MILD STEEL FLATS. Size (mm)
|
|
- Collin Dixon
- 6 years ago
- Views:
Transcription
1 Page 6
2 MILD STEEL FLATS Product Shortname: FL W t Specifications: AS AS (on indent only) JIS G3101-SS400 Range Available: 13 x x x x x x x x x x x x x x x x x x x x x x x x x Designation: Cross Sectional Area = width x thickness = mm 2 = w x t x = kg/m s per Tonne = 1000 = metres kg/m 50 x x x x x x x x x x *100 x x x x x x x x x x *200 x x x x x x x x x x x x x x x x x x x x x x x x *250 x *75 x x x x x x x x x x *150 x x x x x x x *300 x x x x x x x x x x Standard stock length is 6 metres, except for the small 3mm flats (*) which are stocked in 2.4 metre lengths. 13 x 3 are stocked in 4 metre lengths. Other sizes, grades and lengths available on indent. Straightness Tolerance: AS ; 2mm per metre. Page 7
3 Range Available: MILD STEEL SQUARES Product Shortname: FL Specifications: AS AS (billets) BS A JIS G3101-SS400 Designations: Cross Sectional Area = width x thickness = mm 2 metre = A(mm 2 ) x = kg/m s/tonne = 1000 = metres kg/m 10 x x x x x x x x x x x Available on indent. Standard stock length is 6 metres. MILD STEEL ENGINEERING ROUNDS Product Shortname: PB30, PB50, ER Specifications: AS AS/NZS AS/NZS (on indent only) BS A JIS G3101-SS400 Designations: = (Diameter D ) 2 x = kg/m By diameter s per Tonne = 1000 = metres kg/m Range Available: Available on indent. Standard stock length is 6 metres. Engineering rounds can be cut to length on request. See the Special Steel Book for more information. Straightness Tolerance AS mm per metre. D
4 MILD STEEL ANGLES Product Shortname: ANG Specifications: AS AS (on indent only) JIS G3101-SS400 Designations: = area of section (m 2 ) x = kg/m s per Tonne = 1000 = metres kg/m Range Available: EQUAL ANGLES 20 x 20 x x 50 x x 90 x x 25 x x 50 x x 100 x x 25 x x 65 x x 100 x x 30 x x 65 x x 100 x x 30 x x 65 x x 100 x x 40 x x 75 x x 125 x x 40 x x 75 x x 150 x x 50 x x 75 x x 150 x x 50 x x 90 x x 200 x UNEQUAL ANGLES 65 x 50 x x 75 x x 90 x x 50 x x 75 x x 90 x x 50 x x 75 x x 100 x x 75 x x 75 x x 100 x x 75 x x 75 x Standard stock length is 6m, 9m for larger angles. Straightness Tolerance AS mm per metre. Other sizes and lengths available on indent. Page 9
5 HOT-DIP GALVANIZED FLATS Product Shortname: GFL Specifications: TS100 Brand Name: Duragal Grade and Mechanical Properties: Actual Thickness Grade t mm Minimum Yield Stress MPa Minimum Tensile Strength MPa t 6.0 C400LO t > 6.0 C350LO Range Available: Mass per Mass per Mass per 50 x x x x x x x x x x x x x x x x x x x x x x Available on indent Standard stock length is 6m. Other lengths available on indent Page 10
6 Range Available: HOT-DIP GALVANIZED ANGLES Product Shortname: GANG Specifications: TS100 Brand Name: Duragal Grade and Mechanical Properties: Actual Thickness t mm Grade Minimum Yield Stress MPa Minimum Tensile Strength MPa t 6.0 C450LO t > 6.0 C400LO EQUAL ANGLES 30 x 30 x x 65 x x 100 x x 40 x x 65 x x 100 x x 40 x x 65 x x 125 x x 45 x x 75 x x 125 x x 45 x x 75 x x 125 x x 50 x x 75 x x 150 x x 50 x x 75 x x 150 x x 50 x x 90 x x 50 x x 90 x UNEQUAL ANGLES 75 x 50 x x 75 x x 100 x x 50 x x 75 x x 100 x x 75 x x 75 x Available on indent Standard stock length is 6m. Other lengths available on indent. Page 11
7 HOT-DIP GALVANIZED CHANNELS Product Shortname: GCH Specifications: TS100 Brand Name: Duragal Grade and Mechanical Properties: Actual Thickness t mm Grade Minimum Yield Stress MPa Minimum Tensile Strength MPa t 6.0 C450LO t > 6.0 C400LO Range Available: Thickness Length Thickness Length Thickness Length 75 x m, 9m 180 x m 250 x m 100 x m 200 x m 300 x m 125 x m 200 x m 300 x m 150 x m 230 x m Available on indent Standard stock lengths listed. Not all lengths listed available in all branches. Other lengths are available on indent. Page 12
8 REINFORCING ROUNDS DEFORMED Product Shortname: Specifications: DB30 - Deformed (Grade 300E) MA (Micro - Alloy) DB50 - Deformed (Grade 500E) MA (Micro - Alloy) RB50 - (Grade 500E) MA (Micro - Alloy) AS/NZS 4671: Grade 300E/500E REIDBAR Standard Range Available: Diameter (D) Grade 300E Grade 500E Reid Bar (black and galv) Available on indent Standard stock length in deformed bar is 6 metres. Reid bar standard stock lengths are 6 metre, 9 metre and 12 metre TIE WIRE Product Shortname: TIEW Specification: 1.6mm available in 50kg coils 2.5mm available in 50kg coils 3.15mm available in 50kg coils Shorter lengths in 1.6mm diameter available on request. Page 13
9 REINFORCING MESH Product Shortname: MESH Specification: Super Ductile Grade 500E (seismic) manufactured to AS/NZS 4671 Designation: Space between wire A x Space between wire B x Gauge t Range Available: Super Ductile Mesh Opening Sheet (A x B x t) Net Cover (m 2 ) approx Gross Sheet Weight (kg) SE62Res 200 x 200 x 6.1mm 5.05 x 2.02m SE x 200 x 6.1mm 5.85 x 2.42m SE x 200 x 7.0mm 5.65 x 2.22m SE x 300 x 7.5mm 6.05 x 2.42m SE73DE 300 x 75 x 300 x 7.5mm 5.00 x 2.27m SE x 200 x 8.0mm 5.65 x 2.22m Hard Drawn Mesh Opening Sheet (A x B x t) Net Cover (m 2 ) approx Gross Sheet Weight (kg) 10m 2 (nominal) 668L 150 x 150 x 4.0mm 4.65 x 1.97m L 150 x 150 x 5.3mm 4.65 x 1.97m L 150 x 150 x 6.3mm 4.65 x 1.97m x 75 x 4.0mm 4.65 x 2.05m x 75 x 5.3mm 4.65 x 2.05m x 75 x 6.3mm 4.65 x 2.05m m 2 (nominal) 665E 150 x 150 x 5.3mm 6.15 x 2.42m E 150 x 150 x 6.3mm 6.15 x 2.42m E 150 x 150 x 7.1mm 6.15 x 2.42m E 150 x 150 x 7.5mm 6.15 x 2.42m x 75 x 5.3mm 4.65 x 2.05m Double Edge* 84/ x 50 x 300 x 5.6mm 4.95 x 2.22m / x 50 x 300 x 7.5mm 4.95 x 2.22m * Note: outside wires on 84/10 is 4.0mm, and on 147/10 is 5.0mm. Page 14
Structural Sections. Page 15
Page 15 MILD STEEL CHANNELS Product Shortname: CH AS 3679-300 AS 3679-350 (on indent only) BS4360-43A Mass per Metre = area of section x 0.00785 = kg/m Metres per Tonne = 1000 = metres kg/m Size (A x B)
More informationData sheet: S3 Bar and structural products Profiles, dimensions & tolerances. Introduction
Data sheet: S3 Bar and structural products Profiles, dimensions & tolerances Introduction ArcelorMittal South Africa, Vereeniging Works produces a wide variety of long and forged products. Products are
More informationMILD STEEL PLATE (G250 & G300)
Page 24 MILD STEEL PLATE Product Shortname: PL Specifications: Size Designation: AS/NZS 1594:2002 HA250 AS/NZS 3678:2011 G250 JIS G3101:2010 SS400 AS/NZS 1594:2002 HA300 AS/NZS 3678:2011 G300 Length (m)
More informationProduct Availability Guide. Pipe and tube structural products
Product Availability Guide Pipe and tube structural products Effective from: April 2018 Cancels previous guide dated: November 2017 Applicable for Australia and New Zealand Pipe and tube structural products
More informationRRP $12.95 KNOW YOUR STEEL. Steel Mass Reference & Product Catalogue NO DRAMAS. or call
RRP $12.95 KNOW YOUR STEEL Steel Reference & Product Catalogue NO DRAMAS www.metaland.com.au or call 1300 638 252 Foreword This publication has been prepared by Metaland which is an operating business
More informationPRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH
PRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH INDEX 01. HOT ROLLED REINFORCING BARS PAGE 4 02. WIRE ROD PAGE 6 03. BILLET FROM CONTINUOUS CASTING PAGE 8
More informationSEVENTH EDITION HOT ROLLED AND STRUCTURAL STEEL PRODUCTS
SEVENTH EDITION HOT ROLLED AND STRUCTURAL STEEL PRODUCTS HOT ROLLED AND STRUCTURAL STEEL PRODUCTS CONTENTS INTRODUCTION 1 TEST CERTIFICATES AND 2 CERTIFICATES OF COMPLIANCE BUILD WITH STANDARDS AND ACRS
More informationCooper & Turner Ltd STRUCTURAL
Cooper & Turner Ltd STRUCTURAL Page 1 of 8 Dimensions of Fully Threaded Bolts/Setscrews Thread d M16 M20 M24 M30 M36 p (pitch) 2 2.5 3 3.5 4 a max. 6 7.5 9 10.5 12 c max. 0.8 0.8 0.8 0.8 0.8 min. 0.2 0.2
More informationJIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
More informationWire rope accessories. 5. Wire rope accessories. Index
Wire rope accessories 5. Wire rope accessories 1 General 1.1 About Hendrik Veder Group 1.2 Trade names 1.3 Certified Quality 1.4 Certificates 1.5 Key suppliers & brands 1.6 Contact information 1.7 Locations
More informationPresby Steel, LLC. 143 East Milan Road Berlin, NH FAX:
143 East Milan Road 603-752-3022 FAX: 603-752-2821 1 S BEAMS (I Beams) Conforms to ASTM A36 Designation Web Depth/Inches Thickness Flange in Inches Area x Wt./Ft./Lbs. in Inches Width Thickness Sq. In.
More informationProduct Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
More informationCERTIFIED TO ISO 9001:2008 CERT NO:AR 0994
CERTIFIED TO ISO 9001:2008 CERT NO:AR 0994 www.melewar-mig.com MELEWAR STEEL TUBE SDN. BHD. (111059-D) Lot 53 Persiaran Selangor, 40200 Shah Alam, Selangor Darul Ehsan. Malaysia Tel : 603-5519 2455 (12
More informationPRODUCT CATALOGUE. February we ll see it through
PRODUCT CATALOGUE February 2018 Orrcon Steel is a leading Australian distributor and manufacturer of Steel, Tube and Pipe. We have distribution centres in six Australian states and a number of Orrcon Steel
More informationCooper & Turner Ltd STRUCTURAL
Cooper & Turner Ltd STRUCTURAL Page 1 of 6 Dimensions of Fully Threaded Bolts/Setscrews CHARACTERISTIC STANDARD Thread d M12 M16 M20 M24 M30 M36 p (pitch) 1.75 2 2.5 3 3.5 4 a max. 5.3 6 7.5 9 10.5 12
More informationPRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM
PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com
More informationProduct Catalogue ELIVERY SERVICE. xtendable Semi-trailer. ody Truck Sheet ( HR, GALV, ZINC.
SHS painted and galv al Steel, Expanded & erforated Sheet ng CHS black and galv Flat Bar Round Bar Beams Columns ELIVERY SERVICE Channels VAILABLE Angles ody Truck Sheet ( HR, GALV, ZINC. ) lain late xtendable
More informationProduct Range Handbook
Product Range Handbook 1 Where to find us Building 144 Culham Number 1 Site Station Road CULHAM Oxon OX14 3DA Sales: +44 (0)1865 409300 Fax: +44 (0)1865 407991 2 INDEX PAGE ROUND BARS 4 SQUARE BAR 5 TEES
More informationPIPE & PIPE FITTINGS BOOK MAY 2016 PIPE & PIPE FITTINGS BOOK
PIPE & PIPE FITTINGS BOOK MAY 2016 PIPE & PIPE FITTINGS BOOK May 2016 Introduction Quality Fletcher Easysteel continues to maintain a strong commitment to the principles which have become total quality
More informationTalk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07. Head Office: Cape Town: Durban: Tel Tel.
Talk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07 Head Office: Cape Town: Durban: Piet Rautenbach Steet Tel. +27 12 541-3211 Tel. +27 21 949-0658 Tel. +27 31 701-6078 P.O. Box
More informationLARGEST STOCK OF METRIC SIZE METALS IN AMERICA
WWW.METRICMETAL.COM METRIC SIZE METALS REFERENCE GUIDE 2009 ISO 9001:2000 Certifi ed LARGEST STOCK OF METRIC SIZE METALS IN AMERICA Our highly trained sales staff is waiting for your calls. With more than
More informationCredit Card and EFTPOS Facilities available. Phone Orders welcome Deliveries/Transport arranged
Round, Square, Angle Page 3 Bright, Hollow Bar, Expanded Mesh Page 13 Flat Bar Page 4 House Columns/Posts Page 14 Channel, Structurals Page 5 Roofing, Purlins & Battens Page 15 RHS Square/Rectangular Tube
More informationCHAINS.
CHAINS www.vanguardsteel.com CHAIN TABLE OF CONTENTS Page Chain Grade 30 Dimensions 1 Grade 30 Bright 2 Grade 30 Galvanized 3 Grade 30 Zinc Plated 4 Grade 70 5 Grade 80 6 Grade 100 7 Jack 8 Long Link 9
More informationContents
Contents 1 2-3 4 5 6-7 8 9 10 11 12 13 14 15-19 20-26 27 28 29 30 31 32 33 A Word about Steel Pipe Company Profile & Premises and Plants of Melewar Steel Tube Sdn. Bhd. Main Products Quality Products Quality
More informationCopper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
More informationPolyester Lifting Slings
Est. 969 Polyester Lifting Slings FASTLIFT Endless Roundsling (ERS) Roundslings with seamless single cover and protected label WLL Colour Weight Rec. min Rec. min Standard size range available (tonnes)
More informationACSR- ROPES Aluminium wire steel reinforced (ACSR conductor)
ACSR- ROPES Aluminium wire steel reinforced (ACSR conductor) The steel reinforced aluminium conductor consists of seven or more aluminium wires applied in concentric layers over a steel core made of one
More informationMILD STEEL CHAIN & FITTINGS
MILD TEEL CHAIN & ITTING CHAIN IDENTIICATION 84 PWB GADE L CHAIN 85-86 AMOGALV 86 PWB POO COIL CHAIN 87-88 PLIT LINK 89 PWB Anchor Chain identification Grade L Chain - Chain identification (6.00mm - 22.00mm)
More informationManufactured Products
Page 76 GRID MESH Product Shortname: GRID Gridmesh: Gridmesh is a single sheet of steel that has been slit and expanded into a network of uniformed shaped openings. As a result Gridmesh has a distinctive
More informationE-LINE KM CABLE LADDER SYSTEMS. Pre-galvanized Foldable Cable Ladders.
E-LINE CABLE LADDER SYSTEMS Pre-galvanized Foldable Cable Ladders www.eae.com.tr Cable Ladder H-A YD Horizontal Riser Module UKS AD Flat 4 Way Intersection Module Left-hand Reduction Cable Ladder and Modules
More informationERW construction tubes and pipes
ERW construction tubes and pipes Welded Hollow Rounds Quality according to EN10219. Pieces / Cross - section mm Bundle 0.9 mm 1.2 mm 1.4 mm Φ16 200 0,345 0,451 - Φ21 150 0,465 0,605 0,680 Φ25 150 0,547
More informationAvailability Guide. Pipe & Tube Structural Products. Effective From: 27 November Cancels previous Guide dated: 1 September2009
uideproductg deproductgu oductguidep Pipe & Tube Structural Products eproductguid ctguideprod ideproductg Availability Guide eproductguid uctguideprod Effective From: 27 November 2009 Cancels previous
More informationIS&G STEEL STOCKHOLDERS LTD PRODUCT GUIDE
IS&G STEEL STOCKHOLDERS LTD PRODUCT GUIDE IS&G IS&G Steel Stockholders Ltd have been established for over eighty years. We have branches at Beckenham in Kent; Chelmsford in Essex and Ipswich in Suffolk.
More informationWe Supply. You Build. Soon Hoe Steel Sdn Bhd. Your One Stop Steel & Fitting Supplier PRODUCT CATALOGUE. Group of Companies
We Supply. You Build. Soon Hoe Steel Sdn Bhd Your One Stop Steel & Fitting Supplier PRODUCT CATALOGUE CONTENT. ABOUT SOON HOE STEEL 4. CORPORATE VISION AND MISSION 4. CONTACT US 5. OUR PRODUCT 6. API PIPE
More informationElectrical and Mechanical Supports Systems
Electrical and Mechanical Supports Systems Index - Mechanical & Electrical Support Systems This catalogue contains Mechanical & Electrical Support Systems information only as indicated below. For any additional
More informationMIN ORDER CHARGE 30. 1st January 2017 PIANO WIRE. MATERIAL: POLISHED SPRING STEEL Specification: BS 5216 ND3
PIANO WIRE MATERIAL: POLISHED SPRING STEEL Specification: BS 5216 ND3 MM S.W.G. PART NO. 0-2.9 3-6.9 7-12.9 13-24.9 25+KG STOCKED IN 3.15 10 101-3150 16.77 15.10 13.42 10.06 9.23 COILS 2.80 11 101-2800
More informationW Straight to success
Precision brass rod W5000 - Straight to success Production from one batch We have installed a state of the art brass rod manufacturing plant for high-precision machining. All operations starting with the
More informationDesign And Analysis Of Two Wheeler Front Wheel Under Critical Load Conditions
Design And Analysis Of Two Wheeler Front Wheel Under Critical Load Conditions Tejas Mulay 1, Harish Sonawane 1, Prof. P. Baskar 2 1 M. Tech. (Automotive Engineering) students, SMBS, VIT University, Vellore,
More informationDear Business Partners,
PRODUCT CATALOGUE Dear Business Partners, MERETUK FOREIGN TRADE is an independent steel trading company based in Iskenderun / Hatay / TURKEY. We are involved in trading and marketing of long, tubular,
More informationINDEX ABOUT OUR GROUP... 5 UNIVERSAL BEAMS... 6 UNIVERSAL COLUMNS... 9 EUROPEAN SPECIFICATION BEAMS WITH PARALLEL FLANGES... 10
PRODUCT CATALOGUE 1 2 3 INDEX ABOUT OUR GROUP... 5 UNIVERSAL BEAMS... 6 UNIVERSAL COLUMNS... 9 EUROPEAN SPECIFICATION BEAMS WITH PARALLEL FLANGES... 10 MS CHEQUERED SHEETS... 13 CHANNELS... 14 HOT ROLLED
More informationRapid Lifting Anchor System. Connector Ring Clutch (t)
Rapid Lifting Anchor System The Rapid Lifting System primary purpose is to lift precast concrete with the help of its Rapid anchoring system, comprises of required dynamic load bearing anchor and required
More informationCustom welded sections can be sourced within New Zealand (Steltech) within 4 to 6 weeks of order.
MATERIALS Steel Availability in New Zealand Author: Clark Hyland Affiliation: Steel Construction New Zealand Inc. Date: 28 th November 2007 Ref.: MAT1003 Key Words steel availability, procurement Introduction
More informationFABRICATION COMPONENTS STAINLESS STEEL MANDREL BENDS T304 STAINLESS STEEL OVAL MANDREL BENDS T304 S.S. OVAL TO ROUND TRANSITIONS
STAINLESS STEEL MANDREL BENDS T304 STAINLESS STEEL OVAL MANDREL BENDS Nominal Size Bend Angle 13189 3 45 deg. (horizontal) 16 gauge 4 1/2 13191 3 90 deg. (horizontal) 16 gauge 4 1/2 13200 3 45 deg. (vertical)
More informationLong products and wire rod
production prograe Long products and wire rod Mittal Steel Ostrava a.s. production prograe Long products and wire rod Mittal Steel Ostrava a.s. Mittal Steel Ostrava a.s. TRADITIONAL PRODUCER OF THE HIGH
More informationreidbar DESIGN GUIDE STEEL COMPONENTS PRODUCT RANGE SPECIFICATION & INSTALLATION GUIDE Contents
Contents DESIGN GUIDE reidbar STEEL COMPONENTS PRODUCT RANGE SPECIFICATION & INSTALLATION GUIDE 1 Reid - 0800 88 22 12 For technical data go to www.ramsetreid.com ReidBar TM Steel Components Overview ReidBar
More informationFREESTANDING WOOD FIRES GRANDVIEW (NZ & AUST) Fan Three Speed - DE Page 6. Flue 175mm Hi Therm - 4m SFP1003
Issue F December 2005 REF # 795981 FREESTANDING WOOD FIRES GRANDVIEW (NZ & AUST) NZ AUST Grandview Charcoal VHT S2 995939 Page 2 Charcoal VHT S3 995981 Page 2 Fan Three Speed - DE 995557 995557 Page 6
More informationPiling Product Guide Edition. Servicesteel.org
Piling Product Guide 2017 Edition Strong Foundations Starith Service Steel Service Steel Supplies All Your Foundation Products You Are Our Number One Priority From industry leading steel sheet piling to
More informationHeat Resistant Alloy. D1 Tolerance D4 Tolerance. Drill Dia.
SL Standard margin type Hardened Steel Stainless Steel e e e u u a From 2 3 l/d hole depth. a SL standard margin type for accurate and reliable drilling. a All drills with through coolant holes as standard.
More informationINSTRUCTIONS FOR USE CAUTIONS AND WARNINGS
SECTION 3 General INSTRUCTIONS FOR USE CAUTIONS AND WARNINGS Commercial shackles are not to be used for lifting purposes. Should extreme circumstances or shock loadings be applicable, this must be taken
More informationDesign principles and Assumptions
Design principles and Assumptions The design and use of concrete slabs that utilise ARMOURDECK 300 in composite construction may be carried out using either: the relevant Australian and international Standards
More informationSpecialists in Sheet, Plate, Extrusions, Cutting, Folding, Street Sign Extrusion & Brackets
ALUMINIUM Specialists in Sheet Plate, Extrusions Cutting Folding Street Sign Extrusion & Brackets Opening Hours: Monday - Friday 8:15am - 4.45pm. Saturday: 830am to 12pm Specialists in Sheet, Plate, Extrusions,
More informationSand Trap Louvers OSTL 300 SERIES. Sand Trap Louvers
Model : OSTL GI 341 Description: OPTIMA make Sand Trap Louver is used as pre-filter for the protection of air conditioning plants in area exposed to extreme levels of industrial pollution. It has a high
More informationCABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CABLE MANAGEMENT SOLUTIONS CATALOGUE03/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS www.legrand.co.uk CHANNEL SUPPORT THE BACKBONE OF ALL YOUR SUPPORT NEEDS Swifts
More informationStability and Diversity
Page 18 BIRCOsir NW BIRCOsir NW Stability and Diversity Channel elements 1% internal inbuilt fall steel angle (V2A, combi-closure system not in V2A) 180 3 250 50 50 Nr. 0/0 Nr. 15 Channel no. 1 0 mm /
More informationPRODUCT CATALOGUE MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R PRODUCT CATALOGUE REGISTERED COMPANY MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY Who we are Founded in 2005 by Directors Hayden Froggatt and
More informationABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 008 701 335 SECTION 5 Structural Cable Ladder Systems A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO9001 Lic No 13146 EDITION 2 SECTION 5: Structural Cable Ladder
More informationBUCKLING ANALYSIS OF CONNECTING ROD
BUCKLING ANALYSIS OF CONNECTING ROD Rukhsar Parveen Mo. Yusuf 1, prof.a.v.karmankar2, Prof.S.D.Khamankar 3 1 Student of M.Tech (CAD/CAM), Rajiv Gandhi College Of Engineering, Research and Technology, Chandrapur(M.S.)
More informationPiping Systems Data Charts
Piping Systems Data Charts 00 478 335 www.steelandtube.co.nz Face side Chart Reverse side Chart YOUR TOTAL PIPING PACKAGE Steel & Tube is New Zealand s largest distributor Pipes, Pipe Fittings, Valves
More informationALUMINUM DISTRIBUTING, INC S.W. 2nd Ave. Ft. Lauderdale, FL Table of Contents
Table of Contents Page 2.........Equal & Unequal Angle Structural & Architectural Page 3.......................Flat Bar Structural Page 4.....................Flat Bar Architectural Page 5..... U Channel,
More informationWire ø in. Cat. No. ETQ 2002SS *ETQ 2004SS *ETQ 2006SS
Steel Basket Tray Deep U-Profile Fast connection system, low profile for confined spaces The deep U-profile is ideally suited for light- to medium-duty commercial and industrial applications where space
More informationReinforcing steel bars
Reinforcing steel bars 6 The Company produces the reinforcing rolled steel according to the international and national standards: DSTU 3760:2006 (Ukraine) GOST 5781-82 (international standard) GOST 10884-94
More informationIntroduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development.
Pipes & Fittings SHIELD Introduction SHIELD is a company created to cater to the infrastructure, fire protection and building services industries with a comprehensive range of products designed to be competitive
More informationDatasheet. control line. e109 - September Manufacturing Range. Experience. Applications. Production Facilities
Datasheet Experience The Oil & Gas sector represents one of Fine Tubes principal markets for supply of a wide range of tubular product forms and materials. Our products have been successfully used in some
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationGeneral purpose aluminum motors Technical data for totally enclosed squirrel cage three phase motors, two-speed
J=1/4 GD Weight kgm kg 3000/1500 = /4 poles 400 V 50 Hz Fan drive, two separate windings 0.65/0.14 M3V 80 3GV 087 11- B 860/1450 73.0/57.0 0.85/0.57 1.5/0.58 4.8/3.6.18/0.93 1.9/.0./.3 0.0008 9 0.95/0.
More informationBUILDING PRODUCTS LCP PURLINS & GIRTS. Purlin and Girt Structural System. BC 1:2012 FPC Cert. No. ABS-BCI-SG-0001
BUILDING PRODUCTS LCP PURLINS & GIRTS Purlin and Girt Structural System BC 1:2012 FPC Cert. No. ABS-BCI-SG-0001 CERT NO. FM 59595 BS EN ISO 9001 : 2008 FEATURES Cold formed purlins and girts are recognised
More informationCopper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30)
Shipbuilding OSNA -10 and OSNA -30 Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30) KME Germany GmbH & Co. KG Shipbuilding - OSNA -10 and OSNA -30 [EN] Content KME - The Company
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More information4300 Catalog. Metric Tube. Parker Hannifin Corporation Tube Fittings Division Columbus, Ohio
Metric Tube Q 4300 Catalog Metric Tube Q2 4300 Catalog Metric Tube Introduction Parker offers three types of seamless metric tubes for hydraulic, pneumatic and instrumentation applications: dipped for
More informationDIMENSIONS AND PROPERTIES HANDBOOK DESIGN WITH STEEL DIMENSIONS AND PROPERTIES HANDBOOK STEEL S&T047
DIMEIO AD PROPERTIE HADBOOK DEIG WITH TEEL DIMEIO AD PROPERTIE HADBOOK TEEL &T047 JU 203 OTET Uiversal Beams 3 Uiversal olums 5 Parallel Flage haels 6 Joists Taer Flage Beams 7 Equal Agles 8 Uequal Agles
More informationDesign Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables)
TF 209-R-08 Metric Design Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables) INTRODUCTION This Tech Fact* provides basic information on coldworked wire and welded
More informationBOSS STEEL Metal Reference Book Version 9
Intro BOSS STEEL Metal Reference Book Version 9 This ninth edition of the Boss Steel Metal Reference Book has been designed to inform and assist you in making the right decision when it comes to acquiring
More information126 Ridge Road Tel: (607) PO Box 187 Fax: (607)
1. Summary Finite element modeling has been used to determine deflections and stress levels within the SRC planar undulator. Of principal concern is the shift in the magnetic centerline and the rotation
More informationIndex. Pipe Support Systems Kee Klamp Pipe Fittings 30 & 31 Kee Lite Aluminium Fittings 31 Elgate 32 Pipe Clamps 33
Product Catalogue May 2005 Index Steel Angles 2 Beams 4 Channels 3 Coil Processing 20 Cold-formed Channels 3 Columns 5 Duragal Angles 2 Duragal Channels 3 Duragal Flats 3 Duragal Hollow Sections 10 Fastenings
More information72 PITCH 1/8 FACE 1/8 BORE 20 PRESSURE ANGLE. 29L (800) In CT: (203) NORDEX
20 PRESSURE ANGE 1/8 BORE 5 5 3 STAINESS STEE 2024-T4-AUMINUM ORDER BY CATAOG NUMBER *AS-G1-20 *AS-G1-22 *AS-G1-24 AS-G1-26 AS-G1-27 *AA-G1-20 *AA-G1-22 *AA-G1-24 AA-G1-26 AA-G1-27 20 22 24 26 27.2777..3333.10.37.6.333.1.389.3
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationHandrail Handrail I ; (/'' -*, 0+. '/'' )/, /*. nnn%cfzb\i%zfd%xl nnn%cfzb\ieq%zf%eq
Tubular Ball Handrail System Locker Group s tubular ball handrail system is a safe, strong simple barrier solution. The complete system lends itself to be quickly and economically erected in either a workshop
More informationDIMENSIONS AND PROPERTIES HANDBOOK DESIGN WITH STEEL DIMENSIONS AND PROPERTIES HANDBOOK STEEL S&T047
DIMEIO AD PROPERTIE HADBOOK DEIG WITH TEEL DIMEIO AD PROPERTIE HADBOOK TEEL &T047 FEB 207 OTET Universal Beams 3 Universal olumns 5 Parallel Flange hannels 6 omflor omposite teel Floor Decks 7 Joists Taper
More informationTn (Nm) Ts/Tn. Is/In
Technical Data Two Speed Motor Single Winding Motor type 4 / 8 pole Power (kw) RPM In V (A) Power factor Cos ϕ Tn (Nm) Ts/Tn Is/In AC brake In (ma) DC brake In (ma) Z 0 (starts/ hour) Moment of inertia
More informationBENTELER Distribution. Pipe solutions to the petrochemical and power generation sectors
BENTELER Distribution Pipe solutions to the petrochemical and power generation sectors About us BENTELER Distribution is an internationally operating stockholding and processing company of steel tubes
More informationLARGE MESH RANGE. 07 Profile. 09 Profile. 12 Profile. 15 Profile. LWM 19.0mm. LWM 28.0mm. LWM 30.0mm. LWM 38.0mm. SWM 7.0mm. SWM 9.0mm. SWM 12.
LARGE MESH RANGE 07 Profile 7.0mm LWM 19.0mm 09 Profile 9.0mm LWM 28.0mm 12 Profile 12.0mm LWM 30.0mm 15 Profile 15.0mm LWM 38.0mm 1 LARGE MESH RANGE LARGE STEEL Mesh Reference Standard Nominal Sheet Sizes
More informationCable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/30 Cable Ladder Type 3/50 K-1000 Channel KT3/KT5 Ladder Tray
www.hesales.com.au Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/3 Cable Ladder Type 3/5 K- Channel KT3/KT5 Ladder Tray -.55mm base Galvabond - 2.4m length. 14mm side - Self-splicing
More informationPRELIMINARY STEEL IMPORTS INCREASE 11.6% IN JUNE Finished Import Market Share YTD at 27%
News Release FOR IMMEDIATE RELEASE July 26, 2017 CONTACT Lisa Harrison 202.452.7115/lharrison@steel.org PRELIMINARY STEEL IMPORTS INCREASE 11.6% IN JUNE Finished Import Market Share YTD at 27% Washington,
More informationALD. Sound attenuating exterior wall grille QUICK FACTS. Excellent noise attenuation A robust grille that withstands severe climatic conditions
Sound attenuating exterior wall grille QUICK FACTS Excellent noise attenuation A robust grille that withstands severe climatic conditions Available in a number of different materials Technical description
More informationSTEEL IMPORTS UP 22% YTD OVER SAME PERIOD IN 2016 Finished Import Market Share YTD at 28%
News Release FOR IMMEDIATE RELEASE August 23, 2017 CONTACT Lisa Harrison 202.452.7115/lharrison@steel.org STEEL IMPORTS UP 22% YTD OVER SAME PERIOD IN 2016 Finished Import Market Share YTD at 28% Washington,
More informationArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR. Innovative high strength steels for economical steel structures
ArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR Innovative high strength steels for economical steel structures Shanghai World Finance Center, P.R. China Innovative high strength
More informationOverhead transmission lines Spacers
= SVENSKA KRAFTNÄT SWEDISH NATIONAL GRID UNIT, BUSINESS AREA AEL, Asset Management Lines OUR REFERENCE TR05-08E DATE 2016-06-09 CONSU12TATIONS TECHNICAL GUIDELINE REVISION 3 APPROVED Overhead transmission
More informationDIVISION: METALS SECTION: COLD-FORMED METAL FRAMING REPORT HOLDER: WARE INDUSTRIES D/B/A MARINO\WARE
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3578 Reissued 0/206 This report is subject to renewal 0/208. DIVISION: 05 00 00 METALS SECTION:
More informationSTRAIGHT PERFORATED TRAY
STRAIGHT PERFORATED TRAY RETURNED EDGE TYPE RETURNED FLANGE TYPE NOTE: Other sizes are available upon request WIDTH (W) HEIGHT (H) 50 15 15 150 15 15 15 400 15 500 15 600 15 STRAIGHT CABLE TRAY STANDARD
More informationThreaded Bar and Accessories
ed ar and ccessories old Rolled ed ar and ccessories pprox. Major ar Grade # # #4 0 0 0 #2 Nomal / 2 /4 / 5 2 /4 55 2 /4 55 2 /2 64 2 /2 64 /2 9 M. Net rea Thru s 2 ( 2 ) 0.7 5.0.000 6.0.270 9.0.5 06.0
More informationCouplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
More informationDesign and Analysis of Connecting Rod for High- Speed Application in I.C Engine
Design and Analysis of Connecting Rod for High- Speed Application in I.C Engine Mr. Kailas S. More P. G Student Department of Mechanical Engineering North Maharashtra University SSBTCOET- Jalgaon, India
More informationSTEEL IMPORTS UP 20% YEAR-TO-DATE Finished Import Market Share YTD at 28%
News Release FOR IMMEDIATE RELEASE October 25, 2017 CONTACT Lisa Harrison 202.452.7115/lharrison@steel.org STEEL IMPORTS UP 20% YEAR-TO-DATE Finished Import Market Share YTD at 28% Washington, D.C. Based
More informationSteel technology Elastic properties of steel 1071 European standards for structural steels 1072
Appendix Steel technology Elastic properties of steel 1071 European standards for structural steels 1072 Design theory Bending moment, shear and deflection 1077 Bending moment and reaction 1102 Influence
More informationSTEEL IMPORTS UP 19% YEAR-TO-DATE THROUGH OCTOBER Finished Import Market Share YTD at 28%
News Release FOR IMMEDIATE RELEASE November 27, 2017 CONTACT Lisa Harrison 202.452.7115/lharrison@steel.org STEEL IMPORTS UP 19% YEAR-TO-DATE THROUGH OCTOBER Finished Import Market Share YTD at 28% Washington,
More information100 YEARS OF PRECISION
191 to 201 100 YEARS OF PRECISION VEE JEWEL SAPPHIRE AND GLASS VEE JEWELS Vee bearings are available in sapphire, ruby, hard Pyrex glass and tungsten carbide materials. Vee and cup type jewel bearings
More informationSteel Price List - February 2016
ABN: 13 006 287 038 PTY LTD Steel Price List - February 2016 Sales and Distribution Division: Address: Phone: Fax: Email: Website: Postal Address: 132-134 Abbott Road Hallam, VIC 3803 9796 3090 9796 3588
More information+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.
Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3
More informationFINISHED STEEL IMPORT MARKET SHARE AT 25% IN JANUARY
News Release FOR IMMEDIATE RELEASE March 27, 2019 CONTACT Lisa Harrison 202.452.7115/lharrison@steel.org FINISHED STEEL IMPORT MARKET SHARE AT 25% IN JANUARY Washington, D.C. Based on preliminary Census
More informationLINEAR MOTION SYSTEM COMPONENTS
R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEM COMPONENTS LINEAR MOTION SYSTEM COMPONENTS PIC Design has added a most comprehensive selection of precision components for linear motion applications.
More information