TRADE PRODUCTS AND SERVICES CATALOGUE

Size: px

Start display at page:

Download "TRADE PRODUCTS AND SERVICES CATALOGUE"

Oswald Marvin Cole
5 years ago
Views:

TRADE PRODUCTS AND SERVICES CATALOGUE Effective as of 1 st March, 2013 Supersedes 21 st edition dated 01/01/11 * Note: SALES ENQUIRIES: GENERAL SALES/ESTIMATING: (Site Weld Co-ordinator) PROJECTS

1 TRADE PRODUCTS AND SERVICES CATALOGUE Effective as of 1 st March, 2013 Supersedes 21 st edition dated 01/01/11 * Note: SALES ENQUIRIES: GENERAL SALES/ESTIMATING: (Site Weld Co-ordinator) PROJECTS ADMINISTRATOR: (Tender Processing) SPECIAL PROJECTS EXECUTIVE: (Site measure and project management) LIGHT METALWORKS MANAGER: (Balustrades, screens, mono stringers, etc) LIGHT METALWORK ESTIMATOR / PROJECT MANAGER: SENIOR STRUCTURAL ESTIMATOR: OPERATIONS MANAGER / INSTALLATION MANAGER: ACCOUNTS RECEIVABLE: (& Metalworks scheduling) ACCOUNTS PAYABLE & HR OFFICER: PROCUREMENT OFFICER: CONTRACTS ADMINISTRATOR: PRODUCTION OFFICER / DESPATCH OFFICE: sales@networksteel.com.au RYAN MINOGUE ryan@networksteel.com.au SHANE STEPHENSON shane@networksteel.com.au BRETT SMITH brett@networksteel.com.au ROB DEANS rob@networksteel.com.au GLENN HITCHCOCK glenn@networksteel.com.au GARY DARCY gary@networksteel.com.au WAYNE BUCHANAN wayne@networksteel.com.au SHARON GOOD sharon@networksteel.com.au SONIA ELLMERS sonia@networksteel.com.au ROD RAWDING rod@networksteel.com.au RACHEL ALCORN rachel@networksteel.com.au CLINT or LUKE workshop@networksteel.com.au

2 INDICATIVE 22nd edition THE COLUMN FABRICATION DESIGNS BELOW ARE INDICATIVE ONLY, ALL VARIATIONS ARE AVAILABLE IN EITHER A DURAGAL OR HOT DIP GALVANISED FINISH. Price Per Mtr SHS Duragal when available 40x40x2.0 50x50x3.0 50x50x4.0 50x50x5.0 65x65x3.0 65x65x4.0 65x65x5.0 65x65x6.0 75x75x2.5 75x75x3.0 75x75x4.0 75x75x5.0 75x75x6.0 89x89x3.5 89x89x5.0 89x89x x100x x100x x100x6.0 75x50x x50x x125x x150x x200x5.0 COLUMNS { Duragal } Duragal not available on sizes greater than 100mm sq Standard col. Corner upstand Basic cast in col. Basic one end only col. Special col. PLEASE NOTE: : column rates are inclusive of plates both ends, where applicable. : metre rates listed are inclusive of cutting charges and waste factors : various other S.H.S. sizes are available - priced on application. 1

3 22 22nd edition edition INDICATIVE THE COLUMN FABRICATION DESIGNS BELOW ARE INDICATIVE ONLY, ALL VARIATIONS ARE AVAILABLE IN EITHER A DURAGAL OR HOT DIP GALVANISED FINISH. Price Per Mtr HDG SHS 40x40x2.0 50x50x3.0 50x50x4.0 50x50x5.0 65x65x3.0 65x65x4.0 65x65x5.0 65x65x6.0 75x75x2.5 75x75x3.0 75x75x4.0 75x75x5.0 75x75x6.0 89x89x3.5 89x89x5.0 89x89x x100x x100x x100x6.0 75x50x x50x x125x x150x x200x5.0 COLUMNS { Hot Dip Galvanized } Standard col. Corner upstand Basic cast in col. Basic one end only col. Special col. PLEASE NOTE: : column rates are inclusive of plates both ends, where applicable. : metre rates listed are inclusive of cutting charges and waste factors : various other S.H.S. sizes are available - priced on application. 2

4 22nd edition EXTRAS TO COLUMNS Holes through SHS or RHS Std. Midspan Fixing Cleats Large Midspan Fixing Cleats Small Handrail Tags Extra over for mouse hole cut outs P.O.A P.O.A P.O.A P.O.A P.O.A Adjustable Post Bracket (Threaded rod style) SHS material rates all as per pages 1 or 2 Column Fabrication Complete Assembly Duragal H.D.Galv Adjustable post bracket c/w standard top plate P.O.A P.O.A Adjustable post bracket c/w corner upstand top P.O.A P.O.A Price Per Item: to suit duragal posts (base assembly only) Price Per Item: to suit H.D. Gal posts (base assembly only) P.O.A P.O.A Adjustable Post Bracket (SHS sleeve stub style) SHS material rates all as per pages 1 or 2 Available for 50sq, 75sq & 100sq SHS only Column Fabrication Complete Assembly Duragal H.D.Galv Adjustable post bracket c/w standard top plate P.O.A P.O.A Adjustable post bracket c/w corner upstand top P.O.A P.O.A Price Per Item: to suit duragal posts (base assembly only) P.O.A Price Per Item: to suit H.D. Gal posts (base assembly only) P.O.A Adjustable Head Bracket (SHS material sold separately see rates on pages 1 + 2) Available for 75sq, 89sq sq SHS Column Fabrication Complete Assembly Duragal H.D. Galv Adjustable Head bracket c/w standard Base Plate Head Bracket Sold Loose for Site Welding Head Bracket Shop welded to SHS Post 3

5 22 22nd edition edition # ALL PRICES LISTED BELOW INCLUDE ELECTRIC WIRE BRUSH AND ONE COAT OF R.O.Z.P. PRIMER. (PLEASE NOTE: RATES LISTED HAVE TAKEN CUTTINGS AND OFFCUTS INTO ACCOUNT). UNIVERSAL BEAMS SIZES Kgs PER METRE $ PER MTR INCLUDING NAIL PLATE HOLES $ PER MTR EXCLUDING HOLES 150 UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB # FOR EXTRAS TO ABOVE BEAMS, PLEASE REFER TO PAGE 6 #For mill finish only refer retail cost book 4

6 22nd edition # ALL PRICES LISTED BELOW INCLUDE ELECTRIC WIRE BRUSH AND ONE COAT OF R.O.Z.P. PRIMER. (PLEASE NOTE: RATES LISTED HAVE TAKEN CUTTINGS AND OFFCUTS INTO ACCOUNT). UNIVERSAL COLUMNS SIZES Kgs PER METRE $ PER MTR INCLUDING NAIL PLATE HOLES $ PER MTR EXCLUDING HOLES 100 UC UC UC UC UC UC UC UC UC UC UC UC UC PARALLEL FLANGE CHANNEL (PFC BEAMS) SIZES Kgs PER METRE $ PER MTR INCLUDING NAIL PLATE HOLES $ PER MTR EXCLUDING HOLES 75 x x x x x x x x x x #For mill finish only refer retail cost book 5

7 22 22nd edition edition LINTELS STITCH WELDED TO U-BEAMS & CHANNELS Kgs PER METRE ($) Primed HDG 100 x 100 x 10 Angle Lintel x 125 x 10 Angle Lintel x 100 x 10 Angle Lintel x 150 x 10 Angle Lintel x 10 Flat Lintel 16.1 EXTRAS TO U-BEAMS & CHANNELS ITEM PLATED SPLAY CUTS TO CHANNELS PLATED SPLAY CUTS TO U-BEAMS NOTCHED ENDS TWO HOLE END PLATES TO CHANNELS FOUR HOLE END PLATES TO U-BEAMS STANDARD CONNECTION PLATES X-LARGE CONNECTION PLATES STIFFENER PLATES PURLIN CLEATS M12 x 45 BOLT, NUT & WASHER Z/P (GR8.8) M16 x 45 BOLT, NUT & WASHER Z/P (GR8.8) M20 x 50 BOLT, NUT & WASHER Z/P (GR8.8) COMPUTER GENERATED CAD DESIGN FEE HOT DIP GALVANIZING STANDARD SERVICE HOT DIP GALVANISING OF LESS THAN 20 KG HOT DIP GALVANIZING SILVER BULLET SERVICE STITCH WELD ANGLE LINTEL TO PFC (HIT 50 MISS 200) SHOP WELD PFC PORTAL (PLUS STIFFENERS, END PLATES, BOLTS) SHOP WELD PFC PORTAL (PLUS STIFFENERS, END PLATES, BOLTS) SHOP WELD U-B PORTAL (PLUS STIFFENERS, END PLATES, BOLTS) SHOP WELD U-B PORTAL (PLUS STIFFENERS, END PLATES, BOLTS) ($), VALUE 6

8 22nd edition STAIR STRINGERS (Std. Rise 170mmx250mm Going) 100x50 RHS Stringers c/w 250mm leg Gross Weight 1/Pair of 1 tread (3mm BMT) /Pair of 2 tread (3mm BMT) /Pair of 3 tread (3mm BMT) /Pair of 4 tread (3mm BMT) /Pair of 5 tread (3mm BMT) /Pair of 6 tread (3mm BMT) /Pair of 7 tread (3mm BMT) /Pair of 8 tread (3mm BMT) /Pair of 9 tread (3mm BMT) /Pair of 10 tread (3mm BMT) /Pair of 11 tread (3mm BMT) /Pair of 12 tread (3mm BMT) /Pair of 13 tread (4mm BMT) /Pair of 14 tread (4mm BMT) /Pair of 15 tread (6mm BMT) /Pair of 16 tread (6mm BMT) /Pair of 17 tread (6mm BMT) Pre-Gal H.D.Galv EXTRAS TO STRINGERS Fixing Plates to Base Fixing Plates on return to landing CAD Detailing to Special Requirements Special Rise Hand Built out of jig Price per Pair 7

9 22 22nd edition edition INGAL TEE BEAMS (Suitable for Double Skin Brickwork) Ingal Tee Beam Metre $ each per unit 200 x x 6 T x x 6 T x x 6 T x x 6 T x x 6 T 3900 Ingal Longspan Tee beam Metre $ each per unit 250 x x 6 T x x 6 T x x 6 T x x 6 T x x 6 T x x 6 T x x 6 T x x 6 T 6000 Note: A Tee beam cutting charge of would be applied if specific dimensions are required. 8

10 22nd edition FABRICATED BRICK LINTELS Primed $ per metre Hot Dip Galvanized $ per metre 100 x 100 x 10 M.S. Angle 125 x 125 x 10 M.S. Angle 150 x 100 x 10 M.S. Angle 150 x 150 x 10 M.S. Angle 150 x 100 x 10 M.S. Angle c/w 90 x 8 FMS Vertical Flange Extension Fixing Holes to Above BRICK LINTELS { Arch Bars } FLAT METRE ($), each per UNIT 85 x x x ANGLE METRE ($), each per UNIT 100 x x x x x x x x x x x x x x Note: A Galintel cutting charge of would be applied if specific dimensions are required. 9

11 22 22nd edition edition DESCRIPTION 25x25x2 pre-gal SHS incl. waste factor 16mm round M.S. primed incl. waste factor 16mm round M.S. primed c/w turnbuckles 16mm round M.S. galv. c/w turnbuckles 16mm round M.S. primed c/w tension ring 16mm round M.S. galv c/w tension ring CROSS BRACING SUPPLY ONLY WITH CLEATS TO ENDS FOR BOLTED CONNECTION SUPPLIED AND SITE WELDED FIRST BAY INCL. TRAVEL ADDITIONAL BAYS LOCATION BRISBANE - Redland District BRISBANE - Other Suburbs SOUTH COAST - To Tweed Heads KINGSCLIFFE/POTTSVILLE BYRON / BALLINA DELIVERY CHARGES {From 1kg to 3 tonnes } NORTH COAST - To Noosa IPSWICH To Toowoomba REGIONAL TOWNS Gladstone, Chinchilla etc 10

12 22nd edition Indicative Pricing for: INSTALLATION OF STRUCTURAL STEEL TO RESIDENTIAL HOUSING Half Day Rate Maximum of 3 Beams and 5 Columns (Includes 2 man team plus Franna Crane & driver) Extra Over for Slew Crane (up to 30 Ton) Extra Man for Half Day Full Day Rate Maximum of 6 Beams and 9 Columns (Includes 2 man team plus Franna Crane & driver) Extra Over for Slew Crane (up to 30 Ton) Extra Man for Full Day Network Steel installation services are offered on the understanding that the following basic requirements are provided. Scaffolding and edge protection by head contractor. No allowance for set out, positioning or grouting of cast in bolts. Good clean access required in and around site for cranes, trucks, personnel and access equipment. Head Contractor to provide grid lines and datum levels sufficient for a set out to proceed. U.N.O removal or reinstatement of existing materials is excluded. Unless stated all site work to be carried out during standard hours of 7:00am to 4:30pm Monday to Friday Road closures and/or protection to power lines by head contractor. ON-SITE CUTTING & WELDING TRADESMAN TRADES ASSISTANT GENERATOR WELDER NOTE: MINIMUM CHARGE IN REDLANDS > 45 mins NOTE: MINIMUM CHARGE IN BRISBANE METRO > 45 mins NOTE: MINIMUM CHARGE, OUTER AREAS > 45 mins (i.e. Caboolture/Pine Rivers/Ipswich/Beaudesert) NOTE: MINIMUM CHARGE GOLD COAST > 45 mins NOTE: MINIMUM CHARGE SUNSHINE COAST > 45 mins ONSITE CUT + CAP COLUMNS (incl. std vert. upstand bkt) # FOR EXTENDED HOURS ON SITE, SPECIAL RATES CAN BE NEGOTIATED 11

13 22 22nd edition edition FRAME HARDWARE (see photo gallery pages 13 & 14) ITEM NO. DESCRIPTION QTY SELL PRICE EX GST Post Support Brackets GUS90450 Post Support Bracket 90x450 U shape w/bar each GUS90600 Post Support Bracket 90x600 U shape w/bar each GUS Post Support Bracket 100x450 U shape w/bar each GUS Post Support Bracket 100x600 U shape w/bar each GUS125600LD Post Support Bracket 125x600 U shape w/bar each GUS150600LD Post Support Bracket 150x600 U shape w/bar each GRSTB90200 Post Support Bracket 90x200 T blade on rod each GRSTB90300 Post Support Bracket 90x300 T blade on rod each GB090 Post Support Bracket 90xTradesman U type each GB0100 Post Support Bracket 100xTradesman U type each GFT Post Support Bracket 50x6x400 Fish Tail each NET200UB130W Post Support Bracket Ex U beam suit post > 150sq each NET200UB180W Post Support Bracket Ex U beam suit post > 200sq each NET250UB130W Post Support Bracket Ex U beam suit post > 150sq each NET250UB180W Post Support Bracket Ex U beam suit post > 200sq each NET310UB130W Post Support Bracket Ex U beam suit post > 150sq each NET310UB180W Post Support Bracket Ex U beam suit post > 200sq each NET130W33Ø300H Post Support Bracket 130 T blade on pipe each NET130W33Ø600H Post Support Bracket 130 T blade on pipe each NETPBS200 Post Blade Stirrup HDG x 200 long each NETPBS120 Post Blade Stirrup HDG x 120 Long each NETPBS50 Post Blade Stirrup HDG x 50 long each NETH/DUTY150W450H Post Support Bracket 150x450x10 T blade each NETH/DUTY150W750H Post Support Bracket 150x750x10 T blade each NET180CP (Column Stool) 10mm claw plate each ASSORTED BRACKETS AND PLATES NET-SERV 40sq SHS servery bracket 400x600 each NET-DWF 65x8 FMS dwarf wall bracket 300x300 each NET-PERG 50x50 angle pergola bracket x 750 each NET-STEP 3mm pressed step tread bracket each NET-75 Col. Pl. 75x8 FMS column plate x 200 c/w 2-14 dia. each NET-100 Col. Pl. 100x8 FMS column plate x 225 c/w 2-14 dia. each NET-100EA X100X6 bracket x 150 long 4/14 dia each NET-100 EA x100x8 bracket x 200 long 4/14 dia. each NET-150EA x150x10 bracket x 200 long 4/14 dia. each 12

22nd edition Post Support Brackets U shaped with Centre Bar GUS90450

Post) GUS125600LD(125sq Post GUS150600LD(150sq Post) FRAME HARDWARE

GRSTB90300 Post Support Brackets U Type Tradesman GB090 (90sq Post)

Cast into Core Filled Pier GFT400506 Post Support Brackets Ex U Beam to

Brackets Ex U Beam to suit 200sq Posts NET200UB180W NET250UB180W

engineered, Network Steel Fabrications recommends that the purchaser

14 22nd edition Post Support Brackets U shaped with Centre Bar GUS90450 (90sq Post) GUS90600 (90sq Post) GUS (100sq Post GUS (100sq Post) GUS125600LD(125sq Post GUS150600LD(150sq Post) FRAME HARDWARE Post Support Brackets T Blade on Rod To suit Min 90sq Post GRSTB90200 GRSTB90300 Post Support Brackets U Type Tradesman GB090 (90sq Post) GB0100 (100sq Post) Post Support Bracket 50x6 Flat x 400 with Fish Tail Cast into Core Filled Pier GFT Post Support Brackets Ex U Beam to suit 150sq Posts NET200UB130W NET250UB130W NET310UB130W Post Support Brackets Ex U Beam to suit 200sq Posts NET200UB180W NET250UB180W NET310UB180W Disclaimer: - Many of the designs depicted are not engineered, Network Steel Fabrications recommends that the purchaser considers the application and consults their engineer where & when certification is warranted. 13

22 22nd edition edition FRAME HARDWARE Post Support

Post NET130W33Ø300H NET130W33Ø600H Post Blade Stirrup T

130sq Post NETPBS50 NETPBS200 NETPBS120 Post Support

150sq Post NETH/DUTY150W450H NETH/DUTY150W750H Servery

Stools Cast in type with Ø10 Claws To Suit Site Welded

65x8Flat 300x300 Legs (Primed) NET-DWF Pergola Bracket

Brackets Assorted Sizes NET-100EA 150 NET-100EA 200

are not engineered, Network Steel Fabrications

15 22 22nd edition edition FRAME HARDWARE Post Support Brackets 130 Flat T Blade on Ø33 Pipe To Suit min 130sq Post NET130W33Ø300H NET130W33Ø600H Post Blade Stirrup T Blade on Tube with Rod To Suit min. 130sq Post NETPBS50 NETPBS200 NETPBS120 Post Support Brackets Heavy Duty 150w x 10mm Blade To Suit min. 150sq Post NETH/DUTY150W450H NETH/DUTY150W750H Servery Bracket 40sq SHS Duragal 400x600 legs NET-SERV Column Stools Cast in type with Ø10 Claws To Suit Site Welded Steel Posts CLP1806S CLP18010S Dwarf Wall Bracket 65x8Flat 300x300 Legs (Primed) NET-DWF Pergola Bracket 50x50Angle 750lg with M12 Rod NET-PERG Connection Brackets Assorted Sizes NET-100EA 150 NET-100EA 200 NET-150EA 200 Disclaimer: - Many of the designs depicted are not engineered, Network Steel Fabrications recommends that the purchaser considers the application and consults their engineer where & when certification is warranted. 14

16 22nd edition BOLTS TO SUIT FRAME HARDWARE (sold as complete assemblies with bolt, nut and washer) ITEM NO. DESCRIPTION QTY SELL PRICE EX GST Tru Bolts G/TRU-B 12/100 Tru Bolt HDG 12/100 (Std Qty per pack 20 off) each M12 Hex Head Bolt, Nut and Washer Assembly OBM12/100 Hex Head B, N&W 12x100mm HDG (Std Qty per pack 100 off) each OBM12/110 Hex Head B, N&W 12x110mm HDG (Std Qty per pack 75 off) each OBM12/120 Hex Head B, N&W 12x120mm HDG (Std Qty per pack 75 off) each OBM12/130 Hex Head B, N&W 12x130mm HDG (Std Qty per pack 75 off) each OBM12/150 Hex Head B, N&W 12x150mm HDG (Std Qty per pack 75 off) each M12 Cup Head Bolt, Nut and Washer Assembly OCBM12/65 Cup Head B, N&W 12x65mm HDG (Std Qty per pack 150 off) each OCBM12/75 Cup Head B, N&W 12x75mm HDG (Std Qty per pack 150 off) each OCBM12/90 Cup Head B, N&W 12x90mm HDG (Std Qty per pack 100 off) each OCBM12/100 Cup Head B, N&W 12x100mm HDG (Std Qty per pack 100 off) each OCBM12/120 Cup Head B, N&W 12x120mm HDG (Std Qty per pack 100 off) each OCBM12/130 Cup Head B, N&W 12x130mm HDG (Std Qty per pack 75 off) each OCBM12/150 Cup Head B, N&W 12x150mm HDG (Std Qty per pack 75 off) each OCBM12/180 Cup Head B, N&W 12x180mm HDG (Std Qty per pack 75 off) each OCBM12/200 Cup Head B, N&W 12x200mm HDG (Std Qty per pack 75 off) each OCBM12/220 Cup Head B, N&W 12x220mm HDG (Std Qty per pack 50 off) each Post Caps K50MSGBW Square Galvabond Caps 50x50 each K65MSGBW Square Galvabond Caps 65x65 each K75MSGBW Square Galvabond Caps 75x75 each K100MSGBW Square Galvabond Caps 100x100 each 15

17 22 22nd edition edition MISSION: To uphold our reputation and act with integrity in the pursuit of remaining at the forefront of our industry; To build strong relationships with our clients and be recognised for our reliability and professional attitude; To value the contribution of our employees and to create an environment where our team can use their individual strengths and experiences to provide innovative ideas in the construction of quality structural steel and metalwork products and services BENEFITS of dealing with Network Steel Fabrications: Specialists in Custom Made structural steel and metalworks You have access to our reliable, long-term team members for one- on-one consultations to get the right advice using steel to create building solutions Experience and industry knowledge to assure you that we understand your requirements One stop shop all of your structural steel and metalwork needs can be met by our Comprehensive range of products and services including all of your frame hardware requirements Service standards have been set to a high level, a culture stressed throughout our company as critical to our success Capacity with a staff of 50 plus, running two shifts, enables us the ability to provide lead times second to none Hands on management by 3 working directors ensure that customers are valued as the highest priority with responsibility for customer satisfaction at the forefront Extensive service area with regular freight services ranging from Northern NSW, through Brisbane, onto the Sunshine Coast and out to Toowoomba We take away the headaches with our extended services site measuring, CAD detailing, site welding and co-ordinating of rigging where required Realistic lead times determined upon order placement on time, right product HISTORY: The management of Network Steel Fabrications takes a great deal of pride in exceeding our customer s expectations over and above industry performance. Since our establishment in 1992 Network Steel Fabrications has grown from 3 working directors (Peter McConnell, Wayne Buchanan and Glenn Hitchcock) to a staff of 50 plus, this significant growth is testimony to our commitment to offer exceptional value for money through outstanding service to our clients. Network Steel Fabrications continues to uphold a strong sense of responsibility to the community and industry alike, an indication of this commitment is reflected in our substantial investment into apprentice training assuring the industry of a healthy future. Growth in our business is founded on the strong sense of responsibility to uphold a reputation that is dependent upon customer satisfaction. PRODUCTS: Structural beams, columns, lintels, LSB, brackets, stair stringers, bracing, T-Beams, post supports, frame hardware, mild steel and aluminium awnings, window hoods, sunscreens, balustrades, gates and more all made to order 16

Credit Card and EFTPOS Facilities available. Phone Orders welcome Deliveries/Transport arranged

Credit Card and EFTPOS Facilities available. Phone Orders welcome Deliveries/Transport arranged Round, Square, Angle Page 3 Bright, Hollow Bar, Expanded Mesh Page 13 Flat Bar Page 4 House Columns/Posts Page 14 Channel, Structurals Page 5 Roofing, Purlins & Battens Page 15 RHS Square/Rectangular Tube