Tensioners. Stock Program Type B, eccentric, toothed running surface. Polyurethane Timing Belt Drives
|
|
- Brittany Cooper
- 5 years ago
- Views:
Transcription
1 Polyurethane Timing elt Drives Tensioners Type, eccentric, toothed running surface Type s run on ball bearings. The bearings are grease lubricated and up to C will experience no reduction in grease life. In the short term, temperatures up to 1 C are allowable. Type s are made with high-quality German bearings. Order example: Al T / - 0 Width Type / pitch Number of teeth Number of flanges Type /E0 aterials: Shaft: Steel, burnished Roller: Al
2 Pulleys and Components Type elt width dk / df *) E G Al T/-0 /E Al AT/-0 /E Al T/-0 /E Al AT/-0 /E Al T/-0 /E Al AT/-0 /E *) T-Profiles dk / AT-Profiles df Continuation Type t D SW Loadbearing parameters Cstat. Cdyn Rotational speeds n [mm -1] Al T/-0 /E Al AT/-0 /E Al T/-0 /E Al AT/-0 /E Al T/-0 /E Al AT/-0 /E
3 Polyurethane Timing elt Drives Tensioners Type, eccentric, smooth running surface Type s run on ball bearings. The bearings are grease lubricated and up to C will experience no reduction in grease life. In the short term, temperatures up to 1 C are allowable. Order example: Type /E0 / 1-0 Width Diameter D Number of flanges aterials: Shaft: Steel, burnished Roller: Alu, RoHS-conformant Flanges: Steel, zinc-plated 4 /-0 /- /-0 /- /-0 /- /-0 /- /-0 /- /-0 /- /1-0 /1- /1-0 /1- /1-0 /1- /1-0 /1- /-0 /- /-0 /- /-0 /- Type elt width D d E /E0 /E /E0 /E /E0 /E /E0 /E /E0 /E /E0 /E /E0 /E /E0 /E /E0 /E /E0 /E /E0 /E /E0 /E /E0 /E
4 Pulleys and Components Stock program Type, eccentric smooth running surface Type /E G t SW D Loadbearing parameters Cstat. Cdyn Rotational speeds n [min -1]
5 Polyurethane Timing elt Drives Tensioners Type with flange Order example: 1 / 1 - Width Diameter D Type /F0 Number of flanges aterials: Shaft: Steel, burnished Roller: Alu, RoHS-conformant Flanges: Steel, zinc-plated 6 114/-0 114/- 114/-0 114/- /1-0 /1- /1-0 /1-1/1-0 1/1- /1-0 /1- /1-0 /1-1/1-0 1/1- Type elt width D d /F0 /F /F0 /F /F0 /F /F0 /F /F0 /F /F0 /F /F0 /F /F0 /F
6 Pulleys and Components Type with flange Type /F K G t D Loadbearing parameters Cstat. Cdyn Rotational speeds n [min -1]
7 Polyurethane Timing elt Drives Tensioners Type heavy series, eccentric The Type is available in 7 standard sizes. The s feature a rigid and vibration-resistant support structure and the belt loads are resisted by the generously sized base diameter D1. The race and the support structures are made from AlCu4gSi. The s are mounted on the machine frame and the eccentric mount allows for easy adjustment of the belt pre-tension. For adjusting the mounting shaft, the pin spanner (pictured right) can be used. The s are fitted with high-quality ball bearings and pre-lubricated for life with lithium grease. They are shorttime temperature resistant up to 1 C and permanent temperatures from C and above will lead to a lower grease life than expected. The stated load ratings are based on the total where a central belt load is assumed. Socket-head screws to DIN 691 can be used for mounting to the machine frame. The screw length is dependant on proper construction in accordance with the mounting options and the associated environment. The thread sizes in the table use the recommended strength class of the screws provided. 1 groove Special sizes and s with flanges on request. groove 8 Tensioner Tensioner SR 71-0 SR 73-0 / -0 / -0 1 / -0 / / / / 1-0 Weight Dimensions [kg] earing type D D L e s d 1 groove groove
8 Pulleys and Components Type SR light series, non-eccentric SR71-0 and SR73-0 s are available in single and double row bearing versions, pre-lubricated to DIN 18-K3K. They are suitable as deflection and tension pulleys for light belt drives such as T. and T. SR 71-0 ounting instruction: counter-clockwise tensioning! SR 73-0 Pin spanner, Type 78 Loadbearing parameters Rotational speed Socket-head screw DIN 691 Size C0 dyn. C0 Stat n [min-1] Strength class Torque [Nm] Application recommendation belt width Tension roller running on back of the belt Tension roller running on back of the belt T./T T./T AT/T AT/T AT/T AT/ATP/T AT/ATP/T AT/ATP1 AT/ATP1 T./T/AT T./T/AT AT/T AT/ATP/T AT/ATP/T AT/ATP1 AT/ATP1 T T 9
Cam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationRoller chain idler sprocket units Idler pulley units
Roller chain idler sprocket units Idler pulley units Roller chain idler sprocket units, idler pulley units Page Product overview Roller chain idler sprocket units, idler pulley units... 334 Design and
More informationPulley pitch range. Pulley pitch range - Overview. Pulleys and Components. Selftracking Series. Standard Pulley ATL-Series. T-Series.
Pulley pitch range Pulley pitch range - Overview AN-Series A-Series AN 10 AN 12.7 AN 20 Selftracking SFA-Series SFA 10 SFA 15 SFA 20 A 3 A 5 A 10 A(S) 15 A 20 HD/SD-Series HD 3M*) HD 5M*) HD 8M*) HD 14M*)
More informationPOWER TRANSMISSION PARTS. Spare parts in-stock when you need them. Metric Timing Pulleys & Belt Drives.
POWER TRNSMISSION PRTS Spare parts in-stock when you need them Metric Timing Pulleys & elt Drives Metric T & T Pulley & elt Drives The metric T & T series was created to meet industries need for polyurethane
More informationCombined Bearing/Freewheel CSK CSK..2RS
Combined Bearing/Freewheel CSK CSK..2RS TYPE CSK CSK..2RS T ype CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease
More information1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
More informationCam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More information4 Assembly of Y axis
4 ssembly of Y axis List of components for Y axis 2 x Ø 8 mm x 340 mm smooth chrome rod 2 x M10 x 370 mm threaded rod 4 x M8 x 205 mm black threaded rod 1 x M3 x 16 mm - DIN-912 class 8.8 black screw 6
More informationFour Row Linear Recirculating Ball Bearing and Guideway Assembly with Gear Rack
Four Row Linear Recirculating Ball Bearing and Guideway Assembly with Gear Rack Series KUVE..SB ZHP Features NEW! Guideway with Gear Rack Four Row Linear Recirculating Ball Bearing and Guideway Assembly
More informationDynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
More informationROSTA Tensioning Motorbases Type MB. self-adjusting maintenance-free overload-proof non-slip dampen harmful vibrations extend belt drive
83 Technology ROSTA Tensioning Motorbase Type MB for Belt Drives The ROSTA elastic tensioning motorbase type MB, with the rubber suspension unit as swivel mounting, compensates continuously for all stretching,
More informationSNR, YOUR GUIDE TO LINEAR MODULES
SNR, YOUR GUIDE TO LINEAR MODULES A bearing manufacturer known across the world For almost a century NTN-SNR has been focusing on the development, design and manufacture of bearings. Today NTN-SNR has
More informationKTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
More informationROSTA Tensioning Motorbases Type MB. self-adjusting maintenance-free overload-proof non-slip dampen harmful vibrations extend belt drive
Technology ROSTA Tensioning Type MB for Belt Drives The ROSTA elastic tensioning motorbase type MB, with the rubber suspension unit as swivel mounting, compensates continuously for all stretching, hopping,
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More information1. Remove the crankshaft pulley, engine coolant pump pulley and drive belt. 2. Remove the timing belt cover.
DISASSEMBLY 1. Remove the crankshaft pulley, engine coolant pump pulley and drive belt. 2. Remove the timing belt cover. 3. Turn the crankshaft clockwise and align the timing marks so as to bring the No.
More informationContents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
More informationMAINTENANCE INSTRUCTIONS
MAINTENANCE INSTRUCTIONS ECOMAT EASY / GIROTEC WRS Version G0101 ECOMAT EASY H / GIROTEC WRS H Version G0301 ECOMAT PLUS / ECOMAT PLUS H Versions G0503 / G0603 V 2.0 Table of contents 1/3 1.0 Maintenance
More informationndustr SNR our guide to linear modules
ndustr SNR our guide to linear modules SNR A bearing manufacturer known across the world For almost a century SNR has been focusing on the development, design and manufacture of bearings. Today SNR has
More informationVulkollan & Polyamide Combined Bearings
Vulkollan & Polyamide Combined Bearings Features of Vulkollan & Polyamide Combined Bearings Silent Operation, 8 Profile/Bearing sizes Travel Speeds up to 16 Ft/sec Low Friction from 2RS seals on Ball Bearings
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel fully
More informationPowerGrip Timing Belt Drives
PowerGrip Timing Belt Drives Single Sided Belt Drive Systems PowerGrip Timing Belt drives operate on the tooth-grip principle, with the molded teeth the belt designed to make positive engagement with the
More informationTiming Belt: Service and Repair
2000 Hyundai Sonata L4-2.4L Page 1 Timing Belt: Service and Repair REMOVAL 1. Remove the crankshaft pulley, engine coolant pump pulley and drive belt. 2. Remove the timing belt cover. 2000 Hyundai Sonata
More informationLinear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
More information2003 Cadillac CTS V6-3.2L VIN N
1 of 16 5/11/2013 11:18 AM 2003 Cadillac CTS V6-3.2L VIN N Vehicle» Engine, Cooling and Exhaust» Engine» Timing Belt» Service and Repair» Timing Belt Replacement Timing Belt Replacement Tools Required
More informationSTEM Learning Environment Mechanisms Assignment #4 Belt Drives Lesson #1 Pulleys and Belts
STEM Learning Environment Mechanisms Assignment #4 Belt Drives Lesson #1 Pulleys and Belts Name: Period: Directions: Fill in the areas of this document as instructed by your teacher. This Presentation
More informationCarrier rollers product overview
F 2 Carrier rollers product overview TORWEGGE carrier rollers Page Series F 4 Technical information F 6 Coatings / Axles F 9 Steel and plastic carrier rollers F 12 Carrier and conveyor belt rollers F 17
More informationProduct Range Modules ROSTA Tensioner Devices
Product Range Modules ROSTA Page 17 14 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending
More informationGates Poly Chain GT 2 Sprocket Specifications
Gates Poly Chain GT 2 Specifications 2D and 3D Drawings are available at www.gates.com/designview 64 Gates Corporation www.gates.com/pt Stock 8mm Gates Poly Chain GT 2 Specifications of Teeth Pitch O.D.
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationJdB cassette. Version 1.03 Sun Protection AVZ 3J.1
Version 1.0 Sun Protection AVZ J.1 J.2 Sun Protection AVZ Version 1.0 4211 424-000 Alu wall bracket JdB 95 mm Mill finish 4211 424-006 Idem RAL 9010 pure white 4211 424-755 Idem (* = Textured) RAL 7016
More informationTOOTHED DRIVE BELT, REMOVING, INSTALLING AND TENSIONING
2005 Audi A4 Sedan (8E2) L4-1.8L Turbo (AMB) Vehicle > Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Service and Repair > Removal and Replacement TOOTHED DRIVE BELT, REMOVING,
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety 10-2018 GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel
More informationEngineering Data Tensioner Arms idler Sprocket Sets Idler Roller Pulley Sets
CHAIN & PULLEY TENSIONERS Engineering Data Tensioner Arms idler Sprocket Sets Idler Roller Pulley Sets ENGINEERING DATA TENSIONING TECHNOLOGY Chain & V-Belt Tensioning Roller chains are power transmission
More informationROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data
Application area Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires. Low-noise The use of polyamide drive heads results in very quiet running. Lateral loading
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More information2003 Hyundai Sonata LX
TIMING & COUNTERBALANCE SHAFT BELTS Removal CAUTION: DO NOT rotate engine counterclockwise (as viewed from timing belt end of engine). If reusing timing belt, place reference mark on timing belt to indicate
More informationMiniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
More informationLinear Bushings and Shafts
Linear Bushings and Shafts 45 b 1cr RA 83 100.1 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum Runner
More informationBRECO, BRECOFLEX timing belts. Timing belt types AT-DL BAT BATK
BRECO, BRECOFLEX timing belts Timing belt types Properties Mechanical Positive fit, synchronous run Constant length, no post-elongation Low noise Wear resistant Low-maintenance Highly flexible Positional
More informationTension Cords. HPL high performance cords: the cord cross section is increased compared with standard. This results in a lower belt
www.sitspa.com ELATECH M and V The timing elts manufactured y ELATECH have een designed to comply with every need of the design engineer in linear motion, power transmission and in conveying applications
More informationMotorized Pulley 500L, 500M & 500H, Ø 500 mm
Motorized ulley 500L, 500M & 500, Ø 500 mm To match your requirements in diameter 500 mm, our product range offers three different loading performances for your BULK applications: - L for Light-duty -
More informationROSTA Tensioner Devices
33 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending on quality, to elongation as
More informationProfi le rail guides LLR
Profi le rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More information...components in motion. Miniature Linear Guideways
...components in motion Miniature Linear Introduction Miniature linear guideway systems are widely used throughout industry for precise, compact applications. Precise and Stainless The gothic arch shape
More informationAny reproduction, even partial, is allowed only by written permission by Rollco.
LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
More informationKD Disassembly/ Assembly recommendations
KD457.48 Disassembly/ Assembly recommendations AUDI: SKODA: VOLKSWAGEN: KD457.48/UK/01-05/2016 A4 (Series 2, 2 FL, Cabriolet), A6 (Series 2, 2FL, Allroad), A8 Superb Passat ENGINES 2.5TDi TIMING BELT DIAGRAM
More informationHose Clamps and Clips High Performance Hose Clips Sockets Crimping Machine
For hose assembly of fittings different assembly methods from strong clamps to light clips or sockets can be used according to application, medium, pressure or hose material. The necessary method depends
More information3.2 lean SL 5 Technical data & dimension sheets lean SL series Technical data
3.2.1 lean SL series Technical data 3.2 lean SL 5 Technical data & dimension sheets 3.2.1 lean SL series Technical data lean SL lean SL double! Make sure that the article number refers to the correct pinion
More informationIN-VEHICLE REPAIR. Timing Drive Components Camshaft Drive Cassette, LH. Special Tool(s) Holding Tool, Camshaft Sprocket (T97T-6256)
303-01A-1 IN-VEHICLE REPAIR Timing Drive Components Camshaft Drive Cassette, LH 303-01A-1 Special Tool(s) Holding Tool, Camshaft Sprocket 303-564 (T97T-6256) Adapter for 303-564 303-578 (T97T-6256-A) Holding
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationMECHANICS. Aluminium profiles Linear guides Drive elements Linear units Rotational units
Aluminium profiles...2-2 Linear guides...2-18 Drive elements...2-44 Linear units...2-52 Rotational units...2-94 Aluminium profiles Aluminium profiles PP profiles Panel profiles PP PP 100 PP 1 PP 200 Overview
More informationGM 6-Cylinder Cam Tool Set 3.0L and 3.2L Operating Instructions
GM 6-Cylinder Cam Tool Set 3.0L and 3.2L Operating Instructions Set Includes: Locking Tool... 536594 Locking Tool... 536595 Crankshaft Holding Tool... 536596 Alignment Gauge... 536608 Belt Installation
More informationSection VIII. Parts Lists and 3-D Drawings. EAF Conveyor - Assembled View
EAF Conveyor - Assembled View 54 EAF Conveyor - Dimensional Drawing 15.4" 7.4" BW+14.2" BW+9" 12.6" 22" Leg #1 A 15" Leg #2 4" BW+4.1" BW 3.4" Discharge Belt Height 4.2" Infeed Belt Height 1.5" 55 56 EAF
More informationGear Products Inc N. 161st E. Ave. Tulsa, OK Phone (918) Fax (918)
SERVICE MANUAL Disassembly & Assembly Procedures Worm Gear Swing Drive 003 Series Gear Products Inc. 1111 N. 161st E. Ave. Tulsa, OK 74116 Phone (918) 234-3044 Fax (918) 234-3455 Worm Gear Swing Drive
More informationREMOVAL & INSTALLATION
REMOVAL & INSTALLATION CAUTION: This application is an interference engine. Do not rotate camshaft or crankshaft when timing belt is removed, or engine damage may occur. TIMING & COUNTERBALANCE SHAFT BELTS
More informationRemoving and installing toothed belt
Page 1 of 10 Special tools and workshop equipment required Diesel injection pump locking pin -3359- (2x) Pin wrench -T10020- Crankshaft stop -T10050- for engines with circular crankshaft sprocket Locking
More informationLinear Actuator with Toothed Belt and Integrated Guide with Roller Guide with Recirculating Ball Bearing Guide. Series OSP-E..BHD
inear ctuator with Toothed elt and Integrated Guide with Roller Guide with Recirculating all earing Guide Series OSP-E..HD Contents Description Page Overview 11-14 Version with Roller Guide Technical Data
More informationTiming Belt Installation
Timing Belt Installation The following is an installation guideline designed to combat problems resulting from improper installation of timing belt drives. 1) Loosen Motor. Check to make sure that the
More informationEngine, disassembly and
Page 1 of 13 13-1 Engine, disassembly and assembly Ribbed belt, removing and installing Removing - Remove noise insulation -arrows-. - Remove bumper Repair Manual, Body Exterior, Repair Group 63 - Move
More informationR310EN 2211 ( ) The Drive & Control Company
eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball
More informationLinear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
More informationTiming Belt: Service and Repair Timing Belt Replacement
2000 Cadillac Catera V6-3.0L VIN R Copyright 2006, ALLDATA 8.80 Page 1 Timing Belt: Service and Repair Timing Belt Replacement TIMING BELT REPLACEMENT Removal Procedure ^ Tools Required - J 42069 Timing
More informationTiming Belts
Timing Belts www.medway-uk.com 1 Timing Belts Imperial Product Description The MEDWAY classical timing belt (synchronous) has a trapezoidal tooth profile providing a positive drive by the meshing of belt
More informationREINFORCED POLYURETHANE ARC-POWER TIMING BELTS
B217 REINFORCED POLYURETHANE ARC-POWER TIMING BELTS The revolutionary arc shaped state-of-the-art timing belt design represents the most unique and efficient timing belt available. This world-wide patented
More informationMAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts
More informationELATECH flat belts. Pulleys. Belt storage. TP (Total Protection) Belts. Belt installation. Belt life. Belt fastening guidelines F1 F2 F2,5 F3
ELATECH flat belts Pulleys Belt storage Belt installation TP (Total Protection) Belts Belt life Belt fastening guidelines F1 F2 F2,5 F3 a b p s d Bolt R (Radius) F1 F2 F2,5 F3 D F1 1 ELATECH M and V Type
More informationCompact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationGeneral Purpose Cast Iron Motors
General Purpose Cast Iron Motors Totally enclosed squirrel cage three phase low voltage motors, Sizes 71-355, 0.25 to 250 kw www.abb.com/motors&drives > Motors > Low voltage motors > General purpose motors
More informationEFFICIENCY PERFECTED. DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5. Feed force [N] Feed speed [m/s]
EFFICIENCY PERFECTED DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5 2000 TEETH RATIO i = 5 Feed force [N] 0000 8000 6000 4000 DE-DG5 m4 DE-DG5 m DE-DG90 m DE-DG90 m2 DE-DG75
More informationX 3mm Flat Head Screw. Adjustment Hole x15x4mm Ball bearing. M2x10mm Hex Screw. Spring. Clutch Shoe. Ball.
INSTRUCTIONS #35017 NITRO OB-4 1/10 SCALE 2-SPEED TRANSMISSION SET (Shoe Type) * This professional two speed transmission is only for Nitro OB-4 1/10 Scale OB4 Gas Car Kits. Nitro Ob4 ASSEMBLY OF THE TWO
More informationWheels and castors with pneumatic tyres
Wheels and castors with pneumatic tyres 190 we innovate mobility www.blickle.com Table of Contents P L LS Series Load capacity Page P 180-490 mm 50-525 kg 192/193 194 L-P 200-20 mm 75-250 kg LS-P 400-415
More informationTS 3 Conveyor Modules
BOSCH Modular Transfer Systems TS Conveyor Modules Spare Parts Listing Publication Number: 898006 7/98 8 PALLET TRAVEL 7 9 RIGHT 4 LEFT 6 0 2,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, DANGER BOSCH 7 2 BOSCH 4 6 Automation
More informationTELESCOPIC-LINE. Semi-telescopic-rail LST. Telescopic-rail LSE. Linear guides with ball-cage LSS
TELESCOPIC-LINE Semi-telescopic-rail LST Telescopic-rail LSE Linear guides with ball-cage LSS 1 Ball rails LSS, LST and LSE The ball rails produced by Nadella are very compact and flexible products. Made
More informationProtection And Separating Wall Systems
1 The protection and separating wall sys tem comprises of a number of different profile families. Standard Profiles ( mm thru 8 mm) From the extensive range of Silverline profiles, most static requirements
More informationMaryland Metrics: How to order: Please prefix the P.T.I. part number or description with R305- example: R305-RAK201-8A Table of Contents.
Table of Contents Product.... Inside Cover General Overview.....2 Mounted Ball Bearings - Metric / Inch Ball Bearing Selection & Interchange......8 Pillow Blocks......14 Tapped Base......36 4-Bolt Flange
More informationHepcoMotion MHD Heavy Duty Track Roller Guidance System
Motion Without Limits HepcoMotion MHD Heavy Duty Track Roller Guidance System product overview The HepcoMotion MHD system provides an accurate, durable and low friction linear guide which is particularly
More information2005 Hyundai Tucson LX. On some models, engine is equipped with a timing belt and timing chain. Inspect timing chain when replacing timing belt.
TIMING BELT NOTE: On some models, engine is equipped with a timing belt and timing chain. Inspect timing chain when replacing timing belt. Removal 1. Remove the engine cover. See Fig. 1. 2. Remove right
More informationChapter 11 Rolling Contact Bearings
Chapter 11 Rolling Contact Bearings 1 2 Chapter Outline Bearing Types Bearing Life Bearing Load Life at Rated Reliability Bearing Survival: Reliability versus Life Relating Load, Life, and Reliability
More informationKICK STARTER/DRIVE PULLEY/ CLUTCH/DRIVEN PULLEY SERVICE INFORMATION TROUBLESHOOTING KICK STARTER DRIVE BELT...
8 KICK STARTER/DRIVE PULLEY/ 8 SERVICE INFORMATION... 8-2 TROUBLESHOOTING... 8-2 KICK STARTER... 8-3 DRIVE BELT... 8-7 DRIVE PULLEY... 8-9 STARTER ONE-WAY CLUTCH DRIVE GEAR... 8-11... 8-14 8-0 Torque:
More informationROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free
MOTORBASES Self-Tensioning Motor Mount for Belt Drives without slippage self-adjusting maintenance-free Technology Tensioning Motorbase Type MB for Belt Drives The elastic tensioning motorbase type MB,
More informationMAINTENANCE DEVICES CATALOGUE DC000048EN/22
MAINTENANCE DEVICES CATALOGUE DC000048EN/22 TOOL BOX IN THE STATION MOUNTING LOCATIONS IN THE STAION TOOL BOX FOR MAINTENANCE TOOLS IN THE STATION 41080402 22/03/2018 2 GRIP SLIP TESTING DEVICE ANTICLOCKWISE
More informationRemoval. All vehicles. Published: 11-Mar-2014 Engine - TDV6 2.7L Diesel - Timing Belt In-vehicle Repair. Special Tool(s) Check Pin - Camshaft Pulleys
Published: 11-Mar-2014 Engine - TDV6 2.7L Diesel - Timing Belt In-vehicle Repair Special Tool(s) Check Pin - Camshaft Pulleys 303-1132 Timing Pin - Camshaft Pulleys 303-1126 Timing Pin - Automatic Transmission
More informationMANUAL GEAR HOUSING (4WD)
SR26 STEERING MANUAL GEAR HOUSING (4WD) REMOVAL AND INSTALLATION OF MANUAL GEAR HOUSING Remove and install the parts as shown. (MAIN POINTS OF REMOVAL AND INSTALLATION) 1. DISCONNECT UNIVERSAL JOINT (a)
More informationToothed belt, removing and installing
Toothed belt, removing and installing Special Tools and Equipment ^ 3212 spanner wrench ^ 3387 pin wrench ^ T40011 pin ^ T40026 locking pin ^ T40028 socket ^ T40030 camshaft adjuster gauge Removing Lock
More informationELECTRIC WIRE ROPE HOIST and TROLLEY RHN SERIES
EFFECTIVE: October 21, 2011 ELECTRIC WIRE ROPE HOIST and TROLLEY RHN SERIES 2 Ton through 20 Ton Capacity Hoist Code and Serial Number This equipment should not be installed, operated or maintained by
More informationCONVEYOR COMPONENTS ELECTRIC ENGINES WORM GEARS ELECTRIC ENGINES MADE OF STAIN- LESS STEEL OR ACID-PROOF STEEL
ONVEYOR OMPONENTS WORM GERS ELETRI ENGINES WORM GERS MDE OF STINLESS STEEL OR ID-PROOF STEEL ELETRI ENGINES MDE OF STIN- LESS STEEL OR ID-PROOF STEEL TRNORT ROLLERS version 1.1 Worm gears MNRV SERIES b
More informationTT8101 Rotary Tedder
TT0 Rotary Tedder Illustrated Parts Breakdown Page Front End Page Page Transport Axle Assembly Cylinder Linkage Page Guards Page Page Page Page Transport Lock Assembly Lift Frame Assembly Center Tunnel
More informationSmall transport belts single-lane, double-lane
Small transport belt, single-lane Small transport belt, double-lane Specifications may change as design revisions take place; closing date: 32/2013 All rights reserved The copyright owner of this documentation
More informationComponents for parallel kinematics
Components for parallel kinematics Series GLK, GLAE Joints and struts form the core components of machines with parallel kinematics (PKM). Irrespective of the control technology possibilities, good mechanical
More informationGatesFacts Technical Information Library Gates Compass Power Transmission CD-ROM version 1.2 The Gates Rubber Company Denver, Colorado USA
Timing Belt Selection And Troubleshooting David E. Roos Maintenance Technology September 1989 Evenly spaced teeth on the bottom surface of synchronous or timing belts mesh with grooves on the pulleys for
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationBallscrews / Linear Guideway General Catalog
Ballscrews / inear Guideway General Catalog inear Guideway 2 Introduction of ach Series 2. eavy oad Type, MSA Series A. Construction Upper Retainer Carriage nd Seal nd Cap Rail Grease Nipple Ball 45 ower
More informationCATALOG
www.craft-bearings.com CATALOG The contents of this catalog are subjected to change without prior notice. Every possible effort has been made to ensure that the data here in is correct; however, CRAFT
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationHR930 Rotary Rake. Illustrated Parts Breakdown. Tongue & Main Frame. Gearbox & Tine Arm
HR0 Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Tongue & Main Frame Guards Gearbox & Tine Arm Axle Assembly Rotary Gearbox PTO Shaft 0//0 Tongue & Main Frame 0 0 0 0 Ref# Description
More informationTT6101 Rotary Tedder
TT0 Rotary Tedder 0/0/0 Illustrated Parts Breakdown Page Chassis Assembly Page Page Transport Axle Assembly S/N - Transport Axle Assembly S/N + Page Page Page Page Page Transport Lock Assembly Lift Frame
More informationTRANSMISSIONS. Mechanical Power Transmission
TRANSMISSIONS Mechanical Power Transmission Dunlop BTL Ltd European Distribution Centre MPT House Brunswick Road Cobbs Wood Industrial Estate Ashford, Kent. UK TN23 1EL Contact us +44 (0)1233 663340 +44
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More information