Availability Guide. Pipe & Tube Structural Products. Effective From: 27 November Cancels previous Guide dated: 1 September2009

Transcription

1 uideproductg deproductgu oductguidep Pipe & Tube Structural Products eproductguid ctguideprod ideproductg Availability Guide eproductguid uctguideprod Effective From: 27 November 2009 Cancels previous Guide dated: 1 September2009

2 Product Availability Guide Table of contents Circular Hollow Sections (CHS) Red Pipe for Fire Systems... 1 Extra Light & Light Pipe Grade :,, & DuraGal... 2 Medium Pipe Grade C250L0: &... 3 Heavy & Extra Heavy Pipe Grade C250L0: &... 4 Large Structural CHS Grade : & LiteOil Square Hollow Sections (SHS) Structural SHS Grade & DualGrade /C450L0:, DuraGal,, LiteOil & Rectangular Hollow Sections (RHS) Structural RHS Grade & DualGrade /C450L0:, DuraGal,, LiteOil & Other Sections Post/Building Products DualGrade /C450L0 GAL Rail/Silo Sections Grade & DualGrade /C450L0, DuraGal & Notations & Abbreviations This publication has been prepared by OneSteel Pty Ltd ABN Please note that the specifications and technical data are subject to change without notice and to ensure accuracy users of this publication are requested to check the information to satisfy themselves and not to rely on the information without first doing so. Unless required by law, the company cannot accept any responsibility for any loss, damage or consequence resulting from the use of this publication. Issue 2, November TS0827. This brochure is not an offer to trade and shall not form any part of the trading terms in any transaction. Copyright OneSteel Pty Ltd ABN Registered Trademark:, KleenKote, DualGrade, DuraGal,Tubeline, BluePlus, Si-Tek TM, GAL140.

3 Red Pipe CHS Grade C250L0 Medium - red painted Plain ends, screwed one end, screwed both ends and screwed & socketed PE SOE 26.9 x M x M X 42.4 x M X 48.3 x M 3 3 X X 60.3 x M X 76.1 x M 3 - X x M x M X x M 3 - X X x M X - - X x M 3 X X X PE, SOE & Red Pipe Specifications: Dual Specified - AS1074 and AS1163 C250L0. Page: 1

4 Extra Light & Light CHS Grade EXTRA LIGHT -, HOT DIP GAL, supagal & DuraGal - plain ends DuraGal 26.9 x XL X X X X 33.7 x XL X 3 3 X 42.4 x XL X 3 X X 48.3 x XL 3 3 X X 60.3 x XL X 3 X X 76.1 x XL - X x XL - X x XL - X x XL X X x XL X X x XL X X - - LIGHT - & HOT DIP GAL - plain ends 26.9 x L 3 X 33.7 x L X x L X x L X x L X x L X X 88.9 x L X X x L X X x L X X x L X X x L X X DuraGal Extra Light Light EXTRA LIGHT & LIGHT - & HOT DIP GAL - swaged one end, swaged both ends SWOE SWOE SWBE 26.9 x XL - X X 33.7 x XL - X X 33.7 x L - X X 42.4 x XL - 3 X 42.4 x L - 3 X 48.3 x XL - X X 48.3 x L - X X 60.3 x XL - X X 60.3 x L - X - Specifications: AS AS/NZS4792 HDG Swaged Page: 2

5 Medium CHS Grade C250L0 MEDIUM - PLAIN ENDS, SCREWED ONE END, SCREWED BOTH ENDS & SCREWED & SOCKETED PE SOE 21.3 x M* x M 3 X X x M 3 - X x M 3 - X x M 3 - X x M 3 - X x M x M x M X x M x M x M MEDIUM - HOT DIP GAL PLAIN ENDS, SCREWED ONE END, SCREWED BOTH ENDS & SCREWED & SOCKETED PE SOE 21.3 x M* x M 3 X X X 33.7 x M 3 X 3 X 42.4 x M 3 X 3 X 48.3 x M 3 X 3 X 60.3 x M 3 X 3 X 76.1 x M 3 X X X 88.9 x M 3 X X X x M 3 X X x M 3 X 3 X x M 3 X X X x M 3 X X X PE, SOE & PE, SOE & Medium Medium Specifications: Dual Specified - AS1074 and AS1163 C250L0. - AS/NZS4792 HDG 300. * 15 M supplied as ATM0801 in oiled and finish only. Page: 3

6 Heavy & Extra Heavy CHS Grade C250L0 HEAVY - PLAIN ENDS, SCREWED ONE END, SCREWED BOTH ENDS & SCREWED & SOCKETED PE SOE 26.9 x H 3 X X x H 3 X X x H 3 X X x H 3 X X x H 3 X X x H X x H X - X x H x H X x H x H X HEAVY - HOT DIP GAL PLAIN ENDS, SCREWED ONE END, SCREWED BOTH ENDS & SCREWED & SOCKETED PE SOE 26.9 x H X X X X 33.7 x H X X X x H 3 X X X 48.3 x H 3 X X X 60.3 x H 3 X 3 X 76.1 x H X X X X 88.9 x H X X X x H X X X x H X X X X x H X X X X x H X X X X EXTRA HEAVY - PLAIN ENDS* 26.9 x XH X 48.3 x XH x XH x XH x XH 3 Specifications: Dual Specified - AS1074 and AS1163 C250L0. - AS/NZS4792 HDG 300. *Extra Heavy Plain Ends is supplied to AS 1163 C250L0 only. PE, SOE & PE, SOE & Heavy Heavy Extra Heavy Page: 4

7 Large Structural CHS Grade LARGE STRUCTURAL - CLEAR PLAIN ENDS d o t 12.0 Metres x X x X x 4.8 X X X x X X X x 6.4 X X X & LiteOil Large Structural Specifications: AS1163. Availability: s subject to enquiry, including NOPC (No oil or paint coating and no end code). Page: 5

8 Large Structural CHS Grade LARGE STRUCTURAL - CLEAR PLAIN ENDS d o t 12.0 Metres x 6.4 X X X x 6.4 X 9.5 X X x 6.4 X 9.5 X X & LiteOil Large Structural Specifications: AS1163. Availability: s subject to enquiry, including NOPC (No oil or paint coating and no end code). Page: 6

9 SHS Grade & DualGrade /C450L0 SHS - PAINTED, SUPAGAL & DURAGAL DualGrade DualGrade DuraGal DualGrade 20 x 20 x X X - X x 25 x X X 3 X X 3 X X X - X 30 x 30 x 1.6 X - X X X X X X X - X x 35 x 1.6 X - X X X X - X 40 x 40 x X X X 3 X X X X x 50 x X 3 X X 3 X X X 3 X X X X X x 65 x 1.6 X X X X X 2.0 X X X X X X - X X X () All Listed Finishes All Listed Finishes 6.5m 8.0m SHS 50x50x6 is supplied as LiteOil. * These products are coated with Si-Tek (clear polymer coating) and are not primer painted. + Also available in standard 12m pack lengths. Page: 7

10 SHS Grade & DualGrade /C450L0 SHS - PAINTED, SUPAGAL & DURAGAL DualGrade DualGrade DuraGal DualGrade 75 x 7 5 x 2.0 X X X X X X - 3 X X 89 x 89 x X 90 x 90 x 2.0 X x 100 x 2.0 X X X X - X X x 125 x x 150 x () All Listed Finishes All Listed Finishes 8.0m 12.0m SHS Specifications: All sections to AS 1163 or AS 1163 DualGrade /C450L0 as marked. Standard lengths are 8 metres. Page: 8

11 SHS DualGrade /C450L0 SHS - CLEAR, LITEOIL & PAINTED * LiteOil 100 x 100 x X X x 125 x X X x 150 x X x 200 x X X X X x 250 x X X x 300 x x 350 x X X x 400 x () All Listed Finishes All Listed Finishes 8.0m 12.0m SHS Specifications: All sections to AS 1163 or AS 1163 DualGrade /C450L0 as marked. Standard lengths are 12 metres. * Temporary rust preventative Page: 9

12 RHS Grade & DualGrade /C450L0 RHS - PAINTED, SUPAGAL & DURAGAL DualGrade DualGrade DuraGal DualGrade 50 x 20 x 1.6 X X 2.0 X X 2.5 X X 3.0 X X 50 x 25 x X X X X 3 65 x 35 x X X 3 X X - - X - 75 x 25 x 1.6 X - X X X 2.0 X - X - X 2.5 X - X - X 75 x 50 x 1.6 X - - X X X X X X x 38 x X X X - X X x 50 x 1.6 X X X X - X X X () All Listed Finishes All Listed Finishes 8.0m 12.0m RHS Specifications: All AS 1163 or AS 1163 DualGrade /C450L0 as marked. Standard lengths are 8 metres. Page: 10

13 RHS Grade & DualGrade /C450L0 RHS - PAINTED, SUPAGAL & DURAGAL DualGrade DualGrade DuraGal DualGrade 102 x 76 x X x 75 x 2.0 X X - - X X X X X 127 x 51 x X X x 50 x 2.0 X X X X - X X X X - - X 150 x 100 x x 76 x x 100 x () All Listed Finishes All Listed Finishes 8.0m 12.0m RHS Specifications: All AS 1163 or AS 1163 DualGrade /C450L0 as marked. Standard lengths are 8 metres. Page: 11

14 RHS DualGrade /C450L0 RHS - CLEAR, LITEOIL & PAINTED * LiteOil 150 x 100 x X X x 100 x X X X x 150 x X X X x 200 x X x 250 x X X x 200 x X x 300 x X X () All Listed Finishes All Listed Finishes 8.0m 12.0m RHS Specifications: All AS 1163 or AS 1163 DualGrade /C450L0 as marked. Standard lengths are 12 metres. * Temporary rust preventative Page: 12

15 Post/Building Products DualGrade /C450L0 POST - GAL Metres GAL140 DualGrade 90 x 90 x 2.0 X BUILDING PRODUCTS - GAL140 GAL140 DualGrade 8.0 Metres 75 x 50 x 1.6 X 90 x 90 x 2.5 X 100 x 50 x 1.6 X 2.0 X 150 x 50 x 2.0 X 3.0 X MOQ MOQ GAL140 Pack Tonnes MOQ MOQ GAL140 Pack Tonnes Post/Building Products Specifications: AS 1163 DualGrade /C450L0. GAL140 products are to Section 3 AS/NZS 4792 with a minimum average zinc coating of 140g/m 2 on both internal and external surfaces. MOQ Pack quantities refer to standard length only. For non standard length, please calculate using the MOQ tonnes. Page: 13

16 Rail/Silo Sections Grade & DualGrade /C450L0 UNIRAIL - SUPAGAL 6.1 Metres 60 x 48 x 2.0 X STOCKRAIL - PAINTED, SUPAGAL & DURAGAL DuraGal DualGrade 6.1 Metres 53 x 35 x X - 97 x 40 x X x 42 x 2.5 X X DuraGal Rail/Silo Sections YARDRAIL - DURAGAL 6.0 Metres DuraGal DualGrade 120 x 48 x 2.0 X SILO - PAINTED, SUPAGAL & DURAGAL DuraGal DualGrade DualGrade DualGrade 8.0 Metres 75 x 64 x 2.3 X X X X X X Specifications: All AS 1163 or As 1163 DualGrade /C450L0 as marked. DuraGal No standard lengths subject to enquiry DuraGal Page: 14

17 Notations & Abbreviations Standard Surface Finishes Description DuraGal GAL140 products are primer painted for protection during storage and handling. products are to Section 3 of AS/NZS 4792 with a minimum average zinc coating of 100g/m2 on both the internal and external surfaces. DuraGal products are to AS/NZS 4792 ILG 100 with a minimum average zinc coating of 100g/m2 on the external surface. GAL140 products are to Section 3 AS/NZS 4792 with a minimum average zinc coating of 140g/m2 on both internal and external surfaces. pipe has a minimum galvanized coating mass of 300g/m2 both inside and out to AS/NZS 4792 Section 2. LiteOil Si-Tek LiteOil products have a light protective oil coating and comes standard on selected products. Si-Tek is a silicon based polymer coating to protect against corrosion. products are coated with a clear coat coating. Non-Standard Surface Finishes NOPC LiteOil Description No oil or paint coating and no end code. Available on request ex-rolling only and may be subject to MOQ. Available on selected sections on request and may be subject to MOQ. Grades C250L0 C450L0 DualGrade /C450L0 Description Cold-formed Grade C250 hollow section to AS 1163 with L0 properties Cold-formed Grade C350 hollow section to AS 1163 with L0 properties Cold-formed Grade C450 hollow section to AS 1163 with L0 properties DualGrade properties which satisfies AS 1163 Grades and C450L0 Order Quantity Minimum Order Quantity (MOQ) Non-Standard Lengths Description Minimum order quantity is subject to change. Refer to our Sales Representative for current applicable minimum order quantity. For non-standard lengths please refer to your Sales Representative for availability and minimum order requirements. The quantity supplied in non-standard mill lengths can vary from -10 to +10% and may include part packs. Abbreviation b CHS d d o H L M PE RHS SHS SOE t XH XL Description Width of section Circular Hollow Section Depth of section Outside Diameter of a Circular Hollow Section (CHS) Heavy Light Lengths per pack Medium Plain Ends Rectangular Hollow Section Screwed Both Ends Square Hollow Section Screwed One End Screwed and Socketed Thickness of section Extra Heavy Extra Light Page: 15