Axial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
|
|
- Abner Kelley
- 5 years ago
- Views:
Transcription
1 Brand S Nuts - Metric Mating Screw Recommended Tightening Torque, (N m) S-M2-0ZI S-M2-1ZI S-M2-2ZI S-M2.5-0ZI S-M2.5-1ZI S-M2.5-2ZI S-M3-0ZI S-M3-1ZI S-M3-2ZI S-M3.5-0ZI S-M3.5-1ZI S-M3.5-2ZI S-M4-0ZI S-M4-1ZI S-0M4-2ZI S-M5-0ZI S-M5-1ZI S-M5-2ZI S-M6-00ZI S-M6-0ZI S-M6-1ZI S-M6-2ZI S-M8-1ZI S-M8-2ZI S-M10-1ZI S-M10-2ZI S-M12-1ZI
2 Brand SP Nuts - Metric Mating Screw Recommended Tightening Torque, (N m) SP-M SP-M SP-M SP-M SP-M SP-M SP-M SP-M SP-M SP-M SP-M SP-M SP-M SP-0M SP-M SP-M SP-M SP-M SP-M SP-M SP-M SP-M
3 Brand CLS Nuts - Metric Mating Screw Recommended Tightening Torque, (N m) CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-0M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M CLS-M
4 Brand CLA Nuts - Metric Mating Screw Recommended Tightening Torque, (in. lbs.) w/180 ksi Develop Min. Aluminum Steel Stainless Steel Steel Steel Screw, kn Axial, MPa 2024-T4 PC 5.6 A2-70 PC 8.8 PC 10.9 PC 12.9 CLA-M CLA-M CLA-M CLA-M CLA-M CLA-M CLA-M CLA-M CLA-M CLA-M CLA-M CLA-M
5 Brand SH, HNL and H Nuts - Metric Mating Screw Recommended Tightening Torque, (in. lbs.) SH-M6-1X SH-M6-2X SH-M8-1X SH-M8-2X SH-0M10-1X HNL-M6-LZ HNL-M8-LZ HNL-M10-LZ H-M10-ZI
6 Brand SMP Nuts - Metric Mating Screw Recommended Tightening Torque, (in. lbs.) SMPS-M SMPP-M SMPS-M SMPP-M SMPS-M SMPP-M
7 Table I Material Properties for Selected Strength Levels of Mating Screws UNIFIED Unified Units Metric Units Industry Material Strength, ksi Yield/Tensile Material Strength, MPa Standard Designation Ultimate Yield Ratio Ultimate Yield SAE J429 Grade ASTM 593 Grade C SAE J429 Grade SAE J429 Grade ASTM A574 (see note 3) METRIC ISO Property Class ISO Property Class ISO 3506 A ISO Property Class ISO Property Class ISO Property Class ISO Property Class Table II Material Properties Brand Unified Units Metric Units Nut Nuts Using Material Strength, ksi Yield/Tensile Material Strength, MPa Material This Material Ultimate Yield Ratio Ultimate Yield HNL Not Heat Treated Steel S, SS, H Standard Heat Treat SH Special Heat Treat Stainless CLS, CLSS, SMPS 300 Series Steel SP, SMPP A286 Age Hardened Aluminum CLA 2024-T Notes: 1) Other industry standards exist which define the same or similar strength levels. 2) Values in blue are conversions using 1 MPa= psi. 3) Minimum yield adjusted up to 162 ksi (90% of 180 ksi) from the 153 ksi required by ASTM A574.
Axial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
Brand S Nuts - Unified S-256-0ZI 665 180 2.6 2.9 4.1 5.8 7.3 S-256-1ZI 665 180 2.7 3.1 4.4 6.2 7.7 S-256-2ZI 665 180 2.7 3.1 4.4 6.2 7.7 S-348-0ZI 800 180 3.8 4.3 6.1 8.6 11 S-348-1ZI 875 180 4.1 4.7 6.6
More informationSNAP-TOP STANDOFFS BULLETIN SSA 708 R E V. 409
SNAP-TOP STANDOFFS BULLETIN SSA 708 R E V. 409 SNAP-TOP STANDOFFS PEM SNAP-TOP Standoffs (s SSA, SSS, SSC, KSSB) are designed for permanent installation into metal panels or PC boards. These all-metal
More informationSELF-CLINCHING STUDS AND PINS
SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the
More informationGyrolok Flareless Tube Fittings Tubing Data Charts
Gyrolok Flareless Tube Fittings Data Charts DESIGN HOKE Gyrolok Flareless Tube Fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities.
More informationProduct Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
More informationS E L F - C L I N C H I N G S T U D S A N D P I N S
S E L F - L I N I N G S T U D S A N D P I N S SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard
More informationMorehouse Instrument Company
The Morehouse Universal Calibrating Machine is designed to use a compression force standard, proving ring or load cell to calibrate units under test in compression and tension. The reference standard and
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationCouplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
More informationVIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS
Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,
More informationSERIES: VLS. INTERCHANGE: With similar couplings MAIN APPLICATIONS. Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant
INTERCHANGE: With similar couplings MAIN APPLICATIONS Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant VLS series is the screw to connect coupling with poppet style valving,
More informationA PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
More informationPFM6 Digital Portable Hydraulic Tester
PFM6 Digital Portable Hydraulic Tester temperature Helical tube pressure gauge One toggle switch to control power and pressure Platinum resistance temperature sensor Pressure surge protection with internal
More informationVIKING SG SERIES SINGLE PUMPS (WITH SHAFT SEAL)
SERIES SG-04, -05, -07, -10, -14 () Page 341.1.1 OPERATING RANGE: SERIES SG-04/-05 PUMP SG Pumps (, Lip or Mechanical Sealed) Displacements No. 29 Flow Range Pressure Range Temperature Range Viscosity
More informationare widely used because they provide a standardized surface for testing.
Steel Panels Steel panels are made from standard low-carbon, cold-rolled steel complying with ASTM A1008, A-109 and QQS- 698. Smooth Finish Steel Panels, Type QD have a smooth, bright finish produced at
More informationFlat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings
ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face
More informationPiling Product Guide Edition. Servicesteel.org
Piling Product Guide 2017 Edition Strong Foundations Starith Service Steel Service Steel Supplies All Your Foundation Products You Are Our Number One Priority From industry leading steel sheet piling to
More informationQUALITY HYDRAULIC PRODUCTS
QUALITY HYDRAULIC PRODUCTS N.R.P. ISO9001 Certified Quality System NRP- JONES Has What it Takes to Build Your Business! Over a half-century of experience helps you build customer satisfaction while increasing
More informationKOENIG-expander CV PLUGS THE WORLD S LEADING SEALING SYSTEM
KOENIG-expander CV PLUGS THE WORLD S LEADING SEALING SYSTEM 2011 JOINED TO LAST. Table of Contents CV 143 - English Anodized Aluminum Sleeve, Stainless Steel Ball CV 163 - English Allodined Aluminum Sleeve,
More informationRuland. Carefully Made Shaft Collars and Couplings
Ruland Carefully Made Shaft Collars and Couplings Shaft Collars & RIGID couplings Shaft Collars from RULAND Ruland shaft collars are offered in multiple styles to fit shafts ranging from 1/8" to 6" in
More informationSECTION DIMENSIONS & PROPERTIES. Elastic Section Modulus About X-X. Radius of Gyration About X-X. (in 3 ) r x. (in) I y
r h s 6 10 COLD FORMED STRUCTURAL S DIMENSIONS & PROPERTIES IMPERIAL DIMENSIONS PROPERTIES Depth of Flange idth Length of Lip Thickness of Steel Area of Aout - Aout - Aout - Aout - Local of Minor Principal
More informationFemale - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101
atalog 4400 US Visual Index Use with 781, 782T, 782ST hoses. 10178-94 10678-94 13978-94 NPTF Pipe Male - Rigid JI 37 ode 61 11578-94 1478-95 11778-95 14F78-95 11978-95 14N78-96 ode 62 (5000 psi) 1678-96
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationBolt Torque Values - FLUOROLON (Sheet Ring Gaskets / Raised Face Flanges)
Bolt Torque Values - FLUOROLON (Sheet Ring Gaskets / Raised Face Flanges) Sheet Ring Gaskets on ASME B16.5 Raised Face Flanges with ASTM A193 Gr. B7 / A194 Gr. 2H Nuts Sheet Ring Gaskets on ASME B16.5
More informationThreaded Bar and Accessories
ed ar and ccessories old Rolled ed ar and ccessories pprox. Major ar Grade # # #4 0 0 0 #2 Nomal / 2 /4 / 5 2 /4 55 2 /4 55 2 /2 64 2 /2 64 /2 9 M. Net rea Thru s 2 ( 2 ) 0.7 5.0.000 6.0.270 9.0.5 06.0
More informationM/s Eiffel Building Material Trading L.L.C. Al Quos Dubai. M/s Golden Tools Trading Riyadh- Saudi Arabia. M/s New Chrome Fasteners Oman
We are please to introduce ourselves as the manufacturers of Threaded Rods Zinc Plated, Plain, Hot Dip Galvanized and Stainless Steel grade 04/6, Anchor bolts/foundation Bolts, Expansion bolts, U bolts,
More informationDescription of Bolt Torque Tables
Maximum (preferred) torque required per bolt (foot pounds) to arrive at the maximum available / recommended gasket stress shown in the previous column. (4) Maximum gasket stress recommended or available
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationGRADE 2 ELEVATOR BOLTS* Inch Series STEEL ZINC STAINLESS. Weight/ Boxes/ Full Case. Full Case
NO. 1 NORWAY FLAT COUNTERSUNK HEAD - 20 x 3/4 - -1/2-3/4-20 x 2-20 x 2- - 20 x 2-1/2-20 x 2-3/4-20 x 3-18 x 3/4-18 x 1-18 x 1-3/4-18 x 2-18 x 2- - 18 x 2-1/2-18 x 2-3/4-18 x 3-16 x 1-16 x 1- - 16 x 1-1/2-16
More informationJIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
More informationMG02 - MGE02 STEERABLE WHEEL MOTORS T E C H N I C A L C A T A L O G
MG02 - MGE02 STEERABLE WHEEL MOTORS T E C H N I C A L C A T A L O G Steerable wheel motors MG02 - MGE02 POCLAIN HYDRAULICS Methodology : This document is intended for manufacturers of machines that incorporate
More informationChlorine Gas Valves Robust Valve
Robust Valve Robust Valve The Sherwood Exclusive Robust Valve features a heavy-duty body and packing nut for increased load carrying capacity and resistance against stress corrosion and cracking. Key Features
More informationCYLINDRICAL ROLLER BEARING CATALOG TIMKEN THRUST AND PLAIN BEARINGS CATALOG
CYLINDRICL ROLLER BERING CTLOG TIMKEN THRUST ND PLIN BERINGS CTLOG Spherical Plain Bearings SPHERICL PLIN Overview: Timken s spherical plain bearings consist of a spherically ground inner ring housed in
More information2 nd International Conference on Timber Bridges. Ryan Woodward Ted Zoli. Las Vegas, Two Bridges Built Using Black Locust Wood
2 nd International Conference on Timber Bridges Ryan Woodward Ted Zoli Las Vegas, 2013 Two Bridges Built Using Black Locust Wood Squibb Bridge Brooklyn, NY TWO BRIDGES BUILT USING BLACK LOCUST WOOD 2 12-6
More informationHeader Manifolds - 0 Design
Header Manifolds - 0 Design Header block mounting hardware is supplied. See page 179 for itemized list. Ordering Information Specifications, descriptions, and dimensional data are subject to correction
More informationFlush Head Self Clinching Studs
SB Flush Head Self Clinching Studs Features Provide permanent male threads in sheets as thin as.040 (1.00mm). Ribbed self-clinching design mounts flush on the back of the sheet while transferring excellent
More informationHIGH STRENGTH, ECONOMICAL AND EXCELLENT QUALITY STEEL PIPE PILES DELIVERED TO YOUR EXPECTATIONS
ESC STEEL PIPE PILES LSAW, SSAW & ERW PIPES HIGH STRENGTH, ECONOMICAL AND EXCELLENT QUALITY STEEL PIPE PILES DELIVERED TO YOUR EXPECTATIONS Pipe Piles can be utilised in a multitude of applications: such
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationRemote Oil Filter Mount
Remote Oil Filter Mount Part No. ENV-140 Made in USA Important: Read these instructions in their entirety prior to installation. Rev 170925 Parts List 1 x ENV-140 remote filter mount 1 x M22x1.50 oil filter
More informationComparison Chart. extremely difficult. Finally, separated components can rarely be re-used.
JAN 2014 Traditional Connections Why Go Keyless Keyed Bushing Systems Both QD and Taper-Lock bushing and weld-on hub systems are popular component mounting technologies. Yet both are ultimately keyed connections
More informationMade. Quality. Rugged. American
Quality Control for Safety s Sake Our quality control procedures define the entire manufacturing process and provide complete traceability from raw materials, tested in our metallurgical lab, to finished
More informationLIF TING SOLUTIONS. Lifting Solutions
Center Pull Style... 484-485 Envirolox Protective Finish... 494 Eye Bolts...500 Eye Nuts... 499 Forged Center Pull...487 488 Forged Center Pull Stainless Steel...486 Kwik-Lok Lifting Pin...495 496 Hold
More informationDetails of Special Threads
Details of Special Threads NS threads (Male) Male External Pitch Minor For 40 kn 1 1/2-16NS For 100 kn 2 1/4-14NS 38.1 57.15 84.14 37.06 55.97 82.76 36.15 54.92 81.54 For 200 kn 3 5/16-12NS Angle 60 NS
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
More informationDesign Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables)
TF 209-R-08 Metric Design Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables) INTRODUCTION This Tech Fact* provides basic information on coldworked wire and welded
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationSealing surface pressure and bolt force
Printed in Germany 04/06 39-00004-01 REINZ-Dichtungs-GmbH Reinzstraße 3-7 89233 Neu-Ulm Deutschland Phone +49(0) 731-7046-777 Fax +49(0) 731-7046-399 www.reinz.com Sealing surface pressure and bolt force
More informationBolt Tensioning Technology for Wind Turbines
Bolt Tensioning Technology for Wind Turbines www.torcup.com WTB Series Fully aware of the difficulties associated with wind turbine blade tensioning, the new TorcUP WTB Series is a purpose designed range
More informationStandard Product Range
Standard Product Range Standard Pressure onnection Nominal size inch Product code mm ASME 150/200 psi Wafer Lugged 1 150/200 DJ 1 150/200 DJL Standard Product Range EN PN10 PN16 PN25 Wafer Lugged Wafer
More informationDiaphragm Valves. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS 1117 Progressive Products from Spears Innovation and Technology
Features, & This full-featured valve is engineered to provide accurate throttling control and shutoff for industrial, chemical and water treatment applications. Weir-type design eliminates entrapped fluids
More informationPRODUCT NEW PRODUCT RANGE *PRICES OF ABOVE PRODUCTS ARE AVAILABLE ON REQUEST THE WORLD LEADER DURLOK BOLT DURLOK NUT UNBRAKO TENSION CONTROL BOLT
NEW PRODUCT RANGE PRODUCT DURLOK BOLT Property Class 2.9 Metric M To M20 Length 2mm To 00mm Size Range Inches - EQUIVALENT STANDARD AS PER UNBRAKO STANDARD DURLOK NUT 2 M To M20 - AS PER UNBRAKO STANDARD
More informationDatasheet. control line. e109 - September Manufacturing Range. Experience. Applications. Production Facilities
Datasheet Experience The Oil & Gas sector represents one of Fine Tubes principal markets for supply of a wide range of tubular product forms and materials. Our products have been successfully used in some
More informationMechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications
82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal
More informationHigh Pressure Design. Design Temperature F (65.6 C)
STAR Super Seal - API 15HR Design (Product Data) OIL & GAS MINING Applications Production Lines or Injection Lines Oil, Gas, Saltwater Transfer Lines or Disposal Lines CO 2 and Sour Services Pipeline Rehabilitation
More information*Attachment A 1 SCOPE 1.1 This Standard covers cast copper alloy: (a) threaded pipe flanges and blind flanges having rating class designations 150, 300, 600, 900, 1500, and 2500, (b) flanged fittings having
More information708 Series. Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES. CRN Registration Number Available
708 Series Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708 was developed by Jordan Valve to provide the most accurate control available for fractional
More informationThe product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.
Wheel gears... 3 Axial piston pumps... 3 Axial piston motors... 3 Winches... 4 Radial piston pumps... 4 Radial piston motors... 4 Slewing rings... 5 Gear pumps... 5 Gear flow dividers... 5 Cylinders...
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationNC Self-Clinching Nuts
NC Self-Clinching Nuts Features Provide load-bearing threads in thin sheets. vailable in a broad selection of inch and metric thread sizes. Self-clinching design provides quick and permanent installation
More informationBALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS LENGTH
BALL SCREW LINEAR ACTUATOR BSA 2 OVERALL DIMENSIONS Stroke La =Lc + Stroke Lc T Capacitor Rear bracket Pin SP Standard head with threaded hollow bore BA depth 7 Stroke end reed switches FCM (brake motor)
More informationPHARMACEUTICAL CLAMPS PRESSURE RATINGS (bar)
PRESSURE RATINGS CLAMP SIZE PRESSURE RATINGS (bar) Nominal Metric Max Working Pressure @ 150C Max Test Pressure Size Size S SH SSH ASME VIII S SH SSH ASME VIII 1/2"-3/4" - 25 50 75-50 100 150 - - DN 10-20
More informationiglidur G The General Purpose Bearing: most popular iglidur material worldwide
Standards Wide Range from Stock polymer bearings G The General Purpose Bearing: most popular material worldwide from page 51 J The Fast and Slow Motion Specialist: used in long-life applications, also
More informationHex Key Foldups Short Arm Hex Keys Long Arm Hex Keys Ball-Plus Hex Keys Ball-Plus Cushion Grip T-Handles 489
Hex Foldups... 485 Short Arm Hex s... 486 Long Arm Hex s... 487 Ball-Plus Hex s... 488 Ball-Plus Cushion Grip T-Handles 489 13 A L L E N H E X K E Y S 483 Hex s William G. Allen patented a cold drawing
More informationVAM SLIJ II TM The Semi-Flush connection from a name you trust
Integral connections VAM SLIJ II TM The Semi-Flush connection from a name you trust 2014 - Vallourec Oil and Gas France VAM SLIJ-II TM is a gas tight expanded box premium connection combining maximum external
More informationFusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit 71 I Fuse 105 Electrofusion Processor The IntegriFuse I Fuse 105 Electrofusion Processor is the next generation
More informationStandards / Verticals
Standards / Verticals SIZE WEIGHT Metric Imperial Metric Imperial Standard.5 m 1'8" 2.73 kg 6 lbs Standard 1 m 3'3" 5.0 kg 11 lbs Standard 1.5 m 4'11" 7.5 kg 16 lbs Standard 2 m 6'7" 9.5 kg 21 lbs Standard
More informationStyle 99 Roust-A-Bout Couplings
R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings
More informationBALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. MASS [Kg] STROKE T STROKE LENGTH STROKE LENGTH. standard brake CODE
BALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS BSA 10 AC motor Stroke La =Lc + Stroke Lc Capacitor T Rear bracket SP Pin Standard head with threaded hollow bore BA 80 depth 17 Stroke end reed switches FCM
More informationVIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
More informationButterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax:
Butterfly Valves Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: 519-759-3911 Tel: 800-563-6302 Fax: 519-759-7970 www.craneenergy.com A Crane Co. Company Butterfly Valves Ordering Information
More informationLOCKING BUSHES & SHAFT COLLARS
LOCKING BUSHES & SHAFT COLLARS INDEX TAPER BUSHES Page 3 WELD-ON HUBS Page 4 QD BUSHES Page 5 MECHANICAL LOCKING BUSHES CAL1 (Not Self-Centering) Page 6 CAL2 (Not Self-Centering) Page 7 CAL3 (Self-Centering)
More informationFull Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
More informationBOLT TIGHTENING SOLUTIONS
BOLT TIGHTENING SOLUTIONS We offer a complete and dynamic range of bolting We offer complete and dynamic range of bolting tools including tools including hydraulic bolt tensioners and hydraulic hydraulic
More informationDETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 30 September 2011 SUPERSEDING MS51844D 19 April 2007 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationFOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE PAGE 30
COLD ROLLED STEEL ROUND, SQUARE, FLAT, HEX AND S.S. ROUND, THREADED ROD 1018 COLD ROLLED STEEL ROUND 3 1/8 --- -- 101218 $.60 103618 $1.60 3/1 --- -- 1012316.65 1036316 1.75 1/4 --- -- 101214.95 103614
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
More informationDirectional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
More informationP.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
More informationDrilmax Steel Tubes. for the most demanding mining exploration drilling conditions
Drilmax Steel Tubes for the most demanding mining exploration drilling conditions Customer Benefits Drilmax steel tubes are cold drawn, heat-treated and straightened with the highest expertise to offer
More informationGS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
More informationCLARK SOLUTIONS 8E Series Electric Actuated NEMA 4X Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8E Series Electric Actuated NEMA 4X Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com MODEL SERIES 8E064/68 64: Direct mount 2-way brass full port
More informationCofferLok Clamp Connector
CofferLok Clamp Connector Taper-Lok and CofferLok Connection Systems Our process piping, pipeline, riser and exchanger connection systems provide the solutions to chronic problems associated with standard
More informationChampion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
More informationStainless Spring Steel Strip
Stainless Spring Steel Strip Tolerances according to DIN EN ISO 9445-2:2010-06 Chart 1 (fine tolerance) or as agreed Grade No.* Grade Name Standard Tensile Strength (Rm) Comparable 1.4301 X 5 CrNi 18-10
More informationCamcar Socket Screw Catalog
Camcar Socket Screw Catalog Effective April 1, 2017 Camcar Socket Screws Suior Socket Screw Products STANLEY Engineered Fastening is committed to offering a broad range of socket screw standard products
More informationBOCCOLE ERNESTO RAAB SRL
C A BOCCOLE T A L O G O NESTO RAAB SRL Via Ghisalba,3-2002 Ospiate di Bollate (MILANO) Tel.: 023830375 - Fax : 0238303207 http://www.ernestoraab.it e-mail: cuscinetti@ernestoraab.it Internal clearance
More informationEJC 430 TECHNICAL SPECIFICATION. Payload: 30 tons (27.3 tonnes) Dump box volume: 20.7 yd³ (15.3 m³) We are an ISO 9001 Registered Company EJC 430 1
EJC 430 1 EJC 430 TECHNICAL SPECIFICATION Payload: 30 tons (27.3 tonnes) Dump box volume:.7 yd³ (.3 m³) 02, EJC Loaders Division reserves the right to change this 2 EJC 430 General Arrangement 65 o 430
More informationVal-U-Act Ball Valve Operators. Air-Oil Systems, Inc.
Val-U-Act Ball Valve Operators Specifications: Class-Act (CL) Valve Operator (/4 /4 ) Double Acting Valve Operator Systems Valve Sizes from /4 to /4 48 in. lbs. to 80 in. lbs. As compared to other rotary
More informationCopyright 1999 Inter-Industry Conference On Auto Collision Repair v.4.0
Uniform Procedures For Collision Repair UPCR SP11S Frame Copyright 1999 Inter-Industry Conference On Auto Collision Repair v.4.0 1. Description This procedure describes the repair and complete or partial
More informationreliable actuators to
reliable actuators to & Fit Forget Pneumatic Rack & Pinion Actuators a new look Reliable As Ever 40 years of success and still delivering The EL-O-Matic F-Series actuator is the result of 40 years of production
More informationPressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
More informationConcrete ASTM COMPRESSION TESTER ACCESSORIES
ADR Advanced Digital Readout Menu-driven with simple data entry. Dual input and operating modes. Peak hold and auto stress calculation. RS232C output. Pace deviation bar graph for accurate load rate applications.
More information200 SERIES 220/280 SERIES. Planetary GEAR BOXES 500 SERIES CATALOG PGB SERIES 6000/10000 SERIES 2500/2520 SERIES
2 SERIES 22/28 SERIES Planetary GEAR BOXES 5 SERIES CATALOG PGB 616 SERIES 6/1 SERIES 25/252 SERIES PLANETARY GEAR BOXES INDEX SERIES MAXIMUM OUTPUT TORQUE LB-INCHES (N-M) CONTINUOUS/INTERMITTENT MAXIMUM
More informationHSC EC 11-USA DETAN ROD SYSTEMS DT 14-US FAÇADE
HSC EC DETAN 11-USA ROD SYSTEMS DT 14-US FAÇADE HALFEN DETAN Rod Systems. The most Trusted Name. The most Elegant Application. With DETAN, architectural visions become a structural reality. DETAN Rod Systems
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More information