Price List & Technical Manual August

Size: px

Start display at page:

Download "Price List & Technical Manual August"

Meredith Hoover
5 years ago
Views:

1 Price List & Technical Manual August 2009

2 Pacific Clip Shelving 11 2 offers the versatility of inter-changeable components for all open and closed shelving units, the option of assembling with bolts and nuts (rather than clips), and the choice of front posts. Starter and Adder models are available in most sizes. Heights to 22' without splicing (most configurations) Widths to 48" Depths to 36" Standard heights (85") and (97") Vertical shelf adjustments in 1 1 " increments Sliding Divider 2 Full Divider 3 Angle Divider 4 Side Sway Braces 5 Back Sway Braces 6 Closed Base Strip Shelving Components 7 Label Holder 8 End Panel 9 Back Panel 10 Bin Front 11 Shelf Clip Foot Plate 9 6 Shelving System Growth When determining sizes of Pacific shelving systems, the post size will increase the overall width and depth as shown below. Angle Post Delta Post Beaded Post Add to Shelf Width: 3 8" per unit 3 8" per unit 3 8" per unit + 1 " per row + 3 4" per row Add to Shelf Depth: 1 16" 1 16" 13 16" To Determine Shelf Clear Opening, Subtract from Shelf Width: 1 7 8" 1 8" 5 8" Examples using 36" x " units, 2 wide by 2 deep " " 73 1 " " x 36" " x 36" " x 36" " x 36" 1 8" " x 36" " x 36" " x 36" " x 36" 1 8" " x 36" " x 36" " x 36" " x 36" " Angle Posts " Delta Posts " Beaded Posts " Overall width = " Overall depth = 1 8" Clear opening per shelf = " Overall width = " Overall depth = 1 8" Clear opening per shelf = " Overall width = 73 1 " Overall depth = " Clear opening per shelf = " 2

3 Post Designs All posts roll formed of heavy gauge steel Posts adaptable to all storage arrangements except as noted Heights available from 5' to 22' (most styles) Angle Post Our most popular style Stiffening offset rib Ideal for seismic applications Always used as rear posts in combination with other posts Shelf access is reduced by " Delta Post Double-sided design with independent shelf positioning ideal as common posts between multiple units Unobstructed shelf access Smooth front face for office applications Roll-formed of 14-gauge steel Not suitable for seismic or heavy-duty applications Beaded Post Double-sided design with independent shelf positioning ideal as common posts between multiple units Maximum weight-bearing capacity for heavy-duty and mezzanine applications 13-gauge tubular steel design Catwalk Systems Engineered to meet or exceed all OSHA requirements, catwalk systems make use of wasted overhead space while minimizing utility costs. Shelf Clip Designed for easy installation and repositioning, shelf clips are formed of heavy gauge steel for maximum weight bearing capability. Calculating Post Height First calculate the center-to-center spacing: 1 Determine the minimum clear vertical opening required per shelf. 2 Add 1 1 4" (shelf profile) and round up to the nearest 1 1 " increment. Next calculate the minimum post height: 3 Multiply the center-to-center distance by the required number of shelf openings. 4 Add 4" for the bottom shelf opening plus the profile of the first shelf. If you wish to bolt the first shelf closer to the ground, add either 2 1 2" or1". " " Example Shown (7 Shelves / 6 Shelf Openings) If the minimum clear vertical opening is =11 3 4" then the center-to-center spacing is =13 1 2" If 6 shelf openings are required the total post height is (13 1 2" x6)+4"=85" 3

4 Shelf Construction Shelves are gauge, except Class 0, which are 20 gauge All shelves double flanged on sides and triple flanged front and rear Tops are punched on 2" centers for adjustment of dividers Front and rear faces are punched for label holders, angle sway braces and reinforcing bars and angles Standard widths: 30", 36", 42", 48" Standard depths: ", ", ", ", 30", 36" Note: reinforcing bars and angles are sold separately and installed at customer location Class 0 20 gauge metal for light loads no reinforcements Class 1 gauge metal for normal loads no reinforcements Class 1B gauge metal for normal to medium loads 1"x 1 8" bar in front flange Class 1A gauge metal for medium loads 1"x1"x 1 8" angle in front Class 2B gauge metal for medium to heavy loads 1"x 1 8" bar in front and rear flanges Class 2A gauge metal for heavy loads 1"x1"x 1 8" angle in front and rear flanges Shelf Size Width/Depth Shelf Load Capacities Weight Capacity (lbs./shelf) Evenly Distributed Load Class 0 Class 1 Class 1B Class 1A Class 2B Class 2A 30 x N/A N/A N/A N/A N/A N/A x N/A N/A x x

5 Clip Shelving Standard Open Units (Class 1 Shelves) Starter Unit Shelves/Unit Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) Angle Post 5 36 x A A A A A x A A A A A x A A A A A x A A A A Angle Post A x A A A A A x A A A A A x A A A A A x A A A A Angle Post A x A A A A A x A A A A A x A A A A A x A A A A A Model Number Explanation A Types of Units Type of Unit Nominal Height (ft.) No. of Shelves Width (in.) Depth (in.) (optional) 1 Open, Angle Post 2 Closed, Angle Post 3 Open, Delta Post (front) 4 Closed, Delta Post (front) 5 Open, Beaded Post (front) 6 Closed, Beaded Post (front) LD Light Duty Non-stock items Low stock items Hardware included with Open Units: Nuts and bolts for top and bottom shelves Clips for intermediate shelves (optional for top and bottom) 5

6 Clip Shelving Standard Open Units (Class 1 Shelves) Starter Unit Shelves/Unit Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) Angle Post 8 36 x A A A A A x A A A A A x A A A A A x A A A A Delta Post A x A A A A A x A A A A A x A A A A Delta in front only; Angle Posts at rear A Note: subtract " for clear opening height 48 x A A A A Delta Post A x A A A A A x A A A A A x A A A A Delta in front only; Angle Posts at rear A x A A A A A Model Number Explanation A Types of Units Type of Unit Nominal Height (ft.) No. of Shelves Width (in.) Depth (in.) (optional) 1 Open, Angle Post 2 Closed, Angle Post 3 Open, Delta Post (front) 4 Closed, Delta Post (front) 5 Open, Beaded Post (front) 6 Closed, Beaded Post (front) LD Light Duty Non-stock items Low stock items Hardware included with Open Units: Nuts and bolts for top and bottom shelves Clips for intermediate shelves (optional for top and bottom)

7 Clip Shelving Standard Open Units (Class 1 Shelves) Starter Unit Shelves/Unit Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) Delta Post 7 36 x A A A A A x A A A A A x A A A A Delta in front only; Angle Posts at rear A x A A A A Delta Post A x A A A A A x A A A A A x A A A A Delta in front only; Angle Posts at rear A Note: subtract " for clear opening height 48 x A A A A Beaded Post A x A A A A A x A A A A A x A A A Beaded in front only; Angle Posts at rear A A Note: subtract 1 1 4" for clear opening height 48 x A A A A A Open Shelving Starter Unit Angle Post Delta Post Beaded Post Angle Post Delta Post Beaded Post Posts (front) (2) Angle (2) Delta (2) Beaded (2) Angle (1) Delta (1) Beaded Posts (rear) (2) Angle (2) Angle (2) Angle (2) Angle (2) Angle (2) Angle Sway Braces (side/pair) Sway Braces (rear/pair)

8 Clip Shelving Standard Open Units (Class 1 Shelves) Starter Unit Shelves/Unit Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) Beaded Post 6 36 x A A A A A x A A A A A x A A A A Beaded in front only; Angle Posts at rear A Note: subtract 1 1 4" for clear opening height 48 x A A A A Beaded Post A x A A A A A x A A A A A x A A A A Beaded in front only; Angle Posts at rear A Note: subtract 1 1 4" for clear opening height 48 x A A A A Beaded Post A x A A A A A x A A A A A x A A A A Beaded in front only; Angle Posts at rear A Note: subtract 1 1 4" for clear opening height 48 x A A A A A Model Number Explanation A Types of Units Type of Unit Nominal Height (ft.) No. of Shelves Width (in.) Depth (in.) (optional) 1 Open, Angle Post 2 Closed, Angle Post 3 Open, Delta Post (front) 4 Closed, Delta Post (front) 5 Open, Beaded Post (front) 6 Closed, Beaded Post (front) LD Light Duty Non-stock items Low stock items Hardware included with Open Units: Nuts and bolts for top and bottom shelves Clips for intermediate shelves (optional for top and bottom)

9 Clip Shelving Standard Closed Units (Class 1 Shelves) Starter Unit Shelves/Unit Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) Angle Post 5 36 x A A A x A A A x A A A x A A A Angle Post 6 36 x A A A x A A A x A A A x A A A Angle Post 7 36 x A A A x A A A x A A A x A A A Angle Post 8 36 x A A A x A A A x A A A x A A A Closed Shelving Starter Unit Angle Post Delta Post Beaded Post Angle Post Delta Post Beaded Post Posts (front) (2) Angle (2) Delta (2) Beaded (2) Angle (1) Delta (1) Beaded Posts (rear) (2) Angle (2) Angle (2) Angle (2) Angle (2) Angle (2) Angle Side Panels (each) Back Panels (each) Base Strips (each) Note: Back and side panel are supplied as 2 or more pieces. 9

10 Clip Shelving Standard Closed Units (Class 1 Shelves) Starter Unit Shelves/Unit Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) Delta Post 5 36 x A A A x A A A x A A A x A A Delta in front only; Angle Posts at rear A Note: subtract 1 1 4" for clear opening height Delta Post 6 36 x A A A x A A A x A A A x A A A Delta in front only; Angle Posts at rear Note: subtract 1 1 4" for clear opening height Delta Post 7 36 x A A A x A A A x A A A x A A Delta in front only; Angle Posts at rear A Note: subtract 1 1 4" for clear opening height Delta Post 8 36 x A A A x A A A x A A A x A A Delta in front only; Angle Posts at rear A Note: subtract 1 1 4" for clear opening height 10 Model Number Explanation A Types of Units Type of Unit Nominal Height (ft.) No. of Shelves Width (in.) Depth (in.) (optional) 1 Open, Angle Post 2 Closed, Angle Post 3 Open, Delta Post (front) 4 Closed, Delta Post (front) 5 Open, Beaded Post (front) 6 Closed, Beaded Post (front) LD Light Duty Hardware included with Closed Units: Nuts and bolts for top and bottom shelves Clips for intermediate shelves (optional for top and bottom) Closed Base Strips

11 Clip Shelving Standard Closed Units (Class 1 Shelves) Starter Unit Shelves/Unit Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) Beaded Post 5 36 x A A x A A A A x A A A x A A Beaded in front only; Angle Posts at rear A Beaded Post 6 36 x A A A x A A A x A A A x A A Beaded in front only; Angle Posts at rear A Beaded Post 7 36 x A A A x A A A x A A A x A A Beaded in front only; Angle Posts at rear A Beaded Post 8 36 x A A A x A A A x A A A x A A Beaded in front only; Angle Posts at rear A Closed Shelving Starter Unit Angle Post Delta Post Beaded Post Angle Post Delta Post Beaded Post Posts (front) (2) Angle (2) Delta (2) Beaded (2) Angle (1) Delta (1) Beaded Posts (rear) (2) Angle (2) Angle (2) Angle (2) Angle (2) Angle (2) Angle Side Panels (each) Back Panels (each) Base Strips (each) Note: Back and side panel are supplied as 2 or more pieces. 11

12 Light Duty Open Units (Class 0 Shelves) Starter Unit Shelves/Unit Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) 5 36 x LD LD070536A LD LD070536A LD LD070536A LD LD070536A x LD LD070548A LD LD070548A LD LD070548A LD LD070548A x LD LD080536A LD LD080536A LD LD080536A LD LD080536A x LD LD080548A LD LD080548A LD LD080548A LD LD080548A Angle Posts 6 36 x LD LD070636A LD LD070636A LD LD070636A LD LD070636A x LD LD070648A LD LD070648A LD LD070648A LD LD070648A x LD LD080636A LD LD080636A LD LD080636A LD LD080636A x LD LD080648A LD LD080648A LD LD080648A LD LD080648A Angle Posts 7 36 x LD LD070736A LD LD070736A LD LD070736A LD LD070736A x LD LD070748A LD LD070748A LD LD070748A LD LD070748A x LD LD080736A LD LD080736A LD LD080736A LD LD080736A x LD LD080748A LD LD080748A LD LD080748A LD LD080748A Model Number Explanation A Types of Units Type of Unit Nominal Height (ft.) No. of Shelves Width (in.) Depth (in.) (optional) 1 Open, Angle Post 2 Closed, Angle Post 3 Open, Delta Post (front) 4 Closed, Delta Post (front) 5 Open, Beaded Post (front) 6 Closed, Beaded Post (front) LD Light Duty Non-stock items Low stock items Hardware included with Light Duty units: Nuts and bolts for top and bottom shelves Clips for intermediate shelves (optional for top and bottom)

13 Light Duty Open Units (Class 0 Shelves) Starter Unit Shelves/Unit Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) Angle Posts 8 36 x LD LD070836A LD LD070836A LD LD070836A LD LD070836A x LD LD070848A LD LD070848A LD LD070848A LD LD070848A x LD LD080836A LD LD080836A LD LD080836A LD LD080836A x LD LD080848A LD LD080848A LD LD080848A LD LD080848A Bin Units (Class 1 Shelves) Starter Unit Openings Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) D D-08A D D-08A D D-10A D D-10A D D-10A D , ,1.30 5D-10A , , D , , D-14A , , D , ,0.06 5D-14A , , Bin Units 36 x 2D D-08A x 3D D-10A x 5D D-10A x 5D D-14A Dividers ship with clips for easy assembl y Dividers are adjustable on 2" center s Available with Class 1 shelves and Angle P osts only Back and side panel are supplied as 2 or more pieces Openings 36 Openings 54 Openings 78 Openings () "wx"h (3) "wx9"h (36) 9" wx9"h (54) 6" wx9"h (72) 6"wx6"h (6) 6"wx9"h Note: subtract 1 1 4" (shelf prof ile) for true opening height 13

Multi-level Riv Pak Units Systems Starter Unit Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) Riv Pak Units Consult our Engineering Department for 36 x 07RP36-5 56.1 95.

33 Our designs meet OSHA, UBC, and seismic requirements. Engineered calculations and stamped drawings for permit applications are available. 48 x 07RP48-5 67.7 3.61 07RP48-5A 65.3 119.33 07RP48-5 84.

53 Combines Pacific shelves with RiveTier uprights No sway braces, cross braces or corner gussets required Uses utility clips (UC) rather than standard compression clips (HW1103) Not suitable for

guardrail included Custom engineered Available with continuous uprights or spliced shelving Open and closed risers Decking is 9" metal plank Constructed of corrosion-resistant galvanized steel Meet

intermediate landing Standard return shown Length/Width Model No. Wt. (lbs) List ($) Length/Width Model No. Wt. (lbs) List ($) Grating 30 x 9 GR-030 6.5 22.92 60 x 9 GR-060 13.0 45.73 36 x 9 GR-036 7.

14 Multi-level Riv Pak Units Systems Starter Unit Height Width/Depth Model No. Wt. (lbs) List ($) Model No. Wt. (lbs) List ($) Riv Pak Units Consult our Engineering Department for 36 x 07RP RP36-5A solutions for your catwalk, mezzanine and 07RP RP36-5A highrise applications. 07RP RP36-5A Our designs meet OSHA, UBC, and seismic requirements. Engineered calculations and stamped drawings for permit applications are available. 48 x 07RP RP48-5A RP RP48-5A RP RP48-5A Combines Pacific shelves with RiveTier uprights No sway braces, cross braces or corner gussets required Uses utility clips (UC) rather than standard compression clips (HW1103) Not suitable for heavy duty or seismic applications Stairs Made to UBC and OSHA specifications Catwalk Systems Standard Return / Double Return Sold as knock-down unit Available in knock-down or all welded 3 rail guardrail included Custom engineered Available with continuous uprights or spliced shelving Open and closed risers Decking is 9" metal plank Constructed of corrosion-resistant galvanized steel Meet or surpass all OSHA requirements Handicap end loops available; welded or KD C-channel frame with 4 columns as required Landings over ' tall include center strut bracing Stairs over ' tall require an intermediate landing Standard return shown Length/Width Model No. Wt. (lbs) List ($) Length/Width Model No. Wt. (lbs) List ($) Grating 30 x 9 GR x 9 GR x 9 GR x 9 GR x 9 GR-042 Decking Options 144 x 9 GR x 9 GR /4" or11/ Deck Pak over B Deck Bar Grating Used for decking and stairway treads Grating catwalk Pak installations Units are 1 1 " deep Plank - Pak Additional sizes available on request Diamond Plate Handrail - Gates Standard or public access End of aisle Gates lift out, swing, and slide Aisle Deck Supports Beaded to Beaded Beaded to Angle Angle to Angle Cross-Aisle Length Model No. Wt. (lbs) List ($) Length Model No. Wt. (lbs) List ($) Beaded to 36 ADS-B-B Beaded to 36 ADS-B-A Beaded Post 45 ADS-B-B Angle Post 45 ADS-B-A ADS-B-B ADS-B-A Angle to 36 ADS-A-A Cross-Aisle 36 ADS-A-A Angle Post 45 ADS-A-A (Beaded to 45 ADS-A-A ADS-A-A Beaded/Angle 48 ADS-A-A Non-stock items Low stock items

15 Size (inches) Model No. Wt. (lbs) List ($) Accessories and Components Size (inches) Model No. Wt. (lbs) List ($) Angle Posts Height 40 CP CP CP CP CP CP CP CP CP CP Delta Posts Height 61 DP DP DP DP DP DPl DP Beaded Posts Height 61 BP BP BP BP BP BP BP BP BP Sway Braces Length 17 SB/ SB/ SB SB32/ SB42/ sold in pairs Closed Base Strips 1 1 x 36 CB CB CB x 30 CB CB CB CB Standard Shelves 30 x SH ( gauge) SH SH SH SH SH x SH SH SH clips included SH SH SH x SH SH SH SH SH SH SH x SH SH SH SH SH SH Standard Shelves 36 x SH (20 gauge) SH SH SH x SH SH SH SH x SH clips included SH SH SH Shelf Reinforcing Angle RA RA RA RA RA RA Shelf Reinforcing Bar 30 RB RB RB RB Label Holders 30 LH LH LH LH Welded End x 73 DEA Upright Assembly 85 DEA (Delta Post) 88 DEA DEA DEA DEA

16 Size (inches) Model No. Wt. (lbs) List ($) Accessories and Components Size (inches) Model No. Wt. (lbs) List ($) Welded End x 73 DEA Upright Assembly 85 DEA (Delta Post) 88 DEA DEA DEA DEA x 73 DEA DEA DEA DEA DEA DEA x 73 DEA DEA DEA DEA DEA DEA Welded Intermediate x 73 DIA Upright Assembly 85 DIA (Delta Post) 88 DIA DIA DIA DIA x 73 DIA DIA DIA DIA DIA DIA x 73 DIA DIA DIA DIA DIA DIA x 73 DIA DlA DIA DlA DIA DIA Welded End x 73 AEA Upright Assembly 85 AEA (Angle Post) 88 AEA AEA AEA AEA x 73 AEA AEA AEA AEA AEA AEA x 73 AEA AEA AEA AEA AEA AEA x 73 AEA AEA AEA AEA AEA AEA Welded Intermediate x 73 AIA Upright Assembly 85 AIA (Angle Post) 88 AIA AIA AIA AIA x 73 AIA AIA AIA AIA AIA AIA x 73 AIA AIA AIA AIA AIA AIA x 73 AIA AIA AIA AIA AIA AIA Welded End x 73 BEA Upright Assembly 85 BEA (Beaded Post) 97 BEA BEA BEA x 73 BEA BEA BEA BEA BEA x 73 BEA BEA BEA BEA BEA x 73 BEA BEA BEA BEA BEA Welded Intermediate x 73 BIA Upright Assembly 85 BIA (Beaded Post) 97 BIA BIA BIA x 73 BIA BIA BIA BIA BIA Non-stock items Low stock items

17 Size (inches) Model No. Wt. (lbs) List ($) Accessories and Components Size (inches) Model No. Wt. (lbs) List ($) Welded Intermediate x 73 BIA Upright Assembly 85 BIA (Beaded Post) 97 BIA BIA BIA x 73 BIA BIA BIA BIA BIA End Panels x 40 SD SD SD SD SD SD SD SD Furnished in x 40 SD two pieces 61 SD SD SD SD SD SD SD x 40 SD SD SD SD SD SD SD SD x 40 SD SD SD SD SD SD SD SD Back Panels 30 x 40 BA BA BA BA BA BA BA BA Furnished in 36 x 40 BA two pieces 61 BA BA BA BA BA BA BA x 40 BA BA BA BA x 88 BA BA BA BA x 40 BA BA BA BA BA BA BA BA Full Shelf Dividers d x 9h DIV h DIV d x 9h DIV h DIV h DIV h DIV d x 9h DIV h DIV Bolts or clips into place h DIV Sliding Dividers d x 6h SLD h SLD d x 6h SLD h SLD d x 6h SLD h SLD d x 6h SLD h SLD Drops into place Not for use with bin front or closed base strip Angle Dividers d x 4h AD h AD h AD d x 4h AD h AD h AD d x 4h AD h AD Bolts or clips 9h AD into place Not for use with d x 4h AD bin front 6h AD h AD Bin Fronts 1 1 h x 36 w BF hx36 w BF h x 42 w BF hx42 w BF hx48 w BF hx48 w BF Adapters sold separately 17

Q-LINE SHELVING Shelves

Q-LINE SHELVING Shelves Shelves BOX FORM SHELVES SOLID SHELVES Punched on 1 1 /2" centers for optional bin dividers (BD-ddhh). PERFORATED SHELVES SHELF INFORMATION (Pertains to all shelves on this page.) All shelves are Box Beam