Shaping Tools and Power Tool Accessories

Transcription

1 Shaping Tools and Power Tool Accessories 1

2 TABLE OF CONTENTS THE SIMONDS STORY The year was 1832, only 56 years since America s independence. It was in that year that Abel Simonds set up a small workshop in Fitchburg, Massachusetts to provide scythe blades for sawmills, cotton mills, and some of the very first paper mills. More than 180 years have passed since those early beginnings and Simonds is now the oldest cutting tool manufacturer in North America. Today, Simonds offers one of the broadest and most trusted lines of cutting tools and power tool accessories found anywhere in the world. Craftsmen and tradesmen from many industries have grown to depend on the quality and innovation of Simonds products and services. For all those years, skilled masters in many wood and metal fabricating industries have turned to Simonds for products and services to improve their position in the marketplace. Simonds provided The Professionals Edge then, and carries on that tradition today. Simonds has a rich history, having experienced many important milestones over its lengthy history: Simonds founded by Abel Simonds, producing skythe blades and knives Circular saw blades introduced, using a patented tempering system Wide bandsaw blades introduced, becoming the core product range Cross-cut hand saw introduced with patented grinding process Fitchburg File Works purchased, producing files & hacksaws since Electric-powered steel mill built to fill Simonds growing demand The Abrasive Co. purchased, with a reputation as an innovator in abrasives Heller Brothers purchased, the oldest manufacturer of files, since The Atrax Co. purchased, the largest manufacturer of carbide drills & burrs Simonds introduced world s first bimetal band saw blades Ralston File purchased, the U.K. s largest file manufacturer, since The hole saw division of Anderson Products is purchased, adding PTA The Nicholson bandsaw division of Cooper Tools is purchased Simonds celebrates its 175th year anniversary. 3 MACHINIST FILES Flat, Hand, Mill, Half Round, Round, Square, and Three Square files 10 SAW FILES Triangular taper, feather edge, and chainsaw files 14 ROTARY BURS Solid tungsten carbide rotary burs 18 CIRCULAR SAW BLADES Carbide tipped circular saw blades and steel brush cutter blades 22 DIAMOND WHEELS Turbo diamond wheel blades 23 ABRASIVE WHEELS Cut-off wheels, Grinding wheels, flap discs 25 HACKSAW BLADES HSS and bimetal hacksaw blades 26 RECIP BLADES Bimetal reciprocating saw blades 27 HOLE SAWS Annular cutters, Bimetal hole saws, diamond grit hole saws 30 DRILL BITS Carbide-tipped and high speed steel drill bits 2 3

3 MACHINIST FILES MACHINIST FILES Machinist Files File Terminology Coarseness Bastard cut Second cut Smooth cut Work to be accomplished, roughing or finishing will determine type of teeth and coarseness for each application Most American pattern files are available with 3 grades of cut: bastard-cut, second-cut and smooth-cut The degree of coarseness is greater in longer files, but differences between bastard, second and smooth are proportionate Length Tang Heel Belly Point Length is measured exclusive of tang, from point to heel, unless otherwise specified Desired stroke length, type of material and size will determine length required Shape Length Used by machinists, machinery builders, ship and engine builders, repairman and others who require rapid removal of metal Rectangular in cross section and taper slightly towards point in width Flat Files - Boxed Double-cut on sides, single-cut on edges Available in bastard, second and smooth-cut Bastard Cut Second Cut Smooth Cut Cat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton Inch mm No No No Pack Pack 4 100mm ,200 Machinist Files 6 150mm Boxed Packaging 8 200mm * mm * mm * Area to be filed will determine specific cross-section (round, square, flat, etc.) to be used mm * * Nucut Wavy Tooth pattern featured on 8 to 14 flat bastard-cut files Kinds of Teeth Half Round Files - Boxed Single-cut Nucut Wavy Tooth Single set of parallel, diagonal rows of teeth Single-cut files are often used with light pressure to produce a smooth surface finish or to put a keen edge on knives, shears or saws Coarse to fine to extra fine tooth spacing enables material to be removed faster and smoother without chatter File lasts longer due to reduced stress on the file teeth Used on concave, convex and flat surfaces Rounded on 1 side, flat on opposite Backs of all half-round bastard files are double-cut Backs of all half-round second cut files longer than 6 are double-cut Backs of all 4 and 6 files are single-cut Backs of all half-round smooth files are single-cut Flat sides of all half-round files are double-cut Pipeliner file is single-cut on back and flat sides Double-cut Multi-Kut Bastard Cut Second Cut Smooth Cut Cat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton Inch mm No No No Pack Pack 4 100mm sets of diagonal rows of teeth Second set of teeth cut in opposite diagonal direction and on top of the first set First set of teeth is known as the overcut, second is known as upcut Upcut is finer than overcut Double-cut file is used with heavier pressure than the single-cut and removes material faster from the workpiece Removes material faster while creating a smooth finish The combination of coarse teeth and a chip breaker groove cut into the file allows this product to do the work of a flat file and a mill file Vixen Curved Tooth 6 150mm mm mm mm mm mm Pipeliner Teeth arranged in curved contours across the file face Curved-cut files are normally used in automotive body shops for smoothing body panels 4 5

4 MACHINIST FILES MACHINIST FILES Machinist Files Hand Files - Boxed Rectangular shape Double-cut 1 safe edge Same coarseness as flat files with corresponding lengths Bastard Cut Second Cut Smooth Cut Cat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton Inch mm No No No Pack Pack 4 100mm Primarily used to file circular openings or concave surfaces Round shape All 4, 5, 6, 10, 12 files are single-cut 14 bastard file is double-cut Round Files - Boxed Tapered slightly towards point Safe point on round files Bastard Cut Second Cut Smooth Cut Cat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton Inch mm No No No Pack Pack Machinist Files 6 150mm mm , mm mm mm mm mm mm mm Mill Files - Boxed Square Files - Boxed Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges All sizes taper slightly in width Bastard Cut Second Cut Smooth Cut Cat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton Inch mm No No No Pack Pack 4 100mm ,080 Used on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corresponding flat files because of heavier section and 4 filing surfaces Bastard Cut Second Cut Smooth Cut Cat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton Inch mm No No No Pack Pack 6 150mm mm mm mm mm mm , mm mm mm mm

5 MACHINIST FILES MACHINIST FILES Machinist Files Three Square Files - Boxed For general use by machinists for filing internal angles more acute than right angles, cleaning out square corners and filing taps and gutters Triangular shape Double-cut Sharp corners are slightly set and cut Cut to the point Bastard Cut Second Cut Smooth Cut Cat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton Inch mm No No No Pack Pack Simonds exclusive Multi-Kut design features a diamond pattern double chip-breaker allowing for fast stock removal while leaving a smooth finish. Obtain almost any required finish simply by changing the feed pressure Multi-Kut Flat Files - Boxed Single-cut on sides & edges Combines the performance of flat and mill files Length Cat. UPC Shelf Carton Inch mm Packed No. No. Pack Pack Machinist Files 6 150mm mm Boxed mm mm Boxed mm mm Boxed mm Boxed Knife Files - Boxed Multi-Kut Hand Files - Boxed Used primarily by tool and die makers with work having acute angles Triangular shape Double-cut on sides, single-cut on sharp edges Knife files are supplied with safe backs Bastard Cut Second Cut Smooth Cut Cat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton Inch mm No No No Pack Pack Simonds exclusive Multi-Kut design features a diamond pattern double chip-breaker allowing for fast stock removal while leaving a smooth finish. Obtain almost any required finish simply by changing the feed pressure Double-cut, 1 safe edge Combines the performance of flat and mill files 4 100mm , mm mm mm Warding Files - Boxed Length Cat. UPC Shelf Carton Inch mm Packed No. No. Pack Pack 6 150mm Boxed mm Boxed mm Boxed mm Boxed Multi-Kut Half Round Files - Boxed Used primarily by locksmiths in repairing and filing ward notches in keys Triangular shape Double-cut on sides, single-cut on edges Also suited for use in narrow spaces where other files will not fit Bastard Cut Second Cut Smooth Cut Cat. UPC No. Cat. UPC No. Cat. UPC No. Shelf Carton Inch mm No No No Pack Pack 4 100mm , mm mm mm Simonds exclusive Multi-Kut design features a diamond pattern double chip-breaker allowing for fast stock removal while leaving a smooth finish. Obtain almost any required finish simply by changing the feed pressure Used on concave, convex and flat surfaces Rounded on 1 side, flat on opposite Both sides are double cut with second cut coarseness Length Cat. UPC Shelf Carton Inch mm Packed No. No. Pack Pack 6 150mm Boxed mm Boxed mm Boxed

6 TAPER SAW FILES TAPER SAW FILES Taper Saw Files Taper (Triangular) Saw Files Number of Saw Points Files Recommended 4 7 Heavy or 8 Regular Taper 5 7 Regular Taper or 10 Slim 5½ 7 Regular Taper or 10 Slim 6 5 or 6 Regular Taper 7 or 8 Slim 7 6 or 7 Slim Made for filing saws with 60 angle teeth Triangular shape Single-cut Edges set and cut for filing gullets between saw teeth In filing handsaws, it is important to select the right file In general, the table lists suggested size and type of file that will give best results Triangular shape Edges set and cut for filing gullets between saw teeth Taper Files - Slim - Boxed Tapers slightly towards the point Taper Saw Files 8 4 Regular Taper 6 Slim, 7 X Slim, 8 XX Slim 9 5 Slim, 6 X Slim, 7 XX Slim 10 3½ Regular Taper or 5 Slim, 5 X Slim, 6 XX Slim Length Cat. UPC Shelf Carton Inch mm Packed No. No. Pack Pack 4 100mm Boxed , mm Boxed , Regular Taper or 6 150mm Boxed Slim, 5 X Slim, 6 XX Slim 12 3 Regular Taper or 5 X Slim 13,14 4 X Slim or 5 XX Slim 15,16 4 XX Slim 7 175mm Boxed mm Boxed mm Boxed Taper Files - Heavy - Boxed Taper Files - Extra Slim - Boxed Triangular shape Edges set and cut for filing gullets between saw teeth Tapers slightly towards the point Length Cat. UPC Shelf Carton Inch mm Packed No. No. Pack Pack Triangular shape Edges set and cut for filing gullets between saw teeth Tapers slightly towards the point Length Cat. UPC Shelf Carton Inch mm Packed No. No. Pack Pack 4 100mm Boxed , mm Boxed mm Boxed , mm Boxed Taper Files - Regular - Boxed Taper Files - Double Extra Slim - Boxed Triangular shape Edges set and cut for filing gullets between saw teeth Tapers slightly towards the point Length Cat. UPC Shelf Carton Inch mm Packed No. No. Pack Pack 3 75mm Boxed Triangular shape Edges set and cut for filing gullets between saw teeth Tapers slightly towards the point Length Cat. UPC Shelf Carton Inch mm Packed No. No. Pack Pack 3½ 90mm Boxed mm Boxed , mm Boxed mm Boxed , mm Boxed mm Boxed mm Boxed

7 SPECIALTY FILES HANDLED FILES Specialty Files Chain Saw Files - Round - Boxed For sharpening round-hooded chain saw teeth Safe point Double-cut Round shape Length Diameter Cat. UPC Shelf Carton Inch mm Inch mm Packed No. No. Pack Pack 8 200mm 1/8 3.2mm 6pcs/Box mm 5/32 4.0mm 6pcs/Box mm 3/16 4.8mm 6pcs/Box mm 13/64 5.2mm 6pcs/Box mm 7/32 5.6mm 6pcs/Box Cat. UPC Shelf Carton Description No. No. Pack Pack 6" / 150mm Flat Bastard " / 150mm Flat Smooth " / 200mm Flat Bastard " / 200mm Flat Smooth " / 250mm Flat Bastard " / 250mm Flat Smooth " / 300mm Flat Bastard " / 300mm Flat Smooth " / 250mm Mill Bastard " / 300mm Mill Bastard " / 100mm Half Round Bastard Handled Files Handled Files 4" / 100mm Half Round Smooth Feather Edge Saw Files - Boxed 6" / 150mm Half Round Bastard " / 150mm Half Round Smooth " / 200mm Half Round Bastard " / 200mm Half Round Smooth " / 250mm Half Round Bastard " / 250mm Half Round Smooth " / 300mm Half Round Bastard Used for filing saws with tooth angle less than 60 Diamond shape Single-cut on sides and edges 12" / 300mm Half Round Smooth " / 100mm Round Bastard Length Cat. UPC Shelf Carton Inch mm Packed No. No. Pack Pack 4" / 100mm Round Smooth " / 150mm Round Bastard mm Boxed " / 150mm Round Smooth mm Boxed " / 200mm Round Bastard mm Boxed " / 200mm Round Smooth mm Boxed " / 250mm Round Bastard " / 250mm Round Smooth Vixen Curved Tooth Files 12" / 300mm Round Bastard " / 300mm Round Smooth " / 100mm XX Slim Taper " / 100mm X Slim Taper " / 100mm Slim Taper " / 125mm Slim Taper Ideal for smooth, rapid work on cast iron, bronze, lead, babbit, aluminum, zinc, plastics and any steel up to the hardness of annealed tool steel Rectangular shaped Curved-cut milled teeth Ptich and rake designed to avoid pinning and to provide smoothest finish Length No. of Teeth Cat. UPC Shelf Carton Inch mm Per Inch/Cut Packed No. No. Pack Pack mm 9/Standard Boxed " / 150mm Slim Taper " / 175mm Slim Taper " / 200mm Slim Taper " / 250mm Slim Taper " / 200mm x 5/32" / 4.0mm Chainsaw " / 200mm x 3/16" / 4.8mm Chainsaw " / 200mm x 7/32" / 5.6mm Chainsaw

8 CARBIDE BURS CARBIDE BURS Carbide Burs Tungsten Carbide Burs Solid carbide burs are designed for machining materials of virtually any hardness. They can be used for deburring, milling, chamfering, trimming, and cutting holes. Available in both double-cut and aluminum cut versions, and in twelve shapes, they are able to handle a variety of applications. Recommendations Always operate the bur within the recommended RPM. Select the appropriate shape, diameter and cut style for the application. Use a smooth cutting action with constant movement in both directions. Use light pressure, letting the bur do the work. Flute Styles Dimensions Length Diameter Packaging Overall Length Shannk D-13M 4.0mm 3.6mm 6.0mm 50.0mm D-1M 6.0mm 5.4mm 6.0mm 45.0mm D-2M 8.0mm 7.2mm 6.0mm 47.0mm D-3M 10.0mm 9.0mm 6.0mm 49.0mm D-4M 11.0mm 9.5mm 6.0mm 51.0mm D-5M 12.0mm 10.8mm 6.0mm 51.0mm D-6M 16.0mm 14.4mm 6.0mm 54.0mm D-7M 19.0mm 16.0mm 6.0mm 60.0mm Shape D - 6mm Shank Shape E - 6mm Shank Carbide Burs E-1M 6.0mm 10.0mm 6.0mm 50.0mm E-2M 8.0mm 13.0mm 6.0mm 53.0mm Double-cut Aluminum Cut Shape A - 6mm Shank Shape B - 6mm Shank A-13M 4.0mm 13.0mm 6.0mm 50.0mm A-1M 6.0mm 16.0mm 6.0mm 55.0mm A-2M 8.0mm 20.0mm 6.0mm 60.0mm A-3M 10.0mm 20.0mm 6.0mm 60.0mm A-4M 11.0mm 25.0mm 6.0mm 65.0mm A-5M 12.0mm 25.0mm 6.0mm 65.0mm A-6M 16.0mm 25.0mm 6.0mm 65.0mm A-7M 19.0mm 25.0mm 6.0mm 65.0mm B-13M 4.0mm 13.0mm 6.0mm 50.0mm B-1M 6.0mm 16.0mm 6.0mm 55.0mm B-2M 8.0mm 20.0mm 6.0mm 60.0mm B-3M 10.0mm 20.0mm 6.0mm 60.0mm B-4M 11.0mm 25.0mm 6.0mm 65.0mm B-5M 12.0mm 25.0mm 6.0mm 65.0mm B-6M 16.0mm 25.0mm 6.0mm 65.0mm B-9M 25.0mm 25.0mm 6.0mm 65.0mm E-3M 10.0mm 16.0mm 6.0mm 55.0mm E-5M 12.0mm 20.0mm 6.0mm 60.0mm E-6M 16.0mm 25.0mm 6.0mm 65.0mm F-1M 6.0mm 18.0mm 6.0mm 58.0mm F-2M 8.0mm 20.0mm 6.0mm 60.0mm F-3M 10.0mm 20.0mm 6.0mm 60.0mm F-4M 11.0mm 25.0mm 6.0mm 65.0mm F-5M 12.0mm 25.0mm 6.0mm 65.0mm F-6M 16.0mm 25.0mm 6.0mm 65.0mm G-1M 6.0mm 18.0mm 6.0mm 58.0mm G-2M 8.0mm 18.0mm 6.0mm 60.0mm G-3M 10.0mm 20.0mm 6.0mm 60.0mm G-5M 12.0mm 25.0mm 6.0mm 65.0mm G-6M 16.0mm 25.0mm 6.0mm 65.0mm Shape F - 6mm Shank Shape G - 6mm Shank Shape C - 6mm Shank C-13M 4.0mm 16.0mm 6.0mm 50.0mm C-1M 6.0mm 16.0mm 6.0mm 55.0mm C-1M/L1 6.0mm 25.0mm 6.0mm 50.0mm C-2M 8.0mm 20.0mm 6.0mm 60.0mm C-3M 10.0mm 20.0mm 6.0mm 60.0mm C-4M 11.0mm 25.0mm 6.0mm 65.0mm C-5M 12.0mm 25.0mm 6.0mm 65.0mm C-6M 16.0mm 25.0mm 6.0mm 65.0mm H-1M 6.0mm 18.0mm 6.0mm 65.0mm H-2M 8.0mm 20.0mm 6.0mm 65.0mm H-3M 10.0mm 25.0mm 6.0mm 65.0mm H-5M 12.0mm 32.0mm 6.0mm 65.0mm H-6M 16.0mm 36.0mm 6.0mm 65.0mm Shape H - 6mm Shank 14 15

9 CARBIDE BURS CARBIDE BURS Carbide Burs Shape J - 6mm Shank J-1M 6.0mm 5.2mm 6.0mm 50.0mm J-2M 8.0mm 7.0mm 6.0mm 52.0mm J-3M 10.0mm 8.7mm 6.0mm 53.0mm J-5M 12.0mm 10.4mm 6.0mm 55.0mm J-6M 16.0mm 13.8mm 6.0mm 56.0mm Image Tungsten Carbide Burs - 3mm Shank Carbide Burs Shape K - 6mm Shank K-1M 6.0mm 3.0mm 6.0mm 50.0mm K-2M 8.0mm 4.0mm 6.0mm 50.0mm K-3M 10.0mm 5.0mm 6.0mm 50.0mm K-5M 12.0mm 6.0mm 6.0mm 51.0mm K-6M 16.0mm 8.0mm 6.0mm 53.0mm K-7M 19.0mm 17.5mm 6.0mm 65.0mm Item No Model No. A41 A42 A42L2 A43 A43L3 B41 B42 B43 B43L2 B43L3 C41 C42 C42L2 C42L3 D41 Cutter Diameter Cutter Length Overall Length Image Shape L - 6mm Shank Shape M - 6mm Shank L-1M 6.0mm 16.0mm 6.0mm 56.0mm L-2M 8.0mm 22.0mm 6.0mm 62.0mm L-3M 10.0mm 25.0mm 6.0mm 65.0mm L-4M 12.0mm 28.0mm 6.0mm 68.0mm L-5M 16.0mm 33.0mm 6.0mm 73.0mm M-1M 6.0mm 12.7mm 6.0mm 50.0mm M-2M 6.0mm 18.0mm 6.0mm 58.0mm M-3M 8.0mm 17.0mm 6.0mm 57.0mm M-4M 10.0mm 20.0mm 6.0mm 60.0mm M-5M 12.0mm 25.0mm 6.0mm 65.0mm M-6M 16.0mm 25.0mm 6.0mm 65.0mm Item No Model No. D42 E41 F41 F42 F42L2 F42L3 G41 G43 G44 H41 L41 L42 M41 M42 M42L2 Cutter Diameter Cutter Length Overall Length Image Item No Model No. M42L3 M43 N41 N42 A51 B51 B51EC C51 D51 E51 F51 G51 M51 N51 A52 Cutter Diameter Cutter Length Overall Length Shape N - 6mm Shank N-1M 6.0mm 8.0mm 6.0mm 50.0mm N-2M 10.0mm 10.0mm 6.0mm 53.0mm N-4M 12.0mm 12.0mm 6.0mm 57.0mm N-6M 16.0mm 19.0mm 6.0mm 63.0mm Image Item No Model No. B52 C52 D52 A53 B53 C53 D53 E53 F53 G53 H53 L53 M53 N53 Cutter Diameter Cutter Length Overall Length

10 CIRCULAR SAW BLADES CIRCULAR SAW BLADES Circular Saw Blades - For Wood Circular Saw Blades - For Wood Circular Saws For use in circular saws Carbide tips resists wear under extreme conditions Blade made of the finist alloy steel Expansion slots prevents blade wobble Precision finished to exacting standards Alternate tip bevel (ATB) grind for fast cutting Fits all popular saws with 25.4mm or 30mm arbors Sold in box packaging Diameter Blade Tip Tip Arbor Bushing Cat. UPC Shelf Carton Inch mm Teeth Width Width Grind mm mm No. No. Pack Pack 9 230mm 20T 1.8mm 2.8mm ATB 25.4mm 20mm mm 24T 1.8mm 2.8mm ATB 25.4mm 20mm mm 30T 1.8mm 2.8mm ATB 25.4mm 20mm mm 40T 1.8mm 2.8mm ATB 25.4mm 20mm mm 60T 1.8mm 2.8mm ATB 25.4mm 20mm mm 80T 1.8mm 2.8mm ATB 25.4mm 20mm mm 16T 1.8mm 2.8mm ATB 25.4mm 20mm mm 20T 1.8mm 2.8mm ATB 25.4mm 20mm Circular Saws mm 24T 1.8mm 2.8mm ATB 25.4mm 20mm mm 30T 1.8mm 2.8mm ATB 25.4mm 20mm mm 40T 1.8mm 2.8mm ATB 25.4mm 20mm mm 60T 1.8mm 2.8mm ATB 25.4mm 20mm mm 80T 1.8mm 2.8mm ATB 25.4mm 20mm mm 100T 1.8mm 2.8mm ATB 25.4mm 20mm mm 16T 2.0mm 3.0mm ATB 25.4mm 20mm mm 20T 2.0mm 3.0mm ATB 25.4mm 20mm Diameter Blade Tip Tip Arbor Bushing Cat. UPC Shelf Carton Inch mm Teeth Width Width Grind mm mm No. No. Pack Pack mm 24T 2.0mm 3.0mm ATB 25.4mm 20mm mm 30T 2.0mm 3.0mm ATB 25.4mm 20mm mm 20T 1.2mm 2.2mm ATB 20mm 16mm mm 40T 2.0mm 3.0mm ATB 25.4mm 20mm mm 24T 1.2mm 2.2mm ATB 20mm 16mm mm 60T 2.0mm 3.0mm ATB 25.4mm 20mm mm 30T 1.2mm 2.2mm ATB 20mm 16mm mm 80T 2.0mm 3.0mm ATB 25.4mm 20mm mm 30T 1.4mm 2.4mm ATB 25.4mm 20mm mm 100T 2.0mm 3.0mm ATB 25.4mm 20mm mm 20T 1.4mm 2.4mm ATB 25.4mm 20mm mm 20T 2.2mm 3.2mm ATB 30mm 25.4mm mm 24T 1.4mm 2.4mm ATB 25.4mm 20mm mm 24T 2.2mm 3.2mm ATB 30mm 25.4mm mm 30T 1.4mm 2.4mm ATB 25.4mm 20mm mm 30T 2.2mm 3.2mm ATB 30mm 25.4mm ½ 160mm 40T 1.4mm 2.4mm ATB 25.4mm 20mm mm 40T 2.2mm 3.2mm ATB 30mm 25.4mm ½ 160mm 50T 1.4mm 2.4mm ATB 25.4mm 20mm mm 60T 2.2mm 3.2mm ATB 30mm 25.4mm mm 16T 1.4mm 2.4mm ATB 25.4mm 20mm mm 80T 2.2mm 3.2mm ATB 30mm 25.4mm mm 20T 1.4mm 2.4mm ATB 25.4mm 20mm mm 100T 2.2mm 3.2mm ATB 30mm 25.4mm mm 24T 1.4mm 2.4mm ATB 25.4mm 20mm mm 20T 2.5mm 3.5mm ATB 30mm 25.4mm mm 30T 1.4mm 2.4mm ATB 25.4mm 20mm mm 24T 2.5mm 3.5mm ATB 30mm 25.4mm ¼ 184mm 40T 1.4mm 2.4mm ATB 25.4mm 20mm mm 30T 2.5mm 3.5mm ATB 30mm 25.4mm ¼ 184mm 60T 1.4mm 2.4mm ATB 25.4mm 20mm mm 40T 2.5mm 3.5mm ATB 30mm 25.4mm ½ 190mm 40T 1.4mm 2.4mm ATB 25.4mm 20mm mm 20T 3.0mm 4.0mm ATB 30mm 25.4mm ½ 190mm 60T 1.4mm 2.4mm ATB 25.4mm 20mm mm 24T 3.0mm 4.0mm ATB 30mm 25.4mm mm 20T 1.4mm 2.4mm ATB 25.4mm 20mm mm 30T 3.0mm 4.0mm ATB 30mm 25.4mm mm 24T 1.4mm 2.4mm ATB 25.4mm 20mm mm 40T 3.0mm 4.0mm ATB 30mm 25.4mm mm 30T 1.4mm 2.4mm ATB 25.4mm 20mm mm 20T 3.0mm 4.0mm ATB 30mm 25.4mm mm 40T 1.4mm 2.4mm ATB 25.4mm 20mm mm 24T 3.0mm 4.0mm ATB 30mm 25.4mm mm 60T 1.4mm 2.4mm ATB 25.4mm 20mm mm 30T 3.0mm 4.0mm ATB 30mm 25.4mm mm 80T 1.4mm 2.4mm ATB 25.4mm 20mm mm 40T 3.0mm 4.0mm ATB 30mm 25.4mm

11 CIRCULAR SAW BLADES CIRCULAR SAW BLADES Circular Saw Blades - For Aluminum Brushcutter Blades - For Brush Circular Saws For cutting non-ferrous metals such as aluminum Carbide tips resists wear under extreme conditions Blade made of the finist alloy steel Expansion slots prevents blade wobble Precision finished to exacting standards Triple Chip Grind (TCG) grind for smooth cutting Fits all popular saws with 25.4mm or 30mm arbors Sold in box packaging For use in brush cutters Blade coated with black oxide to resist rust Blade made of the finist alloy steel Teeth can be reset and sharpened Precision finished to exacting standards Fits brush cutters with 25.4mm arbors Sold in clamshell packaging Brushcutters Diameter Blade Tip Tip Arbor Bushing Cat. UPC Shelf Carton Inch mm Teeth Width Width Grind mm mm No. No. Pack Pack 4 110mm 28T 1.2mm 2.2mm TCG 20mm 16mm ¼ 184mm 60T 1.4mm 2.4mm TCG 25.4mm 20mm mm 80T 1.8mm 2.8mm TCG 25.4mm 20mm mm 100T 1.8mm 2.8mm TCG 25.4mm 20mm mm 120T 1.8mm 2.8mm TCG 25.4mm 20mm mm 80T 2.0mm 3.0mm TCG 25.4mm 20mm mm 100T 2.0mm 3.0mm TCG 25.4mm 20mm mm 120T 2.0mm 3.0mm TCG 25.4mm 20mm mm 80T 2.2mm 3.2mm TCG 30mm 25.4mm mm 100T 2.2mm 3.2mm TCG 30mm 25.4mm mm 120T 2.2mm 3.2mm TCG 30mm 25.4mm Diameter Blade Tip Tooth Arbor Bushing Cat. UPC Shelf Carton Inch mm Teeth Thickness Kerf Pattern mm mm No. No. Pack Pack mm 80T 1.6mm 2.0mm Offset 25.4mm None

12 ABRASIVE WHEELS CIRCULAR SAW BLADES Diamond Wheels - For Masonry For cutting masonry materials such as tile & brick Cuts 70 times longer than abrasive wheels Turbo continuous rim design for wet & dry cutting Expansion hole pattern prevents blade wobble Hard diamond grit welded to cutting edge Fits all popular saws with 20mm or 25.4mm arbors Sold in clamshell packaging Cut-Off Wheels - For Steel For use in angle grinders and chop saws Cuts hard metal materials including stainless steel Thin-kerf design for faster, more efficient cutting White aluminum oxide grit (WA46) for extreme cutting Reinforced with double-weave fiberglasss mesh Specially treated grain combination for aggressive cutting Packed in attractive cardboard boxes Abrasive Wheels Diameter Rim Blade Rim Arbor Bushing Cat. UPC Shelf Carton Inch mm Type Width Height mm mm No. No. Pack Pack 4 105mm Turbo 1.2mm 5.0mm 20mm 16mm mm Turbo 2.0mm 5.0mm 20mm 16mm mm Turbo 1.2mm 7.0mm 22mm 20mm mm Turbo 2.0mm 7.0mm 22mm 20mm mm Turbo 2.2mm 7.0mm 22mm 20mm mm Turbo 2.6mm 7.0mm 22mm 20mm mm Turbo 2.6mm 7.0mm 22mm 20mm mm Turbo 3.1mm 7.0mm 22mm 20mm mm Turbo 3.1mm 7.0mm 22mm 20mm mm Turbo 3.2mm 7.0mm 22mm 20mm mm Turbo 3.4mm 7.0mm 25.4mm 20mm Diameter Thickness Arbor Max. UPC No Shelf Carton Inch mm Inch mm Inch mm RPM Stainless Metal Pack Pack 4 105mm 0.040'' 1.0mm 5/8" 16.0mm 15, mm 0.079'' 2.0mm 5/8" 16.0mm 15, mm 0.047'' 1.2mm 5/8" 16.0mm 12, mm 0.047'' 1.2mm 7/8" 22.0mm 10, mm 0.079'' 2.0mm 7/8" 22.0mm 10, mm 0.063'' 1.6mm 7/8" 22.0mm 8, mm 0.098'' 2.5mm 7/8" 22.0mm 8, mm 0.118'' 3.0mm 1" 25.4mm 6, mm 0.118'' 3.0mm 1" 25.4mm 5, mm 0.118'' 3.0mm 1" 25.4mm 4, Abrasive Wheels Grinding Wheels - For Steel For cutting masonry materials Segmented for wet & dry cutting Turbo for wet & dry cutting Continuous for wet cutting Hot pressed for longer durability Sold in clamshell packaging Also available in 7 (180mm) For use in angle grinders Cuts hard metal materials including stainless steel White aluminum oxide grit (WA46) for extreme cutting Reinforced with double-weave fiberglasss mesh Specially treated grain combination for aggressive grinding Diameter Rim Blade Rim Arbor Bushing Cat. UPC Shelf Carton Inch mm Type Width Height mm mm No. No. Pack Pack 4 105mm Segmented 1.8mm 7.0mm 20mm 16mm mm Turbo 1.2mm 7.0mm 20mm 16mm mm Continuous 1.8mm 7.0mm 20mm 16mm Diameter Thickness Arbor Max. UPC No Shelf Carton Inch mm Inch mm Inch mm RPM Stainless Metal Pack Pack 4 100mm mm 5/8" 16.0mm 15, mm mm 7/8" 22.0mm 12, mm mm 7/8" 22.0mm 10, mm mm 7/8" 22.0mm 8, mm mm 7/8" 22.0mm 6,

13 ABRASIVE WHEELS HACKSAW BLADES Flap Discs - For Steel Hand Hacksaw Blades - All-Hard HSS For use in angle grinders to quickly remove material Much faster than traditional grinding wheels Aluminum Oxide (black) abrasive for all-purpose use Zirconia Alumina (blue) abrasive for maximum durability Durable fiberglass backing plate absorbs vibration Available in either flat (Type 27) or angled (Type 29) shape Meets European and U.S. standards for coated abrasives Packed in attractive cardboard boxes For cutting various metals including alloys and stainless steels Made of fully hardened high speed steel for durability Lasts up to 10 times longer than carbon steel blades Cutting edges are vacuum heat treated to Rc Packed in 100pc plastic boxes for adequate protection Abrasive Wheels Diameter Blade Arbor Max. Aluminum Oxide (SG-A) Zirconia Alumina (SG-Z) Shelf Carton Inch mm Grit Inch mm RPM Type 27 Type 29 Type 27 Type 29 Pack Pack 4 105mm 40 5/8" 16.0mm 15, mm 60 5/8" 16.0mm 15, mm 80 5/8" 16.0mm 15, mm 120 5/8" 16.0mm 15, /2 115mm 40 7/8" 22.0mm 13, /2 115mm 60 7/8" 22.0mm 13, /2 115mm 80 7/8" 22.0mm 13, /2 115mm 120 7/8" 22.0mm 13, mm 40 7/8" 22.0mm 12, mm 60 7/8" 22.0mm 12, mm 80 7/8" 22.0mm 12, mm 120 7/8" 22.0mm 12, mm 40 7/8" 22.0mm 10, mm 60 7/8" 22.0mm 10, mm 80 7/8" 22.0mm 10, mm 120 7/8" 22.0mm 10, mm 40 7/8" 22.0mm 8, mm 60 7/8" 22.0mm 8, mm 80 7/8" 22.0mm 8, mm 120 7/8" 22.0mm 8, Model Tooth Cat. Length Teeth Width Gauge UPC Shelf Carton No. Set No. Inch mm Per Inch Inch mm Inch mm No. Pack Pack SA1214 Wavy mm 14 TPI 1/2 12.7mm mm ,000 SA1218 Wavy mm 18 TPI 1/2 12.7mm mm ,000 SA1224 Wavy mm 24 TPI 1/2 12.7mm mm ,000 SA1232 Wavy mm 32 TPI 1/2 12.7mm mm ,000 Hand Hacksaw Blades - Bi-Metal For cutting various metals including alloys and stainless steels Made of flexible spring steel back welded to HSS tooth line Lasts up to 10 times longer than carbon steel blades Cutting edges are vacuum heat treated to Rc Packed in 100pc plastic boxes for adequate protection Model Tooth Cat. Length Teeth Width Gauge UPC Shelf Carton No. Set No. Inch mm Per Inch Inch mm Inch mm No. Pack Pack SB1214 Wavy mm 14 TPI 1/2 12.7mm mm ,000 SB1218 Wavy mm 18 TPI 1/2 12.7mm mm ,000 SB1224 Wavy mm 24 TPI 1/2 12.7mm mm ,000 SB1232 Wavy mm 32 TPI 1/2 12.7mm mm ,000 Hacksaw Blades Hand Hacksaw Blades - Care and Servicing General Tooth Recommendations 14 Tooth: For cutting stock 1 /25.4mm or over in cross section. For soft materials where maximum chip clearance is needed. 18 Tooth: For general shop use, when blade is used on several jobs. 24 Tooth: For cross section 1/16 (1.58mm) - 1/4 (6.35mm) such as pipe, angles, small drill rod. 32 Tooth: To cut stock up to 1/16 (1.58mm) such as light tubing, sheet metal Choose the Right Number of Teeth Per Inch The coarseness of the teeth affects blade efficiency. Speed varies according to the material being cut and the saw blade coarseness. Starting the Cut If possible, avoid starting cuts on sharp corners. When unavoidable, begin with light pressure and use a steady forward stroke. As many teeth as possible should be in contact with the cutting area and at least three teeth must be engaged. Rounded Teeth - Premature Wear 1. Blade not cutting. Use slower stroke and apply heavier feed. 2. Dragging on return stroke. Lift saw. 3. Material too hard. Select proper blade. Tooth Breakage 1. Teeth too coarse. Keep three teeth in the work. 2. Too much feed, teeth loading. Ease feed pressure. 3. Teeth too fine, clogging. Change to coarser tooth. 4. Starting cut on sharp corner. Reposition work. Blade Breakage 1. Lack of tension. Tighten until taught. 2. Too much tension. Loosen slightly. 3. Cutting in awkward position. Use flexible type blades. 4. Jamming in cut. Hold work securely - stock should fall free after cut. In soft material teeth may be binding because they are too fine

14 RECIPROCATING SAW BLADES HOLE SAWS For use in electric or cordless reciprocating saws to cut metal Made of flexible spring steel back welded to HSS tooth line Lasts up to 10 times longer than carbon steel blades Cutting edges are vacuum heat treated to Rc Packed in 5pc clamshell boxes for adequate protection Reciprocating Saw Blades - Bi-Metal Annular cutters - Carbide tipped For use on magnetic drills Universal shank Most efficient method of cutting holes in metals Also available in 35mm cutting depth Also available in full High Speed Steel body Guide pins available in 2 sizes Packed in individual boxes for protection Recip Blades Model Set Cat. Length Teeth Width Gauge UPC Shelf Carton No. Type No. Inch mm Per Inch Inch mm Inch mm No. Pack Pack 610 Wavy 38610TS mm 10 TPI 3/4 19mm mm Wavy 38614TS mm 14 TPI 3/4 19mm mm Wavy 38618TS mm 14 TPI 3/4 19mm mm Wavy 38624TS mm 18 TPI 3/4 19mm mm Wavy 38810TS mm 10 TPI 3/4 19mm mm Wavy 38814TS mm 14 TPI 3/4 19mm mm Wavy 38818TS mm 14 TPI 3/4 19mm mm Wavy 38824TS mm 18 TPI 3/4 19mm mm Wavy 38910TS mm 10 TPI 3/4 19mm mm Wavy 38914TS mm 14 TPI 3/4 19mm mm Wavy 38918TS mm 14 TPI 3/4 19mm mm Wavy 38924TS mm 18 TPI 3/4 19mm mm For use in pneumatic reciprocating saws to cut metal Made of flexible spring steel back welded to HSS tooth line Lasts up to 10 times longer than carbon steel blades Cutting edges are vacuum heat treated to Rc Packed in 5pc clamshell boxes for adequate protection Air Saw Blades - Bi-Metal Model Set Cat. Length Teeth Width Gauge UPC Shelf Carton No. Type No. Inch mm Per Inch Inch mm Inch mm No. Pack Pack A14 Wavy 38A mm 14 TPI 3/4 19mm mm A18 Wavy 38A mm 18TPI 3/4 19mm mm A24 Wavy 38A mm 24 TPI 3/4 19mm mm A32 Wavy 38A mm 32 TPI 3/4 19mm mm Model Cat. Diameter Cutting Depth Overall Length Shank UPC Shelf Carton No. No. Inch mm Inch mm Inch mm mm type No. Pack Pack AC1250C 12 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC1350C 13 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC1450C 9/16 14 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC1550C 15 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC1650C 5/8 16 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC1750C 11/16 17 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC1850C 18 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC1950C 3/4 19 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC2050C 20 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC2150C 13/16 21 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC2250C 7/8 22 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC2350C 23 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC2450C 15/16 24 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC2550C 1 25 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC2650C 26 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC2750C 1-1/16 27 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC2850C 28 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC2950C 1-1/8 29 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC3050C 1-3/16 30 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC3150C 31 mm 2" 50 mm 3-3/4 95 mm 19 mm Universal AC3250C 1-1/4 32 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC3350C 1-5/16 33 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC3450C 34 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC3550C 1-3/8 35 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC3650C 36 mm 2" 50 mm 3-3/4 95 mm 19 mm Universal AC3750C 1-7/16 37 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC3850C 1-1/2 38 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC3950C 39 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC4050C 1-9/16 40 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC4150C 1-5/8 41 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC4250C 42 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC4350C 1-11/16 43 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC4450C 1-3/4 44 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC4550C 45 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC4650C 1-13/16 46 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC4750C 47 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC4850C 1-7/8 48 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC4950C 49 mm 2 50 mm 3-3/4 95 mm 19 mm Universal AC5050C 50 mm 2 50 mm 3-3/4 95 mm 19 mm Universal Annular Cutters 26 27

15 HOLE SAWS HOLE SAWS Hole Saws - Bi-Metal Hole Saws - Bi-Metal For cutting holes in metal and wood Bi-metal construction with cobalt tooth tip Improved tooth geometry for 20% faster cutting Simonds vari-gullet design cleans chip faster Rugged 3/16 back plaste for increased stability 4/6 variable pitch tooth reduces vibration Packed in individual blister packs for protection Model Cat. Diameter Pipe Tap Pipe Entrance Arbor UPC Shelf Carton No. No. Inch mm Inch mm Inch mm Inch mm No. Pack Pack 92BHS /8" 92mm 5/8" 16.0mm BHS /4" 95mm 3" 76mm 5/8" 16.0mm BHS /8" 98mm 3-1/2" 89mm 5/8" 16.0mm BHS " 102mm 5/8" 16.0mm BHS /8" 105mm 3-1/2" 89mm 5/8" 16.0mm Model Cat. Diameter Pipe Tap Pipe Entrance Arbor UPC Shelf Carton No. No. Inch mm Inch mm Inch mm Inch mm No. Pack Pack 14BHS /16" 14mm 1/2" 25.4mm BHS /8" 16mm 1/2" 25.4mm BHS /16" 17mm 1/2" 25.4mm BHS /4" 19mm 1/2" 13mm 3/8" 10mm 1/2" 25.4mm BHS /16" 21mm 1/2" 25.4mm BHS /8" 22mm 3/4" 19mm 1/2" 13mm 1/2" 25.4mm BHS /16" 24mm 1/2" 25.4mm BHS " 25mm 1/2" 25.4mm BHS /4" 108mm 4" 102mm 5/8" 16.0mm BHS /8" 111mm 5/8" 16.0mm BHS /2" 114mm 5/8" 16.0mm BHS /4" 121mm 4-1/2" 114mm 4" 102mm 5/8" 16.0mm BHS " 127mm 5/8" 16.0mm BHS /4" 133mm 5/8" 16.0mm BHS /2" 140mm 5/8" 16.0mm BHS /4" 146mm 5/8" 16.0mm BHS " 152mm 5/8" 16.0mm BHS /16" 27mm 1/2" 25.4mm BHS /8" 29mm 1" 25mm 3/4" 19mm 1/2" 25.4mm BHS /16" 30mm 1/2" 25.4mm BHS /4" 32mm 5/8" 16.0mm BHS /16" 33mm 5/8" 16.0mm BHS /8" 35mm 1" 25mm 5/8" 16.0mm BHS /16" 37mm 5/8" 16.0mm BHS /2" 38mm 1-1/4" 32mm 5/8" 16.0mm Also available; FLEEM GROUND teeth geometry Cuts up to 50% faster, and upto 25% longer life Bi-metal construction with 8% cobalt tooth tip Wide slots on side walls for increased visibility during cutting Rugged 3/16 back plaste for increased stability 4/6 variable pitch tooth reduces vibration Packed in individual blister packs for protection 40BHS /16" 40mm 5/8" 16.0mm BHS /8" 41mm 5/8" 16.0mm Hole Saws 43BHS /16" 43mm 5/8" 16.0mm BHS /4" 44mm 1-1/2" 38mm 1-1/4" 32mm 5/8" 16.0mm BHS /16" 46mm 5/8" 16.0mm BHS /8" 48mm 5/8" 16.0mm BHS " 51mm 1-1/2" 38mm 5/8" 16.0mm BHS /8" 54mm 5/8" 16.0mm BHS /4" 57mm 2" 51mm 5/8" 16.0mm BHS /16" 59mm 5/8" 16.0mm For cutting holes in ceramic tile Threads on head surface deliver cleaner cuts Patented vacuum brazed diamond grit for durability Lasts 20 times longer than normal diamond grit hole saws Quick change universal shank for easy discharging Packed in reusable tubes for easy storage Hole Saws - Diamond Grit Hole Saws 60BHS /8" 60mm 5/8" 16.0mm BHS /2" 63mm 2" 51mm 5/8" 16.0mm Model Cat. Diameter Pipe Tap Pipe Entrance Shangk UPC Shelf Carton No. No. Inch mm Inch mm Inch mm Inch mm No. Pack Pack 65BHS /16" 65mm 5/8" 16.0mm DHS /64" 5mm 1/4" 6.35mm BHS /8" 67mm 2-1/2" 63mm 5/8" 16.0mm DHS /4" 6mm 3" 76mm 1/4" 6.35mm BHS /4" 70mm 5/8" 16.0mm DHS /32" 7mm 3-1/2" 89mm 1/4" 6.35mm BHS " 76mm 2-1/2" 63mm 5/8" 16.0mm DHS /16" 8mm 1/4" 6.35mm BHS /8" 79mm 5/8" 16.0mm DHS /32" 10mm 1/4" 6.35mm BHS /4" 83mm 3" 76mm 5/8" 16.0mm DHS /2" 12mm 1/4" 6.35mm BHS /8 86mm 5/8" 16.0mm DHS /32" 15mm 1/4" 6.35mm BHS /2 89mm 5/8" 16.0mm DHS /16" 20mm 1/4" 6.35mm

16 MASONRY DRILLS HAMMER DRILLS Masonry Drill Bits Hammer Drill Bits For drilling hard masonry materials Unique diamond ground carbide tip for faster holes Extra hard, thicker, and more robust cardide tip Ground flutes helps remove material faster Professional surface treatment finish resists corrosion Packed in reusable tubes for easy storage For use in rotary hammer drills to drill concrete Unique diamond ground carbide tip for faster holes Extra hard, thicker, and more robust cardide tip Ground flutes helps remove material faster Professional surface treatment finish resists corrosion Packed in reusable tubes for easy storage Diameter Working Overall Item Shelf Carton mm Inch Length Length Shank No. UPC No. Packaging Pack Pack Diameter Working Overall Item Shelf Carton mm Inch Length Length Shank No. UPC No. Packaging Pack Pack 3.0mm 1/8 40mm 70mm CYL Plastic Tube mm 1/8 25mm 85mm SDS Plastic Tube mm 45mm 75mm CYL Plastic Tube mm 50mm 110mm SDS Plastic Tube mm 45mm 80mm CYL Plastic Tube mm 45mm 85mm CYL Plastic Tube mm 3/16 50mm 90mm CYL Plastic Tube mm 55mm 95mm CYL Plastic Tube mm 60mm 100mm CYL Plastic Tube mm 1/4 60mm 105mm CYL Plastic Tube mm 1/4 115mm 165mm CYL Plastic Tube mm 65mm 110mm CYL Plastic Tube mm 70mm 115mm CYL Plastic Tube mm 5/16 70mm 120mm CYL Plastic Tube mm 5/16 110mm 160mm CYL Plastic Tube mm 75mm 120mm CYL Plastic Tube mm 80mm 130mm CYL Plastic Tube mm 3/8 85mm 135mm CYL Plastic Tube mm 50mm 110mm SDS Plastic Tube mm 3/16 50mm 110mm SDS Plastic Tube mm 3/16 100mm 160mm SDS Plastic Tube mm 50mm 110mm SDS Plastic Tube mm 100mm 160mm SDS Plastic Tube mm 50mm 110mm SDS Plastic Tube mm 100mm 160mm SDS Plastic Tube mm 150mm 210mm SDS Plastic Tube mm 200mm 260mm SDS Plastic Tube mm 1/4 50mm 110mm SDS Plastic Tube mm 1/4 100mm 160mm SDS Plastic Tube mm 1/4 150mm 210mm SDS Plastic Tube mm 1/4 200mm 260mm SDS Plastic Tube mm 50mm 110mm SDS Plastic Tube mm 100mm 160mm SDS Plastic Tube mm 3/8 110mm 160mm CYL Plastic Tube mm 5/16 50mm 110mm SDS Plastic Tube mm 90mm 140mm CYL Plastic Tube mm 5/16 100mm 160mm SDS Plastic Tube mm 7/16 105mm 160mm CYL Plastic Tube mm 5/16 150mm 210mm SDS Plastic Tube mm 105mm 160mm CYL Plastic Tube mm 5/16 240mm 300mm SDS Plastic Tube Masonry Drills 13.0mm 1/2 100mm 160mm CYL Plastic Tube mm 9/16 100mm 160mm CYL Plastic Tube mm 100mm 160mm CYL Plastic Tube mm 5/8 85mm 160mm CYL Plastic Tube mm 11/16 80mm 160mm CYL Plastic Tube mm 80mm 160mm CYL Plastic Tube mm 3/4 80mm 160mm CYL Plastic Tube mm 13/16 80mm 160mm CYL Plastic Tube mm 7/8 80mm 160mm CYL Plastic Tube mm 15/16 80mm 160mmm CYL Plastic Tube mm 1 80mm 160mm CYL Plastic Tube mm 5/16 290mm 350mm SDS Plastic Tube mm 100mm 160mm SDS Plastic Tube mm 150mm 210mm SDS Plastic Tube mm 3/8 100mm 160mm SDS Plastic Tube mm 3/8 150mm 210mm SDS Plastic Tube mm 3/8 290mm 350mm SDS Plastic Tube mm 3/8 400mm 460mm SDS Plastic Tube mm 50mm 110mm SDS Plastic Tube mm 100mm 160mm SDS Plastic Tube mm 80mm 160mm SDS Plastic Tube mm 240mm 300mm SDS Plastic Tube mm 290mm 350mm SDS Plastic Tube Hammer Drills * Additional sizes available upon request 10.0mm 400mm 460mm SDS Plastic Tube

17 HAMMER DRILLS HAMMER DRILLS Hammer Drill Bits * Additional sizes available upon request Hammer Drill Bits Diameter Working Overall Item Shelf Carton mm Inch Length Length Shank No. UPC No. Packaging Pack Pack 11.0mm 7/16 100mm 160mm SDS Plastic Tube mm 7/16 240mm 300mm SDS Plastic Tube mm 100mm 160mm SDS Plastic Tube mm 150mm 210mm SDS Plastic Tube mm 240mm 300mm SDS Plastic Tube mm 290mm 350mm SDS Plastic Tube mm 400mm 460mm SDS Plastic Tube mm 1/2 100mm 160mm SDS Plastic Tube mm 1/2 150mm 210mm SDS Plastic Tube mm 1/2 200mm 260mm SDS Plastic Tube mm 1/2 240mm 300mm SDS Plastic Tube mm 1/2 290mm 350mm SDS Plastic Tube mm 9/16 100mm 160mm SDS Plastic Tube mm 9/16 150mm 210mm SDS Plastic Tube mm 9/16 200mm 260mm SDS Plastic Tube mm 9/16 240mm 300mm SDS Plastic Tube mm 9/16 290mm 350mm SDS Plastic Tube mm 9/16 400mm 460mm SDS Plastic Tube mm 9/16 540mm 600mm SDS Plastic Tube mm 9/16 940mm 1000mm SDS Plastic Tube mm 100mm 160mm SDS Plastic Tube mm 240mm 300mm SDS Plastic Tube mm 5/8 100mm 160mm SDS Plastic Tube mm 5/8 150mm 210mm SDS Plastic Tube mm 5/8 240mm 300mm SDS Plastic Tube mm 5/8 290mm 350mm SDS Plastic Tube mm 5/8 400mm 460mm SDS Plastic Tube mm 5/8 940mm 1000mm SDS Plastic Tube mm 11/16 150mm 210mm SDS Plastic Tube 5 20 Diameter Working Overall Item Shelf Carton mm Inch Length Length Shank No. UPC No. Packaging Pack Pack 20.0mm 13/16 940mm 1000mm SDS Plastic Tube mm 7/8 150mm 210mm SDS Plastic Tube mm 7/8 200mm 260mm SDS Plastic Tube mm 7/8 250mm 310mm SDS Plastic Tube mm 7/8 290mm 350mm SDS Plastic Tube mm 7/8 350mm 410mm SDS Plastic Tube mm 7/8 400mm 460mm SDS Plastic Tube mm 7/8 540mm 600mm SDS Plastic Tube mm 7/8 740mm 800mm SDS Plastic Tube mm 7/8 940mm 1000mm SDS Plastic Tube mm 15/16 150mm 210mm SDS Plastic Tube mm 15/16 200mm 260mm SDS Plastic Tube mm 15/16 250mm 310mm SDS Plastic Tube mm 15/16 290mm 350mm SDS Plastic Tube mm 15/16 350mm 410mm SDS Plastic Tube mm 15/16 400mm 460mm SDS Plastic Tube mm 15/16 540mm 600mm SDS Plastic Tube mm 15/16 740mm 800mm SDS Plastic Tube mm 15/16 940mm 1000mm SDS Plastic Tube mm 1 150mm 210mm SDS Plastic Tube mm 1 200mm 260mm SDS Plastic Tube mm 1 250mm 310mm SDS Plastic Tube mm 1 290mm 350mm SDS Plastic Tube mm 1 350mm 410mm SDS Plastic Tube mm 1 400mm 460mm SDS Plastic Tube mm 1 540mm 600mm SDS Plastic Tube mm 1 740mm 800mm SDS Plastic Tube mm 1 940mm 1000mm SDS Plastic Tube mm 11/16 200mm 260mm SDS Plastic Tube mm 11/16 240mm 300mm SDS Plastic Tube mm 11/16 290mm 350mm SDS Plastic Tube 5 20 Demolition Chisels 18.0mm 11/16 350mm 410mm SDS Plastic Tube mm 11/16 400mm 460mm SDS Plastic Tube 5 20 Hammer Drills 18.0mm 11/16 540mm 600mm SDS Plastic Tube mm 3/4 140mm 200mm SDS Plastic Tube mm 3/4 240mm 300mm SDS Plastic Tube mm 3/4 400mm 460mm SDS Plastic Tube mm 13/16 150mm 210mm SDS Plastic Tube mm 13/16 200mm 260mm SDS Plastic Tube mm 13/16 250mm 310mm SDS Plastic Tube mm 13/16 290mm 350mm SDS Plastic Tube mm 13/16 350mm 410mm SDS Plastic Tube mm 13/16 400mm 460mm SDS Plastic Tube mm 13/16 540mm 600mm SDS Plastic Tube mm 13/16 740mm 800mm SDS Plastic Tube 2 10 For use in SDS+ & SDS Max tools with percussion Treated high tensile body for better durability Diameter Shape Width Length Shank Item No. UPC No. Packaging Pack Pack 14mm Pointed 250mm SDS Hang tag mm Flat 20mm 250mm SDS Hang tag mm Pointed 280mm Hex Hang tag mm Pointed 280mm SDS Max Hang tag mm Flat 25mm 280mm SDS Max Hang tag 1 25 * Additional sizes available upon request Hammer Drills 32 33

18 JOBBER DRILLS JOBBER DRILLS TiN Coated Jobber Drills - Fractional TiN Coated Jobber Drills - Metric Cat. UPC Shelf Carton Description No. No. Pack Pack 1.0mm split point begins drilling immediately minimizing bit walk Titanium nitride coating. This gold colored coating lasts up to six times longer than standard high speed steel drill bits Reduces friction, very wear resistant Coating is very hard, approximately 80 Rockwell C Ideal for production work or repetitive drilling Packed in reusable plastic tubes for easy storage 1.5mm mm mm mm mm Cat. UPC Shelf Carton Description No. No. Pack Pack 1/64" /32" /64" /16" /64" /32" /64" /8" /64" /32" /64" /16" /64" /32" /64" /4" /64" /32" /64" /16" /64" /32" mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm pc set 1.0mm-10.0mm pc set 1.0mm-13.0mm * Additional sizes available upon request 23/64" Jobber Drills 3/8" /16" /2" /32" /16" /8" /16" TiN Coated Jobber Drills - 16mm Reduced Shank Cat. UPC Shelf Carton Description No. No. Pack Pack 14.0mm mm mm Jobber Drills 13pc set 1/16''-1/4'' mm pc set 1/16''-3/8' mm pc set 1/16''-1/2' mm * Additional sizes available upon request * Additional sizes available upon request 34 35

19 Simonds International World Headquarters 135 Intervale Parkway Fitchburg, MA U.S.A. Tel: Fax: Simonds International Asia Headquarters 2F, #71, Lane 145 Tun Hua N. Rd. Taipei, Taiwan Tel: Fax: Simonds International APAC / EMEA Sales 772, Bedok Reservoir Road, #01-15, Waterfront Key, Singapore Tel: Fax: Intervale Parkway Fitchburg, MA U.S.A. CFC /PP-89109/24M/Printed 06/17/USA Simonds No. T , Simonds International Corp. Specifications subject to change without notice. 36