Pneumatic Seals 1/2 Pneumatic Seals 2/2. Pneumatic Seals
|
|
|
- Aubrie Charles
- 5 years ago
- Views:
Transcription
1 Seals Seals * 1 Mpa = 10 Bar 1 Bar = 14.5 psi 1 Mpa = 145 psi Combination Wiper/Rod Seal This pneumatic rod seal/wiper Set profile is fitted into housings with a circlip recess according DIN 7993 (type B). The seal/wiper element is mounted and retained by the circlip. Care should be taken that neither scraper nor sealing lips are damaged by sharp edges. Exchanging the rod seal/ wiper Set profile without removing the piston rod is possible if a recess is provide. Working Temperature : -10 C ~ +150 C ( PAGE 21 ) Low Friction Piston Seal Compact type of both sides pressure. Exclusively for pistons. Compared with O-Rings, superior characteristics of friction and cross section design so that they can restrain from causing rolling and twisting. Working Temperature : -20 C ~ +200 C Working Pressure : 1.0 Mpa ( PAGE 27 ) Combination Wiper/Rod Seal This seal is used for preventing entry of dust, and protecting the whole equipment. The double-lip design of TPU material could provide the double-sealing function, and keep the lubrication film under stable. The proportion is small, and easily to be dis/assemble. Material : ESTER TPU Working Temperature : -40 C ~ +80 C ( PAGE 22 ) Damper Seal These pneumatic cushioning seals profile PP are easily snapped into the groove, which should be free of all contaminants before installation. Care should be taken that the ealing lips are not damaged by sharp edges during installation. Initial lubrication is essential for a long service life. Working Temperature : -20 C ~ +200 C Working Pressure : 1.0 Mpa ( PAGE ) Double Lip Rod Wiper This seal is used for preventing entry of dust, and protecting the whole cylinder. It could provide the double-sealing function, and keep the lubrication film under stable. Combination Wiper/Rod Seal The profile is assembled into a housing designed with a circlip groove as DIN 7993 (type B). It is retained by the rounded outside diameter which makes it easy to snap into the groove. Remove all sharp corners to avoid damaging the lips of the scraper and the seal during assembly. Asymmetrical Rod Seal Laying stress on wear proof. Exclusively for small diameter cylinders. Compared with O-Rings, superior durability and characteristics of friction. ( PAGE 23 ) Material : ESTER TPU ( PAGE 24 ) Working Temperature : -10 C ~ +150 C Working Pressure : 1.0 Mpa ( PAGE 25 ) Low Friction Symmetrical Piston/Rod U-Cup Seal Packings for both pistons and rods of pneumatic cylinders. Avoid using this packing for lubricative cylinder because it is used exclusively for nonlubrication. Low Friction Symmetrical Piston/Rod U-Cup Seal Packings for both pistons and rods of pneumatic cylinders. Avoid using this packing for lubricative cylinder because it is used exclusively for nonlubrication. Working Temperature : -20 C ~ +200 C Working Pressure : 1.0 Mpa ( PAGE 30 ) Working Temperature : -10 C ~ +150 C Working Pressure : 0.8 Mpa ( PAGE 31 ) U-Cup Piston Seal The seal is a compact u-cup with asymmetrical profile and special pneumatic sealing edge on the dynamic sealing lip. The asymmetric profile with the longer and thicker static sealing lip guarantees a secure seat in the groove base. The special pneumatic sealing edge provides a very good seal with low friction and maintains an effective lubrication film. Working Temperature : -20 C ~ +80 C Working Temperature : -20 C ~ +200 C ( PAGE 26 ) 2 GMORS Hydraulic and Seals Seals 1/2 Seals 2/2 GMORS Hydraulic and Seals 3
2 Material Application List Material :Best :Suitable X:Not Recommended -:No Data NBR NBR HNBR FKM TPU Thermoplastic Urethane N7026AA N7028AA N7539AA N7626AA N8039AA N8590AA N8594AA N9026AA N9076AA H7000AA H9018AA V7559AA V7029AA V7514AA V8031AE V9059AA KC9010AC KC9502AA (AG/AW/BL) Shore A Environment Temp. C -55~100-30~120-35~80-55~100-40~100-40~100-35~80-55~100-50~100-45~135-40~135-25~200-10~150-20~200-10~150-10~150-40~80-35~ C +100 C 0 C -50 C Tensile Strength PSI (Mpa) 2453 (16.92) 3066 (21.1) 3306 (22.8) 2563 (17.68) 2934 (20.23) 3032 (20.8) 3008 (20.7) 2693 (18.6) 2480 (17.1) 3729 (25.7) 3513 (24.23) 2428 (16.6) 2044 (14.1) 2214 (15.3) 2282 (15.74) 2422 (16.7) 6625 (45) 7252 (50) Elongation% % Modulus psi (Mpa) 619 (4.27) 487 (3.4) 834 (5.8) 998 (6.88) 801 (5.52) 1968 (13.6) 2584 (17.8) 1945 (13.4) Comon Hydraulic oil Low-Temp Hydraulic Oil Coolant(Water + GLYCOL) X X Engine oil Lubricant - - Silicone Lubricant Silicone oil Chlorine Cutting Fluid X X X X X X X X X X X X X Sulfurized Cutting Fluid - - Water Soluble Cutting Fluid - - Fuel Water O 3 X X X X X X X X X (11.5) 780 (5.4) 2688 (18.54) 1310 (9.0) 939 (6.48) 740 (5.1) 1540 (10.62) 1812 (12.5) 1036 (7.1) 2216 (15.2) Function Low-Temp, Oil and Compression Set, of and oil, Suit to X-ing Special Compound, Self- Lubrication, low friction, of Oil, Suit to Dynamic Parts UB3,UB5 Low-Temp, Oil and Special Compound, Self- Lubrication, low friction, of Oil, Suit to Dynamic Parts UB3,UB5 of Low-Temp and stike, Cushion Only High-Tempt, of Oil and, CUSION and UC6 Only Low-Temp, Oil and Compression Set, High Hardness, of. of Low-Temp of High-Temp, Oil and Water Self- Lubrication, low friction, of High-Temp, Oil and Water High-Temp and Oil, of High-Temp, Tearing and Oil, Suit to X-ring High-Temp and Oil, of High-Temp and Oil, UA6 Only High-Temp, Oil and.suit to Dynamic Parts Extremely High Elongation, Excellent of. of Water Extremely High Elongation, Excellent of. of Water, Extremely High Hardness 4 Hydraulic and Seals GMORS Material Application List 1/2 GMORS Material Application List 2/2 Hydraulic and Seals 5
3 UA6 Series Combination Rod Seal UA7 Series Combination Rod Seal POLYCAPROLACTONE TPU 90 PHYSICAL PROPERTIES Working Pressure: 1.6 Mpa Hardness 90 Shore A DIN53505 Working Temperature: -40 C ~ +80 C 90 Shore A ASTM D2240 FKM/ FPM 80 PHYSICAL PROPERTIES Working Pressure: 1.6 Mpa Hardness 80 Shore A DIN53505 Working Temperature: -10 C ~ +150 C 80 Shore A ASTM D2240 Tensile Strength Mpa DIN psi ASTM D-412 Compression Set 8.1% DIN53517 Elongation 154 % DIN C 8.1% ASTM D % ASTM D-412 Standard Compound V8031AE Green Tensile Strength 45 Mpa DIN psi ASTM D-412 Compression Set 19% DIN53517 Elongation 460 % DIN C 19% ASTM D % ASTM D-412 Specific gravity 1.15 g/cm 3 DIN53479 Tear Strength 156 N/mm DIN g/cm 3 ASTM D pli ASTM D-624 Standard Compound KC9010AC Brown CODE d (mm) D (mm) H (mm) a D1 L All the tools for UA6 are completed. CODE d (mm) D (mm) H (mm) Da La Lb R x y w s UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA UA *Includes the Retaining Ring Material: SUS 304 UA UA UA UA UA GMORS Hydraulic and Seals UA6-1/1 UA7-1/1 GMORS Hydraulic and Seals 7
4 UA25 Series Double Lip Rod Wiper UB1 Series Combination Rod Seal NBR 80 PHYSICAL PROPERTIES ESTER TPU 95 PHYSICAL PROPERTIES Working Pressure: 1.6 Mpa Hardness 80 Shore A DIN53505 Working Temperature: -35 C ~ +80 C 80 Shore A ASTM D2240 Tensile Strength Mpa DIN psi ASTM D-412 Compression Set 8% DIN53517 Elongation 285 % DIN C 8% ASTM D % ASTM D-412 Standard Compound N8039AA Working Pressure: 1.6 Mpa Hardness 95 Shore A DIN Shore A ASTM D2240 Tensile Strength 50 Mpa DIN psi ASTM D mm 3 DIN53516 Elongation 515 % DIN53504 Compression Set 27.5% DIN % ASTM D C 27.5% ASTM D-395 Tear Strength 140 N/mm DIN53515 Specific gravity 1.18 g/cm 3 DIN pli ASTM D g/cm 3 ASTM D-972 Standard Compound KC9502AN / KC9502AG All the tools for UA25 are completed. Gray / Green CODE d (mm) D (mm) H t UA UA UA UA UA UA UA UA UA UA UA UA UA UA All the tools for UB1 are completed. CODE d (mm) D (mm) H (mm) Da La Lb R s UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB UB GMORS Hydraulic and Seals UA25-1/1 UB1-1/1 GMORS Hydraulic and Seals 9
5 UB3 Series Asymmetrical Rod Seal UC3 Series U-Cup Piston Seal FKM/FPM 75 PHYSICAL PROPERTIES Working Pressure: 1.0 Mpa Working Temperature: -10 C ~ +150 C NBR 75 PHYSICAL PROPERTIES Working Pressue: 1.0 Mpa Tensile Strength 15.3 Mpa DIN53504 Tensile Strength 22.8 Mpa DIN psi ASTM D psi ASTM D-412 Elongation 214 % DIN53504 Elongation 320 % DIN53504 Compression Set 8.6 % DIN53517 Compression Set 10.9 % DIN C 8.6 % ASTM D C 10.9 % ASTM D-395 Standard Compound N7539AA CODE d (mm) D (mm) H H1 UB UB UB UB UB UB UB UB UB FKM/FPM 75 PHYSICAL PROPERTIES Working Pressure: 1.6 Mpa Working Temperature: -20 C ~ +200 C Tensile Strength 15.3 Mpa DIN psi ASTM D-412 Elongation 241 % DIN53504 Compression Set 9 % DIN C 9 % ASTM D-395 Standard Compound V7514AA CODE d (mm) D (mm) H (mm) L da UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC NBR 75 / 85 PHYSICAL PROPERTIES Working Pressure: 1.0 Mpa / 1.6 Mpa Hardness 75 / 85 Shore A DIN53505 Tensile Strength 22.8 / 20.7 Mpa DIN / 3008 psi ASTM D-412 Elongation 320 / 130 % DIN53504 Compression Set 10.9 / 4.9 % DIN C 10.9 / 4.9 % ASTM D-395 Standard Compound N7539AA / N8594AA CODE d (mm) D (mm) H (mm) L da UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC GMORS Hydraulic and Seals UB3-1/1 UC3-1/1 GMORS Hydraulic and Seals 11
6 UC7 Series Low Friction Piston Seal UE1 Series Damper Seal FKM/FPM 75 PHYSICAL PROPERTIES Working Pressure: 1.0 Mpa Working Temperature: -20 C ~ +200 C Tensile Strength 15.3 Mpa DIN psi ASTM D-412 Elongation 241 % DIN53504 Compression Set 9 % DIN C 9 % ASTM D-395 Standard Compound V7514AA All the tools for UC7 are completed. CODE d (mm) D (mm) H (mm) L Da UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC UC NBR 75 PHYSICAL PROPERTIES Working Pressue: 1.0 Mpa Tensile Strength 22.8 Mpa DIN psi ASTM D-412 Elongation 320 % DIN53504 Compression Set 10.9 % DIN C 10.9 % ASTM D-395 Standard Compound N7539AA CODE d (mm) D (mm) H (mm) L Da UC UC UC UC UC UC UC UC UC UC UC UC UC FKM/FPM 90 PHYSICAL PROPERTIES Working Pressure: 1.0 Mpa Working Temperature: -20 C ~ +200 C NBR 85 PHYSICAL PROPERTIES Working Pressure: 1.0 Mpa Hardness 90 Shore A DIN53505 Hardness 85 Shore A DIN53505 Tensile Strength 16.7 Mpa DIN53504 Tensile Strength 20.7 Mpa DIN psi ASTM D psi ASTM D-412 Elongation 139 % DIN53504 Elongation 130 % DIN53504 Compression Set 16.7 % DIN53517 Compression Set 4.9 % DIN C 16.7 % ASTM D C 4.9 % ASTM D-395 Standard Compound V9059AA Standard Compound N8594AA All the tools for UE1 are completed. CODE d (mm) D (mm) Ha Hb Da Db Dc L UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE GMORS Hydraulic and Seals UC7-1/1 UE1-1/2 GMORS Hydraulic and Seals 13
7 UE1 Series Damper Seal UF5 Series Low Friction Symmetrical Piston/ Rod U-Cup Seal CODE d (mm) D (mm) Ha Hb Da Db Dc L UE UE UE UE UE UE UE UE FKM/FPM 75 PHYSICAL PROPERTIES Working Pressue: 1.0 Mpa Working Temperature: -25 C ~ +200 C Tensile Strength 16.6 Mpa DIN psi ASTM D-412 Elongation 185 % DIN53504 Compression Set 9.5 % DIN C 9.5 % ASTM D-395 Standard Compound V7559AA NBR 75 PHYSICAL PROPERTIES Working Pressue: 1.0 Mpa Tensile Strength 22.8 Mpa DIN psi ASTM D-412 Elongation 320 % DIN53504 Compression Set 10.9 % DIN C 10.9 % ASTM D-395 Standard Compound N7539AA CODE d (mm) D (mm) H (mm) L da UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF CODE d (mm) D (mm) H (mm) L da UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF GMORS Hydraulic and Seals UE1-2/2 UF5-1/1 GMORS Hydraulic and Seals 15
8 UF6 Series Low Friction Symmetrical Piston/ Rod U-Cup Seal FKM/FPM 70 PHYSICAL PROPERTIES Working Pressure: 0.8 Mpa Working Temperature: -10 C ~ +150 C Hardness 70 Shore A DIN53505 Tensile Strength 14.1 Mpa DIN psi ASTM D-412 Elongation 231 % DIN53504 Compression Set 8.1 % DIN C 8.1 % ASTM D-395 Standard Compound V7029AA NBR 75 PHYSICAL PROPERTIES Working Pressure: 0.8 Mpa Tensile Strength 22.8 Mpa DIN psi ASTM D-412 Elongation 320 % DIN53504 Compression Set 10.9 % DIN C 10.9 % ASTM D-395 Standard Compound N7539AA All the tools for UF6 are completed. CODE d (mm) D (mm) H H1 UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF UF GMORS Hydraulic and Seals UF6-1/1
Seals On Demand engineered, machined, delivered.
SEALS ON EMAN Seals On emand engineered, machined, delivered. Hercules Seals On emand offers you a wide selection of custom, cost-effective sealing solutions, using advanced rapid-prototype technology.
no adhesion effect on sliding surface, even after a long standstill superior performance over a wide range of temperatures and hydraulic fluids
Industrial Seal Inc. offers a wide range of hydraulic and pneumatic Piston seal profiles to meet the broad demands of the fluid power industry. These Piston seals are offered in a variety of compounds
FAX FAX
2 seals on eman HERCULES SEALS ON EMAN provies a wie selection of custom, cost effective sealing solutions using avance rapi-prototype technology. The programmable CNC prouction cell can manufacture both
RB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy
RB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy duty mobile and stationary service when rod leakage must be kept to a minimum. Double lip design reduces
MATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
SKF SEAL JET DD. Machined seals product range
SKF SEAL JET DD Machined seals product range 2 Content A Introduction Machined seals concept... 5 Sealing materials... 6 Introduction... 6 Thermoplastic elastomers - Polyurethanes... 7 Thermoplastic elastomers
MERKEL P7 Wiper Single-acting rod wiper made from Polyurethane with integrated metal retainer. PUR wiper for axial-accessible housings.
Página 1 de 5 PT 1 MERKEL PT 1 Low Friction Wiper Low friction wiper consisting of one profile ring with a sealing edge and a wiper edge, as well as two O-Rings as pre-load components. A wiper for improvement
ÍNDICE FICHAS TÉCNICAS
S BBES ÍNDICE S TÉCNICAS AFLAS-B85 EPDM-B85 EPDM-85-KTW EPDM-W85-FDA FPM-B85 FPM-B85-GD FPM-B85 FPM-B85-FDA HNB-B85 HNB-B85-GD HNB-B85-GD-LT NB-B85 NB-W85-FDA SILICONE-B85-FDA SILICONE-85-FDA 3 4 5 6 7
FREUDENBERG XPRESS CUSTOM-MANUFACTURED SEALS
FREUDENBERG XPRESS FREUDENBERG XPRESS CUSTOM-MANUFACTURED SEALS In today s economic environment Freudenberg Xpress is the clear solution for companies needing precise and speedy results. Short turnaround,
O-Rings & Circlips Catalogue
O-Rings & Circlips Catalogue 1 2 Contents O-Rings Table of Groove Dimensions for Dynamic & Static Sealing... 4 Resistance Properties of Various Elastomers... 5 Temperature Requirements... 6 Imperial: Guide
Capseal FOR HYDRAULIC AND PNEUMATIC CYLINDERS AND VALVES
Capseal FOR HYDRAULIC AND PNEUMATIC CYLINDERS AND VALVES What is Capseal? Capseal is a combination seal of rubber O-ring and Sunflon ring. This unique seal provides low friction operation and reduce possible
Mining Seal Profiles
Mining Seals Mining Seal Profiles INTRODUCTION Ludowici Seals is a business unit of Ludowici Limited, an Australian owned Public Company, established in 1858. LP 301 LP 302 LP 303 The Seals division produces
Texin 245 Covestro PUR Thermoplastic Polyurethane Elastomer (Polyester) Action Saturday, October 22, 2016 Units English Legend (Open) General Information Product Description Texin 245 resin is an aromatic
Technology on Your Wavelength
Standard forms of delivery, ex Lebanon, PA Sheets Thickness: Length: Width: 25 mm and 12.5 mm Custom thicknesses available on request 59" (1,500 mm) 3.3' (1,000 mm) Max. static load 124.0 Peak loads (rare,
Solutions for the mining, mineral processing and cement industries
Solutions for the mining, mineral processing and cement industries Machined seals The Power of Knowledge Engineering 2 Sealing solutions customized for your system performance SKF is a supplier of top
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
V-Rings around the clock... around the clock...
Description V-rings are rotary seals that can perform numerous jobs in their function of sealing rotating shafts: sealing against the penetration of dirt, dust, water or watery pollutants, combination
VERLON No Swell Wear Rings
VERLON No Swell Wear Rings Ultra precision +.001 tolerance on cross section NO SWELL - Lowest friction Strength to 40,000 PSI Large range of widths, cross sections and diameters - metric too Features &
Zurcon U-Cup RU2. Single Acting U-Cup Asymmetric, Double Lip, Compact Material: Zurcon
Single Acting U-Cup Asymmetric, Double Lip, Compact Material: Zurcon 121 122 U-Cup RU2 Description Today U-Cups are used primarily as seals for piston rods in hydraulic cylinders. U-Cups in polyurethane
The Right Seal for Every Application
The Right Seal for Every Application O-Rings The O-ring s simple & inexpensive design remains a popular and universal choice for sealing static and dynamic hydraulic systems. It seals efficiently in both
Wear Rings / Bearings
Wear Rings / Bearings Contents Product Offering... -3 Engineering... -4 Materials... -6 Wear Rings / Bearings Profiles WPT... -8 WRT... -12 PT... -16 PW... -20 Wear Rings / Bearings Parker offers a complete
Service. Freudenberg NOK Sealing Technologies. Merkel Xpress
Service Freudenberg NOK Sealing Technologies Merkel Xpress Merkel Xpress Custom-Manufactured Seals Demanding projects often require high-quality seals without delay or hassle. Our Merkel Xpress sevice
DATA SHEET OF COMPASHIELD EE GASKET
DATA SHEET OF COMPASHIELD EE GASKET Introduction Compashield EE gaskets developed by Nolato is extruded in parallel with dual conductive/non-conductive gaskets, provide both optimum EMI and environmental
Scraper WRM. Single Acting Material: NBR Elastomer
Scraper WRM Single Acting Material: NBR Elastomer 73 74 Scraper WRM Scraper WRM Description Scraper rings are essential components of any hydraulic or pneumatic equipment. These are protection components
High Surface Area Silica. High Performance Tread. STRUKTOL SCA 98 (Tetrasulfide)
Producers of Specialty Chemicals Struktol Company of America 1 E. Steels Corners Road P. O. Box 19 Stow, Ohio 9 www.struktol.com High Surface Area Silica in High Performance Tread with Next Generation
SKF seals the deal for a major mining operation
Customer reference case Borax mine Mean time between failure SKF sealing solutions SKF seals the deal for a major mining operation SKF is a registered trademark of SKF USA Inc. All other trademarks are
Material NBR NB black
page 1 / 5 Physical properties nominal range typical values Density ASTM D 1817, 23 C Hardness ASTM D 2240, Shore A, 23 C Tensile strength ASTM D 412, 23 C Elongation at Break ASTM D 412, 23 C ASTM D 395,
P54 PISTON SEAL TECHNICAL DETAILS. Part Number Structure. Double-Acting F E A T U R E S P54 M R N HLX. Compact piston design.
PISTON SEAL Double-Acting TECHNICAL DETAILS The Hallite P54 is a double-acting, o-ring energized, low-friction piston seal that performs well in both high- and low-pressure systems. High-performance Armorlene
TKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
DR magnetic piston. Compact Magnetic Sophisticated
DR magnetic piston Compact Magnetic Sophisticated DR Magnetic piston Compact Magnetic Sophisticated Guiding area Magnet Steel disc Spring space for single-acting cylinders Static sealing area Cushioning
KEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
A-700. Technical Information. Fluoroelastomers
A-700 Technical Information Introduction Viton A-700* is an A-family gum polymer that has demonstrated easy processing. This gum provides: Good flow for compression molding Good mold release Less mold
Zurcon U-Cup RU /*"-8#+-8 " (&*$8 " %*+(+$4
Zurcon U-Cup RU9 Your Partner for Sealing Technology Trelleborg Sealing Solutions is a major international sealing force, uniquely placed to offer dedicated design and development from our market-leading
Precision Seals for Pneumatics
Precision Seals for Pneumatics Parker-Prädifa are the result of many years of compound and profile development experience, allowing the pneumatics engineer to pursue new design options and techniques such
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers -
Description Product group Rod seal
Description Product group Rod seal Design N symmetrical u-ring (05) NI asymmetrical u-ring with inner main sealing lip (07) Profile no. 05/07 Specification E suitable for onesided pressure load Model STI
Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) 1) Male thread
M.3 0166 Diaphragm pressure switches with M3 screw terminal Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) Adjustment range tolerance at room temperature
TDI-terminated polyester based prepolymer
PRODUCT DATA VIBRATHANE 8080 TDI-terminated polyester based prepolymer Urethane Prepolymers VIBRATHANE 8080 VIBRATHANE 8080 is a TDI-terminated polyester based prepolymer which yields an 80 Shore A hardness
Hunger DFE GmbH Tandem Seal. Hunger DFE Tandem Seal
Hunger DFE GmbH Tandem Seal Hunger DFE Tandem Seal Hunger DFE Tandem Seals were particularly designed for application as rod and piston seals. Two types of this product range shall be presented at this
Elastollan Product Range
Thermoplastic Polyurethane Elastomers (TPU) Elastollan Product Range Elastogran is Polyurethanes Contents Quality management to DIN EN ISO 9001 Page 2 Nomenclature for Elastollan Page 3 Packaging, Storage
Operating conditions. Surface roughness R a R max
Merkel U-Ring NI 300 Merkel U-Ring NI 300 Asymmetrical sealing lips PUR profile ring Sealing edge Material Material Code Hardness Polyurethane 94 AU 925 94 Shore A Operating conditions Material 94 AU 925
Polon Rod sealing set
The single-acting rod sealing set profile consists of a PTFE rod sealing ring and an elastomer O-Ring as a preloading element. The asymmetrical cross-section of the slipper ring is designed for best drag
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
QCB Thermoplastic Bearing Units
QCB Thermoplastic Bearing Units CAT TP 2017 E Ver1 NBC Group Ltd In the interest of continuing improvement, NBC Group Ltd reserves the right to modify any product or specification without prior notice.
Dinosaur Flexible Wiring Duct
Dinosaur Flexible Wiring Duct Dinosaur self-adhesive flexible duct is ideal for transporting wiring to cabinet doors from control panel interiors (for that part of the cable run that leans against the
Crastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
Customized machined seals. Product range
Customized machined seals Product range Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as a high-quality bearing
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
Inspiring design innovation
IROGRAN Thermoplastic Polyurethanes Inspiring design innovation Product Overview IROGRAN TPU: Inspiring design innovation The manufacture of modern products, engineering components and technical parts
Parallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
O-Ring. FEP O-Ring. PTFE O-Ring. Isolast Perfluoroelastomer O-Ring
O-Rings O-Ring Double acting seal for static and dynamic applications. Available in various materials e.g. nitrile (NBR), fluorocarbon (FKM), ethylene propylene (EPDM), chloroprene, silicon, fluorosilicone,
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
Pressure switches hex 24
Pressure switches Normally open or normally closed, maximum voltage 42 V Low-cost solution for mechanical pressure monitoring. Stable switching point even after long use and high load. Switching point
Electrically Conductive Elastomer
Electrically Conductive Elastomer Product Overview Uvox conductive elastomers offer excellent shielding and environmental sealing. Conductive compounds can be extruded into various shapes and sizes. These
mmetric Master Seals Catalogue 05/06
mmetric NR Master Seals Catalogue NR Contents Metric Seals Seal Index Piston Double Acting 01 Piston Seals 02 Glide Rings 03 Piston Rings 04 Pneumatic Piston and Seal Piston Single Acting 05 Piston Seals
Hydraulic seals. A wide range for hydraulic cylinders in off-highway applications. The Power of Knowledge Engineering
Hydraulic seals A wide range for hydraulic cylinders in off-highway applications The Power of Knowledge Engineering Optimizing hydraulic cylinder sealing system performance See what you can achieve with
Polon Piston sealing set
The double-acting piston sealing set profile consists of a PTFE piston sealing ring and an elastomer O-Ring as a preloading element. Profile is particularly suitable for double-acting pistons in control
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
O.C.D.B. Rear Brake Seals
O.C.D.B. Rear Brake Seals 14 PARK BRAKE PISTON PARK BRAKE SPRINGS C D A Face to Face Seal B Face to Face Seal C Park Brake Seal D Service Piston Seal SERVICE BRAKE PISTON 14 B A SPLINED DISCS AND FRICTION
Product overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy Category : Polymer, Thermoplastic Material Notes: Main Characteristics: Low Creep; Low moisture absorption; Flame retardant; Low impurity ions; Good machinability;
X-Rings & Multiseals. Low Friction Seals. Phone: Fax: Toll: (800)
Multiseals Low Friction Compression Seals Runs Circles Around O-Rings! After years of concentrated research, PAI has perfected synthetic rubber hydraulic and pneumatic seals that are far superior to O-
Multi-Circuit Rotary Block
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Multi-Circuit Block for Rotating Applications Multi-Circuit Rotary Block 302 Make to Order Suitable for Low-Speed Rotating Applications
Tel +44 (0) Fax +44 (0)
Tel +44 (0)1235 815816 Fax +44 (0)1235 811234 E-mail oilite@bowman.co.uk Contents Page Company Profile 1-2 ISO Certificate 2 Product Pictures 3 Wrapped Bearings Technical Information 4 Wrapped Bearings
Datasheets - General Purpose Elastomers
Datasheets - General Purpose Elastomers Natural Rubber (NR) Market introduction 1840 Price indication, volume index compound 1,0 Service temperature, min C -50 Service temperature, max C +80 Mechanical
In case the operating parameters are requested at maximum level, these values may not be achieved.
All information contained in our catalogue is released only for general usage and not valid for special applications. Given parameters such as maximum pressure, temperature, sliding speed, surface contact
SCRAPERS. Busak+ Shamban
SCRAPERS 1 2 Scrapers Contents Choice of Scraper Element... 4 Turcon R Excluder R 2... 7 Turcon R Excluder R 5... 15 Turcon R Excluder R 500... 23 Scraper DA17... 29 Scraper DA22 and RSW... 35 Scraper
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
ISSUE 1/08/14 B E A R I N G S A N D C O M P O N E N T S Contents Company Profile Products Wrapped Bearings Technical Information WMU & WMXMU & WMX Wrapped Bearings Metric Plain U Type Wrapped Bearings
Hydraulic cylinder Type CDL1
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics RE 17 325/01.03 Replaces: 07.02 Hydraulic cylinder Type CDL1 Series
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
TKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
GBL-600S. Technical Information. Fluoroelastomers
GBL-600S Technical Information Introduction Viton GBL-600S is a next generation, easy processing, peroxide-cured 68% fluorine fluoroelastomer based on new Advanced Polymer Architecture (APA) technology.
Components: Dimensions / Order Codes
Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide
ASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
Diaphragm pressure switches up to 42 V with brass housing. Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) 1) Male thread
0167 Diaphragm pressure switches with brass housing Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) Adjustment range tolerance at room temperature Male thread NO : NC : 36 Screw
Air Powered Double Diaphragm Pumps. Polypropylene Pumps. Made In Japan
Air Powered Double Diaphragm Pumps Polypropylene Pumps Made In Japan Presenting YTS Double Diaphragm Pumps Made In Japan Fully Non-Lubricated Design High Flow Rates Efficient Air Consumption Easy & Fast
Bondstrand 5000/5000C Product Data (Severely Corrosive Industrial Service and Oxidizing Acids)
Bondstrand 5000/5000C Product Data (Severely Corrosive Industrial Service and Oxidizing Acids) Uses and Applications Acid drains Bleach processing Chemical process piping Chlorinated water Chlorine Corrosive
Wiring Duct T1 Series - Slotted
Duct T1 Series - Slotted UL file E123572 T1 Series Gray Open Slot Rigid PVC (including cover) Catalog Standard Carton Package Quantity Price Catalog Single Piece Pkg Package Quantity Price T1-0506G 20
Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
B-202. Technical Information. Fluoroelastomers
B-202 Technical Information Introduction Viton B-202* fluoroelastomer is a low viscosity, B-type gum polymer that demonstrates improved processing and rheology when compared with existing fluoroelastomers.
Merkel Double Wiper PT 2
Merkel Double Wiper PT 2 Merkel Double Wiper PT 2 Material O-rings Profile ring Profile ring Material PTFE bronze compound Code PTFE B602 Fig. 1 Merkel Double Wiper PT 2 O-ring Material Code Hardness Nitrile
UPN. Rod and piston seal with energizing element UPN
Rod and piston seal with energizing element MATERIAL 1 1 Type Polyurethane Designation SEALPUR 93 Hardness 93 ShA 2 2 Type Nitril Rubber NBR Designation RUBSEAL 70 Hardness 70 ShA Pressure 400 bar FIELD
ZURCON L-CUP. - Single Acting - Innovative Design based on U-Cup - Low Friction Properties - Material - Polyurethane Busak+ Shamban
contents (catalogue) main menu product range fullscreen/variable R ZURCON L-CUP - Single Acting - Innovative Design based on U-Cup - Low Friction Properties - Material - Polyurethane 81 82 Zurcon R L-Cup
PE-HDXc pipes (physically cross-linked polyethylene pipes)
pipes (physically cross-linked polyethylene pipes) Applications: Domestic drinking water installations, radiator connections and surface regulation Special properties high chemical resistance (according
Precision seals for pneumatics
Precision seals for pneumatics Parker Prädifa pneumatic seals are the result of many years of compound and profile development experience, allowing the pneumatics engineer to pursue new design options
FABRIC-RUBBER CONVEYOR BELTS, GENERAL PURPOSE
FABRICRUBBER CONVEYOR BELTS, GENERAL PURPOSE APPLICATION Rubber fabric conveyor belts for general purpose are used for transport of loose materials where particular requirements towards working conditions
FA SERIES KNIFE GATE PNEUMATIC CYLINDERS... 8
FA SERIES KNIFE GATE PNEUMATIC CYLINDERS......... 8 section 8 154 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Dimensional Information FA SERIES DIMENSIONS BASIC DIMENSIONS PLUS
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit 71 I Fuse 105 Electrofusion Processor The IntegriFuse I Fuse 105 Electrofusion Processor is the next generation
SA Spring return type DA Air return type
Smart Solution for Actuator Pneumatic Actuator 0 R A T RAT Series Pneumatic Actuator was designed and developed based on the advanced technology and new material. Order Code R AT Code KZE Product Actuator
PT 1 MERKEL PT 1 Low Friction Wiper Low friction wiper consisting of one profile ring with a sealing. Applications: Technical Data
PT 1 MERKEL PT 1 Low Friction Wiper Low friction wiper consisting of one profile ring with a sealing edge and a wiper edge, as well as two O-Rings as pre-load components. A wiper for improvement of overall
Raw Edge Molded Cog Classical V Belts & High Power Molded Cog Wedge Belts
Raw Edge Molded Cog Classical V Belts & High Power Molded Cog Wedge Belts standards DIN 2215/DIN 7753 (Part 1) ISO 4184 BS 3790 ISO 4183 Protorque Raw Edge Molded Cog Classical V and High Power Wedge Belts
QS-III. 5513A, 5514A, 5515A and 5516A 15 kv Cold Shrink Inline Splice Kits. Data Sheet CAUTION. 1. Product Description. 2. Applications.
QS-III 5513A, 5514A, 5515A and 5516A 15 kv Cold Shrink Inline Splice Kits Data Sheet Tape Shield Wire Shield UniShield Kit Contents: 1 Cold Shrink Silicone Rubber Splice Body 1 Cold Shrink Adapter Tube
ML SERIES. Double-Acting Hydraulic Valve Actuator. Thrusts up to 1,500,000 lbs SIL-3 Capable GT3 Triple Seal Gland for Severe Service Applications
Actuation Solutions and Systems for the World s Most Challenging nvironments ML SRIS Double-Acting Hydraulic Valve Actuator Designed & ngineered for Severe-Service Applications Thrusts up to 1,500,000
Surface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-U Laminate system for concrete and steel substrates Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates Description
SHAFT-EZE SHAFT SLEEVES
We Are Seals SHAFT SLEEVES SHAFT SLEEVES Vendor Number 131610 WE ARE seals. Better seals. Better Support. It s not marketing speak or something we aspire to be. Seals are in our DNA. Everything we do is
Material Selection Guide
Material Selection Guide Markets Communications Computers Transportation Electronics Appliances Medical Devices Industrial Applications LCD Gaskets Battery Pressure Pads Speaker Gaskets Environmental Seals