Ring Type. Lever Type. Straight Type. Torque Type. Long Type. 90 Mini Angle Type. 90 Mini Angle Type (Very Small Head) 90 Angle Type.

Transcription

1 ULTRA-PRECISION HIGH TORQUE AIR GRINDER System Chart Model Price Attachment ispeed E0 E0 E00 E000 RE00 IR RE0 IH IG RE0 HG ,000 min - (rpm) Max. ( ) RE0 BMH RE0 MFC-00S.00,000 min - (rpm) Max. ( ) Ring Type Lever Type Straight Type Torque Type Long Type 90 Mini Angle Type e? h? e??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee? g??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee??ee?? Speed Reducer Extension Joint Extension Joint RE00 CN-0.00 / Speed Reducer RO0 RG-0.00 / Speed Reducer RO0 RG-0.00 May be connected between the motor and the attachment as required for increased torque. RE0 MFC-00M.00,000 min - (rpm) Max. ( ) RE0 IC ,000 min - (rpm) Max. ( ) 90 Mini Angle Type (Very Small Head) 90 Angle Type with Chip Air Mechanism,000~0,000 min - (rpm) RO0A IM HES0 HES0 RE0 KC ,000 min - (rpm) Max. ( ) LS0 LS Angle Type with 0 Twist-Free Joint,000~0,000 min - (rpm) RO0 IM LS0 ML LS0 SLS LUSTER (Reciprocating motion) MINI-LUSTER (Reciprocating motion) SWING-LUSTER (Right to Left motion) Air Line kit AL00 AL This air line kit is designed for use with the AFC- foot control, AF00. RE00 HA ,000 min - (rpm) Max. ( ),000 min- (rpm) Max. ( ) Hammer Action Type KBS0 KBS Foot Control AF00 AFC-.00 -p0 : Maximum Allowable Speed, intermittent use. FINE BELT SANDER Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. : Maximum Allowable Speed, continuous use.

2 STANDARD SET STANDARD SET (Ring Type) ispeed E0 E0 E00 E000 HES0 HES0 IR-0 This model incorporates the top seller being used in many applications throughout the world. As well as providing an excellent balance of speed, torque, size and weight, it is capable of dealing with rough or precise work. Furthermore the bur can be replaced with one touch, just by turning the ring. 0,000 min - (rpm) The new ring type IR-0 is the standard attachment for standard set R0-IR. Standard Equipment Model R0-IR Price,0.00 Attachment IR-0 Motor IM-0 Air Grinder (IM-0+IR-0) : pc. Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Air Line Kit (AL-00) : pc. Foot Control (AFC-) : pc. Hose for Piping (K-) ft : pc. Lubricating Oil (K-) : pc. Wrench ( x.) : pc. Pin Wrench (K-) : pcs. L Shaped Wrench : pc. (ARTCO TOOLS) 0 WEST DUARTE ROAD, #E MONROVIA, CA USA 90- Tel: () - Fax: () -00 Toll Free USA Tel: (00) - Fax: (00) -0 info@artcotools.com -p

3 ATTACHMENTS ispeed RE00 ø0." RE00 RING TYPE ATTACHMENT IR-0 IR-0." Perfectly designed for powerful and delicate cutting and grinding, and made slim and light weight for comfortable gripping. Weight :. oz. Simple, no wrench bur replacement. Wrench is not required to exchange the chuck. Standard Size : ø/" (CHH-.), ø. mm (CHH-.) Optional Collets : CHH-[][] are shown in page (-p) Ring Type Attachment Model Standard Accessories Price ø/" (CHH-.), ø. mm (CHH-.) : pc. each Wrench ( x.) : pc. Pin Wrench (K-) : pc. L Shaped Wrench : pc E0 E0 E00 E000 HES0 HES0 RE0 ø0." Lever Type Attachment Model Standard Accessories Price RE0 0." LEVER TYPE ATTACHMENT IH-00 IH-00 Straight Type Attachment." Perfectly designed for powerful and delicate cutting and grinding, and made slim and light weight for comfortable gripping. Weight :.9 oz. Just turn the lever to exchange the bur. Wrench is not required to exchange the chuck. Standard Size : ø/" (CHH-.), ø. mm (CHH-.) Optional Collets : CHH-[][] are shown in page (-p) ø/" (CHH-.), ø. mm (CHH-.) : pc. each Wrench ( x.) : pc. Pin Wrench (K-) : pc Model Standard Accessories Price IG-00 STRAIGHT TYPE ATTACHMENT IG-00." ø/" (NKM-.) : pc Nut (CHN-) : pc. Wrench (9 x 9), ( x ) : pc. each Bar Wrench (PCR-0) : pc. Light weight ergonomically designed with minimal vibration for extended use. High precision NK Micron Collet for maximum tool retention. Weight :.9 oz. Standard Size : ø/" (NKM-.) Optional Collets : NKM-[][] are shown in page (-p).00 -p

4 ATTACHMENTS & ACCESSORIES ispeed E0 E0 E00 E000 HES0 HES0 RE0 0.0" RE0 90 ANGLE ATTACHMENT IC-00 ø0.0"." 90 Angle attachment with ø/" (ø. mm) Collet. Most suitable for polishing flat surfaces, corners and internal surfaces of pipes with paper disk mounted on rubber pad. Reduction Ratio : / Weight :.9 oz. Standard Size : ø/" (CHC-.) Optional Collets : CHC-[][] are shown in page (-p) 0.9" 0,000 min - (rpm) Max. ( ) Please use it together with Speed Reducer. Standard Accessories for IC-00 and KC-00 90º Angle Attachment Model Standard Accessories Price RE0 IC-00 ANGLE ATTACHMENT KC-00 ø0.0"." Ideal for the work at angle, especially corners and deep concaves. Use the motor in reverse rotation for clockwise rotation. Speed Reduction Ratio : / Weight :.9 oz. Standard Size : ø/" (CHC-.) Optional Collets : CHC-[][] are shown in page (-p) 0,000 min - (rpm) Max. ( ) Please use it together with Speed Reducer. º Angle Attachment ø/" (CHC-.) : pc. Standard Accessories : set Chuck Wrench (K-) : pc. Pin Wrench (K-) : pc..00 Model Standard Accessories Price RE0 KC-00 ø/" (CHC-.) : pc. Standard Accessories : set Chuck Wrench (K-) : pc. Pin Wrench (K-) : pc..00 Description Model O.D. Grits Q'ty (Small) RE9 ø 0mm (ø 0.9") _ Rubber Pad (Med) RE9 ø 0mm (ø 0.9") _ (Large) RE9 ø 0mm (ø.") _ LS090 S-0 ø mm (ø 0.") # 0 LS090 S-00 ø mm (ø 0.") # 00 Sandpaper Disk RE0 M-0 ø mm (ø 0.") # 0 RE0 M-00 ø mm (ø 0.") # 00 RE90 L-0 ø mm (ø.") # 0 RE90 L-00 ø mm (ø.") # 00 (IM-0) For the details of above air motor, refer to the following page (-p) Air Line Kit (AL-00) & AFC- (IM-0) For the details of above air motor, refer to the following page (-p) Air Line Kit (AL-00) & AFC- -p Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. : Maximum Allowable Speed, intermittent use. : Maximum Allowable Speed, continuous use.

5 ispeed E0 ATTACHMENTS The Features of LUSTER LS-00.9"." Stroke Range : 0~ mm adjustable by stroke cam The tilt angle of grindstone arbor is adjustable. The grinding surface can be set at any angle between 0 and 0 enabling grinding of bottom, right, left and top surfaces without moving the machine itself. E0 E00 E000 HES0 HES0 High Power LUSTER (LS-00) is a powerful reciprocating stroke polisher. Reciprocating Stroke : 0~,00 times/min. Fully adjustable. Ultra-Precision Grinder All important parts are hardened by heat treatment to provide excellent durability. Designed with comfortable rubber-grip Well balanced, rubber-grip absorbs vibration from reciprocating strokes reducing fatigue and allowing long, continuous operation. The Features of MINI-LUSTER ML- ø0.9"."." Reciprocating Stroke (variable) : Approx 0~,00 times/min. Stroke Range (fixed) : 0. mm. Due to pencil type grip, it is most suitable for polishing narrow grooves, details, etc. Light weight, compact design and minimal vibration keep the hand free from fatigue for long continuous operation. By using the grindstone holder provided, various tools such as oil stone, super stone, diamond files, etc. can be used. (IM-0) (IM-0) For the details of above air motor, refer to the following page (-p) Air Line Kit (AL-00) & AFC- For the details of above air motor, refer to the following page (-p) Weight : lb..99 oz. Max. tool shank diameter ø0.", Screw clamp type. Various types of attachment tools are provided as standard accessories. Reciprocating Motion Miniature Polisher LUSTER Model Standard Accessories Price LS0 LS-00 Standard Accessories : set Allen Wrench ( mm) : pc. Lubrication Oil Lubrication Nozzle for LUSTER.00 Air Line Kit (AL-00) & AFC- Weight :.9 oz. Max. tool shank diameter ø0.", Screw clamp type. Various attachment tools and holders are provided as standard accessories. Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER Attachment Model Stroke Range Standard Accessories Price LS0 ML- 0.mm Standard Accessories : set Allen Wrench (. mm) : pc p

6 ATTACHMENTS The Features of HA-00." ø0." (IM-0) Air Line Kit (AL-00) & AFC- ispeed E0 For the details of above air motor, refer to the following page (-p) E0 E00 E000 HES0 HES0 Stroke speed : ~,000 strokes/min A wide variety of patterns can be produced by varying the spring pressure and hammer speed. Light weight, pencil type grip makes the handpiece very comfortable to hold and easy to use. Adjustable spring pressure. Self lubricating hammer mechanism ensure excellent durability. Weight :. oz. Stroke range : 0. mm Stroke Spring Pressure :.~.N (Ring Adjustment Type) The Features of FINE BELT SANDER KBS-0." Polishing a flat surface Engraving and Ornament Processing Work Hammer Attachment Model Standard Accessories Price RE00 HA-00 Wrench ( x.) : pc. Bar Wrench (K-) : pc. Oil and Oil offer machine Hammer Bit (For replacement) : pcs ,000 min - (rpm) Max. ( ),000 (rpm) Max. ( ) Please use it together with Speed Reducer. min- Hammer Bit to be machined to required shapes (SUS-0, heat treated, approx, HRC0) Product Package Price RE0 pcs./pack 0.00 Polishing a curved surface Belt runs Approx. 0~,00 ft/min Weight :. oz. mm, mm and mm width belts are available. The angle of the belt section is fully adjustable. Exchanging the belt is simply done by lever release. Light-weight, compact, minimal vibration and a small diameter grip design keep the hand free from fatigue for long, continuous operation. When polishing a curved surface, the tension between the front and central pulley can be utilized. When polishing a flat surface or a groove, use the flat part of belt. (IM-0) For the details of above air motor, refer to the following page (-p) Air Line Kit (AL-00) & AFC- FINE BELT SANDER Attachment Model Standard Accessories Price KBS0 KBS-0 mm Belt ( kinds pcs. each) mm Belt ( kinds pcs. each) mm Belt ( kinds pcs. each) Allen Wrench ( mm) : pc p0 Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. : Maximum Allowable Speed, intermittent use. : Maximum Allowable Speed, continuous use.

7 SPEED REDUCER & & ispeed ø0." RO0." SPEED REDUCER RG-0 TORQUE UP TIMES (/ Speed Reducer) The speed is reduced to / but the torque is multiplied by times. Weight :.0 oz. Speed Reducer (/) Model Standard Accessories Price RO0 RG-0 Pin Wrench (K-) : pc..00 ø0." RO0." SPEED REDUCER RG-0 TORQUE UP TIMES (/ Speed Reducer) The speed is reduced to / but the torque is multiplied by times. Weight :. oz. Speed Reducer (/) Model Standard Accessories Price RO0 RG-0 Pin Wrench (K-) : pc..00 E0 E0 E00 E000 HES0 HES0 ø0."."." RE00.9" AL00 PF/.".9"."." EXTENSION JOINT CN-0 (Speed : ) Use air line kit AL-00, AL00 with this foot control. Designed to depress from any direction. Fine adjustment of speed control is possible. Foot Control Model Fit to Price This is a joint to be connected between a motor and an attachment to extend the total length of the attachment. Weight :.9 oz. Extension Joint (Speed : ) Model Standard Accessories Price RE00 CN-0 Pin Wrench (K-) : pc..00 AL-00 This air line kit is designed for use with the AFC- foot control, AF00. Ensures a smooth operation and long life by supplying stable, conditioned air to the air motor. Three functions : air filter, regulator, mist lubricator can also be used to adjust motor speed. Lubricator is specially designed to supply oil to the air motor and spindle. Smart design for setting on floor or wall.." 0.9" 0." 0.9" -ø mm Air Line Kit (For ø mm Hose Filter Mesh μm) Model Standard Equipment Accessories Price AL00 AL-00 Air Filter Air Regulator Air Pressure Gauge Lubricator Air Control Valve (CV-0) Hose for Piping (K-) : ft Bracket Lubricating Oil (K-) : pc..00 AF00 FOOT CONTROL AFC- AA000 SILENCER K-09 By attaching the silencer at the end of exhaust air tubing, the operation noise is extremely reduced. Silencer Model Description Price AF00 AFC- Air Line Kit (AL-00).00 AA000 K-09 Large Silencer (w/metal Fittings).00 -p