SCHMIDT Toggle Presses
|
|
- Branden Alexander
- 6 years ago
- Views:
Transcription
1 SCHMIDT Toggle Presses The high force at the end of stroke, just where it is important Do you need a high force at the end of stroke for materialtransforming processes? Then, SCHMIDT Toggle Presses are just the right choice. Features High force at the end of stroke (see diagra below) Honed bores and ground rams provide a long service life and a precise guidance 3RFZ / 4-7R Stroke before plug-in position of the toggle () 4,5 5, = No. 3 Force at the hand lever N = No. 3 Force at the hand lever N Stroke before plug-in position of the toggle () 4 3 = No. 7 Force at the hand lever N = No. 7 Force at the hand lever N 3 = No., 4, 5, 6 Force at the hand lever N 4 = No., 4, 5, 6 Force at the hand lever N Maximum force will be reached just before extended position 8 SCHMIDT Presses
2 From 5 kn to 5 kn 3 3R R 5 5R 4 4R 6 6R 7 3F 3RF F RF 5F 5RF 4F 4RF 6F 6RF 7F Press head type 3-4 3R R - 45 R - 45 R R R - 6-3F RF - 35 F - 35 RF - 35 F - 35 RF - 35 F - 5 RF - 5 F - 5 RF - 5 F - Nominal force kn Working stroke A Throat depth C Press head height S Ram bore Ø H7 H7 H7 H7 H7 H7 H7 H7 H7 H7 H7 Hand lever left Angle of rotation Max. weight. / 3.5. / 3.5 / 4.5 / 4 / 4.5 / 4.5 /.5.5 /.5.5 /.5.5 /.5.5 /- kg upper tool 3).5 / 3.5 / 3.5 / 6 / 6.5 / 6 / 6 / 5.5 / 4 / 5.5 / 4.5 /- Return stroke lock ) Locked position bef. DC Locked position bef. DC Disengaging accuracy Working height 4) F Frame No. 3 Frame No. 3 Frame No. Frame No Frame No Weight approx. kg Accessories Mechanical counter Throat depth frame (total depth), 3 Additional fixture mounting plate suitable for throat depth frame 3 3F 3R 3RF F R RF Block clamping piece ) Frame Overview Frame Height M without height adj. () 5 5F Table Size B x T () 5R 5RF 4 4F Table Bore D (Ø ) 4R 4RF 6 6F Table Height K () 6R 6RF 7 7F Mounting Surface B x L () No x 8 H7 46 x 85 No. 3, 4, x H7 6 5 x 6 No. 5, x H x 8 No. -6, 4, 5, 6, x 6 H7 98 x 9 No. -, 4, 5, 6, 7 4 x 6 H7 98 x 9 Options Series with no additional charge Additional charge applies ) Adjustment of locking position on request ) Stroke reduction about by version with additional charge 3) The weight was determined with hand lever position 45 forward (guidelines) 4) Typical values; can vary ± 3 due to cast and production tolerances Other available Options Nickel plated Cast parts are electroless nickel plated, steel components black oxide finished, aluminum anodized, precision steel surfaces are untreated Custom Paint Press and column can be painted to customer s color specification Bores for Adapting Tooling Customer specific sizes can be supplied M L C B x T Ø D A B S F K ±. H9 M 8 Ø H7 No. 3, 3: Ø 5 No., 4-7: Ø 3 Please consult our Sales Department or Representative. Detailed dimensional drawings can be downloaded: Simply the best! 9
3 SCHMIDT Toggle Presses with Horizontal Pull The high force at the end of stroke, just where it is important Do you need a high force at the end of stroke for material-transforming processes? Then, SCHMIDT Toggle Presses are just the right choice. Features High force at end of the stroke (see diagra below) Honed bores and ground rams provide a long service life and a precise guidance Ergonomic Press with horizontal pull With press No. 3 and No. the manual force is applied by pulling the lever towards the body. This press is especially suitable for rapid production at small forces. We supply press No. including the ergonomic handle (standard scope of supply). 3RFZ RF Stroke before plug-in position of the toggle () 4,5 5, = No. 3 Force at the hand lever N = No. 3 Force at the hand lever 5 N Stroke before plug-in position of the toggle () = No. Force at the hand lever N = No. Force at the hand lever N Maximum force will be reached just before extended position SCHMIDT Presses
4 From.5 kn to kn Press head type 3 3F 3 3F 3R 3RF 3R 3RF F - 45 F - 5 Nominal force kn.5.5 Working stroke A Throat depth C Press head height S R RF R - 45 RF - 5 Ram bore Ø H7 H7 H7 H7 Hand lever left Angle of rotation Max. weight / 3.5 /.5.5 /-.5 /- kg upper tool 3).6 / 3.6 / 3 3 / - 3 / - Return stroke lock ) Locked position bef. BDC 4 Locked position bef. BDC.5.5 Disengaging accuracy.3.7 Working height 4) F Frame No. 3 Frame No. 3 Frame No. Frame No. -6 Frame No Weight approx. kg 8 8 Accessories Mechanical counter Throat depth frame (total depth), 3 Additional fixture mounting plate suitable for throat depth frame 3 3F Block clamping piece ) 3R 3RF F R RF Frame Overview Frame Height M () Table Size B x T () Table Bore D (Ø ) Table Height K () Mounting Surface B x L () No x 8 H7 46 x 85 No x H7 6 5 x 6 No x H x 8 No x 6 H7 98 x 9 No. - 4 x 6 H7 98 x 9 Options Series with no additional charge Additional charge applies ) Adjustment of locking position on request ) Stroke reduction about by version with additional charge 3) The weight was determined with hand lever position 45 back (guidelines) 4) Typical values; can vary ± 3 due to cast and production tolerances Other available Options Nickel plated Cast parts are electroless nickel plated, steel components black oxide finished, aluminum anodized, precision steel surfaces are untreated Custom Paint Press and column can be painted to customer s color specification Bores for Adapting Tooling Customer specific sizes L B M C B x T Ø D K F S 3 Ø H7 No. 3: Ø 5 No. : Ø 3 Please consult our Sales Department or Representative. Detailed dimensional drawings can be downloaded: ±. M 8 H9 7 + Simply the best!
5 SCHMIDT Toggle Presses with Square Ram Optimum guidance and anti-rotation Do you need a high force at the end of stroke for materialtransforming processes? Then, SCHMIDT Toggle Presses are just the right choice. Features High force at the end of stroke Square ram is anti-rotational (no die sets required) Fully adjustable, play-free teflon-lined gibs VRFZ 3 VRFZ 4 VRFZ 5 VF 6 VF 9 VF Stroke before plug-in position of the toggle () = No., 4, 5, 6 Force at the hand lever N = No., 4, 5, 6 Force at the hand lever N No. 3 see on page 8 Stroke before plug-in position of the toggle () = No. 9 Force at the hand lever N = No. 9 Force at the hand lever N Maximum force will be reached just before extended position SCHMIDT Presses
6 From 5 kn to kn Press head type 3 V 3 VF 3V-4 3VF-4 3 VR 3 VRF 3VR-4 3VRF-4 V VF V-45 VF-45 5 V 5 VF V-45 VF-45 VR VRF 5 VR 5 VRF VR-45 VR-45 VRF-45 VF-45 4 V 4 VF V-6 VF-6 6 V 6 VF V-6 VF-6 4 VR 4 VRF 6 VR 6 VRF 9 V 9 VF 9 VR 9 VRF VR-6 VR-6 9V-4 ) 9VR-4 ) VRF-6 VRF-6 Nominal force kn Working stroke A Throat depth C Press head height S Ram bore Ø H7 H7 H7 H7 H7 H7 H7 H7 H7 H7 H7 H7 Hand lever left Angle of rotation Max. weight top tool 3) kg. / 4. / 4.6 / 4..6 / 4..6 / 4..6 / 4. / 3.5 / 3.5 / 3.5 / 3.5 / - / - / 3.5 / 3.5 / 5 / 5 / 5 / 5 / 3.5 / 3.5 / 3.5 / 3.5 / - / - Return stroke lock ) Locked position bef. BDC Locked position bef. BDC Disengaging accuracy Working height 4) F Frame No Frame No Frame No Frame No Frame No Frame No Frame No Frame No Weight approx. kg Accessories Mechanical counter Throat depth frame, 3 Throat depth frame 5 Additional fixture mounting plate suitable for throat depth frame 3 V 3 VF 3 VR 3 VRF V VF 5 V 5 VF VR VRF 5 VR 5 VRF 4 V 4 VF 6 V 6 VF 4 VR 4 VRF 6 VR 6 VRF 9 V 9 VF 9 VR 9 VRF Frame Overview Frame Height M () Table Size B x T () Table Bore D (Ø ) Table Height K () Mounting Surface B x L () No x 8 H7 46 x 85 No. 3, x H7 6 5 x 6 No. 5, x H x 8 No. -6 5, x 6 H7 98 x 9 No. - 5, 6 4 x 6 H7 98 x 9 No x 6 5H7 x 37 No x 4H x 46 No x 4H x 48 Options Series with no additional charge Additional charge applies ) Special strokes and 5 on request ) Adjustment of locking position on request 3 The weight was determined with hand lever position 45 forward (guidelines) 4) Typical values; can vary ± 3 due to casting and production tolerances S B Other available options A C Nickel plated Cast parts are electroless nickel plated, steel components B x T H9 black oxide finished, aluminum anodized, precision steel surfaces are untreated Custom Paint Press and column can be painted to customer s color 7 + specification Ø D Bores for Adapting Tooling Customer specific sizes Please consult our Sales Department or Representative. Detailed dimensional drawings can be downloaded: M F K ±. L Simply the best! 3
SCHMIDT ManualPress. From 1.6 kn to 22 kn
SCHMIDT ManualPress From 1.6 kn to 22 kn Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual presses are often the
More informationSCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs.
SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs. Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual
More informationSCHMIDT PneumaticPress
Maximum pressing force from 1.6 kn to 60 kn The SCHMIDT PneumaticPress range consists of a modular system suitable for transforming, joining and assembling operations optimally within the pressing capacities
More informationSCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 to 60 kn The SCHMIDT PneumaticPress range consists of a modular system suitable for transforming, joining and assembling operations optimally within the pressing capacities
More informationSCHMIDT Presses. Simply the best! Presses, Control Units, Safety & more. Complete solutions from a single source
SCHMIDT Presses Simply the best! Presses, Control Units, Safety & more Complete solutions from a single source Table of Contents Introduction Page 2 ManualPress Page 5 Rack-and-Pinion Presses Page 6 Toggle
More informationSCHMIDT Presses. Simply the best! Presses, Control Units, Safety & more. Complete Solutions from a single Source
SCHMIDT Presses Simply the best! Presses, Control Units, Safety & more Complete Solutions from a single Source Table of Contents Introduction Page 2 ManualPress Page 5 Rack-and-Pinion Presses Page 6 Toggle
More informationSCHMIDT HydroPneumaticPress
SCHMIDT HydroPneumaticPress C-rame design eatures The C-rame design offers full accessibility when manually inserting and removing parts Easy adaptation to different tool and part heights because of simplistic
More informationSCHMIDT PneumaticPress
Direct Acting Pneumatic Presses with Force / Stroke Monitoring PneumaticPresses with force / stroke monitoring are offered as complete system with control unit Press- Control 600. These systems are characterized
More informationSCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 to 60 kn The SCHMIDT PneumaticPress range consists of a modular system suitable for transforming, joining and assembling operations optimally within the pressing capacities
More informationSCHMIDT PneumaticPress Direct Acting pneumatic presses with force/stroke monitoring
Direct Acting pneumatic presses with force/stroke monitoring 32 323 327 329 SCHMIDT PneumaticPress with force/stroke monitoring are offered as complete system with control unit SCHMIDT PressControl 3.
More informationSCHMIDT Presses. Simply The Best! Presses, Control Units, Safety & More. Complete Solutions from a Single Source
SCHMIDT Presses SCHMIDT Technology GmbH Feldbergstr. 1 78112 St. Georgen, Germany Phone +49 (7724) 899 0 Fax +49 (7724) 899 101 info@schmidttechnology.de www.schmidttechnology.de SCHMIDT Technology GmbH
More informationSCHMIDT ManualPress 300 Series
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO-compatible documentation of the results are becoming the major factors for small and
More informationSCHMIDT PneumaticPress
PneumaticPress Direct Acting Pneumatic Presses with Force / Stroke Monitoring PneumaticPresses with force / stroke monitoring are offered as complete system with control unit Press- Control 600. These
More informationMaximum force range from 15 kn to 220 kn
SCHMIDT HydroPneumaticPress Maximum force range from 1 kn to 220 kn The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for transforming, joining and assembling optimally within
More informationSCHMIDT ManualPress 300 Series Manual Presses with Process Monitoring
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO-compatible documentation of the results are becoming the major factors for small and
More informationSCHMIDT HydroPneumaticPress
Maximum orce Range from 1 kn to 220 kn The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for transforming, joining and assembling optimally within the pressing force range 1 220
More informationPneumatic toggle presses
The accessories Pneumatic toggle presses P*L and VL range The optimum transmission ratio of the toggle lever produces large forces at the end of the stroke and ensures low air consumption. The resulting
More informationSCHMIDT ServoPress. Unmatched Precision and Flexibility
SCHMIDT ServoPress Unmatched Precision and Flexibility An economic and high quality assembly is the key to the success of your product. The aim is to join together precise assemblies from low-cost individual
More informationSCHMIDT HydroPneumaticPress
SCHMIDT HydroPneumaticPress Control Versions with Force-Stroke-Monitoring Single-channel Control Integration of the press in an automatic installation Electrical Power Stroke Connection incl. force output
More informationC N C. S y n c h r o. H y d r a u l i c
C N C S y n c h r o H y d r a u l i c P r e s s B r a k e E n g i n e e r e d t o p e r f e c t i o n... CNC Press Brake CNC Controller 5 CNC Controller 7" Full Colour TFT Touch Screen Display - Selection
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationHP HV HP HV HP HV XL-HP HV XL-HP HV XL-HP HV
Hydropneumatic presses HP range XL-HP range with 300 mm throat Hydropneumatic presses HP 5000 HV Type HP 3.000 HV HP 5.000 HV HP 10.000 HV XL-HP 3.000 HV XL-HP 5.000 HV XL-HP 10.000 HV Capacity at 6 bar
More information.com More than a machine. Power your life
Mechanical Clamp, Precise working Solid Radial Drilling Machines ideal for Versatile use in the Single Part and Series Production This kind of MM-R40V is the Mechanical Clamp 40mm Solid Radial Drilling
More information/2017. Hollow piston cylinder, single-acting spring clamping hydraulic unclamping
, single-acting spring clamping hydraulic unclamping Applications: un-pressurized long-term clamping of dies or fixtures on press beds and rams when the space available is limited T-bolt Spring clamping
More information/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting
roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state
More informationWood/wide aluminum hardware set
AVENTOS HK Wood/wide aluminum hardware set Lift mechanism set Lift mechanism (qty 2) #7 x mm (-/8 ) wood screw (qty 0) Power factor Opening angle 4 99 07 20K200.N 00 74 07 20K200.N 7 49 07 20K2700.N 0
More informationHydraulic clamping elements
Hydraulic clamping elements hydraulic 3 Contents Product group 3 Hollow piston cylinder single-acting 3.1403 3.2130 Sliding clamp single-acting compact classic 3.2202 3.2204 Angular clamping element single
More informationPB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding Ex GST Inc GST $29,400.00 $32,340.00 $27,950.00 $30,745.00 Special
More informationPB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding On Sale Ex GST Inc GST $39,500.00 $45,425.00 $38,500.00 $44,275.00
More informationRam plate area F mm 315 x x x x x x x 315. Maximum daylight B mm
DAP Portal Press DAP Portal Press DAP Portal Press Type DAP 450-80 DAP 850-80 DAP 1300-80 DAP 1700-80 DAP 2100-80 DAP 2800-80 DAP 3400-80 Capacity kn 4.5 8.5 13 17 21 28 34 Return force kn 4 4 4 4 20 27
More informationMagSpring. Courtesy of Steven Engineering, Inc. - (800)
468 www.linmot.com M01-20 472 M01-37 474 Accessories 476 www..com 469 products can best be described as "magnetic springs." The term "spring", however, is to be understood to mean that components generate
More informationMechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses
Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment ST 1092 ST 1292 page 7.03 ST 9041 page 7.04 ST 9062 page 7.05 ST 9067 page 7.05 ST 9072 page 7.06 ST 9075 page
More informationPB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge
PB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge Ex GST Inc GST $40,950.00 $45,045.00 ORDER CODE: S909 MODEL: Control Unit (Type): PB-170B Estun
More informationCMT ELECTRO-HYDRAULIC SYNCHRONIZED CNC PRESSBRAKE PBH SERIES
PBH SERIES PBH Series Electro-hydraulic Synchronized CNC Pressbrake Streamlined design, high speed, high precision, high rigidity CNC sheet metal pressbrake Electro hydraulic servo system, full loop controlling
More informationZwick. Materials testing. Product Information LTM 5/10 electro-dynamic testing machine
CTA: 113389 113384 testing machine Range of application The LTM is an electro-dynamic testing machine with a drive based on linear motor technology. 's new, patented drive concept enables the LTM to be
More informationPNEUMATIC TOGGLE PRESSES
ELECTROPNEUMATICS -an innovative engineering organisation was established in 1972 and began their operations with the manufacture of a comprehensive range of pneumatic control valves, which were soon widely
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationI;! Anchor Lamina. l;! Lamina Components. Ball-Bearing Products. Check our website for the latest technical information.
I;! Anchor Lamina l;! Lamina Components Ball-Bearing Products www.anchorlamina.com Check our website for the latest technical information. Ball-Bearing Components CONTENTS Ball-Bearing Operating Data &
More information> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar
Vertical and link CLAMPS for DEMANDING TASKS vertical CLAMP > piston force up to 20,1 kn > operating pressure 250/350 bar > chemically nitrided body link CLAMP > piston force up to 44,0 kn > operating
More informationClass 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
More informationSeries MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder.
Compact Guide Cylinder: Series S ø, Compact Guide Cylinder Compact guide cylinder Heavy duty guide rod type S Z73 mm mm How to Order Number of auto switches Nil S 2 pcs. 1 pc. Auto switch type Nil Without
More informationPower Features. Integrated Welder For Ultrasonic Plastics Assembly. more. Models XPT and XPE. for more information:
more Power Features new FEATURES Digital Time and/or Constant Energy Weld Modes Available Single-piece Rigid Cast Aluminum Machine Base and Column Hub Digital Amplitude Control Ultrasonic Horn/Stack Frequency
More informationFigure RP ACTUATORS PNEUMATIC RACK & PINION.
Figure RP ACTUATORS PNEUMATIC RACK & PINION www.fnw.com TORQUE RANGES The RP rack and pinion actuators are available with output torques ranging from 44 to 36,269 in-lbs depending on air supply pressure
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationMILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models
Since 1977 MILLING MACHINES A wide range of models to select from light to heavy duty models SHIAN RONG JING JI CO., LTD. No. 95, Ln. 61, Dafu Rd., Shengang Dist.,Taichung City 429, Taiwan. TEL: 886-4-2523
More informationSome customers opt to manually power their actuators. In those cases hand wheels are usually the preferred drive component.
EXTERNAL POWER SOURCE AND GEAR REDUCER All actuators require an external power source. Whether this power source be an electric motor or hand wheel Duff-Norton has the required component. Customers who
More informationBall-Bearing Products
Ball-Bearing Products www.daytonlamina.com Check our website for the latest technical information. Ball-Bearing Components Contents Ball-Bearing Operating Data & Design Selection... 2 Ball-Bearing Component
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationI&M UT Series (2003 Design)
I&M UT Series (2003 Design) 3170 Wasson Road Cincinnati, OH 45209 USA Phone 513-533-7340 ax 513-533-7343 E-Mail: marwin@richardsind.com www.marwinvalve.com Installation & Maintenance Instructions for Marwin
More information/2017. Swing sink clamping element double-acting
Applications: integrated in press rams integrated in press beds in machine tools and equipment when the available space is limited when temperatures may reach 70 C For power units please see product group
More informationBERCO S.p.A. Via 1 Maggio, Copparo (FE) Italy Tel Fax
ISO 9001 Cert. n. 0029/4 ISO 14001 Cert. n. 0009A/0 All manufacturers s names, numbers, symbols and descriptions are used for reference purposes only. All parts listed are of Berco original production.the
More informationMT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
More informationUT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series. A full range of double acting and spring return actuators designed
UT-**-DA Series UT-**-SR Series A full range of double acting and spring return actuators designed to NAMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual
More informationCam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationPull Action Latch Clamps
6.1 Pull Action Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
More informationYour Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
More informationMXL Timing Belt Pulleys
MXL TIMING BELT PULLEYS Quality 15 15 MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize QPMMXLA25015F03 QPMMXLA250F03 QPMMXLA2501F04 QPMMXLA25020F04 15 1 20 3 (.111) Tolerance : 3 mm
More informationG1/8-3/2-Way Valves - Series K9
PDE600PNUK 3/-Way Valves - Series K9 G1/8-3/-Way Valves - Series K9 Actuation: indexed spring return indexed, secured in two positons Pushbutton Cam operation Toggle cam operation Plunger operated Cam
More informationGeneral Catalogue. Manual presses Pneumatic presses Hydropneumatic presses
General Catalogue Manual presses Pneumatic presses Hydropneumatic presses Contents mäder, the company 3 Press workstations 4 Special designs 5 Manual presses Accessories for manual presses 7 mäder presses,
More informationIndustrial rivets according to DIN
Industrial rivets according to DIN 134 Industrial rivets according to DIN Industrial rivets Industrial rivets according to DIN are the classical one-piece type of rivets that are handled both-sided of
More informationRotary Indexing Tables are used in rotary special purpose machines and other types of machines to mount fixtures, work pieces for precision indexing.
GMT Rotary Indexing Tables are used in rotary special purpose machines and other types of machines to mount fixtures, work pieces for precision indexing. The GMT Rotary Indexing Tables are fitted with
More informationMMC CX1 & CX2 SERIES
A Group Company MINSTER BULLETIN 184E P R E S S E S MMC CX1 & CX2 SERIES SINGLE & 2-POINT GAP FRAME PRESSES 45-315 METRIC TONS Material Forming Solutions AFFORDABLE QUALITY WITH MINSTER S INDUSTRY -LEADING
More informationRotary Table/Vane Style
Rotary Table/Vane Style Series Size: 1, 3, 7, 20 Table top deflection mm or less High Precision Peripheral table deflection mm or less X Series B Series A 147 Rotary Table Values inside ( ) are for Series
More informationPneumatic Actuators. 1. DIE CAST ALUMINUM END CAPS: standard polyester powder coated
4 5 Pneumatic s 1 2 6 NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: standard (-4 F;+185 F), high (-4 F;+302 F), low (-40 F;+185 F) Pre lubricated for life of actuator at assembly 100%
More informationJET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More informationMECHANICAL Forging PRESSES WITH KNUCKLE-JOINT
MECHANICAL Forging PRESSES WITH KNUCKLE-JOINT MML / MSL. Mechanical Forging Presses with knuckle-joint. From process development and cost-effective line concepts to full production lines. MECHANICAL Forging
More informationRACK & PINION ACTUATORS 2R40 to 2R1750 Series Installation & Maintenance Manual
TRIAC 2R Series Actuators: Attention: Instructional videos on some of the information provided below can be found on our website (http://www.a-tcontrols.com/videos/). Description Section Installation of
More information8710 EN. Potentiometric Displacement Sensors. Models 8710, 8711
Potentiometric Displacement Sensors Models 8710, 8711 Code: Delivery: Warranty: 8710 EN ex stock 24 months Model 8711 Model 8710 Application Displacement sensors models 8710 and 8711 with resistance tracks
More informationPneumatic Power Clamps
15.61 Pneumatic Power Clamps Series 82M-6 Product Overview (last time in catalog) Features: modular design shielded body, dirt-resistant compact design high holding torques long life cycle low weight (aluminium
More informationPWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
More informationRotary Table/Vane Style
Rotary Table/Vane Style Series MSU Size: 1, 3, 7, 20 Table top deflection mm or less High Precision Peripheral table deflection mm or less CRB2 CRBU2 CRB1 MSU CRJ CRQ2 MSQ MSZ CRQ2X MSQX MRQ Series MSUB
More informationTECHNICAL. AVAILABLE UPON REqUEST CHAPTER CONTENTS. Optical comparator: For process control during serial production.
TECHNICAL INFORmATION INFORmATION ABOUT CV / RE AVAILABLE UPON REqUEST Optical comparator: For process control during serial production. Engineering: Development and design using the latest CAD systems.
More informationINFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES
INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationMAKES LIGHT WORK OF HEAVY LOADS
CR/TH FREELY PROGRAMMABLE ROTARY TABLES CR/TH HEAVY DUTY ROTARY TABLE CR/TH HEAVY DUTY ROTARY TABLE: MAKES LIGHT WORK OF HEAVY LOADS FOR HORIZONTAL AXES User-programmable rotary barrel drive of the TH
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationpull action latch clamps
pull action latch clamps Sizing and Application Chart Click Page # View Max. Holding Capacity N [lbf.] Plunger Travel mm [inch] Series Page MC-PAL-# 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000
More informationElectrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationPull Action Latch Clamps
5.1 Pull Action Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
More informationTOX -Powerpackage Accessories
TOX - Accessories Data sheet 10.10 2017/ 11 Z TOX PRESSOTECHNIK Riedstrasse 4 D-88250 Weingarten GmbH & Co. KG Find your local contact at: 1 TOX - Accessories Accessories for TOX -s Mounting accessories
More informationFeel the Performance Simply produce the best
Feel the Performance Simply produce the best Presses Accessories Controls Special machines 1 GECHTER WORLD WIDE Quelle Weltkarte: cc creative commons WELCOME www.gechter.com Page Solutions 4 The Advantages
More informationTOX -FinePress. Benchtop presses 2 57 kn. Data sheet Riedstrasse Weingarten, Germany. Find your local contact at:
TOX -FinePress Benchtop es 2 57 kn Data sheet 60.10 2018 / 05 TOX GmbH & Pressotechnik Co. KG Riedstrasse 4 88250 Weingarten, Germany Find your local contact at: Toggle Presses KF 2.5 33 kn Changing the
More informationAir Gripper (2 Finger) (3 Finger)
Rotary Actuated Air Gripper ( Finger) (3 Finger) MHR/MDHR, MHR3/MDHR3 High Precision - Repeatability ±0.01mm Parallel opening and closing mechanism utilizing a cross roller guide produces smooth operation
More informationNew CMT Euro Pro Eco Series Euro Pro 135 ton x 3200mm - 7 AXIS
INFORMATION SHEET Page 1 Showroom: 123 Bluestone CCT 17 Mile Rocks Qld 4073 Postal: P.O. Box 3205 Darra Qld 4076 Tel: 07 3279 3344 Fax: 07 3279 3364 Email: sales@completemachinetools.com.au Website: www.completemachinetools.com.au
More informationHYDROKOMP. Clamping Systems. Technology that connects. precise durable varied. Brand name products by Hydrokomp
HYDROKOMP Clamping Systems precise durable varied Brand name products by Hydrokomp Technology that connects HYDROKOMP GmbH Siemensstraße 16, 35325 Mücke (Germany) Phone: +49 6401 225999-0 Fax: +49 6401
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationALFRA PRESS - overview
70 ALFRA PRESS 71 ALFRA PRESS - overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 74 Page 78 Control cabinet housing, Control cabinet doors, Mounting panels Control cabinet housing, Control cabinet doors,
More informationASSEMBLY SYSTEMS. Assembly systems. 387
Assembly systems Assembly systems ASSEMBLY SYSTEMS Series Size Page Assembly systems Pillar profile modular system Pillars Ø 20 mm 390 Pillars Ø 35 mm 394 Pillars Ø 55 mm 398 www.schunk.com 387 Assembly
More informationHydraulic Ram Control Unit HSE NG 10
Hydraulic Ram Control Unit HSE NG 0 Design and Function Common features of VTHL ram control units: modular design robust valve elements high dynamics simple control structure The integration of all necessary
More informationRACK AND PINION PNEUMATIC ACTUATORS, SERIES DC DOUBLE ACTING AND SERIES DJ SPRING RETURN
RACK AND PINION PNEUMATIC ACTUATORS, SERIES DC DOUBLE ACTING AND SERIES DJ SPRING RETURN 6 DC/DJ 20 Issue 10/98 FEATURES Dual-piston rack and pinion design for compact construction, symmetric mounting
More informationPINS & BUSHINGS METRIC
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS METRIC www.danly.com PINS & BUSHINGS METRIC CONTENTS General Information 1 Plain & Ball Bearing Guide Posts Press Fit Guide Posts 2 Demountable
More informationPin Packages Section.Page. Series. Dimensions and technical information are subject to change without notice. Air Consumption at 5 bar [dm3]
Pin Packages 6. Pushing Force (N) at 5 bar Retracting Force at 5 bar Piston Diameter Weight Air Consumption at 5 bar [dm3] Application Area Series Section.Page 0 to 500 [N] 500 to 000 [N] 000 to 500 [N]
More informationRousselle Single Point Gap Frame (Cast Iron)
Single Point Gap Frame 15 to 110 Tons Rousselle Single Point Gap Frame (Cast Iron) Standard Features Cast Frame Air Clutch and Shoe Brake Crankshaft Motion (40 Ton and Up) Eccentric Shaft Motion (15 and
More informationbrochure PN
brochure PN-2013-01 www.bitorq.com/pneumatic.html Pneumatic Actuators PAGES 4-11 ON THE WEB AT BITORQ.COM/PNEUMATIC_PN.HTML COMPACT, RELIABLE DESIGN OPEN-CLOSED ADJUSTMENT STOPS DOUBLE ACTING AND SPRING
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationPINS & BUSHINGS METRIC
PINS & BUSHINGS METRIC PINS & BUSHINGS METRIC CONTENTS PAGE NUMBER General Information 1 Plain & Ball Bearing Guide Posts Press Fit Guide Posts 2 Demountable Guide Posts 4 Automotive Straight Guide Posts
More informationCNC swiss and non-swiss. turning center TNL12K
CNC swiss and non-swiss turning center TNL12 TNL12K TNL12 - Ideal for your production requirements The machine concept of the TNL12 has been matched to the daily re quire ments of the user. But this is
More informationCompact Slide. Series MXH ø6, ø10, ø16, ø20
Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations
More information