Guy Attachments. P151X or P152X. Measurements (in) Overall Length (in) P133AX 3 15/16 1 5/8 13/16 x 1 2 1/2 2 7/8 5 1/
|
|
|
- Charles Harper
- 6 years ago
- Views:
Transcription
1 Provide economical and effi cient means of fastening guys to poles Well rounded wire grooves protect the strand from damage Wherever possible, installation should be made under the head of a machine bolt for down guy applications Guy hooks are not recommended to be mounted on the threaded end of a machine bolt Integral spur style for mounting with a through bolt only P133AX or P135AXW P134AXW or P134BX P151X or P152X P157X A B C D E P133AX 3 15/16 1 5/8 13/16 x 1 2 1/2 2 7/8 5 1/ P134AXW 3 3/8 1 9/16 13/16 x 7/8 2 3/8 2 5/8 4 3/ P134BX 3 5/8 1 5/8 13/16 x 15/16 3 1/4 2 3/4 5 3/ P135AXW 3 1/8 1 1/2 11/16 x 3/4 2 1/8 2 1/2 4 1/ P151X 2 7/8 1 1/4 11/16 2 3/4 1 7/8 3 3/ P152X 3 1/8 1 3/8 13/16 2 3/4 2 3/8 4 1/ P157X 3 5/8 1 1/4 13/16 2 3/4 2 3/8 4 1/ PH-81
2 Provide economical and effi cient means of fastening guys to poles Installation should be made under the head of a machine bolt for down guy attachments Guy hooks are not recommended to be mounted on the threaded end of a machine bolt Integral teeth in the bottom base eliminate the need for a lag screw in the base P138 P138 A B C D E P / /16 15/ /8 6 1/ These guy hooks feature a base with integral teeth Hole for installation of a 1/2 diameter lag screw provides additional resistance to movement A B C D E F P133A 2 7/8 3 5/8 1 5/8 13/16 9/16 2 1/2 5 1/ P135A 3 1/2 3 3/4 7/16 11/16 9/16 2 1/2 4 3/ PH-82
3 These guy hooks feature a base with integral teeth Hole for installation of a 1/2 diameter lag screw provides additional resistance to movement J6555 1/2 11/ J6556 9/16 13/ Mounting s A B C R Top Bottom Min Ultimate Strength G764X2 3/ /16 7/8 7/8 or 3/4 5/8 to 3/ G864X2 3/ /16 7/8 7/8 or 1 1/2, 5/8 or 3/ PH-83
4 Corrosion resistant aluminum alloy with integral teeth in the base bottom to resist movement Aluminum alloy Figure 1 Figure 2 Figure 3 Fig Mounting s A B C D Top Bottom Min Ultimate Strength (lbs) AG-5 1 7/16 2 1/4 3 1/4 5/8 11/16 5/8 1/ AG-5X 3 7/16 2 7/8 3 1/4 5/8 11/16 5/ AG-6 1 1/2 2 1/4 3 7/16 11/16 13/16 3/4 1/ AG-6X 3 1/2 3 1/2 3 5/8 7/8 13/16 3/ AG-7 2 3/ /8 1 15/16 7/8 3/ Notes: Figure 2-1/2 lag screw or 3/4 through bolt may be used in bottom hole if desired For use with formed guy grips, bail type automatic deadends, and bail type wirevise deadends. Ultimate Strength 20,050 lbs at 45 degree guy angle. GAD-56-X GAD-56-4 GAD-56-X 13/ GAD / PH-84
5 Formed steel hot dip galvanized Steel Size J x 3/16 11/ Ductile iron hot dip galvanized Thimble Diameter SGA-6 1/2 5/8 or 3/4 1 1/2 54 SGA-6 Two J1019 guy hooks are normally mounted on opposite sides of a pole under two turns of guy strand to prevent the strand from slipping on the pole. The rounded side of the 1 /4 x 3/8 half oval steel prevents damage to the guy strand and its galvanized coating. Steel hot dip galvanized J /16 80 J1019 PH-85
PART NUMBER POLE DIAMETER RANGE CARTON QTY " to 5" " to 6 3 4" " to 7 3 4" " to 8 3 4" 10
PH1 Offset Pole Band Bands Single Double Offset Pole Bands are used for dead-ending, guying, and mounting secondary racks on metal poles, pipe masts, or conduit. Each Pole Band Assembly contains two 1
CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary
14B-2 Type M3 Hookstick Disconnect Switches Up to 38kV 0 or 900 Amp 40kA Momentary Application The Chance Type M3 Disconnect Switch is a single-phase hookstick operated switch. It is for manual switching
Bolted Dead End for OPGW
Bolted Dead End for OPGW The AFL Dead End is a full tension termination for Optical Ground Wire cable. Breakaway head bolts are used to apply a precise gripping force to hold the cable without affecting
FIBERGLASS DEAD-ENDS & TANGENT ARMS
FIBERGLASS DEAD-ENDS & Index FIBERGLASS DEAD-ENDS & Introduction.... 1 Dead-End Arm s.... 2 Dead-End Arms Code.... 3 FDA20 Series.... 4 FDA25 Series.... 5 FDA30 Series.... 6 Tangent Arms Series.... 7 Tangent
The reinforcing rods are incorporated in this assembly to ensure the optical fibres within the OPGW Range
OPGW Suspension Assemblies Optical Fibre Cable Same lay as OPGW outer stranding H Reinforcing rods opposite lay to OPGW outer stranding S L Application Heliformed suspension assemblies designed for use
Outside Plant Hardware
Outside Plant Hardware The MSI Experience...When Support Counts! 2/2015 Our Heritage MacLean Senior Industries (MSI), formed by merging of the communications business of MacLean Power Systems with Senior
Distributed by Tri-State Equipment Company Inc
COFFING LHH Models - Stamped steel hand chain hoists are an excellent low cost option in the Coffing line. The compact, lightweight design is ideal for construction and contractor applications where portability
LINE FITTINGS I N D E X
LINE FITTINGS I N D E X LINE FITTINGS Anchor Shackles Type AS. Page C-2 Ball Eye Links Type BEL...Page C-3 Ball Clevis Type BC. Page C-4 Clevis Tongues Type CT.Page C-5 Twisted Clevis Tongues Type TCT.
Fiberglass Construction Products
12 Fiberglass Construction Products Catalog 12 Page 12-1 Fiberglass Construction Products Standoff Brackets With over 50 years of experience in manufacturing Chance Fiberglass Rod polymer insulation products,
Stanley Hand tools Stanley Bi-Material adjustable WrencheS. Stanley cushion grip adjustable WrencheS. Stanley adjustable WrencheS.
Stanley Bi-Material adjustable WrencheS Tapered jaw design allows for work in limited space applications. Slip-resistant Bi-Material handle for a comfortable grip. Wide-capacity jaw accepts a wide range
Section 6 FIBERLIGN Hardware for ADSS
FIBERLIGN Hardware for ADSS: Section 6 Section 6 FIBERLIGN Hardware for ADSS Table of Contents Page Fiber Optic Product Layout for ADSS...6-2 FIBERLIGN Lite Tension Dead-end for ADSS...6-3 FIBERLIGN Dielectric
Blanking plate: To incorporate spare positions. 1. With M6 screws for installation from the connection blocks.
Directional control valves Accessories P2AX - 5/2 and 5/3 P2AX, flexible manifold assembly A practical system solution with the aid of connection pieces. The manifolds can easily be assembled from the
Choose the Specified Leader in Utility Products... Little Mule
Choose the Specified Leader in Utility Products... Little Mule Request the Lineman s Products Catalog Featuring Strap Hoists, Link or Roller Chain Lever Hoists, Wire Grips, and Cable Pullers. Ask For Publication:
TECHNICAL INFORMATION Model No. Description
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2450, HR2451, HR2452 24mm (15/16 " ) Rotary Hammer The above models are the advanced version of MAKITA's famous
Mechanical Hoists. Catalog 1100 July Hoists - Mechanical Phone: Web: hubbellpowersystems.
Mechanical Hoists Catalog 1100 Page 1101 RATCHET HOISTS User-friendly operation and construction. Experienced operators prefer CHANCE lever hoists for longterm, dependable performance. Light-weight for
Steel Fabrications Equipment Brackets
April 2004 Page 25 of 43 H. R. Steel; Each bracket includes (2) 1/2 x 1 hex bolts, flat washers, and special retaining clips as well as (1) 1/2 x 2 captive carriage bolt, shake proof washer, lockwasher,
HUBBELL Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary
Catalog 14B January 2015 HUBBELL Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary Application The Chance Type M3 Disconnect Switch is a single-phase hookstick operated switch.
Table of Contents. Optical Ground Wire Hardware. Tools. Assemblies. ADSS Mini-Span Hardware. ADSS Hardware. Installation Instructions
Table of Contents Optical Ground Wire Hardware Bolted Dead End..................................... 3 Dead End Link Plate.... 6 Comealong......................................... 7 HIBUS OPGW Suspension...
WARRANTY TERMS AND CONDITIONS OF SALE
WARRANTY Products manufactured by Coastal Line Products (CLP) are warranted to be of good workmanship and material for a period of three years from date of delivery. This warranty applies only to products
WINNING ELECTRICAL CO., LIMITED
A silicone polymer line post insulator mainly consists of a core rod (ECR type or FRP type), silicone rubber housing and metal end fittings. Usually, polymer line post insulators are mounted to a supporting
Company Profile. ZTT Cable was established in 1992, and now becomes a public high-tech enterprise with 33 subsidiaries, and about 7,000 employees.
Company Profile ZTT Cable was established in 1992, and now becomes a public high-tech enterprise with 33 subsidiaries, and about 7,000 employees. We provide products such as electrical fittings, optical
Product Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
Standard Chainwheel
Product Catalog Standard Chainwheel Standard Chainwheels are our most economical model for operating valves in high, normally out-of-reach locations. Chainwheels easily attach to the hand wheel of valves
PLATEFORM MOUNTS Page 19 of 124
PLATEFORM MOUNTS Page 19 of 124 Plateform Mounts Featuring: Plateform Mounts Heavy-Duty Plateform Mounts Multiplane Mounts LORD Plateform Mounts provide effective isolation against vibration. The contour
Section 5 Fiber Optics: FIBERLIGN Hardware for OPGW
FIBERLIGN Hardware for OPGW: Section Section Fiber Optics: FIBERLIGN Hardware for OPGW Table of Contents Page Fiber Optic Product Layout for OPGW...-2 FIBERLIGN ead-end for OPGW...-3 FIBERLIGN Formed Wire
Yale HOISTS. 414 West Broadway Ave. P.O. Box 769 Muskegon, MI PH: FX:
Yale HOISTS! To Avoid Injury: Do not exceed working load limit, load rating, or capacity. Do not use to lift people or loads over people. Read and follow all instructions. 44 West Broadway Ave. P.O. Box
Ground Connectors All Copper Alloy Specification Grade
Connectors For cable connection parallel or at right angles to pipe or rod. Features A high strength corrosion-resistant copper alloy ground connector connecting a ground wire either parallel or at right
ARMOR-GRIP Suspension: Double
: Double For Line Angles Between 30 and 60 ACSR, All-Aluminum, Aluminum Alloy, AWAC Compacted All-Aluminum Compacted ACSR, ACSS, ACSS/TW Range AGS s AGS AGS s & Min. Max. Nominal Conductor Size s Per Set
TRANSMISSION PRODUCTS
TRANSMISSION PRODUCTS INDEX Deadends bolted/aluminum AR1/AR2... QUADRANT STRAIN CLAMP...TA-4 PG/DE... QUADRANT STRAIN CLAMP...TA-3 SD... QUADRANT STRAIN CLAMP...TA-1 SDT2... DOUBLE GROOVE STRAIN CLAMP...TA-2
2.54mm Pitch Inline Two-Piece Connector
2.54mm Pitch Inline Two-Piece Connector 232D Series FEATURE 232D series is a 2.54mm pitch connector and designed for connection of main unit and main line in PBX. Compact, light-weight and variety of connector
EARTH WIRE FITTINGS 08
EARTH WIRE FITTINGS 08 8 EARTH WIRE FITTINGS 119 Contents General... 120 C-bracket... 123 Suspension clamp with bolt, with straps, for steel and copper conductors... 123 Suspension clamp with bolt, with
MXL Timing Belt Pulleys
MXL TIMING BELT PULLEYS Quality 15 15 MATERIAL: 2024-T4 or 2024-T351 Aluminum Alloy FINISH: Clear Anodize QPMMXLA25015F03 QPMMXLA250F03 QPMMXLA2501F04 QPMMXLA25020F04 15 1 20 3 (.111) Tolerance : 3 mm
229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
TECHNICAL INFORMATION
TECHNICAL INFORMATION PRODUCT P 1 / 15 Model No. Description HR2455 Rotary Hammer 24mm (15/16") L W CONCEPT AND MAIN APPLICATIONS Model HR2455 has been developed as a sister tool to Model HR2450, the Makita
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers
Slack Span Dead-end GENERAL RECOMMENDATIONS NOMENCLATURE (440)
NOMENCLATURE Material Helical Leg Section: Aluminum covered steel. An aluminum alloy version is available for corrosive environment. Contact PLP. Crossover Marks: Indicates starting point for application
P Series Puller 1000 and 2000 lb Capacity
P Series Puller 1000 and 2000 lb Capacity Features / Wire Puller: 4:1 design factor. Meets SM 30.21. Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. ll steel parts
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
MATERIAL FOR FIBRE OPTIC LINES. General C-bracket HSU trunnion type, forged, for aluminium based OPGW conductors...
153 Contents General.................................................................................................. 154 C-bracket.................................................................................................
Lineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips
Lineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips Extra Measure of Reliability Fiberglass Handle and Polyester Webbing Provides added nonconductive material when using proper hot line handling
MODEL: PX10-200ET70 / PX15-280ET140
HIGH PRESSURE CLEANER - COLD WATER PETROL DRIVEN MODEL: PX10-200ET70 / PX15-280ET140 3000PSI 4000PSI PROFESSIONAL Pumps Australia Eurotec petrol driven high pressure cleaners have been manufactured to
Product catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
OPTOFIT CATALOGUE. FITTINGS FOR METALFREE (ADSS CABLES) and METAL ARMOURED (OPGW & OPPW) AERIAL CABLES WITH INTEGRATED OPTICAL FIBRES.
OPTOFIT CATALOGUE FITTINGS FOR METALFREE (ADSS CABLES) and METAL ARMOURED (OPGW & OPPW) AERIAL CABLES WITH INTEGRATED OPTICAL FIBRES. EXCLUSIVE AUSTRALIAN DISTRIBUTORS B8/8 Introduction Metalfree (ADSS
ARDUINO 2WD SMART ROBOT CAR KIT
EN ARDUINO 2WD SMART ROBOT CAR KIT P a g e 2 PARTS LIST Please make sure that the following pieces are included in your kit Component Quantity Remarks Arduino Sensor Shield v5.0 1 Align pins using needle
Wire rope accessories. 5. Wire rope accessories. Index
Wire rope accessories 5. Wire rope accessories 1 General 1.1 About Hendrik Veder Group 1.2 Trade names 1.3 Certified Quality 1.4 Certificates 1.5 Key suppliers & brands 1.6 Contact information 1.7 Locations
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
Solar Integrated light. Protect your property with the power of sunlight
Solar Integrated light Protect your property with the power of sunlight Features Adjustable Solar Panel Light up any location thanks to a fully adjustable solar panel that maximizes power generation wherever
Read me first!... 3 Important precautions Table of contents. About your G Lasher Using your G Lasher Appendix: Parts summary...
GMP G Lasher Table of contents Read me first!................... 3 Important precautions............ 4 Check your machine first........................ 4 Use the proper safety equipment..................
When buying Crosby you re buying more than product, you re buying Quality.
From a 2 ton capacity snatch to a 6000 metric ton capacity crane, McKissick can make a McKissick s major involvement in the block McKissick When buying Crosby you re buying more than product, you re buying
IDS ILLINOIS, LLC. 2000/2500 DEVICE & OPERATOR
IDS ILLINOIS, LLC. 2000/2500 DEVICE & OPERATOR INSTALLATION MANUAL 922 Geneva Street Shorewood, IL 60404 PH: 815/730-0050 FX: 815/730-0057 IDS ILLINOIS, LLC. Quick List Quick Reference for Installation
D-73P disconnect and bypass switches
Switches atalog Data 008005EN Supersedes pril 2016 OOPER POWER SERIES D-73P disconnect and bypass switches ontents Description Page D-73P disconnect switch....2 D-73P3 bypass switch....5 D-73P-D cutout
TECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description DP4010, DP4011 2-Speed Drill 13mm (1/2") L PRODUCT P 1/ 8 CONCEPT AND MAIN APPLICATIONS Models DP4010 and DP4011 have been developed as 13mm (1/2") Drill for
LADDERS If the top of the ladder is secured to Do not throw tools or materials to a craftsman
BSP 460-300 108-i01_1969 12 0l.jpg Scanned by Frank Harrell, (Cowboy Frank) Castle Rock, Colorado Oct 07, 2012 21:15:33 BELL SYSTEM PRACTICES Plant Series SECTION 460-300-108 Issue 1, December 1969 AT&TCo
Exhaust Nozzles. High temperature resistant rubber and metal exhaust hoses
High temperature resistant rubber and metal exhaust hoses Nederman offer an extensive range of robust rubber and metal vehicle exhaust extraction nozzles to accommodate various types of vehicles and systems
FIG Gruvlok Flanges
Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the
SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
The applicable material specifications for ductile iron and rubber gaskets apply:
72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures
HOISTS RATCHET LEVER HOISTS
Yale HOISTS RATCHET LEVER HOISTS Yale PE & RS Ratchet Lever Hoist / to ton capacities Link chain models Light and portable Weatherized load brake Requires less handle pull to lift full load Efficient Yale
STRAIN LINK STICK ROLLER LINK STICK ADJUSTABLE STRAIN POLES SPIRAL LINK STICK TRANSMISSION TOOLS
172 Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com STRAIN LINK STICK Used as insulation between rope blocks and a hot line wire grip For deadend structures and running corners Attached to conductor
B U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
INSULIGN Guy Strain Insulators Fiberglass
NOMENLTURE GENERL INFORMTION Preformed Line Products INSULIGN Guy Strain Insulator series is intended for use with down guys or pole-to-pole guys on overhead lines. The insulative fiberglass rod electrically
PROVEN PERFORMANCE RELIABILITY EASY INSTALLATION
SERIES COOLING TOWER SINGLE-CELL UP TO 1750HRT COOLING CAPACITY EX-S High Performance Crossflow ow Type PROVEN PERFORMANCE RELIABILITY EASY INSTALLATION EX-S SERIES COOLING TOWER SINGLE-CELL UP TO 1750HRT
Details of Option Specification Code - D091
Specification : D091 Title: Configuration of Manual Operator 1/5 Handle type operator or gear type operator shall be specified. Note) The operator shall be specified with a code in this section when receiving
Features of the Ball Screw
Features of the Driving Torque One Third of the Sliding Screw With the, balls roll between the screw shaft and the nut to achieve high effi ciency. Its required driving torque is only one third of the
Model CV-1FR Grooved-End Riser Check Valves 2 Inch to 12 Inch (DN50 to DN300) General Description. Installation. Technical Data
Worldwide Contacts www.tyco-fire.com Model CV-FR Grooved-End Riser Check Valves Inch to Inch (DN0 to DN00) General Description The TYCO Model CV-FR Grooved- End Riser Check Valve is a compact and rugged
Minimally protruding jaw shank for greater capacity in tight spaces.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
Style 99 Roust-A-Bout Couplings
R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings
AHEAD OF THE FLOW. Butterfly Valves
CATALOG C-BFV-1201 TM AHEAD OF THE FLOW Butterfly Valves General Index Butterfly Valves WARRANTY..........................................4 BUTTERFLY VALVES..................................5-27 OPTIONS
STEEL WIRE & ROPE FITTINGS
6 Beaver maintains a wide range of wire rope and fittings that can be used for towing and lifting applications. Furthermore Beaver has the ability to offer manufactured slings made to order. With Beaver
FIG Gruvlok Flange Adapter
FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method
Style Flange Adapter
Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved
AVK SERIES 854 BALL FLOAT VALVE FIELD MAINTENANCE AND INSTRUCTION MANUAL FOR BALL FLOAT VALVES
AVK SERIES 854 BALL FLOAT VALVE FIELD MAINTENANCE AND INSTRUCTION MANUAL FOR BALL FLOAT VALVES TABLE OF CONTENTS GENERAL SERIES 854(TYPICAL EXPLODED VIEW) COMPONENT LIST INTRODUCTION TO AVK/GLENFIELD SERIES
GRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
Hook & Eye Turnbuckles
Hook & Eye Turnbuckles HG-225 Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4 through 1, a shackle one size
1.6 Features of common gears
1.6 Features of common gears Chapter 1.2 covered briefly on types of gear. The main gear features are explained here. Helical gear Helical gear has characteristics of transferability of larger load, less
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY 129 HYDRANT YESTERDAY, TODAY, & TOMORROW For more than 85 years, the M&H
INSTRUCTIONS BENCH TYPE COIL WINDER DRIVES MODELS: 2057, 2067, AND 2069
INSTRUCTIONS BENCH TYPE COIL WINDER DRIVES MODELS: 2057, 2067, AND 2069 The Crown bench type Coil Winder Drive is small, rugged and durable unit used for winding coils from the smallest solenoid type to
Chain Drives. Pitch. Basic Types -There are six major types of power-
1 2 Power transmission chains have two things in common; side bars or link plates, and pin and bushing joints. The chain articulates at each joint to operate around a toothed sprocket. The pitch of the
TECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification GA4030, GA4530, GA5030 Angle Grinders 100mm (4"), 115mm (4-1/2"), 125mm (5") GA4030/ GA4530/ GA5030 are small diameter
Series LS16K Hydraulic Cable Winches
Series LS16K Hydraulic Cable Winches Lift-Safe hydraulic winches are specifically designed for lifting applications and optimum load control. Engineered for enhanced safety with redundant braking systems,
DRS. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE /A40-115-1.1M, /A40-140-1.1M, /A40-136-1.1M, /A40-150-1.8M 203 PERFORMANCE CURVE /A40-136-1.4,
AWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
Fax Pac. Faxable Information Little Mule Products LMFP-1
LMFP-1 Fax Pac Faxable Information Little Mule Products Publications LMC-2 and LMU-3 Cable Lineman s Strap Ratchet Lever Hand Chain Electric Chain Hoists Wire Grips Trolleys Beam Clamps Accessories Extra
Product Comparisons. Door Closers. stanleysecurity.com
Yale 4400 Series Certification STANLEY QDC100 Yale 4400 Series Certified BHMA/ANSI A156.2 Series Grade 1 Yes Yes UL 10B Yes Check with Manufacturer Warranty STANLEY QDC100 Yale 4400 Series Mechanical Warranty
3/8-Inch Torque Wrench Square Drive, Torque Range Of 30 to 250 Inch Pound (3.39 to NM)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 57005 3/8" Torque Wrench Square Drive Klein Tools Catalog Number 57005 Manufacturer Klein Tools 3/8-Inch Torque Wrench
BRACKETS, MOUNTS & HARDWARE
HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,
OPERATION AND MAINTENANCE MANUAL 2-66 SERIES 2500 RESILIENT WEDGE GATE VALVE
OPERATION AND MAINTENANCE MANUAL 2-66 SERIES 2500 RESILIENT WEDGE GATE VALVE INDEX SERIES 2500 DUCTILE IRON RESILIENT WEDGE GATE VALVE OPERATION and MAINTENANCE MANUAL. OPERATION AND MAINTENANCE Operation,
SUSPENSION 04 CLAMPS
SUSPENSION CLAMPS 04 4 SUSPENSION CLAMPS 57 Contents General... 58 Suspension clamp trunnion type, forged,... 63 Suspension clamp trunnion type, forged, with bigger angle of deflection, for aluminium based
New. Axle Spindles. Universal Tie Plates. Tie Plates. Axle Tie Plate Kits. Includes: nut, washer and cotter pin.
Axle Spindles Spindle Bearing Description Surface Part # 1-1/4 x 7 1 80055 1-1/4 x 7 (a) 1-1/16 80060 1-3/4 x 8-1/4 1-1/16 x 1-3/8 80235 2 x 8-1/4 1-1/16 x 1-3/8 80325 Eliminator, 1,750# (b) 80324 Nut/Washer/Cotter
EARTHING AND SHORT CIRCUIT LANCE DEVICE RAILWAYS
HV EARTHING AND SHORT CIRCUIT LANCE DEVICE For use on maintenance operation and reparation of system parts electrically insulated of interconnection station of hv with air insulation: on coloumn support
sump units end caps and connectors 2018 PRICE LIST VIBRO-BASE / EVO SERIES R SERIES
sump units end caps and connectors VIBRO-BASE / EVO SERIES R SERIES 2018 PRICE LIST CONCRETE SUMP UNITS FOR VIBRO-BASE SERIES AND R SERIES CONFORMING TO THE EN 1433:2008 STANDARD CONCRETE SUMP UNIT COMPONENTS
Distribution Arresters
Heavy Duty & Riser Pole Ÿ Tested to the latest IEEE C62.11 standards Ÿ High Strength Fiberglass Isolator Brackets Ÿ Ground Lead Disconnect will operate with a minimum of 1 amp Ÿ Protective Cap RUS APPROVED
BRENCO. Aerial Tools & Equipment
BRENCO 81 C2 Cable Lasher For cables or cable bundles up to 1.87 in. (4.7 cm) on strands 1/4 in. to 3/8 in. Positive mechanical brake prevents lasher back-up until brake is released. Built to last, the
STANDARD 80 SERIES GUYED TOWER GENERAL USE FEATURES. Phone (309) Fax (309) The Industry Standard
G GUYED TOWERS - 80 STANDARD 80 SERIES GUYED TOWER 80 SERIES GENERAL USE The ROHN Model 80 Guyed Tower is designed with variable sized legs and braces to allow construction to heights of 1000. This tower
For RBI Solar Ground Mount only
Washer, Electrical Equipment Bond WEEB Patent Pending INSTALLATION INSTRUCTIONS For RBI Solar Ground Mount only Please read carefully before installing. WEEB-UMC WEEBL-6.7 WEEB Bonding Jumper-6.7 Products
JEEVES. JEEVES Installation Manual. Installation Manual The Easiest Do-It-Yourself Dumbwaiter on the Market
1 888-323-8755 www.nwlifts.com JEEVES Installation Manual The Easiest Do-It-Yourself Dumbwaiter on the Market This manual will cover the installation procedure step-by-step. The installation of this dumbwaiter