MXL Timing Belt Pulleys
|
|
- Thomasine Norris
- 5 years ago
- Views:
Transcription
1 MXL TIMING BELT PULLEYS Quality MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize QPMMXLA25015F03 QPMMXLA250F03 QPMMXLA2501F04 QPMMXLA25020F (.111) Tolerance : 3 mm ( ) 4 mm O.D. Tolerance: 15 to 20 teeth (.32) (.407) (.45) (.509) NOTE: Dimensions in are in inch (.362) 9.4 (.37) (.43) (.49) 125 Railroad Avenue, Garden City Park, NY Phone: (5) Fax: (5)
2 Quality 15 MXL TIMING BELT PULLEYS MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize 11 (.433) QPMMXLA25021F04 QPMMXLA25022F04 QPMMXLA25024F04 QPMMXLA25025F04 QPMMXLA25026F04 QPMMXLA2502F04 QPMMXLA25030F06 QPMMXLA25032F06 QPMMXLA25036F06 QPMMXLA25040F06 QPMMXLA25042F06 QPMMXLA25044F06 QPMMXLA2504F06 QPMMXLA25050F06 QPMMXLA250F Tolerance : 4 & 6 mm O.D. Tolerance: 21 to 40 teeth to teeth (.535) (.5) (.611).17 (.637).2 (.662) 1.11 (.713) 19.4 (.764) 20.7 (.15) (.917) 25.7 (1.019) (1.070) 2.46 (1.120) (1.222) (1.273) NOTE: Dimensions in are in inch (.515) (.540) (.591) (.617).31 (.642) 17.6 (.693) 1.9 (.744) (.795) 22.7 (.97) (.999) (1.050) (1.100) (1.202) 31.3 (1.253) 30.3 (1.50) 11 (.433) 12.5 (.492) 13 (.512) 17 (.669) 19 (.74) 21 (.27) 22 (.66) 20 (.77) 33 (1.299) 35 (1.37) 44 (1.732) 125 Railroad Avenue, Garden City Park, NY Phone: (5) Fax: (5)
3 MXL TIMING BELT PULLEYS Quality MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize 10 (.394) QPMMXLA250N06 QPMMXLA25065N06 QPMMXLA25072N06 QPMMXLA2500N06 QPMMXLA25090N06 QPMMXLA25100N0 QPMMXLA25120N Tolerance : 6 mm mm O.D. Tolerance: to 72 teeth to 120 teeth NOTE: Dimensions in are in inch (1.655) (1.33) (2.037) 5.21 (2.292) 64.6 (2.546) (3.056) 3.3 (1.50) (1.635) (1.13) (2.017) 57.7 (2.272) (2.526) (3.036) 29 (1.142) 30 (1.11) 32 (1.2) 45 (1.772) 50 (1.969) 125 Railroad Avenue, Garden City Park, NY Phone: (5) Fax: (5)
4 Quality MXL TIMING BELT PULLEYS MATERIAL: AISI 1045 Steel FINISH: Black Oxide QPMMXLS25015F03 QPMMXLS250F03 QPMMXLS2501F04 QPMMXLS25020F (.111) Tolerance : 3 mm ( ) 4 mm O.D. Tolerance: 15 to 20 teeth (.32) (.407) (.45) (.509) NOTE: Dimensions in are in inch (.362) 9.4 (.37) (.43) (.49) 125 Railroad Avenue, Garden City Park, NY Phone: (5) Fax: (5)
5 MXL TIMING BELT PULLEYS Quality 15 MATERIAL: AISI 1045 Steel FINISH: Black Oxide 11 (.433) QPMMXLS25021F04 QPMMXLS25022F04 QPMMXLS25024F04 QPMMXLS25025F04 QPMMXLS25026F04 QPMMXLS2502F04 QPMMXLS25030F06 QPMMXLS25032F06 QPMMXLS25036F06 QPMMXLS25040F06 QPMMXLS25042F06 QPMMXLS25044F06 QPMMXLS2504F06 QPMMXLS25050F06 QPMMXLS250F Tolerance : 4 & 6 mm O.D. Tolerance: 21 to 40 teeth to teeth (.535) (.5) (.611).17 (.637).2 (.662) 1.11 (.713) 19.4 (.764) 20.7 (.15) (.917) 25.7 (1.019) (1.070) 2.46 (1.120) (1.222) (1.273) NOTE: Dimensions in are in inch (.515) (.540) (.591) (.617).31 (.642) 17.6 (.693) 1.9 (.744) (.795) 22.7 (.97) (.999) (1.050) (1.100) (1.202) 31.3 (1.253) 3.3 (1.50) 11 (.433) 12.5 (.492) 13 (.512) 17 (.669) 19 (.74) 21 (.27) 22 (.66) 20 (.77) 33 (1.299) 35 (1.37) 44 (1.732) 125 Railroad Avenue, Garden City Park, NY Phone: (5) Fax: (5)
6 Quality MXL TIMING BELT PULLEYS MATERIAL: AISI 1045 Steel FINISH: Black Oxide 10 (.394) QPMMXLS250N06 QPMMXLS25065N06 QPMMXLS25072N06 QPMMXLS2500N06 QPMMXLS25090N06 QPMMXLS25100N0 QPMMXLS25120N Tolerance : 6 mm mm ( ) O.D. Tolerance: to 72 teeth to 120 teeth NOTE: Dimensions in are in inch (1.655) (1.33) (2.037) 5.21 (2.292) 64.6 (2.546) (3.056) 3.3 (1.50) (1.635) (1.13) (2.017) 57.7 (2.272) (2.526) (3.036) 29 (1.142) 30 (1.11) 32 (1.2) 45 (1.772) 50 (1.969) 125 Railroad Avenue, Garden City Park, NY Phone: (5) Fax: (5)
AT5 Timing Belt Pulleys
Quality 5 mm AT5 (.1969") MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize (.8) NOTE: Dimensions in are in inches. QPMAT5A16010F06 QPMAT5A16011F06 QPMAT5A16012F06 QPMAT5A16013F06 QPMAT5A16014F06
More informationPowerGrip Timing Belt Drives
PowerGrip Timing Belt Drives Single Sided Belt Drive Systems PowerGrip Timing Belt drives operate on the tooth-grip principle, with the molded teeth the belt designed to make positive engagement with the
More informationintroduction WARRAnTY / DiScLAiMeR OF unstated WARRAnTieS / LiMiTATiOn OF LiABiLiTY Warranty. Disclaimer of unstated warranties.
BeLLOWS couplings Introduction Ruland Manufacturing Co., Inc. has been supplying carefully made products since 1937. We have manufactured everything from bicycle pumps to high pressure valves, including
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationEJP SERIES Right-angle Worm
EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals
More informationPulley pitch range. Pulley pitch range - Overview. Pulleys and Components. Selftracking Series. Standard Pulley ATL-Series. T-Series.
Pulley pitch range Pulley pitch range - Overview AN-Series A-Series AN 10 AN 12.7 AN 20 Selftracking SFA-Series SFA 10 SFA 15 SFA 20 A 3 A 5 A 10 A(S) 15 A 20 HD/SD-Series HD 3M*) HD 5M*) HD 8M*) HD 14M*)
More informationPrecision Motion Control Pulleys
Precision Motion Control Pulleys EXPRESS SERVICE Automated design tools Instant quoting Fastest delivery QUALITY Belt and pulley know how Consistent design standards World class LEAN manufacturing Precise
More informationCLASSICA Imperial pitch - CD MXL - XL - L - H - XH SYNCHRONOUS BELT - - CHD CD APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
CLASSICA Imperial pitch - CD Performance index The CLASSICA synchronous belt, being designed with imperial pitch, is a valid and economical alternative solution in low/medium torque transmission systems.
More informationProduct Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
More informationE*P*S* SYNCHRONOUS TIMING BELTS
E*P*S* SYNCHRONOUS TIMING BELTS Synchronous timing belts provide an economic means of positive power transmission. They are basically flat belts with teeth on the inside circumference resulting in high
More informationWINTERS ( )
Economy Economy Test Panel Mounted Economy Spiral Tube Series New Sizes! Economy CRN Description The Winters Economy Gauge is designed for applications where cost savings are paramount. Many configurations
More informationFan Coils Valve packages general data: V-B4E
Fan Coils Valve packages general data: V-B4E Zehnder Rittling Console and High Capacity Fan Coils have standard valve packages available as a factory built assembly and field-installed option for the main
More informationNumber of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
More informationFlange Number Weight less Part Pitch Outside of Plain Bore Bushing No. Diameter Dia. Grooves Stock Max. Bushing (lbs.)
STOCK SIZES Made of high-quality metals, these pulleys are machined to exacting standards for a perfect mesh with the mating belt. Synchro-Cog timing drives provide long-lasting synchronous power transmission
More informationTubing & Weights. Aluminum, D.O.M. & Tube & Yoke Assemblies
MC1104-8 Nov. 2004 ROCKFORD Drive Line Tubing & Weights Aluminum, D.O.M. & Tube & Yoke Assemblies MANUFACTURER OF DRIVELINE COMPONENTS 1500 11TH AVENUE ROCKFORD, ILLINOIS 61104 PHONE (815) 962-1411 FAX
More informationStretch & Glue Frame Price List January 2019
Frame January 2019 Gt 75 / dia-mini.75 Max Size: 18 Width: 3/4 Height: 3/4 Wall Thickness:.063 Weight per Ft:.2 Lbs 20 22 24 26 28 30 32 34 36 38 $ 18.75 18.95 19.15 19.35 19.55 19.75 19.95 20.20 20.45
More informationDWO DWO DWO DWO
Model Contents Item No. Specifications Selection Performance Pump Sectional Motor Chart Curve Dimensions View Data 506 704 006 70 70 705 708 709 7 006 706 4006 707 www.pumpsebara.com 700 (t) 80 7-5005
More informationshort name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum
with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/
More informationPOWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
More informationJASON URETHANE POWER TRANSMISSION BELTS
JSON URETHNE POWER TRNSMISSION BELTS UNIFLE BELTS Manufactured in urethane with continuous helically wound steel cable cords, Jason's Uniflex belts are ideal for situations where high stress and load demands
More informationOn Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
More informationQuad. Indoor recessed. ø1.69" 3.11" 2.36" 2.36" IP40 IP44. max 6W - max 500mA. max 6W - max 500mA. QD1232 N Black. B White.
Quad Indoor recessed Quad 1.0 Quad 1.2 ø1.69" ø1.69" 3.07" 3.11" 5.91"x5.91" 1.97"x1.97" 5.91"x5.91" 1.97"x1.97" 0.44 lbs 0.44 lbs IP44 0.44 lbs QD1032 E QD1032 6 QD1232 D E QD1032 E QD1032 6 QD1232 D
More informationMT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR
MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES
More informationAPPROVED ALL DIMENSIONS SUBJECT TO 1/4" TOLERANCES
SPECIFICATIONS SHELL WEIGHT: 2700 LBS. WATER WEIGHT: 8094 LBS. TOTAL SHELL & WATER WEIGHT: 10794.4 LBS. WATER VOLUME: 129.8 Cu.Ft. 10' ID 12'-11" OD WATER GALLONS: 971 SURFACE AREA: 58.4 SQ. FT. GAL. 8"
More informationSCHMIDT Toggle Presses
SCHMIDT Toggle Presses The high force at the end of stroke, just where it is important Do you need a high force at the end of stroke for materialtransforming processes? Then, SCHMIDT Toggle Presses are
More informationHygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
More informationMO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
More informationRemote Oil Filter Mount
Remote Oil Filter Mount Part No. ENV-140 Made in USA Important: Read these instructions in their entirety prior to installation. Rev 170925 Parts List 1 x ENV-140 remote filter mount 1 x M22x1.50 oil filter
More information230 kv Aluminum Bolted Couplers TYPE BCX-AA. Ordering Information. or
20 kv Aluminum 20 kv Aluminum TYPE CX-AA Variable Cable Tee Tap and Straight Connector A clamp type tee connector, or reducer connector for joining two cables. This connector allows for multiple applications,
More informationTABLE OF CONTENTS BURNDY. Hardware. DURIUM Hardware Bolts Nuts Flat Washers Split Lockwashers Internal Tooth Lockwashers D-2 D-3 D-3 D-3 D-3
URNDY DURIUM olts Nuts Flat Washers Split Lockwashers Internal Tooth Lockwashers TALE OF CONTENTS D-2 D-1 Aluminum olts Nuts Flat Washers Split Lockwashers Galvanized Steel olts Nuts Flat Washers Internal
More informationPOWER TRANSMISSION PARTS. Spare parts in-stock when you need them. Metric Timing Pulleys & Belt Drives.
POWER TRNSMISSION PRTS Spare parts in-stock when you need them Metric Timing Pulleys & elt Drives Metric T & T Pulley & elt Drives The metric T & T series was created to meet industries need for polyurethane
More information300 SERIES STANDARD DUTY CURVED TRACK
300 SERIES STANDARD DUTY CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301A 301W 316A 316W 328A 328W 300B SERIES BLACK CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301AB 301WB 316AB 316WB 328AB 328WB SINGLE CARRIER
More informationPLATEFORM MOUNTS Page 19 of 124
PLATEFORM MOUNTS Page 19 of 124 Plateform Mounts Featuring: Plateform Mounts Heavy-Duty Plateform Mounts Multiplane Mounts LORD Plateform Mounts provide effective isolation against vibration. The contour
More informationSection S. weight tables
Section S weight tables steel bars Rounds... 2-3 Squares... 3 Hexagons... 4 Octagons... 4 Flats... 5-8 Steel circles... 9-10 Steel and Aluminum weight formulas... 11 Bars, Tubing, Circles, Rings Weight
More informationLIEBHERR LTM Ton HYDRAULIC CRANE
www.baycrane.com LIEBHERR LTM 1250-6.1 300 Ton HYDRAULIC CRANE New York City 11-02 43rd Avenue Long Island City, NY 11101 Tel: 718 392 0800 Fax: 718 349 6681 info@baycrane.com Long Island 389 New South
More informationWELD PLATE GAUGE TOOL INSTRUCTIONS
WELD PLATE GAUGE TOOL INSTRUCTIONS Introduction The weld plate gauge tool has been developed in order to verify that upon reception and installation of the weld plate they are within acceptable tolerance.
More informationDETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II
INCH-POUND 08 December 2009 DETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II This specification is approved for use
More informationCast-In Heaters Large Thermo-Platens
Large Thermo-Platens Engineered Solutions With Advanced Technology in Cast-In Thermo-Platens Tempco specializes in innovative engineering and manufacturing of thermal components. Coupled with our diverse
More informationANGLgear. right angle drives Inch and Metric Series. The Original Right Angle Gear Drive Made in the U.S.A.
ANGLgear right angle drives Inch and Metric Series The Original Right Angle Gear Drive Made in the U.S.A. INDEX Intro to ANGLgear Inch & Metric Series pg. 2-3 2 Flange Units, Inch Series pg. 4 3 Flange
More informationTIMING PULLEY MURATECH ENGINEERING COMPANY NEW EDITION 2012 WORKS: CONTACT: VISIT US:
NEW EDITION 2012 MURATECH ENGINEERING COMPANY TIMING PULLEY WORKS: PLOT NO, S/5, S/6, SIDDHIVINAYAK INDUSTRIAL ESTATE, NEAR ODHAV POLICE STATION, ODHAV G.I.D.C., AHMEDABAD-352415 GUJARAT (INDIA). CONTACT:
More informationGates Poly Chain GT 2 Sprocket Specifications
Gates Poly Chain GT 2 Specifications 2D and 3D Drawings are available at www.gates.com/designview 64 Gates Corporation www.gates.com/pt Stock 8mm Gates Poly Chain GT 2 Specifications of Teeth Pitch O.D.
More informationMTB 42 Belt Driven Linear Actuator
LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features
More informationDETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT
INCH-POUND 16 February 2010 SUPERSEDING AN818 Rev 19 15 June 1994 DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT This specification is approved for use by all Departments and Agencies of the Department
More informationRACK AND PINION PNEUMATIC ACTUATORS, SERIES DC DOUBLE ACTING AND SERIES DJ SPRING RETURN
RACK AND PINION PNEUMATIC ACTUATORS, SERIES DC DOUBLE ACTING AND SERIES DJ SPRING RETURN 6 DC/DJ 20 Issue 10/98 FEATURES Dual-piston rack and pinion design for compact construction, symmetric mounting
More informationKOENIG-expander CV PLUGS THE WORLD S LEADING SEALING SYSTEM
KOENIG-expander CV PLUGS THE WORLD S LEADING SEALING SYSTEM 2011 JOINED TO LAST. Table of Contents CV 143 - English Anodized Aluminum Sleeve, Stainless Steel Ball CV 163 - English Allodined Aluminum Sleeve,
More informationConnecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
More informationEasy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
More informationBALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Lc T. LENGTH La [mm]
BALL SCREW LINEAR ACUAOR BSA 08 OVERALL DIMENSIONS La = + Stroke Stroke Rear bracket SP Pin Stroke end reed switches FCM Motor cable length 0.3 m SROKE CODE SROKE LENGH La MASS [Kg] C100 100 327 427 296
More informationHARDWARE SET SCREWS M8 X 6 (USED COMMONLY IN SCORES) SET SCREWS M6 X 5 (USED COMMONLY IN SCORES) OTC #OTC M8 OTC #OTC M6
HARDWARE SET SCREWS M8 X 6 (USED COMMONLY IN SCORES) SET SCREWS M6 X 5 (USED COMMONLY IN SCORES) Brass tip alloyed steel black finish. 6000 BEARING 10MM SHIELD OTC #OTC-9001-0-M8 OTC #OTC-9002-0-M6 OTC
More informationAerospace Standard Tube Size and Variable Diameter V-Band Couplings. Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant
Aerospace Standard Tube Size and Variable Diameter V-Band Couplings Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant V-Band Couplings Standard Tube Size and Variable Diameter
More informationLINEAR MOTION SYSTEM COMPONENTS
R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEM COMPONENTS LINEAR MOTION SYSTEM COMPONENTS PIC Design has added a most comprehensive selection of precision components for linear motion applications.
More informationKINTRIM. Floor Covering Metal Moldings Catalog. Customer Service: Orders and Inquiries: TELEPHONE FAX
KINTRIM Floor Covering Metal Moldings Catalog Customer Service: Orders and Inquiries: TELEPHONE 1-800-323-8314 FAX 1-573-359-2814 FINISHES AND COLORS: Finishes and colors are designated by letters preceding
More informationBringing Component Parts Together
Bringing Component Parts Together About Concentric International Concentric International connects retail, wholesale and original equipment manufacturers (OEM) with the value of global sourcing for products
More informationSection VIII. Parts Lists and 3-D Drawings. EAF Conveyor - Assembled View
EAF Conveyor - Assembled View 54 EAF Conveyor - Dimensional Drawing 15.4" 7.4" BW+14.2" BW+9" 12.6" 22" Leg #1 A 15" Leg #2 4" BW+4.1" BW 3.4" Discharge Belt Height 4.2" Infeed Belt Height 1.5" 55 56 EAF
More informationIf you are modeling a railroad in the period
Build a 1:20.3-scale ice-cream wagon by Ted Stinson Wiscasset, Maine Plan set #87 If you are modeling a railroad in the period prior to 1920, you will need a supply of horse-drawn vehicles. The ice-cream
More informationSERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.
1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,
More informationGatesFacts Technical Information Library Gates Compass Power Transmission CD-ROM version 1.2 The Gates Rubber Company Denver, Colorado USA
Specialized Synchronous Belts David E. Roos Machine Design June 8, 1989 Uncommon belts perform operation that standard belts cannot. And if an unusual design is not readily available, one can be made to
More informationDEMCO. Since North Pearl Street Albany, NY (800) (518) FAX: (518)
DEMCO Since 1932 413 North Pearl Street Albany, NY 12201 (800) 833-2343 (518) 434-3147 FAX: (518) 434-1288 www.demco-cmp.com Model B-1 Variable Hi-Speed Most versatile grinder available. Finish gold or
More informationDIAPHRAGM PUMPS & ACCESSORIES
DIAPHRAGM PUMPS & ACCESSORIES WWW.COMETPUMPS.COM Why Use a Diaphragm Pump? Can be run dry. Self-Priming. Large capacity oil bath crank case separates chemical from internal seals. Compatible with a wide
More informationBillet Aluminum Alt/Gen Pulley Made from 6061 T6, available in Chrome or Anodized Black, and includes 8 Shims for belt adjustment.
Billet Aluminum Alt/Gen Pulley Made from 6061 T6, available in Chrome or Anodized Black, and includes 8 Shims for belt adjustment. CB s Billet Aluminum Alt/Gen Pulley Hex Nut & Spacers are also available.
More informationMAST LED SPREADER LED BOOM LED CABIN DENMARK
MAST LED SPREADER LED BOOM LED MAST LED 6900 SERIES LED mast light for larger yachts. The powerfull LEDs illuminate with a minimum of power consumption. The lights are made of turned aluminum. The surface
More informationFan Coils Valve packages general data: V-D1
Fan Coils Valve packages general data: V-D1 Zehnder Rittling Console and High Capacity Fan Coils have standard valve packages available as a factory built assembly and field-installed option for the main
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationSolutions for Specialized Folding
PARTS CATALOG VOL. 3 Solutions for Specialized Folding TABLE OF CONTENTS 53CM Rollers...1 43CM Rollers...1 Roller Levers...1 Bore Scores...2 Bushing Blocks...3 Check Nut...3 Compression Springs...3 Seat
More informationPresby Steel, LLC. 143 East Milan Road Berlin, NH FAX:
143 East Milan Road 603-752-3022 FAX: 603-752-2821 1 S BEAMS (I Beams) Conforms to ASTM A36 Designation Web Depth/Inches Thickness Flange in Inches Area x Wt./Ft./Lbs. in Inches Width Thickness Sq. In.
More informationMT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationNASA Lunabotics Competition BP-1 Excavating Autonomous Rover Evan Carroll, Andrew Bolton, Ben Bennett, Nalin Randeniya, Nathaniel Greenberg Dr.
BP-1 Excavating Autonomous Rover Evan Carroll, Andrew Bolton, Ben Bennett, Nalin Randeniya, Nathaniel Greenberg Dr. Ramesh Varahamurti Team Members and Faculty Advisor Team Members (From Left to Right)
More informationSIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
More informationGuy Attachments. P151X or P152X. Measurements (in) Overall Length (in) P133AX 3 15/16 1 5/8 13/16 x 1 2 1/2 2 7/8 5 1/
Provide economical and effi cient means of fastening guys to poles Well rounded wire grooves protect the strand from damage Wherever possible, installation should be made under the head of a machine bolt
More informationSolutions for Specialized Folding
PARTS CATALOG VOL. 4 Solutions for Specialized Folding TABLE OF CONTENTS Folding Roller Rear...1 Modified Upper Fold Roller...1 Female Knife Shaft...1 Roller Levers...1 Bore Scores...2 Bushing Blocks...3
More informationPlateform Mounts Heavy Duty Plateform Mounts Multiplane Mounts
Featuring: Plateform Mounts Heavy Duty Plateform Mounts Multiplane Mounts Lord Plateform Mounts provide effective isolation against vibration. The contour of the flexing element was developed to provide
More informationSand Trap Louvers OSTL 300 SERIES. Sand Trap Louvers
Model : OSTL GI 341 Description: OPTIMA make Sand Trap Louver is used as pre-filter for the protection of air conditioning plants in area exposed to extreme levels of industrial pollution. It has a high
More informationUT SERIES PNEUMATIC ROTARY ACTUATORS
UT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
More informationHepcoMotion MHD Heavy Duty Track Roller Guidance System
Motion Without Limits HepcoMotion MHD Heavy Duty Track Roller Guidance System product overview The HepcoMotion MHD system provides an accurate, durable and low friction linear guide which is particularly
More informationCoupling Options for Every Application
Coupling Options for Every Application Bellows Couplings High torsional rigidity, low inertia, zero backlash and misalignment compensation Can be used at temperatures up to 570 F without any limitations
More informationSpace Saver. Space Saver Actuators. Air Actuated 0700 Series
Actuators Air Actuated 0700 Series HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com Space Saver Air Actuated
More informationLM Actuator GL. Low Cost Simple Actuator LM Assembly Kit Also Available NEW. BERG AB Тел. (495) , ф.
www.thk.ru BERG AB thk@thk.ru Тел. (9)-727-22-72, ф. (9)-223-3071 NEW LM Actuator GL Low Cost Simple Actuator LM Assembly Kit Also Available CATALOG No. 17-E www.thk.ru BERG AB thk@thk.ru Тел. (9)-727-22-72,
More informationXKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoHS and REH DIMENSION L: 16mm min SIZE D MAX H MAX d+/-0.05 E
More informationTORQUE HTD - CMT MUSTANG 8M - 14M SYNCHRONOUS BELT - CHD CMT APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
TORQUE HTD - CMT Performance index These heavy-duty synchronous belts are specifically designed for high torque applications at low speed. TORQUE belts are among the best performing HTD profiled belts
More informationFlex Finger Tooling 100/125 Series
Flex Finger Tooling 100/125 Series FLEX 100/125 Finger Tooling allows quick and easy changeover of tools between new die sets. Our modular components are simple to configure due to the ability to adjust
More informationRail Vehicle Systems ... PC Rev. P (1/4/18) -en ... Parts Catalog. DB20 Emergency Portion (Aluminum)
Rail Vehicle Systems...... PC-775871 Rev. P (1/4/18) -en...... Parts Catalog DB20 Emergency Portion (Aluminum) EP Parts Catalog Contact address New York Air Brake 748 Starbuck Avenue Phone: +1 315 786
More informationRemote Oil Filter Mount with Integrated Thermostat
Remote Oil Filter Mount with Integrated Thermostat Part No. ENV-170 Made in USA Important: Read these instructions in their entirety prior to installation. Rev 170922 Parts List ITEM QUANTITY PART # DESCRIPTION
More informationLength: L. Outer Dia. : D. Bore 2: d2. Bore 1: d1. BF Series
Page 1 BF Jaw Coupling Surface Finish Available Body Sleeve Body Sleeve Aluminium Alloy Polyurethane Anodic oxidation None Clamp Screw Coupling assembled by pressing a polyurethane sleeve into hubs on
More informationTemperature Sensing MI Cable Thermocouple Assemblies. Series TCM Multipoint Thermocouple Assemblies. View Product
Series TCM Multipoint Thermocouple Assemblies Multipoint Thermocouples are used in a broad range of processes and installations to monitor the temperature in multiple positions or elevations. These sensors
More information1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
More informationVALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS
VALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS The Jamesbury Valv-Powr VPVL double-opposed piston actuators combine the benefits of high cycle
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationIndex. H&O DIE SUPPLY, INC Ejector Pins-Nitrided-Parallel-Inch. Ejector Pins-Nitrided-Parallel-Metric
Index B2 B12 Ejector Pins-Nitrided-Parallel-Inch Ejector Pins-Nitrided-Parallel-Metric B19 B13 D-HeadEjector Pins Ejector Pins-Nitrided-Shoulder-Metric B3 B14 Ejector Pins-Nitrided-Shoulder-Inch Ejector
More informationCHAIN ENDS acc. DIN 764 / 766 Dimensions
CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b
More informationTension Cords. HPL high performance cords: the cord cross section is increased compared with standard. This results in a lower belt
www.sitspa.com ELATECH M and V The timing elts manufactured y ELATECH have een designed to comply with every need of the design engineer in linear motion, power transmission and in conveying applications
More informationMechanical. Power Transmission. Timing Pulley Catalogue. Muratech Engineering Company. Products. Delivering Quality Since 1997
Mechanical Power Transmission Products Timing Pulley Catalogue Muratech Engineering Company COMPANY PROFILE Muratech Engineering Company is Leading manufacturing company of Mechanical Power Transmission
More informationfor flex design of MOTION GUIDE Journal Bearing
MOTION GUIDE for flex design of Motion Guide Systems provide the maintenance-free and smooth running of V-shaped rolling bearings fitted on both sides of flat rail. Various combinations of components are
More informationAluminum HONDA Block Technical Notes
Aluminum HONDA Block Technical Notes Deck Height 212mm / 8.346" STD B-16 / B-18 226mm / 8.898" STD B-20 Bores 81.5mm (3.209") = 81.23mm unfinished 84.5mm (3.327") = 83.31mm unfinished Main Bearing Journal
More informationHonda CRF 450 R SOHC 4v
.432/.350 292 /294 260 /255 415/416 The "MYSTO" cam designed for race use ONLY. Works good for big bore applications. Requires Exhaust System, High Compression Piston, Larger Diameter Followers, Shortened
More information2M804 Push-Pull Receptacles Protection Caps Ordering Guide for 2M
Push-Pull Receptacles Protection aps Ordering Guide for 2M667-202 Push-Pull Protective aps are available in plug and receptacle versions. Protective caps keep the connector interface dry and clean while
More information2.5 Power Rack with High Volume Pump
2.5 Power Rack with High Volume Pump This system is also used on Class 1 and 10 desert race cars and has won the Baja race many times over. Now days sand cars are bigger and faster than ever before. They
More information기업부설연구소. SUNG-IL Ultra-precision Couplings Connecting Shaft Support Units F.A. Units A.P. Lock
기업부설연구소 SUNGIL Ultraprecision Couplings Connecting Shaft Support Units F.A. Units A.P. Lock SI. CO mark(trademark : 4020120061376) indicates that the authenticity is certified. SJC (Trademark : 4020120044881)
More informationRoller chains TPM - QRC pag. 40 Roller chains RCX pag. 43 Conveyor chains CRT pag. 45 Chain guide rails in polyethylene pag. 48
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Motor cable length 0.3 m. T [mm]
ACME SCREW LINEAR ACTUATOR ATL 02 Stroke Actuator with DC motor La =Lc + Stroke Lc T OVERALL DIMENSIONS Rear bracket SP Pin Actuator with or 3-phase motor Capacitor Stroke end reed switches FCM Motor cable
More information