Material NBR NB black
|
|
|
- Evan Fletcher
- 5 years ago
- Views:
Transcription
1 page 1 / 5 Physical properties nominal range typical values Density ASTM D 1817, 23 C Hardness ASTM D 2240, Shore A, 23 C Tensile strength ASTM D 412, 23 C Elongation at Break ASTM D 412, 23 C ASTM D 395, B, 22 h, 100 C, 25 ASTM D 395, B, 70 h, 100 C, 25 ASTM D 395, B, 168 h, 100 C, 25 DIN ISO 815, 72 h, -20 C, 25 Low temperature test ASTM D 1329, TR10 Temperature range -30 C to 100 C 1.23 ± g/cm³ 70 ±5 70 Shore MPa C Declarations of conformity ADI Free DVGW Baumusterprüfzertifikat Gas DIN EN 549 H3 B1 DVGW Baumusterprüfzertifikat Gas DIN EN 549 H3 B1 RoHS Country Part Remark Expires D not defined DIN EN 549 H3 B1 06 / 2022 D not defined english 06 / 2022 Restricted substances in electrical and electronic equipment unlimited Global Technology
2 page 2 / 5 in Air: 70h/100 C Hardness (ASTM D2240, Shore A, 23 C) Shore Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in Air: 168h/100 C Hardness (ASTM D2240, Shore A, 23 C) Shore Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in Air: 504h/100 C Hardness (ASTM D2240, Shore A, 23 C) Shore Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in Air: 24h/120 C Hardness (ASTM D2240, Shore A, 23 C) Shore Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in Air: 70h/120 C Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in Air: 70h/125 C Hardness (ASTM D2240, Shore A, 23 C) Shore Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) Global Technology
3 page 3 / 5 in ASTM-Oil No. 1: 70h/100 C Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in ASTM-Oil No. 1: 168h/100 C Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in ASTM-Oil No. 1: 70h/125 C Hardness (ASTM D2240, Shore A, 23 C) Shore Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in ASTM-Oil No. 1: 70h/150 C Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in IRM 903: 70h/100 C Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) Global Technology
4 page 4 / 5 in IRM 903: 168h/100 C Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in IRM 903: 70h/125 C Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in IRM 903: 70h/150 C Hardness (ASTM D2240, Shore A, 23 C) Shore Tensile strength (ASTM D412) MPa Elongation at Break (ASTM D412) in Water: 70h/100 C Hardness (ASTM D2240, Shore A, 23 C) Shore Global Technology
5 page 5 / 5 No ASTM D2000 properties available The given values are based on a limited number of tests on standard test pieces (2mm sheets). The data from finished parts can deviate from above values depending on the manufactories process and the component geometry. The data represents our present empirical values. It is incumbent on the person placing the order to examine whether it is suitable for its intended purpose, before using the product. All questions regarding the guarantee of this product are in line with our terms and conditions, inasmuch as statutory provisons do not plan for something else. Global Technology
Certificate of Conformity
Certificate of Conformity Our reference: Compound.: We confirm that delivered products comply with the agreements of the purchase order. We certify that the materials used to manufacture the identified
MATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers -
isovac K Electrical steel Data sheet December 2014 The specialist in individual final annealing processes Convincing advantages
Electrical steel isovac 800-65 K Data sheet December 2014 The specialist in individual final annealing processes isovac is the electrical steel made by voestalpine and stands for highest energy efficiency.
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled Base - epoxy resin - two-component Use - for the trowelling of welded seams - pasty and run-resistant but
DELO -ML DB133 anaerobic and UV-curing adhesive
DELO -ML DB133 anaerobic and UV-curing adhesive Base - Modified urethane acrylate - one-component, solvent-free - dual-curing adhesive Use - for impact-resistant metal bondings - for mixed bondings with
PSI FLANGE ISOLATION KITS
PSI LANGE ISOLATION KITS GLV-UNISEAL T GLV-UNISEAL GGR EASY INSTALLATION AND MAINTENANCE REE PERMANENTLY ELASTIC OVER THE ENTIRE SERVICE LIE HIGH STRESS RESISTANT O LOAD GASKET WWW.PSI-PRODUCTS.COM 177
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled Base - epoxy resin - two-component Use - high-strength construction adhesive - multi-purpose - the cured
Surface Protective Systems
Surface Protective Systems Technical information Oxydur UP 410 Laminate TI 216 Laminate system for concrete and steel substrates Base Polyester resin, unsaturated Material Group Membranes Tank- / vessel
isovac A Electrical steel Data sheet February 2015 The specialist in direct application Convincing advantages
Electrical steel isovac 470-65 A Data sheet February 2015 The specialist in direct application isovac is the electrical steel made by voestalpine and stands for highest energy efficiency. With its excellent
Texin 245 Covestro PUR Thermoplastic Polyurethane Elastomer (Polyester) Action Saturday, October 22, 2016 Units English Legend (Open) General Information Product Description Texin 245 resin is an aromatic
Components: Dimensions / Order Codes
Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide
Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
isovac A The perfect solution for direct application
Data sheet isovac 250-35 A page 1/7 01/2018 Electrical Steel Fully processed Data sheet isovac 250-35 A page 1/7 01/2018 isovac 250-35 A The perfect solution for direct application Manufactured in the
isovac A The perfect solution for direct application
Data sheet isovac 330-50 A page 1/7 01/2018 Electrical Steel Fully processed Data sheet isovac 330-50 A page 1/7 01/2018 isovac 330-50 A The perfect solution for direct application Manufactured in the
isovac A The perfect solution for direct application
Data sheet isovac 270-50 A page 1/7 01/2018 Electrical Steel Fully processed Data sheet isovac 270-50 A page 1/7 01/2018 isovac 270-50 A The perfect solution for direct application Manufactured in the
Reinforcing steel bars
Reinforcing steel bars 6 The Company produces the reinforcing rolled steel according to the international and national standards: DSTU 3760:2006 (Ukraine) GOST 5781-82 (international standard) GOST 10884-94
isovac high-perm NO30-15
Electrical steel isovac high-perm NO30-15 Data sheet April 2016 The specialist for the automotive industry isovac is the electrical steel made by voestalpine and stands for highest energy efficiency. With
isovac A HC The specialist with high thermal conductivity
Data sheet isovac 330-50 A C page 1/7 01/2018 Electrical Steel Fully processed Data sheet isovac 330-50 A C page 1/7 01/2018 isovac 330-50 A C The specialist with high thermal conductivity Manufactured
isovac A HC The specialist with high thermal conductivity
Data sheet isovac 400-65 A C page 1/6 01/2018 Electrical Steel Fully processed Data sheet isovac 400-65 A C page 1/6 01/2018 isovac 400-65 A C The specialist with high thermal conductivity Manufactured
Surface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-SR Mechanical applied electrically conductive laminate system Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy Category : Polymer, Thermoplastic Material Notes: Main Characteristics: Low Creep; Low moisture absorption; Flame retardant; Low impurity ions; Good machinability;
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
INCH-POUND MIL-DTL-23053/1C 17 June 1996 SUPERSEDING MIL-I-23053/1B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
Product Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
isovac high-perm A
Data sheet isovac P 400-65 A page 1/6 01/2018 Electrical Steel Fully processed Data sheet isovac P 400-65 A page 1/6 01/2018 isovac high-perm 400-65 A The specialist with the highest permeability Manufactured
DELO-DUOPOX AB8390 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled
DELO-DUOPOX AB839 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled Base - epoxy resin - two-component, thixotropic Use - high-strength construction adhesive - multi-purpose
isovac A HF The specialist for high frequencies
Data sheet isovac 330-35 A F page 1/7 01/2018 Electrical Steel Fully processed Data sheet isovac 330-35 A F page 1/7 01/2018 isovac 330-35 A F The specialist for high frequencies Manufactured in the most
PE-HDXc pipes (physically cross-linked polyethylene pipes)
pipes (physically cross-linked polyethylene pipes) Applications: Domestic drinking water installations, radiator connections and surface regulation Special properties high chemical resistance (according
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit 71 I Fuse 105 Electrofusion Processor The IntegriFuse I Fuse 105 Electrofusion Processor is the next generation
PUR-O-STOP FS-L. General Building Inspectorate Approval for curtain grouting CE-marking in accordance with EN
Technical Data Sheet Issue: 20-02-2017 PUR-O-STOP FS-L General Building Inspectorate Approval for curtain grouting CE-marking in accordance with EN 1504-5 Properties: PUR-O-STOP FS-L is a slow-hardening,
Surface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-U Laminate system for concrete and steel substrates Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates Description
NEW AND EXTREME HIGH QUALITY CABLE GUARDS RED LINE USE WITH HIGH VOLUME VEHICULAR TRAFFIC
NEW AND EXTREME HIGH QUALITY CABLE GUARDS MANUFACTURED IN UK RED LINE USE WITH HIGH VOLUME VEHICULAR TRAFFIC BLACK LINE USE WITH LOW VOLUME VEHICULAR AND ALL PEDESTRIAN TRAFFIC RED FLOOR 3 SLOT AND 5 SLOT
DELO -PUR 9691 Multi-purpose 2c polyurethane, cures at room temperature, medium-viscous, filled
DELO -PUR 9691 Multi-purpose 2c polyurethane, cures at room temperature, medium-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED
INCH-POUND 17 June 1996 SUPERSEDING MIL-I-23053/11B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED This specification
isovac K HE The specialist for shorter final annealing times
Data sheet isovac 450-50 K E page 1/7 01/2018 Electrical Steel Semi-processed Data sheet isovac 450-50 K E page 1/7 01/2018 isovac 450-50 K E The specialist for shorter final annealing times Production
DATA SHEET OF COMPASHIELD EE GASKET
DATA SHEET OF COMPASHIELD EE GASKET Introduction Compashield EE gaskets developed by Nolato is extruded in parallel with dual conductive/non-conductive gaskets, provide both optimum EMI and environmental
isovac high-perm A
Electrical steel isovac high-perm 310-50 A Data sheet February 2015 The specialist with the highest permeability isovac is the electrical steel made by voestalpine and stands for highest energy efficiency.
TECHNYL A 218 BLACK 21N
TECHNYL A 218 BLACK 21N Description TECHNYL A 218 Black 21 N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding.it is available in black color. Key Properties Chemical
MIL- DTL D TY 2 - Compressed Sheet with Aramid Fibers/SBR Binder
MIL- DTL- 24696D TY 2 - Compressed Sheet with Aramid Fibers/SBR Binder CONSTRUCTION MIL- DTL- 24696D TY 2 is a compressed non- asbestos sheet gasket material produced from a combination of Aramid Fiber,
RUBBERTITE. Technical Data Sheet Issue:
Technical Data Sheet Issue: 17-05-2018 RUBBERTITE General Building Inspectorate Approval for curtain grouting General Building Inspectorate Approval for crack injection CE-marking in accordance with EN
ACSR- ROPES Aluminium wire steel reinforced (ACSR conductor)
ACSR- ROPES Aluminium wire steel reinforced (ACSR conductor) The steel reinforced aluminium conductor consists of seven or more aluminium wires applied in concentric layers over a steel core made of one
Neopolen P 9230 ESD. Bulk density 1) Average Average Color 2) particle size particle weight [ kg/m 3 ] [ mm ] [ mg ]
![Neopolen P 9230 ESD. Bulk density 1) Average Average Color 2) particle size particle weight [ kg/m 3 ] [ mm ] [ mg ]](/thumbs/79/79967115.jpg "Neopolen P 9230 ESD. Bulk density 1) Average Average Color 2) particle size particle weight [ kg/m 3 ] [ mm ] [ mg ]")
= registered trademark of BASF SE Neopolen P 9230 ESD Product Description Neopolen P 9230 ESD is expanded Polypropylene supplied in the form of beads. The cells are largely closed. Table 1: Bulk density
FABRIC-RUBBER CONVEYOR BELTS, GENERAL PURPOSE
FABRICRUBBER CONVEYOR BELTS, GENERAL PURPOSE APPLICATION Rubber fabric conveyor belts for general purpose are used for transport of loose materials where particular requirements towards working conditions
Pneumatic Seals 1/2 Pneumatic Seals 2/2. Pneumatic Seals
Seals Seals * 1 Mpa = 10 Bar 1 Bar = 14.5 psi 1 Mpa = 145 psi Combination Wiper/Rod Seal This pneumatic rod seal/wiper Set profile is fitted into housings with a circlip recess according DIN 7993 (type
Low wear on all shafts: The Marathon Runner iglidur W300
iglidur Low wear on all shafts: The Marathon Runner iglidur Over 400 sizes available from stock For especially long service life Low coefficient of friction Extremely high wear resistance Also suitable
Stainless Spring Steel Strip
Stainless Spring Steel Strip Tolerances according to DIN EN ISO 9445-2:2010-06 Chart 1 (fine tolerance) or as agreed Grade No.* Grade Name Standard Tensile Strength (Rm) Comparable 1.4301 X 5 CrNi 18-10
PRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH
PRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH INDEX 01. HOT ROLLED REINFORCING BARS PAGE 4 02. WIRE ROD PAGE 6 03. BILLET FROM CONTINUOUS CASTING PAGE 8
Electrically Conductive Elastomer
Electrically Conductive Elastomer Product Overview Uvox conductive elastomers offer excellent shielding and environmental sealing. Conductive compounds can be extruded into various shapes and sizes. These
POLYETHYLENE High Density
POLYETHYLENE High Density PE-3408/PE-3608 ENGINEERED FOR WATER AND MINING PIPING SYSTEMS PLASTIC MANUFACTURES SINCE 1953 POLYTUBES HIGH MOLECULAR WEIGHT (HMW) High Density Polyethylene Pipe for General
iglidur J The Fast and Slow Motion Specialist
iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and
Low friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
Test Report. CHTC JIAHUA NONWOVEN CO.,LTD No.99,WaGou New Village, Pengchang,Xiantao,Hubei, CHINA
Test Report Order No.: 832/2 Page of 6 Client : CHTC JIAHUA NONWOVEN CO.,LTD No.99,WaGou New Village, Pengchang,Xiantao,Hubei, CHINA Date of order: 5 May 28 Receipt of sample material: May 28 Origin of
GASKETS. From compound asbestos free and PTFE sheets, our sealing solutions. INDEX OF GASKETS
GASKETS From compound asbestos free and PTFE sheets, our sealing solutions. COMPRESSED SYNTHETIC FIBRE JOINTING SHEETS Seal X offers a number of asbestos free synthetic fibre jointing sheets designed for
novapress Elastomer-bonded fibre gaskets.
novapress Elastomer-bonded fibre gaskets. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS novapress production and quality Quality monitored and maintained by using a process control
Pipeline Accessories. Flange Isolation Gaskets 4 pipes
Pipeline Accessories Flange Isolation Gaskets 4 pipes Flange Isolation Gaskets 4 pipes Combi-Seal G and Combi-Seal TW High quality flange gasket and electrical isolation point Flange Isolation Gasket TA
EPOXY RESIN MEDIUM VOLTAGE INSULATORS
Indoor epoxy resin Raw material Aromatic epoxy resin, hardened with dicarboxylic acid anhydrides filled with silanised silica Tensile strength 79,28 /mm² ISO R 527 Flexural strength 102,45 /mm² ISO R 178
Chenguang Fluoroelastomer
Technical Information Chenguang Fluoroelastomer Precompound CG A60C Features and Benefits Composition Characters Process Targets Curatives Di-polymer of VDF and HFP, with incorporated curative Broad MWD,
novaflon PTFE gaskets for industrial applications.
novaflon PTFE gaskets for industrial applications. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS At a glance: the benefits of novaflon novaflon combines decisive advantages over
novapress 850 Extreme adaptability. High fault tolerance. Maximum sealing performance.
novapress 850 Extreme adaptability. High fault tolerance. Maximum sealing performance. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS A quantum leap in tightness Maximum sealing performance
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 05-07-2016 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
Fluid Sealing Association
Fluid Sealing Association STANDARD FSA-DSJ-401-09 SPECIFICATION FOR HIGH TEMPERATURE AND ACID RESISTANT TERPOLYMER FLUOROELASTOMER REVISED OCTOBER, 2009 994 Old Eagle School Road, Suite 1019 Wayne, Pennsylvania
novaflon PTFE gaskets for industrial applications.
novaflon PTFE gaskets for industrial applications. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS At a glance: the benefits of novaflon novaflon combines decisive advantages over
iglidur G The General Purpose Bearing
iglidur The eneral Purpose Bearing Most popular iglidur material worldwide. iglidur bearings cover an extremely wide range of different requirements they are truly all round. Typical applications cover
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED
INCH-POUND MIL-DTL-23053/5C 17 June 1996 SUPERSEDING MIL-I-23053/5B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED This specification
AFM 37 AFM 37 Technical Data Sheet 337 (previously TDS 270) Material AFM 37 Properties AFM 37 Application Surfaces AFM 37 Approvals DIN- DVGW
AFM 37 AFM 37 Technical Data Sheet 337 (previously TDS 270) Edition: 05/2012, supersedes all prior editions. Please see the latest issue at www.reinz.com/ datasheet Material Properties Application Surfaces
innerduct Innerduct INNERDUCT tidbit
innerduct Innerduct Innerduct is manufactured from High Density Polyethylene in accordance with the specifications of ASTM F-2160 and/or NEMA TC 7. Other dimensional requirements may be acceptable upon
Faurecia Interior Systems India Pvt. Ltd., Test Laboratory, Plot No. T-187, Pimpri Industrial Area (B. G. Block), Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. AUTOMOTIVE COMPONENTS 1. Component Testing (Rubber & Plastic Products) a. (Plastics/Fabric/ Soiling & Cleanability Ford FLTM BN 112-08: 2010 Daimler DBL 5399: 2007 General
3 TM Cold Applied Barrier Boot System
M Technical Information : Barrier Boot TM Cold Applied Barrier Boot System For rated voltages 6.5/11(12) kv and 8.7/15(17.5) kv 92-EE 717-1 Product Description The Cold Applied Barrier Boot System consist
Halogen Free, Flame-retardant Polyether based TPU
STANDARD COLORS CMX Cable Markers Halogen Free, Flame-retardant Polyether based TPU TECHNICAL DATA SHEET Revision Number. 1 Last Edited 11. marts 2019 OTHER COLORS MATERIAL halogen free, flame retarded
ZHPCG CK0226 POWER CABLE WIRE & CABLE
ZHPCG CK0226 POWER CABLE WIRE & CABLE ZHPCG CK0226 POWER CABLE WIRE & CABLE Application/Use Rail approved zero Halogen Power Cables, available as 750V or 1800V rated. ZHPCG cables are all Halogen free,
YELLOWSTRIPE 8300 BIMODAL HDPE PIPE DATA SHEET
PerformancePipe.com YELLOWSTRIPE 8300 BIMODAL HDPE PIPE DATA SHEET Yellowstripe 8300 Pipe meets or exceeds: ASTM D2513 CAN/CSA-B137.4 UPC ASTM D3350, cell classification PE445574C and PE445576C PPI TR-4
contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
acc. to DIN 3535, part 6 FA VP 401 Gaskets with higher thermal resistance
AFM 30 AFM 30 Technical Data Sheet 330 (previously TDS 270) Edition: 05/2012, supersedes all prior editions. Please see the latest issue at www.reinz.com/ datasheet Material Properties Application Surfaces
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
iglidur G The General Purpose Bearing: most popular iglidur material worldwide
Standards Wide Range from Stock polymer bearings G The General Purpose Bearing: most popular material worldwide from page 51 J The Fast and Slow Motion Specialist: used in long-life applications, also
KLINGER soft-chem. Benefits: Key features: Certificates and approvals: Properties: Industries:
KLINGER soft-chem KLINGER soft-chem brings the sealing technology on a new level and it is the best choice for operating conditions up to 260 C. Multi-directional expanded PTFE Excellent corrosion resistance
Caledonian Submersible Pump Cables for Oil Industry >> IEEE 1018 >> IEEE 1019 >> API RP 11S5
Caledonian Submersible Pump Cables for Oil Industry >> IEEE 1018 >> IEEE 1019 >> API RP 11S5 Caledonian Windmill Cables COMPANY PROFILE Table of Content Caledonian, established in 1978, offers one of the
Fluid Sealing Association
Fluid Sealing Association STANDARD FSA-DSJ-401-07 SPECIFICATION FOR HIGH TEMPERATURE AND ACID RESISTANT TERPOLYMER FLUOROELASTOMER REVISED JULY, 2007 This is an editorial revision only. The standard currently
P.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
A-700. Technical Information. Fluoroelastomers
A-700 Technical Information Introduction Viton A-700* is an A-family gum polymer that has demonstrated easy processing. This gum provides: Good flow for compression molding Good mold release Less mold
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
APPENDIX: TECHNICAL INFORMATION
Materials Test and Operation Specifications Quality Assurance MATERIALS: Cast Iron Grey iron GD-250 GG-25 to DIN 1691-1964 Grade 220/250 minimum to BS 1452-1990 Class 35B/40B to ASTM-A48-1974 250-200 -
procesna oprema KLINGER tesnila za visoke temperature High Temperature
procesna oprema KLINGER tesnila za visoke temperature High Temperature HIGH TEMPERATURE GASKET MATERIALS Introduction High temperature sealing applications, such as those in waste gas and engine operations,
Requirements for IC Engine Coolant Hoses
AUTOMOTIVE INDUSTRY STANDARD Requirements for IC Engine Coolant Hoses PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B.NO.832, PUNE 411 004 ON BEHALF OF AUTOMOTIVE INDUSTRY STANDARDS COMMITTEE
Wiring Duct T1 Series - Slotted
Duct T1 Series - Slotted UL file E123572 T1 Series Gray Open Slot Rigid PVC (including cover) Catalog Standard Carton Package Quantity Price Catalog Single Piece Pkg Package Quantity Price T1-0506G 20
ANEMO SCREWS TITANIUM
BOLTS NUTS WASHERS STUDS SREWS ANEMO SCREWS TITANIUM MATERIALS : TITANIUM ALUMINIUM STAINLESS STEEL 1 INDEX STANDARD DIN The AES products can be order according to Din number or the affiliated ISO / UNI
Delivery program for steel pipes
Delivery program for steel pipes Table of content Photo: Herrenknecht AG 1. Water-bearing steel tubes 4 EN 10255 EN 10224 2. Seamless steel tubes for pressure purposes 6 EN 10216-1 bzw. EN 10216-3 EN 10216-2
T.I. Midwood Co Ltd Green Lane Wardle Nantwich Cheshire CW5 6BJ T: +44 (0) F: +44 (0)
Features and Benefits Version 05/07/2014 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Used in non-cracked and cracked concrete Fast
Combi-Seal Flange Isolation Gaskets 4 pipes
Combi-Seal lange Isolation Gaskets 4 pipes Pipeline Accessories lange Isolating Technology 4 pipes Isolating flange gaskets 4 pipes are especially designed for: Carbon steel Stainless steel Contact Corrosion
JIS. Inner tubes for automobile tires JIS D 4231: 1995 JAPANESE INDUSTRIAL STANDARD JIS D 4231:1995
JIS JAPANESE INDUSTRIAL JIS D 4231: 1995 STANDARD Translated and Published by Japanese Standards Association Inner tubes for automobile tires UDC 629.113.012.554 JIS D 4231: 1995 (E) www.chinesestandard.net
ÍNDICE FICHAS TÉCNICAS
S BBES ÍNDICE S TÉCNICAS AFLAS-B85 EPDM-B85 EPDM-85-KTW EPDM-W85-FDA FPM-B85 FPM-B85-GD FPM-B85 FPM-B85-FDA HNB-B85 HNB-B85-GD HNB-B85-GD-LT NB-B85 NB-W85-FDA SILICONE-B85-FDA SILICONE-85-FDA 3 4 5 6 7
EC type-examination of SITEMA Safety Brakes by DGUV Test
EC type-examination of SITEMA Safety Brakes by DGUV Test After thorough examination, the testing and certification body of the DGUV (German Statutory Accident Insurance) has issued the EC type-examination
Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
Premium Heavy Duty Conveyor Belt 3ply 600# 3/8 x 1/8 RMA Grade 1 Part Numbers: BCON600/3-6242
Conveyor Belt Premium Heavy Duty Conveyor Belt 3ply 600# 3/8 x 1/8 RMA Grade 1 Part Numbers: BCON600/3-6242 Polyester/Nylon EP350 x 3PLY Total Belt Gauge (inch) 0.713 Belt Weight (lbs/sq. ft.) Approx 4.3
BLUE ULTRA Pipe & Tubing contains no regrind resin in its manufacture
BLUE ULTRA is extruded using current state of the art 100% pure PE4710 virgin resin with decades of successful history - no extra wall thickness is required to retain its extreme level of UV protection
Crastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested