALOG MAIN INDEX
ROUCT CATAOG MAIN INEX Contents ages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide rills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 SS Tool Bits, End Mills & Centre rills
More informationREPLACEABLE TIP DRILLS
REPLACEABLE TIP DRILLS Pages 463-470 Pages Features & Benefits...464 T-Drill Tips... 467-468 H 3XD Bodies...465 H 5XD Bodies...465 H 8XD Bodies...466 H 12XD Bodies....466 H 1.5XD Bodies & Tips.... 467
More informationSMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
More informationHKK CURVED JAW COUPLINGS HITEX COUPLINGS
HKK CURVE JAW COUPINGS HITEX COUPINGS CURVE JAW COUPINGS Coupling selection The HKK jaw coupling selection shoul be mae accoring to IN 740-2. Proper imensioning of the coupling shoul be one to ensure that
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationWith over 100 different standard configurations... And still growing! Remember to use COPASLIP anti-seize compound on all insert screws
With over 100 different standard configurations...... And still growing! Standard Length End Mills TXD90-0500.500.625 3.00 1.09 1 TXD90-0625.625.625 3.00 1.09 2 TXD90-0750 3.50 1.47 2 TXD90-0750F 3.50
More informationThreadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
More informationReduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
More informationGennaio TiN-coated HSSE precision drills EX-(SUS) SERIES EX-SUS-GDS EX-SUS-GDR EX-GDS EX-GDR
TiN-coate HE precision ris EX-(U) ERIE EX-U-G EX-U-GR EX-G EX-GR Gennaio 2017 Key features: EX-U eries EX-U-GR 485 sizes increments of 0.01 from 2.0-6.0mm EX-U-G Wie variety of in-between sizes 635 sizes,
More informationCarbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
More informationAQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
More informationEZ cutting edge geometry reduce power consumption by 30%. achiees longer tool life of holder and. Tool life comparison
Tooling by Drills TEZD-MS/MLTYPE Easy assembly and high cutting performances Ecology EZ cutting edge geometry reduce power consumption by 30%. Economy High rigid insert. achiees longer tool life of holder
More informationTDXL Serie PRODUCT INFORMATION. Vol 2. HSS EXTRA LONG DRILLS 10 D, 15 D and 20 D! NEW TDXL
PRODUCT INFORMATION Serie HSS EXTRA LONG DRILLS D, D and 2 D! Vol 2 Newly developed flat flute (Pat. P.) Newly developed low-resistance thinning (Pat. P.) Newly developed WXL coating for drills features
More informationMini Mill-Thread (cont d) Mill-Thread Solid Carbide. Mill-Thread Solid Carbide for Threading and Grooving Deep Parts. Mini Chamfer Tools 34
Metric recision Toos t. CONTENTS Mi-Threa Soi Carbie rouct entification with cooant bore with interna cooant through the futes G ( ) G ( ) with interna cooant through the futes Whitworth with interna cooant
More informationHIGH PRESSURE, COOLANT CAPABLE TURN/GROOVE & PARTING TOOLS
HIGH PRESSURE, COOLANT CAPABLE TURN/GROOVE & PARTING TOOLS T-Burst; T-Clamp Ultra Plus Series Swiss Type Holders.375".500.625 Traditional Holders.75 1.00 Widths 2mm (.079 ) 3mm (.118") 4mm (.157") 5mm
More informationBALL BEARINGS & STEEL SHAFTS
BA BEARINGS & STEE SHAFTS Every care has been taken to ensure the accuracy of the information containe in this catalogue, but no liability can be accepte for any errors or omissions. We reserve the right
More informationIndexable Milling Tools
No. 315.4 Short Name Type: CRBIE Page Ba High Precision Finish - Carbide Shank Reguar BPF-W 8 5 4 BPF-W Ba High Precision Finish - Carbide Shank ong Neck 8 1 4 BPF-WE Ba High Precision Finish - Carbide
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationINSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
More informationNew Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
More informationBimetal thermometers Index
Inex eneral information Prouct information With brass pocket page Inex 685 Brass pocket; Aluminium case 686 Brass pocket; 687 With brass probe page Brass probe; Aluminium case; Air uct thermometer 688
More informationAquaREVO DRILLS NEW HIGHLY EFFICIENT AND MULTI-PURPOSE. Doubled tool life due to improved substrate, coating and cutting geometry
AquaREVO DRILLS HIGHLY EFFICIENT AND MULTI-PURPOSE CELEBRATE THE POLE POSITION NEW Doubled tool life due to improved substrate, coating and cutting geometry AquaREVO DRILLS STUB (3D) / REGULAR (5D) REVOlutionize
More informationSection VIII Hydraulic Tooling
Section VIII Hydraulic Tooling MSTRLIN CYLINR CCSSORY MTING CHRT Masterline Knuckle Masterline Clevis racket Masterline RS Masterline lignment Coupler KN-1 C-1 1/2 x 1 7/8-RS SC-5 KN-2 C-2 1/2 x 2 5/8-RS
More information4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
More informationAQUA DRILL EX OIL-HOLE LONG
AQUA DRILL EX OIL-HOLE LONG HIGH-EFFICIENT DEEP HOLE DRILL CELEBRATE THE POLE POSITION NEW AQUA EX COATING Deep-Hole Drills Aquadrill EX Oil-hole long Reliable and Durable in Largest Drill Depths High-Efficient
More informationOmslag. Main Catalogue EN
Omslag Main Catalogue EN We reserve the right to moify any specification an/or item shown in the present catalogue without notice. Information, photos, rawings an technical ata specifie in the publication
More informationTrio-Cut Circular Thread Milling Tools
Circular Threa illing Tools ore Ø Threa Page 4 6 x 2 5 9 20 x 7 52-53 22 24 x 20 54 26 30 x 25 55 n 3 Applications with only Tool n Threa illing n Threa illing with Unercut n rill illing n High Efficiency
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationOn Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
More information*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
More informationR D. Brackets Type Material Shaft D E F K R S T U X set mm mm mm mm mm mm mm mm mm mm Article N
Mounting Brackets for Interroll rum Motors 80s 113s rum Motor Bracket: ROHS chrome passivated mild steel or stainless steel R E K X T S rum Motor Brackets Brackets Type Material Shaft E K R S T X set mm
More informationGEN2 T-A Drill Inserts
RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts Series iameter Range: 12.98mm - 17.65mm (.511 -.695 ) RILLING T1 1 132 HSS Inserts - Super obalt arbide Inserts - K2 (2) K35 (1) Insert
More informationNEW. ARNO Mini-System. AMS the new modular and extremely flexible. Minimum bore diameter from 2,5 mm and bore depth up to 30 mm.
NEW Introducing AMS ANO - Mini - System www.arno.de AMS ANO -Mini-System! High productivity for machining small diameter applications. Maximum reliability, high precision and guaranteed repeatability due
More informationNEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
More informationMetal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90
More informationPRODUCT INFORMATION. HSS NON-STEP EXTRA LONG DRILLS 10 D, 15 D and 20 D! VOL.3 TDXL TDXL
PROUCT INFORMATION HSS NON-STEP EXTRA ONG RIS, an 2! VO.3 1 Newy eveope fat fute (Pat. P.) 2 4 Newy eveope ow-resistance thinning (Pat. P.) Newy eveope WX coating for ris 3 features four newy eveope technoogies
More informationØ range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max
Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range
More informationMOLD GRINDING POLISHING
G At M.A.Ford, we pride ourselves on being one of the world s premier manufacturers of high performance cutting tools. That s as true today as it was back in 1919 when Matthew A. Ford produced the first
More informationTungsten Carbide Burrs
Tungsten Carbie Burrs Material Groups,, Types of Cut PFERD tungsten carbie burrs are esigne for machining materials of virtually any strength. Their superior performance reflects an optimum combination
More informationPYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE
Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438
More informationPneumatic Valve Actuator
Pneumatic Actuator s to 150,000 psi (10342 bar) The need to control process and vent valves from a remote location makes air operated valves a vital component to many processing operations. All Parker
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationPrecision Aluminum Nosepieces Index
Aluminum Nosepiece Index Precision Aluminum Nosepieces Index TYPE II REGUAR STYE TYPE II COOANT STYE REGUAR STYES...FOR MOST MAKES AN MOES OF POSITIVE FEE RI TYPE I QUACKENUSH TYPE O-12 Aluminum Nosepieces
More informationMACH-Drill. Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value. No: Safety instruction
No:161-1 Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value Safety instruction Do not touch the edge with bare hand. Wear safety glasses or face cover. Make appropriate
More informationHAM-LET POSITIONABLES ELBOW & TEE
H POSOBS BO & PROUCS UP POSOBS PR S J26 S 16142 769 OB BO UB O S/S SRGH HR BOSS (POSOB)* 1 ** nformation ube O.. S/S 769OB SS 1/4 X 7/1620 769OB SS 1/4 X 9/1618 769OB SS 3/8 X 9/1618 1/4 6.35 7/1620 0.
More informationUREA SERVICE FORGED VALVES
UREA SERVICE FORGED VALVES 288 UREA SERVICE VALVES 289 UREAvalves DROP CHECK VALVE UREA SERVICE PN325 1/2 to 2 DOUGLAS CHERO DROP CHECK VALVE UREA SERVICE DROP CHECK VALVE UREA SERVICE PN325 : PN325 Drop
More informationSAMURAI Series. 51 Models. 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball. Ø1 - Ø12mm. Vol
SAMURAI Series Vol. 2-2011 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball 51 Models Ø1 - Ø12mm SAMURAI GS - 4 Flutes Square ( Ø 1 Ø 10 ) d2 d1 l2 l1 Suitable for the machining of : Carbon Stainless
More informationEPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life
EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing
More information3 & 4 WAY DIVERTER VALVES DESIGN FEATURES
3 & 4 WAY DIVERTER VALVES The 3V and 4V models are diverter valves designed to handle solid loaded fluids. Mainly used for pulp stock in the Pulp and Paper industry. Sizes: 80 to 300 (larger diameters
More informationSECO 335 SERIES DISC MILLING RANGE ADDITIONS INNOVATION & PERFORMANCE IN NEW CUTTING WIDTHS
SECO 335 SERIES DISC MILLING RANGE ADDITIONS INNOVATION & PERFORMANCE IN NEW CUTTING WIDTHS 335.25 DISC MILLING CUTTER Seco continues to meet and exceed customer demand with the addition of two new insert
More informationMHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
More information8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
More informationStock QD Bushings. DISMOUNTING 1. Remove pull-up bolts and screw them into TAPPED holes in sheave or sprocket and against flange of QD bushing to
Stock Q s MOUNTING ROCEURE Q USHINGS IMORTANT E SURE TAERE CONE SURFACES OF Q USHING AN INSIE OF SHEAVE OR SROCKET HU ARE RY AN FREE OF ALL FOREIGN SUSTANCES SUCH AS AINT, GREASE, OR IRT. STANAR MOUNTING
More informationNo: LPD 12mm~ 13.5mm SPD 13mm~ 22mm NPD 23mm~ 60mm NPD Cartridge 61mm~ 100mm. Through Coolant System
No: 160-6 Features Excellent chip evacuation due to the specially designed flute - Special surface treatment of shank provides long durability - 4 cutting-edge using economical geometry of insert - Various
More informationAD & ADO SERIES Volume 4
New carbie ri series A & AO ERIE Voume 4 N E W C O A T I N G A - A O N E W E R I E A - A O N E W E R I E 78 IN N E W C O A T HANK IZE AE I N G A - A O N E W E R I E E R I E A - B R A N E R I E A - B R
More information(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationVariable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
More informationSECTION 15 Breakaway Couplers
SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers
More informationTOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
More informationSummer WDX Indexable Drills. WDX Promo Details. 1. Kit Price: Includes Drill & 10 Inserts
Summer 017 Promotion Promo valid through July 31, 017 et Sumitomo help you meet your productivity goals! WDX Indexable Drills WDX Promo Details 1. Kit Price: Includes Drill & 10 Inserts WDX Offer valid
More informationMXL Timing Belt Pulleys
MXL TIMING BELT PULLEYS Quality 15 15 MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize QPMMXLA25015F03 QPMMXLA250F03 QPMMXLA2501F04 QPMMXLA25020F04 15 1 20 3 (.111) Tolerance : 3 mm
More informationSection S. weight tables
Section S weight tables steel bars Rounds... 2-3 Squares... 3 Hexagons... 4 Octagons... 4 Flats... 5-8 Steel circles... 9-10 Steel and Aluminum weight formulas... 11 Bars, Tubing, Circles, Rings Weight
More informationSIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
More informationCompressed air to
G G A S F J 2 N/ S/F Specifications escriptions Cylinder bore size Working fluid mm Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Rod
More informationHSS-Drills. HSS-DrillS
-Dris -DriS Center dris Cutting direction Too materia Standard Diameter range (mm) Cataog no. Discount group Standard range, page Center dris without fat DIN 333 0,500-12,500 71600 132 367 eft-hand DIN
More informationProduct Comparisons. Door Closers. stanleysecurity.com
Yale 4400 Series Certification STANLEY QDC100 Yale 4400 Series Certified BHMA/ANSI A156.2 Series Grade 1 Yes Yes UL 10B Yes Check with Manufacturer Warranty STANLEY QDC100 Yale 4400 Series Mechanical Warranty
More informationTRI TOOL INC. TECHNICAL SPECIFICATION 301SP SHORT PERCH TUBE FACING AND SQUARING TOOL JANUARY, 2001
TRI TOOL INC. TECHNICAL SPECIFICATION 301SP SHORT PERCH TUBE FACING AND SQUARING TOOL JANUARY, 2001 MODEL 301SP TUBE FACING AND SQUARING TOOL The Model 301SP Tube Squaring Tool is designed specifically
More informationPinzBOHR High Precision Boring Tools
PinzBOHR High Precision Boring Tools What to expect from our boring tools. Our European mae boring tools have been proven worl wie to be among the best you can buy. Machinists love our boring tools because
More informationOther materials are available on request. Operating conditions
Merkel U-Ring T 18 Merkel U-Ring T 18 Asymmetrical sealing lip POM back-up ring PUR profile ring Profile ring Coe Harness Polyurethane 95 AU V142 95 Shore A Fig. 1 Merkel U-Ring T 18 Back-up ring Polyacetal
More informationROLLER CHAIN SPROCKETS
ROLLER CHAIN PROCKE ypes an Materials Correct engagement between roller chain an sprocket is require for smooth transmission of roller chain. Appropriate selection of number of teeth (spee ratio), center-to-center
More informationGStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
LIVE 77 Includes Tools 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Lathe Tooling
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More informationTRI TOOL INC. TECHNICAL SPECIFICATION Model 301 TUBE FACING AND SQUARING TOOL JANUARY, 2001
TRI TOOL INC. TECHNICAL SPECIFICATION Model 301 TUBE FACING AND SQUARING TOOL JANUARY, 2001 MODEL 301 TUBE FACING AND SQUARING TOOL The Model 301 Tube Squaring Tool is designed specifically to prepare
More informationTHE PREMIUM QUALITY. Hydraulic Swaging Unit for Pre-Swaging Over 1. Catalog Number 01-5 March, 2009 HYDRAULICSWAGINGUNIT.
TH PRMIUM QUAITY Catalog Number 0-5 March, 009 HYRAUICSWAGINGUNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female
More informationContent. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
More informationINTERCHANGEABLE BUSHINGS
INTERCHNGEE Index SECTION PROUCT PGE INEX................................................................................... - USHING TYPES..........................................................................
More informationTHE PREMIUM QUALITY. Catalog Number 01-5 November,
TH PRMIUM QUAITY Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee T Union Cross
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationFeatures. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
More informationADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加
超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm
More informationDrills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
More informationGroup 6. 10K High Pressure Fittings Tubing Nipples Adaptors
Group 0K High Pressure Fittings Tubing Nipples Adaptors INEX Page ontents 2 Index 3 0K Fittings NPT-NPT 4 0K Fittings JI-JI, JI - NPT 5 X-Overs - HP Fittings / Male Threads -8 High Pressure Fitting and
More informationChoice of body materials Cast iron, carbon steel, chrome moly, forged steel, stainless steel, bronze.
Strainer Tight seating Both ends of the chamber are precisely machined to provide perfectly round and smooth seating surfaces as well as fixed chamber length. The screen seats snugly on the machined surface
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationKLT and KLS Series Tank Top Return Line Filters
KLT and KLS Series Tank Top Return Line Filters 23 KLT/KLS Series Tank Top Return Line Filters Applications for KLT and KLS Filters Mobile Equipment Construction, Refuse Industrial Power Units Machine
More informationAbout Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
More information