Thin Wall Conduit Fittings (for EMT Conduit)
|
|
|
- Arleen Cobb
- 6 years ago
- Views:
Transcription
1 Set Screw Type Fittings FITTINGS conduit fittings are used: Standard Materials and Finishes: Straight Connectors Non-insulated Couplings 450SUS 1 / US / US US 1 / US 1 / US US 2 1 / US 6 458US 1 / US 4 Straight Connectors Insulated 1450US 1 / US / US US 1 / US 1 / US US 2 1 / US US 1 / US 4 460US 1 / US / US US 1 / US 1 / US US 2 1 / US US 1 / US US: CAN: Copyright 2015 Commercial Products Catalog
2 Compression Type Fittings FITTINGS conduit fittings are used: Connectors Non-insulated Couplings 650SUS 1 651SUS 652US US 1 / US 1 / US US 2 1 / US 658US 1 /2 659US Standard Materials and Finishes: Connectors Insulated 1650US US 1652US US 1 / US 1 / US US 2 1 / US 1658US 1 /2 1659US SUS 1 661SUS / US US 1 / US 1 / US US 2 1 / US US 1 / US US: CAN: Copyright 2015 Commercial Products Catalog
3 Compression Type Fittings Raintight FITTINGS conduit fittings are used: Connectors Non-insulated Raintight Couplings Raintight 650RTUS 1 651RTUS 652RTUS RTUS 1 / RTUS 1 / RTUS RTUS 2 1 / RTUS 1 658RTUS 1 / RTUS Standard Materials and Finishes: Connectors Insulated Raintight 660RTUS 1 661RTUS / RTUS RTUS 1 / RTUS 1 / RTUS RTUS 2 1 / RTUS RTUS 1 / RTUS RTUS RTUS 1652RTUS RTUS 1 / RTUS 1 / RTUS RTUS 2 1 / RTUS RTUS 1 / RTUS US: CAN: Copyright 2015 Commercial Products Catalog
4 Conduit Fittings STRAPS STEEL GALVANIZED Two Hole NAILING STRAPS STAMPED STEEL Standard Material: CLAMPS STEEL 497 1US 1 / US / US US 1 / US 1 / US Conduit NSS1US 1 / NSS2US / NSS3US Dimensions (in Inches): A B C Radius NSS1US NSS2US NSS3US B RADIUS A C 200US 1 / US / US US* 1 / US* 1 / US* US* 2 1 / US* US* 1 / US* US: CAN: Copyright 2015 Commercial Products Catalog 165
5 Rigid/Intermediate Grade Conduit Fittings Conduit Fittings THREE-PIECE CONDUIT COUPLINGS STEEL Standard Material: STRAPS STEEL GALVANIZED Two Hole Standard Finish: Steel CONDUIT LOCKNUTS STEEL 190US 1 / US / US US 1 / US 1 / US USA 1 / USA / USA USA 1 / USA 1 / USA CLAMPS STEEL 496 3US 1 / US / US US 1 / US 1 / US US 2 1 / US US 1 / US US 1 / US / US US 1 / US 1 / US BEAM CLAMPS/INSULATOR SUPPORTS STEEL Base Jaw Tapped Opening Holes 529SUS /4 5 /8 1 / US: CAN: Copyright 2015 Commercial Products Catalog
6 Rigid/Intermediate Grade Conduit Fittings Conduit Fittings TYPE CPR COMPRESSION FITTINGS Straight Connectors Non-insulated Couplings CPR1US 1 /2 25 CPR2US / CPR3US 1 5 CPR4US 1 / CPR5US 1 / CPR6US Standard Materials: CABLE AND CONDUIT HANGERS STEEL CPR21US 1 / CPR22US / CPR23US CPR24US 1 / CPR25US 1 / CPR26US Straight Connectors Insulated With Bolt CPR11US 1 /2 25 CPR12US / CPR13US 1 5 CPR14US 1 / CPR15US 1 / CPR16US Conduit US: CAN: Copyright 2015 Commercial Products Catalog EMT Rigid 0BUS 1 /2 /8 and 1 / BUS /4 / BUS /2BUS 1 / BUS 1 /2 1 1 / BUS 1 1 / BUS BUS 2 1 /2 2 1 / BUS 25 8BUS 1 /2 1 /2 10 9BUS
Thin Wall Conduit Fittings (For EMT Conduit)
Set Screw Type Fittings - Product of the USA FITTINGS To join EMT to a box or enclosure To couple two ends of EMT conduit Straight Connectors Non-Insulated Features: All connectors available with or without
Commercial Products. New Products in the Commercial Products Product Line
Commercial Products Section A complete solution combining reliability and expertise in every product, providing you with labor and maintenance savings, simplified installation, and improved productivity
W-Series Junction Boxes
W-Series Junction Boxes Application and Selection Junction boxes, designed for hazardous and non-hazardous locations, are used in a variety of industries to perform the following functions: As a pull box
Stainless Steel Fittings
Locknuts & Bushings LOCKNUTS Eaton's Crouse-Hinds Stainless Steel Fittings deliver unbeatable corrosion protection where you need it, saving you time and money throughout the life of your facility. Superior
CP Myers Hubs. Class I, Div. 2 Class II, Div. 1 and 2 Class III. when installed in accordance with the NEC. Features. Material.
Myers Hubs Class I, Div. 2 Class II, Div. 1 and 2 Class III when installed in accordance with the NEC. CP Myers Scru-tite TM and Ground hub are used in the termination of electrical circuits through wall
KNOCKOUTS Cat. # Bracket Plastic Clamp Conduit Cable Unit Qty. Wt. Lbs. Per 100 TP100 TP104 TP106 TP114
1" DEEP - NON-GANGABLE - 6.5 CUBIC INCH CAPACITY 1 15 /16" WIDE x 3 3 /4" LONG TP101 TP103 Cat. # Bracket Plastic Clamp Conduit Cable Unit Qty. Wt. Lbs. Per 100 TP101 "S" No 1 1 /2" 2 25 38 TP103 "S" Yes
Rigid Metal Conduit, IMC or EMT K-Clamps
65178 Rigid Metal Conduit, IMC or EMT K-Clamps Wt. Lbs. Std. Catalog No. Size (In.) Per 100 Pkg. Right Angle Type Right Angle Type Hot Dip/Mechanically Galvanized* For Rigid, IMC, EMT PC-50RA 1/2 37.0
320A Single Phase URD Meter Loop Installations
320A Single Phase URD Meter Loop Installations Location: The meter loop shall be mounted on the side of the pedestal facing the consumer's lot. (The side being one of the four flat surfaces of the pedestal
Product Specification Guide Expansion and Deflection Couplings. SECTION Raceway and Boxes for Electrical Systems
Product Specification Guide Expansion and Deflection Couplings SECTION 26 05 33 Raceway and Boxes for Electrical Systems Specifier Notes: Delete any information below in Parts 1, 2 or 3 which is not required
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
UL Listed TP408. KNOCKOUTS Cat. # Bracket Description Sides Bottom Unit Qty. Wt. Lbs. Per 100
4" SQUARE OUTLET BOXES AND COVERS Features: Applications: For use with conduit Available in red for fire alarm applications Ideal for exposed work applications, providing an easy method for the installation
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
Switch & Outlet Boxes Technical Data
Switch & Outlet Boxes Technical Data General Information: A box, with or without a bracket or bar hanger, intended for support of a fixture/luminaire weighing 50 lbs. or less is marked FOR FIXTURE/ LUMINAIRE
Condulet Conduit Bodies and Outlet Boxes Hazardous
Condulet Conduit Bodies and Outlet Boxes Hazardous 4F Description Page No. Application/Selection 48, 49 Lubricants HTL 59 STL 59 Conduit Bodies & Outlet Boxes Cylindrical EKC 57 90 Elbow LBH 58 LBY 58
Product Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
In This Section. and. Fittings & Non-Metallic Rigid Conduit Fittings and Accessories. Steel City Fittings
In This Section and Steel City Overview...F-2 F-3 Thinwall Conduit (EMT)...F-4 F-9 Rigid/Intermediate Grade Conduit...F-0 7 Flexible Cord and Power Cable Connectors...F-8 Liquidtight Flexible Metal Conduit
EDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDSC210 -Way Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type Contact Configuration Current Rating Voltage Rating Material, Color, and
Beam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
4 Square Partition Square Cut Tile Wall 2 Gang Cover 2 1/8 Deep 1/2 to 1 RSD
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 TP862 4IN SQ Box Partition Cooper Crouse-Hinds Catalog Number Manufacturer Weight per unit Product Category Features Material
EDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. &, Groups B*, C, D Cl. II, Div., Groups E, F, G Cl. II, Div., Groups F, G NEMA, 7B*CD, 9EFG Applications:
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDS2274 Pos D.E. Selector Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type SINGLE GANG Contact Configuration 4NO-4NC Number of Circuits
Armoured Cable/Flex. Conduit
Armoured Cable/Flex. Conduit Connectors Fittings & Accessories Grounding Trade Clamping Range Suggested Application Flex. Cat. No. Size min. max. AC90 (BX) Conduit CI70 CI71 / CI73 CI2210 / CI2236 L-16
The parts you need are the parts we have.
When customers need a part that you don t have and the manufacturer can t deliver in time... That s when you call All Current. PART NEEDED PART NEEDED SORRY? CALL The parts you need are the parts we have.
EC&N. Elbows, Couplings & Nipples
EC&N Elbows, Couplings & Nipples ELBOWS, COUPLINGS & NIPPLES Superior physical protection for electrical conductors Established in 1877, Wheatland Tube is the only conduit manufacturer that also produces
Enclosures. Section E
Enclosures Section E Enclosures and junction boxes built and configured to meet the requirements of the most demanding hazardous areas and industrial environmental applications across the globe. E Enclosures
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)
![ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)](/thumbs/86/93535574.jpg "ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)")
804 South Street 75964-726, TX Nacogdoches Phone: 96-569-794 Fax: 96-560-4685 EDS25 -Gang Start/Stop Station Cooper Crouse-Hinds Catalog Number Manufacturer Weight per unit Product Category Features Assembly/Kit
The parts you need are the parts we have.
When customers need a part that you don t have and the manufacturer can t deliver in time... That s when you call All Current. PART NEEDED PART NEEDED SORRY? CALL Corporate Headquarters 2500 McClellan
EDS / EFS Series Control Stations
EDS / EFS Series Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures are installed
Series 1 Steel - Accessories
- ccessories Standard (L-Shaped) Splice Plates One pair including hardware provided with each section. Prepackaged in pairs in a plastic bag, with hardware. 4-hole pattern L-shaped splice plates. L-shaped
Customer Requirements Meter Socket Configurations
Application Information on meter socket configurations available from Tacoma Power. For enclosed meter pedestals, see standard C-MR-0020 Customer Requirements, Enclosed Meter Pedestal. General Requirements
TG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices
TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,
Aluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch
Easy assembly with standard tools. Fully insulated for direct mounting to steel panels
Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series and Receptacles are the proven industry standard
GSC CONDUIT FITTING SOLUTIONS PRODUCT CATALOG
PRODUCT CATALOG INDEX EMT CONDUIT FITTINGS EMT STRAP (ONE HOLE) P-1 CONDUIT OUTLET BOX COVER P-9 EMT STRAP ( TWO HOLE) P-1 CONDUIT OUTLET BOX TYPE GUA P-9 EMT CONNECTOR P-1 CONDUIT OUTLET BOX TYPE GUAT
U-18. Company furnishes and installs: 10. Service lateral and connectors. 11. Conduit package, Amperes.
SERVICE TERMINATION IN A TERMINATION COMPARTMENT DIRECT BURIED OR CONCRETE ENCASED LATERAL ALL 1-PHASE VOLTAGES, 400-800 AMPERES ALL 3-PHASE VOLTAGES, 400-3000 AMPERES ONLY Obtain acceptance for 1-phase
PRODUCT CATALOG. 2010, Halex/Scott Fetzer Company TABLE OF CONTENTS. LIQUID Liquid-Tight Conduit Fittings
Electrical Metallic Tubing Fittings MC & C Cable & Flexible Metallic Conduit Fittings Non-Metallic Sheathed Cable Fittings Liquid-Tight Conduit Fittings Rigid & Intermediate Metallic Conduit Fittings Service
Wheatland Tube Company
Rigid Steel Conduit Hot-Dip Galvanized Rigid Nipples Elbows Couplings Running Thread Electrical Metallic Tubing (EMT) Elbows Rigid Aluminum Conduit Nipples Elbows Couplings Intermediate Metal Conduit (IMC)
Conduit Bushings for Rigid Metal Conduit and IMC
Applications Used with a locknut to terminate rigid metal conduit or IMC conduit to a box or enclosure. Features Provides a smooth pulling surface. Material/Finish BU: malleable iron/zinc electroplated
Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
Liquid Tight. Liquid Tight Connectors Reusable Fittings. Straight Connectors. Straight Connectors with Insulated Throat
Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing washer Bonds conduit to box or enclosure Corrosion resistant
Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
Number Tube I.P.S. Rod Size or O.D. Range Cable H J W
TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel
CABINET - CURRENT TRANSFORMER Indoor - Outdoor 240 Volts Amperes Maximum
PAGE 1 OF 5 USE: 1. For commercial and industrial installations, purchased and installed by customer. 2. For use on the following services: 1 phase 3 wire 240 volts, 3 phase 3 wire 240 volts, 3 phase 4
STANDARD PIPE CLAMP FIG. 520 & 521
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod
Specification Grade Insulated Bushings...DA1 Specification Grade Insulated Grounding Bushings...DA2-DA4. Insulating Bushings & Couplings...
SECTION D INDEX Product Description Page Number Specification Grade Insulated Bushings.....................DA Specification Grade Insulated Grounding Bushings........DA2-DA4 Insulating Bushings & Couplings.......................DA-DA6
Electrical Fittings & Supplies
Electrical Fittings & Supplies 12802 Commodity Place Tampa, FL 33626 813-664-9700 www.atlanticind.net The Atlantic Story Atlantic Industrial LLC, a division of QSSI, Inc., is an Americanowned and operated
GHG43 Series Control Stations
GHG43 Series Control Stations Nonmetallic or 316L Stainless Steel UL/cUL listed Cl. I, Div. 2, Groups A, B, C, D Cl. I, Zones 1 and 2, (A) Ex de IIB + H2 T6 Cl. II, Div. 1, Groups E, F, G (cul) PTB ATEX
Pauluhn ZPL explosionproof LED luminaires For drilling and marine applications
Pauluhn ZPL explosionproof linear LEDs are designed to replace fluorescent T12, T8 and T5HO lighting on marine vessels and land-based and offshore drilling platforms. The rugged and durable design features
Kindorf Stainless Steel Modular Framing System
In this section... Kindorf Stainless Steel Modular Framing System Kindorf Stainless Steel Modular Framing System Overview... 6 Channels, Straps and Clamps... 7 Channel Fittings and Hardware...8 44 Overview
PO Box 847 Greensburg, PA Phone (724) Fax (724) /0
PO Box 847 Greensburg, PA 15601-0847 Phone (724) 838-8320 Fax (724) 838-1544 All Stainless Steel All In Stock www.gibsonstainless.com Price List 114 7/01/08 1/1/16 PRICE LIST 118 Contents Item...Page Made
Product Information Guide
Product Information Guide Electrical Conduit Fittings Interior & Exterior Coatings Phone: 281-405-8240 Fax: 281-405-8388 Email: Sales@nec-inc.com www.nec-inc.com Service - Quality Nipples, Elbows and Couplings,
10 Commercial, Industrial, Agricultural Services
10 Commercial, Industrial, Agricultural Services This section describes the Power Company requirements for commercial, industrial, and agricultural services. This section covers single phase and three
Myers Hubs. Standard Finishes: Aluminum: Natural Zinc: Natural Stainless: Natural
Applications: Myers Hubs are used in the termination of electrical circuits through wall of the enclosure Designed for use indoors or outdoors with rigid conduit and IMC Ideal for pharmaceutical, chemical
SUBMITTAL TRANSMITTAL OCPS CLAY SPRINGS ES REVIEWED SUBMITTAL NUMBER: SUBMITTAL DETAILS: CONTRACTOR/CM:
OCPS CLAY SPRINGS ES SUMITTAL DETAILS: SUJECT: CONDUIT UILDING REFERENCE: DATE RECIEVED: Oct 09, 204 DISCIPLINE: Electrical PRIORITY STATUS: 2-STANDARD SPECIFICATION REF: 26 05 REVIEWER DUE DATE: 0/2/204
CONDUIT BODIES CONDUIT BODIES. Phone:
i i Con it Bo ies allea le I on o i i I C con it cond ctors or p llin splicin Tapered threaded hu s - NPT Suita le or use in concrete Threaded LB Conduit Bodies MLB1 1/2 4-11/16 1-5/16 2-1/16 70 70.6 MLB2
Solar Combiner Solutions
Combiner Solutions Built to UL1741 standards NEMA 4X (fiberglass and stainless steel) NEMA 3R (painted steel) Made in America Combiners and disconnects that offer superior resistance and durability from
General Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
UNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.
UNDERGROUND SERVICE No meter base or entrance should be installed before an KREMC engineer has checked the proposed location. Entrance cabinet must be directly through wall or directly under meter in basement.
Spring Steel Fasteners
Conduit Supports 1 Available for 3/8 No tools needed! in. through 2 in. Finger friendly trade sizes for design! EMT, flexible conduit and MC/ AC cable Available with either a plain hole for 1/4 in. bolt
Champ MLL LED luminaires
The Champ MLL linear LED is specifically designed to replace fluorescent T12, T8 and T5HO lighting in harsh and hazardous applications. The rugged and durable design features the industry s most versatile
Steel Outlet Boxes 4 11 /16" Welded
Steel Outlet Boxes 4 11 /16" Welded Steel Outlet Boxes Features & Benefits Ideal for exposed work applications, providing an easy method for the installation of electrical devices (switches, receptacles,
WORK SMART. WORK WITH. Time-saving Electrical Products
WORK SMART. WORK WITH WHEATLAND. Time-saving Electrical Products TIME-SAVING ELECTRICAL PRODUCTS Save time and money on every job. When you work in electrical contracting, there are lots of challenges
NEW PRODUCTS HRANEC SHEET METAL INTRODUCES. FOR 2015! Call for. Pricing S P I R A L & O V A L M A N
HRANEC 724-437-2211 SHEET METAL INTRODUCES 2 NEW PRODUCTS Roof Ports systems are stocked for same day shipping, see page 4. FOR 2015! Call for Pricing O V A L M A N 724-437-2211 Made to order single wall
Ancillary Equipment FIG. 222 FIG. 283 FIG /10 ADJUSTABLE PIPE SUPPORT U BOLT (NON GRIPPED) U BOLT (GRIPPED) Material - Carbon Steel.
78 FIG. 222 FIG. 283 FIG. 1 04/ U BOLT (GRIPPED) Nom A C D T L Load 15 21.3 7 28 6 25 37 220 20 26.9 33 6 25 40 220 25 33.7 40 6 25 43 220 32 42.4 53 35 49 545 40 48.3 16 60 35 56 545 50 60.3 16 71 35
ENR Value Series Dead Front Interlocked Circuit Breaking Receptacles
ENR Value Series Dead Front Interlocked Circuit Breaking s Cl. I, Div. & 2, roups B, C, D Cl. II, Div. & 2, roups F, Cl. III, 7BCD, 9F, 2 Dust-Ignitionproof Raintight et Locations ENP Plugs Applications:
UNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.
UNDERGROUND SERVICE No meter base or entrance should be installed before an KREMC engineer has checked the proposed location. Entrance cabinet must be directly through wall or directly under meter in basement.
EBMC Combination Line Starters and Enclosures
EBMC Combination Line 3, 3R, 4, 4X, 7BCD, 9EFG, 12 Applications: Spectrum EBM hinged cover motor control enclosures are used: For general motor control and circuit protection indoors and outdoors in damp,
SECTION 300 OVERHEAD SERVICE
SECTION 300 OVERHEAD SERVICE 300.01 General Company provides, installs, and maintains service drop to point of delivery approved by Company. Customer provides point of attachment which is acceptable to
Pipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
LB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
One piece neoprene protective sleeve seals wiring area from dirt, grit and moisture.
Quik-Loc Connectors 600 Volt Standard Applications: Drills Shuttle cars Conveyors Power distribution Slusher hoists Motors Heavy equipment Ship-to-shore power Features: Corrosion-resistant - molded neoprene
N2MV Series W Non-metallic
N2MV Series 50-175W Non-metallic Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L Applications: N2MV series Champ
IMPORTANT RECEIVING INSTRUCTIONS:
Gardner Bender Instruction Sheet B2000 Cyclone Bender Serial Numbers Begining With E IMPORTANT RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found,
Device Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers
Device Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers Mulberry Outlet Box Covers New in this catalog: A full line of die-cast, powder painted conduit bodies: 1/2-4, threaded
+ + = K = K3. ADE cable gland accessories and kits. Ordering information: ADE external clamping module. ADE-4F and 5F lead sheath washer
E cable gland accessories and kits E external clamping module (available with all E glands) E-4F and 5F lead sheath washer Cable range Size For hexagon Width Thickness 2.8-5.5 5.0 8.0 5.0 CP804 4.0-8.5
Square-Duct Wireways. Catalog 5100CT0101R06/ Class CONTENTS Description... Page. Wireway Offerings... 3
Catalog 5100CT0101R06/11 2011 Class 5100 CONTENTS Description............................................. Page Wireway Offerings............................................ 3 General Purpose NEMA Type
ASAP Jr. A Strap and Pole. Magic Christmas. Walter Monkhouse. Alexandria, La.
ASAP Jr A Strap and Pole Walter Monkhouse Walter@MagicChristmas.org Magic Christmas Alexandria, La. Description The ASAP is a telescoping pole that mounts on a Portable Hole and can extend up to 19 feet
Trough, Wireway & Strut Attributes
Trough, Wireway & Strut Trough, Wireway & Strut Stahlin offers a broad range of auxiliary products designed to complement a full non metallic wiring system. Wire management through a corrosion resistant
Quality, durability and efficiency for every electrical installation
EMT & CONDUIT EMT & CONDUIT Quality, durability and efficiency for every electrical installation Since 1931, Wheatland Tube has manufactured high-quality electrical conduit that meets your needs, deadlines
INSTALLATION INSTRUCTION W Track Recessed 120V Flangeless
W Track Recessed 120V Flangeless WT4-RTL, WT8-RTL, WT12-RTL SAFETY INSTRUCTION Read all of these instructions before installing the track system. Turn off power at main switch before installing or modifying
MC-351, 421, 431, MC-4311
MC-35, 42, 43, MC-43 Three-Wire, Two Position Actuators General Instructions Applications For two-position operation of dampers or valves in heating, ventilating and air-conditioning systems and similar
BLFRITRI-09. Ruff-IN. Pre-Fab Systems
BLFRITRI-09 Ruff-IN Pre-Fab Systems Table of Contents Table of Contents................................................ 2 Introduction Ruff-IN & Total Ruff-IN Service Advisors..................... 3 Explanation
SECTION PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
Full Line EC&N Catalog: Elbows, Couplings & Nipples NORTH AMERICA S BEST-IN-CLASS ELBOWS, COUPLINGS & NIPPLES. years
Full Line EC&N Catalog: Elbows, Couplings & Nipples NORTH AMERICA S BEST-IN-CLASS ELBOWS, COUPLINGS & NIPPLES years We ve been connecting America Picoma is America s leading brand of steel elbows, couplings
BLFRITRI-09R. Ruff-IN. Pre-Fab Systems
BLFRITRI-09R Ruff-IN Pre-Fab Systems Table of Contents Table of Contents.................................................... 2 Ruff-IN & Total Ruff-IN Service Advisors....................... 3 Explanation
AMENDMENT ELECTRIC SERVICE MANUAL 2014
AMENDMENT (Pages 20,43,50,72,74,,76,78,83,86,99) ELECTRIC SERVICE MANUAL 2014 Effective April 1, 2015 18-7 6.0 SERVICE AND SERVICE ENTRANCES (General), Continued Conductor Sizing It is recommended that
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING Obtain acceptance and specific details from the local Company office. 1. Service entrance duct (see Note 1). Company
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications This table shows the optional items available on the different types of enclosures shown in this
Non-Metallic, Armored Cable, and Flexible Metallic Conduit Fittings
Non-Metallic Sheathed Cable and Portable Cord Connectors Non-Metallic Sheathed Cable Connectors Armored Cable and Flexible Connectors Armored Cable and Flexible Connectors Armored, Metal Clad, and Non-Metallic
229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
UNDERGROUND SERVICE. Items to consider. There will be charges from ComEd if you convert from overhead to underground service.
UNDERGROUND SERVCE tems to consider f your trenching route has to be dug by hand, or if a cable must be installed under a paved surface, additional charges apply. f your service cable has to be moved later
ROR Trailer Products Mechanical Suspension Parts List M, SM, SMT series suspensions
ROR Trailer Products Mechanical Suspension Parts List M, SM, SMT series suspensions M Series Suspensions 5 11 10 9 2 13 4 6 14 29 14 1 28 25 13 24 23 30 31 20 18 19 16 17 28 29 26 22 27 15 Hanger Brackets
SERIES 6LCDB79V Low Voltage LED Downlight
APPLICATION Low voltage LED lighting fixtures using remote driver platforms are ideally suited to applications that require easy access to LED drivers for routine maintenance and improved LED life and
49 AXLE CENTERS FOR 5 ROUND AXLES. Part FRONT HANGER STRADDLE MOUNT EQUALIZER BOLT 1-14 X 6-1/4
REYCO GRANNING MODEL 86/88 COMPONENTS 49 AXLE CENTERS FOR 5 ROUND AXLES Number Description 0046-20 FRONT HANGER STRADDLE MOUNT 12 00001-14 EQUALIZER BOLT 1-14 X 6-1/4 1 0084-00 FRONT HANGER UNDER MOUNT
Pentahead bolts See note 2. Conduit run as specified. Company facility. Refer to drawing SS8.6-2 or SS8.6-3 STANDARD SERVICE INSTALLATION
PULL BOX F SECONDARY SYSTEM Typical grade Pentahead bolts See note 2 Conduit run as specified Plastic or fiberglass for grass areas or Polymer concrete for light duty areas (see notes 2, 3, & 4) Company
MEH Series Sectionalizing Enclosures. Single-Phase and Three-Phase
MEH Series Sectionalizing Enclosures Single-Phase and Three-Phase ABB MEH Sectionalizing Enclosures ABB s MEH Sectionalizing Enclosures provide an economical and safe sectionalizing tap point for underground
FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors