Kindorf Stainless Steel Modular Framing System

Transcription

1 In this section... Kindorf Stainless Steel Modular Framing System Kindorf Stainless Steel Modular Framing System Overview... 6 Channels, Straps and Clamps... 7 Channel Fittings and Hardware

2 Overview Kindorf Modular Metal Framing System Saves You Money! Kindorf Channel The Kindorf Channel System is designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces. Uniqueness in Design The dimension in the channel, hole spacing and fittings means all parts fit together, no matter where they re used, or at what angle.this modular dimension provides maximum flexibility in field applications, saving inventory and labor dollars. Strength Even though the Kindorf channel is slightly smaller in dimensions, it supports the same weight as 5 8" channel. Compatibility with 5 8" Strut The Kindorf System is designed so that most accessories are compatible with 5 8" strut. Conduit and pipe straps will work equally well with 5 8" and strut. In addition, 8% of 5 8" accessories are interchangeable with Kindorf channel. Angle fittings can adapt easily to the open side of any 5 8" strut and the unique parallelogram nuts provide secure attachment to both types of strut. Full Line of Support Products The Kindorf channel system s many advantages are extended into a broad product offering including beam clamps, concrete inserts, lighting supports, cable cleats and a variety of threaded components. This, combined with a nationwide network of distributors and service centers, makes the Kindorf system a single source for supported metal-framing needs. 2 2 wide x deep 7 8" continuous open slot 0 ft. and 20 ft. lengths 6 Tel: Fax: Tel:

3 Channels, Straps and Clamps B-00 Channel x Length (FT.) B-00-0SS Type 04 0 B SS Type 6 0 Use H--B bolts and B-0-/2 or B--/2 stainless steel nuts for mounting fittings. Available 20 ft. lengths. B-05 Channel x holes on centers punched in channel base. Connection also by means of continuous slot Length (FT.) B-05-0SS Type 04 0 B SS Type 6 0 Use H--B bolts and B-0-/2 or B--/2 stainless steel nuts for mounting fittings. Scribe marks designate mid-point between holes for accurate field cutting. Available 20 ft. lengths. Straps for Rigid Conduit and Pipe Type 04 Stainless Steel C-05 rigid conduit or Pipe Size (In.) C-05-/2SS 2 C-05-/4SS C-05-SS C-05--/4SS C-05--/2SS 2 C-05-2SS 2 C-05-2-/2SS 2 2 C-05-SS C-05--/2SS 2 C-05-4SS 4 For Type 6 Stainless Steel, add 6 suffix. King Cobra One-Piece Cable and Pipe Clamps B-07 Channel x Connection by means of continuous slot or holes on centers Length (FT.) B-07-0SS Type 04 0 B-07-06SS Type 6 0 Available 20 ft. lengths. For EMT and Rigid Trade Cable O.D. Conduit Size (in.) Range (in.) Static Load Limit (lb) Safety Factor = 4 STD. CTN. Type 6 Stainless Steel KCPC050SS KCPC075SS KCPC00SS KCPC25SS KCPC50SS KCPC200SS KCPC250SS KCPC00SS KCPC50SS KCPC400SS Tel: Fax: Tel:

4 Channel Fittings and Hardware Fewer parts, less installation time and huge labor savings! Trapnut Strut Fastener The unique scissor action of the Trapnut Strut Fastener closes at any desired position on the threaded rod. Once closed, precision threads trap the rod for a sturdy hold that can be adjusted up or down for fine-tune positioning. While the versatile Trapnut Fastener has a locking pin that holds it in the desired position, it can also be removed and reused. Unlike a hex nut, there s no need to thread the Trapnut Fastener from either end of the rod, saving valuable time on the job. While the Trapnut Fastener is a time-saver for new work, it s invaluable for retrofit applications. Rather than disassembling an existing trapeze to run additional conduit above it, simply clamp the Trapnut Fastener between the trapeze and beam clamp for a speedy retrofit solution. It s ideal for applications where the rod ends aren t accessible. The Trapnut Fastener offers sturdy, loadbearing steel construction, so you can be confident of a solid installation. In addition, the Trapnut Fastener functions as a hex nut, square washer and flat washer all in one, so there are fewer parts to keep track of on the job. Takes 0% less time than the traditional method on new work* Takes 4% less time than the traditional method on retrofit applications* * Based on time study conducted by Thomas & Betts comparing the time to install 5 feet of 2" conduit with typical trapeze assemblies using washers and nuts versus Trapnut fasteners. Standard method using nuts and washers. New method using Trapnut Strut Fastener. Trapnut Fastener is Quick and Easy to Install Hold in the open position. No need to thread the Trapnut Fastener from either end of the rod saves valuable time Perfect for retrofit applications where the rod ends are not accessible 2 Insert the bottom plate on the rod and close the top plate. Precision threads trap the threaded rod for a sturdy hold that can be adjusted up or down for fine-tune positioning Functions as a hex nut, square washer and flat washer combined Press the pin with pliers. Locking pin holds Trapnut Fastener in the desired position Can be removed and reused Type 6 Stainless Steel Trapnut Fastener MATERIAL Size (In.) design Load Lbs. H22-/4-SS6 Type 6 Stainless Steel 50 H22-/8-SS6 Type 6 Stainless Steel 8 50 H22-/2-SS6 Type 6 Stainless Steel Tighten to the desired position with pliers. Can be adjusted up or down for fine-tuned positioning Sturdy, load-bearing stainless steel construction Sized to provide custom fit for either 5 8" or strut systems 8 Tel: Fax: Tel:

5 B-0 Series Channel Nuts For use with all Kindorf channels. Size (IN.) Thickness (IN.) Wt. lbs./c B 0 /4SS B-0-5/6SS B-0-/8SS B-0-/2SS 2 8. Load Ratings for B-0 Strut Nuts Channel Nut Sizes (In.) B- Series Spring Channel Nuts Slip Test Rating Pull Test Rating , If connections will be subjected to dynamic or seismic loading conditions, contact the factory for design assistance.. All ratings have safety factor of applied. 2. Load ratings are for static applications. Self-holding clamping nut with spring attached. For use with deep channels. Size (In.) Thickness (In.) lbs./c B--/8-SS B--/2-SS B--SN Series Spring Stud Channel Nuts B--/8-SN, Stud: 8 Dia., " Long and B--/8-SN2, Stud: 8 Dia., Long Accepts Kindorf Nuts H-4C (hex), H-6-C (square). B--/2-SN, Stud: 2 Dia., " Long and B--/2-SN2, Stud: 2 Dia., Long. Accepts Kindorf Nuts H-4D (hex), H-6-D (square) Size (IN.) Thickness (IN.) Wt. lbs./c B /8 SNSS B--/8-SN2SS B--/2-SNSS B--/2-SN2SS B-2 Series Spring Channel Nuts Self-holding clamping nut with spring attached. For use with deep channels. Stud nut self-holding clamping nut with spring attached. BC-0 Series Universal Nylon Cone Nut Sizes:, 8" and 2" For all 5 8" and channels May be used with ALL strut depths Size (IN.) BC0 /4SS 20 BC0 /8SS 8 6 BC0 /2SS 2 B-4 Series Square nuts for use with channel and spot-type concrete inserts. Size (IN.) Thickness (IN.) Wt. lbs./c B 4 /4SS B-4-/8SS B-4-/2SS B-4-5/8SS B-4-/4SS B-4-7/8SS B-4-/8PSS 8 8* B-4-/2PSS 2 4* 8.00 * Standard Pipe Threads. AB-24L Series Located Square Washers Sq. Bolt Size (In.) Std. Ctn. AB-24L-/4SS 00 AB-24L-5/6SS AB-24L-/8SS 8 00 AB-24L-/2SS 2 00 AB-24L-5/8SS AB-24 Series Square Washers Sq. 6 Sq. Size (IN.) Thickness (IN.) Wt. lbs./c B 2 /4SS B-2-5/6SS B-2-/8SS B-2-/2SS Bolt Size (In.) Std. Ctn. AB-24-/4SS 00 AB-24-5/6SS AB-24-/8SS 8 00 AB-24-/2SS 2 00 AB-24-5/8SS Note: All hardware shown here is made of Type 04 stainless steel. For Type 6, substitute SS6 suffix for SS suffix at the end of catalog number. Tel: Fax: Tel:

6 B-5 Two-Hole Angle Connector B 5SS Type 04 B-5SS6 Type 6 2 Can also be used as side-beam connector to suspend 2 hanger rod. Can also be used as side beam connector to suspend hanger rod B 7SS Type 04 B-7SS6 Type 6 B-6 Three-Hole Angle Connector B-8 Left-Hand Gusset Connector B-7 Five-Hole Angle Connector " B 6SS Type 04 B-6HDSS6 Type 6 B 8SS Type 04 B-8SS6 Type 6 40 Tel: Fax: Tel:

7 B- Right-Hand Gusset Connector B SS Type 04 B-SS6 Type 6 B-20 End Connector 2" 2 ga. B-2 Two-Side Corner Connector B 2SS Type 04 B 2SS6 Type 6 B-22 Opposite-Side Angle Connector B 22SS Type 04 B 22SS6 Type 6 2" " B-2 Three-Side Angle Connector 6 B 20SS Type 04 B 20SS6 Type 6 B 2SS Type 04 B 2SS6 Type 6 Tel: Fax: Tel:

8 B-24 Post Base Connector B 24SS Type 04 B-24SS6 Type 6 For use with x channels. B-24FL Post Base Connector 4 B 24FLSS Type 04 B-24-FLSS6 Type 6 4 " 5 8" " " (4) Dia. Holes () Dia. Holes B-25 Post Base Connector B-25SS Type 04 B-25SS6 Type 6 B-25FL Post Base Connector B-25FLSS Type 04 B-25FLSS6 Type 6 B-25SQ Post Base Connector 4 7" Dia. Holes 4 " " " (4) Dia. Holes B-24SQ Post Base Connector (4) Dia. Holes 2" 4 Holes Dia. 2" 4 4 7" 4 4 B 24SQSS Type 04 B-24SQEGSS6 Type 6 B-25SQSS Type 04 B-25SQSS6 Type 6 42 Tel: Fax: Tel:

9 B- Five-Hole Joint Connector B SS Type 04 B SS6 Type 6 B-4 Outside Corner Connector " " 2 B 4SS Type 04 B 4SS6 Type 6 " 4 B-6 Angle Plate Connector B 6SS Type 04 B-6SS6 Type 6 B-7 T-Plate Connector B 7SS Type 04 B 7SS6 Type 6 " 4" " B-5 Three-Hole Plate Connector B-8 Open Angle Connector 45 B 5SS Type 04 B-5SS6 Type 6 B 8SS Type 04 B 8SS6 Type 6 Tel: Fax: Tel:

10 B-57 Wing Connector B 57SS Type 04 B 57SS6 Type 6 B-58L Wing Connector B 58LSS Type 04 B 58LSS6 Type 6 B-58R Wing Connector B 58RSS Type 04 B 58RSS6 Type 6 B-60 Plate Connector 7 2" 7 2" 7 2" B-62 Plate Connector B-62SS Type 04 B-62SS6 Type 6 B-64 Plate Connector B-64SS Type 04 B-64SS6 Type 6 B-65 Plate Connector B-65SS Type 04 B-65SS6 Type 6 B-66 Plate Connector " " " 4 2 B 60SS Type 04 B 60SS6 Type 6 " B-66SS Type 04 B-66SS6 Type 6 B-6 Plate Connector B-67 Plate Connector " 7 2" B 6SS Type 04 B 6SS6 Type 6 B-67SS Type 04 B-67SS6 Type 6 44 Tel: Fax: Tel: