PRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH
|
|
- Adela Morgan
- 5 years ago
- Views:
Transcription
1 PRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH
2
3 INDEX 01. HOT ROLLED REINFORCING BARS PAGE WIRE ROD PAGE BILLET FROM CONTINUOUS CASTING PAGE WELDED WIRE MESH PAGE 10
4 2015 ADA - ACERIA DE ANGOLA - ALL RIGHTS RESERVED Page 4
5 HOT ROLLED REINFORCING BARS ADA 500 NR DESCRIPTION Hot rolled and weldable ribbed steel with a characteristic yield strength of 500 Mpa. Diameters In bars: mm / In coils: mm. EQUIVALENCES WITH DIFFERENT GRADES AND STANDARDS COUNTRY STANDARD GRADE Portugal LNEC E 450 A 500NR Spain UNE B 500S France NF A B 500B United Kingdom BS 4449 B 500B Germany DIN 488 B 500B EQUIVALENCES WITH DIFFERENT GRADES AND STANDARDS ANALYSIS IN CHEMICAL COMPOSITION % MAX C P S N Cu CEV Cast Product EQUIVALENCES WITH DIFFERENT GRADES AND STANDARDS COUNTRY STANDARD GRADE Re Yield Strength nominal (Mpa) Rm Tensile Strength nominal (Mpa) Rm/Re Ratio nominal Agt Elongation nominal (%) ADA 500NR Portugal LNEC E 500 A 500NR Spain UNE B 500S France NF A B 500B UK BS 4449 B 500B Germany DIN 488 B 500B MARKING Identification marking of ADA Aceria de Angola is: 0 / 9 / 51-0: read start - 9: Country outside Europe - 51: Manufacturer BAR PACKAGING Package length: 6 to 15 meters. Package weight: to kilograms. LABELING Each package or coil is labeled with a label where there is all relevant information of the product. QUALITY MANAGEMENT SYSTEM The ribbed bar produced in ADA is produced under the requirements of the international standard ISO COIL 2015 ADA - ACERIA DE ANGOLA - ALL RIGHTS RESERVED Page 5
6 2015 ADA - ACERIA DE ANGOLA - ALL RIGHTS RESERVED Page 6
7 WIRE ROD RAW MATERIAL DESCRIPTION Raw material for cold drawing and cold rolling. Diameters: GRADES AND STANDARDS CHEMICAL COMPOSITION (%) STANDARD GRADE C MN SI P S ASTM A29 SAE ASTM A29 SAE EN C9D COIL DIMENSIONS AND WEIGTH External diameter D(ex): mm. Internal diameter D(in): 900 mm. Length L: 500 mm. Weight kilograms (aprox.) LABELING Each coil has a label with the following information: Diameter. Heat number. Grade and Standard. QUALITY MANAGEMENT SYSTEM The wire rod produced in ADA Aceria de Angola is produced under the requirements of the international standard ISO ADA - ACERIA DE ANGOLA - ALL RIGHTS RESERVED Page 7
8 2015 ADA - ACERIA DE ANGOLA - ALL RIGHTS RESERVED Page 8
9 BILLET FROM CONTINUOUS CASTING STEEL LONG PRODUCTS DESCRIPTION Billet is the semiproduct to produce steel long products. CHEMICAL COMPOSITION CHEMICAL COMPOSITION (%) QUALITY C MN SI P S Rebar SAE SAE C9D BILLET DIMENSION AND WEIGHT Square: 130 x 130 mm Length: 6 meters (tolerance +/- 100mm) Weight: kg (aprox.) QUALITY MANAGEMENT SYSTEM The billet produced in ADA Aceria de Angola is produced under the requirements of the international standard ISO ADA - ACERIA DE ANGOLA - ALL RIGHTS RESERVED Page 9
10 2015 ADA - ACERIA DE ANGOLA - ALL RIGHTS RESERVED Page 10
11 WELDED WIRE MESH CONCRETE REINFORCEMENT DESCRIPTION Welded wire mesh used for concrete reinforcement as walls and slabs TYPES OF WELDED MESH Welded mesh produce in roll format and spools with cold rolled wires (Mesh wide: 2500 mm Maximum length: 50 m) Wire diameter Distance Wire Section between two numbers per meter Line Cross Type of wire Type of mesh Line Cross Line Cross Line Cross Weight per square meter Rolled mesh weigth Rolled mesh length (mm) (mm) (mm) (mm) (nº) (nº) (cm2/m) (cm2/m) (kg/m2) (kg) (m) Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll Cold Ribbed Roll ADA - ACERIA DE ANGOLA - ALL RIGHTS RESERVED Page 11
12 WELDED WIRE MESH CONCRETE REINFORCEMENT TYPES OF WELDED MESH Welded mesh produce in sheets format with cold rolled wires (Mesh wide: 2500 mm Sheet length: 6000 mm) Wire diameter Distance Section Wire numbers between two per meter Line Cross Type of wire Type of mesh Line Cross Line Cross Line Cross Weight per square meter (mm) (mm) (mm) (mm) (nº) (nº) (cm2/m) (cm2/m) (kg/m2) Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet Cold Ribbed Sheet ADA - ACERIA DE ANGOLA - ALL RIGHTS RESERVED Page 12
13 WELDED WIRE MESH CONCRETE REINFORCEMENT TYPES OF WELDED MESH Welded mesh produce in sheets format with ADA 500NR wires (Mesh wide: 2500 mm Sheet length: 6000 mm) Wire diameter Distance Section Wire numbers between two per meter Line Cross Type of wire Type of mesh Line Cross Line Cross Line Cross Weight per square meter (mm) (mm) (mm) (mm) (nº) (nº) (cm2/m) (cm2/m) (kg/m2) Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet Hot Ribbed Sheet MECHANICAL PROPERTIES OF THE WELDED MESH WIRES WIRE DIAMETER STANDARD GRADE RE YIELD STRENGTH NOMINAL (MPA) RM/RATIO NOMINAL AGT ELONGATION NOMINAL (%) EN B 500A ADA 500NR LABELING Each package or coil is labeled with a label where there is all relevant information of the product. QUALITY MANAGEMENT SYSTEM The WELDED MESH produced in ADA Aceria de Angola is produced under the requirements of the international standard ISO ADA - ACERIA DE ANGOLA - ALL RIGHTS RESERVED Page 13
14 Address. Barra de Dande. Bengo GPS Phone. (+244 ) admin@adasteel.com Web.
ÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis Aspropyrgos Tel.: Fax:
ÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis 193 00 Aspropyrgos Tel.: +30 210 5515000 Fax: +30 210 5515015 www.elastron.gr elastron@elastron.gr 1 RECTANGULAR HOLLOW SECTIONS (EN 10219) Dimensions Cross
More informationReinforcing steel bars
Reinforcing steel bars 6 The Company produces the reinforcing rolled steel according to the international and national standards: DSTU 3760:2006 (Ukraine) GOST 5781-82 (international standard) GOST 10884-94
More informationJIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
More informationArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR. Innovative high strength steels for economical steel structures
ArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR Innovative high strength steels for economical steel structures Shanghai World Finance Center, P.R. China Innovative high strength
More informationHybox 355 technical guide Structural hollow sections
Hybox 355 technical guide Structural hollow sections Contents 03 Introduction 04 Technical data 06 Size range charts 08 Sectional properties Hybox 355 Circular 11 Sectional properties Hybox 355 Square
More information3.1 Available sections, terms of delivery
3.1 Interlocks LARSSEN section Interlock design conforming to DIN EN 10248-2 and E 67 of EAU 2004 LARSSEN 43, 430 HOESCH section (LARSSEN interlock) Interlock design conforming to DIN EN 10248-2 and E
More informationTube & Pipe Division
Tube & Pipe Division Cu-Ni / Brass / Al-Brass / Copper CONTENTS 01 GREETINGS 02 HSE STATEMENT 03 MANUFACTURING PROCESS 04 COMPANY PROFILE 05 QUALITY 06 ~ 07 PRODUCTS 08 EUROPE STANDARD 09 USA STANDARD
More informationDEUTSCHE NORM DIN EN 10080
DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,
More informationÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis Aspropyrgos Tel.: Fax:
ÅLASTRON S.A. Ag. Ionnis str., Ag. Ionnis 193 00 Aspropyrgos Tel.: +30 210 5515000 Fx: +30 210 5515015 www.elstron.gr elstron@elstron.gr 1 SQUARE HOLLOW SECTIONS (EN 10219) Dimensions Cross section Weight
More informationDear Business Partners,
PRODUCT CATALOGUE Dear Business Partners, MERETUK FOREIGN TRADE is an independent steel trading company based in Iskenderun / Hatay / TURKEY. We are involved in trading and marketing of long, tubular,
More informationTalk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07. Head Office: Cape Town: Durban: Tel Tel.
Talk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07 Head Office: Cape Town: Durban: Piet Rautenbach Steet Tel. +27 12 541-3211 Tel. +27 21 949-0658 Tel. +27 31 701-6078 P.O. Box
More informationMILD STEEL FLATS. Size (mm)
Page 6 MILD STEEL FLATS Product Shortname: FL W t Specifications: AS3679-300 AS3679-350 (on indent only) JIS G3101-SS400 Range Available: 13 x 3 0.31 16 x 3 0.38 16 x 6 0.75 20 x 3 0.47 20 x 5 0.79 20
More informationDatasheet. control line. e109 - September Manufacturing Range. Experience. Applications. Production Facilities
Datasheet Experience The Oil & Gas sector represents one of Fine Tubes principal markets for supply of a wide range of tubular product forms and materials. Our products have been successfully used in some
More informationDesign principles and Assumptions
Design principles and Assumptions The design and use of concrete slabs that utilise ARMOURDECK 300 in composite construction may be carried out using either: the relevant Australian and international Standards
More informationThe bonded pipe system Overview
2.0.0.1 Overview Introduction This section contains a description of the preinsulated single s which LOGSTOR offers. Contents Material specifications 2.0.1 District heating s, insulation series 1 2.0.2
More informationDesign Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables)
TF 209-R-08 Metric Design Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables) INTRODUCTION This Tech Fact* provides basic information on coldworked wire and welded
More informationWide Flange Beams for offshore structures
Wide Flange Beams for offshore structures S355 G11/G12 +M and Hi355 TZK Weldability evaluation in accordance with EN 10225 June 2012 Content Base metal characterization (Appendix 1 : certificate) Identification
More informationDelivery program for steel pipes
Delivery program for steel pipes Table of content Photo: Herrenknecht AG 1. Water-bearing steel tubes 4 EN 10255 EN 10224 2. Seamless steel tubes for pressure purposes 6 EN 10216-1 bzw. EN 10216-3 EN 10216-2
More informationCelsius 355 NH technical guide Structural hollow sections
Celsius 355 NH technical guide Structural hollow sections Contents 03 Introduction 04 echnical data 08 Size range charts 12 Sectional properties Celsius 355 Circular 16 Sectional properties Celsius 355
More informationLong products and wire rod
production prograe Long products and wire rod Mittal Steel Ostrava a.s. production prograe Long products and wire rod Mittal Steel Ostrava a.s. Mittal Steel Ostrava a.s. TRADITIONAL PRODUCER OF THE HIGH
More informationHIGH STRENGTH, ECONOMICAL AND EXCELLENT QUALITY STEEL PIPE PILES DELIVERED TO YOUR EXPECTATIONS
ESC STEEL PIPE PILES LSAW, SSAW & ERW PIPES HIGH STRENGTH, ECONOMICAL AND EXCELLENT QUALITY STEEL PIPE PILES DELIVERED TO YOUR EXPECTATIONS Pipe Piles can be utilised in a multitude of applications: such
More informationEXPORTERS OF ENG MATERIALS & FABRICATIONS
EXPORTERS OF ENG MATERIALS & FABRICATIONS Certificate of Registration This is to certify that the Quality Management System of UK Steel Exports Limited Blackvein Industrial Estate, Cross Keys, Newport,
More informationMATERIALS & STANDARDS
GLAUNACH THE SILENCER HANDBOOK MATERIALS & STANDARDS ENSURING SUISTAINABLE QUALITY AND SAFETY IN OPERATION GLAUNACH GMBH 2010 ALL RIGHTS RESERVED Part V page 2 of 7 1. SILENCER STANDARD MATERIALS All materials
More informationSTEEL WIRE ROPE HIGH CARBON WIRE COLD DRAWN STEEL BAR CHUNG WOO ROPE CO., LTD.
STEEL WIRE ROPE HIGH CARBON WIRE COLD DRAWN STEEL BAR CHUNG WOO ROPE CO., LTD. Head Office & Factory Yangsan Office & Factory, Songjungdong, Gangseogu, Busan, Korea 503, Dukgyeodong, Yangsan, Kyeongnam,
More informationDrilmax Steel Tubes. for the most demanding mining exploration drilling conditions
Drilmax Steel Tubes for the most demanding mining exploration drilling conditions Customer Benefits Drilmax steel tubes are cold drawn, heat-treated and straightened with the highest expertise to offer
More informationMANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
More informationTechnical Information Oilite
Technical information - Oilite Lubrication Standard OILITE bearings are impregnated with a highly refined mineral oil to ISO VG (SAE 30) having a high viscosity index and containing anti-oxidant, anti-rust
More informationSTEEL WIRE ROPE HIGH CARBON WIRE COLD DRAWN STEEL BAR CHUNG WOO ROPE CO., LTD.
www.cwrope.com STEEL WIRE ROPE HIGH CARBON WIRE COLD DRAWN STEEL BAR CHUNG WOO ROPE CO., LTD. Head Office & Factory 1682-4, Songjung-dong, Gangseo-gu, Busan, Korea TEL : 82-51-831-2171 FAX : 82-51-831-2174
More informationThe Amodil Group. Specialists In Stainless Steel Long Products
Specialists In Stainless Steel Long Products Specialists In Stainless Steel Long Products Round Hexagon Flat Square Angle Billet Seamless Pipe & Tube Hollow Bar Fittings Over 5,000 tonnes of Stainless
More informationPresby Steel, LLC. 143 East Milan Road Berlin, NH FAX:
143 East Milan Road 603-752-3022 FAX: 603-752-2821 1 S BEAMS (I Beams) Conforms to ASTM A36 Designation Web Depth/Inches Thickness Flange in Inches Area x Wt./Ft./Lbs. in Inches Width Thickness Sq. In.
More informationSeamless Stainless Instrumentation Tubing
Seamless Stainless Instrumentation Tubing Headline About MST Our Profile Mannesmann Stainless Tubes has one of the largest product portfolios in this sector and 125 years of history that dates back to
More informationinnerduct Innerduct INNERDUCT tidbit
innerduct Innerduct Innerduct is manufactured from High Density Polyethylene in accordance with the specifications of ASTM F-2160 and/or NEMA TC 7. Other dimensional requirements may be acceptable upon
More informationCopper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
More informationHPL Tubes. Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines
HPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines 2 HPL Tubes Hydraulic-pneumatic pressure lines Mannesmann Precision Tubes As a leading European manufacturer of cold-drawn
More informationMaterial NBR NB black
page 1 / 5 Physical properties nominal range typical values Density ASTM D 1817, 23 C Hardness ASTM D 2240, Shore A, 23 C Tensile strength ASTM D 412, 23 C Elongation at Break ASTM D 412, 23 C ASTM D 395,
More informationMultideck 80-V2 Features and Applications
Features and Applications is designed to incorporate all the advantages of the Multideck 60-V2 but in a deeper profile to provide longer spans up to 5.4m unpropped. Concrete Volume Savings Due to its unique
More informationGuideline No.: E-04(201510) E-04 GENERATORS. Issued date: October 20,2015. China Classification Society
Guideline No.: E-04(201510) E-04 GENERATORS Issued date: October 20,2015 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection
More informationMultideck 50-V2 Features and Applications
Features and Applications is a dovetail profile deck with a depth of 50mm providing spans up to 4m unpropped. Greater Design Efficiency The larger range of Multideck gauge thicknesses available allow much
More informationStructural Sections. Page 15
Page 15 MILD STEEL CHANNELS Product Shortname: CH AS 3679-300 AS 3679-350 (on indent only) BS4360-43A Mass per Metre = area of section x 0.00785 = kg/m Metres per Tonne = 1000 = metres kg/m Size (A x B)
More informationMultideck 60-V2. Contents
The original and still the most popular deck in the market is a 60mm high, structurally efficient trapezoidal profile providing an excellent composite union between steel and concrete to maximise the load
More informationComposition Fibreglass 34% - PVC 48% - PVC laminate 18% By heat, high frequency or ultrasonic welding
Serge 600 Blockout Solar - charcoal charcoal Technical info FRONT BACK Widths 300 cm Composition Fibreglass 34% - PVC 48% - PVC laminate 18% Openness factor NBN EN 410 3.00% Weight NF EN 12127 650.00 g/m²
More informationREBAR CONNECTION SYSTEM
REBAR CONNECTION SYSTEM alterations reserved Mar-17 Page 1 PRODUCTS RANGE COUPLERS PSA PSA-PSC TSE PSA-SS Page 7 Page 9 Page 9 Page 10 PSAD TSED PSAG TSEG Page 11 Page 12 Page 13 Page 14 PSAGGD PSA TRANSITION
More informationMILD STEEL PLATE (G250 & G300)
Page 24 MILD STEEL PLATE Product Shortname: PL Specifications: Size Designation: AS/NZS 1594:2002 HA250 AS/NZS 3678:2011 G250 JIS G3101:2010 SS400 AS/NZS 1594:2002 HA300 AS/NZS 3678:2011 G300 Length (m)
More informationHPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines
HPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines 2 HPL Tubes Hydraulic-pneumatic pressure lines Salzgitter Mannesmann Precision SMP-Group As a leading European manufacturer
More informationTechnical Data. Insulation for the LNG, Petrochemical and Process Industries
Technical Data Insulation for the LNG, Petrochemical and Process Industries B2 33 Nominal Density EN ISO 845 kg/m 3 33 Initial W/m. K 0.020 Aged (25 weeks @ 70 C) W/m. K 0.026 Lower Limit C -180 Cream
More informationSeamless hot rolled tubes and seamless hollow bars
Seamless hot rolled tubes and seamless hollow bars Benteler Distribution Customised steel tube solutions An internationally operating stockholding company of carbon alloy and stainless steel tubes With
More informationCopper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30)
Shipbuilding OSNA -10 and OSNA -30 Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30) KME Germany GmbH & Co. KG Shipbuilding - OSNA -10 and OSNA -30 [EN] Content KME - The Company
More informationStainless Spring Steel Strip
Stainless Spring Steel Strip Tolerances according to DIN EN ISO 9445-2:2010-06 Chart 1 (fine tolerance) or as agreed Grade No.* Grade Name Standard Tensile Strength (Rm) Comparable 1.4301 X 5 CrNi 18-10
More informationBEARINGS Plain Oilite Bushes Oil Impregnated Self-Lubricated - ISO 2795 : Metric Type, 2-12mm Bores
QM BEARINGS Plain Oilite Bushes Oil Impregnated Sel-ubricated - ISO 2795 : Metric Type, 2-12mm Bores Bore G7 Sintered oil retaining Tin Bronze. s7 QM3-2 2 5 2 0.3 2.62 QM3-3 2 5 3 0.3 2.62 QM5-3 3 5 3
More informationPLEXIGLAS Sheet Products for Aircraft Transparencies PLEXIGLAS GS 245 PLEXIGLAS GS 249. Aviation
PLEXIGLAS Sheet Products for Aircraft Transparencies PLEXIGLAS GS 245 PLEXIGLAS GS 249 Aviation Business Unit Röhm Plexiglas is the world leader in polymethyl methacrylate sheet products. Our PLEXIGLAS
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More information4.5 COMPOSITE STEEL AND CONCRETE
4.5 COMPOSITE STEEL AND CONCRETE 4.5.1 RULES OF THUMB 4.5 Composite Steel and Concrete (1/11) Typical starting point Overall concrete depth 130mm (Grade 30) Depth of profiled decking 60mm Size beam with
More informationW Straight to success
Precision brass rod W5000 - Straight to success Production from one batch We have installed a state of the art brass rod manufacturing plant for high-precision machining. All operations starting with the
More informationDIVISION: METALS SECTION: STEEL DECKING REPORT HOLDER: CONSOLIDATED SYSTEMS, INC. (CSi )
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-2839 Reissued 05/2015 This report is subject to renewal 05/2016. DIVISION: 05 00 00 METALS SECTION:
More informationORBINOX S.A. Pol. Ind. s/n ANOETA (Spain) Tel.: Fax:
GENERAL DESCRIPTION The ORBINOX model is a 4 sided sealing penstock. The gates are suitable for different types of applications with a highly versatile flow control for waste water treatment plants, irrigation,
More informationMATERIAL DATA SHEET TECHLITE LIGHT GREY ACOUSTICAL FOAM
TECHLITE Light Grey Acoustical Foam is a light-grey, open-cell foam made of melamine resin. TECHLITE is manufactured in the form of untrimmed blocks with a thin outer skin. The standard dimensions of the
More informationGuideline No.: E-04(201610) E-04 GENERATORS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-04(201610) E-04 GENERATORS Issued date: October 28,2016 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection
More informationThe FRACOF Composite Slab Test
The FRACOF Composite Slab Test Experiment, Predictions & Results Anthony Abu & Ian Burgess Fire Resistance Assessment of partially protected COmposite Floors - FRACOF Introduction To increase the use of
More informationBENTELER Distribution. Pipe solutions to the petrochemical and power generation sectors
BENTELER Distribution Pipe solutions to the petrochemical and power generation sectors About us BENTELER Distribution is an internationally operating stockholding and processing company of steel tubes
More informationVEHICLE COMPONENTS SUPPLY EXPERTS
VEHICLE COMPONENTS SUPPLY EXPERTS VEHICLE COMPONENTS We build and maintain the strong supply chain links which power the global automotive industry. API Engineering have more than 15 years of experience
More informationSERVICES. Plasma Burning Shearing Sawing To Length Pipe and Tube Cutting Bundle Sawing Galvanizing Custom Processing
PRODUCTS Beam Channel Rail Angle Flat Bar Plate Floor Plate Abrasion Resistant / Wear Plate Sheet Galvanized Sheet Round Bar Square Bar Rectangle / Square / Round Tubing Pipe Cold Roll Expanded Metal /
More informationRaw Edge Molded Cog Classical V Belts & High Power Molded Cog Wedge Belts
Raw Edge Molded Cog Classical V Belts & High Power Molded Cog Wedge Belts standards DIN 2215/DIN 7753 (Part 1) ISO 4184 BS 3790 ISO 4183 Protorque Raw Edge Molded Cog Classical V and High Power Wedge Belts
More informationRapid Lifting Anchor System. Connector Ring Clutch (t)
Rapid Lifting Anchor System The Rapid Lifting System primary purpose is to lift precast concrete with the help of its Rapid anchoring system, comprises of required dynamic load bearing anchor and required
More informationBORNEBUSCH. Non-ferrous metals. Stock list and material list for cast bronzes and other non-ferrous metals
Non-ferrous metals Stock list and material list for cast bronzes and other non-ferrous metals 30 Non-ferrous metals BORNEBUSCH Table of contents 1. Red bronze (CuSn7ZnPb) 32 1.1 Pipes 33 1.2 Round rods
More informationErmeto Original Tubes
Ermeto Original Tubes R2 General recommendations for tubes 1. Steel types, mechanical properties, conditions Steel types, mechanical properties and conditions of EO steel tubes Steel type Tensile strength
More informationBRE/TSLAB Vulcan Comparisons. Roger Plank Anthony Abu & Ian Burgess
BRE/TSLAB Vulcan Comparisons Roger Plank Anthony Abu & Ian Burgess Tensile Membrane Action Tensile Area Peripheral compression BRE Bailey Method Rigid plastic theory with large change of geometry Yield
More informationTRU-WELD Stud Welding
HEAE CONCRETE ANCHOR FU WE BASE TYPE CA STU TYPE F FERRUE SUPPIE Head (H) 1/2 for all 1/4 Headed Concrete Anchors. Head Height (HT) 3/16 for all 1/4 Headed Concrete Anchors. WE STU SPECIFICATIONS WE STU
More informationStandards Standards Standards Standards Standards Standards Standards
STEEL BILLET / BILLETTE Quality / Qualité: DIN 17100, TS 708, ASTM A 615, JISO3112 (1985) NFA 35-16 (1986) Equivalent Standarts 20 MnSi, All Desired Chemical Compositions can be met. Tous les compositions
More informationHydraulic and pneumatic lines EN Zista and Zistaplex
Cold finished seamless tubes Hydraulic and pneumatic lines EN 10305-4 Zista and Zistaplex Distribution Benteler Distribution Customised steel tube solutions An internationally operating stockholding company
More informationCat.LIN1003/EN. Precision shafts for linear motion
Cat.LIN1003/EN Precision shafts for linear motion This technical publication has been produced with a great deal of care and attention and all data has been checked for accuracy. However no liability can
More informationCOMPFIRE. Reaction Frame. Camera 3. Macalloy Bars. Camera 2. Link Bar. Support Beam. Oven Bar. Camera 1. Jack Bar.
Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack 22 September 2010 1 Oven Bar Link Bar View
More informationAPPENDIX: TECHNICAL INFORMATION
Materials Test and Operation Specifications Quality Assurance MATERIALS: Cast Iron Grey iron GD-250 GG-25 to DIN 1691-1964 Grade 220/250 minimum to BS 1452-1990 Class 35B/40B to ASTM-A48-1974 250-200 -
More informationPOLYETHYLENE High Density
POLYETHYLENE High Density PE-3408/PE-3608 ENGINEERED FOR WATER AND MINING PIPING SYSTEMS PLASTIC MANUFACTURES SINCE 1953 POLYTUBES HIGH MOLECULAR WEIGHT (HMW) High Density Polyethylene Pipe for General
More information2MHP 3MHP 5MHP 8MHP 14MHP D8MHP
Profiles: t h t h s 2MHP, 3MHP, 5MHP, 8MHP, 14MHP optibelt OMEGA HP W T Profile: D8MHP HIGH PERFORMANCE TIMING BELT MADE OF CHLOROPRENE maintenance-free, with glass-fibre tension cord 2MHP 3MHP 5MHP 8MHP
More informationNAMUR Technical details
Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered,
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationUPDATING OF THE GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION AND LABELLING OF CHEMICALS (GHS) Physical hazards
UNITED NATIONS Secretariat Distr. GENERAL ST ST/SG/AC.10/C.3/2007/11 12 April 2007 Original: ENGLISH COMMITTEE OF EXPERTS ON THE TRANSPORT OF DANGEROUS GOODS AND ON THE GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION
More informationVolume 1 Series 2200 Specification for Road Works. Clause Title Page
PARAPETS Contents Clause Title Page 2201 General... 2 2202 Vehicle... 2 2203 Anchorages and Attachment Systems for Vehicle... 2 2204 Amendments and Additions to BS 6779... 3 2205 Protection Against Corrosion...
More informationT.I. Midwood Co Ltd Green Lane Wardle Nantwich Cheshire CW5 6BJ T: +44 (0) F: +44 (0)
Features and Benefits Version 05/07/2014 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Used in non-cracked and cracked concrete Fast
More informationSEVENTH EDITION HOT ROLLED AND STRUCTURAL STEEL PRODUCTS
SEVENTH EDITION HOT ROLLED AND STRUCTURAL STEEL PRODUCTS HOT ROLLED AND STRUCTURAL STEEL PRODUCTS CONTENTS INTRODUCTION 1 TEST CERTIFICATES AND 2 CERTIFICATES OF COMPLIANCE BUILD WITH STANDARDS AND ACRS
More informationP.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
More informationNAMUR Technical details
Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free
More informationCage welding machines.
Cage welding machines www.prinzing-pfeiffer.de PP ASMS series apilion system Fully automatic machinery with wire feed exclusively from coil. The ASMS was designed for use with packerhead and other highly
More informationBUFFALO - XP. A StongFast Product. For more information call Or log on to
Features and Benefits Version: 25/09/2017 Good bond strength with High load resistance Used with all grades of threaded rod Used in concrete and masonry Fast gelling and curing Used in dry and wet conditions
More informationAbout TekMarine. Disclaimer. Copyright
Marine Fenders About TekMarine From its base in the United States, TekMarine Systems LLC designs and supplies advanced marine fendering and mooring systems to ports, harbors and waterways across the world.
More informationConductors Braids Special products made of copper wire
Conductors Braids Special products made of copper wire Content 3 Introduction 4 Earthing straps MB 5 Current leads SB 6 Connectors VB 7 Copper welding parts Copper cutting parts KST 8 Flat copper conductors
More informationBondstrand 2000M/7000M for marine 1 to 6 inch (Quick-lock joint), 8 to 40 inch (Taper/Taper joint) with external pressure requirements
Bondstrand 2000M/7000M for marine 1 to 6 inch (Quick-lock joint), 8 to 40 inch (Taper/Taper joint) with external pressure requirements Uses and applications Ballast Portable discharge line Chlorination
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 14/03/2017
Position Qty. Description 1 CR 32-3-2 A-F-A-E-HQQE Phone: 8 61 Date: 1/3/217 Product No.: 961221 Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range:
More informationPRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM
PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com
More informationCompany name: GRUNDFOS (Singapore) Pte. Ltd. Created by: Angie Ang Phone: Date: 23/03/2017
Position Qty. Description 1 CR 15-7 A-F-A-E-HQQE Date: 3/3/17 Product No.: On request Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range: -.. 1 C
More informationDESFLEX COMPACT FLANGES
DESFLEX COMPACT FLANGES DESFLEX COMPACT FLANGES The first original Compact Flange designed in full accordance with ASME ANSI PD 5500, Type Approved & Fire Tested. Offering weight savings of up to 88% when
More informationREBAR CONNECTION SYSTEM
REBAR CONNECTION SYSTEM WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW COUPLERS PSA PSA-PSC PSC-BOLT PSE Page 6 Page 6 Page 8 Page 9 TSE PSA-SS
More informationW11 series 3 rolls mechanical symmetrical rolling machine
W11 series 3 rolls mechanical symmetrical rolling machine BRIEF INTRODUCTION 1. The design meets EU international standards. The fuselage eliminates internal stress by annealing and ensures higher precision
More informationMILITARY SPECIFICATION SHEET SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A
INCH-POUND MS35307E 25 April 1997 Superseding MS35307D 1 May 1969 MILITARY SPECIFICATION SHEET SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A This specification
More informationSurface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-SR Mechanical applied electrically conductive laminate system Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates
More informationData sheet: S3 Bar and structural products Profiles, dimensions & tolerances. Introduction
Data sheet: S3 Bar and structural products Profiles, dimensions & tolerances Introduction ArcelorMittal South Africa, Vereeniging Works produces a wide variety of long and forged products. Products are
More informationACSR- ROPES Aluminium wire steel reinforced (ACSR conductor)
ACSR- ROPES Aluminium wire steel reinforced (ACSR conductor) The steel reinforced aluminium conductor consists of seven or more aluminium wires applied in concentric layers over a steel core made of one
More informationDESIGN OPTIMIZATION AND FINITE ELEMENT ANALYSIS OF PISTON USING PRO-e
Int. J. Mech. Eng. & Rob. Res. 2014 Rohit Tamrakar et al., 2014 Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 3, No. 2, April 2014 2014 IJMERR. All Rights Reserved DESIGN OPTIMIZATION AND FINITE ELEMENT
More informationKING PIN KIT T KING PIN KIT. Contents
Contents Important Information 1 Contents 3 Installation Guide 4 Torque Table CPS 8 Torque Table CPS 807 11 Terex Warranty System 12 T118052 Issue 1 - FEB 2011 Important: Familiarise yourself with the
More informationSTEEL TUBES, PIPES, COILS AND PLATES
STEEL TUBES, PIPES, COILS AND PLATES About Us Tiger Steel Industries LLC, was established in 1997 in Dubai, UAE, primarily to manufacture ERW Tubes and Pipes for the Steel and Construction industry. The
More information