ALUMINUM - TYPE 3003-H14 - STANDARD ALUMINUM - TYPE 3003-H14 - FLATTENED

Transcription

1

2 Catalog - Aluminum Expanded Metal ALUMINUM - TYPE 3003-H14 - STANDARD Standard Sheet Design Size ing Size Strand Size Lbs. Per Size (Feet) Width Length SWO LWO Width Area 1/2" & /2" & /4" & /4"-.081 (Lt.) 32 3 & /4"-.081 (Hvy.) 41 3 & /4" & /2" & /2" & Other alloys (5005, 1100, 5052, etc) and tempers available upon inquiry. Also look at the section on Mini-Mesh for other aluminum sizes. ALUMINUM - TYPE 3003-H14 - FLATTENED Standard Sheet Design Size ing Size Strand Size Lbs. Per Size (Feet) Width Length SWO LWO Width Area 1/2" & /2" & /4" & /4"-.081 (Lt.) 30 3 & /4"-.081 (Hvy.) 39 3 & /4" & /2" & /2" & Other alloys (5005, 1100, 5052, etc) and tempers available upon inquiry. Also look at the section on Mini-Mesh for other aluminum sizes.

3 Catalog - Carbon Expanded Metal CARBON STEEL - STANDARD Lbs. Per Standard Sheet Design Size ing Size Strand Size Size (Feet) Width Length Plain Galv. Wt. SWO LWO Width Area 1/4"-# /4"-# /2"-# /2"-# & 6 8 & /2"-# & 6 8 & /2"-# & 6 8 & /4"-# & 6 8 & /4"-# & 6 8 & /4"-#10 (13 ga.) & 6 8 & /4"-# & 6 8 & "-# /2"-# /2"-# /2"-# & 6 8 & /2"-#10 (13 ga.) & 6 8 & /2"-# & 6 8 & /2"-#6 (6 ga.) & 6 8 & "-#10 (13 ga.) "-# For smaller sizes, see Mini-Mesh CARBON STEEL - FLATTENED Lbs. Per Standard Sheet Design Size ing Size Strand Size Size (Feet) Width Length Plain Galv. Wt. SWO LWO Width Area 1/4"-# & /4"-# & /2"-# & /2"-# & 6 8 & /2"-# & 6 8 & /2"-# & 6 8 & /4"-# & 6 8 & /4"-# & 6 8 & /4"-# & 6 8,10& /4"-#10 (13 ga.) /4"-# & 6 8,10& "-# & /2"-# & /2"-# & /2"-# & 6 8 & /2"-# & 6 8,10&

4 Catalog - Stainless Steel Expanded Metal STAINLESS - TYPE STANDARD Standard Sheet Design Size ing Size Strand Size Lbs. Per Size (Feet) Width Length SWO LWO Width Area 1/2"-# & /2"-# & /2"-# & /4"-# & /4"-# & /4"-# & /4"-# & /2"-# & /2"-# & /2"-# & STAINLESS - TYPE FLATTENED Standard Sheet Design Size ing Size Strand Size Lbs. Per Size (Feet) Width Length SWO LWO Width Area 1/2"-# & /2"-# & /2"-# & /4"-# & /4"-# & /4"-# & /4"-# & /2"-# & /2"-# & /2"-# &

5 Catalog - Grating & Machine Guards Grating is the most economical industrial walking surface you can install in your plant. Walking surface is anti-skid, providing safe foothold. The open design allows effective sprinkler coverage for fire protection; prevents dirt, grease or snow accumulation; it enables a visual 'see-through' area inspection; lowers maintenance costs. Expanded Solutions grating costs less than bar-type or sheet metal grating and is easier to install in new or replacement applications. Please Note: The information provided is for descriptive purposes only - NOT FOR DESIGN Lbs. Per 100 Sq. Ft. lb. lb. 4.0 lb lb lb. 5.0 Standard Sheet Size (Feet) CARBON STEEL - Grating Size Chart Design Size ing Size SWO LWO Width 4 & & & 6 4 & & 6 Strand Size 8,10 & & & & Area Aluminum Type 5052-H lb Please Note: This information is for descriptive purposes only - NOT FOR DESIGN 24" SPAN 36" SPAN 48" SPAN Concentrated & Uniform Load Deflection Tables/Fixed Span Carbon Steel Style - Lbs. Per Sq. Ft. Aluminum Load D Load D Load D Load D Load D Load D Load D Load D U C U C U C U - Uniform Load in Lbs. Per Sq. Ft. C - Concentrated Load in Lbs. Per Sq. Ft. D - Deflection in inches CONCENTRATED LOAD (Lbs. Per Foot of Length of Catwalk or Platform) 50 Lbs. Light or occasional pedestrian traffic Selection Chart (Carbon Steel)* CLEAR SPAN (Distance between supports, measured from the inside edge of one support to the inside edge of the next support.) 23" 30" 35" 42" 47" 54" 60"

6 100 Lbs. Normal or frequent pedestrian traffic Lbs. Heavy or constant pedestrian traffic Lbs. Pedestrian traffic with light equipment Lbs. 300 Lbs. 350 Lbs. * Sizes listed do not imply availability The concentrated load deflections for this chart do not exceed the 1/4" maximum deflection as stated by Federal Specification RR-G-661B and the generally accepted recommendation for normal pedestrian comfort. Installation Procedures For maximum load, position Long Way of Design parallel to the clear span. LWD must be installed parallel to span. Butt or overlap one half of design. No increase in overall thickness Bolt or weld every 6 inches or every fourth design to rigid supports. Install with straight edge up (top - straight edge, bottom - rounded edge). Bonds of adjoining should slope in same direction and align with adjoining pieces.

7 This information is provided for illustration purposes only - NOT FOR DESIGN. Confirm all load information with your engineer or architect. Machine Guards - OSHA Expanded Metal Size Chart * Clearance From Moving Parts At All Points. Largest Mesh Approved Minimum Gauge or Recommended Expanded Metal Style Number under 4" 1/2" #18 1/2"-#18 STD 1/2"-#16 FLAT or STD 1/2"-#13 FLAT or STD 4" - 15" 2" #13 1/2"-#13 FLAT or STD 3/4"-#9 FLAT or STD 1 1/2"-#9 FLAT or STD *Extract from Table 0-12 OSHA Table of Standard Material and Dimensions. Subpart 0, Machine Guarding, Paragraph , Page

8 Catalog - Mini-Mesh STEEL - MINI-MESH ALUMINUM - MINI-MESH Design Size ing Size Strand Size Lbs. Per SWO LWO Width 1/8"-24 ga. STD /8"-24 ga. FLAT /16"K-24 ga. STD /16"K-24 ga. FLAT /16"K-22 ga. STD /16"K-22 ga. FLAT /16"-22 ga. STD /16"-22 ga. FLAT /16"-24 ga. STD /16"-24 ga. FLAT /4"-Hex 24 ga. STD /4"-Hex 24ga. FLAT /4"-Hex 22 ga. STD /4"-Hex 22ga. FLAT /16"-Round 24 ga. STD /16"-Round 24ga. FLAT /16"-Round 22 ga. STD /16"-Round 22ga. FLAT /8"-16 ga. STD* /8"-16 ga. FLAT* /8"-20 ga. STD* /8"-20 ga. FLAT* /8"-22 ga. STD* /8"-22 ga. FLAT* * Also available in stainless, aluminum and copper. Please contact us for specs. Design Size ing Size Strand Size Lbs. Per SWO LWO Width 1/8"-.032 STD /8"-.032 FLAT /8"-.040 STD /8"-.040 FLAT /16"K-.032 STD /16"K-.032 FLAT /16"K-.040 STD /16"K-.040 FLAT /16"-.032 STD /16"-.032 FLAT /16"-.040 STD /16"-.040 FLAT /4"-Hex.032 STD /4"-Hex.032 FLAT /4"-Hex.040 STD /4"-Hex.040 FLAT * Most sizes are also available in copper Expanded Solutions also produces Mini-Mesh in 3/32", 5/16", 1/2", and many other special sizes. If you have a unique requirement, we have your solution! Use our Contact Us page to inquire about your item.

9 Catalog - Sun Shade & Micro-Mesh Lbs. Per STEEL - SUN SHADE Design Size ing Size Strand Size SWO LWO Width 1/2"-# /2"-# /2"-# /2"-#20 Lt /2"-#20 Hvy /2"-#16 Lt /2"-#16 Hvy ALUMINUM - SUN SHADE Lbs. Per Design Size ing Size Strand Size SWO LWO Width 5/16"-.040 STD /2" /2" /2"-.050 Lt /2"-.050 Hvy /2"-.080 Lt /2"-.080 Hvy STEEL* - MICRO-MESH Design Size ing Size Strand Size Lbs. Per SWO LWO Width AEM AEM AEM See also our section on Mini-Mesh * Also available in aluminum and copper