AT5 Timing Belt Pulleys
|
|
- Baldric Cameron
- 5 years ago
- Views:
Transcription
1 Quality 5 mm AT5 (.1969") MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize (.8) NOTE: Dimensions in are in inches. QPMAT5A16010F06 QPMAT5A16011F06 QPMAT5A16012F06 QPMAT5A16013F06 QPMAT5A16014F06 QPMAT5A16015F06 QPMAT5A16016F06 QPMAT5A16017F06 QPMAT5A160F06 QPMAT5A16019F06 QPMAT5A16020F06 QPMAT5A160F06 QPMAT5A16022F06 QPMAT5A16023F06 QPMAT5A16024F06 QPMAT5A16025F06 QPMAT5A16026F06 QPMAT5A160F (.2362) Tolerance (): 6 mm ( ) O.D. Tolerance: 10 to 16 teeth to teeth NOTE: AT5 Profile Per DIN 77-2 Rev 6/ (.632) (.695) (.758) (.8) (.884) (.947) 25.6 (1.008).2 (1.071) 28.8 (1.134) 30.4 (1.197) (1.325) (1.388) 36.8 (1.449) 38.4 (1.512) (1.573) 41.6 (1.638) 43.2 (1.701) (.593) (.656).25 (.719) (.781).45 (.844) (.907) 24.6 (.969) 26.2 (1.031).8 (1.094) 29.4 (1.157) 31 (1.220) (1.285) (1.348) 35.8 (1.409) 37.4 (1.472) (1.533) 40.6 (1.598) 42.2 (1.661) 11 (.433) 16 (.630) 19 (.748) 22 (.866) 30 (1.1) 19.5 (.768) (.8) 28 (1.102) 41 (1.614) 43 (1.693) AT5 TIMING BELT PULLEYS 1-2
2 AT5 TIMING BELT PULLEYS Quality 5 mm AT5 (.1969") MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize (.8) QPMAT5A16028F08 QPMAT5A16029F08 QPMAT5A16030F08 QPMAT5A16032F08 QPMAT5A16034F08 QPMAT5A16035F08 QPMAT5A16036F08 QPMAT5A16037F08 QPMAT5A16038F08 QPMAT5A16040F08 QPMAT5A16042F Tolerance (): 8 mm O.D. Tolerance: 28 to 30 teeth to 42 teeth NOTE: AT5 Profile Per DIN 77-2 Rev 6/ (1.762) (1.825) 47.9 (1.886) 51.1 (2.012) 54.3 (2.138) 55.9 (2.201) (2.262) (2.325) (2.388) (2.514) (2.640) NOTE: Dimensions in are in inches (1.722) (1.785) 46.9 (1.846) 50.1 (1.972) 53.3 (2.098) 54.9 (2.161) (2.222) (2.285) (2.348) (2.474) (2.600) 51 (2.008) 52 (2.047) 54 (2.126) 1-228
3 Quality 5 mm AT5 (.1969") MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize (.8) NOTE: Dimensions in are in inches. QPMAT5A16044N08 QPMAT5A16045N08 QPMAT5A16046N08 QPMAT5A16048N08 QPMAT5A16050N08 QPMAT5A16060N08 QPMAT5A16072N08 QPMAT5A16080N08 QPMAT5A16090N08 QPMAT5A16100N Tolerance (): 8 mm O.D. Tolerance: 44 to 60 teeth to 100 teeth NOTE: AT5 Profile Per DIN 77-2 Rev 6/ (2.764) 71.8 (2.8) 73.4 (2.890) (3.014) 79.7 (3.138) (3.766) (4.5) 1.45 (5.0) (5.648) (6.6) 69.2 (2.724) 70.8 (2.787) 72.4 (2.850) (2.974) 78.7 (3.098) (3.726) (4.478) (4.978) (5.608) (6.236) AT5 TIMING BELT PULLEYS 1-229
4 AT5 TIMING BELT PULLEYS Quality 5 mm AT5 (.1969") MATERIAL: AISI 1045 Steel FINISH: Black Oxide (.8) NOTE: Dimensions in are in inches. QPMAT5S16010F06 QPMAT5S16011F06 QPMAT5S16012F06 QPMAT5S16013F06 QPMAT5S16014F06 QPMAT5S16015F06 QPMAT5S16016F06 QPMAT5S16017F06 QPMAT5S160F06 QPMAT5S16019F06 QPMAT5S16020F06 QPMAT5S160F06 QPMAT5S16022F06 QPMAT5S16023F06 QPMAT5S16024F06 QPMAT5S16025F06 QPMAT5S16026F06 QPMAT5S160F (.2362) Tolerance (): 6 mm ( ) O.D. Tolerance: 10 to 16 teeth to teeth (.632) (.695) (.758) (.8) (.884) (.947) 25.6 (1.008).2 (1.071) 28.8 (1.134) 30.4 (1.197) (1.325) (1.388) 36.8 (1.449) 38.4 (1.512) (1.573) 41.6 (1.638) 43.2 (1.701) (.593) (.656).25 (.719) (.781).45 (.844) (.907) 24.6 (.969) 26.2 (1.031).8 (1.094) 29.4 (1.157) 31 (1.220) (1.285) (1.348) 35.8 (1.409) 37.4 (1.472) (1.533) 40.6 (1.598) 42.2 (1.661) 11 (.433) 16 (.630) 19 (.748) 22 (.866) 30 (1.1) 19.5 (.768) (.8) 28 (1.102) 41 (1.614) 43 (1.693) NOTE: AT5 Profile Per DIN 77-2 Rev 6/
5 Quality 5 mm AT5 (.1969") MATERIAL: AISI 1045 Steel FINISH: Black Oxide (.8) QPMAT5S16028F08 QPMAT5S16029F08 QPMAT5S16030F08 QPMAT5S16032F08 QPMAT5S16034F08 QPMAT5S16035F08 QPMAT5S16036F08 QPMAT5S16037F08 QPMAT5S16038F08 QPMAT5S16040F08 QPMAT5S16042F Tolerance (): 8 mm O.D. Tolerance: 28 to 30 teeth to 42 teeth NOTE: AT5 Profile Per DIN 77-2 Rev 6/ (1.762) (1.825) 47.9 (1.886) 51.1 (2.012) 54.3 (2.138) 55.9 (2.201) (2.262) (2.325) (2.388) (2.514) (2.640) NOTE: Dimensions in are in inches (1.722) (1.785) 46.9 (1.846) 50.1 (1.972) 53.3 (2.098) 54.9 (2.161) (2.222) (2.285) (2.348) (2.474) (2.600) 51 (2.008) 52 (2.047) 54 (2.126) AT5 TIMING BELT PULLEYS 1-231
6 AT5 TIMING BELT PULLEYS Quality 5 mm AT5 (.1969") MATERIAL: AISI 1045 Steel FINISH: Black Oxide (.8) NOTE: Dimensions in are in inches. QPMAT5S16044N08 QPMAT5S16045N08 QPMAT5S16046N08 QPMAT5S16048N08 QPMAT5S16050N08 QPMAT5S16060N08 QPMAT5S16072N08 QPMAT5S16080N08 QPMAT5S16090N08 QPMAT5S16100N Tolerance (): 8 mm O.D. Tolerance: 44 to 60 teeth to 100 teeth NOTE: AT5 Profile Per DIN 77-2 Rev 6/ (2.764) 71.8 (2.8) 73.4 (2.890) (3.014) 79.7 (3.138) (3.766) (4.5) 1.45 (5.0) (5.648) (6.6) 69.2 (2.724) 70.8 (2.787) 72.4 (2.850) (2.974) 78.7 (3.098) (3.726) (4.478) (4.978) (5.608) (6.236) 1-232
MXL Timing Belt Pulleys
MXL TIMING BELT PULLEYS Quality 15 15 MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize QPMMXLA25015F03 QPMMXLA250F03 QPMMXLA2501F04 QPMMXLA25020F04 15 1 20 3 (.111) Tolerance : 3 mm
More informationMT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR
MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES
More informationNumber of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
More informationintroduction WARRAnTY / DiScLAiMeR OF unstated WARRAnTieS / LiMiTATiOn OF LiABiLiTY Warranty. Disclaimer of unstated warranties.
BeLLOWS couplings Introduction Ruland Manufacturing Co., Inc. has been supplying carefully made products since 1937. We have manufactured everything from bicycle pumps to high pressure valves, including
More informationProduct Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
More informationDWO DWO DWO DWO
Model Contents Item No. Specifications Selection Performance Pump Sectional Motor Chart Curve Dimensions View Data 506 704 006 70 70 705 708 709 7 006 706 4006 707 www.pumpsebara.com 700 (t) 80 7-5005
More informationshort name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum
with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/
More informationHygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
More informationPulley pitch range. Pulley pitch range - Overview. Pulleys and Components. Selftracking Series. Standard Pulley ATL-Series. T-Series.
Pulley pitch range Pulley pitch range - Overview AN-Series A-Series AN 10 AN 12.7 AN 20 Selftracking SFA-Series SFA 10 SFA 15 SFA 20 A 3 A 5 A 10 A(S) 15 A 20 HD/SD-Series HD 3M*) HD 5M*) HD 8M*) HD 14M*)
More informationHonda CRF 450 R SOHC 4v
.432/.350 292 /294 260 /255 415/416 The "MYSTO" cam designed for race use ONLY. Works good for big bore applications. Requires Exhaust System, High Compression Piston, Larger Diameter Followers, Shortened
More informationSERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.
1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,
More informationMO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
More informationEJP SERIES Right-angle Worm
EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals
More informationRemote Oil Filter Mount
Remote Oil Filter Mount Part No. ENV-140 Made in USA Important: Read these instructions in their entirety prior to installation. Rev 170925 Parts List 1 x ENV-140 remote filter mount 1 x M22x1.50 oil filter
More informationTRI TOOL INC. TECHNICAL SPECIFICATION MODEL 636SB LOW PROFILE CLAMSHELL MARCH,1997
TRI TOOL INC. TECHNICAL SPECIFICATION MODEL 636SB LOW PROFILE CLAMSHELL MARCH,1997 MODEL 636SB Low Profile Clamshell Description: The 636SB Low Profile Clamshell is a split-frame pipe lathe for severing
More informationGIRTH GEARS AND PINIONS OVERVIEW
GIRTH GEARS AND PINIONS OVERVIEW Girth Gears & Pinions Tubular mills and rotary kiln operations are the life support system for the processing industries, and necessitates reliable and uninterrupted operations.
More informationS3- W ASHER PRODUCTS
STAINLESSFASTENERS PRODUCTCATALOGUE 07 Flat Round Washers - JG Standard O.D Thickness M3 7.0 0.5 3624 M4 9.0 0.8 3625 M5 10.0 0.8 3627 M6 12.5 1.2 3628 4613 M8 17.0 1.2 3629 4615 M10 21.0 1.2 3630 4618
More informationDETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT
INCH-POUND 16 February 2010 SUPERSEDING AN818 Rev 19 15 June 1994 DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT This specification is approved for use by all Departments and Agencies of the Department
More informationDIN 950. Spoked handwheels. d 2. l 3. d 3. l 1. Operating elements. Cast iron / Aluminium. SPECIFICATION Types
DIN 0 RoHS Cast iron / Aluminium SPECIFICATION Types Type A: without handle Type F: with fixed handle Type D: with revolving handle Bore codes Version B: without keyway Version K: with keyway Version V:
More informationGates Poly Chain GT 2 Sprocket Specifications
Gates Poly Chain GT 2 Specifications 2D and 3D Drawings are available at www.gates.com/designview 64 Gates Corporation www.gates.com/pt Stock 8mm Gates Poly Chain GT 2 Specifications of Teeth Pitch O.D.
More informationMTB 42 Belt Driven Linear Actuator
LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features
More information300 SERIES STANDARD DUTY CURVED TRACK
300 SERIES STANDARD DUTY CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301A 301W 316A 316W 328A 328W 300B SERIES BLACK CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301AB 301WB 316AB 316WB 328AB 328WB SINGLE CARRIER
More informationCast-In Heaters Large Thermo-Platens
Large Thermo-Platens Engineered Solutions With Advanced Technology in Cast-In Thermo-Platens Tempco specializes in innovative engineering and manufacturing of thermal components. Coupled with our diverse
More informationSection VIII. Parts Lists and 3-D Drawings. EAF Conveyor - Assembled View
EAF Conveyor - Assembled View 54 EAF Conveyor - Dimensional Drawing 15.4" 7.4" BW+14.2" BW+9" 12.6" 22" Leg #1 A 15" Leg #2 4" BW+4.1" BW 3.4" Discharge Belt Height 4.2" Infeed Belt Height 1.5" 55 56 EAF
More informationTORQUE HTD - CMT MUSTANG 8M - 14M SYNCHRONOUS BELT - CHD CMT APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
TORQUE HTD - CMT Performance index These heavy-duty synchronous belts are specifically designed for high torque applications at low speed. TORQUE belts are among the best performing HTD profiled belts
More informationradius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING The Series A double acting and spring return pneumatic rack and pinion actuators from Radius offer uncompromising standards of
More informationradius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING Seals: Buna-N Nitrile is standard. Optional materials are available. The Series A double acting and valve and damper applications.
More informationPrecision Motion Control Pulleys
Precision Motion Control Pulleys EXPRESS SERVICE Automated design tools Instant quoting Fastest delivery QUALITY Belt and pulley know how Consistent design standards World class LEAN manufacturing Precise
More informationASSEMBLY SYSTEMS. Assembly systems. 387
Assembly systems Assembly systems ASSEMBLY SYSTEMS Series Size Page Assembly systems Pillar profile modular system Pillars Ø 20 mm 390 Pillars Ø 35 mm 394 Pillars Ø 55 mm 398 www.schunk.com 387 Assembly
More informationCHAIN ENDS acc. DIN 764 / 766 Dimensions
CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b
More informationLinear drives SLG, flat design
Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design
More informationMT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
More informationSIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationPRECISION COMPRESSION MOUNTING CLAMP SYSTEMS
Wakefield Engineering compression pack heat sinks and clamp systems provide electrical and industrial equipment manufacturers with complete system solutions for proper installation and heat dissipation
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationHonda CRF 450 R (2008) SOHC 4v
.418/.342 284 /298 261 /262 242/921 Race profile designed for extreme acceleration with added mid and upper end performance. Requires Exhaust System, High Compression Piston, Larger Diameter Followers,
More informationStainless Spring Steel Strip
Stainless Spring Steel Strip Tolerances according to DIN EN ISO 9445-2:2010-06 Chart 1 (fine tolerance) or as agreed Grade No.* Grade Name Standard Tensile Strength (Rm) Comparable 1.4301 X 5 CrNi 18-10
More informationRACK AND PINION PNEUMATIC ACTUATORS, SERIES DC DOUBLE ACTING AND SERIES DJ SPRING RETURN
RACK AND PINION PNEUMATIC ACTUATORS, SERIES DC DOUBLE ACTING AND SERIES DJ SPRING RETURN 6 DC/DJ 20 Issue 10/98 FEATURES Dual-piston rack and pinion design for compact construction, symmetric mounting
More informationUT SERIES PNEUMATIC ROTARY ACTUATORS
UT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
More informationRemote Oil Filter Mount with Integrated Thermostat
Remote Oil Filter Mount with Integrated Thermostat Part No. ENV-170 Made in USA Important: Read these instructions in their entirety prior to installation. Rev 170922 Parts List ITEM QUANTITY PART # DESCRIPTION
More information1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
More information2 x 3/2 Way Valves Series S10
x / Way Valves Series S0 G/ and -In Connections OD 6 mm Actuation systems: Pneumatic Electrical pilot actuated Versions: x normally closed x normally open x normally closed and x normally open With external
More informationPOWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
More informationDETAIL SPECIFICATION SHEET CAP INSERT, ASSEMBLY, PRESSURE SEAL, FLARED TUBE FITTING
INCH-POUND Rev 13 7 August 2014 SUPERSEDING w/amendment 1 20 November 2013 DETAIL SPECIFICATION SHEET CAP INSERT, ASSEMBLY, PRESSURE SEAL, FLARED TUBE FITTING This specification is approved for use by
More informationHonda CRF 450 R SOHC 4v
.418/.342 284 /298 261 /262 242/921 Race profile designed to increase mid and upper end performance. Requires Exhaust System, High Compression Piston, Larger Diameter Followers, Shortened Valve Guides,
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationStretch & Glue Frame Price List January 2019
Frame January 2019 Gt 75 / dia-mini.75 Max Size: 18 Width: 3/4 Height: 3/4 Wall Thickness:.063 Weight per Ft:.2 Lbs 20 22 24 26 28 30 32 34 36 38 $ 18.75 18.95 19.15 19.35 19.55 19.75 19.95 20.20 20.45
More informationPowerGrip Timing Belt Drives
PowerGrip Timing Belt Drives Single Sided Belt Drive Systems PowerGrip Timing Belt drives operate on the tooth-grip principle, with the molded teeth the belt designed to make positive engagement with the
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationJASON URETHANE POWER TRANSMISSION BELTS
JSON URETHNE POWER TRNSMISSION BELTS UNIFLE BELTS Manufactured in urethane with continuous helically wound steel cable cords, Jason's Uniflex belts are ideal for situations where high stress and load demands
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationASSEMBLIES. Table of Contents C BERG
ASSEMBLIES Table of Contents GEARBOXES - WORM WHEEL AND HELICAL GEARS TECHNICAL DATA - SPEED REDUCERS..................... C 2 WORM & WORM WHEEL GEARS SHAFT SIZE - 1/8, 3/16 AND 1/4......................
More informationRE / Connection Elements for Compact Modules. The Drive & Control Company
RE 82 618/2003-01 Connection Elements for Compact Modules The Drive & Control Company Connection Elements Connection elements for compact modules allow the fast and easy adaptation to profiles and supports
More informationALUMINUM DISTRIBUTING, INC S.W. 2nd Ave. Ft. Lauderdale, FL Table of Contents
Table of Contents Page 2.........Equal & Unequal Angle Structural & Architectural Page 3.......................Flat Bar Structural Page 4.....................Flat Bar Architectural Page 5..... U Channel,
More informationHepcoMotion MHD Heavy Duty Track Roller Guidance System
Motion Without Limits HepcoMotion MHD Heavy Duty Track Roller Guidance System product overview The HepcoMotion MHD system provides an accurate, durable and low friction linear guide which is particularly
More informationAPEX DYNAMICS. Installation Instruction for Rack and Pinion
APEX DYNAMICS Installation Instruction for Rack and Pinion Overview Why it is so important? Installation of rack onto the machine 1. Installation and Connetction of racks 2. Installation of pinion onto
More information2210 Series Horizontal Conveyor
HFA 2210 Series Horizontal Conveyor The 2210 Horizontal Conveyor features a low profile yet extremely rigid anodized extruded aluminum frame angle adjustment of 0-30 degrees 2 ply, polyurethane, FDA approved
More informationThe EPSILON is based on the principle of measuring velocity in the pipe line, therefore the flow measurement is volumetric.
Typical Applications EPSILON Flowmeter The EPSILON flow meters measure the flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical and the power
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationCarbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationSKB-KP Series Direct Drive Bellows Safety Coupling
SKB-KP Series Direct Drive Bellows Bellows safety coupling with radial clamping hubs. Bellow compensates for axial, lateral and angular misalignment. Stainless steel bellow; aluminum and steel hubs; steel
More informationThe HSS drill bit range
Bosch Metal Drilling The HSS drill bit range www.bosch-professional.co.uk HSS Drill Bits range overview HSS PointTeQ HSS Ground HSS Impact HSS Cobalt Lifetime Speed Precision Features Fast Drilling in
More informationRollers and Roller Assemblies. Idler Rolls Dancer Roll Assembly Nip Roll Assembly S-Wrap Feed Roll Assembly Heated Roll
Rollers and Roller Assemblies Idler Rolls Dancer Roll Assembly Nip Roll Assembly S-Wrap Feed Roll Assembly Heated Roll Available coatings: 2 Outside diameter (nominal).250 Wall aluminum.250 Wall steel.250
More informationLINEAR SLIDES RECISION NDUSTRIAL OMPONENTS DESIGN. Phone: FAX:
R RECISION NDUSTRIAL OMPONENTS R LINEAR SLIDES 2. 4. 3. 1. Ball Slides 2. X, X-Y, X-Y-Z Positioners with Micrometers 3. Rails 4. Crossed Roller Slides 1. 2-1 TECHNICAL SECTION Typical coefficient of friction
More informationAPPROVED ALL DIMENSIONS SUBJECT TO 1/4" TOLERANCES
SPECIFICATIONS SHELL WEIGHT: 2700 LBS. WATER WEIGHT: 8094 LBS. TOTAL SHELL & WATER WEIGHT: 10794.4 LBS. WATER VOLUME: 129.8 Cu.Ft. 10' ID 12'-11" OD WATER GALLONS: 971 SURFACE AREA: 58.4 SQ. FT. GAL. 8"
More informationSCHMIDT Toggle Presses
SCHMIDT Toggle Presses The high force at the end of stroke, just where it is important Do you need a high force at the end of stroke for materialtransforming processes? Then, SCHMIDT Toggle Presses are
More informationCoupling Options for Every Application
Coupling Options for Every Application Bellows Couplings High torsional rigidity, low inertia, zero backlash and misalignment compensation Can be used at temperatures up to 570 F without any limitations
More informationTRU-TIME ADJUSTABLE CAM GEAR Part Number: BK & BK
TRU-TIME ADJUSTABLE CAM GEAR Part Number: 23-801BK & 23-802BK! WARNING: This installation is not for the mechanically challenged! If you are not mechanically inclined or do not understand the procedure
More informationTechnical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
More informationLow backlash planetary gearheads Economy
Low backlash planetary gearheads Economy LP + Economical multitalent Low backlash planetary gearhead with output shaft pplications in cyclic or continuous operation Torsional backlash 8 arcmin Ratio: 3-100
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationTensioners. Stock Program Type B, eccentric, toothed running surface. Polyurethane Timing Belt Drives
Polyurethane Timing elt Drives Tensioners Type, eccentric, toothed running surface Type s run on ball bearings. The bearings are grease lubricated and up to C will experience no reduction in grease life.
More informationCam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationOn Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
More informationBIRA TRADE BIRA TRADE
PRODUCT CATALOGUE 2016/2017 BIRA TRADE is a privately owned company specialising in development, manufacture and distribution of mechanical and electromechanical security solutions for access control systems.
More informationBelt Conveyors GUF-P MINI
Belt Conveyors GUF-P MINI Conveyor frame profiles mk 2075 mk 2100 mk 2150 22 The minimal install height, as well as the lower walls for direct placement of the conveyor on the machine bed, are ideal for
More informationDriver/Left Side Front Mounting Bracket (longer bracket) Front Mounting Bracket (longer bracket)
PARTS LIST: 1 Driver/Left Sidebar 4 1/2 x 1-1/2 OD x 1/8" Flat Washers 1 Passenger/Right Sidebar 4 1/2 Lock Washers 1 Driver/Left Mounting Bracket 10 s SIDEBAR 1 Passenger/Right Mounting Bracket 2 14mm
More information230 kv Aluminum Bolted Couplers TYPE BCX-AA. Ordering Information. or
20 kv Aluminum 20 kv Aluminum TYPE CX-AA Variable Cable Tee Tap and Straight Connector A clamp type tee connector, or reducer connector for joining two cables. This connector allows for multiple applications,
More informationSafety Coupling Overview
Safety Coupling Overview Safety couplings are used to minimize expensive damage when a collision occurs in a high performance servo drive system. When a collision occurs, the safety coupling will stop
More informationWW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
More informationTechnical Data Part-turn gearbox 2SP78
Part-turn gearbox 2SP78 Contents Page General data Mounting position, duty classifications, noise level, paint finish and corrosion protection, lubrication, degree of protection, ambient temperature 2
More informationTABLE OF CONTENTS BURNDY. Hardware. DURIUM Hardware Bolts Nuts Flat Washers Split Lockwashers Internal Tooth Lockwashers D-2 D-3 D-3 D-3 D-3
URNDY DURIUM olts Nuts Flat Washers Split Lockwashers Internal Tooth Lockwashers TALE OF CONTENTS D-2 D-1 Aluminum olts Nuts Flat Washers Split Lockwashers Galvanized Steel olts Nuts Flat Washers Internal
More informationINVOLUTE TOOLING CORPORATION
MANUFACTURERS OF DRIVES AND TRANSMISSIONS OFFICE: 13, JORBAGH, NEW DELHI - 110 003, INDIA, TEL: +91(011)24621453 FAX: +91(011) 24603609 WORKS: PLOT-65, SEC-27C, FARIDABAD - 121 003. INDIA, TEL: +91(0129)
More informationSeries 45 anti-rotation guide units
> Series 45 guide units CATALOGUE > Release 8.7 Series 45 anti-rotation guide units For cylinders DIN/ISO 6432 - ø2, 6, 20, 25mm For cylinders DIN/ISO 643 - ø32, 40, 50, 63, 80, 00mm» To be used with VDMA/
More informationPOWER TRANSMISSION PARTS. Spare parts in-stock when you need them. Metric Timing Pulleys & Belt Drives.
POWER TRNSMISSION PRTS Spare parts in-stock when you need them Metric Timing Pulleys & elt Drives Metric T & T Pulley & elt Drives The metric T & T series was created to meet industries need for polyurethane
More informationPLATEFORM MOUNTS Page 19 of 124
PLATEFORM MOUNTS Page 19 of 124 Plateform Mounts Featuring: Plateform Mounts Heavy-Duty Plateform Mounts Multiplane Mounts LORD Plateform Mounts provide effective isolation against vibration. The contour
More informationSection S. weight tables
Section S weight tables steel bars Rounds... 2-3 Squares... 3 Hexagons... 4 Octagons... 4 Flats... 5-8 Steel circles... 9-10 Steel and Aluminum weight formulas... 11 Bars, Tubing, Circles, Rings Weight
More informationFor the plastics machinery industry Fixed bayonet thermocouple Model TC47-FB
Electrical temperature measurement For the plastics machinery industry Fixed bayonet Model TC47-FB WIKA data sheet TE 67.24 Applications Plastics and rubber industry For direct installation into the process
More informationSIT TORqUE-FLEX - Narrow XP (ISO) - CSX
SIT TORqUE-FLEX - Narrow XP (ISO) - CSX Performance index XPZ - XPA - XPB - XPC MOULDED COG APPLICATIONS Narrow profile belts for compact, high power drives and high shock loading on short centers and
More informationLM SERIES LINEAR MODULE
LM SERIES LINEAR MODULE THE LM RODLESS LINEAR ACTUATOR RACO s LM Linear Modules are lightweight positioning elements, which can be easily configured into a wide variety of multiple axis motion systems.
More informationIA m tion - Pneumatic actuators. Description. Product features. Design properties
IA mtion Pneumatic actuators Description The rack and pinion pneumatic actuator IA Motion combines innovative design features with the latest technology, materials and protection coatings available, resulting
More informationWELD PLATE GAUGE TOOL INSTRUCTIONS
WELD PLATE GAUGE TOOL INSTRUCTIONS Introduction The weld plate gauge tool has been developed in order to verify that upon reception and installation of the weld plate they are within acceptable tolerance.
More informationLIFTING COLUMN LC2 PRODUCT DATA SHEET
PRODUCT DATA SHEET LIFTING COLUMN LC2 Features LC2 is a specially designed telescopic aluminum lifting column incorporating a LINAK 24 V or 12V DC linear actuator (LC28 or LC30) equipped with safety nut
More informationTHEATER CURTAIN TRACK SYSTEMS
THEATER CURTAIN TRACK SYSTEMS Theater curtain track systems T 200 KOMBI profile T 300 OMEGA profile Application area: For horizontally moving heavy curtains For backdrops For fly systems For sliding doors
More informationCLASSICA Imperial pitch - CD MXL - XL - L - H - XH SYNCHRONOUS BELT - - CHD CD APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
CLASSICA Imperial pitch - CD Performance index The CLASSICA synchronous belt, being designed with imperial pitch, is a valid and economical alternative solution in low/medium torque transmission systems.
More informationServomechkaramoottorit
Solutions for power transmission Servomechkaramoottorit www.konaflex.fi INDEX 1 Servomech 1. THE PRODUCT 1.1 SERVOMECH Linear Actuators......................... Page 2 1.2 SERVOMECH Linear Actuators range............................
More informationBelt Guides for Round Belts TDC
elt Guides for Round elts Materials STD : Polyethylene (U..M.W.Pe) Green ALTERNATIVE : 1000 lack Antistatic RM RMC h c h Pulleys & elts without C Section Slots NUMER h R5.0RM5 20 10 5.5 3.0 43.86 R6.3RM6
More information