Piling Product Guide Edition. Servicesteel.org

Transcription

1 Piling Product Guide 2017 Edition

2 Strong Foundations Starith Service Steel Service Steel Supplies All Your Foundation Products You Are Our Number One Priority From industry leading steel sheet piling to channel, angle, walings and struts utilizing wide flange beams and pipe, tie-rod anchor systems and piling points and shoes. Supported by a dynamic sales team and backed by unmatched engineering expertise, Service Steel is ideally positioned to service its foundation and structural customers nationwide. Service Steel is a full service company serving the foundation markeith a range of top quality products and services. We employ highly qualified people to give you quick and dependable supporoour questions and project needs. Our goal is to offeou a product package for all of your construction piling needs. We supply straighrom stock at our various locations and directly from mill production runs with fast delivery times to your site location. I hope you enjoy browsing through the catalogue, and please, reach out to me if you need anything. Besishes, Gerry McShane Products include: I Hot Rolled Steel Sheet Piles II Pipe III H-Piles / WF Shapes IV Tie-Rod Anchorages V Channels / Angles Services include: I Fabrication II Coating / Galvanizing III Sealants IV Design & Engineering V Technical Information Contact Service Steel Sheet Piling & Foundation Solutions Gerry McShane gmcshane@servicesteel.org customercare@servicesteel.org 2 Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 3

3 Table of Contents SERVICE STEEL SHEET PILING all in Grade 65 steel ESZ Larssen Interlock Service Steel Sheet Piling All in Grade 65 Steel... 5 Sheet Pile and Combined Pipe and Sheet Pile Steel Grades... 8 PESZ - Combined Pipe and Sheet Pile... 9 Spiral Weld Pipe Sheet Pile Width (w) in (mm) Height (h) in (mm) Flange ( ) in (mm) Thickness Web ( ) in (mm) Pile lb/ft (kg/m) Mass Wall lb/ft² (kg/m²) Elastic In³/ft (cm³/m) Moment of Inertia In 4 /ft (cm 4 /m) Cross al Area In²/ft (cm²/m) Coating Area Both Sides of Single ft²/ft (m²/m) Wall Surface ft²/ft² (m²/m²) Radius of Gyration In (cm) Spiral Weld Pipe - Steel Grades ESZ Tie Rod Anchorage Systems Wide Flange Beams Steel H-Pile ESZ 18 ESZ 19 ESZ 20 ESZ C-Channel ESZ MC-Channel ESZ 19- ESZ / ESZ ESZ ESZ ESZ Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 5

4 ESZ 18 6 Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 7

5 Sheet Pile and Combined Pipe and Sheet Pile Steel Grades PESZ - Combined Pipe and Sheet Pile Available Steel Grades - Sheet Piling American Canadian European ASTM Yield Strength CSA G40.21 Yield Strength EN 1034 Yield Strength ksi Mpa ksi Mpa ksi Mpa A 572 Grade Grade 350 W S 320 GP ~ 30 mm ~1.18" ~25 ~25 ~ 30 mm ~1.18" A 572 Grade Grade 400 W S 355 GP A 572 Grade S 390 GP A 572 Grade S 430 GP A 690* * Subject to mill inquiry PESZ - Combined Pipe and Sheet Pile - Grades Pipe EZ System Sheet Pile PESZ 24/ESZ 18 ESZ 18 Properties of Pipe Pile Outside Diameter in mm Wall Thickness Pipe Weight System Width System Inertia Properties of Combined Wall Weight 100% 80% 60% in lb/ft in in 4 /ft in 3 /ft lb/ft 2 lb/ft 2 lb/ft 2 mm kg/m mm cm 4 /m cm 3 /m kg/m 2 kg/m 2 kg/m Available Steel Grades - Pipe in Combined Walls American ASTM Yield Strength ASTM Yield Strength ksi Mpa ksi Mpa A 139 Gr A A 252 Gr A 139 Gr B A 252 Gr A 139 Gr C A 252 Gr A 139 Gr D A 252 Gr 3 m A 139 Gr E Available Steel Grades - Sheet Piling in Combined Walls American Canadian European ASTM Yield Strength CSA G40.21 Yield Strength EN 1034 Yield Strength ksi Mpa ksi Mpa ksi Mpa A 572 Grade Grade 350 W S 320 GP A 572 Grade Grade 400 W S 355 GP A 572 Grade S 390 GP A 572 Grade S 430 GP A 690* * Subject to mill inquiry PESZ 30/ESZ 18 ESZ 18 PESZ 36/ESZ 18 ESZ 18 PESZ 42/ESZ 18 ESZ 18 PESZ 48/ESZ 18 ESZ 18 PESZ 54/ESZ 18 ESZ 18 PESZ 60/ESZ 18 ESZ 18 PESZ 60/ESZ 18 ESZ 18 PESZ 66/ESZ 18 ESZ 18 PESZ 72/ESZ 18 ESZ Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 9

6 PESZ - Combined Pipe and Sheet Pile Spiral Weld Pipe ~ 30 mm ~1.18" ~ 30 mm ~1.18" D I D O ~25 ~25 t Pipe EZ System Sheet Pile PESZ 24/ESZ 26 ESZ 26 PESZ 30/ESZ 26 ESZ 26 PESZ 36/ESZ 26 ESZ 26 Properties of Pipe Pile Outside Diameter in mm Wall Thickness Pipe Weight System Width System Inertia Properties of Combined Wall Weight 100% 80% 60% in lb/ft in in 4 /ft in 3 /ft lb/ft 2 lb/ft 2 lb/ft 2 mm kg/m mm cm 4 /m cm 3 /m kg/m 2 kg/m 2 kg/m Outside Diameter in (mm) PIPE WEIGHT lbs/ft (kg/m) Wall Thickness (t) in (mm) PESZ 42/ESZ 26 ESZ PESZ 48/ESZ 26 ESZ 26 PESZ 54/ESZ 26 ESZ 26 PESZ 60/ESZ 26 ESZ PESZ 60/ESZ 26 ESZ PESZ 66/ESZ 26 ESZ PESZ 72/ESZ 26 ESZ The above are sample combinations. Contact us for multiple other configurations. 10 Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 11

7 Spiral Weld Pipe - Steel Grades Tie Rod Anchorage Systems PIPE WEIGHT lbs/ft (kg/m) Outside Diameter in (mm) Wall Thickness (t) in (mm) Grade 75 All-Thread Rebar 150 KSI All-Thread-Bar Please inquire about other sizes Diameter Approx. Thread Major & Threads per Inch Weight per Linear ft. (Meters) Minimum Yield Strength of Rebar Minimum Ultimate Strength of Rebar Nominal Bar Diameter Approx. Thread Major & Threads per Inch Weight per Linear ft. (Meters) Minimum Yield Strength of Bar Minimum Ultimate Strength of Bar Pipe Weight (lbs/6) = x t x (d- t) d (in) = outside diameter t (in) = thickness Pipe Weight (kg/m) = x t x (d- t) d (mm) = outside diameter t (mm) = thickness #8-1 (25 mm) #9-1-1/8 (29 mm) #10-1-1/4 #11-1-3/8 (35 mm) 1-1/8-3-1/2 (29 mm) 1-1/4-3-1/2 1-3/8-3 (35 mm) 1-1/2-3 (38 mm) 2.7 lbs (1.2 KG) 3.4 lbs (1.5 KG) 4.30 lbs (2.0 KG) 5.30 lbs (2.4 KG) 59.3 kips (264 kn) 75.0 kips (334 kn) 95.3 kips (424 kn) kips (520 kn) 79.0 kips (351 kn) kips (445 kn) kips (565 kn) kips (694 kn) 1 (25 mm) 1-1/4 1-3/8 (35 mm) 1-3/4 (44 mm) 1-1/8-4 (29 mm) 1-7/16-4 (37 mm) 1-9/16-4 (40 mm) 2-3-1/2 (51 mm) 3.09 lbs (4.6 Kg) 4.51 lbs (6.71 Kg) 5.71 lbs (8.50 Kg) 9.06 lbs (13.48 Kg) 102 kips (454 kn) 150 kips (667 kn) kips (843 kn) 312 kips (1388 kn) kips (567 kn) kips (834 kn) kips (1054 kn) 390 kips (1734 kn) Available Steel Grades American Canadian European ASTM Yield Strength CSA G40.21 Yield Strength EN Yield Strength ksi Mpa ksi Mpa ksi Mpa A 139 Gr A A 252 Gr A A 139 Gr B A 252 Gr A #14-1-3/4 (44 mm) #18 - #20 - # /8-3 (48 mm) 2-7/16-3 (62 mm) 2-3/4-2-3/4 (70 mm) 3-3/16 2-3/4 (81 mm) 7.65 lbs (3.5 KG) lbs (6.2 KG) lbs (7.6 KG) 24.0 lbs (35.8 KG) kips (750 kn) kips (1334 kn) kips (1637 kn) 511 kips (2273 kn) kips (1001 kn) kips (1779 kn) kips (2184 kn) 682 kips (3034 kn) - 3-1/2 2-3/4-3 (70 mm) 14.1 lbs (20.8 Kg) lbs (27.1 Kg) 490 kips (2181 kn) kips (2766 kn) 613 kips (2727 kn) kips (3461 kn) A 139 Gr C A 252 Gr A A 139 Gr D A 252 Gr 3 m #28-3-1/2 3-3/4-2-3/4 (95 mm) 32.7 lbs (14.8 KG) kips (3203 kn) kips (4270 kn) A 139 Gr E Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 13

8 Tie Rod Anchorage Systems Tie Rod Anchorage Systems OD Turnbuckles Sleeve Nuts Turnbuckles Sleeve Nuts Washers Hex Nuts Spherical Washers/Hex Nuts Overall Length Part Number Across Flats Overall Length Overall Length Part Number Across Flats Overall Length Hardened Washers Beveled Washers Degree of Bevel Across Flats Thickness Part Number Thickness Outside Dome Part Number Grade 75 All-Thread Rebar Grade 75 All-Thread Rebar 150 KSI All-Thread Bar 150 KSI All-Thread Bar #8-1 (25 mm) Grade 75 All-Thread Rebar R9F R8M-09S 15 #8-1 (25 mm) Grade 75 All-Thread Rebar 1-5/8 (41.3 mm) 2 (50.8 mm) R63-08 #8-1 (25 mm) Grade 75 All-Thread Rebar 5/8 (15.9 mm) R #8-1 (25 mm) #9-1-1/8 (28 mm) #10-1-1/4 12-5/8 (321 mm) 13-1/2 (343 mm) 14-3/8 (365 mm) #8-1 (25 mm) #9-1-1/8 (28 mm) #10-1-1/4 1-5/8 (41 mm) 1-7/8 (48 mm) 2-1/8 (54 mm) 7-1/2 (191 mm) 8-1/2 (216 mm) 9-1/4 (235 mm) 1 (26 mm) 1-1/4 1-3/8 (36 mm) 14-3/8 (365 mm) 16-5/8 (422 mm) 16-7/8 (429 mm) (26 mm) 1-1/4 1-3/8 (36 mm) 2 (51 mm) (65 mm) 2-3/4 (70 mm) 6-1/2 (159 mm) 8 (203 mm) 9-1/2 (241 mm) #9-1-1/8 (28 mm) #10-1-1/4 #11-1-3/8 (35 mm) #14-1-3/4 R9F R8M-09S 15 R9F R8M-12S 15 R9F R8M-13S 10 R9F R8M-16 5 #9-1-1/8 (28 mm) #10-1-1/4 #11-1-3/8 (35 mm) #14-1-3/4 1-7/8 (47.8 mm) 2 (50.8 mm) (57.2 mm) 2-3/4 (73.0 mm) 2 (51 mm) 2-3/16 (55.6 mm) 2-13/32 (61.1 mm) 3-1/4 (82.6 mm) R63-09 R63-10 R63-11 R63-14 #9-1-1/8 (28 mm) #10-1-1/4 #11-1-3/8 (35 mm) #14-1-3/4 3/4 (19.1 mm) 53/64 (21.0 mm) 29/32 (23.0 mm) 1-7/64 (28.2 mm) 2-3/4 (70 mm) 3 3-1/4 (83 mm) 3-3/4 (95 mm) R R R R #11-1-3/8 (35 mm) #14-1-3/4 14-3/4 (375 mm) 16-7/8 (429 mm) #11-1-3/8 (35 mm) #14-1-3/4 2-3/8 (60 mm) 3 10 (254 mm) 1 (318 mm) 1-3/4 2 (572 mm) / (330 mm) #18 - (55 mm) #20 - #24-3 R9F R8M R9F R8M R9F R8M #18 - (55 mm) #20 - #24-3 * 3-1/2 (88.9 mm) 4 (102 mm) 4-1/2 (114 mm) 3-1/2 (88.9 mm) 4 (102 mm) 5 (127 mm) R63-18 R63-20 R64-24* #18 - (55 mm) #20 - # /32 (35.7 mm) 1-1/2 (38.1 mm) 1-7/8 (48 mm) 5 (127 mm) 5-1/4 (133 mm) 6-1/2 (165 mm) R R R #18 - (55 mm) #20-2 (572 mm) #18 - (55 mm) #20-3-1/2 4 (102 mm) 14--1/2 (368 mm) 16-1/2 (419 mm) (65 mm) 3 (75 mm) (65 mm) 3 (75 mm) 4 (102 mm) 16-1/2 (419 mm) #28-3-1/2 R9F R8M Two Bevel Washers are required for angle adjustment #28-3-1/2 * * Rounded Collar Nut 5-1/2 (140 mm) 6 (142 mm) R64-28* #28-3-1/2 1-1/2 (38.1 mm) 7 (178 mm) R #24-3 # /2 (114 mm) 16 (486 mm) #28-3-1/2 #28-3-1/2 5-1/2 (140 mm) 18 (457 mm) Other accessory data on request. 14 Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 15

9 Tie Rod Anchorage Systems Tie Rod Anchorage Systems ESZ 26 Sheet Pile (ASTM A572 Gr50) Washers Hardened Washers Beveled Washers Degree of Bevel Hex Nuts Across Flats Thickness Part Number Spherical Washers/Hex Nuts Thickness Outside Dome Part Number 1 1/4" R72 Coupling 2 x MC10 x 28.5 Channel Wale (ASTM A572 Gr50) 150 KSI All-Thread Bar 150 KSI All-Thread Bar 150 KSI All-Thread Bar 1 (26 mm) R9F R8M (26 mm) 1-3/4 2 (51 mm) R * (26 mm) (63.5 mm) R88-08* 1-1/4 R9F R8M /4 R /4 * 2-3/4 (70 mm) 3-1/8 (7 mm) R88-10* 1-3/8 (36 mm) 1-3/4 R9F R8M R9F R8M /8 (36 mm) 1-3/4 (63.5 mm) 3 2-3/4 (70 mm) 3-1/2 R73-11 R /8 * (36 mm) 1-3/4 * 3-1/4 (82.5 mm) 3-1/2 3-5/8 (90.2 mm) 4 (102 mm) R88-11* R88-14* 1 1/4" All Threaded Bar (ASTM A722 Gr 150 KSI) R9F R8M /2 4-1/4 (105 mm) R /4 (146 mm) 5-1/2 (140 mm) R73-18 R81-18 (65 mm) R9F R8M (65 mm) 4-1/4 (108 mm) 4-3/4 (120 mm) R73-20 (65 mm) 6-1/2 (165 mm) 6 (152 mm) R73-20 R (75 mm) R9F R8M * (75 mm) 4-1/4 (108 mm) 6-1/8 (156 mm) R74-24* 3 (75 mm) 8-1/8 (206 mm) 7 (178 mm) R74-24 R81-24 Two Bevel Washers are required for angle adjustment * Rounded Collar Nut * Spherical Hex Nut 16 Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 17

10 Tie Rod Anchorage Systems Tie Rod Anchorage Systems 18 Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 19

11 Wide Flange Beams Wide Flange Beams SECTION SIZE AREA DEPTH FLANGE THICKNESS DISTANCE ELASTIC PROPERTIES Plastic SECTION SIZE AREA DEPTH FLANGE THICKNESS DISTANCE ELASTIC PROPERTIES Plastic W40 x 16 W40 x W40 x W40 x W40 x W40 x W40 x W40 x W40 x W40 x W40 x W40 x 12 W40 x W40 x W40 x W40 x W40 x W40 x W40 x W40 x W40 x x 16-1/2 W36 x W36 x W36 x W36 x W36 x W36 x W36 x W36 x W36 x W36 x W36 x x 12 W36 x W36 x W36 x W36 x W36 x W36 x W36 x W36 x W36 x x 15-3/4 W33 x W33 x W33 x W33 x W33 x W33 x W33 x W33 x x 11-1/2 W33 x W33 x W33 x W33 x Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 21

12 Wide Flange Beams Wide Flange Beams SECTION SIZE AREA DEPTH FLANGE THICKNESS DISTANCE ELASTIC PROPERTIES Plastic SECTION SIZE AREA DEPTH FLANGE THICKNESS DISTANCE ELASTIC PROPERTIES Plastic W33 x x 15 W30 x W30 x W30 x W30 x W30 x W30 x W30 x W30 x W30 x x 10-1/2 W30 x W30 x W30 x W30 x W30 x W30 x W30 x x 14 W27 x W27 x W27 x W27 x W27 x W27 x W27 x W27 x W27 x W27 x W27 x x 10 W27 x W27 x W27 x W27 x W27 x x 12-3/4 W24 x W24 x W24 x W24 x W24 x W24 x W24 x W24 x W24 x W24 x W24 x W24 x W24 x W24 x x 9 W24 x W24 x W24 x W24 x W24 x CSA W24 x CSA W24 x x 7 W24 x W24 x x 13 W21 x W21 x x 12-1/4 W21 x W21 x W21 x W21 x W21 x W21 x Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 23

13 Wide Flange Beams Wide Flange Beams SECTION SIZE AREA DEPTH FLANGE THICKNESS DISTANCE ELASTIC PROPERTIES Plastic SECTION SIZE AREA DEPTH FLANGE THICKNESS DISTANCE ELASTIC PROPERTIES Plastic W21 x W21 x W21 x x 8-1/4 W21 x W21 x W21 x W21 x W21 x W21 x W21 x x 6-1/2 W21 x W21 x W21 x x 11 W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x W18 x x 7-1/2 W18 x W18 x W18 x W18 x W18 x CSA W18 x CSA W18 x x 6 W18 x W18 x W18 x x 10-1/4 W16 x W16 x W16 x W16 x x 7 W16 x W16 x W16 x W16 x W16 x x 5-1/2 W16 x W16 x x 16 W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x W14 x Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 25

14 Wide Flange Beams Wide Flange Beams SECTION SIZE AREA DEPTH FLANGE THICKNESS DISTANCE ELASTIC PROPERTIES Plastic SECTION SIZE AREA DEPTH FLANGE THICKNESS DISTANCE ELASTIC PROPERTIES Plastic W14 x W14 x W14 x W14 x x 14-1/2 W14 x W14 x W14 x W14 x W14 x x 10 W14 x W14 x W14 x W14 x x 8 W14 x W14 x W14 x x 6-3/4 W14 x W14 x W14 x x 5 W14 x W14 x x 12 W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x W12 x x 10 W12 x W12 x x 8 W14 x W14 x W14 x x 6-1/2 W14 x W14 x W14 x x 4 W14 x W14 x W14 x Wide Flange Available Steel Grades American Canadian European ASTM Yield Strength CSA G40.21 Yield Strength EN Yield Strength ksi Mpa ksi Mpa ksi Mpa A Gr 350 W S A 572 Gr S A S A Histar A A Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 27

15 Steel H-Pile C-Channel Flange Thickness Coating Elastic Properties Weight Area Depth Width Flange Web Area Axis X -X Axis Y - Y d I S r I S r lb/ft in 2 in in in in ft 2 /ft in 4 in 3 in in 4 in 3 in HP HP HP HP Size Area Depth Flange Thickness Distance Elastic Properties Plastic 15 x 3-3/8 C15 x C15 x C15 x x 3 C12 x C12 x C12 x Available Steel Grades American Canadian European ASTM Yield Strength CSA G40.21 Yield Strength EN Yield Strength ksi Mpa ksi Mpa ksi Mpa A Gr 300 W Histar A572 Gr Gr 350 W Histar A Histar A Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 29

16 MC-Channel Strong Foundations Starith Service Steel Size Area Depth Flange Thickness Distance Elastic Properties Plastic 18 x 4 MC18 x MC18 x MC18 x MC18 x x 4 MC13 x MC13 x MC13 x MC13 x x 4 MC12 x MC12 x MC12 x MC12 x MC12 x Products and services available from Service Steel Standard I-Beams Wide Flange Beams Channels Bar Channels Junior Channels Split Tees Rounds Squares Flats UM Plate Rebar Angles Coils Mill Plate Floor Plate Sheet Strip Square Rectangle Pipe Round Piling up to 20 ASTM A252 Grade 3 Channel Available Steel Grades American Canadian European ASTM Yield Strength CSA G40.21 Yield Strength EN Yield Strength ksi Mpa ksi Mpa ksi Mpa Bar Grating Expanded Metal Grating A Gr 350 W S A 572 Gr S A A Using only the most modern, state-of-the-art equipment, Service Steel Warehouse and its partners provide a full range of value-added services, including: Bending Cutting to Length Sawing (Straight, Mitre) Shape Cutting or Burning Shearing Tee Splitting Rolling and Cambering Heat Treating Charpy V-Notch Impact Testing 30 Sales / Engineering: Gerry McShane gmcshane@servicesteel.org 31

17 Strong Foundations Starith Service Steel From industry leading steel sheet piling, to channel, angle, walings and struts utilizing wide flange beams, to pipe, tie-rod anchor systems, piling points and shoes, we have it. Sheet piles are stocked in TX, KS, IN, CA, FL, NJ, PA and CT All in one place neaou. Sales / Engineering: Gerry McShane gmcshane@servicesteel.org