Progressive Components led the way with new product introductions and product line additions at Amerimold 2017.

Transcription

1 new product release

2 amerimold 2017 release new products / product line additions Progressive omponents led the way with new product introductions and product line additions at Amerimold From our new ModuLifter Undercut Release System, Inserted Bar Locks and Tapered ate Rings and Plugs, to our expanded line of Inch, IN and JIS Ejector Pins, Inch Blade Ejectors, Z-Series Side Locks, and more, our collection of advantages delivers convenience for mold builders and unmatched tooling performance for molders and OEMs, with availability through direct distribution and authorized dealers throughout the world. All new product pages and A geometry can be found at procomps.com. In addition, we have prepared this supplemental booklet for easy access to these new items listed to the right on page 3. The Progressive Team shown here beginning the day at Amerimold 2017 in Rosemont, Illinois. 2

3 PROUT LINE PROUT AITIONS ATALOG PAGE EJETOR PINS Increased core harness to 48-50Rc. Most consistent diameters in the industry. Performance testing surpasses others. Inch: 5 IN: 6 JIS: 7 BLAE EJETORS Adhered to and expanded industry standards. Sizes begin at.015 blade thickness. Wear resistant O-1, highly dissimilar to insert steels. Not M-2, not H Rc. Easy to machine/grind. 8 ORE PINS Added larger diameters. Added longer lengths. 9 PKO EXTENSIONS New thicknesses for molds with insulator sheets. 10 SPRUE BUSHINGS Added No Hole option. Allows for square sprues for pickers. Allows for small sprues for special materials, LSR. 11 SUPPORT PILLARS AN GUIE SUPPORT PILLARS Added ounterbored series. Added larger diameters. Added longer lengths. Added Guided Support Pillars SIE LOKS Added ME size compatibility for replacement. Provide longer engagement. 14 INSERTE BAR LOKS Standard alignment locks for large molds. Off-the-shelf availability eliminates in-house design and manufacturing. 15 ATERS: NEW SERIES Added Tapered Series ate Stamps. Suitable for MIM, Nylon, LSR, rubber molds, etc. 420 stainless steel for medical applications MOULIFTER Standardized, modular lifter assembly. Simplifies undercut release. esigned for accelerated/decelerated applications. Additional lifter cooling options, components available

4 ejector pins, core pins, sleeves pin comparison chart Pin iameter Standard Head imensions Inch Metric US Inch IN Metric JIS Metric Fraction ecimal mm PRO at #.005 O.S. H T PRO at # H T PRO at # H T 1/ EP031 EP EP (.0354) 0.9 EP (.0394) 1.0 EP EPJ01 4/5/6 4 (.0433) 1.1 EP / (1.2) EP047 EP (.0472) 1.2 EP012 3/4 1.5/2 EPJ012 5/6 4 (.0511) 1.3 EP (.0551) 1.4 EP (.0590) 1.5 EP EPJ015 4/5/6/8 4/6 1/ (1.6) EP (.0630) 1.6 EP016 3/6 1.5/3 (.0669) 1.7 EP017 3/6 1.5/3 (.0675) (1.7) EP (.0708) 1.8 EP018 3/6 1.5/3 5/ (1.9) EP078 EP (.0787) 2.0 EP EPJ02 5/6/8 4/6 (.0855) 2.2 EP022 4/6 2/3 3/ (2.4) EP094 EP (.0984) 2.5 EP EPJ025 6/8 4/6 (.1063) 2.7 EP / (2.8) EP109 EP (.1181) 3.0 EP EPJ03 6/8/9 4/6 1/ (3.2) EP125 EP EP (.1378) 3.5 EP EPJ / (3.6) EP (.1457) 3.7 EP / (4.0) EP156 EP (.1575) 4.0 EP EPJ (.1614) 4.1 EP (.1653) 4.2 EP / (4.4) EP (.1771) 4.5 EP EPJ / (4.8) EP187 EP (.1968) 5.0 EP EPJ / (5.2) EP (.2047) 5.2 EP (.2165) 5.5 EP EPJ / (5.6) EP219 EP / (6.0) EP (.2362) 6.0 EP EPJ06 10 (.2402) 6.1 EP (.2440) 6.2 EP /4.250 (6.4) EP250 EP (.2559) 6.5 EP / (6.7) EP (.2756) 7.0 EP EPJ / (7.1) EP281 EP / (7.5) EP EP / (7.9) EP312 EP (.3150) 8.0 EP EPJ (.3228) 8.2 EP / (8.3) EP (.3346) 8.5 EP / (8.7) EP344 EP (.3543) 9.0 EP / (9.1) EP / (9.5) EP375 EP EP / (9.9) EP (.3950) (10.0) EP (.3937) 10.0 EP EPJ (.4015) 10.2 EP / (10.3) EP406 EP (.4133) 10.5 EP / (10.7) EP (.4269) (10.8) EP (.4330) 11.0 EP / (11.1) EP437 EP / (11.5) EP (.4581) (11.6) EP / (11.9) EP469 EP (.4724) 12.0 EP EPJ (.4803) 12.2 EP / (12.3) EP (.4894) (12.4) EP (.4921) 12.5 EP / (12.7) EP500 EP / (13.5) EP (.5362) (13.6) EP (.5512) 14.0 EP EPJ / (14.3) EP (.5906) 15 EPJ / (15.9) EP (.6299) 16.0 EP EPJ (.6378) 16.2 EP / (17.5) EP (.7087) 18.0 EP EPJ / (19.1) EP (.7874) 20.0 EP EPJ / (22.2) EP (.9842) 25.0 EP (25.4) EP (1.2598) 32.0 EP This chart references standard nominal Ejector Pins and their Progressive prefix. Refer to each specific page for available shoulder lengths and overall lengths. T H 4

5 ejector pins straight pins inch standard L T R.03 4 R a H Tolerances Ø3/64 - Ø7/ ± 2 HR 49 ± 1 HR 68 ±2 HR Ø15/32 and Up m h H-13 ore: HR, Surface: HR d Nominal Pin iameter h t l=6 l=10 l=14 l=18 l=25 l=39 l=50 Standard Standard.005 Oversize Standard.005 Oversize Standard.005 Oversize Standard.005 Oversize Standard 1/ EP031L6 3/ EP047L6 1/ EP062L6 EP062L10 5/ EP078L6 EP078L10 3/ EP094L6 EP094L10 7/ EP109L6 EP109L10 1/ EP125L6 EP125L10 EP130L10 EP125L14 EP130L14 EP125L18 EP125L25 9/ EP141L10 EP141L14 EP146L14 5/ EP156L6 EP156L10 EP161L10 EP156L14 EP161L14 EP156L18 EP156L25 11/ EP172L10 EP172L14 EP177L14 Standard 3/ EP187L6 EP187L10 EP192L10 EP187L14 EP192L14 EP187L18 EP187L25 EP187L39 EP187L50 13/ EP203L10 EP203L14 EP208L14 7/ EP219L6 EP219L10 EP224L10 EP219L14 EP224L14 EP219L25 15/ EP234L10 EP234L14 EP239L14 1/ EP250L6 EP250L10 EP255L10 EP250L14 EP255L14 EP250L18 EP255L18 EP250L25 EP250L39 EP250L50 17/ EP266L10 EP266L14 EP271L14 EP266L25 9/ EP281L6 EP281L10 EP286L10 EP281L14 EP286L14 EP281L18 EP286L18 EP281L25 19/ EP297L10 EP297L14 EP302L14 5/ EP312L6 EP312L10 EP317L10 EP312L14 EP317L14 EP312L18 EP317L18 EP312L25 EP317L25 EP312L39 EP312L50 21/ EP328L10 EP328L14 EP333L14 EP328L25 11/ EP344L6 EP344L10 EP349L10 EP344L14 EP349L14 EP344L25 A insertion point 23/ EP359L10 EP359L14 EP364L14 3/ EP375L6 EP375L10 EP380L10 EP375L14 EP380L14 EP375L18 EP380L18 EP375L25 EP380L25 EP375L39 EP375L50 25/ EP390L14 EP395L14 EP390L18 EP395L25 13/ EP406L6 EP406L10 EP411L10 EP406 L14 EP411L14 EP406L18 EP406L25 27/ EP422L14 EP427L14 7/ EP437L6 EP437L10 EP442L10 EP437L14 EP442L14 EP437L18 EP437L25 EP437L39 29/ EP453L14 EP458L14 15/ EP469L10 EP474L10 EP474L14 EP469L18 EP469L25 31/ EP484L14 EP489L14 1/ EP500L6 EP500L10 EP505L10 EP500L14 EP505L14 EP500 L18 EP500L25 EP505L25 EP500L39 EP500L50 17/ EP531L14 EP536L14 EP531L25 9/ EP562L6 EP562L10 EP562L14 EP562L18 EP562L25 5/ EP625L6 EP625L10 EP625L14 EP625L18 EP625L25 EP625L39 11/ EP687L10 EP687L18 EP687L25 3/ EP750L6 EP750L10 EP750L14 EP750L18 EP750L25 EP750L39 7/ EP875L10 EP875L18 EP875L EP1000L6 EP1000L10 EP1000L14 EP1000L18 EP1000L25 EP1000L39 X For keyed ejectors or pins cut to length, see pages A-10 & A-19 of the standard. For mold-ready detail, refer to the templates in section X. X 5

6 ejector pins, core pins, sleeves ejector pins straight pins din standard T R0.3 max L R a H g6 32 ±2 HR 49 ±1 HR 68 ±2 HR m h ore: HR, Surface: HR A insertion point d Pin iameter h t l=125mm l=160mm l=200mm l=250mm l=400mm l=630mm l=1000mm EP012L125 EP012L EP015L125 EP015L160 EP015L200 EP015L EP016L125 EP016L200 EP016L EP017L125 EP017L200 EP017L EP018L125 EP018L200 EP018L EP02L125 EP02L160 EP02L200 EP02L250 EP02L EP022L125 EP022L160 EP022L200 EP022L250 EP022L EP025L125 EP025L160 EP025L200 EP025L250 EP025L EP027L160 EP027L250 EP027L EP03L125 EP03L160 EP03L200 EP03L250 EP03L EP032L125 EP032L160 EP032L200 EP032L250 EP032L EP035L125 EP035L160 EP035L200 EP035L250 EP035L EP037L160 EP037L250 EP037L EP04L125 EP04L160 EP04L200 EP04L250 EP04L400 EP04L EP041L160 EP041L250 EP041L EP042L125 EP042L160 EP042L200 EP042L250 EP042L EP045L125 EP045L160 EP045L200 EP045L250 EP045L EP047L125 EP047L160 EP047L200 EP047L250 EP047L EP05L125 EP05L160 EP05L200 EP05L250 EP05L400 EP05L630 EP05L EP052L125 EP052L160 EP052L200 EP052L250 EP052L EP055L125 EP055L160 EP055L200 EP055L250 EP055L EP06L125 EP06L160 EP06L200 EP06L250 EP06L400 EP06L630 EP06L EP061L160 EP061L250 EP061L EP062L125 EP062L160 EP062L200 EP062L250 EP062L400 EP062L EP065L125 EP065L160 EP065L200 EP065L250 EP065L EP07L125 EP07L160 EP07L200 EP07L250 EP07L400 EP07L630 EP07L EP075L160 EP075L250 EP075L EP08L125 EP08L160 EP08L200 EP08L250 EP08L400 EP08L630 EP08L EP082L125 EP082L160 EP082L200 EP082L250 EP082L EP085L125 EP085L160 EP085L200 EP085L250 EP085L EP09L125 EP09L160 EP09L200 EP09L250 EP09L EP095L160 EP095L250 EP095L EP10L125 EP10L160 EP10L200 EP10L250 EP10L400 EP10L630 EP10L EP102L125 EP102L160 EP102L200 EP102L250 EP102L EP105L125 EP105L160 EP105L200 EP105L250 EP105L EP11L125 EP11L160 EP11L200 EP11L250 EP11L EP12L125 EP12L160 EP12L200 EP12L250 EP12L400 EP12L630 EP12L EP122L125 EP122L160 EP122L200 EP122L250 EP122L EP125L125 EP125L160 EP125L200 EP125L250 EP125L EP14L125 EP14L160 EP14L200 EP14L250 EP14L400 EP14L EP16L125 EP16L160 EP16L200 EP16L250 EP16L400 EP16L EP162L250 EP162L400 EP162L EP18L160 EP18L200 EP18L250 EP18L400 EP18L EP20L160 EP20L200 EP20L250 EP20L400 EP20L630 EP20L EP25L160 EP25L200 EP25L250 EP25L400 EP25L630 EP25L EP32L160 EP32L200 EP32L250 EP32L400 EP32L630 EP32L1000 For keyed ejectors or pins cut to length, see page A-19. For mold-ready detail, refer to the templates in section X. X 6 X X

7 ejector pins straight pins jis standard L T H R0.3 max 4 R a ±2 HR 49 ±1 HR 68 ±2 HR m SK61 d Pin iam. h ore: HR, Surface: HR h t A insertion point l=100mm l=150mm l=200mm l=250mm l=300mm l=400mm l=500mm l=600mm l=650mm EPJ01L100 EPJ01L150 EPJ01L EPJ015L100 EPJ015L150 EPJ015L200 EPJ015L EPJ02L100 EPJ02L150 EPJ02L200 EPJ02L EPJ025L100 EPJ025L150 EPJ025L200 EPJ025L EPJ03L100 EPJ03L150 EPJ03L200 EPJ03L EPJ035L100 EPJ035L150 EPJ035L200 EPJ035L EPJ04L200 EPJ04L250 EPJ04L300 EPJ04L EPJ045L200 EPJ045L250 EPJ045L300 EPJ045L EPJ05L200 EPJ05L250 EPJ05L300 EPJ05L EPJ055L200 EPJ055L250 EPJ055L300 EPJ055L EPJ06L200 EPJ06L250 EPJ06L300 EPJ06L400 EPJ06L EPJ07L250 EPJ07L300 EPJ07L400 EPJ07L EPJ08L400 EPJ08L500 EPJ08L EPJ10L400 EPJ10L500 EPJ10L EPJ12L500 EPJ12L600 EPJ12L EPJ14L EPJ15L EPJ16L EPJ18L EPJ20L500 For keyed ejectors or pins cut to length, see page A-19. For mold-ready detail, refer to the templates in section X. X 7

8 ejector pins, core pins, sleeves blade ejectors inch standard L ±2 HR R.03 4 R a M Y H T R ±1 HR X m 0-1 h HR A insertion point x y d h t l=6.5 l=7.5 l= BE L6.5 BE L BE L6.5 BE L BE L6.5 BE L BE L6.5 BE L BE L6.5 BE L BE L6.5 BE L BE L6.5 BE L BE L6.5 BE L BE L6.5 BE L BE L6.5 BE L7.5 BE L BE L6.5 BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L BE L6.5 BE L BE L6.5 BE L BE L6.5 BE L7.5 BE L BE L6.5 BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L BE L6.5 BE L7.5 BE L BE L6.5 BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L BE L7.5 BE L10.5 Blade Length M M = 5 M = 5 M = 6 X For custom Blades, refer to the templates in section X. 8

9 core pins L T R.03 H See below 4 R a m H-13 h HR m H-13 d Nominal Pin ia. h Head ia. t Head Thick. l=3 l=6 l=10 l=14 3/ PS094L3 PS094L6 PS094L10 7/ PS109L3 PS109L6 PS109L10 1/ PS125L3 PS125L6 PS125L10 PS125L14 9/ PS141L3 PS141L6 PS141L10 PS141L14 5/ PS156L3 PS156L6 PS156L10 PS156L14 11/ PS172L3 PS172L6 PS172L10 PS172L14 3/ PS187L3 PS187L6 PS187L10 PS187L14 13/ PS203L3 PS203L6 PS203L10 PS203L14 7/ PS219L3 PS219L6 PS219L10 PS219L14 15/ PS234L6 PS234L10 1/ PS250L3 PS250L6 PS250L10 PS250L14 9/ PS281L3 PS281L6 PS281L10 PS281L14 5/ PS312L3 PS312L6 PS312L10 PS312L14 11/ PS344L3 PS344L6 PS344L10 PS344L14 3/ PS375L3 PS375L6 PS375L10 PS375L14 13/ PS406L3 PS406L6 PS406L10 PS406L14 7/ PS437L3 PS437L6 PS437L10 PS437L14 15/ PS469L3 PS469L6 PS469L10 PS469L14 1/ PS500L3 PS500L6 PS500L10 PS500L14 17/ PS531L6 PS531L10 9/ PS562L6 PS562L10 PS562L14 5/ PS625L6 PS625L10 PS625L14 11/ PS687L6 PS687L10 PS / PS750L6 PS750L10 PS750L14 13/ PS812L6 PS812L10 PS812L14 7/ PS875L6 PS875L10 PS875L PS1000L6 PS1000L10 PS1000L14 d Nominal Pin ia. h HR h Head ia. t Head Thick. A insertion point l=3 l=6 l=10 l=14 3/ PH094L3 PH094L6 PH094L10 7/ PH109L3 PH109L6 PH109L10 1/ PH125L3 PH125L6 PH125L10 PH125L14 9/ PH141L3 PH141L6 PH141L10 PH141L14 5/ PH156L3 PH156L6 PH156L10 PH156L14 11/ PH172L3 PH172L6 PH172L10 PH172L14 3/ PH187L3 PH187L6 PH187L10 PH187L14 13/ PH203L3 PH203L6 PH203L10 PH203L14 7/ PH219L3 PH219L6 PH219L10 PH219L14 15/ PH234L6 PH234L10 1/ PH250L3 PH250L6 PH250L10 PH250L14 9/ PH281L3 PH281L6 PH281L10 PH281L14 5/ PH312L3 PH312L6 PH312L10 PH312L14 11/ PH344L3 PH344L6 PH344L10 PH344L14 3/ PH375L3 PH375L6 PH375L10 PH375L14 13/ PH406L3 PH406L6 PH406L10 PH406L14 7/ PH437L3 PH437L6 PH437L10 PH437L14 15/ PH469L3 PH469L6 PH469L10 PH469L14 1/ PH500L3 PH500L6 PH500L10 PH500L14 17/ PH531L6 PH531L10 9/ PH562L6 PH562L10 PH562L14 5/ PH625L6 PH625L10 PH625L14 11/ PH687L6 PH687L10 PH / PH750L6 PH750L10 PH750L14 13/ PH812L6 PH812L10 PH812L14 7/ PH875L6 PH875L10 PH875L PH1000L6 PH1000L10 PH1000L14 X For mold-ready detail, refer to the templates in section X. Note: Heads are annealed on 6, 10 and 14 lengths 9

10 mold base components pko extensions hex series 7/8" Hex Thread (Internal) L PRESS PLATEN BP m AISI 4140 Pre-Hard h HR Internal Thread s Black Oxide External Thread PH37L10 3/8-16 3/8-16 PH50L10 1/2-13 1/2-13 PH62L10 5/8-11 5/8-11 PH62L /2-13 5/8-11 PH75L10 3/4-10 3/4-10 PH75L10-NT N/A 3/4-10 PH37L13 3/8-16 3/8-16 PH50L13 1/2-13 1/2-13 PH62L13 5/8-11 5/8-11 PH62L /2-13 5/8-11 PH75L13 3/4-10 3/4-10 PH75L13-NT N/A 3/4-10 Overall L IMENSIONS: =.875 (BP) (Stop Pins) =.875 (BP) (Stop Pins) (Insulator Plate) " 30 ±2 HR l Overall Thread (External) Internal Thread PKO RO External Thread PH37L15 3/8-16 3/8-16 PH50L15 1/2-13 1/2-13 PH50L15-NT N/A 1/2-13 PH62L15 5/8-11 5/8-11 PH75L15 3/4-10 3/4-10 PH75L15-NT N/A 3/4-10 PH37L18 3/8-16 3/8-16 PH50L18 1/2-13 1/2-13 PH50L18-NT N/A 1/2-13 PH62L18 5/8-11 5/8-11 PH75L18 3/4-10 3/4-10 PH75L18-NT N/A 3/4-10 Ø1 1 /4" Overall L IMENSIONS: = (BP) (Stop Pins) = (BP) (Stop Pins) (Insulator Plate) A insertion point l X For custom PKO Extensions, refer to the templates in section X. pko extensions puck series Thread Internal & External l m AISI 1018 s Black Oxide (2) L 1/4-20 SHS(4) (included) Thread 30 ±2 HR A insertion point PRESS PLATEN BP Ø2 1 /4" PKO RO Ø2.00 PKP37L10 3/8-16 PKP50L10 1/2-13 PKP62L10 5/8-11 PKP75L10 3/4-10 PKPL10-NT No Thread* PKP37L13 3/8-16 PKP50L13 1/2-13 PKP62L13 5/8-11 PKP75L13 3/4-10 PKPL13-NT No Thread* PKP37L15 3/8-16 PKP50L15 1/2-13 PKP62L15 5/8-11 PKP75L15 3/4-10 PKPL15-NT No Thread* PKP37L18 3/8-16 PKP50L18 1/2-13 PKP62L18 5/8-11 PKP75L18 3/4-10 PKPL18-NT No Thread* * Mold maker machines thread on NT style to suit non-standard applications. 10

11 sprue bushings.220 O L /32 R on A & B Series 1 /8 R on U Series.750 Ø ±1 HR R B ±.005 A 2.5 Incl. Angle B Series =Ø1.000 B=.875 m AISI 6150 h HR a l o=5/32 o=7/32 o=9/32 o=11/32 no hole r=1/2 r=3/4 r=1/2 r=3/4 r=1/2 r=3/4 r=1/2 r=3/4 r=1/2 r=3/4 29/ /32 SPRB1-512 SPRB1-534 SPRB1-712 SPRB1-734 SPRB1-912 SPRB1-934 SPRB1-112 SPRB /32 2-9/32 SPRB2-512 SPRB2-534 SPRB2-712 SPRB2-734 SPRB2-912 SPRB2-934 SPRB2-112 SPRB / /32 SPRB3-512 SPRB3-534 SPRB3-712 SPRB3-734 SPRB3-912 SPRB3-934 SPRB3-112 SPRB /32 3-9/32 SPRB4-512 SPRB4-534 SPRB4-712 SPRB4-734 SPRB4-912 SPRB4-934 SPRB4-112 SPRB / /32 SPRB5-512 SPRB5-534 SPRB5-712 SPRB5-734 SPRB5-912 SPRB5-934 SPRB5-112 SPRB5-134 SPRB5-N12 SPRB5-N /32 4-9/32 SPRB6-512 SPRB6-534 SPRB6-712 SPRB6-734 SPRB6-912 SPRB6-934 SPRB6-112 SPRB / /32 SPRB7-512 SPRB7-534 SPRB7-712 SPRB7-734 SPRB7-912 SPRB7-934 SPRB7-112 SPRB /32 5-9/32 SPRB8-512 SPRB8-534 SPRB8-712 SPRB8-734 SPRB8-912 SPRB8-934 SPRB8-112 SPRB / /32 SPRB9-512 SPRB9-534 SPRB9-712 SPRB9-734 SPRB9-912 SPRB9-934 SPRB9-112 SPRB9-134 SPRB9-N12 SPRB9-N / /32 SPRB SPRB SPRB SPRB / /32 SPRB SPRB SPRB SPRB SPRB SPRB SPRB11-N12 SPRB11-N34 A Series =Ø1.000 B=.625 A insertion point a l o=5/32 o=7/32 o=9/32 o=11/32 no hole r=1/2 r=3/4 r=1/2 r=3/4 r=1/2 r=3/4 r=1/2 r=3/4 r=1/2 r=3/4 1-3/ /16 SPRA1-512 SPRA1-534 SPRA1-712 SPRA1-734 SPRA1-912 SPRA1-934 SPRA1-112 SPRA /16 SPRA2-512 SPRA2-534 SPRA2-712 SPRA2-734 SPRA2-912 SPRA2-934 SPRA2-112 SPRA / /16 SPRA3-512 SPRA3-534 SPRA3-712 SPRA3-734 SPRA3-912 SPRA3-934 SPRA3-112 SPRA3-134 SPRA3-N12 SPRA3-N /16 3-5/16 SPRA4-512 SPRA4-534 SPRA4-712 SPRA4-734 SPRA4-912 SPRA4-934 SPRA4-112 SPRA / /16 SPRA5-512 SPRA5-534 SPRA5-712 SPRA5-734 SPRA5-912 SPRA5-934 SPRA5-112 SPRA /16 4-5/16 SPRA6-512 SPRA6-534 SPRA6-712 SPRA6-734 SPRA6-912 SPRA6-934 SPRA6-112 SPRA / /16 SPRA7-512 SPRA7-534 SPRA7-712 SPRA7-734 SPRA7-912 SPRA7-934 SPRA7-112 SPRA7-134 SPRA7-N12 SPRA7-N34 U Series =Ø.750 B=.875 a l o=5/32 o=7/32 o=9/32 no hole r=1/2 r=3/4 r=1/2 r=3/4 r=1/2 r=3/4 r=1/2 r=3/4 29/ /32 SPRU1-512 SPRU1-534 SPRU1-712 SPRU1-734 SPRU1-912 SPRU /32 2-9/32 SPRU2-512 SPRU2-534 SPRU2-712 SPRU2-734 SPRU2-912 SPRU / /32 SPRU3-512 SPRU3-534 SPRU3-712 SPRU3-734 SPRU3-912 SPRU3-934 SPRU3-N12 SPRU3-N /32 3-9/32 SPRU4-512 SPRU4-534 SPRU4-712 SPRU4-734 SPRU4-912 SPRU / /32 SPRU5-512 SPRU5-534 SPRU5-712 SPRU5-734 SPRU5-912 SPRU5-934 SPRU5-N12 SPRU5-N34 Notes: For Hot Sprue Bushings, refer to page K-8. For custom sized Sprues, refer to the templates in section X. 11

12 mold base components support pillars m AISI 1018 h 90 Brinell threaded support pillars d l a b A insertion point counterbored support pillars shcs Threaded Support Pillars 2.5 SP100L2.5 SP100L2.5-B 3/8-16 x 2.5" 3 SP100L3 SP100L3-B 3/8-16 x 3" L A SP100L /8-16 SP100L3.5-B 3/8-16 x 3.5" 4 SP100L4 SP100L4-B 3/8-16 x 4" B 4.5 SP100L4.5 SP100L4.5-B 3/8-16 x 4.5" 2.5 SP125L2.5 SP125L2.5-B 3/8-16 x 2.5" 3 SP125L3 SP125L3-B 3/8-16 x 3" 3.5 SP125L3.5 SP125L3.5-B 3/8-16 x 3.5" SP125L4.62 3/8-16 SP125L4-B 3/8-16 x 4" 4.5 SP125L4.5 SP125L4.5-B 3/8-16 x 4.5" Socket Head ap Screws are included with all Support Pillars. 1 long screws are used with the Threaded Pillars. Refer to the chart for the ounterbored Pillar screw size. Note: All 4.5 long Threaded Support Pillars are tapped for a 3/8-16 set screw so a second pillar can be utilized as an extension SP125L5 SP125L5-B 3/8-16 x 5" 6 SP125L6 SP125L6-B 3/8-16 x 6" 2.5 SP150L2.5 SP150L2.5-B 3/8-16 x 2.5" 3 SP150L3 SP150L3-B 3/8-16 x 3" 3.5 SP150L3.5 SP150L3.5-B 3/8-16 x 3.5" 4 SP150L4.62 3/8-16 SP150L4-B 3/8-16 x 4" Optional 3/8-16 Set Screw (Mold maker to supply) 4.5" 4.5 SP150L4.5 SP150L4.5-B 3/8-16 x 4.5" 5 SP150L5 SP150L5-B 3/8-16 x 5" 6 SP150L6 SP150L6-B 3/8-16 x 6" 2.5 SP200L2.5 SP200L2.5-B 3/8-16 x 2.5" 3 SP200L3 SP200L3-B 3/8-16 x 3" 3.5 SP200L3.5 SP200L3.5-B 3/8-16 x 3.5" 2 4 SP200L4.62 3/8-16 SP200L4-B 3/8-16 x 4" Second pillar can be used to create a longer length pillar 4.5 SP200L4.5 SP200L4.5-B 3/8-16 x 4.5" 5 SP200L5 SP200L5-B 3/8-16 x 5" 6 SP200L6 SP200L6-B 3/8-16 x 6" 5 SP250L5 SP250L5-B 3/8-16 x 5" ounterbored Support Pillars SP250L6.62 3/8-16 SP250L6-B 3/8-16 x 6" 8 SP250L8 SP250L8-B 3/8-16 x 8" L SP300L5 SP300L5-B 5/8-11 x SP300L /8-11 SP300L6-B 5/8-11 x 6.5" 8 SP300L8 SP300L8-B 5/8-11 x 8.5" 4 5 SP400L5 SP400L5-B 5/8-11 x SP400L /8-11 SP400L6-B 5/8-11 x 6.5" 8 SP400L8 SP400L8-B 5/8-11 x 8.5" Smaller diameter Support Pillars available on page L-21. For custom Support Pillars, refer to section X. 12

13 guided support pillars Z L m AISI 4140 h HR s Black Oxide Nominal iameter d d z Notes: Includes (1) SHS as shown in the chart. Guided Ejector Bushings are sold separately on page B-12. l A insertion point shcs GESP75L /4-20 x 2.75" GESP75L3 3 1/4-20 x 3.25" GESP75L /4-20 x 3.75" GESP75L4 4 1/4-20 x 4.25" GESP100L /16-18 x 3" GESP100L3 3 5/16-18 x 3.5" GESP100L /16-18 x 4" GESP100L4 4 5/16-18 x 4.5" GESP100L /16-18 x 5" GESP125L3 3 5/16-18 x 3.5" GESP125L /16-18 x 4" GESP125L4 4 5/16-18 x 4.5" GESP125L /16-18 x 5" GESP125L5 5 5/16-18 x 5.5" GESP150L /8-16 x 4" GESP150L4 4 3/8-16 x 4.5" GESP150L /8-16 x 5" GESP150L5 5 3/8-16 x 5.5" 13

14 alignment locks side locks z-series B S2 W R T Z H A S3 Female: m -2 h ore: HR, Surface: 80 HR s Titanium Nitride oated Male: m H-13 h ore: HR, Surface: 70 HR s Salt Bath Nitride S1 SHS Inch Standard t w a b c d.0001/.0003 learance Per Side h r Pocket Radius s1/s2/s3 ±.01 z hamfer A insertion point shcs SL37X #10-32 x 1/2 SL50X #8-32 x 5/8 SL50X #8-32 x 5/8 SL50X #10-32 x 5/8 SL75X /4-20 x 3/4 SL100X /8-16 x 1 SL125X /2-13 x 1-1/4 SL150X /2-13 x 1-1/2 Screws included. Inch Standard-ompatible t w a b c d.0001/.0003 learance Per Side h r Pocket Radius s1 ±.01 s2 ±.01 s3 ±.01 z hamfer shcs SL62X /4-20 x 3/4" SL62X /4-20 x 3/4" SL75X /8-16 x 1" Screws included. Metric Standard Lubrication: t w a b Non-drying, non-hardening food grade grease is applied to all areas, including the particle rings. c d.002/.008 learance Per Side Screws included. For production, install the locks and wipe down the outside of the Side Locks only; maintain the grease on the mating surfaces and within the rings. h r Pocket Radius s1 ±.25 s2/s3 ±.25 z hamfer shcs SLM16X M6-1.0 x 18 SLM19X M x 20 SLM19X M x 20 SLM25X M x 25 X For custom Locks, refer to the templates in section X. Note: 500 F max operating temperature. 14 US Patent No. 8,821,144 and others pending.

15 inserted bar locks z-series Progressive s Inserted Bar Locks are engineered for long term alignment of very large molds: Longevity that far surpasses others, confirmed by extensive independent lab testing as well as monitored performance in harsh, real world conditions. esigned to align large injection molds up to 75,000 pounds (B-Side and platen). Inserts are also sold individually to retrofit onto existing molds. Bar: m 4140 h ore: HR s Black Oxide Inserts : m H-13 h ore: HR, Surface 70 HR s Salt Bath Nitride t w1 w2 l n c s1 s2 s3 r p Minimum 0 REF REF ±.01 ±.01 ±.01 Pocket Pocket Radius Length bar lock assemblies shcs total max lbs. supported BLN150L /-.002 BLN250L /-.002 BLN350L / /2-13 x , /8-11 x , /4-10 x ,000 Note: Each includes (1) Bar and (2) Inserts with screws. Guides are sold separately. bar L P guides A insertion point W1 S3 W2 PW R S1 S2 N T E L S5 S4 m -2 h ore: HR, Surface: 80 HR s Titanium Nitride oated t l pw c e REF s4 ±.01 s5 ±.01 shcs guides use with BLG150L /8-16 x 1.75 BLN150L8 BLG150L /8-16 x 1.75 BLN150L8 BLG250L /2-13 x 2.75 BLN250L10 T BLG350L /8-11 x 3.75 BLN350L13 Notes: Guides are sold in pairs. Each includes (2) Guides and (4) screws. 500 F max operating temperature. US Patent No. 8,821,144 and others pending. 15

16 ABEFGHIJKLM 10 daters, air valves date stamps tapered series 1 8 L T LP P 56 ± 2 HR M PROOMPS.OM A Etched for replacement source h6 T Hex is present for tightening the set screw thread from parting line when plug is not installed. m h HR d Nominal Ring iameter l m t Engraving epth c a lp Arrow Engraving epth A insertion point p 4 14 M2 x M1.4 x M3 x M1.6 x M3 x M1.6 x M4 x M2.5 x M5 x M2.5 x M6 x M3 x M8 x M3.5 x 0.6 To Order: Specify as shown below for the different style rings and plugs. Ring Styles: Recessed Lettering Plug Styles: Recessed Lettering Months at #: Ex.: TPR-iam TPR05 A - M at #: Ex.: TPRA-iam TPRA Year at #: Ex.: TPRP-iam Year* TPRP at #: Ex.: TPR-iam TPRN05 NOPQRSTUVWXYZ N - Z at #: Ex.: TPRZ-iam TPRZ05 Arrow Only at #: TPRP-iam AO Ex.: TPRP05-AO Blank at #: Ex.: TPR-iam B TPR05-B at #: Ex.: TPRT-iam TPRT05 at #: Ex.: TPRP-iam TPRP Years at #: Ex.: TPRY-iam Starting Year* TPRY05-18 Installation Guidelines: Ring can be installed using the included set screw or retained with a screw from the back. H7 No height variation during rotation *Where years are specified, any year can be ordered by changing the suffix. Example TPRP05-18 or TPRY To create ate Stamps for days, purchase both the 0-30 ring (TPRT) and the 0-9 ring (TPRN) and the desired plugs. ate Plug ompression Unit ate Ring L Special configurations are available. ontact ustomer Service for more information. European dater delivery in 2 weeks maximum, with shorter deliveries subject to availability. M (Set Screw) M (Optional SHS) T (Max) Maximum mold temperature: 450 F (230 ) 16 Patent No. E

17 date stamps replacement plugs Locking Series Plugs Tapered Series ompact Locking Plugs RF-Series Plugs To replace Progressive s Locking Series plugs To replace Progressive s Tapered Series plugs To replace Progressive s ompact Locking Series plugs To replace Progressive s RF- or H-Series plugs. PROOMPS.OM ////PRO PROOMPS.OM PROOMPS.OM ate Ring atalog Number c NP04-18 N NP05-18 N NP06-18 N NP08-18 N NP10-18 N NP12-18 N NP16-18 N ate Ring atalog Number c TPRP04-18 TPR TPRP05-18 TPR TPRP06-18 TPR TPRP08-18 TPR TPRP10-18 TPR TPRP12-18 TPR TPRP16-18 TPR ate Ring atalog Number c TNP03-18 TN TNP04-18 TN TNP05-18 TN TNP06-18 TN TNP08-18 TN TNP10-18 TN TNP12-18 TN TNP16-18 TN TNP20-18 TN ate Ring atalog Number c FP03-18 F FP04-18 F FP05-18 F FP06-18 F FP08-18 F FP10-18 F FP12-18 F FP16-18 F H & -Series Plugs 20 Series Plugs Multi-aters Retro Plugs To replace Progressive s H- or -Series plugs or ME front style plugs. Springs included. To replace Progressive s 20 Series plugs. Springs included. To replace Progressive s Multi- ater Plugs. To replace plugs previously purchased for PS/umsa style rings. ////PRO ////PRO ////PRO ////PRO ////PRO PROOMPS.OM PROOMPS.OM PROOMPS.OM ////PRO PROOMPS.OM PROOMPS.OM ////PRO PROOMPS.OM PROOMPS.OM PROOMPS.OM.67 (17mm).67 (17mm) ate Ring atalog Number c P P P P P P P P For -Series replacements, add to the. Ex. P ate Ring atalog Number c LP06-18 L LP08-18 L LP10-18 L LP16-18 L ate Ring atalog Number* c MP06-18 M MP08-18 M MP10-18 M MP12-18 M MP16-18 M ate Ring atalog Number* c P32-18 S P47-18 S P57-18 S P67-18 S P87-18 S For Retro Plugs outside of North America, call for availability from local distributors. *Retro ate Rings are not available. Refer to the pages for the specific series required for plugs with alternate engraving such as, Arrow Only, or raised versions. ontact ustomer Service for availability of special plugs or for verification of the plugs required. PROOMPS.OM PROOMPS.OM 17

18 unilifters, undercut release modulifter undercut release system A standardized modular lifter assembly that simplifies undercut release: Specialized design for accelerated and decelerated applications. Additional lifter cooling options and components available. Straight Travel Accelerated/ ecelerated Options ooled: Single Rod In/Out ooled: ual Rod In/Out 18

19 modulifter base assembly/lifter rod L W F H Rod (sold separately) Base Assembly includes: Rod oupling Assembly Gibs (2) Mounting Screws (4) owels installed H/2 Aº SL SHS Gibs/oupling: m 1045 h HR s Nitride Slides: m A304 (Graphite Plugs if specified) nominal rod diameter Ø a=0 a=5 a=10 l w h d f shcs 1/2 MLBA050 MLBA050-5 MLBA /4-20 x 1-1/2.87 5/8 MLBA063 MLBA063-5 MLBA /4-20 x 1-1/ /4 MLBA075 MLBA075-5 MLBA /16-18 x MLBA100 MLBA100-5 MLBA /16-18 x /4 MLBA125 MLBA125-5 MLBA /8-16 x 2-1/ /2 MLBA150 MLBA150-5 MLBA /8-16 x 2-3/ Note: Includes (4) SHS and (4) owels. For ModuLifter Base Assemblies with different Gib angles, contact Engineering. To order with Graphite Plugged Base, add GP to the part as shown, Ex: MLBAGPxxx. base assembly travel (l-sl) A insertion point G lifter rod F Thread for SHS L m 1045 h HR d l f g shcs.500 MLR050L /4-20 x 5/8.625 MLR063L /16-18 x 3/4.750 MLR075L /8-16 x 7/ MLR100L /2-13 x MLR125L /8-11 x 1-1/ MLR150L /8-11 x 1-1/2 Note: Includes (1) installation SHS. For additional rod lengths contact Engineering. A insertion point 19

20 unilifters, undercut release modulifter cooled base assembly/lifter rod Rod (sold separately) Base Assembly includes: Rod oupling Assembly Gibs (2) Mounting Screws (4) owels installed ooling Base Assemblies have three (3) options for varying water connections. L F W H H/2 Aº ascade (sold separately) SL SHS cooled base assembly Gibs/oupling: m 1045 h HR s Nitride Slides: m A304 (Graphite Plugs if specified) nominal rod diameter Ø a=0 a=5 a=10 l w h d f shcs 5/8 MLBA063 MLBA063-5 MLBA /4-20 x 1-1/ /4 MLBA075 MLBA075-5 MLBA /16-18 x MLBA100 MLBA100-5 MLBA /16-18 x /4 MLBA125 MLBA125-5 MLBA /8-16 x 2-1/ /2 MLBA150 MLBA150-5 MLBA /8-16 x 2-3/ travel (l-sl) Note: Includes (4) SHS and (4) owels. For ModuLifter Base Assemblies with different Gib angles, contact Engineering. To order with Graphite Plugged Base, add GP to the part as shown, Ex. MLBAGPxxx. A insertion point cooled lifter rod NUT T2 G OAL RO O m 1045 h HR od T1 id oal l F t1 Internal Thread t2 External Thread.625 MLR063L / / MLR075L / / MLR100L /2-20 3/ MLR125L /2-20 7/ MLR150L /2-20 7/ L I g f Note: Includes (1) Installation Nut. For additional ooling Lifter Rod lengths contact Engineering. A insertion point 20

21 O O I I O I O O I I modulifter cooling cascades TH TH TH For For For Ø1/4 Ø1/4 Ø1/4 Hose Hose Hose Out Out In In Out In TH TH For For Ø1/4 Ø1/4 Hose Hose Out Out In In TH TH For For Ø1/4 Ø1/4 Hose Hose I I m A304 and Stainless Steel. Fittings: Nickel Plated Brass. Parallel (In & Out) Series (In & Out) Single (In Only) od id od id id thd nominal rod diameter Ø MLP16L MLS16L25.12 ML12 5/ /8, 3/ MLP23L MLS23L25.20 ML20 1/2-20 1, 1-1/4, 1-1/2 Note: Straight Fittings included with ooling ascades. push-to-connect hose fittings HEX2 HEX2 HEX2 OAL OAL HEX1 HEX1 OAL HEX2 HEX2 HEX1 HEX2 A A A HEX1 HEX1 OAL OAL A HEX1 A HEX1 HEX1 OAL A HEX1 fitting type hose od thd (npt) hex1 hex2 a oal m Nickel Plated Brass with Sealant Straight MLFS25 1/4 1/8 1/2 5/32.87 Elbow MLFE25 1/4 1/8 1/2.83 Banjo MLFB25 1/4 1/8 9/16 1/ Note: Maximum Operating Temperature 160. B B push-to-connect L L B B spiral and straight hoses m Polyurethane hose od hose id turns oal l b d MLH25-5 1/4 5/ MLH /4 5/ OAL OAL B L B MLH /4 5/32 Straight 25.0 Note: Maximum Operating Temperature 160. OAL 21

22 unilifters, undercut release modulifter lifter rod bushing Groove ia. Bore ia. L Groove Width B Retaining Ring Bushing Bushing ia. Bushings: m Retaining Ring: m Steel s Black Oxide d b l Groove iameter Groove Width Bore iameter ±.002 MLBSH50L MLBSH63L MLBSH75L MLBSH100L MLBSH125L MLBSH150L Note: Includes (1) Retaining Ring. rod coupling assembly plate machining option W A (2) H oupling: m 1045 h HR s Nitride Slides: m A304 (Graphite Plugs if specified) nominal rod diameter Ø Non-ooled ooled w h ±.001 a /2 R /8 R063 R /4 R075 R R100 R /4 R125 R /2 R150 R Note: To order slides with Graphite Plugs, add GP to the part as shown, Ex: RGP050 or RGP

23 modulifter installation guidelines for base assemblies S2 P2 owel R 2 1 Z1 Z2 P1 owel G2 S1 G1 nominal rod diameter Ø s1 ±.005 Installation imensions s2 ±.005 p1 owel ±.0005 p2 owel ± / / / / / r Pocket Max d z g1 ±.005 Accel./ecel. Keying owel g2 ± d2 rill Ø z2 rill epth +.03/ installation methods Bottom Mount Top Mount 23

24 solutions for better performing tools For our complete line of production mold components visit us online at or call to request your copy of our full. ustomer Service