P e r f o r a t e d S t o c k P a t t e r n s

Size: px

Start display at page:

Download "P e r f o r a t e d S t o c k P a t t e r n s"

Rodney Henderson
6 years ago
Views:

2 Expanded, Perforated & Wire Products Locker Group is the market leader in expanded and perforated metal, woven and welded wire mesh. In business for over 50 years, Locker Group has built a wealth of experience through the merger of market leaders; Expamet, Richardson Pacific and Lockers, with manufacturing plants in Melbourne and Sydney, plus New Zealand and Asia. Due to our size and experience, Locker Group is able to offer not only the largest range of stock perforations, but also has the capability to customise to any requirement; material, thickness, hole size, patterns and so on. Talk to your Locker Group sales consultant about our custom made service. Front Cover: Webb Bridge, Docklands VIC. Designer: Robert Owen, Architects: Denton Corker Marshall Photograph: John Gollings This Page: Right/ Telstra Dome Roof, Docklands, VIC. Below/ Railway Estate Over Pass, Townsville, QLD.

3 Stock s The following tables outline the perforated sheets available ex-stock from Locker Group locations around Australia. Stock sheets are listed in hole configurations (round, square etc), then material types and thicknesses for each pattern. R00831 Dia 0.81 Pitch 1.40 Area 31% R03341 Dia 3.25 Pitch 4.78 Area 41% Locate the part you require using the patterns pictured on the immediate right (shown as actual size). Find the pattern in the tables on the far right, selecting the appropriate material, thickness and sheet size (where possible). Please note: R01636 Dia 1.60 Pitch 2.54 Area 36% R03230 Dia 3.25 Pitch 5.59 Area 30% R06440 Dia 6.35 Pitch 9.53 Area 40% > Stock sheets are available in a standard size (2440mm x 1220mm) unless identified. > All dimensions are in millimeters and are nominal. > End of sheets are cut through perforations (nil margins). > Borders are available through Locker Group s custom made perforation service. R01623 Dia 1.60 Pitch 3.20 Area 23% R03325 Dia 3.25 Pitch 6.10 Area 25% R07962 Dia 7.94 Pitch 9.55 Area 62% > Locker Group reserves the right to make technical changes without notice. Key to Table 63 Available in Std Sheet sizes Available in Std Sheet sizes and number specific R02040 Dia 2.00 Pitch 3.00 Area 40% R04046 Dia 3.97 Pitch 5.59 Area 46% 63 6 x 3 (1830mm x 915mm) only 64 6 x 4 (1830mm x 1220mm) only 73 7 x 3 (2135mm x 915mm) only 83 8 x 3 (2440mm x 915mm) only C3 915mm wide coil R02440 Dia 2.41 Pitch 3.66 Area 40% R04851 Dia 4.76 Pitch 6.35 Area 51% R08047 Dia 8.00 Pitch Area 47% C4 1220mm wide coil C5 1525mm wide coil * Multiple Sizes Available 6 x 4, 8 x 3, 8 x 5, 10 x 3, 10 x 4, 10 x 5, C4, C5 Aluminium stock is available in metric size sheets only, eg 1800mm x 900mm R02411 Dia 2.38 Pitch 6.74 Area 11% R04833 Dia 4.76 Pitch 7.92 Area 33% R03346 Dia 3.25 Pitch 4.52 Area 46% R06451 Dia 6.35 Pitch 8.5 Area 51% R09551 Dia 9.50 Pitch 12.7 Area 51%

4 R09540 Dia 9.50 Pitch Area 40% R12749 Dia 12.7 Pitch Area 49% R12740 Dia 12.7 Pitch Area 40% S04847 Dim 4.76 Pitch 6.99 Area 47% S06469 Dim 6.35 Pitch 7.62 Area 69% D05619 Dim 5.56 Pitch 12.7 Area 19% L19141 CODE F Dim Pitch 3.18 Area 41% S11149 Dim Pitch Area 49% L25443 CODE A Dim 25.4 Pitch 6.35 Area 43% S07948 Dim 7.94 Pitch Area 48% ROUND HOLES - ROUND HOLES - Zincalume (ZU) Area % R % 63 R % R % R % R % R % R % R % R % R % R % 63 R % R % R % R % R % R % R % R % R % R % R % R % R % ROUND HOLES - Galvanised (GB) R % R % R % R % * R % R % R % R % R % R % R % Area % R19151 Dia Pitch 25.4 Area 51% F10236 Dim (Club) Pitch 15.24S Area 36%

5 ROUND HOLES - Stainless Steel 316 (S6) R % ROUND HOLES - Stainless Steel 304 (S4) R % R % C3 R % R % 63 R % R % 63 R % R % 63 R % R % 63 R % 63 SLOTTED HOLES DIAMOND HOLES 3 X L19042 SLOT EB:3, 42% 83 code E SB:3 L19141 L x 3.18 EB:3.18, SB: x 6.35 EB:6.35, SB: code F Anodised Aluminium (AN) L x6.35 RES EB:6.35, SB: code A 43% code A Area % % 63 43% 64 Area % Aluminium (A5) D D % 83 D D 12.7S 19% ROUND HOLES - Aluminium (A5) CLUB & ROUND - FANCY R % 63 R % 83 R % R % R % R % ROUND HOLES - Zincanneal (ZA) R % R % ROUND HOLES - Zincseal (ZS) Area % C4 R % 64 R % R % R % F CLUB 15.24S 36% 83 Zincanneal (ZA) F CLUB 15.24S 36% 73 Zincseal (ZS) F CLUB 15.24S 36% 83 SQUARE HOLES Aluminium (A5) S S 11.43S 48% 83 S S % Galvanised (GB)t S S 75.0S 46% S S % 63 S S % 64 S S 11.43S 48% S S 16.67S 44% S S 15.88S 49% HEXAGONAL HOLES - H H % Area % Area % Area %

6 New Locker Group Perforated Part Numbers The Locker Group has introduced a new part numbering system to make it simple and easy to order perforated stock sheets. Each part number is made up of the pattern e.g. R02411 (denoting a round hole, with approx 2.4mm diameter and 11% open area), the material e.g. GB (Galvanised) and the thickness 06 (0.6mm). The standard sheet size is 2440mm x 1220mm. If the stock sheet is available in a non-standard sheet size, this is added on to the end of the part number, in feet e.g. 63 (6 x 3, 1830mm x 915mm). Part R Shape 024 Dimension [R][024][11][GB][06][63] 11 Area GB Material 06 Thickness 63 Sheet Size (if not Standard) in Feet Pitch Options Staggered 60 SQUARE PITCH SQUARE 45 D = dimension C = Centre Locker Group Pty. Ltd. 2 Cojo Place, Dandenong South, Victoria 3175 Australia. ABN Phone: Fax: info@locker.com.au Website: VICTORIA: Dandenong South P: (03) F: (03) NEW SOUTH WALES: Revesby P: (02) F: (02) QUEENSLAND: Darra P: (07) F: (07) NorTH Queensland: Garbutt P: (07) F: (07) SouTh Australia: Clovelly Park P: (08) F: (08) Western Australia: Welshpool P: (08) F: (08) NoRthern territory: Berrimah P: (08) F: (08) Distributed by: Expanded Perforated & Wire Products Polyurethane Screening A division of the Locker Group FEB 2006 VJ_LOC058 Melbourne Sydney Brisbane Townsville DARWIN Adelaide Perth Auckland Hong Kong Jakarta Singapore Shanghai

Expanded Metal Walkway

Expanded Metal Walkway Safe Flooring Solutions Expanded MetalMetal Walkway Expanded Technical Design Manual GRIDWALK WK 45 Profile 45mm LWM 135mm Photo shown 8% smaller than actual size 19 Large Mesh WK