DEPRESSED CENTER WHEELS
|
|
- Doris Charla Benson
- 6 years ago
- Views:
Transcription
1 Norton Company s depressed center wheels are the industry s most advanced line of performance and value products for weld and flame cut grinding, pipe notching and steel and non-steel metal fabrication applications. TYPICAL INDUSTRIES AND APPLICATIONS Storage tank and general metal fabrication Petrochemical maintenance All weld grinding Shipbuilding Foundry notching and removing gates and risers Pipeline - root pass grinding, pipe bevelling and repair M6 NORZON THE ABSOLUTE FORCE WHEELS The world s two most advanced abrasives, NorZon (zirconia alumina) and Norton SG (seeded gel-ceramic aluminum oxide) have been combined to produce NORZON The Absolute Force. This patented performance product outperforms all wheels available today. These superior wheels let you cut faster and smoother all the way to the hub. NORZON The Absolute Force Depressed Center Wheels Patented combination of NorZon/Norton SG grain 50% better cut rate advantage over aluminum oxide Up to 9X the life of aluminum oxide and up to 2X the life of competitive zirconia alumina Excellent performance on all grinding jobs from gray iron to exotic alloys and stainless steel An advanced bond system Free cutting, easy on the operator and machinery Exceptional balance Minimal vibration; no workpiece bouncing Less operator fatigue Unique, patented mini mount for 4-1/2" wheels Up to 30% more wheel life because the hub covers just a small surface area, providing maximum grinding area exposure and usage 700% 500% Abrasive Life and Cut Rate Relative Performance Charts RELATIVE WHEEL LIFE CHART RELATIVE WHEEL CUT RATE CHART 200% 650% 165% 150% 300% 100% NORZON THE ABSOLUTE FORCE 360% COMPETITIVE ZIRCONIA 230% CHARGER 130% GEMINI 100% COMPETITIVE STANDARD ALUMINUM OXIDE 100% 50% NORZON THE ABSOLUTE FORCE 130% 120% 100% 100% COMPETITIVE ZIRCONIA CHARGER GEMINI COMPETITIVE STANDARD ALUMINUM OXIDE
2 CHARGER WHEELS This blended aluminum oxide and zirconia alumina product is the best choice for the customer who wants a superior product at a value price. Charger wheels offer versatile performance on stainless steel and a wide variety of metals. Advanced bond Unique, patented mini mount for 4-1/2" wheels Gemini Fast Cut wheels (made in U.S.A) Gemini Long Life wheels Gemini Aluminum wheels Gemini Masonry wheels Charger Depressed Center Wheels A high percentage of premium NorZon (zirconia alumina) abrasive grain blended with aluminum oxide Unique, patented mini mount for 4-1/2" and 5" wheels Single, optimal-performing specification GEMINI WHEELS This aluminum oxide product sets the industry standard for cut rate and balance at very competitive prices. Gemini Depressed Center Wheels Gemini Stainless Steel wheels - contaminant-free (no iron, sulfur or chlorine) Gemini Stainless 3/32" Thin wheels 2X the life of aluminum oxide wheels Free cutting Effectively grinds a variety of metals from alloys and stainless to gray iron Long life and economical performance/price ratio lowers total cost Up to 30% more wheel life because the hub covers just a small surface area, providing maximum grinding area exposure and usage Easy to recommend and order Free cutting without a reduction in wheel life Maximizes the performance of conventional aluminum oxide abrasive Up to 30% more wheel life because the hub covers just a small surface area leaving more grinding area exposed Re-engineered for quick stock removal on hard materials Excellent life and cut rate on stainless steel and metals Designed to grind aluminum and soft metals without loading No wax or rubber fillers that could cause surface contamination Offered in both coarse and fine grits Specially formulated with silicon carbide (37C) for masonry, concrete and asphalt applications Meet nuclear industry standards Engineered to cut all types of stainless steel and various hard alloys Meet nuclear standards Extra thin for quick cutting action and low kerf loss Engineered for pipe and general cut-off applications M7
3 GLOBAL WHEELS Quality Norton aluminum oxide wheels you can depend on for the results you need grinding alloys, steels and ferrous metals. Ideal where low initial cost is important. Global Depressed Center Wheels Manufactured to ANSI standards in Norton plants worldwide Resin bond Versatile Low initial cost per wheel Consistent quality, wheel-to-wheel Cool, free cutting Excellent results on stainless steels, alloys and ferrous metals Ideal for on-site and small unit jobs M8 AVOS TYPE 29 WHEELS AVOS - Allows View of Surface - Type 29 depressed center wheels join Norton Company's revolutionary system of products for right angle grinders that let you see the surface while grinding. These new, patented wheels produce superior surface finishes and complete work quicker - with more accuracy. AVOS Depressed Center Wheels - TYPE 29 Ideal for grinding / blending Innovative shape and patented slot design Provide complete vision of the grinding zone Operator can grind more accurately with less re-work Allow interrupted cut which reduces heat on workpiece Uniquely patterned face Cooler operating; prevents loading Type 29 shape - used at a 15-degree angle Shallow grinding angle permits larger contact area with less gouging of workpiece
4 BLENDING / FINISHING WHEELS GEMINI FLEXIBLE WHEELS These newly-formulated Gemini Flexible wheels are specifically designed for blending and finishing a wide variety of materials. Gemini Flexible Wheels Improved formulation Flexible Available in 36 grit Available in 60 grit Better blending, finishing and polishing of stainless steel, structural steel, cast iron welds and burrs Cool cutting; leaves no burn marks Meets nuclear industry standards Excellent control of finish quality and removal rate in light stock removal applications Ideal for light stock removal Designed for finishing applications COTTON FIBER BFR2 WHEELS The unique cotton fiber and abrasive blend found in BFR2 wheels make these some of the most versatile metal removal and finishing grinding wheels available. Cotton Fiber BFR2 Wheels Unique combination of cotton fibers, abrasive and flexible bond material Superior balance Available in 24 and 36 grit Very versatile; ideal for grinding and finishing bronze, aluminum and thin sheet metal Cushion-like action for uniform finishes No vibration or chatter marks 24 grit - ideal for light stock removal/blending Use 36 grit for finishing M9 Tech Tips For maximum performance, run the grinder at the highest possible speed marked on the wheel. Hold your right angle grinder at a: 90 angle with 1/16", 3/32".125" and 1/8" thick discs 30 angle with 1/8" and 1/4" thick grinding discs 15 angle with saucers and Type 29 wheels It is the user s responsibility to refer to and comply with ANSI B
5 SIZE MAX. STD. NORZON THE ABSOLUTE FORCE CHARGER GEMINI/GLOBAL D X T X H RPM PKG. SPEC. UPC NO. UPC NO. SPEC. UPC NO. 1/4" METAL/STEEL - TYPE 27 3 X 3/16 X 3/8 18, GEMINI X 1/4 X 3/8 18, LONG LIFE GEMINI X 3/16 X 3/8 15, GEMINI X 3/16 X 5/8 15, GEMINI X 1/4 X 3/8 15, LONG LIFE GEMINI X 1/4 X 5/8 15, FAST CUT GEMINI FAST CUT LONG LIFE GEMINI GLOBAL A /2 X 3/16 X 7/8 13, LONG LIFE GEMINI /2 X 1/4 X 5/ , FAST CUT GEMINI FAST CUT LONG LIFE GEMINI GLOBAL A /2 X 1/4 X 7/8 13, FAST CUT GEMINI FAST CUT LONG LIFE GEMINI GLOBAL A X 1/4 X 5/ , GLOBAL A X 1/4 X 7/8 12, FAST CUT GEMINI FAST CUT LONG LIFE GEMINI GLOBAL A X 1/4 X 7/8 10, LONG LIFE GEMINI X 1/4 X 5/8-11 8, FAST CUT GEMINI FAST CUT LONG LIFE GEMINI LONG LIFE GLOBAL A X 1/4 X 7/8 8, FAST CUT GEMINI FAST CUT LONG LIFE GEMINI LONG LIFE GLOBAL A X 5/16 X 7/8 8, X 1/4 X 5/8-11 6, FAST CUT GEMINI FAST CUT LONG LIFE GEMINI LONG LIFE GLOBAL A X 1/4 X 7/8 6, FAST CUT GEMINI FAST CUT LONG LIFE GEMINI LONG LIFE GLOBAL A M10 Spec Check WHEEL TYPE APPLICATIONS 1/16", 3/32" Thick Discs Cutting only, where fast cutting and low kerf loss are desired.125" Thick Discs Cutting and cleaning root pass welds 1/8" Thick Discs Cutting-off, notching and light side grinding Fast Cut Grinding Discs Grinding with low horsepower and electric grinders or where low pressure is used Long Life Grinding Discs Grinding with high horsepower machines (3 hp or higher) and heavy pressure; flame cut and other severe applications Pipe Notchers Cutting on the face of the wheel for root pass applications; cleaning weld joints or cutting out weld on pipe repair Foundry Notchers Triple reinforced for grinding steel and dirty/scale-covered castings; removing and cleaning gates and risers Foundry Snaggers Grinding on bottom and face of wheel; cleaning parting lines, pads and slag; smoothing weld seams Hot Weld Grinding Discs Use on red hot welds (800 F 1400 F) Saucers Type 28 Smooth, gouge-free grinding at shallow angles AVOS Type 29 Polishing and blending applications
6 SIZE MAX. STD. NORZON THE ABSOLUTE FORCE CHARGER GEMINI/GLOBAL D X T X H RPM PKG. SPEC. UPC NO. SPEC. UPC NO. SPEC UPC NO. 3/32' GEMINI STAINLESS PIPE - TYPE 27 THIN 4 X 3/32 X 5/8 15, GEMINI STAINLESS /2 X 3/32 X 5/ , GEMINI STAINLESS /2 X 3/32 X 7/8 13, GEMINI STAINLESS X 3/32 X 5/ , GEMINI STAINLESS X 3/32 X 7/8 12, GEMINI STAINLESS X 3/32 X 5/8-11 8, GEMINI STAINLESS X 3/32 X 7/8 8, GEMINI STAINLESS " METAL/STEEL CUTTING - TYPE 27 4 X.125 X 3/8 15, LONG LIFE X.125 X 5/8 15, GLOBAL A /2 X.125 X 5/ , LONG LIFE GEMINI ,580 GLOBAL A /2 X.125 X 7/8 13, LONG LIFE GEMINI GLOBAL A X.125 X 5/ , GLOBAL A X.125 X 7/8 13, LONG LIFE GEMINI GLOBAL A X.125 X 5/8-11 8, LONG LIFE GEMINI GLOBAL A X.125 X 7/8 8, LONG LIFE GEMINI GLOBAL A X.125 X 5/8-11 6, LONG LIFE GEMINI GLOBAL A X.125 X 7/8 6, LONG LIFE GEMINI GLOBAL A /8" METAL/STEEL /LIGHT - TYPE 27 3 X 1/8 X 3/8 18, LONG LIFE GEMINI X 1/8 X 3/8 15, LONG LIFE GEMINI X 1/8 X 5/8 15, LONG LIFE GEMINI /2 X 1/8 X 5/ , LONG LIFE GEMINI /2 X 1/8 X 7/8 13, LONG LIFE GEMINI X 1/8 X 5/ , X 1/8 X 7/8 12, LONG LIFE GEMINI X 1/8 X 7/8 10, GEMINI X 1/8 X 5/8-11 8, LONG LIFE GEMINI X 1/8 X 7/8 8, LONG LIFE GEMINI X 1/8 X 5/8-11 6, LONG LIFE GEMINI X 1/8 X 7/8 6, LONG LIFE GEMINI M11
7 DEPRESSED CENTER SIZE MAX. STD. NORZON THE ABSOLUTE FORCE CHARGER GEMINI D X T X H RPM PKG. SPEC. UPC NO. SPEC. UPC NO. SPEC UPC NO. GEMINI STAINLESS STEEL - TYPE 27 M12 4-1/2 X 1/8 X 5/ , GEMINI STAINLESS /2 X 1/8 X 7/8 13, GEMINI STAINLESS /2 X 1/4 X 5/ , GEMINI STAINLESS /2 X 1/4 X 7/8 13, GEMINI STAINLESS X 1/8 X 7/8 12, GEMINI STAINLESS X 1/4 X 7/8 12, GEMINI STAINLESS X 1/8 X 5/8-11 8, GEMINI STAINLESS X 1/8 X 7/8 8, GEMINI STAINLESS X 1/4 X 5/8-11 8, GEMINI STAINLESS X 1/4 X 7/8 8, GEMINI STAINLESS GEMINI ALUMINUM - TYPE 27 4 X 1/4 X 5/8 15, GEMINI A /2 X 1/8 X 5/ , GEMINI A /2 X 1/8 X 7/8 13, GEMINI A /2 X 1/4 X 5/ , GEMINI A /2 X 1/4 X 7/8 13, GEMINI A X 1/8 X 7/8 12, GEMINI A X 1/4 X 7/8 12, GEMINI A X 1/4 X 5/8-11 8, GEMINI A GEMINI A X 1/4 X 7/8 8, GEMINI A X 1/4 X 5/8-11 6, GEMINI A GEMINI MASONRY - TYPE /2 X 1/4 X 7/8 13, GEMINI MASONRY C X 1/4 X 5/8-11 8, GEMINI MASONRY C X 1/4 X 5/8-11 6, GEMINI MASONRY C HOT WELD - TYPE 27 7 X 1/4 X 5/8-11 8, X 1/4 X 7/8 6, FOUNDRY - TYPE 27 7 X 1/8 X 5/8-11 8, X 1/8 X 7/8 8, X 1/4 X 5/8-11 8, X 1/8 X 5/8-11 6, X 1/8 X 7/8 6, X 1/4 X 5/8-11 6, X 1/4 X 7/8 6, PIPE - TYPE 27 7 X 1/8 X 5/8-11 8, X 1/8 X 5/8-11 6,
8 DEPRESSED CENTER SIZE MAX. STD. NORZON THE ABSOLUTE FORCE CHARGER GEMINI D X T X H RPM PKG. SPEC. UPC NO. SPEC. UPC NO. SPEC UPC NO. SAUCER - TYPE 28 SAUCER 7 X 1/4 X 5/8-11 8, GEMINI X 1/4 X 7/8 8, GEMINI X 1/4 X 5/8-11 6, GEMINI X 1/4 X 7/8 6, GEMINI /8" AVOS /BLENDING - TYPE /2 X 1/8 X 7/8 13, AVOS A /2 X 1/8 X 7/8 13, AVOS A /2 X 1/8 X 7/8 13, AVOS A46 ALUM X 1/8 X 7/8 12, AVOS A X 1/8 X 7/8 12, AVOS A X 1/8 X 7/8 12, AVOS A46 ALUM /8" GEMINI FLEXIBLE BLENDING/FINISHING - TYPE 27 4 X 1/8 X 5/8 13, GEMINI FLEXIBLE A GEMINI FLEXIBLE A /2 X 1/8 X 5/ , GEMINI FLEXIBLE A GEMINI FLEXIBLE A /2 X 1/8 X 7/8 12, GEMINI FLEXIBLE A GEMINI FLEXIBLE A X 1/8 X 5/8-11 7, GEMINI FLEXIBLE A GEMINI FLEXIBLE A X 1/8 X 7/8 7, GEMINI FLEXIBLE A GEMINI FLEXIBLE A X 1/8 X 7/8 6, GEMINI FLEXIBLE A COTTON FIBER WHEELS - BFR2 POLISHING - TYPE /2 X 1/4 X 7/8 12, A24-KBFR X 1/4 X 5/8-11 6, A24-KBFR A36-HBFR X 1/4 X 7/8 6, A24-KBFR A36-HBFR M13 NORTON DEPRESSED CENTER ADAPTER KITS NO. 110, 112 AND 114 Reusable adapter kits contain everything you need to mount depressed center discs and saucer wheels with 7/8" and 5/8" center holes on to portable right angle or vertical shaft grinders. Adapter hubs are threaded for mounting on to standard 5/8"-11 NCRH spindles. KIT NO. WHEEL DIAMETER WHEEL THICKNESS UPC NO /2" and 5" 1/16" thru 3/16" /4" " thru 9" 1/16" thru 1/4"
ZA24R. Brill-Tex A30P A46Q WA24S HP INOX Free Grind A30Q A36O WA24R, SRT24. HP Aluminum Specialist A24ALU A30Q
Carborundum DEPRESSED CENTER WHEELS TYPE-TO-APPLICATION RECOMMENDATION GUIDE Wheel Type Type 27 Applications.045", 1/16" and 3/32" Thick (Type 27/42) Cutting only, where fast cutting and low kerf loss
More informationIndustries: Specially formulated wheel treatment (#5 wood resin) Larger diameter spindle Precise dimensional tolerances. Norton Tradename: Abrasive:
Category Definition Resin bond, vitrified bond, center lap, and cotton fiber mounted points are available in a wide range of shapes. Industries: Abrasive Grain: Shape : Aerospace Tool and Die Construction
More informationCATEGORY DEFINITION. SHAPE AVAILABILITY: A, B, and W COTTON FIBER MOUNTED POINTS GOOD FOR BLENDING AND POLISHING GOOD
CATEGORY DEFINITION Resin bond, vitrified bond, center lap, and cotton fiber mounted points are available in a wide range of shapes. INDUSTRIES: Aerospace Tool and Die Construction Metal Fabrication Automotive
More informationDEPRESSED CENTER WHEELS
4 The Norton line of depressed center wheels has products for every right angle grinder application: NorZon Plus provide the industry's highest productivity; Charger Plus give great performance and Gemini
More informationDEPRESSED CENTRE DISCS THIN WHEELS PRODUCT OFFERINGS END USER INDUSTRIES COMMON MACHINES
SpitFire DCD from Grindwell Norton is India's largest selling brand of DCD's and is easily the industry's best line of performance and value. PRODUCT OFFERINGS Zirkon Depressed Centre Disc for premium
More informationGRINDING. Grinding Wheels
Grinding Wheels GRINDING Industry leading grinding wheels, burrs and points from Walter are manufactured with productivity in mind and under the most stringent quality control standards. Grain, bond and
More informationALWAYS A WINNING HAND
ALWAYS A WINNING HAND NORTON ABRASIVES AND TOOLS An operator s and production foreman s perfect tool: our new Norton pneumatic die grinder quickly and comfortably accomplishes many portable applications
More informationFor the Professional/Contractor Flap Discs for Angle Grinders
Flap Discs for Angle Grinders Vortec Abrasive Pro Coated Abrasive Flap Discs save both time and money! No need to switch from a Type 27 grinding wheel to a resin fiber disc because flap discs grind and
More informationMACHINES USED CATEGORY DEFINITION GRIT RANGE: ABRASIVE GRAIN: Ceramic Alumina/Aluminum Oxide Blend, Aluminum Oxide
CATEGORY DEFINITION Flap wheels are an ideal choice for a wide variety of blending, deburring and finishing applications common in the metal fabrication, welding and polishing industries. Flap wheels are
More informationABRASIVE GRAIN PERFORMANCE PROFESSIONAL SERIES SIZE GRIT DENSITY SERIES STOCK STATUS MAX RPM BOX QTY CARTON QTY T27 PART# T29 PART# MSRP
FLAP DISCS - ALUMINA W/ GRINDING AID & POLYCOTTON BACKING Our zirconia flap discs are phenolic resin bonded to a reinforced fiberglass backing that wears with the abrasive flaps. Multiple layers of poly-cotton
More informationSMALL DIAMETER WHEELS
SMALL DIAMETER WHEELS CUTTING & SNAGGING WHEELS FOR DIE GRINDERS Get the most demanding jobs done right and done fast. 800.835.9999 / weilerabrasives.com SELECTING THE RIGHT WHEEL MAX PERFORMANCE SUPERIOR
More informationMACHINES USED CATEGORY DEFINITION GRIT RANGE: ABRASIVE GRAIN:
CATEGORY DEFINITION Flap wheels are an ideal choice for a wide variety of blending, deburring and finishing applications common in the metal fabrication, welding and polishing industries. Flap wheels are
More informationCATEGORY DEFINITION APPLICATIONS: SIZE RANGE: GRIT RANGE: ABRASIVE GRAIN: Ceramic Alumina, Zirconia Alumina, Aluminum Oxide,
CATEGORY DEFINITION Flap discs are versatile grinding and finishing tools, consisting of three main components: a backing plate, adhesive, and abrasive cloth flaps. The rectangular flaps are overlapped
More informationTools & Compounds ABRASIVE PRODUCTS. We stock safety goggles, gloves, and face shields as well as many other items of safety equipment
DEPRESSED CENTER GRINDING WHEELS For Grinding Only Spin-On Spin-On DIMENSIONS MAX METAL, STAINLESS CONCRETE Box/ Dia.xThk.xArbor RPM Fast Grind Heavy Duty Heavy Duty Crt. A30S A24/30T C24/30P Qty. 3"x1/4"x3/8"
More informationTHE CLEAR PATH TO SUCCESS BEGINS WITH PARTNERSHIPS.
SMART SOLUTION THE CLEAR PATH TO SUCCESS BEGINS WITH PARTNERSHIPS. Every day, businesses find clearer paths to success by partnering with Weiler. Together, we can evaluate your operation, identify opportunities
More informationEngineered Metalworking Solutions. 3M Industrial Products for Metalworking 2017 Edition Digital Version
Engineered Metalworking Solutions 3M Industrial Products for Metalworking 2017 Edition Digital Version 3M innovations for every part of the metalworking industry. For over 100 years, 3M has designed solutions
More informationHI-CUT - Steel. CUMISTAR - Stainless Steel ZIRCONIA. Depressed Centre Grinding Wheels - Type 27
MADRAS INDIA. Depressed Centre Grinding Wheels - Type 2 HI-CUT - Steel Universal grinding wheel for all metal working; High performance wheels suited for weld and edge grinding 5 5 5 2 5 2 Type 2 5 CUMISTAR
More information3M Cubitron II Metalworking Belt 984F (cont.)
3M Cubitron II Belts 3M Cubitron II Metalworking Belt 984F Made with revolutionary 3M precision shaped abrasive grain technology YF wt. backing Average up to 30% faster cutting on hard-to-grind metals
More informationthe pearl maxidisc system
Distributed by: BEST MATERIALS Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.bestmaterials.com Email: Sales@BestMaterials.com the pearl maxidisc system CHOOSE THE MAXIDISC THAT IS RIGHT FOR YOU!
More informationGrind-O-Flex. Wheels FLAP WHEELS
Grind-O-Flex Wheels FLAP WHEELS From large Grind-O-Flex wheels 16 in diameter to Micro-Mini wheels 3/8 diameter, Merit Abrasives has the flap wheel for your application. Merit Grind-O-Flex flap wheels
More informationFLOOR CARE. NORTON BLUEFIRE (R831 Cloth) UPC Grit Min Pkg Case
Floor sanding belts FLOOR CARE Choose our 100% Norton Durite silicon carbide abrasive with tough X-weight cotton backing for quality cut and low initial cost. Or, try the Norton Blue Fire for improved
More informationHIGH PRODUCTIVITY MECHANICAL SOLUTIONS
HIGH PRODUCTIVITY MECHANICAL SOLUTIONS WALTER SURFACE TECHNOLOGIES THERE'S GOOD, THERE'S BETTER, AND THERE'S... At WALTER Surface Technologies, our purpose is to contribute to our customers' success by
More informationThe right choice. 3M Abrasives for Right-Angle Systems
The right choice. 3M Abrasives for Right-Angle Systems Cut, grind, finish and more... with a world-class abrasive system that helps you work smarter, finish faster! 1 For speed, long life and ease of use,
More informationCATALOG #8716 CONSTRUCTION DISTRIBUTION MARKET FLOOR CARE PRODUCTS DIAMOND COATED NON-WOVEN ALL THE MUSCLE YOU NEED
CATALOG #8716 CONSTRUCTION DISTRIBUTION MARKET FLOOR CARE PRODUCTS DIAMOND COATED NON-WOVEN ALL THE MUSCLE YOU NEED COARSE FLOOR POLISHING PADS The coarse diamond maintenance pad is perfect for cleaning
More information3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to. grind. It s grinding reinvented. Featuring. cut & grind wheels
3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to grind. It s grinding reinvented. Featuring NEW cubitron ii cut & grind wheels Grinding Reinvented 3M TM Cubitron TM II bonded abrasive
More informationpremium aluminum oxide flap wheels unmounted metal hub. Interleaf flap Wheels
premium aluminum oxide flap s unmounted metal hub size arbor 40 60 80 120 150 180 240 320 4" x 1" 5/8" 40836 43301 43302 43304 43306 43308 43309 5 4" x 1-1/2" 5/8" 41079 43351 43352 43353 43354 43355 43356
More informationABRASIVE CUTTING & GRINDING DISCS
97 ABRASIVE CUTTING & GRINDING DISCS ABRASIVE CUTTING & GRINDING DISCS STEEL & INOX STEEL STONE STEEL & INOX Flap discs 98 angled FLAP DISC steel & inox DESCRIPTION ; Versatile grinding and finishing tool.
More information3M Abrasive Systems. Metalworking Application Guide. Advanced Metalworking. with 3M support
3M Abrasive Systems Metalworking Application Guide Advanced Metalworking with 3M support 3 Product symbols SS MS Stainless Steel Mild Steel Aluminium Grinding Aid High Pressure Medium Pressure Alumina
More information3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED.
3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED. 13020160.indd 1 2/8/13 9:46 PM GRINDING REINVENTED 3MTM CubitronTM II bonded abrasive grinding and
More information3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions
3M Industrial Products Abrasives and Power Tools for Welders Welding Solutions What s New for2011 3 4 1 2 5 6 1 2 3 3M Cubitron II Fibre Discs 987C The coolest way to increase productivity. If you work
More informationR A S IVE P R O D U C T S
Volume 3 Global Abrasive Products, Inc. is pleased to provide you with our new full-line catalog. GAP s core values center on service, quality, competitiveness, and product breadth. As well, we have put
More informationCORRECT HANDLING OF FLEXIBLE ABRASIVES
L E T T H E S P CONTENTS Page III, IV V - VII CORRECT HANDLING OF FLEXIBLE ABRASIVES OTHER ACTIVITIES 2, 3 GRINDING MACHINES AND STANDARD TYPES OF FLEXIBLE ABRASIVES 4, 5 WHEEL LABEL MARKINGS 6, 7 USE
More informationGET WIRED FOR SUCCESS WITH NEW NORTON WIRE BRUSHES
GET D FOR SUCCESS WITH NEW BRUSHES When you need the perfect low-impact solution for refining surfaces without removing any base material, try our new line of Norton wire brushes. This new, economically
More informationABRASIVE FINISHING POLISHING
ABRASIVE FINISHING POLISHING CATALOG 2013 CATALOG 2013 North America Version INDEX PAGE: NEW 2013 FLAP DISCS 8-23 CHANGE DISCS & PSA DISCS 24-28 CARTRIDGE ROLLS 29-31 MOUNTED FLAP WHEELS 32-39 FLAP BANDS
More informationAbrasive Products Catalog
Merit Abrasive Products Catalog 2009 2010 Abrasive Products Catalog 2009 2010 WE KNOW ABRASIVES www.meritabrasives.com How To Order Merit Abrasives Call Toll-free 1-800-231-4154 Business Hours: 7:00 AM
More information3M Abrasives.
3M Abrasives. www.3m.com.au 2 3M Abrasives Cleaning Scotch-Brite Clean and Strip Discs (Depressed Centre) Scotch-Brite Clean and Strip Discs (Depressed Centre) offer you a quick and simple solution. Clean
More informationPFERD cut-off wheels Forever better
PFER cut-off wheels Forever better STEEL STEEL + INOX INOX TRUST BLUE Performance upgrade 2018: Product range improvements and additions The right choice for everyone Optimized design for a simplified
More informationAngle & Vertical Grinders
Angle & Vertical Grinders Lightweight aluminium housing to help reduce operator fatique. Designed to handle a variety of applications from fine deburring to heavy grinding. Equipped for Type 27 depressed
More informationDiamond Tools For The Stone and Construction Industry
Diamond Tools For The Stone and Construction Industry Globally competitive "Industrial" & "Professional" grade tools with advanced technology, superior inputs, and world class manufacturing process. DIAMOND
More informationMICHIGAN PNEUMATIC TOOL
MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders
More informationGrinding and. Cutting Wheels
Grinding and Cutting Wheels General Information Maximum operating speed The maximum operating speed [m/s] is shown on the product labels and product packs by a colour bar in accordance with the specifications
More information3M Flap Disc Selection Guide Select Flap Discs for extended life and single-step grinding/blending on all types of metals.
offer an unbeatable system for grinding and blending in one easy step. The construction wears away, exposing fresh mineral to extend disc life and provide consistent cut rates. Great for weld grinding,
More informationONTENTS. CONTENTS Page CORRECT HANDLING OF GRINDING WHEELS
C O M E T L E T T H E S P A R K S F L Y ONTENTS CONTENTS Page III, IV V - VII CORRECT HANDLING OF GRINDING WHEELS OTHER ACTIVITIES 2, 3 GRINDING MACHINES AND STANDARD TYPES OF ABRASIVES 4, 5 WHEEL LABEL
More informationFLOOR SANDING PRODUCTS
10/7/2010 We have over 2,200 products in our online store. These pages only cover: FLOOR SANDING PRODUCTS Prices are Subject to change without notice. The website always has current pricing. Abrasives4sale.com
More informationModel. Reach into areas as small as 3/8". Model. Max. Air Flow SCFM (L/Min)
The Dynafile Original The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and
More informationEngineering Solutions With Coated Abrasive Technology
Engineering Solutions With Coated Abrasive Technology Engineered Abrasives Business Norton Company May20, 1999 Update TRADITIONAL METHOD OF CHOOSING AN ABRASIVE: Customer s Performance Criteria Manufacturer
More informationNEW! BETTER. FASTER. EASIER. High-performance abrasives to meet your cutting, grinding and blending needs
NEW! BETTER. FASTER. EASIER. High-performance abrasives to meet your cutting, grinding and blending needs INTRODUCING OUR NEW LINE OF HIGH-PERFORMANCE ABRASIVES NEW! THE TOUGHEST JOBS JUST GOT EASIER Air
More informationThe right choice. 3M Abrasives for Right-Angle Systems
The right choice. 3M Abrasives for Right-Angle Systems Cut, grind, finish and more... with a world-class abrasive system that helps you work smarter, finish faster! 1 Choose the right disc for the job.
More informationINNOVATIVE SOLUTIONS FOR THE METAL WORKING INDUSTRY CUTTING GRINDING BLENDING WELDING SANDING FINISHING BRUSHING TOOLING
20 14 INNOVATIVE SOLUTIONS FOR THE METAL WORKING INDUSTRY CUTTING GRINDING BLENDING WELDING SANDING FINISHING BRUSHING TOOLING New 2014 ZIP ONE TM type 27 With the same ultra-thin design as the current
More informationWelcome to Evolution Resources LLC. We represent a VSM & 3M authorized distributor.
Welcome to Evolution Resources LLC. We represent a VSM & 3M authorized distributor. We supply a comprehensive range of coated abrasives products. Our product range is extensive covering discs, belts, wheels,
More informationMachine Deals. The Complete 3M System: The Right Machine + The Right Abrasive + The Right Accessory = Outstanding Result
Machine Deals. Industries that work with metal face many different demands but they all share the same needs to raise quality levels and reduce production times and costs whilst achieving demanding standards.
More informationLet our professional customer service and product selection improve your bottom line.
We offer a complete line of diamond tools to suit every cutting need, engineered and designed to make the job easier. Let our professional customer service and product selection improve your bottom line.
More informationHigh Performance. Mini Grind-O-Flex Wheels HIGH PERFORMANCE MINI GRIND-O-FLEX QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Quick-Change
GRIND-O-FLEX IMPROVED High Performance QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Wheels X 1/4-20 THD. Mini Grind-O-Flex Quick-Change The Mini Grind-O-Flex is designed for polishing and grinding intricate
More informationAir Carbon Arc Gouging Torches & Equipment; Slice Exothermic Cutting Systems. Gouging & Cutting Products & Accessories
Air Carbon Arc Gouging Torches & Equipment; Slice Exothermic Cutting Systems Gouging & Cutting Products & Accessories Gouging & Cutting Products & Accessories EXTREME Air Carbon Arc Gouging Torches Angle-Arc
More informationFINISHING. Finishing Index. Sanders Polishers Finishing Accessories
Finishing Index Sanders................... 33-34 Polishers...................... 34 Finishing Accessories........ 35-38 ACCESSORIES SPECIALTY PERCUSSIVE FINISHING ABRASIVE ASSEMBLY DRILLS The Best Way
More informationIntroduction. Innovation Continuous investment in customer and application driven development of new products, giving you effective solutions.
Abrasives Catalog 1 Introduction We are committed to being the leading manufacturer and supplier of speciality abrasives and carbide burs in the world. Through continuous development of new and innovative
More informationCalumet Abrasives Product Catalog
Calumet Abrasives Product Catalog Our Abrasive Cutting Laboratory is the core of our business and what sets us apart from commodity based manufacturers. Our cutting wheel designs are evaluated on a regular
More informationDIAMOND & CBN WHEELS. Diamond & CBN Grinding Wheels SUPER ABRASIVES TYPICAL APPLICATIONS NORTON DIAMOND & CBN WHEELS
Diamond & CBN Wheels Diamond and CBN (Cubic Boron Nitride) grinding wheels are available in a wide range of Resin, Vitrified and Metal bonds. Diamond and CBN wheels are designed to grind very hard materials
More informationAutomotiveabrasiveproducts
Automotiveabrasiveproducts ISO 9000 Commitment for Quality With more than 80 years of integrated manufacturing experience, FANDELI has been a major producer of high quality sandpaper serving automotive
More informationDynabrade Portable Abrasive Belt Tools
Dynabrade Portable Abrasive Belt Tools Grind, Deburr, Blend, Clean, Polish and Finish Reorder No. D08.02R We offer a diverse line of products to help you get the job done. With expert knowledge, service
More informationBurr-Rx Brushes. Introducing the most aggressive line of compliant brushing tools ever! New Filament Cuts 400% Faster For Minimum Cycle Times!
~Ceramic Filament Brochure.qxd 4/4/08 9:51 AM Page 1 Burr-Rx es Introducing the most aggressive line of compliant brushing tools ever! Mounts Directly onto Shell Mill Holder! New Filament Cuts 400% Faster
More informationABRASIVES BRUSHING BRUSHING
ABRASIVES BRUSHING BRUSHING 405 CRIMPED WIRE WHEEL BRUSHES High Performance (for Bench Grinders) JET s high performance crimped wire wheel brushes have set the standard in Canada as the best performing
More informationAUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY
AUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY BURS Table of contents Burs Series Number Page Number Cylindrical with no end cut... SA... 05 Cylindrical with end cut... SB... 05 Cylindrical
More informationPencil Grinders hp, 0.4 hp Die Grinders hp Die Grinders hp Die Grinders...101
Pencil Grinders...92 0.33 hp, 0.4 hp Die Grinders...95 0.4 hp Die Grinders...96 0.5 hp Die Grinders...101 0.55 hp Die Grinder...104 0.7 hp Die Grinders...105 1.0 hp Die Grinders...107 92 Pencil Grinders
More informationDynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16
Dynafile...8 Dynafile II...11.4 hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile III...18 Dynabelter...22 Dynangle...25 Dynangle II...26 Take-About Sander...27
More information3M 314D Utility Cloth Rolls & Sheets. A resin bond J weight flexible cloth product Used for all maintenance and general workshop applications
ABRASIVES Section Page Rolls, Sheets & Hand Pads 8-13 Sanding Belts 13-15 Sanding 16 Spirabands 17 Discs & Backing Pads 17-25 Flap Discs 25-30 Flap Wheels 30-31 Cutting Discs 32-36 Cutting & Grinding Discs
More informationABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495)
ABRASIVE BELT TOOLS APTOOL.RU Phone: +7 (495) 723-19-55 ABRASIVE BELT TOOLS The Dynafile Original Air-Powered Abrasive Belt Tool The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts
More informationImproving. Your. Competitive Edge. 3M Industrial Business Industrial Products for Metalworking Edition
3M Industrial Business Industrial Products for Metalworking 2007 Edition Improving Your Competitive Edge. See added section on NEW 3M Bonded Superabrasives! What s New for 2007 NEW! 3M is proud to add
More informationSANDERS AND ABRASIVES
22-44 PLUS DRUM SANDER Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload Patented conveyor belt
More informationAUTOMOTIVE AFTERMARKET REFINISHING PRODUCTS CATALOG 330 REVOLUTIONIZING REFINISHING.
AUTOMOTIVE AFTERMARKET REFINISHING PRODUCTS CATALOG 330 2009 2010 REVOLUTIONIZING REFINISHING www.nortonautomotive.com CONTENTS NOTHING SAYS NORTON LIKE THE END RESULT From the drawing board to the body
More informationWE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS
WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS Rebel series grinders and sanders are powerful tools designed to overcome
More informationVacuum Models Central Vacuum Pencil Grinder hp Vacuum Die Grinders hp Vacuum Die Grinders hp Vacuum Die Grinders...
Non-Vacuum s Pencil Grinders...47 Quick-Change Pencil Grinder...49.4 hp Die Grinders...52.5 hp Die Grinders...59.55 hp Die Grinder...62.7 hp Die Grinders...63 1 hp Die Grinders...67 Vacuum s Central Vacuum
More information3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by:
3M Abrasive Systems Random Orbital Abrasive Disc Portfolio Sanding & Finishing Solutions! cs NsEivW e Dis Abra see inside Distributed by: The 3M Value The RIGHT Abrasives NEW Products NEW! Look for this
More informationAccessory Items ACCESSORIES GRINDING
Accessory Items The convenience of one stop shopping is provided through the selection of accessories offered by United Abrasives to complement and match our product offering. All of the accessories carried
More informationSaint-Gobain Abrasives South-East Asia ABRASIVE SOLUTIONS
Saint-Gobain Abrasives South-East Asia ABRASIVE SOLUTIONS SAINT-GOBAIN ABRASIVES The world s leading abrasives manufacturer Saint-Gobain Abrasives, the world s leading manufacturer of abrasives, offers
More informationBONDED BONDED SANDING FLAP DISCS FLAP DISCS BONDED DIAMOND ABRASIVES
DIAMOND BONDED FLAP DISCS FLAP DISCS SANDING BONDED BONDED ABRASIVES www..co.uk PERFORMANCE SO GOOD IT RAISES YOURS DEMAND DeWALT ABRASIVES All of our EXTREME rated bonded abrasives comprise of: A high
More informationOEM APPROVED AND USED
OEM APPROVED AND USED Pro Form's Pliogrip Truck Line epoxy and urethane adhesives are part of a complete system designed for the most demanding bonding applications in the truck refinish industry. www.proformproducts.com
More informationSTOCK ABRASIVE PRODUCTS FOR THE PROFESSIONAL FLOOR SANDING MARKET
STOCK ABRASIVE PRODUCTS FOR THE PROFESSIONAL FLOOR SANDING MARKET EFFECTIVE I 2016 NEW PRODUCT SPOTLIGHT BELTS & ROLLS count on norton WHEN THE GAME IS ON THE LINE! THE MOST VALUABLE PRODUCT IN THE SPORT
More informationAbout Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
More information3M Abrasive Systems. Metalworking Application Guide. Advanced Metalworking. with 3M support
3M Abrasive Systems Metalworking Application Guide Advanced Metalworking with 3M support 3 Product symbols MS Stainless Steel Mild Steel Aluminium Grinding Aid High Pressure Medium Pressure Alumina Zirconia
More informationSanders, Buffers & Polishers Introduction
Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc
More informationShaping. the future. Introducing. 3M Cubitron II Abrasive Belts NEW! 994F and 997F for high pressure applications
NEW! 3M Cubitron II Abrasive Belts Introducing 994F and 997F for high pressure applications Shaping the future Revolutionary shaped abrasive grain grinds cooler and dramatically faster. Now engineered
More informationFor maximum material removal with minimum effort, choose the best tool.
RediPower For maximum material removal with minimum effort, choose the best tool. How to select your Grinder Collet grinders Choose your tool, then your accessory: carbide burrs, mounted points, brushes,
More informationRAPID SOLUTIONS 2-3 TIMES LONGER LIFE PROCESS STAGE ELIMINATION REDUCED REWORK
RAPID SOLUTIONS for surface conditioning NOn-WOVEN NON-WOVEN DISCS WITH: 2-3 TIMES LONGER LIFE PROCESS STAGE ELIMINATION REDUCED REWORK RAPID CONDITIONING SOLUTIONS BETTER 2x 15%OVER PERFORMANCE OVER COMPETITORS
More informationReorder No. EUR11.12
Reorder No. EUR11.12 CATALOGUE & PRICE LIST FOR DISTRIBUTORS REFINISH SOLUTIONS AUTOMOTIVE AFTERMARKET 2016 RESHAPING YOUR WORLD WITH WORLDWIDE MARKET LEADERSHIP WORLD CLASS PRODUCT INNOVATIONS CUTTING
More informationSpecialties. pg. 2 pg. 3 pg. 4. pg. 5 pg. 6 pg. 6. pg. 7 pg. 7 pg. 8
Specialties Abrasives pg. 2 pg. 3 pg. 4 pg. 5 pg. 6 pg. 6 pg. 7 pg. 7 pg. 8 SANDING SHEETS 9" x 11" CSA Stearated Sheets Aluminum Oxide, A Weight, Open Coat, Stearated Aluminum oxide grain treated with
More informationPortable Air Tools for the Value-Minded Professional
Reorder No. D05.09 Red Portable Air Tools for the Value-Minded Professional Includes Abrasive Belt Tools, Die Grinders, Disc Sanders, Buffers and More DynaZip Air Tools (See Page 2) 18255 DynaZip Air Tool
More informationSpecialty Abrasives. for use on STAINLESS STEEL ALUMINUM EXOTIC METALS MILD STEEL Product Catalog. Grind Debur Blend Finish
Specialty Abrasives for use on STAINLESS STEEL ALUMINUM EXOTIC METALS MILD STEEL 2011-2012 Product Catalog Grind Debur Blend Finish We Promise... QUALITY RELIABILITY ON-TIME DELIVERY SERVICE PERFORMANCE
More informationPalm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital...
Dynorbital-Spirit...46 HiVac Dynorbital-Spirit...48 Mesh Abrasive Systems...49 Dynorbital Supreme...50 Two-Hand Dynorbital...52 11" Dia. Dynorbital...53 Palm-Style Mini-Orbital...54 7 Offset Mini-Orbital...55
More informationApplication Guide DISTRIBUTED BY:
DISTRIBUTED BY: Application Guide Meguiar s International Headquarters: Suite 6-7, 20/F Marina House, 68 Hing Man Street, Shaukeiwan, Hong Kong Phone: 852-2967-0202 Fax: 852-2967-6968 MV-81 MV-82 MV-83
More informationMaterial Removal Tools
Material Removal Tools mdi - Manufacturers Distributor, Inc Phone: (813) 241-4900 Fax: (813) 571 0422 www.dotcosales.com Sales@DotcoSales.com Model Number Index Model Page 10B1200-32 43 10B2500-01 16 10L1000-36
More informationKemet PORTABLE VALVE GRINDING MACHINES
Kemet PORTABLE VALVE GRINDING MACHINES Portable Valve Grinding Machines The range of portable industrial valve grinders offered by Kemet are a patented design concept that are a proven solution for on-site
More informationPREMIUM PROGRAMME CUTTING GRINDING SANDING CLEANING POLISHING FINISHING START WITH DRONCO. FINISH WITH OSBORN.
PREMIUM PROGRAMME 2017 CUTTING GRINDING SANDING CLEANING POLISHING FINISHING START WITH DRONCO. FINISH WITH OSBORN. STARTING AT PDF-PAGE 3 START WITH DRONCO. STARTING AT PDF-PAGE 136 FINISH WITH OSBORN.
More informationFLOOR MACHINE BRUSHES
2375 Button Gwinnett Dr., Suite 300 Doraville, GA 30340 770/446-2429 Office 770/446-2479 Fax sales@betterbrushproducts.com FLOOR MACHINE BRUSHES WE RE BETTER. CLEAN & SIMPLE. Version 201402 Rotary Brush
More informationAir Finishing Tools CP778. Heavy Duty Hi-Speed Sander
Air Finishing Tools Finishing work provides a wide range of challenges and we have a complete line of sanders, buffers and polishers for every application from heavy material removal to fine finishing.
More informationMULTI-AIR PLUS A975 SANDING DISCS
MULTIAIR BACKUP PADS PERFORMANCE OF The innovative MultiAir backup pad design draws dust into a collecting chamber allowing optimal airflow and powerful dust extraction. High performance, high productivity
More informationFINISHING TOUCHES. Force control: The key to successful robotic deburring. by Nathan Herbst, technical service engineer, 3M Abrasive Systems
FINISHING TOUCHES Force control: The key to successful robotic deburring by Nathan Herbst, technical service engineer, 3M Abrasive Systems ntegrating automation into any industry brings challenges. For
More information.4 hp Die Grinders & Disc Sanders
.4 hp Die Grinders & Disc Sanders NEW Lightweight Ergonomic Design! Reorder No. D12.14 Ideal for Rapid Material Removal, Sanding, Deburring, Finishing Right Angle, 7 Offset & Angle-Head s Plus Angle-Head
More informationVELCRO & ADHESIVE BACKED DISCS. Page FLAP DISCS & FLAP WHEELS CUTTING & GRINDING DISCS QUICK CHANGE DISCS. Pages ,173 POLISHING & LAPPING
200 ABRASIVE SHEETS & COILS Pages... 160,161 201 ABRASIVE SPONGES 202 FIBRE BACKED DISCS 203 VELCRO & ADHESIVE BACKED DISCS 204 SANDING BELTS 205 SANDING BANDS & CARTRIDGE ROLLS Page................. 161
More informationINDUSTRIAL. Price List 2017/18
INDUSTRIAL Price List 2017/18 Valid from 1st December 2017 About Mirka Mirka Ltd is a family-owned Finnish company and a world leader in abrasives technology innovation. We offer a complete range of technically
More information