Threaded Bar and Accessories
|
|
|
- Charles Cunningham
- 6 years ago
- Views:
Transcription
1 ed ar and ccessories old Rolled ed ar and ccessories pprox. Major ar Grade # # # #2 Nomal / 2 /4 / 5 2 / / / /2 64 /2 9 M. Net rea Thru s 2 ( 2 ) ed ar - Grade /0 * M. Ultimate () M. Yield () Nomal /ft (kg/m) pprox. Major Orientation old rolled threaded bars conform to the physical and chemical requirements of STM 6 Grade ksi Standard Specification for eformed arbon Steel ars for oncrete Reforcement * ontact your local Skyle Steel representative for formation on additional steel grades. pprox. Major Max. ength ft (m) ed ar - Grade 0 Nomal /4 / 2 /4 2 /2 M. Net rea Thru s 2 ( 2 ) M. Ultimate () M. Yield () Nomal /ft (kg/m) pprox. Major / 2.6 /2. 5/ / /4 2.6 ch to / ch diameter, STM 7; ch to ch diameter bar manufactured accordance with STM 7 physical and chemical requirements. Grade 0 ksi steel must not be subjected to localized heatg such as weldg, cuttg torch, or hot grdg. Please note: s we contuously improve the design of our products, product details are subject to change. ontact your sales representative for formation on hot dip galvanized and epoxy coated bars. Orientation Max. ength ft (m) Technical Hotle: engeerg@skylesteel.com
2 ed ar and ccessories old Rolled ed ar and ccessories ed ar onnectors Full oad Hex Nuts and Jam Nuts Full oad Hex Nut Jam Nut Grade ar Grade ar ar ar Full Jam # # #4 # # # #4 * ** #2** *Round collar nut available **Round collar nut with flats Grade 0 ar Grade 0 ar Nomal Nomal Full Jam /4 / 2 /4 2 / /4 / 2 /4 2 /2 * *Round collar nut with flats with outside diameter of 5" (27). Please note: s we contuously improve the design of our products, product details are subject to change. ontact your sales representative for formation on hot dip galvanized and epoxy coated hardware (available upon request). Technical Hotle: engeerg@skylesteel.com
3 ed ar and ccessories old Rolled ed ar and ccessories Hardened Washers Round eveled Washers EVE Grade ar Grade ar ar ar evel degrees # # #4 # # # # # Grade 0 ar Grade 0 ar Nomal Nomal evel degrees /4 / 2 /4 2 / /4 / 2 /4 2 / Please note: s we contuously improve the design of our products, product details are subject to change. ontact your local Skyle Steel representative for formation on additional steel grades. Technical Hotle: engeerg@skylesteel.com
4 ed ar and ccessories old Rolled ed ar and ccessories earg Plates HPE Plastic Nut aps* SETION earg plate dimensions reflect typical sizes. ctual design criteria should be used for specific plate sizg. SETION SETION SETION Grade ar Plastic Nut aps for Grade ars ar # # #4 # / / / ar # #4 #2 Nomal / * O rg seal base of cap nchor Nuts Plastic Nut aps for Grade 0 ars Grade 0 ar N Nomal Grade 0 nchor Nuts /4 / 2 /4 2 / /4. /2. 2 /2 6 2 / /4 / 2 / N kgs onsult your sales representative for availability of additional threads and grades. Please note: s we contuously improve the design of our products, product details are subject to change. Technical Hotle: engeerg@skylesteel.com
5 ed ar and ccessories old Rolled ed ar and ccessories Forged Eye orrosion Protection ed Portion E ed Portion F ar E F #4 # s on forged eye will be metric. onversion couplers available (transition) for all Skyle Steel thread forms. ontact your Skyle Steel sales representative for assistance with connection details. ll threaded bars can be supplied with a protective smooth-walled PV tube. While the standard PV tube is 0.05 ch thick, other options are available upon request. The followg additional corrosion protection options are available for all threaded bars: Sgle orrosion Protection (SP) ouble orrosion Protection (P) Transitional oupler for Forged Eye X Metric Form Y Skyle Steel Form Encapsulatg: Grease or Grout Epoxy oatg Galvanizg Patg Platg Tapg ar M56 # X.6 Y lb.4.4 Oversized accessories are provided to accoodate galvanized and coated bars. Please contact your Skyle Steel Geostructural Solutions Representative for recoendations on the system that will best suit your requirements. M M M M5 # Technical Hotle: engeerg@skylesteel.com
6 ed ar and ccessories Tie ars without rticulation Normal End s Upset Forged s Shaft Tensile Stress rea Yield apacity Ultimate apacity Gross rea Shaft Yield apacity Ultimate apacity Recoended esign apacity T g s Th y Th u g Sh y Sh u S* RF* , ,474 74,6 4.,7 50,559 2,0 2 9, , ,795 0,6 5.6,6 40,6 59 2,97 244,07, ,27 705,7 9 4, ,4 4,924 2,540 9,2 4, ,995,497,0 4, , ,9 5 2,96 297, 472 2, ,5 72,7, 5, , ,5 7,, , , ,27,9 5, ,6 6 2,7 42,7, , ,95,056 4,697,94 6, 9.6 6,2 7, 944 4,99 4, 669 2, ,274,5 5,7,524 6, ,2 7, 944 4,99 42,5 679, ,9, 5,596,66 7,.99 7,0 797,544,052 4, , 7, ,49,6 6,074,0, ,54,927, 5, ,5 9, ,,47 6,,950,6.42,9 97 4,0, 5,7 5 2,59 9 4, ,,594 7,0 2,4 9, ,50,06 4,2,4 6, ,0,0 4, ,6,7 7,62 2,4, ,50,06 4,2,4 6, ,,0 4, ,70,40,5 2,429,04 6.,7,6 5,9,54 6,55 699,,9 4, ,524,970,2 2,0, ,,27 5,5,67 7,4,, 5, , 2,4 9,5 2,777 2, ,272,79 6,,2,099,674, 5, ,94 2,242 9,974 2,9,66.,27,492 6,67,969,7,950,47 6,05 The recoended design capacities are based on IS/S and SHTO/RF design methodologies for steel structures and retag walls. n additional reduction factors from EN99-5 are applied to the tie-rods based on their ability to articulate. Technical Hotle: engeerg@skylesteel.com
7 ed ar and ccessories Tie ars with rticulation Forged Eye Forged Spherical End ed and Spherical Nut Shaft Tensile Stress rea Yield apacity Ultimate apacity Gross rea Shaft Yield apacity Ultimate apacity Recoended esign apacity T g s Th y Th u g Sh y Sh u S* RF* , ,474 74, , ,9 5 2,96 297, 472 2, , ,795 0, , ,5 7,, , ,27 705,7 9 4,40.0 5,6 6 2,7 42,7 2, , ,995,497,0 4, ,2 7, 944 4,99 42,5 679, ,5 72,7, 5,9.99 7,0 797,544,052 4, , 7, , ,27,9 5, ,54,927, 5, ,5 9, ,95,056 4,697,94 6,.42,9 97 4,0, 5,7 5 2,59 9 4, ,274,5 5,7,524 6, ,50,06 4,2,4 6, ,,0 4, ,9, 5,596,66 7, 6.,7,6 5,9,54 6,55 699,,9 4, ,49,6 6,074,0,0 7.5,,27 5,5,67 7,4,, 5, ,,47 6,,950, ,272,79 6,,2,099,674, 5, ,,594 7,0 2,4 9,59.,27,492 6,67,969,7 9,974,47 6, ,6,7 7,62 2,4, ,4,9 7,7 2,24 9, ,,52 6, ,70,40,5 2,429,04 2.6,94,70 7,697 2,24,,0 4,9,644 7, ,524,970,2 2,0,566. 6,5,56,6 2,0,99, 4,944, 7, , 2,4 9,5 2,777 2, ,67,96, 2,6,66,9 5,29,7, ,94 2,242 9,974 2,9,66 29.,69 2,2 9,45 2,00 2,4,270 5,649 2,0,96 The recoended design capacities are based on IS/S and SHTO/RF design methodologies for steel structures and retag walls. n additional reduction factors from EN99-5 are applied to the tie-rods based on their ability to articulate. Technical Hotle: engeerg@skylesteel.com
8 ed ar and ccessories Hot Rolled ed ar and ccessories pprox. Major Hot Rolled ed ar Grade /0 STM 6 ar Grade Nomal M. Net rea Thru s 2 ( 2 ) M. Ultimate () M. Yield () Nomal /ft (kg/m) pprox. Major Orientation Max. ength ft (m) # #7 7/ / # -/ # -/ # Hot rolled threaded bars conform (Excludg the requirement of: legibly rolled surface markgs. ) to the requirements of STM 6 Grade ksi (5 Mpa) Standard Specification for eformed arbon Steel ars for oncrete Reforcement ontact your sales representative for formation on hot dip galvanized and epoxy coated bars. Please note: s we contuously improve the design of our products, product details are subject to change. Technical Hotle: engeerg@skylesteel.com
9 ed ar and ccessories Hot Rolled ed ar and ccessories ouplers Hex Nuts (Full oad and Jam Nuts) Hex Nut Jam Nut Grade STM 6, Grade STM 6, ar Nomal ar Nomal Full Jam #6 #7 # # #4 7/ -/ 2 -/4 -/ #6 #7 # # #4 7/ -/ 2 -/4 -/ Hardened Washers eveled Washers Grade STM F 4 Grade F 4, ar Nomal ar Nomal evel degrees #6 #7 # # #4 7/ -/ 2 -/4 -/ #6 #7 # # #4 7/ -/ 2 -/4 -/ Please note: s we contuously improve the design of our products, product details are subject to change. Technical Hotle: engeerg@skylesteel.com
SEE VICTAULIC PUBLICATION FOR DETAILS
dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table
Technical Product Manual
Technical Product Manual 2017 Edition Unmatched Product Range Material Availability Manufacturg Capabilities Innovative Applications and Engeerg Expertise Your True Project Partner Unmatched Product Range
229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
Axial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
Brand S Nuts - Metric Mating Screw Recommended Tightening Torque, (N m) S-M2-0ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-1ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-2ZI 2.53 1220 0.15
Series 1 Steel - Straight Sections
- Straight Sections H-1 -Line series able Systems - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding system in this catalog is designed
Axial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
Brand S Nuts - Unified S-256-0ZI 665 180 2.6 2.9 4.1 5.8 7.3 S-256-1ZI 665 180 2.7 3.1 4.4 6.2 7.7 S-256-2ZI 665 180 2.7 3.1 4.4 6.2 7.7 S-348-0ZI 800 180 3.8 4.3 6.1 8.6 11 S-348-1ZI 875 180 4.1 4.7 6.6
Pipe Hangers. 47 B-Line series Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
Pioneering Geo-Support Solutions. CTS Hot Rolled Thread Bar (HRTB) Made in the USA
Pioneering Geo-Support Solutions CTS Hot Rolled Thread Bar (HRTB) Made in the USA Contents: Cover Company Profile... Page 2 Hot Rolled Thread Bar Advantages... Page 3 Our Committment/Applications... Page
P Series Puller 1000 and 2000 lb Capacity
P Series Puller 1000 and 2000 lb apacity eatures / Wire Puller: 4:1 design factor. Meets SM 30.21. Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. ll steel parts
Pipe Hangers. Pipe Hangers. Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
Series 1 Steel - Straight Sections
LST-1 able Systems - Straight Sections How The Service dvisor Works -Line knows that your time is important! That s why the color-coding system in this catalog is designed to help you select products that
Linear Alignment Coupler. Flange Couplers and Weld Plates. Spherical Rod Accessories. Milwaukee Cylinder provides various cylinder accessories to
ylinder ccessories Page Linear lignment oupler MLOK Rod lamp Flange ouplers and Weld Plates Spherical Rod ccessories 19 150-151 15 15 Milwaukee ylinder provides various cylinder accessories to maximize
Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
ELECTRICAL ACCESSORIES FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
ELECTRICL CCESSORIES FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Electrical Fittings Receptacles Fixture Hangers ccessories and Connectors Junction Boxes In-Channel Joiners Swivel Hangers Cable Entrance Tubing
Channel Cable Tray - Accessories & Fittings
hannel able Tray - Straight Sections E-1 -Line series able Tray Systems hannel able Tray - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding
MILD STEEL FLATS. Size (mm)
Page 6 MILD STEEL FLATS Product Shortname: FL W t Specifications: AS3679-300 AS3679-350 (on indent only) JIS G3101-SS400 Range Available: 13 x 3 0.31 16 x 3 0.38 16 x 6 0.75 20 x 3 0.47 20 x 5 0.79 20
Titan Flow Control, Inc. Your pipeline to the future!
Titan Flow ontrol, Inc. Your pipele to the future! Series F 75 Wafer > ast Iron Series F 76 ug > uctile Iron esigned accordance with: MSS-S-67 & I 609 olor oded: Orange ody is M Seat lue ody is una-n Seat
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
Industrial Lifting Equipment
Industrial Lifting quipment VL2 Premium Series Manual hain Hoist 1/2 20 metric ton Lifting apacity eatures: Our top of the line manual chain hoist, the VL2 Series exclusive hand chain guide provides smooth,
RC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.
R-Series UO ylinders, Single-cting Shown from left to right: R-506, R-50, R-2510, R-4, R-10010, R-55, R-1010 The Industry Standard General Purpose ylinder s ll R cylinders are equipped with hardened removable
LEADING U.S.A. MANUFACTURER OF FORGED INDUSTRIAL HARDWARE AND CUSTOM FORGINGS
ommitted to Quality and Total ustomer Satisfaction WHO WE RE LEDING U.S.. MNUFTURER OF FORGED INDUSTRIL HRDWRE ND USTOM FORGINGS MISSION STTEMENT The ustomer Is First Ken Forging, Inc. is committed to
Piling Product Guide Edition. Servicesteel.org
Piling Product Guide 2017 Edition Strong Foundations Starith Service Steel Service Steel Supplies All Your Foundation Products You Are Our Number One Priority From industry leading steel sheet piling to
Series 1 Steel - Straight Sections
Series 1 Steel - Straight Sections Series 1 Steel H-1 B-Line series Cable Tray Systems Series 1 Steel - ccessories & Fittings Series 1 Steel How The Service dvisor Works We know that your time is important!
L & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
Dimensional Data Clevis / Brackets / Pins / rod Eyes
Dimensional Data levis / Brackets / Pins / rod yes W B W +.00 +.00 rod LVIS R KK THRD Load (tension) (lbs) Size Part # ode KK B R W R Part # ode 15-7-1001 101,80 7/16-0 / 11/ / 1/ 11/ 1/ 1/ 5/8 15-7-1001
Bike Bollard R-7904 (RSA)
ike ollard R-0 (RS) General escription: The R-0 ike ollard offers versatile design and functionality. ike-locking arms are bolted internally to applications. R-0 ike ollards are made from carbon steel
Product Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
Combination Clutch/Brake
ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive
Section 6 Feet & Casters
atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30
Technical Product Manual
Technical Product Manual 2019 EDITION Unmatched Product Range Material Availability Manufacturg Capabilities Innovative Applications and Engeerg Expertise Your True Project Partner Unmatched Product Range
Cable & Wire Management
Cable & ire Management ay-in ireway Data Sheet Cable & ire Management pplication ouses runs of control and power cable Protects against circulating dust, falling dirt and dripping noncorrosive liquids
Teknic ClearPath. Integral Horsepower Motors & Accessories D1198/B. ClearPath Integral HP Motors & Accessories
Teknic ClearPath NEM 56 Page 2 Foot Mount Kit Page 6 NEM 143/145 Page 3 IEC D100 Page 4 Regenerated Energy Shunt Page 7 and contain proprietary information. Blower Kit Page 5 Integral Horsepower Motors
LEADING U.S.A. MANUFACTURER OF FORGED INDUSTRIAL HARDWARE AND CUSTOM FORGINGS
PRIE TLOG ommitted to Quality and Total ustomer Satisfaction WHO WE RE LEDING U.S.. MNUFTURER OF FORGED INDUSTRIL HRDWRE ND USTOM FORGINGS MISSION STTEMENT The ustomer Is First Ken Forging, Inc. is committed
CTSCL-10. Steel Cable Ladder Cable Support Systems
TSL-10 Steel able Ladder able Support Systems Tray onstruction I-Beam Side Rails ooper B-Line s I-Beam siderails are an integral part of all 2, 3, 4, and 5 series ladder trays. The I-Beam is ideal for
Fleet-Lift System Components
The ayton Superior Fleet-Lift System comprises two main parts, the Fleet-Lift nchor and the Fleet-Lift Ring lutch. The design of the system allows loads to be applied from any direction. Fleet-Lift System
Pneumatic Quick Couplings
Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single
S-SERIES Translating Screw Jack 50kN
Translating Screw Jack 50kN Performance ST050 Screw Jack Model 4 S-050 apacity kn 50 ead Screw 1 iameter (mm) 40 ead (mm) 9 18 Option 1 6:1 ear Ratios Option 2 24:1 Option 3 8:1 (OR) 4 x Turns of worm
Section 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
Tugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
Series 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
HTTF Transit Time Ultrasonic Flow Meter
Installation onsiderations imensional Specifications 1. Select the optimum mounting location on the piping system a full pipe with at least 10 straight pipe diameters upstream and 5 pipe diameters downstream
Rex 881 TableTop Chain Side-flexing
Prefix S SS 881 Cha Information Cha M. Side-flex pproximate Weight desc /ft / m 3-1/4 3.25 82. 6 18.00 7. 2 2.00 2.97 4-1/2 4. 1 3 00 609. 6 2. 3.71 7-1/2 7. 19 5 00 609. 6 3.70 5.49 Cha Carbon Staless
YSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
Offshore Drilling & Pipeline Equipment
Offshore rilling & Pipeline Equipment www.ivp-solutions.com Edition 01/15 High Pressure Manifold Fittings +44 (0)191 260 0150 www.ivp-solutions.com 2014. Integrated Valve & Piping Solutions Ltd is registered
Horizontal Flat Bottom Drag Conveyors 17 Series 26 Series 33 Series
Horizontal Flat Bottom Drag Conveyors 17 Series 26 Series 33 Series 17 Series 26 Series Made in the USA 33 Series OUR MISSION: To provide innovative quality solutions that create an extraordinary customer
16 - Swivels & Joining Links
16 - Swivels & Joining inks Quicklinks - Stainless Stainless "C" inks 316 grade stainless steel. n alternative to shackles or snaps allowing quick entry via a threaded hexagon locking nut. S 1 R S S..
General Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
General Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
Pipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
Table of Contents. Numatics 2009 Rev. 1/09
Table of ontents RW Series...-8 eatures and Benefits... How To Order... Replacement omponents... imensions... 5 Technical Specifications... 6 Switch Information....7-8 Numatics 2009 Rev. /09 2 RW-Series
DYWIDAG Marine Tie Rods Smooth Bars & Walings
DYWIDAG Marine Tie Rods Smooth Bars & Walings 2 Contents General Information... 4 Fields of Applications... 4 Overview of Steel Grades... 5 Steel Properties... 5 Thread Creation... 6 Key Advantages of
Model R. q Fig. 81-H: Standard Type: q A, q B, q C, q D, q E, q F. q Fig. C-81-H: Corrosion Resistant CONSTANT SUPPORTS.
OSA SUPPORS odel R q Fig. 81-: Standard : q A, q, q, q, q, q F q Fig. -81-: orrosion Resistant : q A, q, q, q, q, q F onstant Support Finish: Standard finish; painted with semi gloss primer. orrosion resistant;
P Series Puller 1000 and 2000 lb Capacity
P Series Puller 1000 and 2000 lb Capacity Features / Wire Puller: 4:1 design factor. Meets SM 30.21. Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. ll steel parts
SPECIFICATION DATA. PIPE COVERING PROTECTION SADDLE #70 (1" Insulation) # 94/95 # 93 COVERING (LBS.) 3/4 1 9/ /16 2 1/2 7/ /16 5 3/8
PIPE OVERING PROTETION SALE #70 (1" Insulation) 3/4" through " arbon Steel omplies with MSS SP- and MSS SP-9 (Type 39). esigned to protect pipe insulation from crushing, enter rib starts at " IP IRON PIPE
Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
DONGKANG METAL DONGKANG MET
DONGKNG METL ontents 4 5 6 8 9 0 3 30 38 4 50 5 53 54 58 59 60 6 6 63 64 65 66 67 68 70 70 7 Message, Organization ompany History Machg & Facilities Machg & Testg Product Information Product Valve List
Series 1 Steel - Accessories
- ccessories Standard (L-Shaped) Splice Plates One pair including hardware provided with each section. Prepackaged in pairs in a plastic bag, with hardware. 4-hole pattern L-shaped splice plates. L-shaped
Series 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
210C-1 21 MPa double-acting type hydraulic cylinder
17 2-1 21 MPa double-acting type hydraulic cylinder ompact design hydraulic cylinder at 21MPa. 21 MPa double-acting hydraulic cylinder with bores from 4 mm to 2 mm. Inovation of design scrutinized carefully
Pipe Hangers and Supports
November 20 or the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com. Hangers and U I L I N G O N N E T I O N S T H T L S T UILING ONNETIONS THT LST
PIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables 2 40 4 44 MTERIL Unistrut pipe supports, unless
Adhesive mounting base. Mounting Method Accessory Type Advantages Disadvantages Remarks. Allows stud mounting, provides electrical isolation
ccessories Mounting ccessories for cceleration Sensors Type 84... 85... The most important consideration when installing an accelerometer on a test structure is to have a quality mounting surface for attachment.
CONTENTS. Type E/DOUBLE-INTERLOCK /Type K/TAF
ONTENTS Type E/DOUBE-INTEROK /Type K/TF Features / Benefits Type E....................................................... B6-3 DOUBE-INTEROK & Type K.................................. B6-5 TF.........................................................
FT SERIES. FT Series Linear Actuators
T SRS OR ROR SRW TUTOR Mount virtually any servo motor ong stroke lengths available igh speed and long life Motors shown in drawings are for illustrative purposes only and are not included with T ctuators.
hydraulic power clamps
hydraulic power clamps Table of ontents lick Page # View ydraulic lamping Page M-Y-# ydraulic lamping Page M-Y-# 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 3-4 3-1-S-475 3-1--475
Ammeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
TURNBUCKLE RANGE OPEN BODY. Product Catalogue. High Performance. Forged Chrome Bronze. Turnbuckles & Terminals
OPEN BODY TURNBUKE RNGE 2012 Product atalogue High Performance Forged hrome Bronze Turnbuckles & Terminals REGTT FORGED HROME BRONZE RIGGING SREW aser etched unique ID for traceability Infinity design
Piston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
Helical Hydraulic Rotary Actuators
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
Quadro Aluminum Worm Gear Reducers
Quadro luminum Worm Gear educers egal rand riven to be the est Quadro luminum Worm Gear educers dvantages ompact and lightweight aluminum alloy housing is up to one third smaller than alternatives deal
Manufacturing Standards
HEK VLVE heck Valve pplication Swg check valves are designed to close quickly and automatically with positive shut off either horizontal or vertical (flow up) pipe runs. Inherently, swg check valves have
Series 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
10. Universal Clips. 254 Product overview 2013 We reserve the right to change designs and technical specifications of our products.
10. Universal lips Whether you need ceiling, wall or floor mounted clips, Flamco has the solution. We offer a wide range of universal mounting clips with a variety of closures, connections and finishes.
GP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
Crossed Roller Bearing Positioners
rossed Roller earing Positioners Parker Daedal precision crossed roller stages provide controlled, precise point-to-point positioning along a linear axis. Stages are comprised of two basic components:
Inline, Ceiling and Sidewall Exhaust
SP, SP 38 Inline, eiling and Sidewall xhaust SP SP UL/cUL 507-33599 - eiling xhaust Fans SP-390 and smaller and SP- are UL/cUL Listed for above bathtub/shower with GFI branch protected circuit. SP- is
RADIOFLECT. passive repeaters page 46
RDIOFLET passive repeaters page 46 RDIOFLET passive repeaters This range of calzavara products forms part of an interesting technical solution to supply and install microwave radio links, in areas where
hydraulic power clamps
ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic Pneumatic lectrical Mechanical (8) 426-548 www.cmafh.com hydraulic power clamps Table of ontents ydraulic lamping 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4
Hydraulic Systems Hydraulic Clamping
ydraulic Systems 19. 1 ydraulic lamping Page ydraulic lamping Page 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 19.2-19.3 3-1-S-475 3-1--475 19.6 52-Series 19.3 3-1-S-11 19.7 3-1--11
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit 71 I Fuse 105 Electrofusion Processor The IntegriFuse I Fuse 105 Electrofusion Processor is the next generation
SV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic
atalog 0923/NA (10/01) Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic P1A range of cylinders is intended
H T STD STD STD
Ejector Pins Nitrided - Shoulder Inch Material AISI: H13 1.2344 D S Cat. No. 6 10 14 H T STD. +.005 STD. +.005 STD. +.005 1/32 1/2 EP03 06-1/2 065-1/2 2 EP03 06-2 10-2 105-2 1/4 1/8 1/2 EP04 06-1/2 10-1/2
PART NUMBER POLE DIAMETER RANGE CARTON QTY " to 5" " to 6 3 4" " to 7 3 4" " to 8 3 4" 10
PH1 Offset Pole Band Bands Single Double Offset Pole Bands are used for dead-ending, guying, and mounting secondary racks on metal poles, pipe masts, or conduit. Each Pole Band Assembly contains two 1
Ford Super Duty Recoil Traction Bar System. Part#: ,123409
Part#: 123418,123409 Ford Super Duty Recoil Traction Bar System Rev. 011017 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-279-2135 Web/live chat: www.bds-suspension.com. E-mail: tech-bds@sporttruckusainc.com
Adhesive mounting base. Mounting Method Accessory Type Advantages Disadvantages Remarks. Allows stud mounting, provides electrical isolation
ccessories Mounting ccessories for cceleration Sensors Type 84... 85... The most important consideration when installing an accelerometer on a test structure is to have a quality mounting surface for attachment.
Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
General Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
B-1. Hanger Kits... B-1 thru B-4. U-Bolt Kits...B-5. Springs... B-6 thru B-9. Hardware... B-10 thru B-11. Equalizer Bars...B-12
XLES & RKES & & ODY JKS & RKE ONTROL Hanger Kits... -1 thru -4 U-olt Kits...-5 Springs... -6 thru -9 Hardware... -10 thru -11 Equalizer ars...-12 HRDWRE & MRINE Spring Hangers... -13 thru -14 Heavy Duty
M/s Eiffel Building Material Trading L.L.C. Al Quos Dubai. M/s Golden Tools Trading Riyadh- Saudi Arabia. M/s New Chrome Fasteners Oman
We are please to introduce ourselves as the manufacturers of Threaded Rods Zinc Plated, Plain, Hot Dip Galvanized and Stainless Steel grade 04/6, Anchor bolts/foundation Bolts, Expansion bolts, U bolts,
Helical Hydraulic Rotary Actuators. we carry the load.
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
Titan Flow Control, Inc. Your pipeline to the future!
TITN Titan Flow ontrol, Inc. Your pipele to the future! eries F 75 Wafer > ast Iron eries F 76 ug > uctile Iron esigned accordance with: M--67 & I 609 olor oded: Orange ody is M eat lue ody is una-n eat
GM (single type) GM-W (double-wide type) GMF-W (round flange double-wide type)
Nippon Bearing has expanded the new generation GM Slide Bush series to now include the popular ouble-ide and Flange Types to provide an even wider selection of products. GM (single type) GM- (double-wide
NEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
Large. Bespoke. Diameter. Fittings to Suit any Pipe Specification
Bespoke Large Fittings to Suit any Specification pipe ONNEIONS, repair & flow control products for the utilities industry Large Overview Robust, Reliable, Proven Solution for New Lay s ustomer Design Liaison
TERRATORQUE HELICAL ANCHORS AND HELICAL PILING PRODUCT CATALOG
TERRATORQUE HELICAL ANCHORS AND HELICAL PILING PRODUCT CATALOG INTRODUCTION TerraTorque offers quality helical anchors and helical piling to industry. Our products are available in square shaft (type TS)
G43 Welded Assembly. G43 Clevis Assemblies
Chain & Assemblies 43 Chain r-43, commonly called igh Test, is manufactured to meet ASTM & NACM. Typical uses include container securement, logging, towing, and marine industry. r-43 is available in many