Elma Steel & Equipment Ltd.
|
|
|
- Barbara Miles
- 5 years ago
- Views:
Transcription
1 Elma Steel & Equipment Ltd. THE GREAT STEEL PLACE REFERENCE BOOK
2 Forward This handbook is published for Elma Steel & Equipment Ltd. and is distributed as a service to metal users. Elma Steel & Equipment Ltd. assumes no responsibility for and makes no representations or warranties as to the applicability or suitability of the information in this book for any specific application. Any use of this material in relation to any specific application should be based on independent eamination and verification of its unrestricted availability for such use and a determination of suitability for the application by professionally qualified personnel. Those making use of or relying upon the material contained herein assume all risks and liability arising from such use or reliance.
3
4 INDEX Page # Foreword...1 Stainless... 5 Aluminum Epanded Metals and Grating Carbon Steel Bars - Hot Rolled Cold Rolled Angles Channels Beams Sheets Hot Rolled Steel Plates Hollow Structural Tubing Rebar and Mesh Miscellaneous
5 This section contains ROUNDS SQUARES FLATS ANGLES CHANNELS TUBING PIPE SHEET AND PLATE
6 UStainless Steel Round 303: ASTM A581, ASTM A582,AMS : ASTM A276, ASTM A479, ASME SA : ASTM A276, ASTM A479, ASTM A580 AMS 5653 Size lbs/ft 303 1/16 3/32 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/ /8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/ /8 2 3/16 2 1/4 2 5/16 2 3/8 2 7/ C -5-
7 UStainless Steel Round Size 2 1/2 2 9/16 2 5/8 2 11/16 2 3/4 2 7/8 2 15/ /8 3 1/4 3 3/8 3 1/2 3 5/8 3 3/4 3 7/ /8 4 1/4 4 3/4 4 1/2 4 5/8 4 3/4 4 7/ /4 5 1/2 5 3/ /4 6 1/2 6 3/ /4 7 1/2 7 3/4 8 lbs/ft C -6-
8 UStainless Steel Square 303: ASTM A581, ASTM A582,AMS : ASTM A276, ASTM A479, ASME SA479 Size in Inches Appro.lbs/ft 303 1/ / / / / / / / / / / / / / / / / / / / / / / / /
9 UStainless Steel Flat Bar 304/316: ASTM A276, ASTM A479, ASME SA479 Size in Inches Appro.lbs/ft /8 1/ /8 3/8 1/8 1/2 1/8 3/ /8 1 1/8 1 1/4 1/8 1 1/2 1/8 1 3/4 1/8 2 1/8 2 1/ /8 3 1/8 4 3/16 3/ /16 1/2 3/16 3/4 3/16 1 3/16 1 1/4 3/16 1 1/ /16 1 3/4 3/ /16 2 1/4 3/16 2 1/ /16 2 3/ /16 4 3/16 6 3/ /4 1/2 1/4 3/4 1/4 1 1/4 1 1/4 1/4 1 1/2 1/4 1 3/4 1/4 2 1/4 2 1/4 1/4 2 1/2 1/4 2 3/4 1/4 3 1/4 3 1/2 1/4 4 1/4 4 1/ /4 5 1/
10 U UStainless Steel Flat Bar USize in Inches 1/4 8 5/16 3/8 5/16 1/2 5/16 3/4 5/16 1 5/16 1 1/4 5/16 1 1/2 5/16 1 3/4 5/16 2 5/16 2 1/2 5/16 3 5/16 4 5/16 5 5/16 6 3/8 3/4 3/8 1 3/8 1 1/4 3/8 1 1/2 3/8 1 3/4 3/8 2 3/8 2 1/2 3/8 3 3/8 3 1/2 3/8 4 3/8 5 3/8 6 3/8 8 1/2 3/4 1/2 1 1/2 1 1/4 1/2 1 1/2 1/2 1 3/4 1/2 2 1/2 2 1/2 1/2 3 1/2 3 1/2 1/2 4 1/2 5 1/2 6 1/2 8 5/8 1 5/8 1 1/4 5/8 1 1/2 5/8 2 UAppro.lbs/ft U304U
11 UStainless Steel Flat Bar USize in Inches 5/8 2 1/2 5/8 3 5/8 3 1/2 5/8 4 5/8 5 5/8 6 3/4 1 3/4 1 1/4 3/4 1 1/2 3/4 1 3/4 3/4 2 3/4 2 1/4 3/4 2 1/2 3/4 2 3/4 3/4 3 3/4 3 1/2 3/4 4 3/4 5 3/4 6 3/ / / / / / / /4 1 1/2 11/4 2 11/4 2 1/2 11/4 3 11/4 3 1/2 11/4 4 11/4 5 11/4 6 11/2 2 11/2 2 1/2 11/2 3 11/2 3 UAppro.lbs/ft U304U U316U -10-
12 U UStainless Steel Flat Bar USize in Inches 1 1/ / / / / / / / / / / / UAppro.lbs/ft U304U 316U -11-
13 UStainless Steel Angle 304/316: ASTM A276, ASTM A479, ASME SA479 Size in Inches Appro.lbs/ft /4 3/4 1/ / / /4 1 1/4 1 1/4 1/8 1 1/4 1 1/4 3/16 1 1/4 1 1/4 1/4 1 1/2 1 1/2 1/8 1 1/2 1 1/2 3/16 1 1/2 1 1/2 1/ / / / /8 2 1/2 2 1/2 3/16 2 1/2 2 1/2 1/4 2 1/2 2 1/2 3/ / / / /2 3 1/2 1/ / / / Stainless Steel Channel 304: ASTM A276, ASTM A479, ASME SA479 Size in Inches Appro.lbs/ft 2 1 1/ /8 3/ /2 1/ /4 1/ /8 3/
14 UStainless Steel Tubing - Square 304: ASTM A-544 O.D. in Inches Wall Decimal lbs/ft /4 1 1/ /2 1 1/ /2 2 1/
15 U304 Stainless Steel Pipe Schedule 40 Nominal Appro.lbs/ft O.D. in Inches Wall 1/ / / / / / / / / Schedule 80 1/ / / / / / / / /
16 Stainless Steel Sheet Finishes 2B, #3, #4 Type 304: ASTM A240, ASME SA240 Type 316: ASTM A240, ASME SA240 Gauge Decimal lbs/sqft Sheet Size / /120/ / / / / /120/ / /120/ /120/ / /120/ /120/ / /120/ / / /120/ /120/ /120/ /120/ /120/ /120/ /120/ /120/ /120/ /120/ /120/ /120/ /120/
17 UStainless Steel Plate Grades: 304, 304L, 316, 316L Hot Rolled, Annealed & Pickled ASTM A240, ASME SA240, QQS 766 Thickness in Inches WidthinInches lbs/sqft 3/ / / / / / / / / / / / / /
18 This section contains ROUNDS SQUARES FLATS HEX ANGLES BEAMS TUBING PIPE SHEET AND PLATE
19 UAluminum Rounds 2011 T3 Cold Finished (QQA 225/3,ASTM B211) 2017 T4, T451 Cold Finished (QQA 225/5, AMS 4118) 2024 T4, T351 Cold Finished (QQA 225/6, AMS 4120) 6061 T6, T651 Cold Finished (QQA 225/8, AMS 4117) 6061 T6511 Etruded (QQA 200/8, AMS 4173) 7075 T6, T651 Cold Finished (QQA 225/9, AMS 4123) Diameter Weight in Pounds Size in Inches Per Foot 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Bar -17-
20 UAluminum Rounds 2 3/ / / / / / / / / / / / / / / / / / / / / Call for full bars or cut to size requirements! -18-
21 Aluminum Squares 2024 T351, T4 Cold Finished (QQA 225/6,AMS 4120) 6061 T6511 Etruded (QQA 200/8, AMS 4173) 6063 T52 Etruded (QQA 200/9, ASTM B221) Size of Square Weight in Pounds in Inches Per Foot 12 Bar 1/ / / / / / / / / / / / / / / / / / /
22 UAluminum Flat Bar 2024 T351, T4 Cold Finished (QQA 225/6,AMS 4120) 6061 T6511 Etruded (QQA 200/8, AMS 4173) 6063 T52 Etruded (QQA 200/9, ASTM B221) Size in inches lbs/ft /8 1/2 5/8 3/ /4 1 1/2 1 3/ / / /16 1/2 3/ /4 1 1/2 1 3/ / / /4 1/ / / / / / / / / /
23 UAluminum Flat Bar Size in inches lbs/ft /4 3 1/ / /16 1/2 3/ /4 1 1/ /8 1/2 3/ /4 1 1/2 1 3/ / / / /2 5/8 3/ /4 1 1/2 1 3/ /4 2 1/2 2 3/
24 UAluminum Flat Bar Size in inches lbs/ft / / / /4 1 1/2 1 3/ / / /4 1 1/2 1 3/ /4 2 1/2 2 3/ / / / /4 1 1/2 1 3/
25 UAluminum Flat Bar Size in inches lbs/ft /4 2 1/2 2 3/ / /4 1 1/ / / / / / / /
26 Aluminum Flat Bar Size in inches lbs/ft / /
27 UAluminum Heagons Size in inches lbs/ft 2011 T 2017 T451 3/16 1/4 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/ T /16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 1/2 1 5/8 1 3/4 1 7/ /4 2 1/2 2 3/
28 UAluminum Angle 6061 T6 Etruded, structural (QQA 200/16,AMS 4113) 6061 T6 Etruded, round corner (QQA 200/8, AMS 4150) 6063 T52 Etruded, sharp corners (QQA 200/9, ASTM B221) 6063 is in 16 foot lengths Size (in inches) lbs/ft 20 Bar 1/2 1/2 1/ /2 1/2 1/ /8 5/8 1/ /4 3/4 1/ /4 3/4 1/ /2 1/ /4 1/ / / / / /4 1 1/4 1/ /4 1 1/4 3/ /4 1 1/4 1/ /2 1 1/4 1/ /2 1 1/4 3/ /2 1 1/4 1/ /2 1 1/2 1/ /2 1 1/2 3/ /2 1 1/2 1/ /4 1 3/4 1/ /4 1 3/4 3/ /4 1 3/4 1/ /2 1/ /2 3/ /2 1/ / / / / / /2 1 1/2 3/ /2 1 1/2 1/ /2 2 3/ /2 2 1/ /2 2 1/2 1/
29 Aluminum Angle Size (in inches) lbs/ft 20 Bar 2 1/2 2 1/2 3/ /2 2 1/2 1/ /2 2 1/2 3/ / / /2 1/ / / / / / / /2 2 1/2 1/ /2 3 1/2 1/ /2 3 1/2 5/ /2 3 1/2 3/ /2 3 1/2 1/ / / / / / / / / / / / / / / / / / /
30 UAluminum Channel 6061 T6 (QQA 200/16,ASTM B308,AMS 4113) Size (in inches) lbs/ft 20 Bar
31 UAluminum Channel 6063 T52 Channel (QQA 200/9,ASTM B221) Size (in inches) lbs/ft 16 Bar 1/2 3/8 1/ /2 1/2 3/ /2 3/4 1/ /8 5/8 1/ /4 3/8 1/ /4 5/8 1/ /4 3/4 1/ /2 1/ / /4 1/2 1/ /4 3/4 1/ /4 1 1/4 1/ /2 1/2 1/ /2 3/4 1/ /4 1/2 1/ /4 3/4 1/ /4 1 1/ /2 1/ / / / / /4 7/8 1/ /8 1 1/4 3/ /2 1 1/2 1/ /2 1/ / / Aluminum Tee Bar 6061 T6 - QQA 200/16-25 lengths 6063 T52 - QQA 200/9-25 lengths Size (in inches) lbs/ft 6061T6 3/4 3/4 1/ /8 1 1/4 7/8 1/8 1 1/2 1 1/2 1/4 2 3/4 1/ / / T52-29-
32 UAluminum I-Beam 6061 T6 (QQA 200/16, ASTM B308, AMS 4113) Size in inches lbs/ft Size in inches lbs/ft Aluminum H-Beam & Wide Flange 6061 T6 (QQA 200/8, ASTM B221, AMS 4150) Size in inches lbs/ft
33 UAluminum Etruded Round Tube 6061 T6511 (QQA 200/8, ASTM B221) Size of O.D. Wall Thickness Appro.lbs/ft / / / / / / / / /
34 Aluminum Etruded Round Tube Size in Inches Wall Thickness Appro.lbs/ft 2 3/ / /
35 Aluminum Etruded Round Tube Size of O.D. Wall Thickness Appro.lbs/ft 5 1/ / / Other Sizes Available On Request! Supplied in Full Lengths or Cut to Your Size. -33-
36 Etruded Square Aluminum Tubing U6061 T6511 (QQA 200/8, ASTM B221) 6063 T53 (QQA 200/9,ASTM B221) Size in Inches Wall Thickness Appro.lbs/ft 3/4 3/ /4 1 1/ /2 1 1/ /8 1 5/ /4 1 3/ /4 2 1/4 2 1/2 2 1/ /2 3 1/
37 Etruded Square Aluminum Tubing Size in Inches Wall Thickness Appro.lbs/ft Aluminum Rectangular Tubing 6063 T52 (QQA 200/9) Size in Inches lbs/ft. 1 1/2 1/ /2 3/4 1/ /2 1 1/ / /2 1/ /2 1 1/4 1/ /2 1 1/2 1/ /2 3/ / /2 1 3/4 1/ /4 1/ c 1/ /2 1 3/4 1/ /4 1/ / / / /
38 UAluminum Pipe 6061 T6 (QQA 200/8, ASTM B241) 6063 T6 (QQA 200/9, ASTM B241) Nom. Size Size Size Schedule Wall lbs/ft O.D. I.D. 6063T6 1/ / / / / / / / Note: shows these sizes also available as 6063 T6-36-
39 UNon-Heat Treatable Sheet & Plate U3003 H14 (QQA 250/2,AMS 4008) Size in inches lbs/ft Size in inches lbs/sqft Note: some sizes are also available in O temper. -37-
40 Non-Heat Treatable Sheet & Plate U6061 T651/T6 (QQA 250/11,AMS 4027) Size in inches lbs/sqft Size in inches lbs/sqft Sizes Up To 12 Thick Available On Request -38-
41 U5086 H34 Diamond Tread Plate (ASTM B209) Size in inches lbs/sqft Size in inches lbs/sqft T6 Diamond Tread Plate (ASTM B632) Size in inches lbs/sqft Size in inches lbs/sqft Tread Bright Size in inches lbs/sqft Size in inches lbs/sqft
42 AND GRATING This section contains EXPANDED METAL GRATING
43 UStandard Epanded Metal Style No. Weight Standard Size of per Sheet Opening 100 Sq. Ft. Size in Inches 3/ /4-20 1/4-18 1/2-18 1/2-16 1/2-13 1/2-13 (188) 3/4-16 3/4-13 3/4-10 (13ga) 3/4-9 (10ga) H 1-1/ / / /2-10 (13ga) 1-1/2-9 (10ga.) 1-1/ /2-10H
44 UFlattened Epanded Metal Style No. Weight Standard Size of per Sheet Opening 100 Sq. Ft. Size in Inches 3/16-20F /4-18F /2-16F /2-13F /2-13F (188) /4-16F /4-13F /4-10F (13ga) /4-9F (10ga) F F F F /2-16F /2-14F /2-13F /2-12F /2-9F (10ga) /2-10F Call us for Galvanized, Aluminum and Stainless Steel Epanded Metal -42-
45 Epanded Metal Grating - Structural Style No. Weight Standard Size of per Sheet Opening 100 Sq. Ft. Size in Inches 3# # 3.14 ** # 4.00 ** # 4.27 ** # 5.00 ** # 6.25 ** # Welded Bar Grating Bearing Bar Weight per Bearing Bar Weight per Bearing Bar Weight per Size Sq. Ft. Size Sq. Ft. Size Sq.Ft. 3/4 1/ /4 3/ / / / /4 1/ /4 3/ /4 1/ /2 1/ /2 3/ /2 1/ /4 3/ /4 1/ / / /4 3/ /4 1/ /2 3/ /2 1/ Bar Grating is Available in Bare Metal, Black Primer or Galvanized Finishes. Can be ordered with Serrated Surface for Increased Safety. -43-
46 UDiamond Grip Part Number DG2154 DG2152 DG2204 DG2202 DG2254 DG2252 DG3154 DG3152 DG3204 DG3202 DG3254 DG3252 DG3302 DG4154 DG4152 DG4204 DG4202 DG4254 DG4252 DG4302 DG5154 DG5152 DG5204 DG5202 DG5254 DG5252 DG5302 DG8154 DG8152 DG8204 DG8202 DG8254 DG8252 DG8302 DG10152 DG10204 DG10202 DG10302 DG10504W DG10502W Weight per Lin.Foot Size in Inches 4-3/4 1-1/2 14ga. 4-3/4 1-1/2 12ga. 4-3/4 2 14ga. 4-3/4 2 12ga. 4-3/4 2-1/2 14ga. 4-3/4 2-1/2 12ga /2 14ga /2 12ga ga ga /2 14ga /2 12ga ga. 9-1/2 1-1/2 14ga. 9-1/2 1-1/2 12ga. 9-1/2 2 14ga. 9-1/2 2 12ga. 9-1/2 2-1/2 14ga. 9-1/2 2-1/2 12ga. 9-1/2 3 12ga. 11-3/4 1-1/2 14ga. 11-3/4 1-1/2 12ga. 11-3/4 2 14ga. 11-3/4 2 12ga. 11-3/4 2-1/2 14ga. 11-3/4 2-1/2 12ga. 11-3/4 3 12ga. 18-3/4 1-1/2 14ga. 18-3/4 1-1/2 12ga. 18-3/4 2 14ga. 18-3/4 2 12ga. 18-3/4 2-1/2 14ga. 18-3/4 2-1/2 12ga. 18-3/4 3 12ga /2 12ga ga ga ga ga. Walkway ga. Walkway Diamond Grip Available In Stainless & Aluminum Call Us For Sizes And Availability. Also On Hand Bolt Seats and Clip assemblies. Stock Length is 12 - Cut to Length available. -44-
47 USafety Grip Part Number SG2153 SG2203 SG3153 SG3151 SG3203 SG3201 SG3301 SG5153 SG5151 SG5203 SG5201 SG5301 SG6153 SG6151 SG6203 SG6201 SG6301 SG10153 SG10151 SG10203 SG10201 SG10301 SG13201 SG13301 SG13503W SG13501W SG16501W SG20501W Weight per Lin.Foot Size in Inches /2 13ga ga /2 13ga /2 11ga ga ga ga /2 13ga /2 11ga ga ga ga /2 13ga /2 11ga ga ga ga /2 13ga /2 11ga ga ga ga ga ga ga. Walkway ga. Walkway ga. Walkway ga.Walkway Call For Stainless & Aluminum -45-
48 USafety-Tread Ladder Rungs Part Weight per Size in Inches Number Lin.Foot (Width Depth Gauge) 2 HOLE* LR1251B /4 1-7/16 11 ga. (HR) 3 HOLE LR6253B /8 1-1/8 13 ga. (HR) LR6254S /8 1-1/8 14 ga. (Stainless) LR6258A /8 1-1/8.125 (Alum.) 4 HOLE LR2253B /4 1-1/2 13 ga. (HR) LR2254S /4 1-1/2 14 ga. (Stainless) LR2258A /4 1-1/2.125 (Alum.) * Note: 2 Hole Stainless & Aluminum available on request. Stock Length is 5. Safety Tread Flooring* Part Gauge & Weight per Number Material Sq. Ft. ST3101B ST3103B ST3106B ST3103G ST3104S ST3108A 11Ga. P & O Ga. P & O Ga. P & O Ga. Galvanized Ga. Stainless Aluminum 1.60 *Note: Standard Size is 3 10 Call us for Safety Tread Channel, Stair Treads and Walkway. -46-
49 This section contains HOT ROLLED BARS COLD ROLLED BARS
50 UHot Rolled Rounds Diameter Weight in Pounds Size in Inches Per Foot 20 Bar 3/ / / / / / / / / / / / / / / / / / / / / / / / /
51 UHot Rolled Rounds Diameter Weight in Pounds Size in Inches Per Foot 20 Bar / / / / / / / / / / / / / / /
52 UHot Rolled Squares Diameter Weight in Pounds Size in Inches Per Foot 20 Bar 1/ / / / / / / / / / / / / / / / / /
53 UHot Rolled Flats Diameter Size in Inches 1/8 1/2 3/ /4 1-1/2 1-3/ /4 2-1/2 2-3/ / / /2 6 Weight in Pounds Per Foot 20 Bar /16 1/ / / / / / / /
54 UHot Rolled Flats Diameter Weight in Pounds Size in Inches Per Foot 20 Bar 3/ / /4 1/2 3/ /4 1-1/2 1-3/ /4 2-1/2 2-3/ / / /16 3/
55 UHot Rolled Flats Diameter Size in Inches 5/16 1-1/4 1-1/2 1-3/ / / Weight in Pounds Per Foot 20 Bar /8 3/ / / / /4 2-1/2 2-3/ / /
56 UHot Rolled Flats Diameter UWeight in Pounds Size in Inches Per Foot 20 Bar 3/ /2 3/ / / / /4 2-1/2 2-3/ / / / / / / / /
57 UHot Rolled Flats Diameter Size in Inches 5/8 3-1/ / Weight in Pounds Per Foot 20 Bar / / / / / / / / / / /
58 UHot Rolled Flats Diameter Weight in Pounds Size in Inches Per Foot 20 Bar / / /4 1-1/ / / / / / /
59 UHot Rolled Flats Diameter Weight in Pounds Size in Inches Per Foot 20 Bar 1-3/ / / / / / /
60 UCold Finished Rounds C1018 C1045 C12L14/5 Diameter Weight in Pounds Size in Inches Per Foot 12 Bar 3/ / / / / Bar 1/ / / / / / / / / / / / / / / / / / / / / / / / /
61 UCold Finished Rounds C1018 C1045 C12L14/5 Diameter Weight in Pounds Size in Inches Per Foot 22 Bar 2-3/ / / / / / / / / / / / / / / / / / / / / / / / / / /
62 UCold Finished Rounds C1018 C1045 C12L14/5 Diameter Weight in Pounds Size in Inches Per Foot 22 Bar / / / / / / / / /
63 UCold Finished Squares Weight in Pounds Size in Inches Per Foot 12 Bar 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
64 UCold Finished Squares Weight in Pounds Size in Inches Per Foot 12 Bar / / / / / Call us for full lengths or consider ordering cut to size. -61-
65 UCold Finished Heagons Weight in Pounds Size in Inches Per Foot 12 Bar 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / /
66 UCold Finished Heagon Weight in Pounds Size in Inches Per Foot 12 Bar / / / / / / / / / /
67 UCold Finished Flats Weight in Pounds Size in Inches Per Foot 12 Bar 1/8 1/ / / / /4 1-3/8 1-1/2 1-3/ /4 2-1/2 2-3/ / / /16 3/8 1/2 5/8 3/4 7/ /4 1-3/8 1-1/2 1-3/ /4 2-1/2 2-3/
68 UCold Finished Flats Weight in Pounds Size in Inches Per Foot 12 Bar 3/ / / / / /4 3/8 1/2 5/8 3/ /4 1-1/2 1-3/ /4 2-1/2 2-3/ / /
69 UCold Finished Flats UWeight in Pounds Size in Inches Per Foot 12 Bar 5/16 1/ / / / / / /4 2-1/2 2-3/ /4 3-1/ / /8 1/2 5/8 3/ /4 1-1/2 1-3/ /4 2-1/2 2-3/
70 UCold Finished Flats UWeight in Pounds Size in Inches Per Foot 12 Bar 3/8 3-1/ / / / /2 5/8 3/ /4 1-1/2 1-3/ /4 2-1/2 2-3/ / /
71 UCold Finished Flats Weight in Pounds Size in Inches Per Foot 12 Bar 5/8 3/ / / / /4 2-1/2 2-3/ / / / / / / / / / / / / /
72 UCold Finished Flats UWeight in Pounds Size in Inches Per Foot 12 Bar 3/ / / / / / / / / / / / / / / /
73 UCold Finished Flats UWeight in Pounds Size in Inches Per Foot 12 Bar 1 2-1/ / / / /4 1-1/2 1-3/ / / / / / /2 1-3/ /4 2-1/
74 UCold Finished Flats UWeight in Pounds Size in Inches Per Foot 12 Bar 1-1/2 2-3/ / / / / / / / / /4 2-1/2 2-3/ / /
75 UCold Finished Flats Weight in Pounds Size in Inches Per Foot 12 Bar 2-1/4 2-1/ / / / /2 2-3/ / / / We Deliver Anywhere In Southwestern Ontario -72-
76 This section contains BAR SIZE ANGLES STRUCTURAL ANGLES
77 UBar Size Angles Weight in Pounds Size in Inches Per Foot 20 Bar 1/2 1/2 1/ /4 3/4 1/ / / / /4 1-1/4 1/ / / /2 1-1/2 1/ / / /4 1-3/4 1/ / / /2 1/ /16 1/ / / / / / /2 2-1/2 3/16 1/ /2 2 3/ / /16 3/8 2-1/2 2-1/2 3/16 1/4 5/16 3/8 1/
78 UStructural Angles UWeight in Pounds Size in Inches Per Foot 20 Bar 40 Bar 3 2 3/ / / / / /2 1/ / / / / / / / / /2 2-1/2 1/ / / / /2 3 1/ / / / /2 3-1/2 1/ / / / / /16 3/ / /2 1/ /16 3/ /
79 UStructural Angles UWeight in Pounds Size in Inches Per Foot 20 Bar 40 Bar 4 4 1/ / / / / / / / / / /2 1/ / / / / / / / / / / / /2 5/ / / / / / / / / / /
80 UStructural Angles UWeight in Pounds Size in Inches Per Foot 20 Bar 40 Bar 6 6 5/ / / / / / / / / / / / / / / / /
81 This section contains CHANNELS
82 UBar Size Channel UWeight in Pounds Size in Inches Per Foot 20 Bar 3/4 3/8 1/ /8 1/ /4 1/2 1/ /2 1/ /2 1/2 1/ /2 1/ / Junior (Stringer) Channel Size in Weight Flange Web Weight Inches Per Foot Width Thickness 20 Bar
83 UStructural Channels Nominal Flange Web Size in Weight Width in Thickness Inches Pounds Inches in Inches Canadian Metric C C C C C C C C C C C C C C C C C23020 C23022 C C C C C
84 UStructural Channels (continued) Nominal Flange Web Size in Weight Width in Thickness Inches Pounds Inches in Inches Canadian Metric C31031 C31037 C31045 C38050 C38060 C
85 UMiscellaneous Channels Nominal Wt. in Flange Web 20 Size Pounds Width Thickness Bar
86 UMiscellaneous Channels Nominal Wt. in Flange Web 20 Size Pounds Width Thickness Bar
SERVICES. Plasma Burning Shearing Sawing To Length Pipe and Tube Cutting Bundle Sawing Galvanizing Custom Processing
PRODUCTS Beam Channel Rail Angle Flat Bar Plate Floor Plate Abrasion Resistant / Wear Plate Sheet Galvanized Sheet Round Bar Square Bar Rectangle / Square / Round Tubing Pipe Cold Roll Expanded Metal /
ALUMINUM DISTRIBUTING, INC S.W. 2nd Ave. Ft. Lauderdale, FL Table of Contents
Table of Contents Page 2.........Equal & Unequal Angle Structural & Architectural Page 3.......................Flat Bar Structural Page 4.....................Flat Bar Architectural Page 5..... U Channel,
Shearing, bending, and rolling capabilities are available along with fabricating from hand drawn sketches to engineered drawings.
Tazgo Machine Inc. is a full service stocking warehouse. Items we stock include carbon, aluminum & stainless steel shapes, angles, beams, flats, hex bar, bar grating, squares, CR rounds in 1018,1045 &
Presby Steel, LLC. 143 East Milan Road Berlin, NH FAX:
143 East Milan Road 603-752-3022 FAX: 603-752-2821 1 S BEAMS (I Beams) Conforms to ASTM A36 Designation Web Depth/Inches Thickness Flange in Inches Area x Wt./Ft./Lbs. in Inches Width Thickness Sq. In.
Steel Reference Guide
(636) 456-8400 www.warrentonsteel.com 22280 W. Veterans Memorial Pkwy. Warrenton, MO 63383 Toll Free Fax: (866) 537-4554 Steel Reference Guide Phone / Fax / E-mail your orders All major credit cards accepted
Safety Grating DIAMOND-GRIP PRODUCT DESCRIPTION FEATURES & BENEFITS MATERIAL SPECIFICATIONS. Note:
DIAMOND-GRIP PRODUCT DESCRIPTION Diamond-Grip is a one-piece metal plank grating manufactured by a cold forming process in the shape of a channel. The web of the channel is the walking surface and has
BOSS STEEL Metal Reference Book Version 9
Intro BOSS STEEL Metal Reference Book Version 9 This ninth edition of the Boss Steel Metal Reference Book has been designed to inform and assist you in making the right decision when it comes to acquiring
PRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM
PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com
HSS SECTION PROPERTIES / SQUARES 1 OF 5
HSS SECTION PROPERTIES / SQUARES 1 OF 5 This publication presents tables of dimensions and section properties for square Hollow Structural Sections (HSS) produced by Bull Moose Tube Company. The dimensions,
Reference Guide SUPPLY INC.
Reference Guide SUPPLY INC. We have one fundamental mission: getting your job done! No matter what it takes, no matter what your need or schedule, our role as your supplier of steel, stainless steel, aluminum,
Est No. 1 Handbook of STEEL SIZES & WEIGHTS. For Industry Cross Street Eugene, Oregon USA
Est.1983 Coyote Steel & Co. No. 1 Handbook of STEEL S & S For Industry 2030 Cross Street Eugene, Oregon 97402 USA Phone: 541-461-2060 Toll-free: 1-800-553-0240 FAX: 541-461-0299 Good Steel, Good Service
TABLE OF CONTENTS. Safety Grating ALABAMA METAL INDUSTRIES CORPORATION
TABLE OF CONTENTS Safety Grating Page Diamond-Grip Channel... 1-6 Diamond-GripWalkway... 7-8 Safety-Grip Channel... 9-12 Safety-Grip Walkway...13-14 Safety-Tread Channel...15-16 Safety-Tread Flooring...17-18
Traction Tread Grating - Design Load Table of Contents & Advantages
- Design Load Table of Contents & Advantages Design Load Tables, aluminum, stainless steel Planks - 7" width... 54 Planks - 10" width... 55 Planks - 12" width... 56 Planks - 10" width, large hole... 57
STEEL PIPE STAINLESS ALUMINUM
STEEL PIPE STAINLESS ALUMINUM valleyiron.com sales@valleyiron.com 800--4766 FRESNO 4 S. Cherry Ave. Fresno, CA 9706 VACAVILLE 797 Elmira Road Vacaville, CA 9687 800--4766 9-48-900 9-44-0279 fax FRESNO
Product Range Handbook
Product Range Handbook 1 Where to find us Building 144 Culham Number 1 Site Station Road CULHAM Oxon OX14 3DA Sales: +44 (0)1865 409300 Fax: +44 (0)1865 407991 2 INDEX PAGE ROUND BARS 4 SQUARE BAR 5 TEES
EXPANDED METAL & GRATING
Expanded Metals* Carbon Steel Regular... 28 Flattened Expanded Metals Carbon Steel... 29 Expanded Metal Grating Carbon Steel Grate-X... 29 Electroforged Grating... 30 Serrated Bearing Bars... 30 Plain
GRATE-LOCK PRODUCT SPECIFICATIONS. GRATE-LOCK Plank with Grip or Smooth Surface. 1-1/2", 2-1/2", 3" (4" special order)
QUALITY HOLE PRODUCTS PLANK GRATING McNICHOLS Quality Plank Grating includes a variety of channel configuration choices and walkway styles. Plank Grating is a one-piece construction product that is lightweight
CONTACT INFORMATION. Charleston, WV Location. 901 Brooks Street Charleston, WV Telephone: (304)
CONTACT INFORMATION Poca, WV Location (River Plant) 300 Wright Glass Addition Road PO Box 1029 Poca, WV 25159 Telephone: (304) 755-5638 Sales Fax: (304) 755-8611 Accounting Fax: (304) 755-8589 Charleston,
Piling Product Guide Edition. Servicesteel.org
Piling Product Guide 2017 Edition Strong Foundations Starith Service Steel Service Steel Supplies All Your Foundation Products You Are Our Number One Priority From industry leading steel sheet piling to
B-LINE SERIES SGPC-16. Safety gratings. Safety gratings. Safety for every walk of life
Safety gratings SGPC-16 B-LINE SERIES Safety gratings Safety for every walk of life Product Applications Grip Strut Eaton s B-Line series safety grating offering is ideal for a wide variety of applications.
North Dakota. South Dakota. Utah. Idaho. Colorado. Nevada. Washington
Idaho Pacific Steel P.O. Box 530 1900 20th Street North Nampa, ID 83687 (208) 467-2113 1-800-727-9901 Fax (208) 466-9571 Boise Customers Call: (208) 345-3280 Pacific Steel & Recycling P.O. Box 1413 1987
GRIP STRUT STAIR TREADS
Safe Loading Stair Treads P&R METALS CALL TOLL-FREE: 1-877-880-3319 GRIP STRUT STAIR TREADS Load data below takes eccentric loads into consideration. Although load values include allowances for normal
Perf-O Grip Grating & Traction Tread Flooring
GSPOGTT-09 Perf-O Grip Grating & Traction Tread Flooring For Safe Walking-Working Surfaces Table of Contents General Information................................................. 3-4 Load Information.........................................................
LARGEST STOCK OF METRIC SIZE METALS IN AMERICA
WWW.METRICMETAL.COM METRIC SIZE METALS REFERENCE GUIDE 2009 ISO 9001:2000 Certifi ed LARGEST STOCK OF METRIC SIZE METALS IN AMERICA Our highly trained sales staff is waiting for your calls. With more than
Aluminium Alloy: EN Standards for Aluminium Extrusions
The old BS1474-1987 standard has been replaced by a number of EN standards of which the most important are: ALLOY GROUPS Alloy EN754 - Cold drawn rod, bar & tube EN755 - Hot extruded products EN12020 -
Metric Service. ISO 9001 Certified. Parker Steel Company Distribution Center in Toledo, Ohio
Click Here to Visit MetricMetal.com 2018 Parker Steel Metric Metals Reference Guide Parker Steel s New Offices at 1625 Indian Wood Circle, Maumee, Ohio 43537 The Largest Stock of Metric Size Metals in
Standard Stock Range. The UK s largest independent multi-metals stockholder.
Standard Stock Range The UK s largest independent multi-metals stockholder www.aalco.co.uk Aalco is the UK s largest independent multi-metals stockholder, with an extensive inventory of aluminium, stainless
FOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE PAGE 30
COLD ROLLED STEEL ROUND, SQUARE, FLAT, HEX AND S.S. ROUND, THREADED ROD 1018 COLD ROLLED STEEL ROUND 3 1/8 --- -- 101218 $.60 103618 $1.60 3/1 --- -- 1012316.65 1036316 1.75 1/4 --- -- 101214.95 103614
Stainless Steel Mill Products
Stainless Steel Mill Products Angle, Pipe, Rod, Bar, Sheet, Plate, Coil, Tubing and Wire ALASKAN COPPER & BRASS COMPANY History W hen Alaskan Copper Works was founded as a marine coppersmithing company
IS&G STEEL STOCKHOLDERS LTD PRODUCT GUIDE
IS&G STEEL STOCKHOLDERS LTD PRODUCT GUIDE IS&G IS&G Steel Stockholders Ltd have been established for over eighty years. We have branches at Beckenham in Kent; Chelmsford in Essex and Ipswich in Suffolk.
Plank Walkway Treads Rungs
Plank Walkway Treads Rungs Safer Serrated Surface Easy Install Maintenance Free Design High Load Capacity Versatile in Application Long Life GRIP STRT Non-serrated Surface Special Order 5 diamond plank
SEA PORT MARINE CORP.
Sea Port 600 Dock Float Sea Port Floats are rotationally molded for seamless one piece construction. All units are manufactured from linear virgin polyethylene resin containing U.V. ray inhibitors and
Series 2, 3, 4, & 5 Aluminum - Straight Sections
- Straight Sections I-1 B-Line series Cable Tray Systems - Accessories For Aluminum Fittings see fittings section pages L-1 thru L-17 How The Service Advisor Works We know that your time is important!
We Supply. You Build. Soon Hoe Steel Sdn Bhd. Your One Stop Steel & Fitting Supplier PRODUCT CATALOGUE. Group of Companies
We Supply. You Build. Soon Hoe Steel Sdn Bhd Your One Stop Steel & Fitting Supplier PRODUCT CATALOGUE CONTENT. ABOUT SOON HOE STEEL 4. CORPORATE VISION AND MISSION 4. CONTACT US 5. OUR PRODUCT 6. API PIPE
INSTALLATION INSTRUCTIONS AND PARTS LIST MODEL BRACKET PACKAGE TO MOUNT O-MEGA STEPS/GRIP STEPS VEHICLE APPLICATION: 2001 AND NEWER FORD VANS
INSTALLATION INSTRUCTIONS AND PARTS LIST MODEL 570124 BRACKET PACKAGE TO MOUNT O-MEGA STEPS/GRIP STEPS VEHICLE APPLICATION: 2001 AND NEWER FORD VANS READ INSTRUCTIONS COMPLETELY AND CHECK TO MAKE SURE
Product Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
Credit Card and EFTPOS Facilities available. Phone Orders welcome Deliveries/Transport arranged
Round, Square, Angle Page 3 Bright, Hollow Bar, Expanded Mesh Page 13 Flat Bar Page 4 House Columns/Posts Page 14 Channel, Structurals Page 5 Roofing, Purlins & Battens Page 15 RHS Square/Rectangular Tube
Grip Strut Safety Grating
GSSGST-09 Grip Strut Safety Grating Platforms, Walkways & Stair Treads For The Safest Walking-Working Surfaces Table of Contents & Advantages Advantages............................................. 2 Proof
ABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 8 71 335 SECTION 4 Cable Ladder and A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO91 Lic No 13146 EDITION 2 SECTION 4: Cable Ladder & Type 3/5 Type 4/7L Type
Alro Steel Metals Industrial Supplies Plastics
Alro Steel Metals Industrial Supplies Plastics Product Color Codes Created January 1, 2007 alro.com 888-888-ALRO 2 5 7 6 January 1, 2007 1 Alro delivers...everyday Product Color Codes Carbon Steel Bar...3
Series 2, 3, 4 Steel Cable Ladder Steel Cable Ladder, Series 2, 3, 4 & 5
Cable Ladder with Slotted Rung (shown with alternating slot orientation) Cable Ladder with Slotted Rung (shown with continuous slot down - also available with continuous slot up) HDS-1 Steel Cable Ladder,
I nsulati o n CATALOG OF MATERIALS, TOOLS & ACCESSORIES
I nsulati o n Fourth Revision The Kingspan System CATALOG OF MATERIALS, TOOLS & ACCESSORIES September 2018 Contents Page Introduction 3 Kingspan KoolDuct Panels & Ancillaries 4 Kingspan KoolDuct Flanges
Talon Products, LLC Conrad Anderson Made in USA. phone: USA. Talon cable cleats rung. In addition. Side-by-Side Installation
talo on T1 DATA SHEET Talon Products, LLC 47037 Conrad Anderson Hammond, Louisiana 70401 USA web: HugTheRung.com email: info1@ @HugTheRung.com phone: +1 985 956 7600 Typical Installation in Cable Tray
STOCK RANGE. Unit 16 Crondal Road Bayton Road Industrial Estate Coventry CV7 9NH.
STOCK RANGE 02476 932 999 sales@ajsteelservices.com Unit 16 Crondal Road Bayton Road Industrial Estate Coventry CV7 9NH www.ajsteelservices.com ABOUT ABOUT THE THE COMPANY AJ Steel Services is an independent
26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11.
26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11. DESCRIPTION: 26 000 LITRE INSULATED UN PORTABLE TANK, TYPE T11 For transport of product classes 3, 4,
GRADE 2 ELEVATOR BOLTS* Inch Series STEEL ZINC STAINLESS. Weight/ Boxes/ Full Case. Full Case
NO. 1 NORWAY FLAT COUNTERSUNK HEAD - 20 x 3/4 - -1/2-3/4-20 x 2-20 x 2- - 20 x 2-1/2-20 x 2-3/4-20 x 3-18 x 3/4-18 x 1-18 x 1-3/4-18 x 2-18 x 2- - 18 x 2-1/2-18 x 2-3/4-18 x 3-16 x 1-16 x 1- - 16 x 1-1/2-16
TECHNICAL BULLETIN. Audco Ball Valve. Reduced Bore Fire safe Flanged Ball Valves 51/52 Series. Experience In Motion
Audco Ball Valve Reduced Bore Fire safe Flanged Ball Valves 51/52 Series TECHNICAL BULLETIN Experience In Motion With the Series 51/52 designed to BS EN ISO 17292 / API 6D, AUDCO brings to the market a
bar grating USA: Fisher & Ludlow, Inc. Canada: Fisher & Ludlow
bar grating SA: Fisher & Ludlow, Inc. anada: Fisher & Ludlow introduction Quality People Delivering Quality Products and Services Today s construction projects demand the highest quality standards and
Structural Sections. Page 15
Page 15 MILD STEEL CHANNELS Product Shortname: CH AS 3679-300 AS 3679-350 (on indent only) BS4360-43A Mass per Metre = area of section x 0.00785 = kg/m Metres per Tonne = 1000 = metres kg/m Size (A x B)
ECCODUCT. In-Slab Duct Ventilation System ECCO is proud to be a member of: REV. W-4
MANUFACTURING EXCELLENCE HVAC Steel Duct Pipe & Fittings ECCODUCT In-Slab Duct Ventilation System www.eccoduct.com ECCO is proud to be a member of: SMACNA Sheet Metal and Air Conditioning Contractors National
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 05-07-2016 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
LSM SFM. METRIC SPECIFICATIONS and TECHNICAL INFORMATION
Metric Bushings Specifications M is for Metric RCM LSM SFM SFXM LM PM HM HLM SPM NM SCM FGM HGM SPECIFICATIONS and TECHNICAL INFORMATION BUSHING INFORMATION Application Information is listed on the specific
Industrial Range. Why Neumo...?
Why Neumo...? NEUMO opens the door to 1800 tonnes of Stainless Steel products. Our comprehensive stock range is carefully chosen to ensure NEUMO UK Ltd. can be your complete Stainless Steel logistics partner,
Marine 01. Polished and Bright Dipped. Lite Brushed and Bright Dipped
High Quality Marine Pipe 6463 Marine Pipe comes Boxed and Poly-Sleeved Suggested Applications: T-Tops, Tuna Towers, Half Towers, Marlin Towers, Leaning Posts, Bow Rails, Poling Platforms, etc. Western
TG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices
TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,
ROUNDS SQUARES GALVONALL. Refer to construction specification & tables within this section for more details. GALVONALL
GALVONALL PERMACOAT GALVONALL QUIK-ROK GALVONALL 18ga 17ga 16ga GBR-20 GBR-40 ROUNDS 1.315" (1 3/8") DIAMETER 1.660" (1 5/8") DIAMETER 1.900" (1 7/8") DIAMETER 2.375" (2 3/8") DIAMETER 2.875" (2 7/8")
Handrail Handrail I ; (/'' -*, 0+. '/'' )/, /*. nnn%cfzb\i%zfd%xl nnn%cfzb\ieq%zf%eq
Tubular Ball Handrail System Locker Group s tubular ball handrail system is a safe, strong simple barrier solution. The complete system lends itself to be quickly and economically erected in either a workshop
Hi-Tech specially designed components allow for fast and easy assembly.
OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces
Ford Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
MBG GRATINGS. MBG Metal Bar Grating HEAVY DUTY MANUAL METAL BAR GRATING AMERICAN NATIONAL STANDARD ANSI/NAAMM STANDARD GRATINGS FIFTH EDITION
METAL BAR GRATING AMERICAN NATIONAL STANDARD ANSI/NAAMM STANDARD MBG 532-09 GRATINGS 5 ANSI/NAAMM HMMA MBG 532-09 October 27, 2009 HEAVY DUTY METAL BAR GRATING MANUAL FIFTH EDITION Maximum Bearing Bar
3NL-32 / 3NI-32 / 3PLN-32 ROOF DECK GRADE 50 STEEL
3NL-32 / 3NI-32 / 3PLN-32 ROOF DECK GRADE 50 STEEL 3NL-32 Used With Sidelap Screws 3NI-32 Used With TSWs or BPs 3PLN-32 Used With PunchLok II System Nominal Dimensions Nested Sidelap 3NL-32 Interlocking
Fabricated Gratings QUALITY PRODUCTS COAST TO COAST
Fabricated Gratings QALITY PROTS OAST TO OAST orporate History Alabama Metal Industries orporation (AMIO) began in 1939 as a manufacturer of metal lath. AMIO has grown to become North America s leader
RECOMMENDED PROCEDURE FOR INSTALLATION OF DRILLCO MAXI-BOLT ANCHORS
RECOMMENDED PROCEDURE FOR INSTALLATION OF DRILLCO MAXI-BOLT ANCHORS Revision 0588VO By Drillco National Group P. O. Box 2182 Long Island City, NY 11102 Telephone: (800) 391-0052 www.drillcogroup.com techsupport@drillcogroup.com
Lindapter Fixing. Product Guide BAPP. G r o u p o f C o m p a n i e s
Lindapter Fixing Product Guide Steelwork Fixings ype A Nose Recess ype A Malleable iron, bright zinc plated / hot dip galvanised Clamping Area K Skirt ail Steelwork clamp with recessed top to hold the
DK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
Estimated Cable Fill Width in (mm) in 2 mm 2.30 OD. Cable Fill Area
ONTRAC WIRE MESH CABLE TRAY SYSTEM OnTrac Wire Mesh Cable Tray System CPI s OnTrac Wire Mesh Cable Tray System is an excellent solution for indoor cable pathway applications to create point-to-point pathways
Heavy Duty Grip Strut Grating Load Table of Contents - Advantages
Load Table of Contents - Advantages Grip Strut Design Load Tables Steel 2-Diamond planks - 91/4" width....68-69 3-Diamond planks - 133/4" width... 70-71 5-Diamond planks - 231/4" width... 72-73 6-Diamond
DIGIFLO ELECTRONIC FLOWMETER
DIGIFLO ELECTRONIC FLOWMETER PIPE FITTING INSTALLATION MANUAL SADDLE MACHINED IN-LINE BODY MOLDED IN-LINE BODY MOLDED TEE Blue-White R Industries, Ltd. F-2000 Page 2 1.0 Temperature vs. Pressure Temperature
We offer two fire retardant (FR) resins for strut systems: polyester and vinyl ester. Both resins are ideal for corrosive environments.
Materials We offer two fire retardant (FR) resins for strut systems: polyester and vinyl ester. Both resins are ideal for corrosive environments. While polyester is sufficient for most uses, vinyl ester
DRIVELINE COMPONENTS CATALOG CENTER YOKES, TUBE YOKES AND BALL STUD TUBE YOKES
DRIVELINE COMPONENTS CATALOG CENTER YOKES, TUBE YOKES AND BALL STUD TUBE YOKES JUNE 2008 Supersedes Section 5, Dated November 2005 Change Log: 10/2/08 pg 5 140-28-17 centerline to point of weld dimension
SIGNATURE SERIES FZPD PULL DOWN
SIGNATURE SERIES FZPD PULL DOWN Page Customer Support Services PARTS MANUAL CONTENTS PAGE COMPONENT ASSEMBLY COMPONENT ASSEMBLY II 4 COMPONENT ASSEMBLY LEGEND SEAT CARRIAGE ASSEMBLY SEAT CARRIAGE ASSEMBLY
C&N Industrial Group Limited. Better Pipeline, Better Connection.
C&N Industrial Group Limited Better Pipeline, Better Connection. About C&N Flange & Fitting producing Steel pipe expand & Welding Pipe accessories(jiangsu) Pipeline technology consult Incorporate on C&N
' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts
.., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED
talon T3 DATA SHEET HOLD THE CABLES. HUG THE RUNG. Talon Products, LLC Conrad Anderson Hammond, Louisiana USA
Talon Products, LLC 47037 Conrad Anderson Hammond, Louisiana 70401 USA web: HugTheRung.com email: info1@hugtherung.com phone: +1 985 956 7600 Typical Installation in Cable Tray Talon cable cleats utilize
BRACKETT AIRCRAFT CO., INC. HYDRAULIC WHEEL LIFT
BAC BAC H H 0 FLIGHTLINE DR. KINGMAN, AZ 0 9--00 BRACKETTAIRCRAFT.COM HYDRAULIC WHEEL LIFT G G 9 F 0 F E E 0 9 D LIFT PART NUMBER TY-TBW-RD TY-TBW-RD APPLICABLE TOW BAR TYPE " ROUND PIPE " ROUND PIPE D
A GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
2. Compartments 2 compartments with gallons front to rear with double bulkheads
January 10, 2016 STE # 11602 & 11605 (Ref. QT 3098/STE#10741-10744) ST&E SPECIFICATIONS FOR 4,000 US GALLON DOT-407 DOUBLE CONICAL STAINLESS STEEL INSULATED TWO COMPARTMENT TANDEM TRANSPORT TANK PREPARED
FIG Gruvlok Flange Adapter
FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method
DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 30 September 2011 SUPERSEDING MS51844D 19 April 2007 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department
argco.com
800-854-1015 argco.com STRUT SUPORT SYSTEM STRUT SUPPORT CHANNEL US Strut Support Channel Quick, strong attachment of single or multiple pipes horizontally or vertically Unlimited applications - range
ALUMINUM HORIZONTAL ROLLER WINDOW
ALUMINUM HORIZONTAL ROLLER WINDOW Series HR610 Monolithic glazing does not provide hurricane protection. Specifications: Window members are extruded from a minimum of 6063-T5 aluminum alloy Frame members
BEARING GUIDE. Bearing Guide Created by REV Robotics 2016, Licensed Under CC BY-SA 1
fg BEARING GUIDE This guide is intended as a reference on how to build with the new REV Robotics 15mm Building System using bearings and brackets to achieve basic motion. Bearing Guide Created by REV Robotics
PROFILE CUSTOM EXTRUSIONS BLAZING BEYOND EXPECTATIONS
PROFILE CUSTOM BLAZING BEYOND EXPECTATIONS STANDARD SHAPES CATALOG PROFILE EXTRUSION COMPANY P.O. BOX 121 ROME, GEORGIA, 30162-0121 PHONE: 706-234-7558 FAX: 706-234-7649 REVISED NOV 2014 STANDARD SHAPES
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers
0.16 TABLE OF CONTENTS anel cut out. BEAMS...pdf page 7 WIDE FLANGE BEAMS...
0.56 0.75 65.12 13.05.02.015 32.50 TABLE OF CONTENTS BEAMS...pdf page 7 WIDE FLANGE BEAMS...A1-A6 TUBING...pdf page 19 SQUARE TUBING...B1-B2 RECTANGULAR TUBING...B3-B7 PIPE...pdf page 30 WELDED AND SEAMLESS
1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
BAR GRATING
ANHOR - A device by which grating is attached to its supports. BAN - A flat bar welded to the end of a grating panel or along the line of a cutout, and extending neither above nor below the bearing bars.
CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
CARBON STEEL PIPE - BUTTWELD
010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 8.00 6.09 16.40 14.28 1/4" 0.42 9.61 8.25 15.27 12.91 3/8" 0.57 10.98 9.52 16.91 14.39
TiteWeld TM 7-TW-4 Welded Steel
TiteWeld TM -TW-4 Welded Steel IN STOK!! TiteWeld super narrow welded grating - ideal for those very tight spacing requirements when you need maximum roll-a-bility. TiteWeld satisfies both AA comfort requirements
Construct Compressed Air Building Near Bldg SECTION OVERHEAD COILING DOORS 07/07
SECTION 08 33 23 OVERHEAD COILING DOORS 07/07 PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to within
SafePro N Walton Walker Blvd, Dallas, TX (877)
SafePro 1355 N Walton Walker Blvd, Dallas, TX 75211 www.safeprosafety.com (877) 723-3570 Roof Hatch Safety Rails U.S. patent number 8,726,577 SafePro Roof Hatch Safety Rails are a patented 4-Sided Rail
Albuquerque Public Schools Industrial Fencing Material and Installation on Demand BID #18-059KN. Bid Tabulation Abstract
Albuquerque Public Schools Industrial Fencing Material and Installation on Demand BID #18-059KN Bid Tabulation Abstract ITEM # DESCRIPTION BRAND NAME Fabric - Smooth galvanized, 2 in. mesh, open hearth
Series 1 Steel - Straight Sections
Series 1 Steel - Straight Sections Series 1 Steel H-1 B-Line series Cable Tray Systems Series 1 Steel - ccessories & Fittings Series 1 Steel How The Service dvisor Works We know that your time is important!
STRUCTURAL STAINLESS STEEL DESIGN TABLES IN ACCORDANCE WITH AISC DG27: STRUCTURAL STAINLESS STEEL
STRUCTURAL STAINLESS STEEL DESIGN TABLES IN ACCORDANCE WITH AISC DG27: STRUCTURAL STAINLESS STEEL Explanatory Notes: Version 1.0 11/6/2017 SCI (The Steel Construction Institute) is the leading, independent
USS-LIBERTY FJM. A True Flush Connection for Clearance-Critical Applications
USS-LIBERTY FJM A True Flush Connection for Clearance-Critical Applications USS-LIBERTY FJM A True Flush Connection for Clearance-Critical Applications Reverse angle torque shoulder External metal-to-metal
Curving (S) (L) CHORD (C) (IR) (IR) Example
Showcases Showcase systems offer a wide selection of framing, lighting and door options that allow you to integrate the components of your choice into a custom showcase that meets your exact specifications.
Access. Systems. Aluminium Stanchions
Access Systems minium Stanchions Safety Barrier Stanchion spacing dimensions must be nominated on the drawings. Stanchion type must be nominated. For stairways the stair angle must be nominated. As per
Talk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07. Head Office: Cape Town: Durban: Tel Tel.
Talk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07 Head Office: Cape Town: Durban: Piet Rautenbach Steet Tel. +27 12 541-3211 Tel. +27 21 949-0658 Tel. +27 31 701-6078 P.O. Box