Electrically Conductive Elastomer
|
|
|
- Britney Mathews
- 6 years ago
- Views:
Transcription
1 Electrically Conductive Elastomer Product Overview Uvox conductive elastomers offer excellent shielding and environmental sealing. Conductive compounds can be extruded into various shapes and sizes. These electrically conductive silicones can be formulated to meet your specific requirements and are designed to meet Mil G revision B specifications. Specification Moulded Grades General Properties ECE Product Code M1 M2 M3 M4 Elastomer Type Si Si Si EPDM Filler Material Ag/Glass Ag/Al Ni/Gr Ag Colour Tan Blue Black Tan Volume Resistivity (Ohm.cm) Max MIL G khz (H Field) MIL G MHz (E Field) SAE ARP MHz (E Field) GHz (Plane Wave) GHz (Plane Wave) Specific Gravity (g.cm 3) ± 5% ASTM D Hardness (Shore A) ± 5 ASTM D Max Operating Temperature ( C) Min Operation Temperature ( C) ASTM D Please note the hardnesses stated are for our standard range, ± 5 Shore A. Please consult us for other hardness requirements. Uvox do not offer standard mouldings, therefore a product drawing or sketch must be supplied with all new quote requests. Electrically Conductive Elastomer 1
2 Extruded Grades General Properties ECE Product Code E1 E2 E3 E4 E5 E6 E7 Elastomer Type Si Si Si Si Si Si Si Filler Material Ag/Ni Ag/Cu Ag/Cu Ag/Al Ag/Glass Ag/Glass Ag/Glass Colour Tan Tan Tan Tan Tan Tan Tan Volume Resistivity (Ohm cm) Max khz (H Field) MHz (E Field) MIL G MHz (E Field) GHz (Plane Wave) MIL GHz (Plane Wave) Specific Gravity (g.cm 3) ± 5% ASTM D Hardness (Shore A) ± 5 ASTM D Tensile Strength (MPa) Min ASTM D Elongation (%) Min ASTM D Compression (%) Max ASTM D Max Operating Temperature ( C) Min Operation Temperature ( C) ASTM D ECE Product Code E8 E9 E10 E11 E12 E13 E14 Elastomer Type Si Si Si F/Si F/Si F/Si F/Si Filler Material Ni/Gr Ni/Gr Ag/Al Ag/Ni Ag/Cu Ag/Al Ni/Gr Colour Grey Grey Tan Tan Tan Lt. Grn Dk. Grn Volume Resistivity (Ohm cm) Max khz (H Field) MHz (E Field) MIL G MHz (E Field) GHz (Plane Wave) MIL GHz (Plane Wave) Specific Gravity (g.cm 3) ± 5% ASTM D Hardness (Shore A) ± 5 ASTM D Tensile Strength (MPa) Min ASTM D Elongation (%) Min ASTM D Compression (%) Max ASTM D Max Operating Temperature ( C) Min Operation Temperature ( C) ASTM D Electrically Conductive Elastomer 2
3 Features Specifically compounded for the extrusion process. Excellent physical and electrical properties over an effective temperature range of 50 C to +160 C. Good resistance to chemicals and weathering. Splash resistant to most mineral oils and greases. (Fluoro silicone grades offer enhanced fuel oil resistance). Can achieve IP65 rating when installed correctly. Profiles The extrusion profiles shown below are standard, readily available sizes. Uvox also supply custom profiles for specialised applications. All values are mm ± 0.15 mm. ROUND SECTION FLAT SECTION HOLLOW ROUND SECTION Code A Code A B Code A B Electrically Conductive Elastomer 3
4 Profiles Continued D SECTION CHANNEL SECTION Code A B Code A B C D HOLLOW 'D' SECTION HOLLOW 'P' SECTION Code A B C Code A B C D Electrically Conductive Elastomer 4
5 Profiles Continued HOLLOW RECTANGULAR SECTION Code A B C Product Selection Code ECE E Product Name Material Extrusion Profile Electrically Conductive Elastomer Material Code (M1 4, E1 14) Extrusion Code (Leave blank for M series.) Above example: Flat fluorosilicone, with Silver/Nickel particles: width 22.35mm, height 1.55mm. UVOX LTD. 14/3 Stanmore Industrial Estate Bridgnorth Shropshire WV15 5HR Tel: +44 (0) Fax: +44 (0) We believe the information contained in this data sheet is accurate and representative of the product; however, it is the responsibility of the user to determine the suitability and safety of use in any application. Uvox Ltd. has a policy of continual improvement and updating of its products and services, and so reserves the right to change product specification without notice. Registered Office: Building 14/Unit 3 Stanmore Industrial Estate, Bridgnorth, Shropshire, WV15 5HR, United Kingdom. Business Registration No: Uvox Limited. All rights reserved. T/DS/ECE/ Electrically Conductive Elastomer 5
Design Guide. Military and Commercial Parts Made in the USA for over 30 Years PROUDLY MADE IN THE USA SERVICE EXPERIENCE TECHNOLOGY DESIGN
PROUDLY MADE IN THE USA Design Guide Military and Commercial Parts Made in the USA for over 30 Years SERVICE EXPERIENCE TECHNOLOGY DESIGN New England Die Cutting, Inc. American EMI Solutions, a Division
EMI/RFI Gaskets for Connectors (2000 Series)
EMI/RFI Gaskets for Connectors (00 Series) Grounding of Connectors to an enclosure bulkhead in a manner that will reduce the ingress or egress of EMI/RFI interference can be accomplished through the use
DATA SHEET OF COMPASHIELD EE GASKET
DATA SHEET OF COMPASHIELD EE GASKET Introduction Compashield EE gaskets developed by Nolato is extruded in parallel with dual conductive/non-conductive gaskets, provide both optimum EMI and environmental
Electrical Stability (ohm-cm, max.) Heat Aging Resistance After
CONDUCTIVE ELASTOMER WAVEGUIDE GASKETS Waveguide Gaskets For effective EMI shielding and pressure sealing for choke, cover and contact flanges, Chomerics waveguide gaskets ensure low insertion, low flange
Quick Splice II. 35 kv Molded Rubber Inline Splicing Kit Data Sheet. 2. Applications. 1. Product Description
Quick Splice II 5461 (CN) Cable (JCN) Cable 35 kv Molded Rubber Inline Splicing Kit Data Sheet Accessory Splice Jacket 1. Product Description The 3M 5461 Quick Splice II is a 35 kv class inline splice
Quick Splice II 5451R. 25/28 kv Molded Rubber Cable Repair Splicing Kit Data Sheet. 1. Product Description. 2. Applications
Quick Splice II 5451R (CN) Cable (JCN) Cable Accessory Splice Jacket 25/28 kv Molded Rubber Cable Repair Splicing Kit Data Sheet 1. Product Description The 3M 5451R Quick Splice II is a 25/28 kv class
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
INCH-POUND MIL-DTL-23053/1C 17 June 1996 SUPERSEDING MIL-I-23053/1B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED
INCH-POUND MIL-DTL-23053/5C 17 June 1996 SUPERSEDING MIL-I-23053/5B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED This specification
ÍNDICE FICHAS TÉCNICAS
S BBES ÍNDICE S TÉCNICAS AFLAS-B85 EPDM-B85 EPDM-85-KTW EPDM-W85-FDA FPM-B85 FPM-B85-GD FPM-B85 FPM-B85-FDA HNB-B85 HNB-B85-GD HNB-B85-GD-LT NB-B85 NB-W85-FDA SILICONE-B85-FDA SILICONE-85-FDA 3 4 5 6 7
Material NBR NB black
page 1 / 5 Physical properties nominal range typical values Density ASTM D 1817, 23 C Hardness ASTM D 2240, Shore A, 23 C Tensile strength ASTM D 412, 23 C Elongation at Break ASTM D 412, 23 C ASTM D 395,
3 TM Cold Applied Barrier Boot System
M Technical Information : Barrier Boot TM Cold Applied Barrier Boot System For rated voltages 6.5/11(12) kv and 8.7/15(17.5) kv 92-EE 717-1 Product Description The Cold Applied Barrier Boot System consist
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED
INCH-POUND 17 June 1996 SUPERSEDING MIL-I-23053/11B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED This specification
TMS CABLE MARKERS CM-SCE & CM-SCE-TP. Tie on Identification Product
Page 1 of 12 October 2015 Specification RW-2513 Document Number: 108-121016 TMS CABLE MARKERS CM-SCE & CM-SCE-TP Including HL cable marker range Tie on Identification Product SCOPE This quality assurance
Material Selection Guide
Material Selection Guide Markets Communications Computers Transportation Electronics Appliances Medical Devices Industrial Applications LCD Gaskets Battery Pressure Pads Speaker Gaskets Environmental Seals
Fujipoly New Product Technical Information
Fujipoly ew Product Technical Information EW PRODUCT : SARCO GR-SL Thermally Conductive and on-flammable Silicone Gel Sheets 1. Features: Sarcon GR-SL is the lowest modulus type thermal gap filler material.
Fujipoly New Product Technical Information
Fujipoly ew Product Technical Information 1. Features: Sarcon GR-SL is the lowest modulus type thermal gap filler material. It preserves thermal performance of the original Sarcon GR-L material, 2.7 Watt/m-K
global solutions : local support EMI Capabilities
global solutions : local support EMI Capabilities www.lairdtech.com Laird Technologies is the world-leader in the design and supply of customized performance-critical products for wireless and other advanced
3M Cold Shrink QS-III Inline Splice Kits 15 kv 5513A, 5514A, 5515A and 5516A
3M Cold Shrink QS-III Inline Splice Kits 15 kv Data Sheet June 2014! CAUTION Working around energized high-voltage systems may cause serious injury or death. Installation should be performed by personnel
Products of integrity from people of integrity. w w w. n e w m a n g a s k e t. c o m
Products of integrity from people of integrity. O -RINGS w w w. n e w m a n g a s k e t. c o m 1 How to size your O -Rings Newman Elastomer Characteristics If you don t know the size or number of the O
Pneumatic Seals 1/2 Pneumatic Seals 2/2. Pneumatic Seals
Seals Seals * 1 Mpa = 10 Bar 1 Bar = 14.5 psi 1 Mpa = 145 psi Combination Wiper/Rod Seal This pneumatic rod seal/wiper Set profile is fitted into housings with a circlip recess according DIN 7993 (type
Sponge rubber products are manufactured in many different processes either by vulcanization in moulds or by extrusion.
Introduction Sponge rubber profiles from EPDM, CR, NBR, NR in various colours Sponge rubber is a cellular, softly elastic material made of caoutchouc. During vulcanization the material inflates forming
QS-III. 5513A, 5514A, 5515A and 5516A 15 kv Cold Shrink Inline Splice Kits. Data Sheet CAUTION. 1. Product Description. 2. Applications.
QS-III 5513A, 5514A, 5515A and 5516A 15 kv Cold Shrink Inline Splice Kits Data Sheet Tape Shield Wire Shield UniShield Kit Contents: 1 Cold Shrink Silicone Rubber Splice Body 1 Cold Shrink Adapter Tube
Chenguang Fluoroelastomer
Technical Information Chenguang Fluoroelastomer Precompound CG A60C Features and Benefits Composition Characters Process Targets Curatives Di-polymer of VDF and HFP, with incorporated curative Broad MWD,
CABELEC Conductive Compounds Product Selection Guide
Conductive Compounds CABELEC Conductive Compounds Product Selection Guide CABELEC Conductive Compounds Product SELECTION Guide Cabot s Performance Materials: Over 130 Years of Getting You Where You Want
No carcinogenic nitrosamine generating raw materials are used.
MATERIAL DATA SHEET FIRE RESISTANT - LOW SMOKE - LOW TOXIC EPDM 60 SHORE A APPROVED TO EN 45545-2: 2013 + A1:2015 HL3 for R22/ R23/ R24/ R25/ R26 Requirement Sets QUALITY NO. H 45-1000 Mechanical Properties
Polyamide 6 for Injection Moulding
Polyamide 6 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Excellence in Polymerization Recent technical advancements in NUREL polymerization processes have enabled
Vulcatec your partner for hot vulcanized gaskets
Vulcatec your partner for hot vulcanized gaskets About us Vulcatec has been delivering know-how and high quality products for over 30 years. As a specialist in the field of made-to-measured gaskets, we
Inspiring design innovation
IROGRAN Thermoplastic Polyurethanes Inspiring design innovation Product Overview IROGRAN TPU: Inspiring design innovation The manufacture of modern products, engineering components and technical parts
3M Cold Shrink 3-Conductor Inline Splice Kits QS-III 5786A- MT, 5787A-MT and 5788A-MT 25/28 kv for use with Armored and Non- Armored 3/C Cable
3M Cold Shrink 3-Conductor Inline Splice Kits QS-III 5786A- MT, 5787A-MT and 5788A-MT 25/28 kv for use with Armored and Non- Armored 3/C Cable Data Sheet September 2010 Description 3M Cold Shrink 3-Conductor
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled Base - epoxy resin - two-component Use - for the trowelling of welded seams - pasty and run-resistant but
CONDUCTIVE COMPOUNDS. CABELEC Conductive Compounds Product Selection Guide
CONDUCTIVE COMPOUNDS CABELEC Conductive Compounds Product Selection Guide Cabot s Performance Materials: Over 130 Years of Getting You Where You Want to Go Cabot Corporation is a global performance materials
PETSEALS. Material TENSILE STRENGTH (KG/CM 2 ) ELONGATION(%) TEMPERATURE RANGE( ) MATERIAL %MAX HRSX NITRILE 70 (NBR 70) ~100 70H x
Ver:201.0. INDEX 1 2 PHYSICAL AND CHEMICAL PROPERTIES OF THE MOST IMPORTANT ELASTOMERS 3 GLAND DIMENSIONS 4 SURFACE IMPERFECTIONS 5 DIMENSIONAL TOLERANCES 6 O-RING PAGE O-RING AS-568 SERIES 01-06 O-RING
Waveguide Gaskets CONDUCTIVE ELASTOMERS. Waveguide Gaskets. Table 1 CHO-SEAL 1212 CHO-SEAL 1239 SPECIFICATIONS
CONDUCIVE ELSOMERS Waveguide Gaskets Waveguide Gaskets For effective EMI shielding and pressure sealing for choke cover and contact flanges Chomerics waveguide gaskets ensure low insertion low flange leakage
Sealing Elements. Technical Handbook O-rings. 22. On-line tools - Conversion Tables
Teflex-VMQ Silicone - Technical Data Sheet 1. Introduction ERIKS Teflex O-Rings (VMQ silicone) are composed of a Silicone elastomer encapsulated in seamless FEP or PFA-cover. The elastomer works as a rubbermaterial
Installation device. HelaTape. Electrical tapes for sealing, insulation and bundling of cable and conduits.
Electrical tapes for sealing, insulation and bundling of cable and conduits. HellermannTyton offers a wide range of PVC and rubber tapes for sealing, insulation and bundling of cable and conduits. PVC-
Elastollan Product Range
Thermoplastic Polyurethane Elastomers (TPU) Elastollan Product Range Elastogran is Polyurethanes Contents Quality management to DIN EN ISO 9001 Page 2 Nomenclature for Elastollan Page 3 Packaging, Storage
3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series
3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series Data Sheet 1. Product Description 3M Cold Shrink Termination Kit QT-III 7672-S-8 Series contains one silicone rubber termination
Installation Devices 4
Installation Devices 4 4.1 Tapes HelaTape Flex - Vinyl Electrical Tapes HelaTape Wrap - Vinyl Tapes HelaTape Shield - Conductive Tapes HelaTape Flex 15 - All Purpose Vinyl Insulating Tape HelaTape Flex
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled Base - epoxy resin - two-component Use - high-strength construction adhesive - multi-purpose - the cured
3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv
3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv Data Sheet September 2014 Description 3M Cold Shrink QT-III Silicone Rubber Termination Kits, 7640-T
O RINGS FDA AND USP CLASS VI
O RINGS FDA AND USP CLASS VI PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY How to size your O -Rings Elastomer Characteristics If you don t know the size or number of the O -Ring, you will need to determine
Mining Seal Profiles
Mining Seals Mining Seal Profiles INTRODUCTION Ludowici Seals is a business unit of Ludowici Limited, an Australian owned Public Company, established in 1858. LP 301 LP 302 LP 303 The Seals division produces
Table of CONTENTS AB AB AB-138 (FDA) AB BLAST AB
7069-F (03-05-2018) Table of CONTENTS SECTION 1 : NATURAL (NR)...1. AB-131...1.1 AB-135...1.2 AB-138 (FDA)...1.3 AB-139 - BLAST...1.4 AB-148...1.5 SECTION 2 : SBR (Packing and Skirtboard)...2. IM-165...2.1
Silicone Coolant Hose
ilicone Coolant Hose Distributor Product ist 0 ilicone & EPDM Hose Providing solutions in technical hose requirements for turbo charger, coolant and heater hose applications. ilicone Coolant Hose ilicone
NORMAFIX Retaining Products
HMK Retaining clamps with brackets HMK retaining clamps with brackets are used to attach containers or pipes to ceilings and walls. They are also used in mechanical engineering and plant construction.
P & P Technology Ltd
P & P Technology Ltd General Information Produced effectively from a single continuous filament, knitted wire meshes produce very high levels of EMI shielding performance when evenly compressed between
O-Rings & Circlips Catalogue
O-Rings & Circlips Catalogue 1 2 Contents O-Rings Table of Groove Dimensions for Dynamic & Static Sealing... 4 Resistance Properties of Various Elastomers... 5 Temperature Requirements... 6 Imperial: Guide
A-700. Technical Information. Fluoroelastomers
A-700 Technical Information Introduction Viton A-700* is an A-family gum polymer that has demonstrated easy processing. This gum provides: Good flow for compression molding Good mold release Less mold
Foxtronic GmbH EMI Products
Foxtronic GmbH EMI Products Contents Conductive Fabrics Conductive Tapes Shield foam Gaskets Conductive Cushions Electromagnetic Wave Absorber Conductive Elastomers Isobest Conductive Fabrics Property
Solutions for the mining, mineral processing and cement industries
Solutions for the mining, mineral processing and cement industries Machined seals The Power of Knowledge Engineering 2 Sealing solutions customized for your system performance SKF is a supplier of top
Crastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
Contents. Rubber Process Oils Secondary Plasticiser for Thermoplastics, Elastomers & Plastics Aromatic Naphthenic...
Process Oils Contents Product Page Rubber Process Oils... 3 Aromatic... 3 Naphthenic... 4 Paraffinic... 5 Secondary Plasticiser for Thermoplastics, Elastomers & Plastics... 5 Process Oils Rubbers both
Honeywell Salisbury Outage Protection. Bushing Covers, Conductor Covers, Instant Insulation
Honeywell Salisbury Outage Protection Bushing Covers, Conductor Covers, Instant Insulation Why You Should Use Outage Protection The cost of animal caused outages to the utilities is preventable. Animals
Flame Resistance, LOI 95 >
Fluoropolymers 100 When Your Application Requires 100% Reliability. NWI fluoropolymer cables offer these outstanding performance characteristics: Resistance to flame, acids, solvents, chemicals and more
Tubing. Direct from the manufacturer
Tubing Direct from the manufacturer 1 Diversity is our strength Spetec tubing is offered in a number of different materials: PVC (standard and solvent-resistant), Polyurethane, Fluoro rubber comparable
Polyamide 6 & 66 for Injection Moulding
Polyamide 6 & 66 for Injection Moulding Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Polymerization Integrated into In-House Compounding 50 years experience in polymerization processes
TECHNYL A 218 BLACK 21N
TECHNYL A 218 BLACK 21N Description TECHNYL A 218 Black 21 N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding.it is available in black color. Key Properties Chemical
Fluid Sealing Association
Fluid Sealing Association STANDARD FSA-DSJ-401-09 SPECIFICATION FOR HIGH TEMPERATURE AND ACID RESISTANT TERPOLYMER FLUOROELASTOMER REVISED OCTOBER, 2009 994 Old Eagle School Road, Suite 1019 Wayne, Pennsylvania
Reach. Catalogue 01/2014. Fisatech s.r.o., Hlavná 361/53, Z. Teplica, tel.: ,
ISO9001 RoHS Reach Catalogue 01/2014 Fisatech s.r.o., Hlavná 361/3, 076 64 Z. Teplica, tel.: 0908 13 761, e-mail: info@fisatech.sk www.fisatech.sk Fisatech s.r.o., Hlavná 361/3, 076 64 Z. Teplica, tel.:
WHITE OILS MAX 160 MIN. liquid cst
WHITE OIL 8 0.812 0.845 0.810 0.842 0.819 0.816 7 10 cst 5 cst 476 6 MAX 39 150 MIN 154 WHITE OIL 12 0.818 0.858 0.815 0.855 0.824 0.821 10 14 cst 19 cst 6 MAX 24 160 MIN 166 476 The above data is indicated
NORDEL EPDM Product Selection Guide
NORDEL EPDM Product Selection Guide NORDEL EPDM products are members of Dow s family of ethylene propylene diene terpolymers and feature the widest range of ethylene content available in the industry.
MATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
Texin 245 Covestro PUR Thermoplastic Polyurethane Elastomer (Polyester) Action Saturday, October 22, 2016 Units English Legend (Open) General Information Product Description Texin 245 resin is an aromatic
Cylindrical Types, High-Voltage Mica Capacitors Types 291, 292, 293, 294 Cylindrical Case, High-Current and High-Voltage Circuits
Types 291, 292, 293, 294 Cylindrical Case, High-Current and High-Voltage Circuits Designed for frequencies ranging from 100 khz to 3 MHz, Mica Capacitor Types 291, 292, 293 and 294 are well suited for
MODULAR FIBERGLASS ENCLOSURE CATALOG D EMAND INNOVATION. NEMA/UL Type 4X
MODULAR FIBERGLASS ENCLOSURE CATALOG D EMAND INNOVATION NEMA/UL Type 4X IBOCO's New Modular Fiberglass Enclosures allow you to THINK OUTSIDE THE BOX WORK THE MODULAR FIBERGLASS ENCLOSURE An innovator in
High Surface Area Silica. High Performance Tread. STRUKTOL SCA 98 (Tetrasulfide)
Producers of Specialty Chemicals Struktol Company of America 1 E. Steels Corners Road P. O. Box 19 Stow, Ohio 9 www.struktol.com High Surface Area Silica in High Performance Tread with Next Generation
Recycling with ECO-FLEX RTPV Thermoplastic Elastomer
ECO-FLEX RTPV General Purpose Presentation Recycling with ECO-FLEX RTPV Thermoplastic Elastomer An Opportunity to Cut Costs! Market Definition Elastic Polymers (Rubber) Thermoset Rubbers (TS) Thermoplastic
Datasheets - General Purpose Elastomers
Datasheets - General Purpose Elastomers Natural Rubber (NR) Market introduction 1840 Price indication, volume index compound 1,0 Service temperature, min C -50 Service temperature, max C +80 Mechanical
O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI
O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI O -Rings PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY How to size your O -Rings Newman Elastomer Characteristics If you don t know the
Blast Valves for HVAC Ducting
Blast Valves for HVAC Ducting Introduction European EMC Products Ltd was established in July 1996 to supply high quality products and services to the Electro- Magnetic Compatibility (EMC) market. Quality
B-202. Technical Information. Fluoroelastomers
B-202 Technical Information Introduction Viton B-202* fluoroelastomer is a low viscosity, B-type gum polymer that demonstrates improved processing and rheology when compared with existing fluoroelastomers.
MITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
Shielded Windows and Vent Panels
Shielded Windows and Vent Panels We practice environmental protection Table of Contents Shielded Windows...............................................3-6 Shielded Acrylic Windows.....................................7-8
20. HONEYCOMB VENT PANEL
20. HONEYCOMB VENT PANEL FilterS. GENERAL INFORMATION Euro Technologies offers EMI Shielding Ventilation Panels. Available in a wide choice of materials, platings, and mounting configurations, it offers
MEA RIN Plus 100 and Expert 100. Technical data sheet. Material properties. Description and sizes. Edge protection MEARIN Plus
MEA RIN Plus and Expert Technical data sheet 136 0 Plus.1RW channel Plus.1 channel Plus.0 channel 158 Ø110 184 184 Ø110 Material properties Channel body and accessories SMC (sheet moulded compound) Glassfibre
Presby Steel, LLC. 143 East Milan Road Berlin, NH FAX:
143 East Milan Road 603-752-3022 FAX: 603-752-2821 1 S BEAMS (I Beams) Conforms to ASTM A36 Designation Web Depth/Inches Thickness Flange in Inches Area x Wt./Ft./Lbs. in Inches Width Thickness Sq. In.
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
Silent Gliss. Electric Curtain Track Systems
Electric Curtain Track Systems 2 Electric Curtain Track System Autoglide Product Information Electric Curtain Track System Silent Gliss for light to medium weight curtains. This system is powered by a
CREATING TOMORROW S SOLUTIONS MOBILITY. e-novation FOR CABLES AND CONNECTORS POWERED BY SILICONES
CREATING TOMORROW S SOLUTIONS MOBILITY e-novation FOR CABLES AND CONNECTORS POWERED BY SILICONES SILICONE CABLES AND CONNECTORS THE POWER HIGHWAY High-performance, silicone cables are required to be the
Cold Shrink Silicone Rubber Termination Kit QT-III 7620-S, 7690-S and 7680-S Series kv
Cold Shrink Silicone Rubber Termination Kit QT-III 7620-S, 7690-S and 7680-S Series 5-34.5 kv Data Sheet 1.0 Product Description 3M Cold Shrink Silicone Rubber Termination Kit QT- III 7620-S, 7690-S and
specified to fit your environment
specified to fit your environment An Engineering solution provider offering advanced silicone and organic rubber products, for a wide range of diverse applications. Decades of experience and expertise
PRODUCT DATA SHEET SP-1386
DESCRIPTION: ADVANTAGES: SP-1386 is a hybrid two-component elastomeric polyurethane coating designed for long-term corrosion protection of steel and concrete substrates. SP-1386 is available in Spray Grade
Product Datasheet. Cable TV Junction Box (Page 4)
JUNCTION BOX Product Datasheet Junction Box Bolted Type (Page 2) Cable TV Box (Page ) Cable TV Junction Box (Page 4) Telephone Box (Page 5) Telephone Junction Box (Page 6) GRP Junction Box Enclosures are
THE ECONOMICS OF RECYCLING RUBBER
THE ECONOMICS OF RECYCLING RUBBER Bob Kind Polymer Recyclers Ltd Rubber in Engineering Meeting - 10 th December 2010 Key Drivers Rubber prices follow oil prices but can be influenced more dramatically
Silent Gliss. Electric Curtain Track Systems
Electric Curtain Track Systems 2 Electric Curtain Track System Autoglide Product Information Electric Curtain Track System Silent Gliss for light to medium weight curtains. This system is powered by a
Technical Data. BiRotor Plus Positive Displacement Meter
Technical Data BiRotor Plus Positive Displacement Meter B27X 3 ANSI (DN80) B30X 6 ANSI (DN150) B28X 4 ANSI (DN100) B31X 8 ANSI (DN200) B29X 6 ANSI (DN150) B32X 10 ANSI (DN250) General The BiRotor Plus
TRAILER COMPONENTS AL-KO MOULDED MUDGUARD SYSTEM
TRAILER COMPONENTS ALKO MOULDED MUDGUARD SYSTEM FOR COMMERCIAL & LEISURE TRAILERS New Generation Mudguard System Designed for trailers with character The new ALKO Mudguard System performs efficiently in
QCB Thermoplastic Bearing Units
QCB Thermoplastic Bearing Units CAT TP 2017 E Ver1 NBC Group Ltd In the interest of continuing improvement, NBC Group Ltd reserves the right to modify any product or specification without prior notice.
Components: Dimensions / Order Codes
Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide
Tel +44 (0) Fax +44 (0)
Tel +44 (0)1235 815816 Fax +44 (0)1235 811234 E-mail oilite@bowman.co.uk Contents Page Company Profile 1-2 ISO Certificate 2 Product Pictures 3 Wrapped Bearings Technical Information 4 Wrapped Bearings
VIP TUNNEL SEGMENT GASKETS
VIP TUNNEL SEGMENT GASKETS www.vip-polymers.com GLOBALLY APPROVED SEALING GASKETS VIP-Polymers was founded in 1923, specialising in seals and gaskets for high pressure potable water applications. The company
Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
Connected Home OTRX 2-way 1.2GHz Regal Tap
5-1218MHz Hum and noise tested to ANSI/SCTE 16 2001 RF and power bypass capability Compatible with existing Regal Taps Available in faceplate only replacements Overview The Technetix OTRX series of Regal
NUT, BOLT, GASKET KITS*
PIPING PRODUCTS FLANGE BOLT ACCESSORIES NUT, BOLT, GASKET S* Non-Asbestos Gaskets Material: ASTM F Line Call Out: F70A9BE22KM Color: Green Thickness: / Min. / Max. Temperature: - F / 00 F Max. Operating
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers -
Any inquiries, please feel free to contact or Caledonian
Caledonian Low Voltage cables to IEC 60502 Standard www.caledonian-cables.co.uk www.caledonian-cables.net 1 Addison Company Profile Caledonian. established in 1978.offers one of the most complete lines
Service. Freudenberg NOK Sealing Technologies. Merkel Xpress
Service Freudenberg NOK Sealing Technologies Merkel Xpress Merkel Xpress Custom-Manufactured Seals Demanding projects often require high-quality seals without delay or hassle. Our Merkel Xpress sevice
Zurcon U-Cup RU /*"-8#+-8 " (&*$8 " %*+(+$4
Zurcon U-Cup RU9 Your Partner for Sealing Technology Trelleborg Sealing Solutions is a major international sealing force, uniquely placed to offer dedicated design and development from our market-leading
Polon Piston sealing set
The double-acting piston sealing set profile consists of a PTFE piston sealing ring and an elastomer O-Ring as a preloading element. Profile is particularly suitable for double-acting pistons in control
D X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium