Mazagon Dock Shipbuilders Ltd Corrigendum No. 01 to Tender No dated 12 Mar'18
|
|
|
- Barry Jennings
- 5 years ago
- Views:
Transcription
1 azagon Dock Shipbuilders Ltd Crigendum No. 01 to Tender No dated 12 ar'18 Crigendum No. 01 to Tender No (E-Tender ID: 2018_DL_72490_1) Item: Cupro Nickel And Gun etal Deck Bulkhead Fittings f P15B Ships Please refer to above mentioned tender hosted on DL e-ptal. 1. All prospective bidders are hereby infmed to note the change in tender terms and conditions as exhibited in the below table: Sr no Existing as per tender To be read as i Ranking Criteria Ranking Criteria Section-II, Cl. No. 4.a.(i) Section-II, Cl. No. 4.a.(i) Ranking of bids shall be done by considering following facts: Separate L1 will be Considered group-wise as under:. Ranking of bids shall be done by line wise L-1 f all 04 yards together i.e. L-1 shall be arrived wise as per the BOQ sheet ( which has 24 s) Group 1 :Straight type Bulkhead fittings (OC) as per drg no 106, 101, 102 f all 04 Ships of P15B together. Group 2 :Straight type Bulkhead fittings (OC) as per drg no 109, 101, 102 f all 04 Ships of P15B together. Group 3 : J type Bulkhead fittings (OC) as per drg no 108, 101, 102 f all 04 Ships of P15B together. Group 4 :Socket & centre flanged type Bulkhead fittings (OC) as per drg no 112, 101, 102 f all 04 Ships of P15B together. Group 5 :Screwed type Bulkhead fittings (OC) as per drg no 115, 101, 102 f all 04 Ships of P15B together. Group 6 :Screwed & Socket type Bulkhead fittings (OC) as per drg no 116, 101, 102 f all 04 Ships of P15B together. ii The Group column of BOQ in the tender is not applicable and to be igned since the ranking criteria is now wise instead of group wise. Bidder to submit price fmat with wds Quoted / Not Quoted in the technical Part-1 offer. iii. The following sub-para is added to Cl. No. 5.(a). of Section-III of the tender: The delivery period required by DL w.r.t. QAP approval is as follows: Yard No Delivery period required by DL from QAP approval Delivery period offered by bidders Y months from QAP approval Y months from QAP approval Y months from QAP approval Y- 07 months from QAP approval Page 1 of 2
2 azagon Dock Shipbuilders Ltd Crigendum No. 01 to Tender No dated 12 ar'18 iv. Cl. No. 11.(a). of Section-III of the tender to be read as follows: The equipment / along with associated auxiliaries/components supplied shall be warranted / guaranteed f satisfacty fmance f the period of 24 months from date of receipt in DL. (The table/matrix of delivery and warranty stands deleted) 2. Rest all the terms and conditions remain unchanged. F AZAGON DOCK SHIPBUILDERS LID Krishna P Adhikari SE(C - P15B) Page 2 of 2
3 BLANK RATE SHEET FOR TENDER (Cupro Nickel and Deck Bulkhead Fittings f P15B Ships) Note: 1) Bidders are requested to indicate "Quoted/ Not Quoted" as applicable against each line & upload this blank rate sheet along with Part1 of their offer 2) F details of Delivery Schedule, Please refer the Tender Enquiry fm attached with the Tender. 3) : Tender Enquiry Fm 4)The quantity f four is clubbed together. However the delivery will be staggered as below: (a)delivery Schedule f line Item No 100 to 1900 & 2000 to 3900 : 02 onths From QAP Approval (Y & Y-12705) (b) Delivery Schedule f line Item No 4000 to 5900 & 6000 to 8200 : 07 onths From QAP Approval (Y & Y-) Bidder Name ATERIAL DESCRIPTION ATERIAL contain is 1 DIENSION:-SUITABLE TO 40 NB PIPE (44.5 OD). FOR DETAILS: RER DL STANDARD DRAWING.106, 101 & S 100, 2000, 4000, DIENSION:-SUITABLE TO 50 NB PIPE (57 OD). FOR DETAILS: RER DL STANDARD DRAWING.106, 101 & S 200, 2100, 4100, DIENSION:-SUITABLE TO 80 NB PIPE (89 OD). FOR DETAILS: RER DL STANDARD DRAWING.106, 101 & S 300, 2300, 4300, DIENSION:-SUITABLE TO 100 NB PIPE (108 OD). FOR DETAILS: RER DL STANDARD DRAWING.106, 101 & S 400, 2400, 4400, DIENSION:-SUITABLE TO 125 NB PIPE (133 OD). FOR DETAILS: RER DL STANDARD DRAWING.106, 101 & S 500, 2500, 4500, 6500 Page 1 of 4
4 ATERIAL DESCRIPTION ATERIAL contain is DIENSION:-SUITABLE TO 150 NB PIPE (159 OD). FOR DETAILS: RER DL STANDARD DRAWING.106, 101 & DIENSION:-SUITABLE TO 65 NB PIPE (76 OD). FOR DETAILS: RER DL STANDARD DRAWING.106, 101 & ATERIAL: - COPPER & GUN ETAL DIENSION:-SUITABLE TO 40 NB PIPE (44.5 OD). FOR DETAILS: RER DL STANDARD DRAWING.109, 101 & ATERIAL: - COPPER & GUN ETAL DIENSION:-SUITABLE TO 50 NB PIPE (57 OD). FOR DETAILS: RER DL STANDARD DRAWING.109, 101 & ATERIAL: - COPPER & GUN ETAL DIENSION:-SUITABLE TO 65 NB PIPE (76 OD). FOR DETAILS: RER DL STANDARD DRAWING.109, 101 & ATERIAL: - COPPER & GUN ETAL DIENSION:-SUITABLE TO 100 NB PIPE (108 OD). FOR DETAILS: RER DL STANDARD DRAWING.109, 101 & DIENSION:-SUITABLE TO 50 NB PIPE (57 OD). FOR DETAILS: RER DL STANDARD DRAWING.108, 101 & S S S S S S S 600, , 4200, , 3300, 5000, , 3400, 5100, , 3500, 5200, , 3600, 5300, , 2700, 6600 Page 2 of 4
5 ATERIAL DESCRIPTION ATERIAL contain is DIENSION:-SUITABLE TO 65 NB PIPE (76 OD). FOR DETAILS: RER DL STANDARD DRAWING.108, 101 & DIENSION:-SUITABLE TO 80 NB PIPE (89 OD). FOR DETAILS: RER DL STANDARD DRAWING.108, 101 & DIENSION:-SUITABLE TO 100 NB PIPE (108 OD). FOR DETAILS: RER DL STANDARD DRAWING.108, 101 & DIENSION:-SUITABLE TO 125 NB PIPE (133 OD). FOR DETAILS: RER DL STANDARD DRAWING.108, 101 & DIENSION:-SUITABLE TO 150 NB PIPE (159 OD). FOR DETAILS: RER DL STANDARD DRAWING.108, 101 & DIENSION:-SUITABLE TO 200 NB PIPE (219 OD). FOR DETAILS: RER DL STANDARD DRAWING.108, 101 & ATERIAL: - AL.BRASS DIENSION:-SUITABLE TO 8 NB (12 OD) 90/10CUNI & COPPER PIPE. FOR DETAILS: RER DL STANDARD DRAWING.112, 101 & S S S S S 800, 2800, 4600, , 2900, , 3000, 4700, , 3100, 4800, , 3200, 4900, S S 1700, 3700, 5400, 7700 Page 3 of 4
6 ATERIAL DESCRIPTION ATERIAL contain is ATERIAL: - AL.BRASS DIENSION:-SUITABLE TO 10 NB (16 OD) 90/10CUNI & COPPER PIPE. FOR DETAILS: RER DL STANDARD DRAWING.112, 101 & ATERIAL: - AL.BRASS DIENSION:-SUITABLE TO 20 NB (25 OD) 90/10CUNI & COPPER PIPE. FOR DETAILS: RER DL STANDARD DRAWING.112, 101 & ATERIAL: - AL.BRASS DIENSION:-SUITABLE TO 25 NB (30 OD) 90/10CUNI & COPPER PIPE. FOR DETAILS: RER DL STANDARD DRAWING.112, 101 & DECK /BULKHEAD FITTING: -SOCKET & CENTRE FLANGE TYPE FOR CHILLED WATER PIPES ATERIAL: - GUN ETAL & AL. BRASS DIENSION:-SUITABLE TO 32 NB PIPE (38 OD) CONSTRUCTION: - BOTH END TAIL PIECE & CENTER PAD TYPE FOR DETAILS: RER DL STANDARD DRAWING.115, 101 & DECK /BULKHEAD FITTING: -SCREWED & SOCKET TYPE FOR CHILLED WATER PIPES ATERIAL: - AL. BRASS DIENSION:-SUITABLE TO 25 NB PIPE FOR DETAILS: RER DL STANDARD DRAWING.116, 101 & Note: This fm, duly filled and to be uploaded along with part-i: Techno-commercial bid. Against each, the bidder has to indicate whether the price is 'Quoted' 'Not Quoted' by the bidder. The actual to be in the online BOQ (price bid) only S S S S S 5500, , , , 3800, 5800, , 3900, 5900, 8200 Page 4 of 4
NLC INDIA LIMITED (formerly Neyveli Lignite Corporation Limited) ('NAVARATNA'-Government of India Enterprise) MATERIALS MANAGEMENT COMPLEX
/TENDER ENQUIRY NO :ENQ/18-19/002477/MM05(03) /DATE :12/09/2018 /Page - 1 Due Date of Cover-I Opening : 27/09/2018 11:00:00 hrs. IST (Check NLC eproc website for any change in due date of opening.) Note
TECHNICAL BID T 3610
TECHNICAL BID T 3610 Supply of Various Rubber Items at GSECL TPS Ukai. Due on At 3.30 P.M. (if Possible) EMD paid YES / NO EMD D. D. No. Date : OR SSI / NSIC Certification Number : Duly Notarized : YES
MAHARASHTRA NATURAL GAS LIMITED
Replies to Queries of the Bidders Date: 15.09.2018 SUB: Replies to queries of the bidders against Tender for Procurement of Natural Gas RPD & Turbine Meters with EVC for CGD Network of MNGL, Pune REF:
BHARAT HEAVY ELECTRICALS LIMITED Industrial Valves Plant Goindwal (AMRITSAR) Enquiry Date:
BHARAT HEAVY ELECTRICALS LIMITED Industrial Valves Plant Goindwal 143422 (AMRITSAR) ENQUIRY Phone:+91 1859 223381 (+91 1859 222002, 222036, 222039 Extn 117) Fax :+91 1859 222 061 Email :srk@ivp.bhel.co.in
STORES/EASTERN RLY Tender Document For Tender No : Due Date/Time: 14/03/ :30
STORES/EASTERN RLY, for & on behalf of The President of India, Invites electronic tenders for the following items. Tender No : 04156049 Evaluation Criteria : Total Value Wise Tender Doc. Cost (INR) : 2500.00
VOLUME -III TECHNICAL SPECIFICATION FOR MISCELLANEOUS PUMPS (HORIZONTAL)
1 X 500 MW FEROZE GANDHI UNCHAHAR THERMAL POWER PROJECT STAGE-IV VOLUME -III TECHNICAL SPECIFICATION FOR MISCELLANEOUS PUMPS (HORIZONTAL) Specification No. : PE-TS-401-100-N001 (REV. 0) BHARAT HEAVY ELECTRICALS
SECTION 1 SCOPE, SPECIFIC TECHNICAL REQUIREMENT AND QUANTITIES
Tamil Nadu Transmission Corporation Limited Bharat Heavy Electricals Limited 400/110 KV Substation at Thappagundu & 400/230-110 KV Substation at Anikadavu, Technical specification for 420/245/132kV Isolators
CORRIGENDUM/ ADDENDUM 09 ADDITIONAL REQUIREMENT OF ELEVATOR.
AMENDMENT-02 TO TECHNICAL SPECIFICATION FOR ELEVATOR (SPEC NO. PE-TS-408-502-A001) 1x800 MW WANAKBORI STPP. CORRIGENDUM/ ADDENDUM 09 ADDITIONAL REQUIREMENT OF ELEVATOR. CL. NO. 2.0 Scope of equipment supply
TECHNICAL BID T 3627
TECHNICAL BID T 3627 Supply of Mechanical Measuring Instruments for TMD-II OF UKAI TPS. Due on At 3.30 P.M. (if Possible) EMD paid YES / NO EMD D. D. No. Date : OR SSI / NSIC Certification Number : Duly
GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED SARDAR PATEL VIDYUT BHAVAN RACE COURSE, VADODARA TENDER FOR
GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED SARDAR PATEL VIDYUT BHAVAN RACE COURSE, VADODARA - 390 007 TENDER FOR Design,Engineering, manufacturing, supply, erection, testing & commissioning of 66
CORRIGENDUM # 1. Rate Cotnract for Hiring ofvehicle for CNG, PNG and Other Activities TENDER NO: IGL/ND/C&P/CM15118
CORRIGENDUM # Rate Cotnract for Hiring ofvehicle for CNG, PNG and Other Activities TENDER NO: IGL/ND/C&P/CM8 Sr. No. Description Clause/ Para/ Section Amendment/Addition/Modification/Deletion Comemrcial
Supply of Batteries
Supply of Batteries 207-8 SUPPLY OF BATTERIES OF VARIOUS RATINGS E-PROCUREMENT (REVERSE AUCTION) NIT No: 07/ 207-8 Name of the work Supply of Batteries to our Branches / Offices /ATM Completion Time EMD
TECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE
TECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE The hardware fittings suitable for tension string to be used for 11KV consisting of following
Solar Energy Corporation of India New Delhi-17
Solar Energy Corporation of India New Delhi-7 : SECI/Cont./SRT-IV-P/7/0/ Date: 6-07-0 Subject: tification of L bidders of different States in Part-A and for price matching by L, L,L.and so on..0 The Request
GUJARAT STATE ROAD TRANSPORT CORPORATION ON LINE E-TENDER NOTICE
GUJARAT STATE ROAD TRANSPORT CORPORATION ON LINE E-TENDER NOTICE GSRTC invites online open tender with reverse auction for purchase of Diesel Chassis BS-III, Sleeper Coach Chassis BS-III (Pre bid discussion
Open Tender Enquiry OUTSOURCING OF PHOTOCOPY WORK AT SCOOTERS INDIA LIMITED SINGLE BID SYSTEM. SCOOTERS INDIA LIMITED Page 1
Open Tender Enquiry OUTSOURCING OF PHOTOCOPY WORK AT SCOOTERS INDIA LIMITED SINGLE BID SYSTEM SCOOTERS INDIA LIMITED Page 1 THIS PAGE INTENTIONALLY LEFT BLANK SCOOTERS INDIA LIMITED Page 2 SCOOTERS INDIA
ADDENDUM 02. To All Bidders:
ADDENDUM 02 Project: 2017 Water Truck Request for Tender Addendum: A-02 Location: 117 7 Avenue SE, Drumheller, Alberta Date: October 11, 2017 To All Bidders: 1. General 1.1. This addendum shall be read
SUPPLY OF HYDRAULIC AERIAL LADDER PLATFORM
Page 1 of 13 SUPPLY OF HYDRAULIC AERIAL LADDER PLATFORM Sr. Name of firm No 1 NK Fire and Safety GIDC phase 1,opp. Anand Tiles, Wadhwan Dist. Surendranagar Gujarat Tender clause ref./tender Terms/Specifications
Town of Marystown. Tender For. One New 4x4 Two (2) Door Cab Chassis (19,500 KG GVWR) With 12Ft Flat Deck
Town of Marystown Tender For One New 4x4 Two (2) Door Cab Chassis (19,500 KG GVWR) With 12Ft Flat Deck GENERAL SPECIFICATIONS Tenders are invited for the supply and delivery of One New 4x4 Two (2) Door
CHAINSA JHAJJAR BAMNOULI PIPELINE PROJECT TENDER FOR SCRAPER LAUNCHER/RECEIVER CLARIFICATIONS TO BIDDERS QUERIES
TENDER FOR SCRAPER LAUNCHER/RECEIVER CLARIFICATIONS TO BIDDERS QUERIES DATE: 21.07.2008 Sr. No. 1 2 3 4 Section / Clause No. Technical specification (Clause no: 5.2) Data sheet Technical specification
TECHNICAL SPECIFICATIONS FOR 11KV AIR BREAK (A.B.) SWITCHES :
TECHNICAL SPECIFICATIONS FOR 11KV AIR BREAK (A.B.) SWITCHES : 1. SCOPE : This specification covers design, manufacturing, testing at manufacturer s works, inspection, packing & delivery of 11 KV Air Break
CITY OF TACOMA ENVIRONMENTAL SERVICES DEPARTMENT
CITY OF TACOMA ENVIRONMENTAL SERVICES DEPARTMENT ADDENDUM NO. 2 DATE: March 30, 2017 REVISIONS TO: Request for Bids Specification No. ES17-0020F METAL SOLID WASTE AND RECYCLING CONTAINERS NOTICE TO ALL
HARYANA POWER GENERATION CORPORATION LIMITED Regd. Office C-7, Urja Bhawan, Sector-6, Panchkula Corporate Identity Number: U45207HR1997SGC033517
HARYANA POWER GENERATION CORPORATION LIMITED Regd. Office C-7, Urja Bhawan, Sector-6, Panchkula Corporate Identity Number: U45207HR1997SGC033517 Website: www.hpgcl.org.in E-mail- ceplg@hpgcl.org.in EXPRESSION
ii) PC based works station with monitor and printer having below mentioned specifications:
GAS CHROMATOGRAPH ANNEXURE-A Gas with TCD,FID & Methanizer as below for NFL Bhatinda, Panipat & Nangal Unit (one each): i)gas customized & factory fitted capable of concurrent (parallel) operations of
TECHNICAL SPECIFICATION FOR 11 KV AIR BREAK (A.B.) SWITCHES:
TECHNICAL SPECIFICATION FOR 11 KV AIR BREAK (A.B.) SWITCHES: 1. SCOPE : This specification covers design, manufacturing, testing at manufacturer s works, inspection, packing & delivery of 11 KV Air Break
Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT
An ISO 9001 Company (High Pressure Boiler Plant) Tiruchirappalli 620014, TAMIL NADU, INDIA CAPITAL EQUIPMENT / MATERIALS MANAGEMENT ENQUIRY NOTICE INVITING TENDER Phone: +91 431 257 79 38 Fax : +91 431
ANNE ARUNDEL COUNTY, MARYLAND Annapolis, Maryland ADDENDUM NO. 4 June 8, 2017
ANNE ARUNDEL COUNTY, MARYLAND Annapolis, Maryland ADDENDUM NO. 4 June 8, 2017 TO ALL BIDDERS: Please see the following for the above-mentioned IFB: 1. Q: The Bid Response Form shows a column for estimated
SPECIFICATION FOR HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV/22KV LINE
SPECIFICATION FOR HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV/22KV LINE The hardware fittings suitable for tension string to be used for 11KV / 22 KV consisting of following components.
1. Do the two Gillig 40 (2401H & 2402H) Hybrid have batteries, if so, what type? IPTC Response: Yes, I believe phosphate.
October 6, 2017 To: All Vendors of Record Re: Addendum #1 All vendors are to accept the information contained herein as the official response of IPTC. TO ALL BIDDERS OF RECORD AND TO WHOM IT MAY CONCERN:
SPECIFICATIONS FOR MOTOR OPERATED VALVES
Doc No: 254625-300-SP-INT-004 Rev: B Page 1 of 11 SPECIFICATIONS FOR MOTOR OPERATED VALVES Hindustan Petroleum Corporation Ltd Visakha Dispatch Station VR-ATP Area, Naval Base Post Visakhapatnam - 530
Section VI: List of Requirements (REVISED)
As per Technical Specifications attached in Section VII Date: 18/06/2018 of Electrical Items With reference to the above tender, the following Corrigendum may kindly be noted against the Section VI, Section
Hydraulic Fittings. Design, Manufacture, Distribution
Hydraulic Fittings Design, Manufacture, Distribution Hydraulic Fittings are exclusively distributed by Beaumanor Engineering Ltd of Leicester and manufactured by Balu Auto Components of Chennai India,
TECHNICAL BID. T 4401 (E-Tender I.D. No. ) Subject: Supply of water valves for Cooling water System of Unit No.3, 4&5 for TMD-II Section at TPS Ukai.
GUJARAT STATE ELECTRICITY CORPORATION LIMITED Ukai Dam, Taluka: Fort Songadh, Dist:Tapi 394680. Ph. 91-2624-233215, 233257 Fax: 91-2624-233300, 233315.e-mail: ukaitps@gebmail.com. Website: www.gsecl.in
COUNTY OF BERKS Purchasing Department Berks County Services Center, 633 Court Street, Reading, PA Tel: Fax:
COUNTY OF BERKS Purchasing Department Berks County Services Center, 633 Court Street, Reading, PA 19601 Tel: 610-478-6168 Fax: 610-478-6206 Kelly A. Laubach, Purchasing Manager NOTICE TO BIDDERS Amendment
S.No. Tender Queries BRPL Reply 1 For 11KV(E) 3Cx300sqmm A2XWY High Ampacity cable conductor details specification not
S.No. Tender Queries BRPL Reply 1 For 11KV(E) 3Cx300sqmm A2XWY High Ampacity cable conductor details specification not clear.please provide Specification for High ampacity HT Cable with Trapezoidal wire
BID SPECIFICATIONS FOR 16 STEEL DUMP BODY OPTION C (AUTOMATIC TRANSMISSION) WARREN WXL-16 $17, (INCLUDING OPTIONS)
BID SPECIFICATIONS FOR 16 STEEL DUMP BODY OPTION C (AUTOMATIC TRANSMISSION) WARREN WXL-16 $17,836.00 (INCLUDING OPTIONS) GENERAL These specifications shall be construed as the minimum acceptable standards
CITY OF ALHAMBRA NOTICE INVITING BIDS NO. N2M16-144
CITY OF ALHAMBRA NOTICE INVITING BIDS NO. N2M16-144 PUBLIC NOTICE IS HEREBY GIVEN that the City of Alhambra will receive sealed bids on or before the hour of 10:30 AM on Thursday, October 27 2016, at the
From: Arthur Canafe, P.E. Approved by: /s/ General Manager
AGENDA ITEM : 3.F.1 MEETING DATE: 05/17/2010 ADMINISTRATIVE REPORT : 2010-64 To: Honorable Public Utilities Board Submitted by: /s/ Robert Streich AGM Engineering and Operations From: Arthur Canafe, P.E.
CORRIGENDUM - II. Sr.No. Price Break Up ---- Rate For item No.-1 to item No.-19.
CORRIGENDUM - II No. 6000003469/M.E.03/ Dated : 28/03/2014 Ref: Tender Enquiry No. 6000003469/M.E.03/2235 data 18.12.2013 Against our above tender enquiry was published in the http://spmhoshangabad.spmcil.com
SPECIFICATIONS OF Ni-Cd BATTERY BANK
SPECIFICATIONS OF Ni-Cd BATTERY BANK ANNEXURE-Z Supply, Installation and commissioning of Ni-cd battery bank for high rate of discharge type KPH 125V 210 AH consisting of 103 number of cells. Detail technical
Failure to comply with any of the instructions may be cause for the County to reject that bid.
Instructions to Bidders It is the purpose of this document to solicit bids for the County of Ashtabula, Ohio (herein referred to as the County) from vendors interested in providing a new steel compactor
IMPORTANT NOTE (C) SENIOR ADVISER(CONTRACT & PURCHASE), OIL INDIA LIMITED, PLOT NO. 19 SECTOR 16A NOIDA
IMPORTANT NOTE BID DOCUMENT HAS BEEN DISPLAYED TO UNDERSTAND THE REQUIREMENT ONLY. PARTIES INTERESTED TO PARTICIPATE AGAINST THIS TENDER SHALL HAVE TO PURCHASE THE TENDER DOCUMENTS FROM ANY OF OIL S DESIGNATED
Spearhead TWIGA. TWIGA Reach Mower 545 / 595 / 640T. Edition 1.1 April 2014 Part No
TWIGA Reach Mower 545 / 595 / 640T Edition 1.1 April 2014 Part No. 8999016 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 Tank Lid 8 Rear Panel 10 Slew Post 12 Lift Frame 14 Main Arm 16 Dipper Arm 18
NLC INDIA LIMITED (formerly Neyveli Lignite Corporation Limited) ('NAVARATNA'-Government of India Enterprise) MATERIALS MANAGEMENT COMPLEX
NLC INDIA LIMITED (formerly Neyveli Lignite Corporation Limited) ('NAVARATNA'-Government of India Enterprise) MATERIALS MANAGEMENT COMPLEX Dr. Rajendra Prasad Road,Block-27,Neyveli-607807.Tamilnadu,India.
Numatic International Spare Parts Model No: Numatic International Spare Parts Model No: NB: FOR WIRING SEE DRAWING: DRW-7279
TTB 0 BASE ASSEMBLY EXPLODED DRAWING NB: FOR WIRING SEE DRAWING: DRW- 0 0 0 0 0 0 0 0 0 0 0 DRAWING: DRW-0 ISS:A0 /0/0 0 TTB 0 BASE ASSEMBLY EXPLODED DRAWING TTB 0 CHASSIS WELDED ASSEMBLY 0 TTB 0 HANDLE
TENDER FOR FOR 2 X 1010 KVA, 1500 RPM, 415 V DG SETS FOR CONSTRUCTION OF NEW CDRI CAMPUS AT SITAPUR ROAD, LUCKNOW (U.P.) SUMMARY OF PRICE BID
TENDER FOR FOR 2 X 1010 KVA, 1500 RPM, 415 V DG SETS FOR CONSTRUCTION OF NEW CDRI CAMPUS AT SITAPUR ROAD, LUCKNOW (U.P.) SUMMARY OF PRICE BID S.NO. HEAD DESCRIPTION AMOUNT (Rs.) 1 A DG SETS & ACCESSORIES
SURAT SMARTCITY DEVELOPMENT LTD (SSCDL)
SURAT SMARTCIT DEVELOPMENT LTD (SSCDL) Name of Work :- Selection of service Provider for Procurement, Supply, Integration and Maintenance of various Components for Intelligent Transit Management System
SAN ANTONIO WATER SYSTEM PURCHASING DEPARTMENT
SAN ANTONIO WATER SYSTEM PURCHASING DEPARTMENT Issued By: Joseph Ramon Date Issued: July 29, 2014 BID NO.: 14-5053 FORMAL INVITATION FOR BIDS ANNUAL CONTRACT FOR PUMP REPAIRS SUBMERSIBLE TRAINS AND CENTRIFUGAL
INDIAN INSTITUTE OF TECHNOLOGY KANPUR Kanpur , Uttar Pradesh, India Centre for Lasers and Photonics
INDIAN INSTITUTE OF TECHNOLOGY KANPUR Kanpur 208016, Uttar Pradesh, India Centre for Lasers and Photonics Enquiry no.: CELP/RV/EQP/MHR/2017/1 Enquiry date: 23/04/2018 Closing date: 17/05/2018 Sealed quotations
RFP Corrigendum No. 01
RFP Corrigendum 01 The RFP document for selection of Transmission Service provider for the Package- 1 against tender specification ESD-765/4 has been modified to the extent below: S. Clause / Page 1. Definition
TENDER. Enq. No. IIITMK/ 0648/18 Date: 07/09/18 Due on:17/09/20183pm
TENDER Enq. No. IIITMK/ 0648/18 Date: 07/09/18 Due on:17/09/20183pm On behalf of INDIAN INSTITUTE OF INFORMATION TECHNOLOGY & MANAGEMENT KERALA (IIITMK), the Registrar invites offers for supply and laying
INVITATION FOR QUOTATION. TEQIP-III/2018/ntst/Shopping/35
INVITATION FOR QUOTATION TEQIP-III/2018/ntst/Shopping/35 29-Dec-2018 To, Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the
BaartaIya iva&aana isaxaa EvaM AnausaMDaana samstaana paunao
BaartaIya iva&aana isaxaa EvaM AnausaMDaana samstaana paunao INDIAN INSTITUTE OF SCIENCE EDUCATION AND RESEARCH PUNE Dr. Homi Bhabha Road, Pune : 411 008 Date: December 21, 2015 TENDER FOR TRANSPORT SERVICES
Carbide Burs - Double Cut - Aluminium Cut - Comprehensive range of shapes to suit your application - Standard & extra length available - Sets &
CARBIDE BUR Carbide Burs - - Aluminium Cut - Comprehensive range of shapes to suit your application - tandard & extra length available - ets & merchandisers Carbide Burs Finder IO VDI aterial Group utton
THE TOWN OF CLARENVILLE PUBLIC WORKS DEPARTMENT. Tender Specification # For Purchase of One (1), New Wheel Loader with Snow Blades
THE TOWN OF CLARENVILLE PUBLIC WORKS DEPARTMENT Tender Specification # 03-2015 For Purchase of One (1), New Wheel Loader with Snow Blades GENERAL SPECIFICATIONS Tenders are invited for the supply and delivery
From a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
NIT No. DEERS/SSDI-JK/05 of 2018 Dated 29/08/2018 E-Tender id No: 2018_FD_ 60565
1 Phone/Fax: 0194-2494585 Government of Jammu & Kashmir, Department of Environment and Remote Sensing, SDA Housing Colony, Bemina, Srinagar, Kashmir-190018 Website: www.jkdears.com Email:dirjkers@gmail.com
Oil India Limited (A Govt. of India Enterprise) P.O. Duliajan , Assam
Oil India Limited (A Govt. of India Enterprise) P.O. Duliajan 786602, Assam Tender No. & Date: SDG 1468P17/07 dated: 14.06.2016 Tender Fee : INR 6,000.00 OR USD 100.00 Bid Security Amount : INR 105,340.00
Sl No. Details UOM Quantity. Delivery Schedule. Specification. Delivery Schedule. Delivery Schedule
Due Date of Cover-I Opening : 27/05/2016 15:00:00 hrs. IST (Check NLC eproc website for any change in due date of opening.) Note : Quotation should be valid for 60 days from the date of opening. Gentlemen,
Technical Specification of 11KV 200Amp. (3-Pole/2-Pole) Air Break Switch Scope Description of the materials Standards Insulator make
Technical Specification of 11KV 200Amp. (3-Pole/2-Pole) Air Break Switch 1. Scope:- This specification covers manufacturing, testing and supply of 11KV 200Amp. 50Hz Air Break switches for outdoor installation
Applicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
BID SPECIFICATIONS FOR 16 STEEL DUMP BODY OPTION B (MANUAL TRANSMISSION) OX BODIES/16 STAMPEDE $24, (INCLUDING OPTIONS)
BID SPECIFICATIONS FOR 16 STEEL DUMP BODY OPTION B (MANUAL TRANSMISSION) OX BODIES/16 STAMPEDE $24,712.00 (INCLUDING OPTIONS) GENERAL These specifications shall be construed as the minimum acceptable standards
TENDER DOCUMENT. for SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF KITCHEN EQUIPMENT AT. Single-Stage: Two-Envelope.
Vol II BoQ1 STATE INSTITUTE OF HOTEL MANAGEMENT AND CATERING TECHNOLOGY (JOINTLY SPONSORED BY GOVT. OF INDIA & GOVT. OF TAMILNADU) THUVAKUDI, TIRUCHIRAPPALLI- 620 015. TENDER DOCUMENT for SUPPLY, INSTALLATION,
NOCK/PRC/03(1218)2016-
Page 1 of 5 Please refer to Tender for Supply Installation and Commissioning of Chip Based Fuel Management Solutions - REF No. NOCK/PRC/03(1218)2016- advertised on Thursday, 2 nd March. We hereby issue
Petition No. 1051, 1054 & 1055 of 2015 BEFORE THE UTTAR PRADESH ELECTRICITY REGULATORY COMMISSION LUCKNOW Date of Order :
Petition No. 1051, 1054 & 1055 of 2015 BEFORE THE UTTAR PRADESH ELECTRICITY REGULATORY COMMISSION LUCKNOW Date of Order : 07.01.2016 PRESENT: 1. Hon ble Sri Desh Deepak Verma, Chairman 2. Hon ble Sri Indu
Section V DC Nickel Cadmium Alkaline BATTERY
Section - 7 TECHNICAL SPECIFICATION OF 110V DC Nickel Cadmium Alkaline BATTERY TECHNICAL SPECIFICATIONS & REQUIREMENTS OF 110V DC Nickel Cadmium Alkaline Battery 7. 1 GENERAL This section of the document
Technical Specifications
LT Distribution Box Technical Specifications 1. SCOPE 1.1 This specification covers design, manufacture, testing at manufacturer works before dispatch and supply of L.T. Distribution Cabinet suitable for
SPECIFICATION FOR REWIRABLE FUSES (KITKAT FUSES) 100A & 200A SPECIFICATION NO.: DIST/ A- KIT /
SPECIFICATION FOR REWIRABLE FUSES (KITKAT FUSES) 100A & 200A SPECIFICATION NO.: DIST/ A- KIT / 2005-06 SR.NO ITEM PAGE 1. SCOPE 2 2. WEATHER CONDITIONS 2 3. RATED VOLTAGE & FREQUENCY 2 4. GENERAL REQUIREMENT
INVITATION FOR QUOTATION. TEQIP-III/2018/gcej/Shopping/50
INVITATION FOR QUOTATION TEQIP-III/2018/gcej/Shopping/50 15-Sep-2018 To, Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the
City of Glasgow Department of Public Works Purchase of (1) 2013 White Rear Load Garbage Truck
City of Glasgow Department of Public Works Purchase of (1) 2013 White Rear Load Garbage Truck To: All Interested Bidders Subject: 2013 (1) White Rear Load Garbage Truck Attached are specifications for
INVITATION TO BID. (This is not an order.)
Page 1 of 5 SCHEDULE OF EVENTS Event Description 1 / 1 8 inch complete internal diaphragm disc assembly for 100-01 Event Date 8 inch complete internal diaphragm disc assembly for 100-01 No substitutes.
Clarifications Note 2 ITB GP
Clarifications Note 2 ITB GP 600409 1. In the scope of works (SoW) described in chapter 3.a.3. (section 3) is not clear if during the present bidding phase, is necessary to consider also: installation,
FIJI ELECTRICITY AUTHORITY
FIJI ELECTRICITY AUTHORITY TENDER SPECIFICATIONS TENDER TENDER NO: MR 73/2017 Design, Supply, Installation & Commissioning of Cooling System for Ruston 12RK270 at FEA s Labasa Power Station Scope of Works
INDUSTRIAL PIPE SUPPORTS CATALOGUE
INDUSTRIAL PIPE SUPPORTS CATALOGUE DATE PUBLISHED: 1/06/2017 BINDER GROUP INDUSTRIAL PIPE SUPPORT CATALOGUE TABLE OF CONTENTS 1. INTRODUCTION... 4 2. QUALITY MANAGEMENT CERTIFICATE... 5 3. PIPE SUPPORT
S P E C I F I C A T I O N
T E N D E R S P E C I F I C A T I O N NO: BHE/PW/PUR/KKT-ELE/627 FOR HANDLING AT SITE STORES/STORAGE YARD, TRANSPORTATION TO SITE OF WORK, COMPLETE ERECTION, CHECKING OF CALIBRATION, TESTING, COMMISSIONING
TECHNICAL SPECIFICATION
SECTION - III TECHNICAL SPECIFICATION OF AB SWITCH & HG FUSE NESCO : TN/ 17427/14.11.11-1 - 1. 33 KV 200 Amp 3 Pole HG Fuse (Horizontal Mounting Type) Quantity 15 Sets Technical Specification 1. SCOPE:
SPECIFICATIONS OF REWIRABLE KIT KAT FUSES
SPECIFICATIONS OF REWIRABLE KIT KAT FUSES 1. SCOPE: This application cover the manufacture, testing at works and supply of porcelain rewire able kit kat fuses suitable for AC 3 phase 415 V 50 HZ solidly
TECHNICAL BID. T (E-Tender I.D. No. )
TECHNICAL BID T - 3854 (E-Tender I.D. No. ) Subject : Supply of various Type of valves for GSECL UKAI TPS. Due on Date : At 3.30 P.M. (if Possible) EMD paid YES / NO EMD D. D. No. Date : OR SSI / NSIC
Parts Manual HLF 2500, 3000, 4000 & 5000 lb. Capacity Flipaway Liftgates
www.waltco.com Phone: 800.4.5685 parts@waltco.com Fax: 800.4.5684 Parts Manual HLF 500, 3000, 4000 & 5000 lb. Capacity Flipaway Liftgates EO:7 Rev 7 This manual identifies parts for Liftgates manufactured:
Valve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
Rate (Rs.) in figure. Rate (Rs.) in words. VAT (%) Amount (Rs.) & all other taxes.
PRICE FORMAT FOR SUPPLY OF ELECTRICAL ITEMS PART B PRICE BID TITLE: PROCUREMENT OF ELECTRICAL ITEMS IN BHEL TOWNSHIP, SECTOR 17, NOIDA NIT NO: 08:AA:NOI:ADMN:Electrical Items :112:2013 14 Dated 02/08/2013
TCN 01. Ref: PSER:FEX:12-13:TPT:10:TCN-01 Date:
TCN 01 Ref: PSER:FEX:12-13:TPT:10:TCN-01 Date: 28-02-2013 Sub Tender change notice (TCN) 01. Job Transportation of 1no. Liebherr make LR1600/2, 600MT Hydraulic Crawler Crane with 96M Boom, 24M Jib along
To Date: 23/03/2017. Respective Bidders,
To Date: 23/03/2017 Respective Bidders, Sub: Up-gradation, Operation and Maintenance of Street Lights in Navi Mumbai in Lieu of Rights of Sharing Energy Savings and Advertisement Rights on Public-Private-Partnership
Build the future, prepare for LNG
LNG Liquefied Natural Gas is the efficient new green fuel Build the future, prepare for LNG Manufacturing safe and innovative quality products Your LNG partner: LNG Vent Connections Male Quick Disconnect
Tender Enquiry No: BCL / PUR / ARC / AC&DC Motors/ CW / 2019 Dated: Due on:
MINISTRY OF RAILWAYS HEAD OFF. & REGD. OFF. : 5, HIDE ROAD, KOLKATA 700 043 TEL: +91 33 2439-7415, 2439-4114, 2439-6613, 2439-7413, FAX: +9133 2439 7632/ 5607 E-mail: purchase@braithwaiteindia.com Website:
Applicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material
Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases
PRICE BID - PART: I I
T E N D E R S P E C I F I C A T I O N NO: BHE/PW/PUR/PLT-ELE/603 FOR HANDLING AT SITE STORES/STORAGE YARD, TRANSPORTATION TO SITE OF WORK, COMPLETE ERECTION, CHECKING OF CALIBRATION, TESTING, COMMISSIONING
MPS 1-L Manual Powder System with the PG 1 Powder Gun
bar... 0. m /h 00 00 90 90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 kv µa E Operating Instructions and Spare Parts List MPS -L Manual Powder System with the PG Powder Gun 0 0 + m /h Issued 0/9 MPS -L / PG An ITW
: Material Description Quantity UOM
Page : 1 / 6 OIL INDIA LIMITED (A Govt. Of India Enterprise) Tel :033 2230 1657, 1658 4, India Exchange Place, Fax :91 33 2230 2596 Kolkata-700001 E-mail :oilcalmn@cal2.vsnl.net.in ANNEXURE-I Item No./
Control Components Pty Ltd. PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 (0) fx: +61 (0)
ABN 24 8 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 ()2 9542 8977 fx: +61 ()2 9542 7978 www.controlcomponents.com.au Magnetic Visual Level Indicators made in Australia under licence
Digital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
Control Components Pty Ltd. Drawing Number. Indicator Model Overview A 66.01A Side flanged connection
ABN 24 8 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 ()2 9542 8977 fx: +61 ()2 9542 7978 www.controlcomponents.com.au HELP@controlcomponents.com.au Magnetic Visual Level Indicators made
INDIAN MARITIME UNIVERSITY KOLKATA CAMPUS
INDIAN MARITIME UNIVERSITY KOLKATA CAMPUS No. IMU-KC/Laboratory Equipment/16-17 Date: 17.02.2017 Sub: Quotation for procurement of Instruments for Electrical Machine Laboratory at IMU-Kolkata Campus Sealed
INVITATION FOR QUOTATION. TEQIP-III/2018/mmug/Shopping/29 To,
INVITATION FOR QUOTATION TEQIP-III/2018/mmug/Shopping/29 To, 04-July-2018 Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the
Material Description Quantity UOM. 50 mm (2 Inch) NB, ANSI 1500 CLASS Control Valves for Oil Field (Sweet) Natural Gas Services:
Page : 1 / 5 OIL INDIA LIMITED (A Govt. of India Enterprise) P.O. Duliajan-786602, Assam. Fax No. 91-374-2800533, E-mail:material@oilindia.in Tender No. & Date : DFD4576L15/07 12.08.2014 Bid Security Amount
NIT No.:-10/WEX/MCR/HYD. PRESS/2-303/ /Dt
Annexure-1 NIT No.:-/WEX/MCR/HYD. PRESS/2-303/21-12/Dt.02.03.22 Name of work:-retrofitting of new hydraulic power pack on 63 Ton Hydraulic Press, Plan No.1/2-303 SCOPE OF SUPPLY AND WORK: 1.0 Purpose of
Spearhead TWIGA. TWIGA Reach Mower 555/600/655T 555FR/600FR. Edition 2.0 March 2011 Part No
TWIGA Reach Mower 555/600/655T 555FR/600FR Edition 2.0 March 2011 Part No. 8999057 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 Slew Post 8 Lift Frame 10 Tank Lid 12 Rear Panel 13 Stabiliser Brackets
TECHNICAL SPECIFICATIONS
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. SARADAR PATEL VIDYUT BHAVAN, RACE COURSE, BARODA 390 007. TECHNICAL SPECIFICATIONS FOR SELECTIVE LEVEL METER GETCO/E/TS- PACC SLM 03504/R0, Dt: 2.04.2008 Page
SPECIFICATIONS OF ITEMS ANNEXURE-1A Sr. No. Item specification Qty. (in nos.) 1 Computer chair with armrest Approximate Size: Width 64 cm Depth 64cm Height 81.0-93.5 cm Seat Height 42-54.5 as Godrej Model
Tender documents for supply, erection & commissioning of Plante Type Battery to 2x210 MW IB Thermal Power Station.
ORISSA POWER GENERATION CORPORATION LIMITED IB THERMAL POWER STATION AT/P.O: BANHARPALI, DIST: JHARSUGUDA, PIN: 768234 (ORISSA), INDIA GRAM: IB THERMAL, TEL: 06645-222209/222210, FAX: 06645-222209/54/30