Shearing, bending, and rolling capabilities are available along with fabricating from hand drawn sketches to engineered drawings.
|
|
|
- Douglas Curtis
- 5 years ago
- Views:
Transcription
1 Tazgo Machine Inc. is a full service stocking warehouse. Items we stock include carbon, aluminum & stainless steel shapes, angles, beams, flats, hex bar, bar grating, squares, CR rounds in 1018,1045 & 4140, square tube, pipe, HR rounds, rebar, Perforated Metal, carbon plates, wear plates, Woven wire, traction tread, steel & fiberglass expanded metal & grip strut. We also stock 660 bronze tube, yellow brass, D rings, Piano Hinges, Butt hinges, Anchor bolts, all thread, nuts & bolts and Pipe fittings. Shearing, bending, and rolling capabilities are available along with fabricating from hand drawn sketches to engineered drawings. TAZGO MACHINE INC. offers machine shop serv ices... milling, turning, threading, drilling, boring, press work and assembly to compliment the full service that Tazgo has to offer. 1
2 2
3 ANGLES Size in 1/2 x 1/2 x 1/8 5/8 x 5/8 x 1/8 3/4 x 3/4 x 1/8 x 3/16 7/8 x 7/8 x 1/8 1 x 5/8 x 1/8 3/4 x 1/8 1 x 1 x 1/8 3/16 1/4 1-1/4 x 1-1/4 x 1/8 3/16 1/4 1-3/8 x 7/8 x 1/8 3/16 1-1/2 x 1-1/4 x 3/16 1-1/2 x 1-1/2 x 1/8 3/16 1/4 3/8 A C B BAR ANGLES Est. Weight, Lbs. Size Est. Weight, Lbs. Per in Per Foot 20 ft. 40 ft. Foot 20 ft. 40 ft x 1-1/4 x 3/16 1/4 2 x 1-1/2 x 1/8 3/16 1/4 2 x 2 1/8 3/16 1/4 5/16 3/8 2-1/2 x 1-1/2 x 3/16 1/4 5/16 2-1/2 x 2 x 3/16 1/4 5/16 3/8 2-1/2 x 2-1/2 x 3/16 1/4 5/16 3/8 1/ /4 x 1-1/4 x 1/ / / /4 x 1-3/4 x 1/ / /
4 ANGLES A C B Size in 3 x 2 x 3/16 1/4 5/16 3/8 1/2 STRUCTURAL ANGLES Est. Weight, Lbs. Size Est. Weight, Lbs. Per in Per Foot 20 ft. 40 ft. Foot 20 ft. 40 ft x 3-1/2 x 1/4 5/16 3/8 1/2 5/ x 2-1/2 x 3/16 1/4 5/16 3/8 1/2 3 x 3 x 3/16 1/4 5/16 3/8 1/ x 4 x 1/4 5/16 3/8 1/2 5/8 3/4 5 x 3 x 1/4 5/16 3/8 1/ /2 x 2-1/2 x 1/ 4 5/16 3/8 1/ x 3-1/2 x 1/4 5/16 3/8 1/2 5/ /2 x 3 x 1/4 5/16 3/8 1/ /4 5 x 5 x 5/16 3/ / /2 x 3-1/2 x 1/ / / / / / x 3-1/2 x 1/ / x 3 x 1/ / / / / /2 5/ TAZGO MACHINE
5 ANGLES Size in 6 x 4 x 5/16 3/8 1/2 5/8 3/4 6 x 6 x 5/16 3/8 1/2 5/8 3/4 1 STRUCTURAL ANGLES Est. Weight, Lbs. Size Est. Weight, Lbs. Per in Per Foot 20 ft. 40 ft. Foot 20 ft. 40 ft x 6 x 1/2 5/8 3/4 1 8 x 8 x 1/2 5/8 3/ /8 9 x 4 x 1/ A C B x 4 x 3/8 1/2 5/8 3/ x 4 x 1/2 5/8 3/
6 AISI Designation BEAMS STANDARD BEAMS (I) A Stocked in Lengths up to 60 A Depth in B Flange Width Web Per Foot 20-Ft. Length Weight Lbs. 30-Ft. Length B C 40-Ft. Length 60-Ft. Length. S3 x S3 x S4 x S4 x S5 x S5 x S6 x , S6 x S7 x x S8 x S8 x S10 x S10 x S12 x S12 x S12 x S12 x S15 x S15 x S18 x S18 x S20 x S20 x S20 x S20 x S24 x S24 x S24 x S24 x S24 x TAZGO MACHINE
7 BEAMS Wide Flange and Miscellaneous Shapes Stocked in Lengths up to 60 Other sizes of beams are produced-please inquire for more information. A B D C Size & Weight Per Foot A Depth In B Flange Width C Flange Web W4 x W5 x W5 x W6 x W6 x W6 x W6x W6 x W6 x W6 x W8x W8x W8 x W8x W8x W8x W8 x W8 x W8x W8x W8 x W8 x W8 x W10 x W10x W10 x W10 x W10 x W10x W10 x W10 x W10 x W10 x W10 x W10 x W10 x W10 x W10 x W10 x W10x W10 x W12 x W12x W12x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x
8 BEAMS Size & Weight Per Foot Wide Flange and Miscellaneous Shapes Stocked in Lengths up to 60 Other sizes of beams are produced-please inquire for more information. A Depth In B Flange Width C Flange A B D Web D D C W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x x x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W16 x W16 x W16 x W16 x W16 x W16 x W16 x W16 x W16 x W16 x W16 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W21 x W21 x W21 x TAZGO MACHINE
9 Size & Weight Per Foot BEAMS Wide Flange and Miscellaneous Shapes Stocked in Lengths up to 60 Other sizes of beams are produced-please inquire for more information. A Depth In inches B Flange Width C Flange A D Web B D C W21 x W21 x W21 x W21 x W21 x W21 x W21 x W21 x W21 x W21 x W24 x W24 x W24 x W24 x W24 x W24 x W24 x W24 x W24 x W24x W24x W27 x W27 x W27 x W27 x W27 x W27 x W27 x W30 x W30 x W30 x W33 x W30 x W30 x W30 x W30 x W33 x W33 x W33 x W33 x W33 x W33 x W33 x W36 x W36 x W36 x W36 x W38 x W36 x W36 x W36 x W36 x W36 x W36 x W36 x
10 STANDARD & JR. CHANNELS Channels Standard Structural Sizes A C B A Depth In Weight Lbs. per Foot B Flange Width C Web Weight Lbs. 20-Ft. 40-Ft. Length Length TAZGO MACHINE
11 MISC. CHANNELS A C B Depth of Channel MC-Shapes (Car and Ship Channels, Junior Channels and Other Miscellaneous Shapes) Estimated Wt. Lbs. Per Foot Flange Width inches Web Weight x x x x x x x x , x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
12 MISC. CHANNELS A C B MC-Shapes (Car and Ship Channels, Junior Channels and Other Miscellaneous Shapes) Depth of Channel Flange Width Web Estimated Wt. Lbs. Per Foot Weight x x x x Bar Channels Stock Length, 20' A C B Size In A B C Est. Weight, Lbs. Per 20-Ft. Foot Length Size In A B C Est. Weight, Lbs. Per 20-Ft. Foot Length 3/4 x 5/16 x 1/ /4 x 3/8 x 1/ /8 x 3/8 x 1/ /8 x 3/8 x 1/ x 3/8 x 1/ x 1/2 x 1/ x 9/16 x 3/ /4 x 1/2 x 1/ /2 x 1/2 x 1/ /2 x 9/16 x 3/ /2 x 3/4 x 1/ /2 x 1/2 x 3/ /4 x 1/2 x 3/ x 1/2 x 1/ x 9/16 x 3/ x 5/8 x 1/ x 1/ x 1 x 3/ /2 x 5/8 x 3/ TAZGO MACHINE
13 ROUND BARS Round Bars We can furnish hot rolled or cold finished round bars in various alloy and carbon steels. Size In Wt. per Ft. Lbs. Wt. per Pc. 20-Ft. 3/ / / / / / / / / / / / / / / / / / / / / / / / / / Size In inches 3 3 1/8 3 1/4 3 3/8 3 1/2 3 5/8 3 3/4 3 7/8 Wt. per Ft. Lbs Wt. per Pc. 20-Ft / / / / / / / / / / / / / / / / Forged rounds through 24 are available. Please inquire
14 SQUARE BARS Size In Wt. per Ft. Lbs. Wt. per Pc. 20-Ft. Square Bars Size In Wt. per Ft. Lbs. Wt. per Pc. 20-Ft. 1/ / / / / / / / / / / / / / / / / / / / / Concrete Reinforcing Bars SIZE Wt./Ft. Per 20 Ft. Per 40 Ft. 3/8" # /2" # /8" # /4" # /8" # " # Wire Mesh ') ') 14 TAZGO MACHINE
15 STRIP Hot Rolled Strip Size Est. Weight, Lbs. In Per Foot 20-Ft. 1/8 x 3/ / / / / / / / / / / / / / Size Est. Weight, Lbs. In Per Foot 20-Ft. 3/16 x 3/ / / / / / / / / / / / / / /4" and thicker-classed as Flat Bars
16 FLAT BARS Flat Bars Size Size Est. Eat. Weight, Lbs. In In Per Per 20-Ft. 20-Ft. Foot Bar Foot Bar Size Size Est. Weight, Weight, Lbs. Lbs. In In Per 20-Ft. 20-Ft. Foot Bar Bar Size Lbs. Est. Est. Weight, Lbs. In Per Foot 20-Ft. Bar 1/4 INCH 5/16 INCH CONT. 7/16 INCH 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /8 INCH 1/2 INCH 3 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /16 INCH 2 1/ / / / / / / / / / / / / / / / / / / TAZGO MACHINE
17 FLAT BARS Flat Bars Size Est. Weight, Lbs. In Per 20-Ft. Foot Bar Size Est. Weight, Lbs. In Per 20-Ft. Foot Bar Size Est. Weight, Lbs. In Per 20-Ft. Foot Bar 5/8 INCH 3/4 INCH CONT. 1 INCH CONT. 3/ / / / / / / /8 INCH 1 1/ /8 INCH 1 5/ / / / / / / / / /4 INCH 3 1/ / / / / / / / / / / / / / / / / /4 INCH / / INCH 5 1/ / / / / / / / / /2 INCH / / / / / / / / / / / / / / / /
18 FLAT BARS Flat Bars Size In Est. Weight, Lbs. Per 20-Ft. Foot Bar Size In Est. Weight, Lbs. Per Foot 20-Ft. Bar Size In Est. Weight, Lbs. Per Foot 20-Ft. Bar 1 1/2 INCH CONT. 2 INCH 3 INCH / / / / / / /4 INCH /2 INCH 2 1/ / / / / / Square Tubing - Size Ga. Lbs./Ft. 1/2" /4" " /4" / TAZGO MACHINE
19 SQUARE TUBING Square Tubing Size Ga. Lbs./Ft. Size Ga. Lbs./Ft. 1 1/2" / / " / / /2" / / " / / / /2" / / / " / / / / / " 3/ / / / / " 3/ / / / / " 3/ / / / / " 3/ / / / / " 3/ / / / / " 1/ / / /
20 TUBING Rectangular Tubing Size Ga. Lbs./Ft. Size Ga. Lbs./Ft. 1 1/2 x x x 1 1/ x 1 1/ /2 x 1 1/ / / x x 1 1/ / /2 x 1 1/ x / / / x / / / x / / x / / x / / / / x 4 3/ / x / / / / x 3 3/ / ,21 5 1/ / x 4 3/ / / / / x 5 3/ / / / / x 2 3/ / x 3 3/ / / x 4 3/ / / / / TAZGO MACHINE
21 TUBING Rectangular Tubing Size Ga. Lbs./Ft. Size Ga. Lbs./Ft. 8 x 6 3/ ,13 10 x / / / / x 2 3/ / / x 2 3/ x 4 1/ / x 6 1/ x 4 1/ / / / x 6 3/ / / PIPE Pipe Dimensions and Weights Normal Pipe Size Outside Dia. I.P.S. Schedule Wall inside Dia. inches Wt./Ft. Pounds 1/ S S Std S Ex. Hvy / S S Std S Ex. Hvy / S S Std S Ex. Hvy
22 PIPE Pipe Dimensions and Weights Normal Pipe Size Outside Dia. I.P.S. Schedule Wall inches Inside Dia. Wt/Ft. Pounds 1/ S S S Std S Ex. Hvy XX. Hvy / S S S Std S Ex. Hvy XX. Hvy S S S Std S Ex. Hvy XX. Hvy / S S S Std S Ex. Hvy XX. Hvy / S S S Std S Ex. Hvy XX. Hvy S S S Std S Ex. Hvy XX. Hvy TAZGO MACHINE
23 PIPE Pipe Dimensions and Weights Normal Normal Outside Wall Inside Pipe Size Dia. I.P.S. Dia. Schedule inches Wt/Ft. Pounds 2 1/ S S S Std S Ex. Hvy XX Hvy S S S Std S Ex. Hvy XX Hvy / S S S Std S Ex. Hvy S S.120 4, S Std S Ex. Hvy XX Hvy S S S Std S Ex. Hvy , XX Hvy S S S Std S Ex. Hvy XX Hvy
24 PIPE Pipe Dimensions and Weights Normal Pipe Size Outside Dia. I.P.S. Schedule Schedule Wall inches Inside Dia. Wt/Ft. Pounds Pounds S S S Std S Ex. Hvy XX Hvy S S S Std S Ex. Hvy S S S Std S Ex. Hvy Std TAZGO MACHINE
25 PIPE Pipe Dimensions and Weights Normal Pipe Size Outside Dia. I.P.S. Schedule Wall inches Inside Dia. Wt/Ft. Pounds Ex. Hvy Std Ex. Hvy , Std Ex. Hvy Std Ex. Hvy
26 PIPE Pipe Dimensions and Weights Normal Pipe Size Outside Dia. I.P.S. Schedule Wall inches Inside Dia. Wt/Ft. Pounds Std. Ex. Hvy Std Ex. Hvy Std Ex. Hvy TAZGO MACHINE
27 SHEETS Sheets Gauge and Size In & Lbs. per Sq. Ft. Wt. per Sheet Gauge and Size In inches & Lbs. per Sq. Ft. Wt. per Sheet 7 ga. 7.5 lb. (.1793") x x x x x x x x x x ga lb. (.1644") 48 x x x x x x x x x x ga lb. (.1345") 48 x x x x x x x x x x ga. 5.0 lb. (.1196") x x x x x x x x x ga Ib. (.1046") x x x x x x x x x ga lb. (.0747") x x x x x x x
28 SHEETS Sheets Hot and Cold Rolled Gauge and Size In & Lbs. per Sq. Ft. Wt. per Sheet Gauge and Size In inches & Lbs. per Sq. Ft. Wt. per Sheet 16 ga. 2.5 lb. (.0598") x x x x ga. 2.0 lb. (.0478") 36 x x x x x x x x ga lb. (.0359") 36 x x x x ga lb. (.0299") 36 x x x x ga. 1.0 lb. (.0239") 36 x x ga..750 lb. (.0179") 36 x x ga..625 lb. (.0149) 36 x x We can furnish sheets sheared to your requirements. Sheets are also available in galvanized. 28 TAZGO MACHINE
29 UNIVERSAL MILL PLATES Universal Mill Plates & Width Est. Weight, Lbs. Per 20-Ft. Foot Length & Width Est. Weight, Lbs. Per 20-Ft. Foot Length 1/4 x /16 x /8 x /2 x /8 x /4 x /8 x
30 UNIVERSAL MILL PLATES Universal Mill Plates & Width Est. Est. Weight, Weight, Lbs. Lbs. Per Per 20-Ft. Foot Foot Length & & Width Width Est. Est. Weight, Weight, Lbs. Lbs. Per Per 20-Ft. 20-Ft. Foot Foot Length 1 x /2 x /2 x x TAZGO MACHINE
31 PLATES Wt. Per Sq Inch Wt. Per Sq. Foot Wt. per Sq. Inch Wt. Per Sq. Foot 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / FLOOR PLATES Wt. Per Sq. Inch Wt. Per Wt. Per Wt. Per Sq. Foot Sq. Inch Sq. Foot 16 ga / ga / ga / / / / / EST WT LBS
32 PLATES Weight Per Sheet - Most Common Sizes SIZE 3/16 1/4 5/16 3/ x x x x x x x x x x SIZE 1/2 5/8 3/4 7/8 1" x x x x x x x x x x TAZGO MACHINE
33 EXPANDED METAL Flattened Expanded Metals Carbon Steel A D C B Size In. and Style No. Width Diamond Opening and Est. Size Size Length Lbs. Dec. In. Dec. In. Sq. Ft. A x B C x D Strand Dec. In. E x F 1/4 - No. 20 1/4 - No. 18 1/2 - No. 20 1/2 - No.18 1/2 - No.16 1/2 - No. 13 3/4 - No. 16 3/4 - No. 14 3/4 - No. 13 3/4 - No No /2 - No. 16 Lt. 1 1/2 - No. 16 Hvy. 1 1/2 -No /2 - No x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
34 EXPANDED METAL Regular Expanded Metals Carbon Steel A D C B Size In. and Style No. Width and Length Diamond Opening Est. Size Size Lbs. Dec. In. Dec. In. Sq. Ft. A x B C x D Strand Dec. In. E x F Overall Thick. Dec. In G 1/4 - No x x x /4 - No x x x /2 - No x x x /2 - No x x x x 96 1/2 - No x x x x 96 1/2 - No x x x x 96 3/4 - No x x x x 96 3/4 - No x x x x x 120 3/4 - No x x x x 96 3/4 - No x x x x x x No x x x /2 - No x x x /2 - No x x x x x x /2 - No x x x x x /2 - No x x x x x /2 No x x x x x No x x x TAZGO MACHINE
35 GRATING Expanded Metal Grating Carbon Steel Est Standard Diamond Diamond Diamond Wt. Sheet Size Size Openings Size Lbs. Style Width Length Width Width Per Inchon by by by Sq. Length Length Width Ft. Dec. In. Dec. in. Dec. In Treadway 48, x x x Hiwalk 48,72 96, x x x Grating 48, x x x , x x x Grating 48,60,72 96, x x x Grating 48 96, x x x Grating 48,72 96, x x X.346 NOTE: All expanded metal dimensions and weights are approximate and subject to mill tolerance. Gratings (Available Smooth or Serrated) B WELDED Typical Dimensions inches A B Types Standard space pattern /16 BEARING BARS Size, In. Size, In. Size, In. Size, In. 1/8 x 3/4 3/16 x 3/4 1/8 x 1 3/16 x 1 1/8 x 1 1/4 3/16 x 1 1/4 1/8 x 1 1/2 3/16 x 1 1/2 3/16 x 1 3/4 3/16 x 2 3/16 x 2 1/4 OTHER SIZES AVAILABLE
36 CONVERSIONS Into Metric Out of Metric If you know Multiply by To Get If you know Multiply by To Get Length Length inches 2.54 centimeters millimeters 0.04 inches foot 30 centimeters centimeters 0.4 inches yards 0.91 meters meters 3.3 feet miles 1.6 kilometers kilometers 0.62 miles Area Area sq. inches 6.5 sq. centimeters sq. centimeters 0.16 sq. inches sq. feet 0.09 sq. meters sq. meters 1.2 sq. yards sq. yards 0.8 sq. meters sq. kilometers 0.4 sq. miles sq. miles 2.6 sq. kilometers hectares 2.47 acres Mass (Weight) Mass (Weight) ounces 28 grams grams ounces pounds 0.45 kilograms kilograms 2.2 pounds short ton 0.9 metric ton metric tons 1.1 short tons Volume Volume teaspoons 5 milliliters milliliters 0.03 fluid ounces tablespoons 15 milliliters liters 2.1 pints fluid ounces 30 milliliters liters 1.06 quarts cups 0.24 liters liters 0.26 gallons pints 0.47 liters cubic meters 35 cubic feet quarts 0.95 liters cubic meters 1.3 cubic yards gallons 3.8 liters cubic feet 0.03 cubic meters cubic yards 0.76 cubic meters Temperature Temperature Fahrenheit Subtract 32, then multiply by 5/9ths to get Celsius Celsius Multiply by 9/5ths, then add 32 to get Fahrenheit 36 TAZGO MACHINE
37 FORMULAS
38 A FULL SERVICE STOCKING WAREHOUSE STEEL SALES BRASS & ALUMINUM SALES STAINLESS STEEL SALES MACHINING FABRICATING REPAIRS WELDING STAINLESS STEEL PHONE: FAX:
39 NOTES 39
40 40 NOTES
YOUR CLEAR CHOICE FOR PREMIUM PACKAGING SOLUTIONS
YOUR CLEAR CHOICE FOR PREMIUM PACKAGING SOLUTIONS Unit of Length Milli (mm) to Inches MM Decimal of inch Approx. Inch MM Decimal of inch Approx. inch 1 0.0394 3/64 14 0.5512 9/16 2 0.0787 5/64 15 0.5906
Presby Steel, LLC. 143 East Milan Road Berlin, NH FAX:
143 East Milan Road 603-752-3022 FAX: 603-752-2821 1 S BEAMS (I Beams) Conforms to ASTM A36 Designation Web Depth/Inches Thickness Flange in Inches Area x Wt./Ft./Lbs. in Inches Width Thickness Sq. In.
Steel Reference Guide
(636) 456-8400 www.warrentonsteel.com 22280 W. Veterans Memorial Pkwy. Warrenton, MO 63383 Toll Free Fax: (866) 537-4554 Steel Reference Guide Phone / Fax / E-mail your orders All major credit cards accepted
PRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM
PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com
ALUMINUM DISTRIBUTING, INC S.W. 2nd Ave. Ft. Lauderdale, FL Table of Contents
Table of Contents Page 2.........Equal & Unequal Angle Structural & Architectural Page 3.......................Flat Bar Structural Page 4.....................Flat Bar Architectural Page 5..... U Channel,
TABLES & CONVERSIONS. Linear Conversions. Mass Conversions. Area Conversions. Mass per Area Conversions. Area per Volume Conversions
TABLES & CONVERSIONS Linear Conversions inches 25.4 millimeters millimeters 0.039 inches feet 0.3 meters meters 3.28 feet yards 0.91 meters meters 1.09 yards miles 1.61 kilometers kilometers 0.62 miles
SERVICES. Plasma Burning Shearing Sawing To Length Pipe and Tube Cutting Bundle Sawing Galvanizing Custom Processing
PRODUCTS Beam Channel Rail Angle Flat Bar Plate Floor Plate Abrasion Resistant / Wear Plate Sheet Galvanized Sheet Round Bar Square Bar Rectangle / Square / Round Tubing Pipe Cold Roll Expanded Metal /
Est No. 1 Handbook of STEEL SIZES & WEIGHTS. For Industry Cross Street Eugene, Oregon USA
Est.1983 Coyote Steel & Co. No. 1 Handbook of STEEL S & S For Industry 2030 Cross Street Eugene, Oregon 97402 USA Phone: 541-461-2060 Toll-free: 1-800-553-0240 FAX: 541-461-0299 Good Steel, Good Service
STEEL PIPE STAINLESS ALUMINUM
STEEL PIPE STAINLESS ALUMINUM valleyiron.com sales@valleyiron.com 800--4766 FRESNO 4 S. Cherry Ave. Fresno, CA 9706 VACAVILLE 797 Elmira Road Vacaville, CA 9687 800--4766 9-48-900 9-44-0279 fax FRESNO
If center column value is F, the C equivalent is to the left. If center column value is C, the F equivalent is to the right.
-40.00-40 -40.0-39.44-39 -38.2-38.89-38 -36.4-38.33-37 -34.6-37.78-36 -32.8-37.22-35 -31.0-36.67-34 -29.2-36.11-33 -27.4-35.56-32 -25.6-35.00-31 -23.8-34.44-30 -22.0-33.89-29 -20.2-33.33-28 -18.4-32.78-27
EXPANDED METAL & GRATING
Expanded Metals* Carbon Steel Regular... 28 Flattened Expanded Metals Carbon Steel... 29 Expanded Metal Grating Carbon Steel Grate-X... 29 Electroforged Grating... 30 Serrated Bearing Bars... 30 Plain
SPECIFICATIONS. General Specifications. Dimensions
General s Engine RPM Setting Spark Plug TX 420 22306 Ser #200000100-200000999 / CH20S-64637 Ser #210000100-240000999 / CH20S-64656 Ser #250000100-270000999 / CH20S-64725 Ser #280000100-280000999 / CH20S-64762
Product Range Handbook
Product Range Handbook 1 Where to find us Building 144 Culham Number 1 Site Station Road CULHAM Oxon OX14 3DA Sales: +44 (0)1865 409300 Fax: +44 (0)1865 407991 2 INDEX PAGE ROUND BARS 4 SQUARE BAR 5 TEES
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN UNIT LEVEL MAINTENANCE INFORMATION ON CARTRIDGE, 40MM: DUMMY, M922A1
TB 9-1300-279-12 DEPARTMENT OF THE ARMY TECHNICAL BULLETIN UNIT LEVEL MAINTENANCE INFORMATION ON CARTRIDGE, 40MM: DUMMY, M922A1 Headquarters, Department of the Army, Washington, DC 10 May 1993 REPORTING
North Dakota. South Dakota. Utah. Idaho. Colorado. Nevada. Washington
Idaho Pacific Steel P.O. Box 530 1900 20th Street North Nampa, ID 83687 (208) 467-2113 1-800-727-9901 Fax (208) 466-9571 Boise Customers Call: (208) 345-3280 Pacific Steel & Recycling P.O. Box 1413 1987
TRUCK, CARGO: M35A1, M35A2, M35A2C, M36A2; TRUCK TANK, FUEL: M49A1C, M49A2C; TRUCK, TANK WATER: M50A1, M50A2, M50A3; TRUCK VAN,
TM9-2320-209-10-1-HR HAND RECEIPT COVERING CONTENTS OF COMPONENTS OF END ITEM (COEI), BASIC ISSUE ITEMS (Bll), AND ADDITIONAL AUTHORIZATION LIST (AAL) FOR 2-1/2 TON, 6X6, M44A1 and M44A2 SERIES TRUCKS
CONTACT INFORMATION. Charleston, WV Location. 901 Brooks Street Charleston, WV Telephone: (304)
CONTACT INFORMATION Poca, WV Location (River Plant) 300 Wright Glass Addition Road PO Box 1029 Poca, WV 25159 Telephone: (304) 755-5638 Sales Fax: (304) 755-8611 Accounting Fax: (304) 755-8589 Charleston,
Elma Steel & Equipment Ltd.
Elma Steel & Equipment Ltd. THE GREAT STEEL PLACE REFERENCE BOOK Forward This handbook is published for Elma Steel & Equipment Ltd. and is distributed as a service to metal users. Elma Steel & Equipment
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Sheet 1 of 5 METRIC CONVERSION Because not all the Contract Documents provided on metric unit contracts
Series Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
ROUTINE. MWO effective date is 1 January 2001 and completion date is 31 December MODIFICATION WORK ORDER MODIFICATION OF 1-1/4 TON VEHICLES
ROUTINE MWO effective date is 1 January 2001 and completion date is 31 December 2004. MODIFICATION WORK ORDER MODIFICATION OF 1-1/4 TON VEHICLES HEAVY VARIANT, ARMAMENT CARRIER, AND EXPANDED CAPACITY VEHICLES
Reference Guide SUPPLY INC.
Reference Guide SUPPLY INC. We have one fundamental mission: getting your job done! No matter what it takes, no matter what your need or schedule, our role as your supplier of steel, stainless steel, aluminum,
STEP LADDER ALUMINIUM
STEP LADDER ALUMINIUM STEP LADDER ALUMINIUM with or without HANDLE Steel Step Ladder Light Grey 6-8 steps W D H h 3-6 steps Features: Light weight Easy to use 3-5 steps 3-6 steps 2-3 steps Certificate
ORDER LO LI-00664G MAY 1975 (Supersedes L dated 6 APRIL 1973)
LUBRICATION ORDER LO 5-4210-217-12 LI-00664G-12 15 MAY 1975 (Supersedes L05-4210-217-12 dated 6 APRIL 1973) TRUCK, FIRE FIGHTING: POWERED PUMPER; FOAM AND WATER 750 G.P.M. CAP.; CENTRIFUGAL PUMP, POWER
Conversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
Length. Area. Volume. OH USA, p
Conversion of Units 1 Length 1 millimeter = 0.0394 inch 1 centimeter = 0.394 inch 1 meter = 39.4 inches 1 meter = 3.2808 feet 1 kilometer = 0.62137 mile 1 inch = 25.4 millimeters 1 inch = 2.54 centimeters
Reference Booklet. Frequently Used Conversion and Calculation Charts.
PM-GFRB-1 $4.00 Reference Booklet Frequently Used Conversion and Calculation Charts. A Canadian Company Propane & Natural Gas Barbecue Outlets Vancouver Calgary Edmonton Saskatoon Winnipeg Toronto Montreal
MODIFICATION WORK ORDER
CHANGE NO. 1 HEADQUARTERS DEPARTMENT OF THE ARMY Washington, D.C., 1 DECEMBER 2001 MODIFICATION WORK ORDER VEHICLE MODEL NSN Truck, Utility, 1-1/4 Ton, 4x4: Cargo/Troop Carrier M998 2320-01-107-7155 Cargo/Troop
Piling Product Guide Edition. Servicesteel.org
Piling Product Guide 2017 Edition Strong Foundations Starith Service Steel Service Steel Supplies All Your Foundation Products You Are Our Number One Priority From industry leading steel sheet piling to
ALUMINUM - TYPE 3003-H14 - STANDARD ALUMINUM - TYPE 3003-H14 - FLATTENED
Catalog - Aluminum Expanded Metal ALUMINUM - TYPE 3003-H14 - STANDARD Standard Sheet Design Size ing Size Strand Size Lbs. Per Size (Feet) Width Length SWO LWO Width Area 1/2"-.051 27 3 & 4 8.500 1.20.375.937.093.051.158
Traction Tread Grating - Design Load Table of Contents & Advantages
- Design Load Table of Contents & Advantages Design Load Tables, aluminum, stainless steel Planks - 7" width... 54 Planks - 10" width... 55 Planks - 12" width... 56 Planks - 10" width, large hole... 57
General Section. Fahrenheit to Celsius Temperature Conversions
General Section Table of Contents Temperature Conversions Days of the Month Periodic Table of the Elements Tables of Common Equivalents Length Area Cubic Liquid Weights Dry Weights Energy Time Amounts
HEADQUARTERS, DEPARTMENT OF THE ARMY
* TM 5-6115-465-10-HR DOD MODEL MEP-005A MEP-104A MEP-114A DOD MODEL MEP-005AWF MEP-005AWE MEP-005ALM MEP-005AWM HAND RECEIPT MANUAL COVERING END ITEM/COMPONENTS OF END ITEM (COEI), BASIC ISSUE ITEMS (BII)
Series Low Pressure Steam Boiler Safety Valves
14-200 Series Low Pressure Steam Boiler Safety Valves ASME Section IV Set pressures from 5 to 15. Sizes 2", 2-1/2" and 3". Section IV Heating Boilers Applications: The 14 Series is an ASME Section IV high
311 Conversion Factors
311 Conversion Factors Master Converter Some excellent software for converting from nearly any unit of measure to another can be purchased for US$15.00 from Savard Software. Download it from this site
TECHNICAL MANUAL ARMY AMMUNITION DATA SHEETS FOR LAND MINES (FSC 1345)
TECHNICAL MANUAL ARMY AMMUNITION DATA SHEETS FOR LAND MINES (FSC 1345) DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. HEADQUARTERS, DEPARTMENT OF THE ARMY 1 SEPTEMBER
2 Which is the most reasonable unit to measure the capacity of a small oil can?
Name: ate: 1 How many cups are in a quart of milk? 2 4 8 16 2 Which is the most reasonable unit to measure the capacity of a small oil can? fluid ounces cups pints gallons 3 How many cups are in a quart
correlated to the Virginia Standards of Learning, Grade 6
correlated to the Virginia Standards of Learning, Grade 6 Standards to Content Report McDougal Littell Math, Course 1 2007 correlated to the Virginia Standards of Standards: Virginia Standards of Number
GENERAL CONVERSION FORMULAE
Conversion Tables GENERAL CONVERSION FORMULAE inches millimetres 25.4 millimetres inches 0.0394 inches centimetres 2.54 centimetres inches 0.3937 feet metres 0.3048 metres feet 3.281 yards metres 0.9144
Competitors must be in proper dress, navy blue or khaki pants and JUMP chapter polo shirt in school colors.
Purpose: Description: Dress Code: To encourage Middle School Health Science Students to improve their ability to identify, solve, and apply mathematical principles involving temperature, weights, and measures
LARGEST STOCK OF METRIC SIZE METALS IN AMERICA
WWW.METRICMETAL.COM METRIC SIZE METALS REFERENCE GUIDE 2009 ISO 9001:2000 Certifi ed LARGEST STOCK OF METRIC SIZE METALS IN AMERICA Our highly trained sales staff is waiting for your calls. With more than
ROUTINE. MWO effective date is 1 September 2002 and completion date is 31 December 2003.
ROUTINE MWO effective date is 1 September 2002 and completion date is 31 December 2003. MWO 9-2320-387-20-1 MODIFICATION WORK ORDER MODIFICATION OF 1-1/4 TON VEHICLE EXPANDED CAPACITY VEHICLE M1113 AND
PLUMBING MATHEMATICS
PLUMBING MATHEMATICS A review of basic fundamentals of mathematics is essential to successful applications of plumbing principals. An acceptable reference that may be used during your examination is Mathematics
POCKET GUIDE for TROUBLESHOOTING Gas Products To be used by F.P.I. trained service technicians only.
POCKET GUIDE for TROUBLESHOOTING Gas Products To be used by F.P.I. trained service technicians only. 908-489 02/26/99 Table of Contents Tools and Instruments...3 Problem A Pilot not igniting after repeated
TABLE OF CONTENTS. Safety Grating ALABAMA METAL INDUSTRIES CORPORATION
TABLE OF CONTENTS Safety Grating Page Diamond-Grip Channel... 1-6 Diamond-GripWalkway... 7-8 Safety-Grip Channel... 9-12 Safety-Grip Walkway...13-14 Safety-Tread Channel...15-16 Safety-Tread Flooring...17-18
Long Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
FOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE PAGE 30
COLD ROLLED STEEL ROUND, SQUARE, FLAT, HEX AND S.S. ROUND, THREADED ROD 1018 COLD ROLLED STEEL ROUND 3 1/8 --- -- 101218 $.60 103618 $1.60 3/1 --- -- 1012316.65 1036316 1.75 1/4 --- -- 101214.95 103614
Objectives: I can convert units using conversion factors in the same system. I can convert units using conversion factors between systems.
Unit 1: Relationships between Quantities and Reasoning with Equations Lesson 1- Converting Units Objectives: I can convert units using conversion factors in the same system. I can convert units using conversion
Metric Conversion Factors
Acres (a) 0.4047 Hectare (ha) Acres 43,560 Sq. feet (ft 2 ) Acres 0.00405 Sq. kilometer (km 2 ) Acres 4047 Sq. meter (m 2 ) Acres 4840 Sq. yards (yd 2 ) Acre-feet 325,851 Sq. feet (ft 2 ) Acre-feet 43560
BOSS STEEL Metal Reference Book Version 9
Intro BOSS STEEL Metal Reference Book Version 9 This ninth edition of the Boss Steel Metal Reference Book has been designed to inform and assist you in making the right decision when it comes to acquiring
End of Topic Test Form A
Unit Rates and Conversions End of Topic Test Form A Name M2, Topic 3- Study Guide Date 1. Use the double number line to convert 7 yards to feet. 2. Use the double number line to convert 160 cups of water
Gandy Positive Displacement Metering System
Gandy Positive Displacement Metering System Row Pesticide Applicators (PDM, PDA & Poly-PDMS) Rate Charts Note: Field calibration is required before making application. These charts are only guides for
Name Date Class Practice A
Practice A Dimensional Analysis Determine if each conversion will result in a larger or smaller quantity. 1. kilometers to meters 2. ounces to quarts. months to days Convert each measure. 4. 450 grams
Technical Support Guide for High Performance Coatings Carboline Company
Technical Support Guide for High Performance Coatings Carboline Company 350 Hanley Industrial Court St. Louis, MO 63144 800-848-4645 www.carboline.com INDEX Page How to Specify Blasting 1 Abrasive/Profile
DEPARTMENT OF THE ARMY TECHNICAL MANUAL
DEPARTMENT OF THE ARMY TECHNICAL MANUAL EQUIPMENT SERVICEABILITY CRITERIA FOR POWER PLANT, UTILITY, PORTABLE, GAS TURBINE ENGINE DRIVEN, SKID MTD, AIRESEARCH MDL PPU85-5 NON- WINTERIZED, FSN 6115-937-0929,
CARGO CONTROL PRODUCTS VGD
CARGO CONTROL PRODUCTS VGD This is at your service Since 1960, Steel Ltd., a sister Company of Ringball Corporation, has been supplying specialty steels and steel products to North American Industries.
TAPE EXTENSOMETER Model CONVEX-D. Roctest Limited, All rights reserved.
INSTRUCTION MANUAL TAPE EXTENSOMETER Model Roctest Limited, 2013. All rights reserved. This product should be installed and operated only by qualified personnel. Its misuse is potentially dangerous. The
BREAKER, PNEUMATIC TIRE (STANDARD WHEEL AND RIM CO.) (NSN ) HEADQUARTERS, DEPARTMENT OF THE ARMY NOVEMBER
TECHNICAL MANUAL Operator's, Organizational, Direct Support and General Support Maintenance Manual Including Repair Parts List for BEAD BREAKER, PNEUMATIC TIRE (STANDARD WHEEL AND RIM CO.) (NSN 4910-00-773-9341)
1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
Company Profile. Our parent Company. KWS A member of the THIELE-Group
G r a d e 8 0 GK8 by THIELE Company Profile Our parent Company The company was founded in 935 by August Thiele. Chains were even welded in forge with only 8 employees. Later on automatic bending and welding
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN MAINTENANCE INFORMATION ON ROCKET, 2.75-INCH, FLECHETTE: M255E1 WARHEAD WITH M439 RC FUZE, WITH MK66 MOD 2 MOTOR Approved for public release, distribution unlimited.
5 (8383): Which of the following is the square root of (-1776)/(-2) - 632? A: 128. B: 256. C: 16.
AMT1010 All 69 FAA Math questions. Name: Note: Answers are given on last page. 1 (8379): What power of 10 is equal to 1,000,000,000? A: 10 to the sixth power. B: 10 to the tenth power. C: 10 to the ninth
Section 10 Chapter 20
Section 10 Chapter 20 24 Valve, 8.3 Liter Engine Specifications Note: All coding used in the 8.3 Liter and 9 Liter engine manuals are Cuins engine codes. These engine codes have no meaning to New Holland
JET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
When Time is Everything... We Manufacture in Days - Not Weeks!
When Time is Everything... We Manufacture in Days - Not Weeks! DAMPERS ACCESS DOORS LOUVERS July 2014 Specializing In Products For The HVAC Industry 763-783-7173 fax: 763-785-6977 1-800-297-9360 Customer:
DEPARTMENT OF THE ARMY TECHNICAL MANUAL OPERATOR'S MANUAL KIT, SPARK PLUG CLEANING (ALLEN ELECTRIC AND EQUIPMENT CO., MODEL 30-99) ( )
TM 9-4910-454-10 DEPARTMENT OF THE ARMY TECHNICAL MANUAL OPERATOR'S MANUAL KIT, SPARK PLUG CLEANING (ALLEN ELECTRIC AND EQUIPMENT CO., MODEL 30-99) (4910-786-9271) This copy is a reprint which includes
HAND RECEIPT COVERING CONTENTS OF COMPONENTS OF END ITEM (COEI), BASIC ISSUE ITEMS (BII), AND ADDITIONAL AUTHORIZATION LIST (AAL)
HAND RECEIPT COVERING CONTENTS OF COMPONENTS OF END ITEM (COEI), BASIC ISSUE ITEMS (BII), AND ADDITIONAL AUTHORIZATION LIST (AAL) FUEL SYSTEM, SUPPLY POINT MODEL LAB 6891 NSN 4930-01-347-4793 DISTRIBUTION
GRATE-LOCK PRODUCT SPECIFICATIONS. GRATE-LOCK Plank with Grip or Smooth Surface. 1-1/2", 2-1/2", 3" (4" special order)
QUALITY HOLE PRODUCTS PLANK GRATING McNICHOLS Quality Plank Grating includes a variety of channel configuration choices and walkway styles. Plank Grating is a one-piece construction product that is lightweight
Perf-O Grip Grating & Traction Tread Flooring
GSPOGTT-09 Perf-O Grip Grating & Traction Tread Flooring For Safe Walking-Working Surfaces Table of Contents General Information................................................. 3-4 Load Information.........................................................
DEPARTMENT OF THE ARMY TECHNICAL MANUAL
TM 55-4940-208-10-1 DEPARTMENT OF THE ARMY TECHNICAL MANUAL Transportability Guidance SHOP EQUIPMENT, GENERAL PURPOSE REPAIR, SEMITRAILER MOUNTED, COUSE MANUFACTURE, MODEL MEDL Headquarters, Department
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
ROUTINE DEPARTMENT OF THE ARMY TECHNICAL BULLETIN ANNOUNCEMENT OF APPROVAL AND RELEASE OF NONDESTRUCTIVE TEST EQUIPMENT INSPECTION PROCEDURE MANUAL TM 1-1520-265-23, TECHNICAL MANUAL AVIATION UNIT MAINTENANCE
B-LINE SERIES SGPC-16. Safety gratings. Safety gratings. Safety for every walk of life
Safety gratings SGPC-16 B-LINE SERIES Safety gratings Safety for every walk of life Product Applications Grip Strut Eaton s B-Line series safety grating offering is ideal for a wide variety of applications.
VIBRATING WIRE SURFACE STRAIN GAUGE. Model SM-5B. Roctest Limited, All rights reserved.
INSTRUCTION MANUAL VIBRATING WIRE SURFACE STRAIN GAUGE Model Roctest Limited, 2012. All rights reserved. This product should be installed and operated only by qualified personnel. Its misuse is potentially
FOR MORE INFORMATION CALL CLARK GENERAL ENGINEERING INFORMATION WARNING & SAFETY REMINDER...
GENERAL ENGINEERING INFORMATION Index Section L WARNING & SAFETY REMINDER..................................................OPPOSITE PAGE ITEM PAGE HORSEPOWER/TORQUE..............................................................
Z Master Z400 Series Service Manual
LCE Products Z Master Z400 Series Service Manual ABOUT THIS MANUAL This service manual was written expressly for Toro service technicians. The Toro Company has made every effort to make the information
Show What You Know. 4. The packaging on a juice container says it contains 2,000 milliliters. How many liters of juice does the container hold?
L ERS LESSON onverting Measurements Show What You Know efore you begin this lesson on converting measurements, answer these questions. hoose the letter of the correct answer for each problem. 1. 4 ft in.
Grip Strut Safety Grating
GSSGST-09 Grip Strut Safety Grating Platforms, Walkways & Stair Treads For The Safest Walking-Working Surfaces Table of Contents & Advantages Advantages............................................. 2 Proof
ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
Safety Grating DIAMOND-GRIP PRODUCT DESCRIPTION FEATURES & BENEFITS MATERIAL SPECIFICATIONS. Note:
DIAMOND-GRIP PRODUCT DESCRIPTION Diamond-Grip is a one-piece metal plank grating manufactured by a cold forming process in the shape of a channel. The web of the channel is the walking surface and has
INDEX ABOUT OUR GROUP... 5 UNIVERSAL BEAMS... 6 UNIVERSAL COLUMNS... 9 EUROPEAN SPECIFICATION BEAMS WITH PARALLEL FLANGES... 10
PRODUCT CATALOGUE 1 2 3 INDEX ABOUT OUR GROUP... 5 UNIVERSAL BEAMS... 6 UNIVERSAL COLUMNS... 9 EUROPEAN SPECIFICATION BEAMS WITH PARALLEL FLANGES... 10 MS CHEQUERED SHEETS... 13 CHANNELS... 14 HOT ROLLED
To view this document 2-up:
JANUARY Choose page display under the view menu, select Two Page View/Two-Up) and Show Cover Page in Two Page View/During Two-Up. Navigation: Choose the date opposite to go directly to the page or use
For Use in CCO Written Examinations REFERENCE BOOKLET. This supplement is not to be used for any other purpose.
For Use in CCO Written Examinations REFERENCE BOOKLET RIGGER This Reference Booklet has been produced and adapted from various manufacturers data and is for use in CCO Written Examinations. This supplement
ARROW INDUSTRIAL PRODUCTS
IP-2R ARROW INDUSTRIAL PRODUCTS For Applications in Industrial, Power Plant & Commercial Projects ARROW UNITED INDUSTRIES ARROW UNITED INDUSTRIES has specialized in the manufacturing of air control products
Estimated Cable Fill Width in (mm) in 2 mm 2.30 OD. Cable Fill Area
ONTRAC WIRE MESH CABLE TRAY SYSTEM OnTrac Wire Mesh Cable Tray System CPI s OnTrac Wire Mesh Cable Tray System is an excellent solution for indoor cable pathway applications to create point-to-point pathways
Chapter 2: Approaches to Problem Solving Lecture notes Math 1030 Section A
Section A.1: You Can t Add Apples and Oranges Definition of units The units of a quantity describe what is measured or counted. We cannot add or subtract numbers with different units, but we can multiply
Cable Festoon Systems - For Moving Machinery
Cable Festoon Systems - For Moving Machinery CONDUCTIX offers a comprehensive range of Cable Festoon Systems to power moving machinery. Our festoon systems are ideal for supporting, protecting, and managing
Paramax Series Control Ball Valve. Specification Data CM6004 7/97
Paramax Control Ball Valve Specification Data CM6004 7/97 Table of Contents Numbering System........................ 3 Specifications............................ 4 Seal Ring Limitations......................
Metric Service. ISO 9001 Certified. Parker Steel Company Distribution Center in Toledo, Ohio
Click Here to Visit MetricMetal.com 2018 Parker Steel Metric Metals Reference Guide Parker Steel s New Offices at 1625 Indian Wood Circle, Maumee, Ohio 43537 The Largest Stock of Metric Size Metals in
MATERIAL LIST PD7C. PACR WINCH DIVISION P.O. Box 547 Broken Arrow, Oklahoma PHONE: (918) FAX: (918)
PD7C MATERIAL LIST PACR WINCH DIVISION P.O. Box 57 Broken Arrow, Oklahoma 7013 PHONE: (9) 851-8511 FAX: (9) 259-1575 www.paccarwinch.com LIT-222 R2 12/2008 Printed in U.S.A. Copyright 2008 PACCAR Winch
SECTION PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
31 JANUARY 2011 THIS MANUAL SUPERSEDES LO DATED 13 MARCH 1992 AND LO DATED 31 AUGUST 1992.
LUBRICATION ORDER 31 JANUY 2011 THIS MANUAL SUPERSEDES LO 5-5420-202-12 DATED 13 MCH 1992 AND LO 5-5420-226-12 DATED 31 AUGUST 1992. LUBRICATION ORDER FOR LAUNCHER: M48A5 TANK CHASSIS, TRANSPORTING FOR
WE WROTE THE BOOK ON MUD PUMPS.
WE WROTE THE BOOK ON MUD PUMPS. AMC is a full service distributor of Weatherford Mud Pumps along with Weatherford s new Ellis Williams mud pump line. We can offer either of these pumps under our distributorship
COMMERCIAL HYDRONIC PRODUCTS A MESTEK COMPANY. Convectors STEAM AND HOT WATER RADIATION CC-14
COMMERCIAL HYDRONIC PRODUCTS A MESTEK COMPANY Convectors STEAM AND HOT WATER RADIATION CC-1 Sterling Convectors are engineered for both forced hot water and two-pipe steam heating system installation with
CARBON STEEL PIPE - BUTTWELD
010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 8.00 6.09 16.40 14.28 1/4" 0.42 9.61 8.25 15.27 12.91 3/8" 0.57 10.98 9.52 16.91 14.39
Plank Walkway Treads Rungs
Plank Walkway Treads Rungs Safer Serrated Surface Easy Install Maintenance Free Design High Load Capacity Versatile in Application Long Life GRIP STRT Non-serrated Surface Special Order 5 diamond plank
bar grating USA: Fisher & Ludlow, Inc. Canada: Fisher & Ludlow
bar grating SA: Fisher & Ludlow, Inc. anada: Fisher & Ludlow introduction Quality People Delivering Quality Products and Services Today s construction projects demand the highest quality standards and
LOW STATIC FAN COIL UNITS District Cooling Chilled Water Application
STATIC FAN COIL UNITS District Cooling Chilled Water Application CLASSIFIED INSULATION & FILTER MEDIA GFC LD Series Cooling Capacity Range 9,690 yo 46,064 BTU/HR (4 ROWS ) GFC-LD-TC-10-13 3 General Specifications
Series 2, 3, 4 Steel Cable Ladder Steel Cable Ladder, Series 2, 3, 4 & 5
Cable Ladder with Slotted Rung (shown with alternating slot orientation) Cable Ladder with Slotted Rung (shown with continuous slot down - also available with continuous slot up) HDS-1 Steel Cable Ladder,
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers