TABLE OF CONTENTS BURNDY. Hardware. DURIUM Hardware Bolts Nuts Flat Washers Split Lockwashers Internal Tooth Lockwashers D-2 D-3 D-3 D-3 D-3
|
|
|
- Sydney Flynn
- 6 years ago
- Views:
Transcription
1 URNDY DURIUM olts Nuts Flat Washers Split Lockwashers Internal Tooth Lockwashers TALE OF CONTENTS D-2 D-1 Aluminum olts Nuts Flat Washers Split Lockwashers Galvanized Steel olts Nuts Flat Washers Internal Tooth Lockwashers Stainless Steel olts Nuts Split Lockwashers Flat Washers elleville Washers D-7 TMH Terminal Mounting Kits DURIUM Silicon ronze Stainless Steel D-8 D-8 DURIUM U-olts D-9
2 URNDY D-2 HARDWARE DATA RECOMMENDED TIGHTENING TORQUE The hardware used in connectors must be compatible with the connector material, have high mechanical strength and be corrosion resistant and correspond to NEMA recommendations. Copper alloy connectors have hardware made of DURIUM, which is URNDY s trade name for silicon bronze alloy ASTM99 type. This material was first introduced by URNDY in 1927 for use in outdoor construction, and today, is the standard throughout the industry. DURIUM OLT DURIUM and Steel Aluminum olt Rec. Torque (Inch Pounds) olt Rec. Torque (Inch Pounds) 1/ / / / / / / / /4-10 1,050 Aluminum connectors generally have aluminum alloy hardware. The bolts are 2024T4 and anodized to resist corrosion. The nuts are 6061T6, which is resistant to corrosion and does not require anodizing. oth nuts and bolts are lubricated to eliminate galling and to provide consistent clamping forces. To reduce or greatly exceed the recommended torque can adversely affect the performance of the connector. URNDY introduced silicon-bronze bolts, nuts and other hardware items on outdoor connector applications in Today the DURIUM trademark is a standard for this use. DURIUM bolts combine high strength with corrosion resistance. Heads have American Standard 25X50HEOX 1/4-20 1/2 25X62HEOX 1/4-20 5/8 25X75HEOX 1/4-20 3/4 25X100HEOX 1/ X125HEOX 1/ /4 25X150HEOX 1/ /2 25X200HEOX 1/ X250HEOX 1/ /2 25X300HEOX 1/ X50HEOX 5/ /2 31X62HEOX 5/ /8 31X75HEOX 5/ /4 31X100HEOX 5/ X125HEOX 5/ /4 31X150HEOX 5/ /2 31X175HEOX 5/ /4 31X200HEOX 5/ X250HEOX 5/ /2 31X300HEOX 5/ X50HEOX 3/8-16 1/2 38X62HEOX 3/8-16 5/8 38X75HEOX 3/8-16 3/4 38X88HEOX 3/8-16 7/8 38X100HEOX 3/ dimension and the threads are per American National Coarse Series, Class #2 fit. The silicon 38X125HEOX 3/ /4 38X150HEOX 3/ /2 38X175HEOX 3/ /4 38X200HEOX 3/ X225HEOX 3/ /4 38X250HEOX 3/ /2 38X275HEOX 3/ /4 38X300HEOX 3/ X325HEOX 3/ /4 38X350HEOX 3/ /2 38X400HEOX 3/ X450HEOX 3/ /2 38X500HEOX 3/ X150HEOX 7/ /2 44X200HEOX 7/ X75HEOX 1/2-13 3/4 50X100HEOX 1/ X125HEOX 1/ /4 50X150HEOX 1/ /2 50X175HEOX 1/ /4 50X200HEOX 1/ X225HEOX 1/ /4 50X250HEOX 1/ /2 50X275HEOX 1/ /4 bronze is per ASTM X300HEOX 1/ X325HEOX 1/ /4 50X350HEOX 1/ /2 50X375HEOX 1/ /4 50X400HEOX 1/ X450HEOX 1/ /2 50X500HEOX 1/ X550HEOX 1/ /2 50X600HEOX 1/ X100HEOX 5/ X125HEOX 5/ /4 62X150HEOX 5/ /2 62X175HEOX 5/ /4 62X200HEOX 5/ X225HEOX 5/ /4 62X250HEOX 5/ /2 62X275HEOX 5/ /4 62X300HEOX 5/ X325HEOX 5/ /4 62X350HEOX 5/ /2 62X400HEOX 5/ X450HEOX 5/ /2 62X500HEOX 5/ X600HEOX 5/ US: Canada:
3 URNDY DURIUM NUTS DURIUM hexagon regular nuts are nonmagnetic and are made to American Standard dimensions. American National Coarse Series threads. #2 fit. DURIUM FLAT WASHERS 25CHENOX 1/ CHENOX 5/ CHENOX 3/ CHENOX 7/ CHENOX 1/ CHENOX 5/ CHENOX 3/ CHENOX 1-8 High strength DURIUM Flat Washers are nonmagnetic and free from galvanic action when in contact with copper. Conforms to SAE standards. DURIUM SPLIT LOCKWASHERS DURIUM spring type lockwasher has high resiliency and exerts constant pressure on the face of the nut, preventing vibration from loosening the nut. Nominal Dimensions in Inches A 25FWOX 1/4 1/16 5/8 31FWOX 5/16 1/16 11/16 38FWOX 3/8 1/16 13/16 44FWOX 7/16 1/16 15/16 50FWOX 1/2 3/32 1-1/16 62FWOX 5/8 3/32 1-5/16 75FWOX 3/4 9/ /32 25SWOX 1/4 31SWOX 5/16 38SWOX 3/8 44SWOX 7/16 50SWOX 1/2 62SWOX 5/8 75SWOX 3/4 DURIUM INTERNAL TOOTH LOCKWASHERS DURIUM Internal Tooth Lockwashers are available as illustrated. The teeth are twisted slightly and present biting edges which grip the nut and the part being clamped, preventing the nut from backing off. 25NWOX 1/4 31NWOX 5/16 38NWOX 3/8 44NWOX 7/16 50NWOX 1/2 62NWOX 5/8 75NWOX 3/4
4 URNDY ALUMINUM HARDWARE OLTS URNDY aluminum hexagon head bolts are manufactured of alloy 2024-T4 and are finished with anodic coating and lubricated. s are coarse series, class 2A fit. 50X150HAOX 1/ /2 50X175HAOX 1/ /4 50X200HAOX 1/ X225HAOX 1/ /4 50X250HAOX 1/ /2 50X275HAOX 1/ /4 50X300HAOX 1/ X325HAOX 1/ /4 50X350HAOX 1/ /2 50X375HAOX 1/ /4 50X400HAOX 1/ X425HAOX 1/ /4 50X450HAOX 1/ /2 50X500HAOX 1/ X550HAOX 1/ /2 62X175HAOX 5/ /4 62X200HAOX 5/ X225HAOX 5/ /4 62X250HAOX 5/ /2 62X300HAOX 5/ X350HAOX 5/ /2 62X400HAOX 5/ X450HAOX 5/ /2 62X500HAOX 5/ X550HAOX 5/ /2 62X600HAOX 5/ NUTS URNDY aluminum nuts are manufactured of alloy 6061-T6, are finished type, coarse thread, class 2 fit. 50HANOX 1/ HANOX 5/8-11 FLAT WASHERS URNDY aluminum flat washers are manufactured of alloy 2024-T4 and are medium design. Description 50FWAOX Flat Washer 1/2 62FWAOX Flat Washer 5/8 SPLIT LOCKWASHERS URNDY aluminum split lockwashers are manufactured of alloy 7075-T6 and are regular design. Description 50SWALOX Split Washer 1/2 62SWALOX Split Washer 5/8 US: Canada:
5 URNDY GALVANIZED STEEL HARDWARE Galvanized bolts, nuts, flatwashers, and internal tooth lockwashers are manufactured per ASTM307 Grade A. Nut surfaces and bolt heads have American Standard dimensions, and the threads are per American National Coarse Series, Class #2 fit. Galvanizing is per ASTM A153. OLTS () 38X125HGSOX 3/ X275HGSOX 3/ X225HGSOX 3/ X100HGSOX 1/ X150HGSOX 1/ X200HGSOX 1/ X100HGSOX 5/ () 62X175HGSOX 5/ X125HGSOX 3/ X200HGSOX 3/ X500HGSOX 3/ X600HGSOX 3/ X200HGSOX NUTS 31CHGSNOX 5/ HGSN009OX 3/ HGSNOX 3/ HGSNOX 1/ HGSNOX 5/ HGSNOX 3/4-10 FLAT WASHERS Nominal Dimensions 38X81FWGSOX 3/ X106FWGSOX 1/ X131FWGSOX 5/ I.D. O.D INTERNAL TOOTH LOCKWASHERS olt 38NWGSOX 3/8 50NWGSOX 1/2 62NWGSOX 5/8 75NWGSOX 3/4
6 URNDY STAINLESS STEEL HARDWARE Stainless steel bolts, nuts, flatwashers and split lockwashers are manufactured from 18-8 nonmagnetic material. Nut surfaces and bolt heads have American National Coarse Series, Class #2 fit. OLTS 38X125HSSOX 3/ /4 38X225HSSOX 3/ /4 38X250HSSOX 3/ /2 38X275HSSOX 3/ /4 50X200HSSOX 1/ X250HSSOX 1/ /2 50X300HSSOX 1/ X300HSSOX 5/ X300HSSOX 3/ NUTS 25HSSNOX 1/ HSSNOX 3/ HSSNOX 1/ HSSNOX 5/ HSSNOX 3/4-10 SPLIT LOCKWASHERS 25SWSSLTOX 1/4 38SWSSMDOX 3/8 50SWSSMDOX 1/2 62SWSSMDOX 5/8 FLAT WASHERS Nominal Dimensions I.D. O.D. 25FWSOX 1/ FWSSOX 3/ FWSSOX 1/ FWSSOX 5/ US: Canada:
7 URNDY STAINLESS STEEL HARDWARE ELLEVILLE WASHERS Any bolted pad to flat electrical connection should include a bolt, two flatwashers, and the nut. In addition, if any of the flat components is aluminum, a properly designed elleville washer should be interposed between one of the flatwashers and either the bolt head or the nut, with the hollow of the elleville washer placed against the flat washer. URNDY elleville washers are designed to maintain substantial force when tightened to NEMA-recommended values and finely finished to avoid galling. D-7 Material olt Nominal Dimensions Thickness I.D. O.D. 38X75WSSOX Steel - Stainless 3/ X106WSSOX Steel - Stainless 1/
8 URNDY TYPE TMH DURIUM HARDWARE KITS D-8 Type TMH are DURIUM silicon bronze hardware kits. The kits can be ordered for specific applications ensuring the proper type and amount of hardware for each installation. Packaged in separate sealed bags, they are convenient to use, eliminating mismatched quantities. DURIUM silicon bronze material provides long lasting corrosion resistance Grade 2. TYPE TMH-SS STAINLESS STEEL HARDWARE KITS Type TMH-SS are stainless steel hardware kits. Just like the standard TMH kits, these kits can be ordered for specific applications ensuring the proper type and amount of hardware for each installation. They are packaged in separate sealed bags and convenient for use and ordering. Each TMH Kit Includes: Installation olt Flat Split Hex Working Torque Qty Washer Washer Nut Range (R) (In-lbs) TMH TMH /4-20 TMH TMH TMH TMH TMH TMH TMH270 3/ TMH TMH TMH TMH TMH TMH /2-13 TMH TMH For use with CUSA750-2TC38 copper spacer adaptor, * For other combinations contact URNDY. (2) terminals and thick equipment bus bar. For other 1 L dimension never exceeds 0.25" combinations contact URNDY. 2 For use with CUSA442TC38 on 1/4" bus bar and For use with all GAR-TC connectors. R dimension is HYLUG 4/0-750 kcmil. allowable pad thickness of terminal Each TMH Kit Includes: Installation Working olt Flat Split Hex Torque Range (R) Qty Washer Washer Nut (In-lbs) TMH322SS TMH262SS TMH263SS /4-20 TMH264SS TMH265SS TMH267SS TMH268SS TMH269SS /8-16 TMH270SS TMH271SS TMH261SS TMH295SS TMH272SS /2-13 TMH294SS TMH69SS US: Canada:
9 URNDY TYPE U DURIUM U-OLTS DURIUM U-OLTS are specifically designed for electrical connections to pipe and rod. The U-OLTS are threaded on the straight portion of the legs only allowing for more contact surface on the pipe or rod. American National Coarse s Class #2 fit. The silicon bronze is per ASTM 99. D-9 H C D U101 1/ U104 1/ U105 1/ U106 1/ U107 1/ U336 3/ U178 3/ U354 3/ U187 3/ U271 3/ U222 3/ U242 3/ U383 3/ U269 3/ U357 3/ U384 3/ U249 3/ U1031 3/ U244 3/ U199 3/ U204 3/ U124 3/ U268 3/ U257 3/ U1032 3/ U310 3/ U266 3/ U267 3/ U258 3/ U264 3/ U1033 3/ U261 3/ U422 3/ U1027 3/ U1028 3/ U1029 3/ H C D U1030 3/ U224 1/ U358 1/ U291 1/ U293 1/ U464 1/ U540 1/ U254 1/ U328 1/ U400 1/ U230 1/ U311 1/ U302 1/ U232 1/ U260 1/ U390 1/ U263 1/ U282 1/ U236 1/ U399 1/ U436 1/ U262 1/ U392 1/ U416 1/ U300 1/ U306 1/ U275 1/ U437 1/ U294 5/ U314 5/ U425 5/ U317 5/ U315 5/ U318 3/ U344 3/ U319 3/
Number Tube I.P.S. Rod Size or O.D. Range Cable H J W
TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel
Ground Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
MODEL DESCRIPTION IN LBS.
QUIC-RELEASE Oxygen Tank System Model QR-OTS- -U Parts and Mounting Information ZICO 00PM0 Rev. --7 Model QR-OTS-U allows you to mount any "M" through "J" cylinder. The system uses a QR-MV Multiversal
Ground Connectors All Copper Alloy Specification Grade
Connectors For cable connection parallel or at right angles to pipe or rod. Features A high strength corrosion-resistant copper alloy ground connector connecting a ground wire either parallel or at right
Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary
14B-2 Type M3 Hookstick Disconnect Switches Up to 38kV 0 or 900 Amp 40kA Momentary Application The Chance Type M3 Disconnect Switch is a single-phase hookstick operated switch. It is for manual switching
DIAL DAMPER REGULATOR SET (1/4 ) Product Data Sheet
DIAL DAMPER REGULATOR SET (/4 ) Elgen s Dial Damper Regulator Set is used for controlling the damper inside the ductwork. /4 regulator sets for dampers up to 0. Quick and easy installation Kit Components
AIR/VACUUM VALVE AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION
AIR/VACUUM AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION Scope. This specification is intended to cover the design, manufacture, and testing of / in. (3 mm) through 0 in. (00 mm) Air/Vacuum Valves suitable
GRADE 2 ELEVATOR BOLTS* Inch Series STEEL ZINC STAINLESS. Weight/ Boxes/ Full Case. Full Case
NO. 1 NORWAY FLAT COUNTERSUNK HEAD - 20 x 3/4 - -1/2-3/4-20 x 2-20 x 2- - 20 x 2-1/2-20 x 2-3/4-20 x 3-18 x 3/4-18 x 1-18 x 1-3/4-18 x 2-18 x 2- - 18 x 2-1/2-18 x 2-3/4-18 x 3-16 x 1-16 x 1- - 16 x 1-1/2-16
NUTS HEXAGON NUTS. GRADE 2 STEEL ZINC PLATED JN / / /c JN
HEXAGON NUTS NUTS OLT SIZE SIZE TRADE LIST PRICE PER GRADE 2 STEEL ZINC PLATED JN157 79957 4-40 7 / 64.16 100/500 4.48/c JN159 80427 6-32 1 / 8.26 100/500 2.68/c JN160 80428 8-32 5 /32.32 100/500 3.00c
ZICO 2070PM1 REV Page 1
QUIC-FLOW Dump Valves Parts and Instruction Manual ZICO 070PM REV. 9-0- Zico dump valves are uniquely designed to stop annoying leakage. A special slotted hinge over the door shifts when in the closed
MXL Timing Belt Pulleys
MXL TIMING BELT PULLEYS Quality 15 15 MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize QPMMXLA25015F03 QPMMXLA250F03 QPMMXLA2501F04 QPMMXLA25020F04 15 1 20 3 (.111) Tolerance : 3 mm
THE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
CENTER BREAK GROUP OPERATED AIR BREAK SWITCHES RATED 15.5kV THROUGH 170kV EFFECTIVE DATE: 10/25/16 REV B
CENTER BREAK GROUP OPERATED AIR BREAK SWITCHES RATED 15.5kV THROUGH 170kV EFFECTIVE DATE: 10/25/16 REV B TCV2 Hubbell has a policy of continuous product improvement. Please visit hubbellpowersystems.com
DESCRIPTION. 10" Square Valve 10" Valve for United Plastics Tank Valve Handle-Complete Assembly Auxilliary Handle Lock less Hardware (see page 12)
QUIC-FLOW MANUAL DUMP VALVE ZICO 070PM REV 3-5- QUIC-FLOW valves are the fastest dumping systems for tankers, bar none, dumping up to 800 GPM. Mounting the valve at the bottom of the tank provides approximately
XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
Section B Detector September B
Section B Detector September 200 B Index No. Part No. Description. 2-0030-000 Link 2. 2-0208-000 Deck Hook Selector Assembly 3. 2-003-000 Spacer. -3000-000 Ball Bearing. 2-00-02 X-Washer Pin. 2-008-02
Ford Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
INSTRUCTIONS Ç CAUTION. S&C Power Fuses Types SMD-1A, SMD-2B, SMD-2C, and SMD-3. For Field Assembly and Installation NOTE INSTRUCTION SHEET
S&C Power Fuses Types SMD-1A, SMD-2B, SMD-2C, and SMD-3 Outdoor Transmission Mountings Rated 34.5, 46, and 69 kv INSTRUCTIONS For Field Assembly and Installation TABLE OF CONTENTS Section Page Number INTRODUCTION........................................1
PARTS LIST CHARGER 2716 DB PLUS
PARTS LIST CHARGER 2716 DB PLUS BASE ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450 5/16-18
INSTALLATION INSTRUCTIONS WHEEL-TO- WHEEL
INSTALLATION INSTRUCTIONS WHEEL-TO- WHEEL AUTOMOTIVE PRODUCTS, INC. APPLICATION: SILVERADO/ SIERRA 2014-20 00 CREW CAB (5.5 FT BED) 2014-20 00/2500/3500 CREW CAB (6.5FT BED) & DUAL REAR WHEEL (8FT BED)
230 kv Aluminum Bolted Terminal Connectors
230 kv luminum olted YPE FV- erminal ug ee connector designed to connect aluminum cables to aluminum pad for flat bolt on connection. Pads conform to NEM standards. luminum lloy Hardware Yellow anodized
PRO 2 SERIES PSLCSE LEG CURL
PRO SERIES PSLCSE LEG CURL Page Customer Support Services PARTS MANUAL CONTENTS PAGE COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND SIDE FRAME ASSEMBLY 5 SIDE FRAME ASSEMBLY LEGEND 6 SEAT FRAME ASSEMBLY
Parts Manual. with Wiring Diagrams for domestic ovens PS870 WOW SERIES GAS FIRED: Table of Contents: Page 2.
A MIDDLEBY COMPANY PS870 WOW SERIES GAS FIRED: SPL062506-PF-BD June 25, 2006 Parts Manual with Wiring Diagrams for domestic ovens Serial # Code First 4 digits - order of production Fifth digit - model
DIRECT DRIVE CONCRETE TROWELS F30, F36, & F46 PARTS MANUAL MASTER EQUIPMENT MASTER EQUIPMENT
DIRECT DRIVE CONCRETE TROWELS F30, F36, & F46 PARTS MANUAL MASTER EQUIPMENT MASTER EQUIPMENT 850 State Hwy 55! Brooten MN 56316 www.master.equipment! GENERAL For your convenience, distributors have been
MIG Guns & Accessories
MIG Guns & Accessories MIG Guns Recommended for applications using solid and flux core wire Guns are complete with 15' cable length A complete selection of replacement parts for most brands of guns is
HVL & VL ALUM/VINYL BUNK INSTRUCTIONS (Applies to P/Ns , , , , , , , , )
HVL & VL ALUM/VINYL BUNK INSTRUCTIONS (Applies to P/Ns 3620104, 3636005, 3636030, 3650315, 3650340, 3636015, 3636035, 3680365, 3636020) REIMANN & GEORGER CORPORATION MARINE PRODUCTS BUFFALO, NY P/N 6112078
PARTS LIST CHARGER 2025 AB CHARGER 2025 DB
PARTS LIST CHARGER 2025 AB CHARGER 2025 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) - PACK OF 10
POWERS Controls. Technical Instructions Document No P25 AP December 3, No. 6 Pneumatic Damper Actuator.
POWERS Controls No. 6 Pneumatic Damper Actuator Technical Instructions AP 331-3 331-2793 Actuator 331-2857 Actuator with Clevis and Pin 331-3012 Extended Shaft and Frame Mounting Description The POWERS
18SP622 Series 50 Gillig Low Floor Diesel Particulate Filter Installation
18SP622 Series 50 Gillig Low Floor Diesel Particulate Filter Installation DESCRIPTION A replacement diesel particulate filter assembly has been released for use in Gillig Low Floor buses with Series 50
DIMENSIONS. Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F
Plunger Pumps XMA 1750 RPM E VERSION 1 1/8 WITH NEMA 182-184 FLANGE FEATURING MANIFOLD: High strength forged brass for long term use. DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid
Product Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
Clippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
PRO 2 SERIES PSSLPSE SEATED LEG PRESS. Customer Support Services PARTS MANUAL
PRO SERIES PSSLPSE SEATED LEG PRESS Customer Support Services PARTS MANUAL CONTENTS Page COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND SIDE FRAME ASSEMBLY 5 SIDE FRAME ASSEMBLY LEGEND BASE FRAME ASSEMBLY
Bridge Overhang Brackets
Bridge C49, C49D, C49S and C49JR Bridge Dayton Superior offers the bridge contractor four different Horizontal Length versions of the C49 Bridge Bracket, which allows for maximum adjustability to meet
Pipe hanger solutions
Product catalog Middle East offering Pipe hanger solutions for commercial and industrial applications B00 series B00 - Standard clevis hanger Pipe will not pinch when installing. 5 swing in either direction
Features and Benefits
CONNECTION SYSTEM BURNDY, a leading manufacturer of quality electrical connectors for over 70 years, introduces the WEJTAP SYSTEM, a system that adds further dimension to the existing BURNDY group of proven,
Connecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
PSC Terminations. Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables.
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables. Sizes are available for all shielded cables in voltage classes from 15kV through 46kV.
PARTS LIST CHARGER 2716 DB PLUS
PARTS LIST CHARGER 2716 DB PLUS BASE ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450 5/16-18
SUGGESTED TRADE LIST PRICE PER DOMESTIC STEEL ZINC JN163D ¼ -20 ¼ / /c JN165D BOLT SIZE WT. PER PKG.
HEX Domestic steel Zinc Domestic GraDe steel Zinc Domestic 18-8 stainless GraDe 2 GraDe 2 Heavy Hex GraDe GraDe 8 silicon ronze lack oxide rass 18-8 stainless 316 stainless Heavy 18-8 stainless GalvaniZeD
XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
SAE FLANGES V C. Specialists in VESCOR. Hydraulic Reservoirs and Accessories
SAE FLANGES V C VESCOR Specialists in Hydraulic Reservoirs and Accessories V C TABLE OF CONTENTS V C General Information / Split Flange Clamp............................page 1 Welding Information / Simplified
F601S, F601HS BILLY GOAT FORCE BLOWER
ACCESSORIES Patent #6,253,416 and other patents pending F601S, F601HS BILLY GOAT FORCE BLOWER Owner's Manual FRONT AIR DIRECTOR Simple to attach, allowing air to be directed forward. HOSE KIT Easily attached
Metrics
Metrics www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620) 442-7583
PRO SERIES II PSAB ABDOMINAL CRUNCH. Customer Support Services PARTS MANUAL. 1Page 1 of 9
PRO SERIES II CRUNCH Customer Support Services PARTS MANUAL 1Page 1 of 9 CRUNCH Notes: Page of 9 CRUNCH Contents PAGE COMPONENT ASSEMBLY...4 MAIN FRAME ASSEMBLY...5 SIDE FRAME ASSEMBLY...6 ADJUSTABLE SEAT
Chlorine Valves and Accessories
Chlorine Valves and Accessories Chlorine Cylinder & Ton Container Valves Standard Chlorine Institute Design & Alternate Design 1 ALTERNATE VALVE DESIGN vs. STANDARD CHLORINE INSTITUTE VALVE DESIGN FOR
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
FOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE PAGE 30
COLD ROLLED STEEL ROUND, SQUARE, FLAT, HEX AND S.S. ROUND, THREADED ROD 1018 COLD ROLLED STEEL ROUND 3 1/8 --- -- 101218 $.60 103618 $1.60 3/1 --- -- 1012316.65 1036316 1.75 1/4 --- -- 101214.95 103614
The HMC-Lite Construction Guide
The HMC-Lite Construction Guide The Heavy Metal-Lite Chassis is constructed using two identical drive modules. The drive modules are constructed using 3 mechanical sub-assemblies. The drive modules are
(W) INSTALLATION INSTRUCTIONS 90DEG BENT END SIDEBARS F-150 SUPER CREW CAB PART #DZ /DZ /DZ
(W) INSTALLATION INSTRUCTIONS PART #DZ 371691/DZ 371692/DZ 371693 PARTS LIST: Qty Description Qty Description 1 Driver/Left Sidebar 2 12mm x 45mm Double Bolt Plates 1 Sidebar 4 s 1 Driver/Left Mounting
ACM SERIES Pneumatic Actuators
ACM SERIES Pneumatic Actuators ATEX ACHEM Controls Add: North Service Road #., Oakville, Ontario Canada Phone: --34 Cell: 0--004 E-mail: Kevin.armstrong@achemgroup.com www.achemgroup.com Skype: achemkevin
Pneumatic Rack & Pinion AC-SERIES ACTUATOR
Pneumatic Rack & Pinion AC-SERIES ACTUATOR TABLE OF CONTENTS Design Features Operating Principle Parts & Materials Dimensions Torque Sheets Spring Options Measurements Sizes & How to Order 1 2 3 4 8 10
PARTS LIST CHARGER 2020 AB CHARGER 2020 DB
PARTS LIST CHARGER 2020 AB CHARGER 2020 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450
TR-1 Gold Cylinder and Bracket Mounting Instructions
TR-1 Gold Cylinder and Bracket Mounting Instructions OMC 8 HP. 2 & 4 Stroke: 1993-2002 Page 1 PN 906-1000-00 Parts: Cylinder Bracket Kit PN 120-1000-01 ITEM PART No QTY. NAME 3 330-1003-00 1 Pin, Stern
BUNTING BEARINGS LLC
BUNTING BEARINGS LLC Product Catalog Certified to ISO 9001 CAST BRONZE BEARINGS CONTINUOUS AND CENTRIFUGAL CAST BRONZE BAR AND WEARPLATE POWDERED METAL PRODUCTS CUSTOM MACHINED PRODUCTS LUBE-ALIGN MOUNTED
Kinze 3000 Series Row Unit. Hydraulic Actuator Installation Instructions PN: ENG REV. A
Kinze 3000 Series Row Unit Hydraulic Actuator PN: 2006428-ENG REV. A Installation Overview Required Parts Part Number Qty * Description 4003011 1 HYDRAULIC ACTUATOR ASSY. (INCLUDES MOUNTING HARDWARE) 4003458
OWNERS MANUAL. Model No LB. PUSH BROADCAST SPREADER. Assembly Operation Maintenance Repair Parts
OWNERS MANUAL Model No. 45-02102-101 SHIELD UP - 8 TO 18 FT. SPREAD WIDTH SHIELD DOWN - 3 TO 4 FT. SPREAD WIDTH 125 LB. PUSH BROADCAST SPREADER CAUTION: Read Rules for Safe Operation and Instructions Carefully
Specifications For Valve Insertion System
Specifications For Valve Insertion System Equipment For Valve Insertion Pipe Sizes: 4 (100mm) Through 12 (300mm) 1.0 SCOPE This specification covers the furnishing, complete EZ Valve insertion system.
DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG BUNN-O-MATIC CORPORATION
8 4 0 0 1 BUNN Espress ES 2C DISCONTINUED VERSION Parts listed in this catalog may no longer be available. 12 0,5 1,5 CL 2 16 2,5 CAUTION HOT Liquid-Steam-Surfaces OFF ON ILLUSTRATED PARTS CATALOG Designs,
Bolt Type Test Plug - Technical Specifications
EXPANSION SEAL TECHNOLOGIES DC8048 05/98 REV 2 12/04 Bolt Type Test Plug - Technical Specifications Tube ID Shaft Shaft Shaft/Port "A" LI L2 L3 Max. Op. Shaft Hex Hex Nut Approximate Range OD Quantities
TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
ADMIRAL HYDRANT. clowvalve.com
clowvalve.com ADMIRAL HYDRANT AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 350 PSI WORKING PRESSURE AVAILABLE 10-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane,
Connector Installation Guide Compression and Mechanical Connectors
Connector Installation Guide Compression and Mechanical Connectors Typical Cross Section of a Compression Connector Before Installation Before compression, a typical cross section of cable consists of
2015 Ford F Bull Bar
PARTS LIST: 2015 Ford F150 3.5 Bull Bar Qty Description Qty Description 1 3.5in Oval Bull Bar 2 10mm U-Bolt (for use on closed frames only) 1 Driver side Frame Bracket 4 10-1.50mm x 35mm Hex Bolts 1 Passenger
Installation Instructions
Installation Instructions RedRock 4x4 3 in. Bull Bar w/ Skid Plate & 20 in. Single Row LED Light Bar Black (Polished) () Part# T531165 (T531166) PARTS LIST: 1 Bull Bar 8 12mm x 32mm OD x 3mm Flat Washers
PARTS LIST: VIEWPOINT RUNNING BOARD NISSAN MURANO EXCLUDES 2dr CROSSCABRIOLET CONVERTIBLE
PARTS LIST: VIEWPOINT RUNNING BOARD Qty Description Qty Description 1 Driver/Left Running Board 14 10-1.5mm x 35mm Bolt Plates 1 Passenger/Right Running Board 6 10-1.50mm x 30mm Hex Bolt 1 Driver/Left
MEDALLION HYDRANT. clowvalve.com AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
clowvalve.com MEDALLION HYDRANT AWWA C50 UL LISTED FM APPROVED NSF 6/37 CERTIFIED 50 PSI WORKING PRESSURE 0-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane, Inc. MEDALLION HYDRANT FIRE PROTECTION
PARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
Champion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
CATALOGUE+PRICELIST ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 ACG AUTOMATION CENTER GERMANY GMBH & CO. KG
CATALOGUE+PRICELIST 2.011 ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 DESIGN AND STRUCTURE Design and structure Our newly-designed AC-A Series Pneumatic Actuator is aluminum rack & pinion actuators in
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY 129 HYDRANT YESTERDAY, TODAY, & TOMORROW For more than 85 years, the M&H
Section VIII. Parts Lists and 3-D Drawings. EAF Conveyor - Assembled View
EAF Conveyor - Assembled View 54 EAF Conveyor - Dimensional Drawing 15.4" 7.4" BW+14.2" BW+9" 12.6" 22" Leg #1 A 15" Leg #2 4" BW+4.1" BW 3.4" Discharge Belt Height 4.2" Infeed Belt Height 1.5" 55 56 EAF
PRO 2 SERIES PSBCSE BICEPS CURL
PRO SERIES PSBCSE BICEPS CURL Customer Support Services PARTS MANUAL CONTENTS Page COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND SIDE FRAME 5 SIDE FRAME ASSEMBLY LEGEND MOVEMENT ARM ASSEMBLY MOVEMENT ARM
PARTS BOOK THOROUGHBRED STANDARD SPEED FLOOR MACHINE
PARTS BOOK THOROUGHBRED STANDARD SPEED FLOOR MACHINE HANDLE ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 5090579 HANDLE ASSEMBLY - 120 VOLT - 1 H.P., 1 1/2 H.P. AND 2 H.P. 1 5092579 HANDLE ASSEMBLY - 240
PARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
Flowrite TM AP 599 Series 8-inch Pneumatic Valve Actuator
Flowrite TM AP 599 Series 8-inch Pneumatic Valve Actuator Technical Instructions Document No. 155-161P25 AP 599-1 Description Features Application The Flowrite AP 599 Series 8-inch pneumatic valve actuator
THE TRACTOR AND/OR LOADER (IF EQUIPPED)
THE TRACTOR AND/OR LOADER (IF EQUIPPED) Read the tractor and/or loader operator s manual to learn how to operate your tractor and/or loader safely. Failure to do so could result in serious injury or death
Utility Task Force Corrosion Pictures for IEEE C Fall 2018 & Submersible Transformer Galvanic Application Compatibility Chart (STGACC):
Utility Task Force Corrosion Pictures for IEEE C57.12.24 Fall 2018 & Submersible Transformer Galvanic Application Compatibility Chart (STGACC): This report contains pictures of underground submersible
Bulb Number Part Number Description BLOCK, STOP
Bulb Number Part Number Description 1 11000-384 BLOCK, STOP 2 11040-301 CLAMP BLOCK INSERT 6 12000-307 PIN, PIVOT 7 12000-337 SHAFT, PIVOT, 12.75 11 12000-345 FOOT PAD, 4.00 x 7.00 19 12000-398 SPACER
TECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE
TECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE The hardware fittings suitable for tension string to be used for 11KV consisting of following
Abrasives & Abrasive Hardware. ISO 9001:2008 Quality Management System
Abrasives & Abrasive Hardware ISO 9001:2008 Quality Management System Clesco the Abrasive Hardware Specialist This catalog reflects the major product categories & is not comprehensive in including all
INSTALLATION INSTRUCTION BULL BAR DODGE RAM 1500 PART NUMBER
INSTALLATION INSTRUCTION 09-12 DODGE RAM 1500 PART NUMBER - 200691 PARTS LIST: Qty Description Qty Description 1 Bull Bar 10 12mm Lock Washers 2 Upper Frame Mounting Brackets (for trucks without tow hooks
OHIO MODELCDS AUTO/MANUAL DROP MAGNET CONTROLLER DESCRIPTION INSTALLATION PROCEDURES INSTALLATION, MAINTENANCE, AND PARTS BULLETIN
Spec Tech Industrial 203 Vest Ave. Valley Park, MO 63088 Phone: 888 SPECTECH Email: sales@spectechind.com www.spectechind.com OHIO MODELCDS AUTO/MANUAL DROP MAGNET CONTROLLER DESCRIPTION The CDS Controller
Angle & Vertical Grinders
Angle & Vertical Grinders Lightweight aluminium housing to help reduce operator fatique. Designed to handle a variety of applications from fine deburring to heavy grinding. Equipped for Type 27 depressed
DOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
Champion Reverse Gear Harley-Davidson Six Speed Transmissions for FLH 2007 to 2008 and Softail 2007 up
Champion Reverse Gear s for FLH 2007 to 2008 and Softail 2007 up (Cable or Hydraulic Clutch) Installation Instructions Revision 11 Champion Motorcycle Accessories International, Inc. dba Champion Sidecars
230 kv Aluminum Bolted Bus Supports TYPE 16300, 16500, Ordering Information. or
230 kv luminum 230 kv luminum TYPE 16300, 16500, 16700 Cable Support The 16300, 16500 and 16700 series supports are designed for mounting stranded aluminum or CSR conductors. New cable support reduces
High-Pressure Needle Valves
www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822 Statements: NIBCO High Performance Butterfly Valves, Series 6822 and 7822, have been designed
PARTS ORDERING INFORMATION
R RP-270FSD REPAIR PARTS FOR VE270FSD Roll Grooving Tool PARTS ORDERING INFORMATION When ordering parts the following information is necessary for the Victaulic Tool Company to promptly process the order
A 1.2 kv class externally removable secondary bushing
OEM Equipment Catalog Data CA800018EN Supersedes July 2015 COOPER POWER SERIES 3010-4515 A 1.2 kv class externally removable secondary bushing General Eaton s Cooper Power series 3010-4515 A externally
1698 Midwest Blvd. Indianapolis, IN
1698 Midwest Blvd. Indianapolis, IN 46214 317.271.7100 SHOCKS Small Body Twin-Tube The 1000 series shock is a small body twin-tube that uses CNC machined aluminum internal parts designed for racing with
Technical Data. Sizes 2 in. to 24 in. (DN50 to DN600) Approvals UL and ULC Listed FM Approved
Worldwide Contacts www.tyco-fire.com Model TJP Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator General Description TYCO Model TJP Resilient-Seated Gate Valves with Vertical and
PARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
4400 TwinHybrid Gas Seal
IS0 14001: 1996 and ISO 9001: 2001 CERTIFIED CHESTERTON FLUID SEALING DIVISION INSTALLATION INSTRUCTIONS 4400 TwinHybrid Gas Seal SEAL INSTALLATION Preparation Determine if the pump is in good condition.
EZ Build Assembly and Installation
Form No. 1-1058 March 2012 EZ Build Assembly and Installation 41500 Lot Pro Diamond Edge Plow with E-72 12V Hydraulic Unit Meyer Products LLC reserves the right, under its continuing product improvement
AP SERIES ATEX NEMA 4,4X AIRPOWER PNEUMATIC ACTUATOR FEATURES
ISO 001 AP SERIES FEATURES Our newly designed D Series Pneumatic Actuator is available in double-acting and spring-return based on our innovative and patented technology. Features a top mount multi-function
Installation and Maintenance Instructions for Morin MRP Pneumatic Rack and Pinion Actuators
for Morin MRP Pneumatic Rack and Pinion Actuators Introduction The Morin MRP Pneumatic Actuator is a compact, rack & pinion design, conforming to Keystone standard or direct mount standards or EN ISO 5211
PARTS LIST GALAXY FLOOR MACHINE
PARTS LIST GALAXY FLOOR MACHINE HANDLE ASSEMBLY 120 VOLT ITEM PART NO. DESCRIPTION QTY 101 0393351 SWITCH BOX COVER 1 102 0393531 DECAL 1 103 0393441 HANDLE GRIP 2 104 0393401 SWITCH LEVER 1 105 0393521
PROCEDURE: Example of GM factory body mount bolt
IMPORTANT ALERT: GM uses a very strong thread-locking compound on all body bolts. Use of an air assisted impact ratchet can cause damage to the threads on factory body mount bolts and the internal nut