LARGE MESH RANGE. 07 Profile. 09 Profile. 12 Profile. 15 Profile. LWM 19.0mm. LWM 28.0mm. LWM 30.0mm. LWM 38.0mm. SWM 7.0mm. SWM 9.0mm. SWM 12.

Size: px

Start display at page:

Download "LARGE MESH RANGE. 07 Profile. 09 Profile. 12 Profile. 15 Profile. LWM 19.0mm. LWM 28.0mm. LWM 30.0mm. LWM 38.0mm. SWM 7.0mm. SWM 9.0mm. SWM 12."

Philip Cox
5 years ago
Views:

2 LARGE MESH RANGE 07 Profile 7.0mm LWM 19.0mm 09 Profile 9.0mm LWM 28.0mm 12 Profile 12.0mm LWM 30.0mm 15 Profile 15.0mm LWM 38.0mm 1

3 LARGE MESH RANGE LARGE STEEL Mesh Reference Standard Nominal Sheet Sizes (mm) Nominal Size of Mesh (mm) Nominal Size of Mesh Opening (mm) Approx. Strand Size (mm) LW SW LWM LWO SWO Width Thick Weight Kg/m 2 Overall Height (mm) % Open Area Raised Norm-Max L Flat Also available in Galvabond, Hot dipped Galv and Stainless steel LARGE ALUMINIUM 07-10A A AL A A A A A A A AL A Non standard sheet sizes available. Conditions apply. All of the above mesh can be supplied flattened. The flattening process will increase the O/A size of expanded sheets. Unless specified, flattened sheets will not be trimmed. Flattened Profiles will be thinner than the original material thickness. 2

4 LARGE MESH RANGE 19 Profile 19mm LWM 50mm 25 Profile 25mm LWM 60mm 38 Profile 38mm LWM 76mm 3

5 LARGE MESH RANGE LARGE STEEL Mesh Reference Standard Nominal Nominal Size Nominal Size of Approx. of Mesh (mm) Strand Size (mm) % Open Area Sheet Sizes (mm) Mesh Opening (mm) Weight Overall Kg/m 2 Height Raised LW SW LWM LWO SWO Width Thick (mm) Flat Norm Max CY Also available in Galvabond, Hot dipped Galv and Stainless steel LARGE ALUMINIUM 19-16A A A A A A A ACY Non standard sheet sizes available. Conditions apply. All of the above mesh can be supplied flattened. The flattening process will increase the O/A size of expanded sheets. Unless specified, flattened sheets will not be trimmed. Flattened Profiles will be thinner than the original material thickness. Stag Ends: Incomplete strands existing beyond the joints of a mesh either LWD, SWD or both. Galvanising: Hot dipped galvanising carried out to AS/NZS4680:2006. Distortion and windowing effect can occur to small steel range through to 15 profiles. Windowing effect is particularly prevalent on flattened meshes. Locker part numbers often combine the mesh reference with a suffix to denote different variations of the product e.g. A Aluminium G F L CY Hot Dip Galvanised Flattened Lightweight version Cyclone tested 4

6 LARGE MESH RANGE LARGE STEEL Mesh Reference Standard Nominal Nominal Size Nominal Size of Approx. % Open Area Sheet Sizes (mm) of Mesh (mm) Mesh Opening (mm) Strand Size (mm) Overall Weight Raised LW SW LWM LWO SWO Width Thick Kg/m 2 Height (mm) Flat Norm Max Also available in Galvabond, Hot Dipped Galv and Stainless steel LARGE ALUMINIUM 50-30A A Non standard sheet sizes available. Conditions apply. All of the above mesh can be supplied flattened The flattening process will increase the O/A size of expanded sheets. Unless specified, flattened sheets will not be trimmed. Flattened Profiles will be thinner than the original material thickness. 50 Profile 50mm LWM 102mm 5

MET EDGE TRIMS EXPANDED METAL MET EDGE TRIMS EXPANDED METAL Reference Length (mm) Width W (mm) Gap G (mm) Thickness T (mm) Met 4 2440 19 4 1.2 Met 6 2440 25 6 1.6 Met 8 2440 25 8 1.

7 MET EDGE TRIMS EXPANDED METAL MET EDGE TRIMS EXPANDED METAL Reference Length (mm) Width W (mm) Gap G (mm) Thickness T (mm) Met Met Met Met Edge Trim Selection Guide Met 4 Met 6 Met 8 Met CY L 1220 LV10 HVO LV16 HVO L7609 HDMS L DMS SP 2520 JE JE1112 Standard Edge Trims are manufactured from Galvabond material Other materials and sizes are available - conditions apply 6

8 SMALL MESH RANGE mm LWM 6.0mm mm LWM 10.0mm 217F 6.0mm LWM 10.0mm mm LWM 15.0mm R mm LWM 12.7mm 7

9 SMALL MESH RANGE SMALL STEEL RAISED Mesh Reference Standard Nominal Sheet Sizes (mm) Nominal Size of Mesh (mm) Approx. Strand Size (mm) % Open Area LW SW LWM Width Thick Weight Kg/m 2 Raised Norm-Max Flat R Also available in Galvabond and custom sheet sizes. Some of the above profiles are available in Stainless Steel. These meshes are not available hot dipped galv. SMALL STEEL FLATTENED 226F F Also available in Galvabond and custom sheet sizes. Some of the above profiles are available in Stainless Steel. These meshes are not available hot dipped galv. The flattening process will increase the O/A size of expanded sheets. Unless specified, flattened sheets will not be trimmed. Flattened Profiles will be thinner than the original material thickness. SMALL ALUMINIUM RAISED 213A A A A A A SMALL ALUMINIUM FLATTENED 217AF The flattening process will increase the O/A size of expanded sheets. Unless specified, flattened sheets will not be trimmed. Flattened Profiles will be thinner than the original material thickness 8

10 SUNSCREENING RANGE Sun 401 Profile LWM 28mm 3.6mm LV Profile 14.3mm LWM 62mm L76 Profile 16mm LWM 76mm Sun 636 Profile 30mm LWM 75mm 9

11 SUNSCREENING RANGE SUNSCREEN STEEL Mesh Reference Nominal Sheet Sizes (mm) Nominal Size of Mesh (mm) Nominal Size Mesh Opening (mm) Approx. Strand Size (mm) LW SW LWM LWO SWO Width Thick *G Denotes Galvabond material. Some of the above profiles can be supplied in Hot Dipped Galv. Weight Kg/m 2 Overall Height (mm) % Open Area Raised Norm Max Sun LV10G Louvre LV16G Louvre L7609G Louvre L7616G Louvre Sun 636G Sun 16G SUNSCREEN ALUMINIUM Sun 401A A A LV10A Louvre LV16A Louvre L7609A Louvre L7616A Louvre Sun 636A Sun 20A Non standard sheet sizes available. Conditions apply. Sun 16 Profile 34mm LWM 120mm 10

12 SECURITY & FENCING MESH RANGE JE Profile 11mm LWM 19mm 12 Profile 12mm LWM 30mm HVO Profile 15mm LWM 38mm DMS & HDMS Profile 19mm LWM 50mm 11

0 DMS 30 1800 HDMS 30 1800 UP TO 5000 UP TO 5000 50 19 4 3 9.4 7.0 50 19 5 3 11.7 9.0 JE 1112 UP TO 19 11 3 3 13 6.0 1200 JE 1116 5500 19 11 4 3 17 5.5 3830 CY 2400 1800 76 38 4.

13 SECURITY & FENCING MESH RANGE Security & fencing Mesh Mesh Reference Nominal Sheet Sizes (mm) Nominal Size of Mesh (mm) Approx. Strand Size (mm) LW SW LWM Width Thick Weight Kg/m 2 Overall Height HV 030 UP TO HV DMS HDMS UP TO 5000 UP TO JE 1112 UP TO JE CY Security mesh available in Mild steel, Galvabond, Aluminium or Hot dipped Galv. Conditions apply. Custom sizes available. Conditions apply. USI 3830 Profile 38mm 3430 Profile 34mm LWM 76mm LWM 120mm 12

14 AGRICULTURAL MESH RANGE AG1930SP 19mm LWM 50mm AG mm LWM 60mm AG mm LWM 75mm 13

AGRICULTURAL MESH RANGE AGRICULTURAL MESH (AG) STEEL Mesh Reference Standard Sheet Sizes (mm) LW SW Nominal Size of Mesh (mm) Nominal Size of Mesh Opening (mm) Approx.

0 15 WK2515FMF 1200 2400 60 25 45 9 8 3 15.0 3 AG3012 1200 2400 75 30 59 19 8 3 13.5 12 AG3012F 1200 2400 75 30 55 7 8 3 13.

15 AGRICULTURAL MESH RANGE AGRICULTURAL MESH (AG) STEEL Mesh Reference Standard Sheet Sizes (mm) LW SW Nominal Size of Mesh (mm) Nominal Size of Mesh Opening (mm) Approx. Strand Size (mm) LWM LWO SWO Width Thick Weight Kg/m2 Overall Height (mm) 1930SP WK2511FM WK2515FM WK2515FMF AG AG3012F F Denotes Flattened Mesh Flattened Profiles will be thinner than the original material thickness Also available in hot dipped Galv. The flattening process will increase the O/A size of expanded sheets. Unless specified, flattened sheets will not be trimmed. *Manufactured to size. Conditions apply. AG2515F 25mm LWM 60mm AG3012F 30mm LWM 75mm 14

$Ìi` > \$ $/" Ê, > \$ V ià V

16 V iàê À Õ«Ê < Ê Ìi` > \ 7iLÃ Ìi\Ê /" Ê, > \ 7iLÃ Ìi\Ê /" Ê, v J V ià V >ÕÊÊ ÜÜÜ V ià V >ÕÊ nääêèîxê {Ç Ã> iãj V ià â V âêêêê ÜÜÜ V ià â V âê änääêónxênîç V iàê À Õ«ÊÀiÃiÀÛiÃÊÌ iêà } ÌÊÌ Ê > iêìiv V> ÊV > }iãêü Ì ÕÌÊ Ì Vi ÊÊ Ûi LiÀÊÓä È V iàê À Õ«Ê*ÌÞ Ê Ì` MELBOURNE SYDNEY BRISBANE TOWNSVILLE DARWIN ADELAIDE PERTH AUCKLAND HONG KONG JAKARTA BEIJING

Expanded Metal Technical Design Manual <ogxe[\[ D\kXc D\k\o V iàê À Õ«ÊÌÞ Ê Ì` V iàê À Õ«Ê < Ê Ìi` i\ * i\ >Ý\ >Ý\ > \ > \ 7iLÃ Ìi\Ê 7iLÃ Ìi\Ê

$Expanded Metal Technical Design Manual <ogxe[\[ D\kXc D\k\o V iàê À Õ«Ê*ÌÞ Ê Ì` V iàê À Õ«Ê < Ê Ìi` * i\ * i\ >Ý\ >Ý\ > \ > \ 7iLÃ Ìi\Ê 7iLÃ Ìi\Ê$